The following list outlines the Masstran outputs available through the AIM interface.

• Area = Total area of the mesh.
• Mass = Total mass of the model.
• Centroid = Centroid of the model.
• CG = Center of gravity of the model.
• Ixx = Moment of inertia
• Iyy = Moment of inertia
• Izz = Moment of inertia
• Ixy = Moment of inertia
• Izy = Moment of inertia
• Iyz = Moment of inertia
• I_Vector = Moment of inertia vector

  \[ \vec{I} = \begin{bmatrix} I_{xx} & I_{yy} & I_{zz} & I_{xy} & I_{xz} & I_{yz} \end{bmatrix} \]

• I_Lower = Moment of inertia lower triangular tensor

  \[ \vec{I}_{lower} = \begin{bmatrix} I_{xx} & -I_{xy} & I_{yy} & -I_{xz} & -I_{yz} & I_{zz} \end{bmatrix}, \]

• I_Upper = Moment of inertia upper triangular tensor

  \[ \vec{I}_{upper} = \begin{bmatrix} I_{xx} & -I_{xy} & -I_{xz} & I_{yy} & -I_{yz} & I_{zz} \end{bmatrix}, \]

• I_Tensor = Moment of inertia tensor

  \[ \bar{\bar{I}} = \begin{bmatrix} I_{xx} & -I_{xy} & -I_{xz} \\ -I_{xy} & I_{yy} & -I_{yz} \\ -I_{xz} & -I_{yz} & I_{zz} \end{bmatrix} \]

• MassProp = JSON String Mass Properties
• MassPropLink = Mass Properties Mass properties that can be linked to analysis input MassPropLink