Console Output

Skipping 2,852 KB.. Full Log
                          Body     26 created  (toler= 5.0000e-06, nnode=  63, nedge= 137, nface=  99)
    executing [1303] ifthen:             1.00000  EQ      1.00000  and      0.00000  eq      0.00000
    executing [1304] udprim:     editAttr filename tmp_OpenCSM_00/03 (compiled code)
    processing:             FACE ADJ2EDGE tagType=leadingEdge

    processing:             SET           capsIgnore=true

    processing:     

    processing:             FACE HAS      tagType=trailingEdge

    processing:             SET           capsIgnore=true

    processing:     

    processing:             FACE ADJ2FACE tagType=trailingEdge

    processing:             ANDNOT HAS    tagType=rib

    processing:             ANDNOT HAS    tagType=tip

    processing:             SET           capsIgnore=true

    processing:     

    processing:             FACE ADJ2EDGE tagType=trailingEdge

    processing:             SET           capsIgnore=true

WARNING:: toler =   5.0000e-06 for UDPRIM
                          Body     27 created  (toler= 5.0000e-06, nnode=  63, nedge= 137, nface=  99)
    executing [1305] udprim:     editAttr filename tmp_OpenCSM_00/04 (compiled code)
    processing:             FACE HAS        tagComp=leftWing

    processing:             ANDNOT ADJ2EDGE tagType=leadingEdge

    processing:             ANDNOT ADJ2EDGE tagType=trailingEdge

    processing:             ANDNOT ADJ2FACE tagType=trailingEdge

    processing:             SET             capsGroup=leftWingSkin

    processing:     

    processing:             FACE HAS        tagComp=riteWing

    processing:             ANDNOT ADJ2EDGE tagType=leadingEdge

    processing:             ANDNOT ADJ2EDGE tagType=trailingEdge

    processing:             ANDNOT ADJ2FACE tagType=trailingEdge

    processing:             SET             capsGroup=riteWingSkin

    processing:     

    processing:             FACE HAS        tagType=rib

    processing:             SET             capsGroup=wingRib

    processing: 

    processing:             FACE HAS        tagType=tip

    processing:             SET             capsGroup=wingRib

    processing:   

    processing:             FACE HAS        tagType=spar tagIndex=1

    processing:             SET             capsGroup=wingSpar1

    processing:             SET             capsMesh=wingSpar1

    processing: 

    processing:             FACE HAS        tagType=spar tagIndex=2

    processing:             SET             capsGroup=wingSpar2

    processing:             SET             capsMesh=wingSpar2

WARNING:: toler =   5.0000e-06 for UDPRIM
                          Body     28 created  (toler= 5.0000e-06, nnode=  63, nedge= 137, nface=  99)
    executing [1309] udprim:     editAttr filename tmp_OpenCSM_00/06 (compiled code)
    processing:         FACE HAS      tagType=upper

    processing:         SET           capsBound=upperWing

    processing: 

    processing:         FACE HAS      tagType=lower

    processing:         SET           capsBound=lowerWing

    processing: 

    processing:         FACE HAS      tagType=tip tagIndex=1

    processing:         SET           capsBound=leftTip

    processing: 

    processing:         FACE HAS      tagType=tip tagIndex=2

    processing:         SET           capsBound=riteTip

WARNING:: toler =   5.0000e-06 for UDPRIM
                          Body     29 created  (toler= 5.0000e-06, nnode=  63, nedge= 137, nface=  99)
    executing [1310] udprim:     editAttr filename tmp_OpenCSM_00/07 (compiled code)
    processing:         NODE ADJ2FACE tagComp=leftWing tagType=tip

    processing:         AND  ADJ2FACE tagType=lower

    processing:         AND  ADJ2FACE tagType=spar tagIndex=1

    processing:         SET           capsLoad=leftPointLoad

    processing: 

    processing:         NODE ADJ2FACE tagComp=riteWing tagType=tip

    processing:         AND  ADJ2FACE tagType=lower

    processing:         AND  ADJ2FACE tagType=spar tagIndex=1

    processing:         SET           capsLoad=ritePointLoad

WARNING:: toler =   5.0000e-06 for UDPRIM
                          Body     30 created  (toler= 5.0000e-06, nnode=  63, nedge= 137, nface=  99)
    executing [1311] select:   edge  tagType  leadingEdge  *  *  *  *
    executing [1312] dimension:     leadingEdges      1.00000      8.00000
    executing [1313] set:            leadingEdges  @sellist
                          leadingEdges[1,1] =     8.00000     0.00000
                          leadingEdges[1,2] =    31.00000     0.00000
                          leadingEdges[1,3] =    33.00000     0.00000
                          leadingEdges[1,4] =    62.00000     0.00000
                          leadingEdges[1,5] =    64.00000     0.00000
                          leadingEdges[1,6] =    94.00000     0.00000
                          leadingEdges[1,7] =    96.00000     0.00000
                          leadingEdges[1,8] =   121.00000     0.00000
    executing [1314] patbeg:         i      8.00000
                          pattern counter: i =   1
    executing [1315] select:   edge  8
                     putting Branch Attributes on Edge 8
    executing [1316] patend:
                          pattern counter: i =   2
    executing [1315] select:   edge  31
                     putting Branch Attributes on Edge 31
    executing [1316] patend:
                          pattern counter: i =   3
    executing [1315] select:   edge  33
                     putting Branch Attributes on Edge 33
    executing [1316] patend:
                          pattern counter: i =   4
    executing [1315] select:   edge  62
                     putting Branch Attributes on Edge 62
    executing [1316] patend:
                          pattern counter: i =   5
    executing [1315] select:   edge  64
                     putting Branch Attributes on Edge 64
    executing [1316] patend:
                          pattern counter: i =   6
    executing [1315] select:   edge  94
                     putting Branch Attributes on Edge 94
    executing [1316] patend:
                          pattern counter: i =   7
    executing [1315] select:   edge  96
                     putting Branch Attributes on Edge 96
    executing [1316] patend:
                          pattern counter: i =   8
    executing [1315] select:   edge  121
                     putting Branch Attributes on Edge 121
    executing [1316] patend:
    executing [1317] udprim:     editAttr filename tmp_OpenCSM_00/08 (compiled code)
    processing:         FACE ADJ2EDGE tagComp=leftWing

    processing:         SET           tagTemp=leadingEdgeFace

WARNING:: toler =   5.0000e-06 for UDPRIM
                          Body     31 created  (toler= 5.0000e-06, nnode=  63, nedge= 137, nface=  99)
    executing [1318] udprim:     editAttr filename tmp_OpenCSM_00/09 (compiled code)
    processing:         EDGE ADJ2FACE tagTemp=leadingEdgeFace

    processing:         AND  ADJ2FACE tagComp=rootWing

    processing:         SET           capsMesh=rootLeadingEdge

WARNING:: toler =   5.0000e-06 for UDPRIM
                          Body     32 created  (toler= 5.0000e-06, nnode=  63, nedge= 137, nface=  99)
    executing [1319] ifthen:             0.00000  EQ      1.00000  and  ...
    executing [1322] ifthen:             1.00000  EQ      1.00000  and      0.00000  eq      0.00000
    executing [1323] udprim:     editAttr filename tmp_OpenCSM_00/11 (compiled code)
    processing:             FACE HAS      tagComp=rootWing

    processing:             SET           capsConnectLink=ribRoot

    processing:        

    processing:             EDGE ADJ2FACE tagComp=rootWing

    processing:             SET  capsConnectLink=ribRoot

    processing:     

    processing:             NODE ADJ2FACE tagComp=rootWing

    processing:             SET  capsConnectLink=ribRoot

WARNING:: toler =   5.0000e-06 for UDPRIM
                          Body     33 created  (toler= 5.0000e-06, nnode=  63, nedge= 137, nface=  99)
    executing [1325] udprim:     editAttr filename tmp_OpenCSM_00/12 (compiled code)
    processing:         FACE HAS      tagComp=leftWing tagType=upper

    processing:         AND  ADJ2EDGE tagType=leadingEdge

    processing:         AND  ADJ2FACE tagComp=riteWing

    processing:         SET           tagCsys=leftWing

    processing: 

    processing:         FACE HAS      tagComp=riteWing tagType=upper

    processing:         AND  ADJ2EDGE tagType=leadingEdge

    processing:         AND  ADJ2FACE tagComp=leftWing

    processing:         SET           tagCsys=riteWing

WARNING:: toler =   5.0000e-06 for UDPRIM
                          Body     34 created  (toler= 5.0000e-06, nnode=  63, nedge= 137, nface=  99)
    executing [1326] select:   face  tagCsys  leftWing  *  *  *  *
    executing [1327] set:            leftWingSkinCsys  @sellist
                          leftWingSkinCsys =    27.00000     0.00000
    executing [1328] select:   face  tagCsys  riteWing  *  *  *  *
    executing [1329] set:            riteWingSkinCsys  @sellist
                          riteWingSkinCsys =     8.00000     0.00000
    executing [1330] store:      WingStruct      0.00000      0.00000
                          Body     34 stored
    executing [1331] restore:    WingStruct      0.00000
                          Body     35 restored (toler= 5.0000e-06, nnode=  63, nedge= 137, nface=  99)
    executing [1332] store:      WingStruct      0.00000      0.00000
WARNING:: storage WingStruct (0) is being overwritten
                          Body     35 stored
    executing [1334] restore:    WingStruct      0.00000
                          Body     36 restored (toler= 5.0000e-06, nnode=  63, nedge= 137, nface=  99)
    executing [1335] select:   body
                    putting Branch Attributes on Body
    executing [1336] ifthen:             1.00000  EQ      1.00000  and      0.00000  eq      0.00000
    executing [1337] point:          0.40344      0.00000      0.00000
                          Body     37 created
    executing [1339] end:
    executing [1341] ifthen:             0.00000  NE      0.00000  and  ...
    executing [1378] end:
    finalizing:
==> Profile information
    Branch type           ncall  time (sec)    pct
    dimension                 1       0.005    0.0
    point                     1       0.027    0.2
    udprim                   14       1.461   11.0
    restore                   8       0.132    1.0
    rule                      1       0.159    1.2
    intersect                 1       1.072    8.1
    subtract                  1       2.780   20.9
    union                     1       5.719   43.0
    join                      1       0.217    1.6
    extract                   1       1.253    9.4
    translate                 2       0.029    0.2
    rotatex                   2       0.006    0.0
    rotatey                   1       0.003    0.0
    scale                     2       0.008    0.1
    mirror                    1       0.058    0.4
    interface                 3       0.002    0.0
    end                       3       0.020    0.2
    set                      60       0.087    0.7
    udparg                    3       0.003    0.0
    select                   23       0.153    1.1
    store                     6       0.010    0.1
    patbeg                    1       0.003    0.0
    patend                    8       0.040    0.3
    ifthen                   43       0.066    0.5
    else                      2       0.000    0.0
    endif                    43       0.000    0.0
    catbeg                    1       0.001    0.0
    catend                    1       0.000    0.0
    mark                      1       0.000    0.0
    Total                   236      13.314
Mapping capsGroup attributes ................
	Number of unique capsGroup attributes = 6
	Name = wingSpar1, index = 1
	Name = riteWingSkin, index = 2
	Name = wingRib, index = 3
	Name = leftWingSkin, index = 4
	Name = wingSpar2, index = 5
	Name = ribSupport, index = 6
Mapping capsMesh attributes ................
	Number of unique capsMesh attributes = 4
	Name = wingSpar1, index = 1
	Name = wingSpar2, index = 2
	Name = leadingEdge, index = 3
	Name = rootLeadingEdge, index = 4
Getting surface mesh for body 1 (of 2)
	Tessellating body
	capsIgnore attribute found for face - 3!!
	capsIgnore attribute found for face - 8!!
	capsIgnore attribute found for face - 15!!
	capsIgnore attribute found for face - 16!!
	capsIgnore attribute found for face - 17!!
	capsIgnore attribute found for face - 18!!
	capsIgnore attribute found for face - 26!!
	capsIgnore attribute found for face - 27!!
	capsIgnore attribute found for face - 33!!
	capsIgnore attribute found for face - 36!!
	capsIgnore attribute found for face - 37!!
	capsIgnore attribute found for face - 38!!
	capsIgnore attribute found for face - 39!!
	capsIgnore attribute found for face - 40!!
	capsIgnore attribute found for face - 41!!
	capsIgnore attribute found for face - 42!!
	capsIgnore attribute found for face - 50!!
	capsIgnore attribute found for face - 51!!
	capsIgnore attribute found for face - 52!!
	capsIgnore attribute found for face - 58!!
	capsIgnore attribute found for face - 61!!
	capsIgnore attribute found for face - 62!!
	capsIgnore attribute found for face - 63!!
	capsIgnore attribute found for face - 64!!
	capsIgnore attribute found for face - 65!!
	capsIgnore attribute found for face - 66!!
	capsIgnore attribute found for face - 73!!
	capsIgnore attribute found for face - 74!!
	capsIgnore attribute found for face - 75!!
	capsIgnore attribute found for face - 81!!
	capsIgnore attribute found for face - 83!!
	capsIgnore attribute found for face - 84!!
	capsIgnore attribute found for face - 85!!
	capsIgnore attribute found for face - 86!!
	capsIgnore attribute found for face - 89!!
	capsIgnore attribute found for face - 90!!
	capsIgnore attribute found for face - 91!!
	capsIgnore attribute found for face - 96!!
	capsIgnore attribute found for face - 97!!
	capsIgnore attribute found for face - 98!!
Number of nodes = 299
Number of elements = 387
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 0
Number of quadrilateral elements = 387
Getting surface mesh for body 2 (of 2)
	Tessellating body
Number of nodes = 1
Number of elements = 1
Number of node elements = 1
Number of line elements = 0
Number of triangle elements = 0
Number of quadrilateral elements = 0
----------------------------
Total number of nodes = 300
Total number of elements = 388
Analysis directory does not currently exist - it will be made automatically
 CAPS Info: No symbol for aimExecute in astrosAIM
 CAPS Info: No symbol for aimCheck in astrosAIM
 CAPS Info: No symbol for aimData in astrosAIM
 CAPS Info: No symbol for aimSensitivity in astrosAIM

==> Running ASTROS pre-analysis...
Mapping Csys attributes ................
	Number of unique Csys attributes = 2
	Name = leftWingSkin, index = 1
	Name = riteWingSkin, index = 2

Getting FEA coordinate systems.......
	Number of coordinate systems - 2
	Coordinate system name - leftWingSkin
	Coordinate system name - riteWingSkin
Mapping capsConstraint attributes ................
	Number of unique capsConstraint attributes = 1
	Name = ribRootPoint, index = 1
Mapping capsLoad attributes ................
	Number of unique capsLoad attributes = 2
	Name = ritePointLoad, index = 1
	Name = leftPointLoad, index = 2
Mapping capsBound attributes ................
	Number of unique capsBound attributes = 4
	Name = lowerWing, index = 1
	Name = upperWing, index = 2
	Name = riteTip, index = 3
	Name = leftTip, index = 4
Mapping capsConnect attributes ................
	Number of unique capsConnect attributes = 1
	Name = ribRoot, index = 1
Mapping capsResponse attributes ................
	Number of unique capsResponse attributes = 0
Found link for attrMap (Attribute_Map) from parent
Found link for a Surface mesh from parent
capsIgnore attribute found. Removing unneeded nodes and elements from mesh!
Removing unused nodes...
	Removed 64 (out of 299) unused nodes!
Setting FEA Data
	Mesh for body = 0
	Number of nodal coordinates = 235
	Number of elements = 227
	Elemental Nodes = 0
	Elemental Rods  = 0
	Elemental Tria3 = 0
	Elemental Quad4 = 227
Setting FEA Data
	Mesh for body = 1
	Number of nodal coordinates = 1
	Number of elements = 1
	Elemental Nodes = 1
	Elemental Rods  = 0
	Elemental Tria3 = 0
	Elemental Quad4 = 0
Combining multiple FEA meshes!
	Combined Number of nodal coordinates = 236
	Combined Number of elements = 228
	Combined Elemental Nodes = 1
	Combined Elemental Rods  = 0
	Combined Elemental Tria3 = 0
	Combined Elemental Quad4 = 227

Getting FEA materials.......
	Number of materials - 2
	Material name - Unobtainium
	No "materialType" specified for Material tuple Unobtainium, defaulting to "Isotropic"
	Material name - Madeupium
	Done getting FEA materials

Getting FEA properties.......
	Number of properties - 6
	Property name - leftWingSkin
	Property name - riteWingSkin
	Property name - wingRib
	Property name - wingSpar1
	Property name - wingSpar2
	Property name - ribSupport
	Done getting FEA properties
Updating mesh element types based on properties input

Getting FEA constraints.......
	Number of constraints - 1
	Constraint name - ribConstraint
	No "constraintType" specified for Constraint tuple ribConstraint, defaulting to "ZeroDisplacement"
	Done getting FEA constraints

Getting FEA supports.......
	Number of supports - 1
	Support name - ribSupport
	Done getting FEA supports

Getting FEA connections.......
	Number of connection tuples - 1
	Connection name - ribRoot
	No "groupName" specified for Connection tuple ribRoot!
	Looking for automatic connections from the use of capsConnectLink for ribRoot
	19 automatic connections were made for capsConnect ribRoot (node id 300)
	Done getting FEA connections
Load tuple is NULL - No loads applied
Design_Variable tuple is NULL - No design variables applied
Design_Constraint tuple is NULL - No design constraints applied

Getting FEA analyses.......
	Number of analyses - 1
	Analysis name - EigenAnalysis
	Done getting FEA analyses

Writing Astros grid and connectivity file (in large field format) ....
Finished writing Astros grid file

Writing subElement types (if any) - appending mesh file
Writing connection cards - appending mesh file

Writing Astros instruction file....
	Warning: No constraints specified for case EigenAnalysis, assuming all constraints are applied!!!!
	Writing analysis cards
	Writing constraint cards--all constraints for each subcase
	Writing support cards
	Writing material cards
	Writing property cards
	Writing coordinate system cards

==> Running Astros...
Note: The following floating-point exceptions are signalling: IEEE_INVALID_FLAG IEEE_DENORMAL
Reading Astros OUT file - extracting Eigen-Values!
	Number of Eigen-Values = 10
	Loading Eigen-Value = 1
	Loading Eigen-Value = 2
	Loading Eigen-Value = 3
	Loading Eigen-Value = 4
	Loading Eigen-Value = 5
	Loading Eigen-Value = 6
	Loading Eigen-Value = 7
	Loading Eigen-Value = 8
	Loading Eigen-Value = 9
	Loading Eigen-Value = 10

--> Eigen-frequencies:
    1 : 0.0357647
    2 : 0.0533161
    3 : 0.102451
    4 : 0.102496
    5 : 0.159637
    6 : 0.211734
    7 : 0.215446
    8 : 0.223928
    9 : 0.350115
    10: 0.432754
--> temporary directory "tmp_OpenCSM_00" removed
 Cleaning up egadsInstance - 0
 Cleaning up astrosInstance - 0
 EGADS Info: 861 Objects, 1379 Reference in Use (of 34601) at Close!

real	0m24.147s
user	0m0.155s
sys	0m0.405s
+ status=0
+ set +x

=================================================
data/session10/astros_2_ModalSupport.py passed (as expected)
=================================================


=================================================
astros_3_StaticClamped.py test;
+ python astros_3_StaticClamped.py
+ tee -a /c/Users/jenkins/workspace/ESP_QuickTestCaps/7.4/CAPS/training/WIN64.2017/CAPS/training/training.log

==> Loading geometry from file "..\ESP\wing3.csm"...
Definition of "kt" in "\Users\jenkins\workspace\ESP_QuickTestCaps\7.4\CAPS\training\WIN64.2017\ESP\udunits\/udunits2-common.xml", line 90, overrides prefixed-unit "1000000 kilogram"
Definition of "microns" in "\Users\jenkins\workspace\ESP_QuickTestCaps\7.4\CAPS\training\WIN64.2017\ESP\udunits\/udunits2-common.xml", line 336, overrides prefixed-unit "1e-15 second"
Definition of "ft" in "\Users\jenkins\workspace\ESP_QuickTestCaps\7.4\CAPS\training\WIN64.2017\ESP\udunits\/udunits2-common.xml", line 433, overrides prefixed-unit "1e-12 kilogram"
Definition of "yd" in "\Users\jenkins\workspace\ESP_QuickTestCaps\7.4\CAPS\training\WIN64.2017\ESP\udunits\/udunits2-common.xml", line 441, overrides prefixed-unit "8.64e-20 second"
Definition of "pt" in "\Users\jenkins\workspace\ESP_QuickTestCaps\7.4\CAPS\training\WIN64.2017\ESP\udunits\/udunits2-common.xml", line 655, overrides prefixed-unit "1e-09 kilogram"
Definition of "at" in "\Users\jenkins\workspace\ESP_QuickTestCaps\7.4\CAPS\training\WIN64.2017\ESP\udunits\/udunits2-common.xml", line 1052, overrides prefixed-unit "1e-15 kilogram"
Definition of "ph" in "\Users\jenkins\workspace\ESP_QuickTestCaps\7.4\CAPS\training\WIN64.2017\ESP\udunits\/udunits2-common.xml", line 1571, overrides prefixed-unit "3.6e-09 second"
Definition of "nt" in "\Users\jenkins\workspace\ESP_QuickTestCaps\7.4\CAPS\training\WIN64.2017\ESP\udunits\/udunits2-common.xml", line 1578, overrides prefixed-unit "1e-06 kilogram"
--> enter ocsmCheck()
--> checks passed
--> enter ocsmSave(filename=capsTmp.cpc)
--> enter ocsmCheck()
--> checks passed
 CAPS Info: No symbol for aimDiscr in egadsTessAIM
 CAPS Info: No symbol for aimFreeDiscr in egadsTessAIM
 CAPS Info: No symbol for aimLocateElement in egadsTessAIM
 CAPS Info: No symbol for aimUsesDataSet in egadsTessAIM
 CAPS Info: No symbol for aimCheck in egadsTessAIM
 CAPS Info: No symbol for aimTransfer in egadsTessAIM
 CAPS Info: No symbol for aimInterpolation in egadsTessAIM
 CAPS Info: No symbol for aimInterpolateBar in egadsTessAIM
 CAPS Info: No symbol for aimIntegration in egadsTessAIM
 CAPS Info: No symbol for aimIntegrateBar in egadsTessAIM
 CAPS Info: No symbol for aimSensitivity in egadsTessAIM

==> Generating Mesh...
--> enter ocsmBuild(buildTo=0)
--> enter ocsmCheck()
--> checks passed

    Interim EGADS version  1.19 (with  OpenCASCADE 7.4.1)

    executing [   1] udprim:     $/capsHeader (scripted code)
              [   2] interface:  .  ALL      0.00000
    executing [   3] set:            makeFuseOml  0
                          makeFuseOml =     0.00000     0.00000
    executing [   4] set:            makeFuseWaffle  0
                          makeFuseWaffle =     0.00000     0.00000
    executing [   5] set:            makeFuseCmass  0
                          makeFuseCmass =     0.00000     0.00000
    executing [   6] set:            makeWingOml  0
                          makeWingOml =     0.00000     0.00000
    executing [   7] set:            makeWingHinge  0
                          makeWingHinge =     0.00000     0.00000
    executing [   8] set:            makeWingWaffle  0
                          makeWingWaffle =     0.00000     0.00000
    executing [   9] set:            makeWingCmass  0
                          makeWingCmass =     0.00000     0.00000
    executing [  10] set:            makeHtailOml  0
                          makeHtailOml =     0.00000     0.00000
    executing [  11] set:            makeHtailHinge  0
                          makeHtailHinge =     0.00000     0.00000
    executing [  12] set:            makeHtailWaffle  0
                          makeHtailWaffle =     0.00000     0.00000
    executing [  13] set:            makeHtailCmass  0
                          makeHtailCmass =     0.00000     0.00000
    executing [  14] set:            makeVtailOml  0
                          makeVtailOml =     0.00000     0.00000
    executing [  15] set:            makeVtailHinge  0
                          makeVtailHinge =     0.00000     0.00000
    executing [  16] set:            makeVtailWaffle  0
                          makeVtailWaffle =     0.00000     0.00000
    executing [  17] set:            makeVtailCmass  0
                          makeVtailCmass =     0.00000     0.00000
    executing [  18] set:            makePylonOml  0
                          makePylonOml =     0.00000     0.00000
    executing [  19] set:            makePodOml  0
                          makePodOml =     0.00000     0.00000
    executing [  20] set:            SHARP_TE  0
                          SHARP_TE =     0.00000     0.00000
    executing [  21] ifthen:             0.00000  EQ      1.00000  and  ...
    executing [  24] ifthen:             0.00000  NE      0.00000  and  ...
    executing [  40] ifthen:             0.00000  EQ      1.00000  and  ...
    executing [  43] ifthen:             0.00000  NE      0.00000  and  ...
    executing [  51] ifthen:             0.00000  EQ      1.00000  and  ...
    executing [  54] ifthen:             0.00000  NE      0.00000  and  ...
    executing [  65] ifthen:             0.00000  EQ      1.00000  and  ...
    executing [  68] ifthen:             0.00000  NE      0.00000  and  ...
    executing [  79] ifthen:             0.00000  EQ      1.00000  and  ...
    executing [  82] ifthen:             0.00000  EQ      1.00000  and  ...
    executing [  85] ifthen:             0.00000  EQ      1.00000  and  ...
    executing [  88] ifthen:             1.00000  NE      0.00000  OR  ...
    executing [  89] set:            makeWingOml  1
                          makeWingOml =     1.00000     0.00000
    executing [  90] set:            makeWingWaffle  1
                          makeWingWaffle =     1.00000     0.00000
    executing [  92] ifthen:             0.00000  EQ      1.00000  and  ...
    executing [  95] ifthen:             0.00000  NE      0.00000  and  ...
    executing [ 101] ifthen:             1.00000  EQ      1.00000  and      0.00000  eq      0.00000
    executing [ 102] set:            COMP:Fuse  0
                          COMP:Fuse =     0.00000     0.00000
    executing [ 104] ifthen:             0.00000  EQ      1.00000  and  ...
    executing [ 107] ifthen:             1.00000  EQ      1.00000  and      0.00000  eq      0.00000
    executing [ 108] set:            COMP:Htail  0
                          COMP:Htail =     0.00000     0.00000
    executing [ 110] ifthen:             1.00000  EQ      1.00000  and      0.00000  eq      0.00000
    executing [ 111] set:            COMP:Vtail  0
                          COMP:Vtail =     0.00000     0.00000
    executing [ 113] ifthen:             1.00000  EQ      1.00000  and      0.00000  eq      0.00000
    executing [ 114] set:            COMP:Pylon  0
                          COMP:Pylon =     0.00000     0.00000
    executing [ 116] ifthen:             1.00000  EQ      1.00000  and      0.00000  eq      0.00000
    executing [ 117] set:            COMP:Pod  0
                          COMP:Pod =     0.00000     0.00000
    executing [ 119] ifthen:             1.00000  EQ      1.00000  and      0.00000  eq      0.00000
    executing [ 120] set:            COMP:Control  0
                          COMP:Control =     0.00000     0.00000
    executing [ 122] ifthen:             0.00000  EQ      0.00000  and      0.00000  eq      0.00000
    executing [ 123] set:            makeFuseOml  0
                          makeFuseOml =     0.00000     0.00000
    executing [ 124] set:            makeFuseWaffle  0
                          makeFuseWaffle =     0.00000     0.00000
    executing [ 125] set:            makeFuseCmass  0
                          makeFuseCmass =     0.00000     0.00000
    executing [ 127] ifthen:             1.00000  EQ      0.00000  and  ...
    executing [ 133] ifthen:             0.00000  EQ      0.00000  and      0.00000  eq      0.00000
    executing [ 134] set:            makeHtailOml  0
                          makeHtailOml =     0.00000     0.00000
    executing [ 135] set:            makeHtailHinge  0
                          makeHtailHinge =     0.00000     0.00000
    executing [ 136] set:            makeHtailWaffle  0
                          makeHtailWaffle =     0.00000     0.00000
    executing [ 137] set:            makeHtailCmass  0
                          makeHtailCmass =     0.00000     0.00000
    executing [ 139] ifthen:             0.00000  EQ      0.00000  and      0.00000  eq      0.00000
    executing [ 140] set:            makeVtailOml  0
                          makeVtailOml =     0.00000     0.00000
    executing [ 141] set:            makeVtailHinge  0
                          makeVtailHinge =     0.00000     0.00000
    executing [ 142] set:            makeVtailWaffle  0
                          makeVtailWaffle =     0.00000     0.00000
    executing [ 143] set:            makeVtailCmass  0
                          makeVtailCmass =     0.00000     0.00000
    executing [ 145] ifthen:             0.00000  EQ      0.00000  and      0.00000  eq      0.00000
    executing [ 146] set:            makePylonOml  0
                          makePylonOml =     0.00000     0.00000
    executing [ 148] ifthen:             0.00000  EQ      0.00000  and      0.00000  eq      0.00000
    executing [ 149] set:            makePodOml  0
                          makePodOml =     0.00000     0.00000
    executing [ 151] ifthen:             0.00000  EQ      0.00000  and      0.00000  eq      0.00000
    executing [ 152] set:            makeWingHinge  0
                          makeWingHinge =     0.00000     0.00000
    executing [ 153] set:            makeHtailHinge  0
                          makeHtailHinge =     0.00000     0.00000
    executing [ 154] set:            makeVtailHinge  0
                          makeVtailHinge =     0.00000     0.00000
    executing [ 156] end:
    executing [ 157] set:            wing:span  sqrt(wing:aspect*wing:area)
                          wing:span =     7.74597     0.00000
    executing [ 158] set:            wing:chordr  2*wing:area/wing:span/(1+wing:taper)
                          wing:chordr =     1.61374     0.00000
    executing [ 159] set:            wing:chordt  wing:chordr*wing:taper
                          wing:chordt =     0.96825     0.00000
    executing [ 160] set:            wing:ytip  -wing:span/2
                          wing:ytip =    -3.87298     0.00000
    executing [ 161] set:            wing:xtip  -wing:ytip*tand(wing:sweep)
                          wing:xtip =     1.40965     0.00000
    executing [ 162] set:            wing:ztip  -wing:ytip*tand(wing:dihedral)
                          wing:ztip =     0.27083     0.00000
    executing [ 163] set:            wing:mac  sqrt(wing:area/wing:aspect)
                          wing:mac =     1.29099     0.00000
    executing [ 164] ifthen:             1.00000  EQ      1.00000  and      0.00000  eq      0.00000
    executing [ 165] mark:
                          Mark        created
    executing [ 166] udprim:     naca thickness     0.12000 camber     0.06000 sharpte     0.00000 (compiled code)
                          Body      1 created  (toler= 1.0000e-07, nnode=   3, nedge=   3, nface=   1)
    executing [ 167] scale:          1.61374      0.00000      0.00000      0.00000
                          Body      2 created  (toler= 1.6137e-07, nnode=   3, nedge=   3, nface=   1)
    executing [ 168] rotatex:       90.00000      0.00000      0.00000
                          Body      3 created  (toler= 1.6137e-07, nnode=   3, nedge=   3, nface=   1)
    executing [ 169] udprim:     naca thickness     0.16000 camber     0.02000 sharpte     0.00000 (compiled code)
                          Body      4 created  (toler= 1.0000e-07, nnode=   3, nedge=   3, nface=   1)
    executing [ 170] scale:          0.96825      0.00000      0.00000      0.00000
                          Body      5 created  (toler= 1.0000e-07, nnode=   3, nedge=   3, nface=   1)
    executing [ 171] rotatex:       90.00000      0.00000      0.00000
                          Body      6 created  (toler= 1.0000e-07, nnode=   3, nedge=   3, nface=   1)
    executing [ 172] rotatey:       -5.00000      0.00000      0.00000
                          Body      7 created  (toler= 1.0000e-07, nnode=   3, nedge=   3, nface=   1)
    executing [ 173] translate:      1.40965     -3.87298      0.27083
                          Body      8 created  (toler= 1.0000e-07, nnode=   3, nedge=   3, nface=   1)
    executing [ 174] rule:           0.00000      0.00000
                          ruling  2 Xsects with 3 Strips each...
                          Body      9 created  (toler= 1.0000e-07, nnode=   6, nedge=   9, nface=   5)
    executing [ 175] set:            ruledBody  @nbody
                          ruledBody =     9.00000     0.00000
    executing [ 176] select:   face  9  1
                     putting Branch Attributes on Face 4
    executing [ 177] select:   face  9  2
                     putting Branch Attributes on Face 5
    executing [ 178] select:   face  9  3
                     putting Branch Attributes on Face 1
    executing [ 179] select:   face  9  4
                     putting Branch Attributes on Face 2
    executing [ 180] select:   edge  9  3  9  4  1
                     putting Branch Attributes on Edge 3
    executing [ 181] ifthen:             0.00000  EQ      0.00000  and      0.00000  eq      0.00000
    executing [ 182] select:   face  9  5
                     putting Branch Attributes on Face 3
    executing [ 186] store:      LeftWing      0.00000      1.00000
                          Body      9 stored
    executing [ 187] restore:    LeftWing      0.00000
                          Body     10 restored (toler= 1.0000e-07, nnode=   6, nedge=   9, nface=   5)
    executing [ 188] select:   face  tagType  tip  *  *  *  *
                     putting Branch Attributes on Face 5
    executing [ 189] select:   edge  tagType  leadingEdge  *  *  *  *
    executing [ 190] ifthen:             3.00000  GT      0.00000  and      0.00000  eq      0.00000
    executing [ 191] select:   edge  tagType  leadingEdge  *  *  *  *
                     putting Branch Attributes on Edge 3
    executing [ 193] select:   edge  tagType  trailingEdge  *  *  *  *
ERROR:: (edge_not_found) in Branch Brch_000193 at [[..\ESP\wing3.csm:103]]
        SELECT specified nonexistant Edge
    executing [ 197] catbeg:         $edge_not_found
    --> catching signal -223 (edge_not_found)
    executing [ 199] mirror:         0.00000      1.00000      0.00000      0.00000
                          Body     11 created  (toler= 1.0000e-07, nnode=   6, nedge=   9, nface=   5)
    executing [ 200] join:           0.00000      0.00000
                          Body     12 created  (toler= 1.0000e-07, nnode=   9, nedge=  15, nface=   8)
    executing [ 201] select:   edge  9  3  9  3  1
                     putting Branch Attributes on Edge 2
    executing [ 202] select:   edge  9  4  9  4  1
                     putting Branch Attributes on Edge 5
    executing [ 203] store:      WingOml      0.00000      0.00000
                          Body     12 stored
    executing [ 205] ifthen:             1.00000  EQ      1.00000  and      0.00000  eq      0.00000
    executing [ 206] restore:    WingOml      0.00000
                          Body     13 restored (toler= 1.0000e-07, nnode=   9, nedge=  15, nface=   8)
    executing [ 207] set:            xmin  @xmin-0.1
                          xmin =    -0.10102     0.00000
    executing [ 208] set:            xmax  @xmax+0.1
                          xmax =     2.47425     0.00000
    executing [ 209] set:            ymin  0
                          ymin =     0.00000     0.00000
    executing [ 210] set:            ymax  @ymax+0.1
                          ymax =     3.97298     0.00000
    executing [ 211] set:            zmin  @zmin-0.1
                          zmin =    -0.13316     0.00000
    executing [ 212] set:            zmax  @zmax+0.1
                          zmax =     0.49998     0.00000
    executing [ 213] store:      .      0.00000      0.00000
                          Body     13 removed from stack
    executing [ 214] udparg:     waffle depth     3.00000 
                          Body     14 created  (NULL Body)
    executing [ 215] udparg:     waffle depth     0.20000 
                          Body     15 created  (NULL Body)
    executing [ 216] udparg:     waffle depth     0.70000 
                          Body     16 created  (NULL Body)
    executing [ 217] udprim:     waffle depth     0.63315 filename tmp_OpenCSM_00/00 (compiled code)
    processing: 
    processing:         # construction lines for spars
    processing:         CPOINT A   AT          0+wing:spar1*wing:chordr 0
    processing:         CPOINT B   AT  wing:xtip+wing:spar1*wing:chordt -wing:ytip
    processing:         CPOINT C   AT          0+wing:spar2*wing:chordr 0
    processing:         CPOINT D   AT  wing:xtip+wing:spar2*wing:chordt -wing:ytip
    processing: 
    processing:         CLINE  AB      A  B
    processing:         CLINE  CD      C  D
    processing: 
    processing:         # rite spars
    processing:         POINT  E   ON  AB   YLOC  ymin
    processing:         POINT  F   ON  AB   YLOC  ymax
    processing:         LINE   EF  E   F  tagComp=riteWing  tagType=spar  tagIndex=1
    processing: 
    processing:         POINT  G   ON  CD   YLOC  ymin
    processing:         POINT  H   ON  CD   YLOC  ymax
    processing:         LINE   GH  G   H  tagComp=riteWing  tagType=spar tagIndex=2
    processing: 
    processing:         # rite ribs
    processing:         PATBEG  irib  wing:nrib
    processing:             CPOINT  I  AT  xmin  -wing:ytip*irib/(wing:nrib+1)
    processing:             CPOINT  J  AT  xmax  y@I
    processing:             LINE    .   I  J  tagComp=riteWing  tagType=rib   tagIndex=!val2str(irib,0)
    processing:         PATEND
    processing:             CPOINT  I  AT  xmin  -wing:ytip*irib/(wing:nrib+1)
    processing:             CPOINT  J  AT  xmax  y@I
    processing:             LINE    .   I  J  tagComp=riteWing  tagType=rib   tagIndex=!val2str(irib,0)
    processing:         PATEND
    processing:             CPOINT  I  AT  xmin  -wing:ytip*irib/(wing:nrib+1)
    processing:             CPOINT  J  AT  xmax  y@I
    processing:             LINE    .   I  J  tagComp=riteWing  tagType=rib   tagIndex=!val2str(irib,0)
    processing:         PATEND
    processing: 
    processing:         # root rib
    processing:         CPOINT  I  AT  xmin  0
    processing:         CPOINT  J  AT  xmax  y@I
    processing:         LINE    .   I  J  tagComp=rootWing  tagType=rib   tagIndex=0
    processing: 
    processing:         # left spars
    processing:         POINT  E   AT  x@E  -y@E
    processing:         POINT  F   AT  x@F  -y@F
    processing:         LINE   FE  F   E  tagComp=leftWing  tagType=spar  tagIndex=1
    processing: 
    processing:         POINT  G   AT  x@G  -y@G
    processing:         POINT  H   AT  x@H  -y@H
    processing:         LINE   HG  H   G  tagComp=leftWing  tagType=spar tagIndex=2
    processing: 
    processing:         # left ribs
    processing:         PATBEG  irib  wing:nrib
    processing:             CPOINT  I  AT  xmin  wing:ytip*irib/(wing:nrib+1)
    processing:             CPOINT  J  AT  xmax  y@I
    processing:             LINE    .   I  J  tagComp=leftWing  tagType=rib   tagIndex=!val2str(irib,0)
    processing:         PATEND
    processing:             CPOINT  I  AT  xmin  wing:ytip*irib/(wing:nrib+1)
    processing:             CPOINT  J  AT  xmax  y@I
    processing:             LINE    .   I  J  tagComp=leftWing  tagType=rib   tagIndex=!val2str(irib,0)
    processing:         PATEND
    processing:             CPOINT  I  AT  xmin  wing:ytip*irib/(wing:nrib+1)
    processing:             CPOINT  J  AT  xmax  y@I
    processing:             LINE    .   I  J  tagComp=leftWing  tagType=rib   tagIndex=!val2str(irib,0)
    processing:         PATEND
                          Body     17 created  (toler= 1.0000e-07, nnode=  64, nedge= 106, nface=  37)
    executing [ 218] translate:      0.00000      0.00000     -0.13316
                          Body     18 created  (toler= 1.0000e-07, nnode=  64, nedge= 106, nface=  37)
    executing [ 219] store:      WingWaffle      0.00000      0.00000
                          Body     18 stored
    executing [ 221] udprim:     $/capsViews (scripted code)
              [ 222] interface:  .  ALL      0.00000
    executing [ 223] ifthen:             0.00000  NE      0.00000  and  ...
    executing [ 268] ifthen:             0.00000  NE      0.00000  and  ...
    executing [ 409] ifthen:             0.00000  NE      0.00000  and  ...
    executing [ 852] ifthen:             0.00000  NE      0.00000  and  ...
    executing [1290] ifthen:             1.00000  NE      0.00000  OR  ...
    executing [1291] udprim:     $/viewStructure (scripted code)
              [1292] interface:  .  ALL      0.00000
    executing [1293] set:            structAIMs  $nastranAIM;astrosAIM;mystranAIM;egadsTessAIM
                          structAIMs = $nastranAIM;astrosAIM;mystranAIM;egadsTessAIM
    executing [1294] ifthen:             1.00000  EQ      1.00000  and      0.00000  eq      0.00000
    executing [1295] restore:    WingOml      0.00000
                          Body     19 restored (toler= 1.0000e-07, nnode=   9, nedge=  15, nface=   8)
    executing [1296] restore:    WingWaffle      0.00000
                          Body     20 restored (toler= 1.0000e-07, nnode=  64, nedge= 106, nface=  37)
    executing [1297] intersect:  none      1.00000   0.0000e+00
                          Body     21 created  (toler= 5.0000e-06, nnode=  57, nedge=  99, nface=  37)
    executing [1298] restore:    WingOml      0.00000
                          Body     22 restored (toler= 1.0000e-07, nnode=   9, nedge=  15, nface=   8)
    executing [1299] restore:    WingWaffle      0.00000
                          Body     23 restored (toler= 1.0000e-07, nnode=  64, nedge= 106, nface=  37)
    executing [1300] subtract:   none      1.00000   0.0000e+00
                          Body     24 created  (toler= 6.7429e-07, nnode=  63, nedge= 123, nface=  62)
    executing [1301] extract:    0
                          Body     25 created  (toler= 6.7429e-07, nnode=  63, nedge= 123, nface=  62)
    executing [1302] union:          0.00000  0   0.0000e+00
                          Body     26 created  (toler= 5.0000e-06, nnode=  63, nedge= 137, nface=  99)
    executing [1303] ifthen:             1.00000  EQ      1.00000  and      0.00000  eq      0.00000
    executing [1304] udprim:     editAttr filename tmp_OpenCSM_00/03 (compiled code)
    processing:             FACE ADJ2EDGE tagType=leadingEdge

    processing:             SET           capsIgnore=true

    processing:     

    processing:             FACE HAS      tagType=trailingEdge

    processing:             SET           capsIgnore=true

    processing:     

    processing:             FACE ADJ2FACE tagType=trailingEdge

    processing:             ANDNOT HAS    tagType=rib

    processing:             ANDNOT HAS    tagType=tip

    processing:             SET           capsIgnore=true

    processing:     

    processing:             FACE ADJ2EDGE tagType=trailingEdge

    processing:             SET           capsIgnore=true

WARNING:: toler =   5.0000e-06 for UDPRIM
                          Body     27 created  (toler= 5.0000e-06, nnode=  63, nedge= 137, nface=  99)
    executing [1305] udprim:     editAttr filename tmp_OpenCSM_00/04 (compiled code)
    processing:             FACE HAS        tagComp=leftWing

    processing:             ANDNOT ADJ2EDGE tagType=leadingEdge

    processing:             ANDNOT ADJ2EDGE tagType=trailingEdge

    processing:             ANDNOT ADJ2FACE tagType=trailingEdge

    processing:             SET             capsGroup=leftWingSkin

    processing:     

    processing:             FACE HAS        tagComp=riteWing

    processing:             ANDNOT ADJ2EDGE tagType=leadingEdge

    processing:             ANDNOT ADJ2EDGE tagType=trailingEdge

    processing:             ANDNOT ADJ2FACE tagType=trailingEdge

    processing:             SET             capsGroup=riteWingSkin

    processing:     

    processing:             FACE HAS        tagType=rib

    processing:             SET             capsGroup=wingRib

    processing: 

    processing:             FACE HAS        tagType=tip

    processing:             SET             capsGroup=wingRib

    processing:   

    processing:             FACE HAS        tagType=spar tagIndex=1

    processing:             SET             capsGroup=wingSpar1

    processing:             SET             capsMesh=wingSpar1

    processing: 

    processing:             FACE HAS        tagType=spar tagIndex=2

    processing:             SET             capsGroup=wingSpar2

    processing:             SET             capsMesh=wingSpar2

WARNING:: toler =   5.0000e-06 for UDPRIM
                          Body     28 created  (toler= 5.0000e-06, nnode=  63, nedge= 137, nface=  99)
    executing [1309] udprim:     editAttr filename tmp_OpenCSM_00/06 (compiled code)
    processing:         FACE HAS      tagType=upper

    processing:         SET           capsBound=upperWing

    processing: 

    processing:         FACE HAS      tagType=lower

    processing:         SET           capsBound=lowerWing

    processing: 

    processing:         FACE HAS      tagType=tip tagIndex=1

    processing:         SET           capsBound=leftTip

    processing: 

    processing:         FACE HAS      tagType=tip tagIndex=2

    processing:         SET           capsBound=riteTip

WARNING:: toler =   5.0000e-06 for UDPRIM
                          Body     29 created  (toler= 5.0000e-06, nnode=  63, nedge= 137, nface=  99)
    executing [1310] udprim:     editAttr filename tmp_OpenCSM_00/07 (compiled code)
    processing:         NODE ADJ2FACE tagComp=leftWing tagType=tip

    processing:         AND  ADJ2FACE tagType=lower

    processing:         AND  ADJ2FACE tagType=spar tagIndex=1

    processing:         SET           capsLoad=leftPointLoad

    processing: 

    processing:         NODE ADJ2FACE tagComp=riteWing tagType=tip

    processing:         AND  ADJ2FACE tagType=lower

    processing:         AND  ADJ2FACE tagType=spar tagIndex=1

    processing:         SET           capsLoad=ritePointLoad

WARNING:: toler =   5.0000e-06 for UDPRIM
                          Body     30 created  (toler= 5.0000e-06, nnode=  63, nedge= 137, nface=  99)
    executing [1311] select:   edge  tagType  leadingEdge  *  *  *  *
    executing [1312] dimension:     leadingEdges      1.00000      8.00000
    executing [1313] set:            leadingEdges  @sellist
                          leadingEdges[1,1] =     8.00000     0.00000
                          leadingEdges[1,2] =    31.00000     0.00000
                          leadingEdges[1,3] =    33.00000     0.00000
                          leadingEdges[1,4] =    62.00000     0.00000
                          leadingEdges[1,5] =    64.00000     0.00000
                          leadingEdges[1,6] =    94.00000     0.00000
                          leadingEdges[1,7] =    96.00000     0.00000
                          leadingEdges[1,8] =   121.00000     0.00000
    executing [1314] patbeg:         i      8.00000
                          pattern counter: i =   1
    executing [1315] select:   edge  8
                     putting Branch Attributes on Edge 8
    executing [1316] patend:
                          pattern counter: i =   2
    executing [1315] select:   edge  31
                     putting Branch Attributes on Edge 31
    executing [1316] patend:
                          pattern counter: i =   3
    executing [1315] select:   edge  33
                     putting Branch Attributes on Edge 33
    executing [1316] patend:
                          pattern counter: i =   4
    executing [1315] select:   edge  62
                     putting Branch Attributes on Edge 62
    executing [1316] patend:
                          pattern counter: i =   5
    executing [1315] select:   edge  64
                     putting Branch Attributes on Edge 64
    executing [1316] patend:
                          pattern counter: i =   6
    executing [1315] select:   edge  94
                     putting Branch Attributes on Edge 94
    executing [1316] patend:
                          pattern counter: i =   7
    executing [1315] select:   edge  96
                     putting Branch Attributes on Edge 96
    executing [1316] patend:
                          pattern counter: i =   8
    executing [1315] select:   edge  121
                     putting Branch Attributes on Edge 121
    executing [1316] patend:
    executing [1317] udprim:     editAttr filename tmp_OpenCSM_00/08 (compiled code)
    processing:         FACE ADJ2EDGE tagComp=leftWing

    processing:         SET           tagTemp=leadingEdgeFace

WARNING:: toler =   5.0000e-06 for UDPRIM
                          Body     31 created  (toler= 5.0000e-06, nnode=  63, nedge= 137, nface=  99)
    executing [1318] udprim:     editAttr filename tmp_OpenCSM_00/09 (compiled code)
    processing:         EDGE ADJ2FACE tagTemp=leadingEdgeFace

    processing:         AND  ADJ2FACE tagComp=rootWing

    processing:         SET           capsMesh=rootLeadingEdge

WARNING:: toler =   5.0000e-06 for UDPRIM
                          Body     32 created  (toler= 5.0000e-06, nnode=  63, nedge= 137, nface=  99)
    executing [1319] ifthen:             1.00000  EQ      1.00000  and      0.00000  eq      0.00000
    executing [1320] udprim:     editAttr filename tmp_OpenCSM_00/10 (compiled code)
    processing:             FACE HAS      tagComp=rootWing

    processing:             SET           capsConstraint=rootConstraint

    processing:        

    processing:             EDGE ADJ2FACE tagComp=rootWing

    processing:             SET  capsConstraint=rootConstraint

    processing:     

    processing:             NODE ADJ2FACE tagComp=rootWing

    processing:             SET  capsConstraint=rootConstraint

WARNING:: toler =   5.0000e-06 for UDPRIM
                          Body     33 created  (toler= 5.0000e-06, nnode=  63, nedge= 137, nface=  99)
    executing [1322] ifthen:             0.00000  EQ      1.00000  and  ...
    executing [1325] udprim:     editAttr filename tmp_OpenCSM_00/12 (compiled code)
    processing:         FACE HAS      tagComp=leftWing tagType=upper

    processing:         AND  ADJ2EDGE tagType=leadingEdge

    processing:         AND  ADJ2FACE tagComp=riteWing

    processing:         SET           tagCsys=leftWing

    processing: 

    processing:         FACE HAS      tagComp=riteWing tagType=upper

    processing:         AND  ADJ2EDGE tagType=leadingEdge

    processing:         AND  ADJ2FACE tagComp=leftWing

    processing:         SET           tagCsys=riteWing

WARNING:: toler =   5.0000e-06 for UDPRIM
                          Body     34 created  (toler= 5.0000e-06, nnode=  63, nedge= 137, nface=  99)
    executing [1326] select:   face  tagCsys  leftWing  *  *  *  *
    executing [1327] set:            leftWingSkinCsys  @sellist
                          leftWingSkinCsys =    27.00000     0.00000
    executing [1328] select:   face  tagCsys  riteWing  *  *  *  *
    executing [1329] set:            riteWingSkinCsys  @sellist
                          riteWingSkinCsys =     8.00000     0.00000
    executing [1330] store:      WingStruct      0.00000      0.00000
                          Body     34 stored
    executing [1331] restore:    WingStruct      0.00000
                          Body     35 restored (toler= 5.0000e-06, nnode=  63, nedge= 137, nface=  99)
    executing [1332] store:      WingStruct      0.00000      0.00000
WARNING:: storage WingStruct (0) is being overwritten
                          Body     35 stored
    executing [1334] restore:    WingStruct      0.00000
                          Body     36 restored (toler= 5.0000e-06, nnode=  63, nedge= 137, nface=  99)
    executing [1335] select:   body
                    putting Branch Attributes on Body
    executing [1336] ifthen:             0.00000  EQ      1.00000  and  ...
    executing [1339] end:
    executing [1341] ifthen:             0.00000  NE      0.00000  and  ...
    executing [1378] end:
    finalizing:
==> Profile information
    Branch type           ncall  time (sec)    pct
    dimension                 1       0.000    0.0
    udprim                   14       1.527   11.2
    restore                   8       0.155    1.1
    rule                      1       0.121    0.9
    intersect                 1       1.059    7.8
    subtract                  1       2.613   19.2
    union                     1       6.256   46.0
    join                      1       0.133    1.0
    extract                   1       1.304    9.6
    translate                 2       0.025    0.2
    rotatex                   2       0.006    0.0
    rotatey                   1       0.003    0.0
    scale                     2       0.006    0.0
    mirror                    1       0.040    0.3
    interface                 3       0.002    0.0
    end                       3       0.000    0.0
    set                      60       0.136    1.0
    udparg                    3       0.002    0.0
    select                   23       0.148    1.1
    store                     6       0.005    0.0
    patbeg                    1       0.001    0.0
    patend                    8       0.003    0.0
    ifthen                   43       0.065    0.5
    else                      2       0.000    0.0
    endif                    43       0.000    0.0
    catbeg                    1       0.000    0.0
    catend                    1       0.000    0.0
    mark                      1       0.000    0.0
    Total                   235      13.610
Mapping capsGroup attributes ................
	Number of unique capsGroup attributes = 5
	Name = wingSpar1, index = 1
	Name = riteWingSkin, index = 2
	Name = wingRib, index = 3
	Name = leftWingSkin, index = 4
	Name = wingSpar2, index = 5
Mapping capsMesh attributes ................
	Number of unique capsMesh attributes = 4
	Name = wingSpar1, index = 1
	Name = wingSpar2, index = 2
	Name = leadingEdge, index = 3
	Name = rootLeadingEdge, index = 4
Getting surface mesh for body 1 (of 1)
	Tessellating body
	capsIgnore attribute found for face - 3!!
	capsIgnore attribute found for face - 8!!
	capsIgnore attribute found for face - 15!!
	capsIgnore attribute found for face - 16!!
	capsIgnore attribute found for face - 17!!
	capsIgnore attribute found for face - 18!!
	capsIgnore attribute found for face - 26!!
	capsIgnore attribute found for face - 27!!
	capsIgnore attribute found for face - 33!!
	capsIgnore attribute found for face - 36!!
	capsIgnore attribute found for face - 37!!
	capsIgnore attribute found for face - 38!!
	capsIgnore attribute found for face - 39!!
	capsIgnore attribute found for face - 40!!
	capsIgnore attribute found for face - 41!!
	capsIgnore attribute found for face - 42!!
	capsIgnore attribute found for face - 50!!
	capsIgnore attribute found for face - 51!!
	capsIgnore attribute found for face - 52!!
	capsIgnore attribute found for face - 58!!
	capsIgnore attribute found for face - 61!!
	capsIgnore attribute found for face - 62!!
	capsIgnore attribute found for face - 63!!
	capsIgnore attribute found for face - 64!!
	capsIgnore attribute found for face - 65!!
	capsIgnore attribute found for face - 66!!
	capsIgnore attribute found for face - 73!!
	capsIgnore attribute found for face - 74!!
	capsIgnore attribute found for face - 75!!
	capsIgnore attribute found for face - 81!!
	capsIgnore attribute found for face - 83!!
	capsIgnore attribute found for face - 84!!
	capsIgnore attribute found for face - 85!!
	capsIgnore attribute found for face - 86!!
	capsIgnore attribute found for face - 89!!
	capsIgnore attribute found for face - 90!!
	capsIgnore attribute found for face - 91!!
	capsIgnore attribute found for face - 96!!
	capsIgnore attribute found for face - 97!!
	capsIgnore attribute found for face - 98!!
Number of nodes = 299
Number of elements = 387
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 0
Number of quadrilateral elements = 387
----------------------------
Total number of nodes = 299
Total number of elements = 387
Analysis directory does not currently exist - it will be made automatically
 CAPS Info: No symbol for aimExecute in astrosAIM
 CAPS Info: No symbol for aimCheck in astrosAIM
 CAPS Info: No symbol for aimData in astrosAIM
 CAPS Info: No symbol for aimSensitivity in astrosAIM

==> Running ASTROS pre-analysis...
Mapping Csys attributes ................
	Number of unique Csys attributes = 2
	Name = leftWingSkin, index = 1
	Name = riteWingSkin, index = 2

Getting FEA coordinate systems.......
	Number of coordinate systems - 2
	Coordinate system name - leftWingSkin
	Coordinate system name - riteWingSkin
Mapping capsConstraint attributes ................
	Number of unique capsConstraint attributes = 1
	Name = rootConstraint, index = 1
Mapping capsLoad attributes ................
	Number of unique capsLoad attributes = 2
	Name = ritePointLoad, index = 1
	Name = leftPointLoad, index = 2
Mapping capsBound attributes ................
	Number of unique capsBound attributes = 4
	Name = lowerWing, index = 1
	Name = upperWing, index = 2
	Name = riteTip, index = 3
	Name = leftTip, index = 4
Mapping capsConnect attributes ................
	Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
	Number of unique capsResponse attributes = 0
Found link for attrMap (Attribute_Map) from parent
Found link for a Surface mesh from parent
capsIgnore attribute found. Removing unneeded nodes and elements from mesh!
Removing unused nodes...
	Removed 64 (out of 299) unused nodes!
Setting FEA Data
	Mesh for body = 0
	Number of nodal coordinates = 235
	Number of elements = 227
	Elemental Nodes = 0
	Elemental Rods  = 0
	Elemental Tria3 = 0
	Elemental Quad4 = 227

Getting FEA materials.......
	Number of materials - 2
	Material name - Unobtainium
	No "materialType" specified for Material tuple Unobtainium, defaulting to "Isotropic"
	Material name - Madeupium
	Done getting FEA materials

Getting FEA properties.......
	Number of properties - 5
	Property name - leftWingSkin
	Property name - riteWingSkin
	Property name - wingRib
	Property name - wingSpar1
	Property name - wingSpar2
	Done getting FEA properties
Updating mesh element types based on properties input

Getting FEA constraints.......
	Number of constraints - 1
	Constraint name - rootConstraint
	No "constraintType" specified for Constraint tuple rootConstraint, defaulting to "ZeroDisplacement"
	Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults

Getting FEA loads.......
	Number of loads - 2
	Load name - leftPointLoad
	No "groupName" specified for Load tuple leftPointLoad, going to use load name
	Load name - ritePointLoad
	No "groupName" specified for Load tuple ritePointLoad, going to use load name
	Done getting FEA loads
Design_Variable tuple is NULL - No design variables applied
Design_Constraint tuple is NULL - No design constraints applied
Analysis tuple is NULL

Getting FEA analyses.......
	Number of analyses - 1
	Analysis name - Default
	Done getting FEA analyses

Writing Astros grid and connectivity file (in large field format) ....
Finished writing Astros grid file

Writing subElement types (if any) - appending mesh file

Writing Astros instruction file....
	Writing analysis cards
	Writing load ADD cards
	Writing constraint cards--each subcase individually
	Writing load cards
	Writing material cards
	Writing property cards
	Writing coordinate system cards

==> Running Astros...
Note: The following floating-point exceptions are signalling: IEEE_UNDERFLOW_FLAG IEEE_DENORMAL

--> Maximum displacements:
--> Tmax 43461.879162311016
--> T1max 738.595
--> T2max 3686.25
--> T3max 43363.8
--> temporary directory "tmp_OpenCSM_00" removed
 Cleaning up egadsInstance - 0
 Cleaning up astrosInstance - 0
 EGADS Info: 861 Objects, 1379 Reference in Use (of 34591) at Close!

real	0m16.784s
user	0m0.061s
sys	0m0.342s
+ status=0
+ set +x

=================================================
data/session10/astros_3_StaticClamped.py passed (as expected)
=================================================


=================================================
astros_4_Composite.py test;
+ python astros_4_Composite.py
+ tee -a /c/Users/jenkins/workspace/ESP_QuickTestCaps/7.4/CAPS/training/WIN64.2017/CAPS/training/training.log

==> Loading geometry from file "..\ESP\wing3.csm"...
Definition of "kt" in "\Users\jenkins\workspace\ESP_QuickTestCaps\7.4\CAPS\training\WIN64.2017\ESP\udunits\/udunits2-common.xml", line 90, overrides prefixed-unit "1000000 kilogram"
Definition of "microns" in "\Users\jenkins\workspace\ESP_QuickTestCaps\7.4\CAPS\training\WIN64.2017\ESP\udunits\/udunits2-common.xml", line 336, overrides prefixed-unit "1e-15 second"
Definition of "ft" in "\Users\jenkins\workspace\ESP_QuickTestCaps\7.4\CAPS\training\WIN64.2017\ESP\udunits\/udunits2-common.xml", line 433, overrides prefixed-unit "1e-12 kilogram"
Definition of "yd" in "\Users\jenkins\workspace\ESP_QuickTestCaps\7.4\CAPS\training\WIN64.2017\ESP\udunits\/udunits2-common.xml", line 441, overrides prefixed-unit "8.64e-20 second"
Definition of "pt" in "\Users\jenkins\workspace\ESP_QuickTestCaps\7.4\CAPS\training\WIN64.2017\ESP\udunits\/udunits2-common.xml", line 655, overrides prefixed-unit "1e-09 kilogram"
Definition of "at" in "\Users\jenkins\workspace\ESP_QuickTestCaps\7.4\CAPS\training\WIN64.2017\ESP\udunits\/udunits2-common.xml", line 1052, overrides prefixed-unit "1e-15 kilogram"
Definition of "ph" in "\Users\jenkins\workspace\ESP_QuickTestCaps\7.4\CAPS\training\WIN64.2017\ESP\udunits\/udunits2-common.xml", line 1571, overrides prefixed-unit "3.6e-09 second"
Definition of "nt" in "\Users\jenkins\workspace\ESP_QuickTestCaps\7.4\CAPS\training\WIN64.2017\ESP\udunits\/udunits2-common.xml", line 1578, overrides prefixed-unit "1e-06 kilogram"
--> enter ocsmCheck()
--> checks passed
--> enter ocsmSave(filename=capsTmp.cpc)
--> enter ocsmCheck()
--> checks passed
 CAPS Info: No symbol for aimDiscr in egadsTessAIM
 CAPS Info: No symbol for aimFreeDiscr in egadsTessAIM
 CAPS Info: No symbol for aimLocateElement in egadsTessAIM
 CAPS Info: No symbol for aimUsesDataSet in egadsTessAIM
 CAPS Info: No symbol for aimCheck in egadsTessAIM
 CAPS Info: No symbol for aimTransfer in egadsTessAIM
 CAPS Info: No symbol for aimInterpolation in egadsTessAIM
 CAPS Info: No symbol for aimInterpolateBar in egadsTessAIM
 CAPS Info: No symbol for aimIntegration in egadsTessAIM
 CAPS Info: No symbol for aimIntegrateBar in egadsTessAIM
 CAPS Info: No symbol for aimSensitivity in egadsTessAIM

==> Generating Mesh...
--> enter ocsmBuild(buildTo=0)
--> enter ocsmCheck()
--> checks passed

    Interim EGADS version  1.19 (with  OpenCASCADE 7.4.1)

    executing [   1] udprim:     $/capsHeader (scripted code)
              [   2] interface:  .  ALL      0.00000
    executing [   3] set:            makeFuseOml  0
                          makeFuseOml =     0.00000     0.00000
    executing [   4] set:            makeFuseWaffle  0
                          makeFuseWaffle =     0.00000     0.00000
    executing [   5] set:            makeFuseCmass  0
                          makeFuseCmass =     0.00000     0.00000
    executing [   6] set:            makeWingOml  0
                          makeWingOml =     0.00000     0.00000
    executing [   7] set:            makeWingHinge  0
                          makeWingHinge =     0.00000     0.00000
    executing [   8] set:            makeWingWaffle  0
                          makeWingWaffle =     0.00000     0.00000
    executing [   9] set:            makeWingCmass  0
                          makeWingCmass =     0.00000     0.00000
    executing [  10] set:            makeHtailOml  0
                          makeHtailOml =     0.00000     0.00000
    executing [  11] set:            makeHtailHinge  0
                          makeHtailHinge =     0.00000     0.00000
    executing [  12] set:            makeHtailWaffle  0
                          makeHtailWaffle =     0.00000     0.00000
    executing [  13] set:            makeHtailCmass  0
                          makeHtailCmass =     0.00000     0.00000
    executing [  14] set:            makeVtailOml  0
                          makeVtailOml =     0.00000     0.00000
    executing [  15] set:            makeVtailHinge  0
                          makeVtailHinge =     0.00000     0.00000
    executing [  16] set:            makeVtailWaffle  0
                          makeVtailWaffle =     0.00000     0.00000
    executing [  17] set:            makeVtailCmass  0
                          makeVtailCmass =     0.00000     0.00000
    executing [  18] set:            makePylonOml  0
                          makePylonOml =     0.00000     0.00000
    executing [  19] set:            makePodOml  0
                          makePodOml =     0.00000     0.00000
    executing [  20] set:            SHARP_TE  0
                          SHARP_TE =     0.00000     0.00000
    executing [  21] ifthen:             0.00000  EQ      1.00000  and  ...
    executing [  24] ifthen:             0.00000  NE      0.00000  and  ...
    executing [  40] ifthen:             0.00000  EQ      1.00000  and  ...
    executing [  43] ifthen:             0.00000  NE      0.00000  and  ...
    executing [  51] ifthen:             0.00000  EQ      1.00000  and  ...
    executing [  54] ifthen:             0.00000  NE      0.00000  and  ...
    executing [  65] ifthen:             0.00000  EQ      1.00000  and  ...
    executing [  68] ifthen:             0.00000  NE      0.00000  and  ...
    executing [  79] ifthen:             0.00000  EQ      1.00000  and  ...
    executing [  82] ifthen:             0.00000  EQ      1.00000  and  ...
    executing [  85] ifthen:             0.00000  EQ      1.00000  and  ...
    executing [  88] ifthen:             1.00000  NE      0.00000  OR  ...
    executing [  89] set:            makeWingOml  1
                          makeWingOml =     1.00000     0.00000
    executing [  90] set:            makeWingWaffle  1
                          makeWingWaffle =     1.00000     0.00000
    executing [  92] ifthen:             0.00000  EQ      1.00000  and  ...
    executing [  95] ifthen:             0.00000  NE      0.00000  and  ...
    executing [ 101] ifthen:             1.00000  EQ      1.00000  and      0.00000  eq      0.00000
    executing [ 102] set:            COMP:Fuse  0
                          COMP:Fuse =     0.00000     0.00000
    executing [ 104] ifthen:             0.00000  EQ      1.00000  and  ...
    executing [ 107] ifthen:             1.00000  EQ      1.00000  and      0.00000  eq      0.00000
    executing [ 108] set:            COMP:Htail  0
                          COMP:Htail =     0.00000     0.00000
    executing [ 110] ifthen:             1.00000  EQ      1.00000  and      0.00000  eq      0.00000
    executing [ 111] set:            COMP:Vtail  0
                          COMP:Vtail =     0.00000     0.00000
    executing [ 113] ifthen:             1.00000  EQ      1.00000  and      0.00000  eq      0.00000
    executing [ 114] set:            COMP:Pylon  0
                          COMP:Pylon =     0.00000     0.00000
    executing [ 116] ifthen:             1.00000  EQ      1.00000  and      0.00000  eq      0.00000
    executing [ 117] set:            COMP:Pod  0
                          COMP:Pod =     0.00000     0.00000
    executing [ 119] ifthen:             1.00000  EQ      1.00000  and      0.00000  eq      0.00000
    executing [ 120] set:            COMP:Control  0
                          COMP:Control =     0.00000     0.00000
    executing [ 122] ifthen:             0.00000  EQ      0.00000  and      0.00000  eq      0.00000
    executing [ 123] set:            makeFuseOml  0
                          makeFuseOml =     0.00000     0.00000
    executing [ 124] set:            makeFuseWaffle  0
                          makeFuseWaffle =     0.00000     0.00000
    executing [ 125] set:            makeFuseCmass  0
                          makeFuseCmass =     0.00000     0.00000
    executing [ 127] ifthen:             1.00000  EQ      0.00000  and  ...
    executing [ 133] ifthen:             0.00000  EQ      0.00000  and      0.00000  eq      0.00000
    executing [ 134] set:            makeHtailOml  0
                          makeHtailOml =     0.00000     0.00000
    executing [ 135] set:            makeHtailHinge  0
                          makeHtailHinge =     0.00000     0.00000
    executing [ 136] set:            makeHtailWaffle  0
                          makeHtailWaffle =     0.00000     0.00000
    executing [ 137] set:            makeHtailCmass  0
                          makeHtailCmass =     0.00000     0.00000
    executing [ 139] ifthen:             0.00000  EQ      0.00000  and      0.00000  eq      0.00000
    executing [ 140] set:            makeVtailOml  0
                          makeVtailOml =     0.00000     0.00000
    executing [ 141] set:            makeVtailHinge  0
                          makeVtailHinge =     0.00000     0.00000
    executing [ 142] set:            makeVtailWaffle  0
                          makeVtailWaffle =     0.00000     0.00000
    executing [ 143] set:            makeVtailCmass  0
                          makeVtailCmass =     0.00000     0.00000
    executing [ 145] ifthen:             0.00000  EQ      0.00000  and      0.00000  eq      0.00000
    executing [ 146] set:            makePylonOml  0
                          makePylonOml =     0.00000     0.00000
    executing [ 148] ifthen:             0.00000  EQ      0.00000  and      0.00000  eq      0.00000
    executing [ 149] set:            makePodOml  0
                          makePodOml =     0.00000     0.00000
    executing [ 151] ifthen:             0.00000  EQ      0.00000  and      0.00000  eq      0.00000
    executing [ 152] set:            makeWingHinge  0
                          makeWingHinge =     0.00000     0.00000
    executing [ 153] set:            makeHtailHinge  0
                          makeHtailHinge =     0.00000     0.00000
    executing [ 154] set:            makeVtailHinge  0
                          makeVtailHinge =     0.00000     0.00000
    executing [ 156] end:
    executing [ 157] set:            wing:span  sqrt(wing:aspect*wing:area)
                          wing:span =     7.74597     0.00000
    executing [ 158] set:            wing:chordr  2*wing:area/wing:span/(1+wing:taper)
                          wing:chordr =     1.61374     0.00000
    executing [ 159] set:            wing:chordt  wing:chordr*wing:taper
                          wing:chordt =     0.96825     0.00000
    executing [ 160] set:            wing:ytip  -wing:span/2
                          wing:ytip =    -3.87298     0.00000
    executing [ 161] set:            wing:xtip  -wing:ytip*tand(wing:sweep)
                          wing:xtip =     1.40965     0.00000
    executing [ 162] set:            wing:ztip  -wing:ytip*tand(wing:dihedral)
                          wing:ztip =     0.27083     0.00000
    executing [ 163] set:            wing:mac  sqrt(wing:area/wing:aspect)
                          wing:mac =     1.29099     0.00000
    executing [ 164] ifthen:             1.00000  EQ      1.00000  and      0.00000  eq      0.00000
    executing [ 165] mark:
                          Mark        created
    executing [ 166] udprim:     naca thickness     0.12000 camber     0.06000 sharpte     0.00000 (compiled code)
                          Body      1 created  (toler= 1.0000e-07, nnode=   3, nedge=   3, nface=   1)
    executing [ 167] scale:          1.61374      0.00000      0.00000      0.00000
                          Body      2 created  (toler= 1.6137e-07, nnode=   3, nedge=   3, nface=   1)
    executing [ 168] rotatex:       90.00000      0.00000      0.00000
                          Body      3 created  (toler= 1.6137e-07, nnode=   3, nedge=   3, nface=   1)
    executing [ 169] udprim:     naca thickness     0.16000 camber     0.02000 sharpte     0.00000 (compiled code)
                          Body      4 created  (toler= 1.0000e-07, nnode=   3, nedge=   3, nface=   1)
    executing [ 170] scale:          0.96825      0.00000      0.00000      0.00000
                          Body      5 created  (toler= 1.0000e-07, nnode=   3, nedge=   3, nface=   1)
    executing [ 171] rotatex:       90.00000      0.00000      0.00000
                          Body      6 created  (toler= 1.0000e-07, nnode=   3, nedge=   3, nface=   1)
    executing [ 172] rotatey:       -5.00000      0.00000      0.00000
                          Body      7 created  (toler= 1.0000e-07, nnode=   3, nedge=   3, nface=   1)
    executing [ 173] translate:      1.40965     -3.87298      0.27083
                          Body      8 created  (toler= 1.0000e-07, nnode=   3, nedge=   3, nface=   1)
    executing [ 174] rule:           0.00000      0.00000
                          ruling  2 Xsects with 3 Strips each...
                          Body      9 created  (toler= 1.0000e-07, nnode=   6, nedge=   9, nface=   5)
    executing [ 175] set:            ruledBody  @nbody
                          ruledBody =     9.00000     0.00000
    executing [ 176] select:   face  9  1
                     putting Branch Attributes on Face 4
    executing [ 177] select:   face  9  2
                     putting Branch Attributes on Face 5
    executing [ 178] select:   face  9  3
                     putting Branch Attributes on Face 1
    executing [ 179] select:   face  9  4
                     putting Branch Attributes on Face 2
    executing [ 180] select:   edge  9  3  9  4  1
                     putting Branch Attributes on Edge 3
    executing [ 181] ifthen:             0.00000  EQ      0.00000  and      0.00000  eq      0.00000
    executing [ 182] select:   face  9  5
                     putting Branch Attributes on Face 3
    executing [ 186] store:      LeftWing      0.00000      1.00000
                          Body      9 stored
    executing [ 187] restore:    LeftWing      0.00000
                          Body     10 restored (toler= 1.0000e-07, nnode=   6, nedge=   9, nface=   5)
    executing [ 188] select:   face  tagType  tip  *  *  *  *
                     putting Branch Attributes on Face 5
    executing [ 189] select:   edge  tagType  leadingEdge  *  *  *  *
    executing [ 190] ifthen:             3.00000  GT      0.00000  and      0.00000  eq      0.00000
    executing [ 191] select:   edge  tagType  leadingEdge  *  *  *  *
                     putting Branch Attributes on Edge 3
    executing [ 193] select:   edge  tagType  trailingEdge  *  *  *  *
ERROR:: (edge_not_found) in Branch Brch_000193 at [[..\ESP\wing3.csm:103]]
        SELECT specified nonexistant Edge
    executing [ 197] catbeg:         $edge_not_found
    --> catching signal -223 (edge_not_found)
    executing [ 199] mirror:         0.00000      1.00000      0.00000      0.00000
                          Body     11 created  (toler= 1.0000e-07, nnode=   6, nedge=   9, nface=   5)
    executing [ 200] join:           0.00000      0.00000
                          Body     12 created  (toler= 1.0000e-07, nnode=   9, nedge=  15, nface=   8)
    executing [ 201] select:   edge  9  3  9  3  1
                     putting Branch Attributes on Edge 2
    executing [ 202] select:   edge  9  4  9  4  1
                     putting Branch Attributes on Edge 5
    executing [ 203] store:      WingOml      0.00000      0.00000
                          Body     12 stored
    executing [ 205] ifthen:             1.00000  EQ      1.00000  and      0.00000  eq      0.00000
    executing [ 206] restore:    WingOml      0.00000
                          Body     13 restored (toler= 1.0000e-07, nnode=   9, nedge=  15, nface=   8)
    executing [ 207] set:            xmin  @xmin-0.1
                          xmin =    -0.10102     0.00000
    executing [ 208] set:            xmax  @xmax+0.1
                          xmax =     2.47425     0.00000
    executing [ 209] set:            ymin  0
                          ymin =     0.00000     0.00000
    executing [ 210] set:            ymax  @ymax+0.1
                          ymax =     3.97298     0.00000
    executing [ 211] set:            zmin  @zmin-0.1
                          zmin =    -0.13316     0.00000
    executing [ 212] set:            zmax  @zmax+0.1
                          zmax =     0.49998     0.00000
    executing [ 213] store:      .      0.00000      0.00000
                          Body     13 removed from stack
    executing [ 214] udparg:     waffle depth     3.00000 
                          Body     14 created  (NULL Body)
    executing [ 215] udparg:     waffle depth     0.20000 
                          Body     15 created  (NULL Body)
    executing [ 216] udparg:     waffle depth     0.70000 
                          Body     16 created  (NULL Body)
    executing [ 217] udprim:     waffle depth     0.63315 filename tmp_OpenCSM_00/00 (compiled code)
    processing: 
    processing:         # construction lines for spars
    processing:         CPOINT A   AT          0+wing:spar1*wing:chordr 0
    processing:         CPOINT B   AT  wing:xtip+wing:spar1*wing:chordt -wing:ytip
    processing:         CPOINT C   AT          0+wing:spar2*wing:chordr 0
    processing:         CPOINT D   AT  wing:xtip+wing:spar2*wing:chordt -wing:ytip
    processing: 
    processing:         CLINE  AB      A  B
    processing:         CLINE  CD      C  D
    processing: 
    processing:         # rite spars
    processing:         POINT  E   ON  AB   YLOC  ymin
    processing:         POINT  F   ON  AB   YLOC  ymax
    processing:         LINE   EF  E   F  tagComp=riteWing  tagType=spar  tagIndex=1
    processing: 
    processing:         POINT  G   ON  CD   YLOC  ymin
    processing:         POINT  H   ON  CD   YLOC  ymax
    processing:         LINE   GH  G   H  tagComp=riteWing  tagType=spar tagIndex=2
    processing: 
    processing:         # rite ribs
    processing:         PATBEG  irib  wing:nrib
    processing:             CPOINT  I  AT  xmin  -wing:ytip*irib/(wing:nrib+1)
    processing:             CPOINT  J  AT  xmax  y@I
    processing:             LINE    .   I  J  tagComp=riteWing  tagType=rib   tagIndex=!val2str(irib,0)
    processing:         PATEND
    processing:             CPOINT  I  AT  xmin  -wing:ytip*irib/(wing:nrib+1)
    processing:             CPOINT  J  AT  xmax  y@I
    processing:             LINE    .   I  J  tagComp=riteWing  tagType=rib   tagIndex=!val2str(irib,0)
    processing:         PATEND
    processing:             CPOINT  I  AT  xmin  -wing:ytip*irib/(wing:nrib+1)
    processing:             CPOINT  J  AT  xmax  y@I
    processing:             LINE    .   I  J  tagComp=riteWing  tagType=rib   tagIndex=!val2str(irib,0)
    processing:         PATEND
    processing: 
    processing:         # root rib
    processing:         CPOINT  I  AT  xmin  0
    processing:         CPOINT  J  AT  xmax  y@I
    processing:         LINE    .   I  J  tagComp=rootWing  tagType=rib   tagIndex=0
    processing: 
    processing:         # left spars
    processing:         POINT  E   AT  x@E  -y@E
    processing:         POINT  F   AT  x@F  -y@F
    processing:         LINE   FE  F   E  tagComp=leftWing  tagType=spar  tagIndex=1
    processing: 
    processing:         POINT  G   AT  x@G  -y@G
    processing:         POINT  H   AT  x@H  -y@H
    processing:         LINE   HG  H   G  tagComp=leftWing  tagType=spar tagIndex=2
    processing: 
    processing:         # left ribs
    processing:         PATBEG  irib  wing:nrib
    processing:             CPOINT  I  AT  xmin  wing:ytip*irib/(wing:nrib+1)
    processing:             CPOINT  J  AT  xmax  y@I
    processing:             LINE    .   I  J  tagComp=leftWing  tagType=rib   tagIndex=!val2str(irib,0)
    processing:         PATEND
    processing:             CPOINT  I  AT  xmin  wing:ytip*irib/(wing:nrib+1)
    processing:             CPOINT  J  AT  xmax  y@I
    processing:             LINE    .   I  J  tagComp=leftWing  tagType=rib   tagIndex=!val2str(irib,0)
    processing:         PATEND
    processing:             CPOINT  I  AT  xmin  wing:ytip*irib/(wing:nrib+1)
    processing:             CPOINT  J  AT  xmax  y@I
    processing:             LINE    .   I  J  tagComp=leftWing  tagType=rib   tagIndex=!val2str(irib,0)
    processing:         PATEND
                          Body     17 created  (toler= 1.0000e-07, nnode=  64, nedge= 106, nface=  37)
    executing [ 218] translate:      0.00000      0.00000     -0.13316
                          Body     18 created  (toler= 1.0000e-07, nnode=  64, nedge= 106, nface=  37)
    executing [ 219] store:      WingWaffle      0.00000      0.00000
                          Body     18 stored
    executing [ 221] udprim:     $/capsViews (scripted code)
              [ 222] interface:  .  ALL      0.00000
    executing [ 223] ifthen:             0.00000  NE      0.00000  and  ...
    executing [ 268] ifthen:             0.00000  NE      0.00000  and  ...
    executing [ 409] ifthen:             0.00000  NE      0.00000  and  ...
    executing [ 852] ifthen:             0.00000  NE      0.00000  and  ...
    executing [1290] ifthen:             1.00000  NE      0.00000  OR  ...
    executing [1291] udprim:     $/viewStructure (scripted code)
              [1292] interface:  .  ALL      0.00000
    executing [1293] set:            structAIMs  $nastranAIM;astrosAIM;mystranAIM;egadsTessAIM
                          structAIMs = $nastranAIM;astrosAIM;mystranAIM;egadsTessAIM
    executing [1294] ifthen:             1.00000  EQ      1.00000  and      0.00000  eq      0.00000
    executing [1295] restore:    WingOml      0.00000
                          Body     19 restored (toler= 1.0000e-07, nnode=   9, nedge=  15, nface=   8)
    executing [1296] restore:    WingWaffle      0.00000
                          Body     20 restored (toler= 1.0000e-07, nnode=  64, nedge= 106, nface=  37)
    executing [1297] intersect:  none      1.00000   0.0000e+00
                          Body     21 created  (toler= 5.0000e-06, nnode=  57, nedge=  99, nface=  37)
    executing [1298] restore:    WingOml      0.00000
                          Body     22 restored (toler= 1.0000e-07, nnode=   9, nedge=  15, nface=   8)
    executing [1299] restore:    WingWaffle      0.00000
                          Body     23 restored (toler= 1.0000e-07, nnode=  64, nedge= 106, nface=  37)
    executing [1300] subtract:   none      1.00000   0.0000e+00
                          Body     24 created  (toler= 6.7429e-07, nnode=  63, nedge= 123, nface=  62)
    executing [1301] extract:    0
                          Body     25 created  (toler= 6.7429e-07, nnode=  63, nedge= 123, nface=  62)
    executing [1302] union:          0.00000  0   0.0000e+00
                          Body     26 created  (toler= 5.0000e-06, nnode=  63, nedge= 137, nface=  99)
    executing [1303] ifthen:             1.00000  EQ      1.00000  and      0.00000  eq      0.00000
    executing [1304] udprim:     editAttr filename tmp_OpenCSM_00/03 (compiled code)
    processing:             FACE ADJ2EDGE tagType=leadingEdge

    processing:             SET           capsIgnore=true

    processing:     

    processing:             FACE HAS      tagType=trailingEdge

    processing:             SET           capsIgnore=true

    processing:     

    processing:             FACE ADJ2FACE tagType=trailingEdge

    processing:             ANDNOT HAS    tagType=rib

    processing:             ANDNOT HAS    tagType=tip

    processing:             SET           capsIgnore=true

    processing:     

    processing:             FACE ADJ2EDGE tagType=trailingEdge

    processing:             SET           capsIgnore=true

WARNING:: toler =   5.0000e-06 for UDPRIM
                          Body     27 created  (toler= 5.0000e-06, nnode=  63, nedge= 137, nface=  99)
    executing [1305] udprim:     editAttr filename tmp_OpenCSM_00/04 (compiled code)
    processing:             FACE HAS        tagComp=leftWing

    processing:             ANDNOT ADJ2EDGE tagType=leadingEdge

    processing:             ANDNOT ADJ2EDGE tagType=trailingEdge

    processing:             ANDNOT ADJ2FACE tagType=trailingEdge

    processing:             SET             capsGroup=leftWingSkin

    processing:     

    processing:             FACE HAS        tagComp=riteWing

    processing:             ANDNOT ADJ2EDGE tagType=leadingEdge

    processing:             ANDNOT ADJ2EDGE tagType=trailingEdge

    processing:             ANDNOT ADJ2FACE tagType=trailingEdge

    processing:             SET             capsGroup=riteWingSkin

    processing:     

    processing:             FACE HAS        tagType=rib

    processing:             SET             capsGroup=wingRib

    processing: 

    processing:             FACE HAS        tagType=tip

    processing:             SET             capsGroup=wingRib

    processing:   

    processing:             FACE HAS        tagType=spar tagIndex=1

    processing:             SET             capsGroup=wingSpar1

    processing:             SET             capsMesh=wingSpar1

    processing: 

    processing:             FACE HAS        tagType=spar tagIndex=2

    processing:             SET             capsGroup=wingSpar2

    processing:             SET             capsMesh=wingSpar2

WARNING:: toler =   5.0000e-06 for UDPRIM
                          Body     28 created  (toler= 5.0000e-06, nnode=  63, nedge= 137, nface=  99)
    executing [1309] udprim:     editAttr filename tmp_OpenCSM_00/06 (compiled code)
    processing:         FACE HAS      tagType=upper

    processing:         SET           capsBound=upperWing

    processing: 

    processing:         FACE HAS      tagType=lower

    processing:         SET           capsBound=lowerWing

    processing: 

    processing:         FACE HAS      tagType=tip tagIndex=1

    processing:         SET           capsBound=leftTip

    processing: 

    processing:         FACE HAS      tagType=tip tagIndex=2

    processing:         SET           capsBound=riteTip

WARNING:: toler =   5.0000e-06 for UDPRIM
                          Body     29 created  (toler= 5.0000e-06, nnode=  63, nedge= 137, nface=  99)
    executing [1310] udprim:     editAttr filename tmp_OpenCSM_00/07 (compiled code)
    processing:         NODE ADJ2FACE tagComp=leftWing tagType=tip

    processing:         AND  ADJ2FACE tagType=lower

    processing:         AND  ADJ2FACE tagType=spar tagIndex=1

    processing:         SET           capsLoad=leftPointLoad

    processing: 

    processing:         NODE ADJ2FACE tagComp=riteWing tagType=tip

    processing:         AND  ADJ2FACE tagType=lower

    processing:         AND  ADJ2FACE tagType=spar tagIndex=1

    processing:         SET           capsLoad=ritePointLoad

WARNING:: toler =   5.0000e-06 for UDPRIM
                          Body     30 created  (toler= 5.0000e-06, nnode=  63, nedge= 137, nface=  99)
    executing [1311] select:   edge  tagType  leadingEdge  *  *  *  *
    executing [1312] dimension:     leadingEdges      1.00000      8.00000
    executing [1313] set:            leadingEdges  @sellist
                          leadingEdges[1,1] =     8.00000     0.00000
                          leadingEdges[1,2] =    31.00000     0.00000
                          leadingEdges[1,3] =    33.00000     0.00000
                          leadingEdges[1,4] =    62.00000     0.00000
                          leadingEdges[1,5] =    64.00000     0.00000
                          leadingEdges[1,6] =    94.00000     0.00000
                          leadingEdges[1,7] =    96.00000     0.00000
                          leadingEdges[1,8] =   121.00000     0.00000
    executing [1314] patbeg:         i      8.00000
                          pattern counter: i =   1
    executing [1315] select:   edge  8
                     putting Branch Attributes on Edge 8
    executing [1316] patend:
                          pattern counter: i =   2
    executing [1315] select:   edge  31
                     putting Branch Attributes on Edge 31
    executing [1316] patend:
                          pattern counter: i =   3
    executing [1315] select:   edge  33
                     putting Branch Attributes on Edge 33
    executing [1316] patend:
                          pattern counter: i =   4
    executing [1315] select:   edge  62
                     putting Branch Attributes on Edge 62
    executing [1316] patend:
                          pattern counter: i =   5
    executing [1315] select:   edge  64
                     putting Branch Attributes on Edge 64
    executing [1316] patend:
                          pattern counter: i =   6
    executing [1315] select:   edge  94
                     putting Branch Attributes on Edge 94
    executing [1316] patend:
                          pattern counter: i =   7
    executing [1315] select:   edge  96
                     putting Branch Attributes on Edge 96
    executing [1316] patend:
                          pattern counter: i =   8
    executing [1315] select:   edge  121
                     putting Branch Attributes on Edge 121
    executing [1316] patend:
    executing [1317] udprim:     editAttr filename tmp_OpenCSM_00/08 (compiled code)
    processing:         FACE ADJ2EDGE tagComp=leftWing

    processing:         SET           tagTemp=leadingEdgeFace

WARNING:: toler =   5.0000e-06 for UDPRIM
                          Body     31 created  (toler= 5.0000e-06, nnode=  63, nedge= 137, nface=  99)
    executing [1318] udprim:     editAttr filename tmp_OpenCSM_00/09 (compiled code)
    processing:         EDGE ADJ2FACE tagTemp=leadingEdgeFace

    processing:         AND  ADJ2FACE tagComp=rootWing

    processing:         SET           capsMesh=rootLeadingEdge

WARNING:: toler =   5.0000e-06 for UDPRIM
                          Body     32 created  (toler= 5.0000e-06, nnode=  63, nedge= 137, nface=  99)
    executing [1319] ifthen:             1.00000  EQ      1.00000  and      0.00000  eq      0.00000
    executing [1320] udprim:     editAttr filename tmp_OpenCSM_00/10 (compiled code)
    processing:             FACE HAS      tagComp=rootWing

    processing:             SET           capsConstraint=rootConstraint

    processing:        

    processing:             EDGE ADJ2FACE tagComp=rootWing

    processing:             SET  capsConstraint=rootConstraint

    processing:     

    processing:             NODE ADJ2FACE tagComp=rootWing

    processing:             SET  capsConstraint=rootConstraint

WARNING:: toler =   5.0000e-06 for UDPRIM
                          Body     33 created  (toler= 5.0000e-06, nnode=  63, nedge= 137, nface=  99)
    executing [1322] ifthen:             0.00000  EQ      1.00000  and  ...
    executing [1325] udprim:     editAttr filename tmp_OpenCSM_00/12 (compiled code)
    processing:         FACE HAS      tagComp=leftWing tagType=upper

    processing:         AND  ADJ2EDGE tagType=leadingEdge

    processing:         AND  ADJ2FACE tagComp=riteWing

    processing:         SET           tagCsys=leftWing

    processing: 

    processing:         FACE HAS      tagComp=riteWing tagType=upper

    processing:         AND  ADJ2EDGE tagType=leadingEdge

    processing:         AND  ADJ2FACE tagComp=leftWing

    processing:         SET           tagCsys=riteWing

WARNING:: toler =   5.0000e-06 for UDPRIM
                          Body     34 created  (toler= 5.0000e-06, nnode=  63, nedge= 137, nface=  99)
    executing [1326] select:   face  tagCsys  leftWing  *  *  *  *
    executing [1327] set:            leftWingSkinCsys  @sellist
                          leftWingSkinCsys =    27.00000     0.00000
    executing [1328] select:   face  tagCsys  riteWing  *  *  *  *
    executing [1329] set:            riteWingSkinCsys  @sellist
                          riteWingSkinCsys =     8.00000     0.00000
    executing [1330] store:      WingStruct      0.00000      0.00000
                          Body     34 stored
    executing [1331] restore:    WingStruct      0.00000
                          Body     35 restored (toler= 5.0000e-06, nnode=  63, nedge= 137, nface=  99)
    executing [1332] store:      WingStruct      0.00000      0.00000
WARNING:: storage WingStruct (0) is being overwritten
                          Body     35 stored
    executing [1334] restore:    WingStruct      0.00000
                          Body     36 restored (toler= 5.0000e-06, nnode=  63, nedge= 137, nface=  99)
    executing [1335] select:   body
                    putting Branch Attributes on Body
    executing [1336] ifthen:             0.00000  EQ      1.00000  and  ...
    executing [1339] end:
    executing [1341] ifthen:             0.00000  NE      0.00000  and  ...
    executing [1378] end:
    finalizing:
==> Profile information
    Branch type           ncall  time (sec)    pct
    dimension                 1       0.001    0.0
    udprim                   14       1.490   10.1
    restore                   8       0.138    0.9
    rule                      1       0.197    1.3
    intersect                 1       0.972    6.6
    subtract                  1       2.857   19.3
    union                     1       7.010   47.3
    join                      1       0.179    1.2
    extract                   1       1.548   10.4
    translate                 2       0.025    0.2
    rotatex                   2       0.007    0.0
    rotatey                   1       0.003    0.0
    scale                     2       0.007    0.0
    mirror                    1       0.040    0.3
    interface                 3       0.001    0.0
    end                       3       0.000    0.0
    set                      60       0.103    0.7
    udparg                    3       0.008    0.1
    select                   23       0.174    1.2
    store                     6       0.008    0.1
    patbeg                    1       0.002    0.0
    patend                    8       0.007    0.0
    ifthen                   43       0.039    0.3
    else                      2       0.000    0.0
    endif                    43       0.000    0.0
    catbeg                    1       0.001    0.0
    catend                    1       0.000    0.0
    mark                      1       0.001    0.0
    Total                   235      14.818
Mapping capsGroup attributes ................
	Number of unique capsGroup attributes = 5
	Name = wingSpar1, index = 1
	Name = riteWingSkin, index = 2
	Name = wingRib, index = 3
	Name = leftWingSkin, index = 4
	Name = wingSpar2, index = 5
Mapping capsMesh attributes ................
	Number of unique capsMesh attributes = 4
	Name = wingSpar1, index = 1
	Name = wingSpar2, index = 2
	Name = leadingEdge, index = 3
	Name = rootLeadingEdge, index = 4
Getting surface mesh for body 1 (of 1)
	Tessellating body
	capsIgnore attribute found for face - 3!!
	capsIgnore attribute found for face - 8!!
	capsIgnore attribute found for face - 15!!
	capsIgnore attribute found for face - 16!!
	capsIgnore attribute found for face - 17!!
	capsIgnore attribute found for face - 18!!
	capsIgnore attribute found for face - 26!!
	capsIgnore attribute found for face - 27!!
	capsIgnore attribute found for face - 33!!
	capsIgnore attribute found for face - 36!!
	capsIgnore attribute found for face - 37!!
	capsIgnore attribute found for face - 38!!
	capsIgnore attribute found for face - 39!!
	capsIgnore attribute found for face - 40!!
	capsIgnore attribute found for face - 41!!
	capsIgnore attribute found for face - 42!!
	capsIgnore attribute found for face - 50!!
	capsIgnore attribute found for face - 51!!
	capsIgnore attribute found for face - 52!!
	capsIgnore attribute found for face - 58!!
	capsIgnore attribute found for face - 61!!
	capsIgnore attribute found for face - 62!!
	capsIgnore attribute found for face - 63!!
	capsIgnore attribute found for face - 64!!
	capsIgnore attribute found for face - 65!!
	capsIgnore attribute found for face - 66!!
	capsIgnore attribute found for face - 73!!
	capsIgnore attribute found for face - 74!!
	capsIgnore attribute found for face - 75!!
	capsIgnore attribute found for face - 81!!
	capsIgnore attribute found for face - 83!!
	capsIgnore attribute found for face - 84!!
	capsIgnore attribute found for face - 85!!
	capsIgnore attribute found for face - 86!!
	capsIgnore attribute found for face - 89!!
	capsIgnore attribute found for face - 90!!
	capsIgnore attribute found for face - 91!!
	capsIgnore attribute found for face - 96!!
	capsIgnore attribute found for face - 97!!
	capsIgnore attribute found for face - 98!!
Number of nodes = 299
Number of elements = 387
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 0
Number of quadrilateral elements = 387
----------------------------
Total number of nodes = 299
Total number of elements = 387
Analysis directory does not currently exist - it will be made automatically
 CAPS Info: No symbol for aimExecute in astrosAIM
 CAPS Info: No symbol for aimCheck in astrosAIM
 CAPS Info: No symbol for aimData in astrosAIM
 CAPS Info: No symbol for aimSensitivity in astrosAIM

==> Running ASTROS pre-analysis...
Mapping Csys attributes ................
	Number of unique Csys attributes = 2
	Name = leftWingSkin, index = 1
	Name = riteWingSkin, index = 2

Getting FEA coordinate systems.......
	Number of coordinate systems - 2
	Coordinate system name - leftWingSkin
	Coordinate system name - riteWingSkin
Mapping capsConstraint attributes ................
	Number of unique capsConstraint attributes = 1
	Name = rootConstraint, index = 1
Mapping capsLoad attributes ................
	Number of unique capsLoad attributes = 2
	Name = ritePointLoad, index = 1
	Name = leftPointLoad, index = 2
Mapping capsBound attributes ................
	Number of unique capsBound attributes = 4
	Name = lowerWing, index = 1
	Name = upperWing, index = 2
	Name = riteTip, index = 3
	Name = leftTip, index = 4
Mapping capsConnect attributes ................
	Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
	Number of unique capsResponse attributes = 0
Found link for attrMap (Attribute_Map) from parent
Found link for a Surface mesh from parent
capsIgnore attribute found. Removing unneeded nodes and elements from mesh!
Removing unused nodes...
	Removed 64 (out of 299) unused nodes!
Setting FEA Data
	Mesh for body = 0
	Number of nodal coordinates = 235
	Number of elements = 227
	Elemental Nodes = 0
	Elemental Rods  = 0
	Elemental Tria3 = 0
	Elemental Quad4 = 227

Getting FEA materials.......
	Number of materials - 2
	Material name - Aluminum
	No "materialType" specified for Material tuple Aluminum, defaulting to "Isotropic"
	Material name - Graphite_epoxy
	Done getting FEA materials

Getting FEA properties.......
	Number of properties - 5
	Property name - leftWingSkin
	Property name - riteWingSkin
	Property name - wingRib
	Property name - wingSpar1
	Property name - wingSpar2
	Done getting FEA properties
Updating mesh element types based on properties input

Getting FEA constraints.......
	Number of constraints - 1
	Constraint name - rootConstraint
	No "constraintType" specified for Constraint tuple rootConstraint, defaulting to "ZeroDisplacement"
	Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults

Getting FEA loads.......
	Number of loads - 2
	Load name - leftPointLoad
	No "groupName" specified for Load tuple leftPointLoad, going to use load name
	Load name - ritePointLoad
	No "groupName" specified for Load tuple ritePointLoad, going to use load name
	Done getting FEA loads
Design_Variable tuple is NULL - No design variables applied
Design_Constraint tuple is NULL - No design constraints applied
Analysis tuple is NULL

Getting FEA analyses.......
	Number of analyses - 1
	Analysis name - Default
	Done getting FEA analyses

Writing Astros grid and connectivity file (in large field format) ....
Finished writing Astros grid file

Writing subElement types (if any) - appending mesh file

Writing Astros instruction file....
	Writing analysis cards
	Writing load ADD cards
	Writing constraint cards--each subcase individually
	Writing load cards
	Writing material cards
	Writing property cards
	Writing coordinate system cards

==> Running Astros...
Note: The following floating-point exceptions are signalling: IEEE_UNDERFLOW_FLAG IEEE_DENORMAL

--> Maximum displacements:
--> Tmax 12131.654370141774
--> T1max 275.241
--> T2max 1005.74
--> T3max 12103.5
--> temporary directory "tmp_OpenCSM_00" removed
 Cleaning up egadsInstance - 0
 Cleaning up astrosInstance - 0
 EGADS Info: 861 Objects, 1379 Reference in Use (of 34591) at Close!

real	0m17.782s
user	0m0.109s
sys	0m0.311s
+ status=0
+ set +x

=================================================
data/session10/astros_4_Composite.py passed (as expected)
=================================================


=================================================
nastran_5_Flutter.py test;
+ python nastran_5_Flutter.py
+ tee -a /c/Users/jenkins/workspace/ESP_QuickTestCaps/7.4/CAPS/training/WIN64.2017/CAPS/training/training.log
Definition of "kt" in "\Users\jenkins\workspace\ESP_QuickTestCaps\7.4\CAPS\training\WIN64.2017\ESP\udunits\/udunits2-common.xml", line 90, overrides prefixed-unit "1000000 kilogram"
Definition of "microns" in "\Users\jenkins\workspace\ESP_QuickTestCaps\7.4\CAPS\training\WIN64.2017\ESP\udunits\/udunits2-common.xml", line 336, overrides prefixed-unit "1e-15 second"
Definition of "ft" in "\Users\jenkins\workspace\ESP_QuickTestCaps\7.4\CAPS\training\WIN64.2017\ESP\udunits\/udunits2-common.xml", line 433, overrides prefixed-unit "1e-12 kilogram"
Definition of "yd" in "\Users\jenkins\workspace\ESP_QuickTestCaps\7.4\CAPS\training\WIN64.2017\ESP\udunits\/udunits2-common.xml", line 441, overrides prefixed-unit "8.64e-20 second"
Definition of "pt" in "\Users\jenkins\workspace\ESP_QuickTestCaps\7.4\CAPS\training\WIN64.2017\ESP\udunits\/udunits2-common.xml", line 655, overrides prefixed-unit "1e-09 kilogram"
Definition of "at" in "\Users\jenkins\workspace\ESP_QuickTestCaps\7.4\CAPS\training\WIN64.2017\ESP\udunits\/udunits2-common.xml", line 1052, overrides prefixed-unit "1e-15 kilogram"
Definition of "ph" in "\Users\jenkins\workspace\ESP_QuickTestCaps\7.4\CAPS\training\WIN64.2017\ESP\udunits\/udunits2-common.xml", line 1571, overrides prefixed-unit "3.6e-09 second"
Definition of "nt" in "\Users\jenkins\workspace\ESP_QuickTestCaps\7.4\CAPS\training\WIN64.2017\ESP\udunits\/udunits2-common.xml", line 1578, overrides prefixed-unit "1e-06 kilogram"
--> enter ocsmCheck()
--> checks passed
--> enter ocsmSave(filename=capsTmp.cpc)
--> enter ocsmCheck()
--> checks passed
 CAPS Info: No symbol for aimDiscr in egadsTessAIM
 CAPS Info: No symbol for aimFreeDiscr in egadsTessAIM
 CAPS Info: No symbol for aimLocateElement in egadsTessAIM
 CAPS Info: No symbol for aimUsesDataSet in egadsTessAIM
 CAPS Info: No symbol for aimCheck in egadsTessAIM
 CAPS Info: No symbol for aimTransfer in egadsTessAIM
 CAPS Info: No symbol for aimInterpolation in egadsTessAIM
 CAPS Info: No symbol for aimInterpolateBar in egadsTessAIM
 CAPS Info: No symbol for aimIntegration in egadsTessAIM
 CAPS Info: No symbol for aimIntegrateBar in egadsTessAIM
 CAPS Info: No symbol for aimSensitivity in egadsTessAIM

==> Generating Mesh...
--> enter ocsmBuild(buildTo=0)
--> enter ocsmCheck()
--> checks passed

    Interim EGADS version  1.19 (with  OpenCASCADE 7.4.1)

    executing [   1] udprim:     $/capsHeader (scripted code)
              [   2] interface:  .  ALL      0.00000
    executing [   3] set:            makeFuseOml  0
                          makeFuseOml =     0.00000     0.00000
    executing [   4] set:            makeFuseWaffle  0
                          makeFuseWaffle =     0.00000     0.00000
    executing [   5] set:            makeFuseCmass  0
                          makeFuseCmass =     0.00000     0.00000
    executing [   6] set:            makeWingOml  0
                          makeWingOml =     0.00000     0.00000
    executing [   7] set:            makeWingHinge  0
                          makeWingHinge =     0.00000     0.00000
    executing [   8] set:            makeWingWaffle  0
                          makeWingWaffle =     0.00000     0.00000
    executing [   9] set:            makeWingCmass  0
                          makeWingCmass =     0.00000     0.00000
    executing [  10] set:            makeHtailOml  0
                          makeHtailOml =     0.00000     0.00000
    executing [  11] set:            makeHtailHinge  0
                          makeHtailHinge =     0.00000     0.00000
    executing [  12] set:            makeHtailWaffle  0
                          makeHtailWaffle =     0.00000     0.00000
    executing [  13] set:            makeHtailCmass  0
                          makeHtailCmass =     0.00000     0.00000
    executing [  14] set:            makeVtailOml  0
                          makeVtailOml =     0.00000     0.00000
    executing [  15] set:            makeVtailHinge  0
                          makeVtailHinge =     0.00000     0.00000
    executing [  16] set:            makeVtailWaffle  0
                          makeVtailWaffle =     0.00000     0.00000
    executing [  17] set:            makeVtailCmass  0
                          makeVtailCmass =     0.00000     0.00000
    executing [  18] set:            makePylonOml  0
                          makePylonOml =     0.00000     0.00000
    executing [  19] set:            makePodOml  0
                          makePodOml =     0.00000     0.00000
    executing [  20] set:            SHARP_TE  0
                          SHARP_TE =     0.00000     0.00000
    executing [  21] ifthen:             0.00000  EQ      1.00000  and  ...
    executing [  24] ifthen:             0.00000  NE      0.00000  and  ...
    executing [  40] ifthen:             0.00000  EQ      1.00000  and  ...
    executing [  43] ifthen:             1.00000  NE      0.00000  and      0.00000  eq      0.00000
    executing [  44] set:            makeWingOml  1
                          makeWingOml =     1.00000     0.00000
    executing [  45] set:            makeWingHinge  1
                          makeWingHinge =     1.00000     0.00000
    executing [  46] set:            makeHtailOml  1
                          makeHtailOml =     1.00000     0.00000
    executing [  47] set:            makeHtailHinge  1
                          makeHtailHinge =     1.00000     0.00000
    executing [  48] set:            makeVtailOml  1
                          makeVtailOml =     1.00000     0.00000
    executing [  49] set:            makeVtailHinge  1
                          makeVtailHinge =     1.00000     0.00000
    executing [  51] ifthen:             0.00000  EQ      1.00000  and  ...
    executing [  54] ifthen:             0.00000  NE      0.00000  and  ...
    executing [  65] ifthen:             0.00000  EQ      1.00000  and  ...
    executing [  68] ifthen:             0.00000  NE      0.00000  and  ...
    executing [  79] ifthen:             0.00000  EQ      1.00000  and  ...
    executing [  82] ifthen:             0.00000  EQ      1.00000  and  ...
    executing [  85] ifthen:             0.00000  EQ      1.00000  and  ...
    executing [  88] ifthen:             1.00000  NE      0.00000  OR  ...
    executing [  89] set:            makeWingOml  1
                          makeWingOml =     1.00000     0.00000
    executing [  90] set:            makeWingWaffle  1
                          makeWingWaffle =     1.00000     0.00000
    executing [  92] ifthen:             0.00000  EQ      1.00000  and  ...
    executing [  95] ifthen:             0.00000  NE      0.00000  and  ...
    executing [ 101] ifthen:             1.00000  EQ      1.00000  and      0.00000  eq      0.00000
    executing [ 102] set:            COMP:Fuse  0
                          COMP:Fuse =     0.00000     0.00000
    executing [ 104] ifthen:             0.00000  EQ      1.00000  and  ...
    executing [ 107] ifthen:             1.00000  EQ      1.00000  and      0.00000  eq      0.00000
    executing [ 108] set:            COMP:Htail  0
                          COMP:Htail =     0.00000     0.00000
    executing [ 110] ifthen:             1.00000  EQ      1.00000  and      0.00000  eq      0.00000
    executing [ 111] set:            COMP:Vtail  0
                          COMP:Vtail =     0.00000     0.00000
    executing [ 113] ifthen:             1.00000  EQ      1.00000  and      0.00000  eq      0.00000
    executing [ 114] set:            COMP:Pylon  0
                          COMP:Pylon =     0.00000     0.00000
    executing [ 116] ifthen:             1.00000  EQ      1.00000  and      0.00000  eq      0.00000
    executing [ 117] set:            COMP:Pod  0
                          COMP:Pod =     0.00000     0.00000
    executing [ 119] ifthen:             1.00000  EQ      1.00000  and      0.00000  eq      0.00000
    executing [ 120] set:            COMP:Control  0
                          COMP:Control =     0.00000     0.00000
    executing [ 122] ifthen:             0.00000  EQ      0.00000  and      0.00000  eq      0.00000
    executing [ 123] set:            makeFuseOml  0
                          makeFuseOml =     0.00000     0.00000
    executing [ 124] set:            makeFuseWaffle  0
                          makeFuseWaffle =     0.00000     0.00000
    executing [ 125] set:            makeFuseCmass  0
                          makeFuseCmass =     0.00000     0.00000
    executing [ 127] ifthen:             1.00000  EQ      0.00000  and  ...
    executing [ 133] ifthen:             0.00000  EQ      0.00000  and      0.00000  eq      0.00000
    executing [ 134] set:            makeHtailOml  0
                          makeHtailOml =     0.00000     0.00000
    executing [ 135] set:            makeHtailHinge  0
                          makeHtailHinge =     0.00000     0.00000
    executing [ 136] set:            makeHtailWaffle  0
                          makeHtailWaffle =     0.00000     0.00000
    executing [ 137] set:            makeHtailCmass  0
                          makeHtailCmass =     0.00000     0.00000
    executing [ 139] ifthen:             0.00000  EQ      0.00000  and      0.00000  eq      0.00000
    executing [ 140] set:            makeVtailOml  0
                          makeVtailOml =     0.00000     0.00000
    executing [ 141] set:            makeVtailHinge  0
                          makeVtailHinge =     0.00000     0.00000
    executing [ 142] set:            makeVtailWaffle  0
                          makeVtailWaffle =     0.00000     0.00000
    executing [ 143] set:            makeVtailCmass  0
                          makeVtailCmass =     0.00000     0.00000
    executing [ 145] ifthen:             0.00000  EQ      0.00000  and      0.00000  eq      0.00000
    executing [ 146] set:            makePylonOml  0
                          makePylonOml =     0.00000     0.00000
    executing [ 148] ifthen:             0.00000  EQ      0.00000  and      0.00000  eq      0.00000
    executing [ 149] set:            makePodOml  0
                          makePodOml =     0.00000     0.00000
    executing [ 151] ifthen:             0.00000  EQ      0.00000  and      0.00000  eq      0.00000
    executing [ 152] set:            makeWingHinge  0
                          makeWingHinge =     0.00000     0.00000
    executing [ 153] set:            makeHtailHinge  0
                          makeHtailHinge =     0.00000     0.00000
    executing [ 154] set:            makeVtailHinge  0
                          makeVtailHinge =     0.00000     0.00000
    executing [ 156] end:
    executing [ 157] set:            wing:span  sqrt(wing:aspect*wing:area)
                          wing:span =     7.74597     0.00000
    executing [ 158] set:            wing:chordr  2*wing:area/wing:span/(1+wing:taper)
                          wing:chordr =     1.61374     0.00000
    executing [ 159] set:            wing:chordt  wing:chordr*wing:taper
                          wing:chordt =     0.96825     0.00000
    executing [ 160] set:            wing:ytip  -wing:span/2
                          wing:ytip =    -3.87298     0.00000
    executing [ 161] set:            wing:xtip  -wing:ytip*tand(wing:sweep)
                          wing:xtip =     1.40965     0.00000
    executing [ 162] set:            wing:ztip  -wing:ytip*tand(wing:dihedral)
                          wing:ztip =     0.27083     0.00000
    executing [ 163] set:            wing:mac  sqrt(wing:area/wing:aspect)
                          wing:mac =     1.29099     0.00000
    executing [ 164] ifthen:             1.00000  EQ      1.00000  and      0.00000  eq      0.00000
    executing [ 165] mark:
                          Mark        created
    executing [ 166] udprim:     naca thickness     0.12000 camber     0.06000 sharpte     0.00000 (compiled code)
                          Body      1 created  (toler= 1.0000e-07, nnode=   3, nedge=   3, nface=   1)
    executing [ 167] scale:          1.61374      0.00000      0.00000      0.00000
                          Body      2 created  (toler= 1.6137e-07, nnode=   3, nedge=   3, nface=   1)
    executing [ 168] rotatex:       90.00000      0.00000      0.00000
                          Body      3 created  (toler= 1.6137e-07, nnode=   3, nedge=   3, nface=   1)
    executing [ 169] udprim:     naca thickness     0.16000 camber     0.02000 sharpte     0.00000 (compiled code)
                          Body      4 created  (toler= 1.0000e-07, nnode=   3, nedge=   3, nface=   1)
    executing [ 170] scale:          0.96825      0.00000      0.00000      0.00000
                          Body      5 created  (toler= 1.0000e-07, nnode=   3, nedge=   3, nface=   1)
    executing [ 171] rotatex:       90.00000      0.00000      0.00000
                          Body      6 created  (toler= 1.0000e-07, nnode=   3, nedge=   3, nface=   1)
    executing [ 172] rotatey:       -5.00000      0.00000      0.00000
                          Body      7 created  (toler= 1.0000e-07, nnode=   3, nedge=   3, nface=   1)
    executing [ 173] translate:      1.40965     -3.87298      0.27083
                          Body      8 created  (toler= 1.0000e-07, nnode=   3, nedge=   3, nface=   1)
    executing [ 174] rule:           0.00000      0.00000
                          ruling  2 Xsects with 3 Strips each...
                          Body      9 created  (toler= 1.0000e-07, nnode=   6, nedge=   9, nface=   5)
    executing [ 175] set:            ruledBody  @nbody
                          ruledBody =     9.00000     0.00000
    executing [ 176] select:   face  9  1
                     putting Branch Attributes on Face 4
    executing [ 177] select:   face  9  2
                     putting Branch Attributes on Face 5
    executing [ 178] select:   face  9  3
                     putting Branch Attributes on Face 1
    executing [ 179] select:   face  9  4
                     putting Branch Attributes on Face 2
    executing [ 180] select:   edge  9  3  9  4  1
                     putting Branch Attributes on Edge 3
    executing [ 181] ifthen:             0.00000  EQ      0.00000  and      0.00000  eq      0.00000
    executing [ 182] select:   face  9  5
                     putting Branch Attributes on Face 3
    executing [ 186] store:      LeftWing      0.00000      1.00000
                          Body      9 stored
    executing [ 187] restore:    LeftWing      0.00000
                          Body     10 restored (toler= 1.0000e-07, nnode=   6, nedge=   9, nface=   5)
    executing [ 188] select:   face  tagType  tip  *  *  *  *
                     putting Branch Attributes on Face 5
    executing [ 189] select:   edge  tagType  leadingEdge  *  *  *  *
    executing [ 190] ifthen:             3.00000  GT      0.00000  and      0.00000  eq      0.00000
    executing [ 191] select:   edge  tagType  leadingEdge  *  *  *  *
                     putting Branch Attributes on Edge 3
    executing [ 193] select:   edge  tagType  trailingEdge  *  *  *  *
ERROR:: (edge_not_found) in Branch Brch_000193 at [[..\ESP\wing3.csm:103]]
        SELECT specified nonexistant Edge
    executing [ 197] catbeg:         $edge_not_found
    --> catching signal -223 (edge_not_found)
    executing [ 199] mirror:         0.00000      1.00000      0.00000      0.00000
                          Body     11 created  (toler= 1.0000e-07, nnode=   6, nedge=   9, nface=   5)
    executing [ 200] join:           0.00000      0.00000
                          Body     12 created  (toler= 1.0000e-07, nnode=   9, nedge=  15, nface=   8)
    executing [ 201] select:   edge  9  3  9  3  1
                     putting Branch Attributes on Edge 2
    executing [ 202] select:   edge  9  4  9  4  1
                     putting Branch Attributes on Edge 5
    executing [ 203] store:      WingOml      0.00000      0.00000
                          Body     12 stored
    executing [ 205] ifthen:             1.00000  EQ      1.00000  and      0.00000  eq      0.00000
    executing [ 206] restore:    WingOml      0.00000
                          Body     13 restored (toler= 1.0000e-07, nnode=   9, nedge=  15, nface=   8)
    executing [ 207] set:            xmin  @xmin-0.1
                          xmin =    -0.10102     0.00000
    executing [ 208] set:            xmax  @xmax+0.1
                          xmax =     2.47425     0.00000
    executing [ 209] set:            ymin  0
                          ymin =     0.00000     0.00000
    executing [ 210] set:            ymax  @ymax+0.1
                          ymax =     3.97298     0.00000
    executing [ 211] set:            zmin  @zmin-0.1
                          zmin =    -0.13316     0.00000
    executing [ 212] set:            zmax  @zmax+0.1
                          zmax =     0.49998     0.00000
    executing [ 213] store:      .      0.00000      0.00000
                          Body     13 removed from stack
    executing [ 214] udparg:     waffle depth     3.00000 
                          Body     14 created  (NULL Body)
    executing [ 215] udparg:     waffle depth     0.20000 
                          Body     15 created  (NULL Body)
    executing [ 216] udparg:     waffle depth     0.70000 
                          Body     16 created  (NULL Body)
    executing [ 217] udprim:     waffle depth     0.63315 filename tmp_OpenCSM_00/00 (compiled code)
    processing: 
    processing:         # construction lines for spars
    processing:         CPOINT A   AT          0+wing:spar1*wing:chordr 0
    processing:         CPOINT B   AT  wing:xtip+wing:spar1*wing:chordt -wing:ytip
    processing:         CPOINT C   AT          0+wing:spar2*wing:chordr 0
    processing:         CPOINT D   AT  wing:xtip+wing:spar2*wing:chordt -wing:ytip
    processing: 
    processing:         CLINE  AB      A  B
    processing:         CLINE  CD      C  D
    processing: 
    processing:         # rite spars
    processing:         POINT  E   ON  AB   YLOC  ymin
    processing:         POINT  F   ON  AB   YLOC  ymax
    processing:         LINE   EF  E   F  tagComp=riteWing  tagType=spar  tagIndex=1
    processing: 
    processing:         POINT  G   ON  CD   YLOC  ymin
    processing:         POINT  H   ON  CD   YLOC  ymax
    processing:         LINE   GH  G   H  tagComp=riteWing  tagType=spar tagIndex=2
    processing: 
    processing:         # rite ribs
    processing:         PATBEG  irib  wing:nrib
    processing:             CPOINT  I  AT  xmin  -wing:ytip*irib/(wing:nrib+1)
    processing:             CPOINT  J  AT  xmax  y@I
    processing:             LINE    .   I  J  tagComp=riteWing  tagType=rib   tagIndex=!val2str(irib,0)
    processing:         PATEND
    processing:             CPOINT  I  AT  xmin  -wing:ytip*irib/(wing:nrib+1)
    processing:             CPOINT  J  AT  xmax  y@I
    processing:             LINE    .   I  J  tagComp=riteWing  tagType=rib   tagIndex=!val2str(irib,0)
    processing:         PATEND
    processing:             CPOINT  I  AT  xmin  -wing:ytip*irib/(wing:nrib+1)
    processing:             CPOINT  J  AT  xmax  y@I
    processing:             LINE    .   I  J  tagComp=riteWing  tagType=rib   tagIndex=!val2str(irib,0)
    processing:         PATEND
    processing: 
    processing:         # root rib
    processing:         CPOINT  I  AT  xmin  0
    processing:         CPOINT  J  AT  xmax  y@I
    processing:         LINE    .   I  J  tagComp=rootWing  tagType=rib   tagIndex=0
    processing: 
    processing:         # left spars
    processing:         POINT  E   AT  x@E  -y@E
    processing:         POINT  F   AT  x@F  -y@F
    processing:         LINE   FE  F   E  tagComp=leftWing  tagType=spar  tagIndex=1
    processing: 
    processing:         POINT  G   AT  x@G  -y@G
    processing:         POINT  H   AT  x@H  -y@H
    processing:         LINE   HG  H   G  tagComp=leftWing  tagType=spar tagIndex=2
    processing: 
    processing:         # left ribs
    processing:         PATBEG  irib  wing:nrib
    processing:             CPOINT  I  AT  xmin  wing:ytip*irib/(wing:nrib+1)
    processing:             CPOINT  J  AT  xmax  y@I
    processing:             LINE    .   I  J  tagComp=leftWing  tagType=rib   tagIndex=!val2str(irib,0)
    processing:         PATEND
    processing:             CPOINT  I  AT  xmin  wing:ytip*irib/(wing:nrib+1)
    processing:             CPOINT  J  AT  xmax  y@I
    processing:             LINE    .   I  J  tagComp=leftWing  tagType=rib   tagIndex=!val2str(irib,0)
    processing:         PATEND
    processing:             CPOINT  I  AT  xmin  wing:ytip*irib/(wing:nrib+1)
    processing:             CPOINT  J  AT  xmax  y@I
    processing:             LINE    .   I  J  tagComp=leftWing  tagType=rib   tagIndex=!val2str(irib,0)
    processing:         PATEND
                          Body     17 created  (toler= 1.0000e-07, nnode=  64, nedge= 106, nface=  37)
    executing [ 218] translate:      0.00000      0.00000     -0.13316
                          Body     18 created  (toler= 1.0000e-07, nnode=  64, nedge= 106, nface=  37)
    executing [ 219] store:      WingWaffle      0.00000      0.00000
                          Body     18 stored
    executing [ 221] udprim:     $/capsViews (scripted code)
              [ 222] interface:  .  ALL      0.00000
    executing [ 223] ifthen:             0.00000  NE      0.00000  and  ...
    executing [ 268] ifthen:             1.00000  NE      0.00000  and      0.00000  eq      0.00000
    executing [ 269] udprim:     $/viewVLM (scripted code)
              [ 270] interface:  .  ALL      0.00000
    executing [ 271] set:            vlmAIMs  $avlAIM;$astrosAIM;nastranAIM;egadsTessAIM
                          vlmAIMs = $avlAIM;$astrosAIM;nastranAIM;egadsTessAIM
    executing [ 272] ifthen:             1.00000  EQ      1.00000  and      0.00000  eq      0.00000
    executing [ 273] restore:    WingOml      0.00000
                          Body     19 restored (toler= 1.0000e-07, nnode=   9, nedge=  15, nface=   8)
    executing [ 274] set:            xmin  @xmin-1
                          xmin =    -1.00102     0.00000
    executing [ 275] set:            xmax  @xmax+1
                          xmax =     3.37425     0.00000
    executing [ 276] set:            ymin  @ymin+0.001
                          ymin =    -3.87198     0.00000
    executing [ 277] set:            ymax  @ymax-0.001
                          ymax =     3.87198     0.00000
    executing [ 278] set:            zmin  @zmin-1
                          zmin =    -1.03316     0.00000
    executing [ 279] set:            zmax  @zmax+1
                          zmax =     1.39998     0.00000
    executing [ 280] store:      .      0.00000      0.00000
                          Body     19 removed from stack
    executing [ 281] set:            WingVlmNcut  3
                          WingVlmNcut =     3.00000     0.00000
    executing [ 282] mark:
                          Mark        created
    executing [ 283] patbeg:         icut      3.00000
                          pattern counter: icut =   1
    executing [ 284] set:            y  ymin+(ymax-ymin)*(icut-1)/(WingVlmNcut-1)
                          y =    -3.87198     0.00000
    executing [ 285] box:           -1.00102     -3.87198     -1.03316      4.37527      0.00000      2.43315
                          Body     20 created  (toler= 1.0000e-07, nnode=   4, nedge=   4, nface=   1)
    executing [ 286] restore:    WingOml      0.00000
                          Body     21 restored (toler= 1.0000e-07, nnode=   9, nedge=  15, nface=   8)
    executing [ 287] intersect:  none      1.00000   0.0000e+00
                          Body     22 created  (toler= 5.0000e-06, nnode=   3, nedge=   3, nface=   1)
    executing [ 288] select:   face  1
                     putting Branch Attributes on Face 1
    executing [ 289] patend:
                          pattern counter: icut =   2
    executing [ 284] set:            y  ymin+(ymax-ymin)*(icut-1)/(WingVlmNcut-1)
                          y =     0.00000     0.00000
    executing [ 285] box:           -1.00102      0.00000     -1.03316      4.37527      0.00000      2.43315
                          Body     23 created  (toler= 1.0000e-07, nnode=   4, nedge=   4, nface=   1)
    executing [ 286] restore:    WingOml      0.00000
                          Body     24 restored (toler= 1.0000e-07, nnode=   9, nedge=  15, nface=   8)
    executing [ 287] intersect:  none      1.00000   0.0000e+00
                          Body     25 created  (toler= 1.0000e-07, nnode=   3, nedge=   3, nface=   1)
    executing [ 288] select:   face  1
                     putting Branch Attributes on Face 1
    executing [ 289] patend:
                          pattern counter: icut =   3
    executing [ 284] set:            y  ymin+(ymax-ymin)*(icut-1)/(WingVlmNcut-1)
                          y =     3.87198     0.00000
    executing [ 285] box:           -1.00102      3.87198     -1.03316      4.37527      0.00000      2.43315
                          Body     26 created  (toler= 1.0000e-07, nnode=   4, nedge=   4, nface=   1)
    executing [ 286] restore:    WingOml      0.00000
                          Body     27 restored (toler= 1.0000e-07, nnode=   9, nedge=  15, nface=   8)
    executing [ 287] intersect:  none      1.00000   0.0000e+00
                          Body     28 created  (toler= 5.0000e-06, nnode=   3, nedge=   3, nface=   1)
    executing [ 288] select:   face  1
                     putting Branch Attributes on Face 1
    executing [ 289] patend:
    executing [ 290] ifthen:             1.00000  EQ      0.00000  and  ...
    executing [ 299] ifthen:             0.00000  EQ      1.00000  and  ...
    executing [ 321] group:             0.00000
                          Body     25 added to Group   28
                          Body     22 added to Group   28
    executing [ 323] ifthen:             0.00000  EQ      1.00000  and  ...
    executing [ 365] ifthen:             0.00000  EQ      1.00000  and  ...
    executing [ 407] end:
    executing [ 409] ifthen:             0.00000  NE      0.00000  and  ...
    executing [ 852] ifthen:             0.00000  NE      0.00000  and  ...
    executing [1290] ifthen:             1.00000  NE      0.00000  OR  ...
    executing [1291] udprim:     $/viewStructure (scripted code)
              [1292] interface:  .  ALL      0.00000
    executing [1293] set:            structAIMs  $nastranAIM;astrosAIM;mystranAIM;egadsTessAIM
                          structAIMs = $nastranAIM;astrosAIM;mystranAIM;egadsTessAIM
    executing [1294] ifthen:             1.00000  EQ      1.00000  and      0.00000  eq      0.00000
    executing [1295] restore:    WingOml      0.00000
                          Body     29 restored (toler= 1.0000e-07, nnode=   9, nedge=  15, nface=   8)
    executing [1296] restore:    WingWaffle      0.00000
                          Body     30 restored (toler= 1.0000e-07, nnode=  64, nedge= 106, nface=  37)
    executing [1297] intersect:  none      1.00000   0.0000e+00
                          Body     31 created  (toler= 5.0000e-06, nnode=  57, nedge=  99, nface=  37)
    executing [1298] restore:    WingOml      0.00000
                          Body     32 restored (toler= 1.0000e-07, nnode=   9, nedge=  15, nface=   8)
    executing [1299] restore:    WingWaffle      0.00000
                          Body     33 restored (toler= 1.0000e-07, nnode=  64, nedge= 106, nface=  37)
    executing [1300] subtract:   none      1.00000   0.0000e+00
                          Body     34 created  (toler= 6.7429e-07, nnode=  63, nedge= 123, nface=  62)
    executing [1301] extract:    0
                          Body     35 created  (toler= 6.7429e-07, nnode=  63, nedge= 123, nface=  62)
    executing [1302] union:          0.00000  0   0.0000e+00
                          Body     36 created  (toler= 5.0000e-06, nnode=  63, nedge= 137, nface=  99)
    executing [1303] ifthen:             0.00000  EQ      1.00000  and  ...
    executing [1306] else:
    executing [1307] udprim:     editAttr filename tmp_OpenCSM_00/05 (compiled code)
    processing:             FACE HAS        tagComp=leftWing

    processing:             SET             capsGroup=leftWingSkin

    processing:     

    processing:             FACE HAS        tagComp=riteWing

    processing:             SET             capsGroup=riteWingSkin

    processing:     

    processing:             FACE HAS        tagType=tip

    processing:             SET             capsGroup=wingRib

    processing:     

    processing:             FACE HAS        tagType=trailingEdge

    processing:             SET             capsGroup=wingTE

    processing:     

    processing:             FACE HAS        tagType=rib

    processing:             SET             capsGroup=wingRib

    processing: 

    processing:             FACE HAS        tagType=spar tagIndex=1

    processing:             SET             capsGroup=wingSpar1

    processing:             SET             capsMesh=wingSpar1

    processing: 

    processing:             FACE HAS        tagType=spar tagIndex=2

    processing:             SET             capsGroup=wingSpar2

    processing:             SET             capsMesh=wingSpar2

WARNING:: toler =   5.0000e-06 for UDPRIM
                          Body     37 created  (toler= 5.0000e-06, nnode=  63, nedge= 137, nface=  99)
    executing [1309] udprim:     editAttr filename tmp_OpenCSM_00/06 (compiled code)
    processing:         FACE HAS      tagType=upper

    processing:         SET           capsBound=upperWing

    processing: 

    processing:         FACE HAS      tagType=lower

    processing:         SET           capsBound=lowerWing

    processing: 

    processing:         FACE HAS      tagType=tip tagIndex=1

    processing:         SET           capsBound=leftTip

    processing: 

    processing:         FACE HAS      tagType=tip tagIndex=2

    processing:         SET           capsBound=riteTip

WARNING:: toler =   5.0000e-06 for UDPRIM
                          Body     38 created  (toler= 5.0000e-06, nnode=  63, nedge= 137, nface=  99)
    executing [1310] udprim:     editAttr filename tmp_OpenCSM_00/07 (compiled code)
    processing:         NODE ADJ2FACE tagComp=leftWing tagType=tip

    processing:         AND  ADJ2FACE tagType=lower

    processing:         AND  ADJ2FACE tagType=spar tagIndex=1

    processing:         SET           capsLoad=leftPointLoad

    processing: 

    processing:         NODE ADJ2FACE tagComp=riteWing tagType=tip

    processing:         AND  ADJ2FACE tagType=lower

    processing:         AND  ADJ2FACE tagType=spar tagIndex=1

    processing:         SET           capsLoad=ritePointLoad

WARNING:: toler =   5.0000e-06 for UDPRIM
                          Body     39 created  (toler= 5.0000e-06, nnode=  63, nedge= 137, nface=  99)
    executing [1311] select:   edge  tagType  leadingEdge  *  *  *  *
    executing [1312] dimension:     leadingEdges      1.00000      8.00000
    executing [1313] set:            leadingEdges  @sellist
                          leadingEdges[1,1] =     8.00000     0.00000
                          leadingEdges[1,2] =    31.00000     0.00000
                          leadingEdges[1,3] =    33.00000     0.00000
                          leadingEdges[1,4] =    62.00000     0.00000
                          leadingEdges[1,5] =    64.00000     0.00000
                          leadingEdges[1,6] =    94.00000     0.00000
                          leadingEdges[1,7] =    96.00000     0.00000
                          leadingEdges[1,8] =   121.00000     0.00000
    executing [1314] patbeg:         i      8.00000
                          pattern counter: i =   1
    executing [1315] select:   edge  8
                     putting Branch Attributes on Edge 8
    executing [1316] patend:
                          pattern counter: i =   2
    executing [1315] select:   edge  31
                     putting Branch Attributes on Edge 31
    executing [1316] patend:
                          pattern counter: i =   3
    executing [1315] select:   edge  33
                     putting Branch Attributes on Edge 33
    executing [1316] patend:
                          pattern counter: i =   4
    executing [1315] select:   edge  62
                     putting Branch Attributes on Edge 62
    executing [1316] patend:
                          pattern counter: i =   5
    executing [1315] select:   edge  64
                     putting Branch Attributes on Edge 64
    executing [1316] patend:
                          pattern counter: i =   6
    executing [1315] select:   edge  94
                     putting Branch Attributes on Edge 94
    executing [1316] patend:
                          pattern counter: i =   7
    executing [1315] select:   edge  96
                     putting Branch Attributes on Edge 96
    executing [1316] patend:
                          pattern counter: i =   8
    executing [1315] select:   edge  121
                     putting Branch Attributes on Edge 121
    executing [1316] patend:
    executing [1317] udprim:     editAttr filename tmp_OpenCSM_00/08 (compiled code)
    processing:         FACE ADJ2EDGE tagComp=leftWing

    processing:         SET           tagTemp=leadingEdgeFace

WARNING:: toler =   5.0000e-06 for UDPRIM
                          Body     40 created  (toler= 5.0000e-06, nnode=  63, nedge= 137, nface=  99)
    executing [1318] udprim:     editAttr filename tmp_OpenCSM_00/09 (compiled code)
    processing:         EDGE ADJ2FACE tagTemp=leadingEdgeFace

    processing:         AND  ADJ2FACE tagComp=rootWing

    processing:         SET           capsMesh=rootLeadingEdge

WARNING:: toler =   5.0000e-06 for UDPRIM
                          Body     41 created  (toler= 5.0000e-06, nnode=  63, nedge= 137, nface=  99)
    executing [1319] ifthen:             1.00000  EQ      1.00000  and      0.00000  eq      0.00000
    executing [1320] udprim:     editAttr filename tmp_OpenCSM_00/10 (compiled code)
    processing:             FACE HAS      tagComp=rootWing

    processing:             SET           capsConstraint=rootConstraint

    processing:        

    processing:             EDGE ADJ2FACE tagComp=rootWing

    processing:             SET  capsConstraint=rootConstraint

    processing:     

    processing:             NODE ADJ2FACE tagComp=rootWing

    processing:             SET  capsConstraint=rootConstraint

WARNING:: toler =   5.0000e-06 for UDPRIM
                          Body     42 created  (toler= 5.0000e-06, nnode=  63, nedge= 137, nface=  99)
    executing [1322] ifthen:             0.00000  EQ      1.00000  and  ...
    executing [1325] udprim:     editAttr filename tmp_OpenCSM_00/12 (compiled code)
    processing:         FACE HAS      tagComp=leftWing tagType=upper

    processing:         AND  ADJ2EDGE tagType=leadingEdge

    processing:         AND  ADJ2FACE tagComp=riteWing

    processing:         SET           tagCsys=leftWing

    processing: 

    processing:         FACE HAS      tagComp=riteWing tagType=upper

    processing:         AND  ADJ2EDGE tagType=leadingEdge

    processing:         AND  ADJ2FACE tagComp=leftWing

    processing:         SET           tagCsys=riteWing

WARNING:: toler =   5.0000e-06 for UDPRIM
                          Body     43 created  (toler= 5.0000e-06, nnode=  63, nedge= 137, nface=  99)
    executing [1326] select:   face  tagCsys  leftWing  *  *  *  *
    executing [1327] set:            leftWingSkinCsys  @sellist
                          leftWingSkinCsys =    27.00000     0.00000
    executing [1328] select:   face  tagCsys  riteWing  *  *  *  *
    executing [1329] set:            riteWingSkinCsys  @sellist
                          riteWingSkinCsys =     8.00000     0.00000
    executing [1330] store:      WingStruct      0.00000      0.00000
                          Body     43 stored
    executing [1331] restore:    WingStruct      0.00000
                          Body     44 restored (toler= 5.0000e-06, nnode=  63, nedge= 137, nface=  99)
    executing [1332] store:      WingStruct      0.00000      0.00000
WARNING:: storage WingStruct (0) is being overwritten
                          Body     44 stored
    executing [1334] restore:    WingStruct      0.00000
                          Body     45 restored (toler= 5.0000e-06, nnode=  63, nedge= 137, nface=  99)
    executing [1335] select:   body
                    putting Branch Attributes on Body
    executing [1336] ifthen:             0.00000  EQ      1.00000  and  ...
    executing [1339] end:
    executing [1341] ifthen:             0.00000  NE      0.00000  and  ...
    executing [1378] end:
    finalizing:
==> Profile information
    Branch type           ncall  time (sec)    pct
    dimension                 1       0.001    0.0
    box                       3       0.012    0.1
    udprim                   14       1.034    7.8
    restore                  12       0.147    1.1
    rule                      1       0.151    1.1
    intersect                 4       1.511   11.4
    subtract                  1       2.762   20.8
    union                     1       5.627   42.3
    join                      1       0.145    1.1
    extract                   1       1.494   11.2
    translate                 2       0.040    0.3
    rotatex                   2       0.008    0.1
    rotatey                   1       0.004    0.0
    scale                     2       0.009    0.1
    mirror                    1       0.037    0.3
    interface                 4       0.002    0.0
    end                       4       0.002    0.0
    set                      77       0.094    0.7
    udparg                    3       0.001    0.0
    select                   26       0.137    1.0
    store                     7       0.007    0.1
    patbeg                    2       0.002    0.0
    patend                   11       0.011    0.1
    ifthen                   48       0.049    0.4
    else                      2       0.001    0.0
    endif                    48       0.000    0.0
    catbeg                    1       0.000    0.0
    catend                    1       0.000    0.0
    mark                      2       0.002    0.0
    group                     1       0.001    0.0
    Total                   284      13.291
Mapping capsGroup attributes ................
	Number of unique capsGroup attributes = 7
	Name = Wing, index = 1
	Name = wingSpar1, index = 2
	Name = riteWingSkin, index = 3
	Name = wingRib, index = 4
	Name = leftWingSkin, index = 5
	Name = wingSpar2, index = 6
	Name = wingTE, index = 7
Mapping capsMesh attributes ................
	Number of unique capsMesh attributes = 4
	Name = wingSpar1, index = 1
	Name = wingSpar2, index = 2
	Name = leadingEdge, index = 3
	Name = rootLeadingEdge, index = 4
Getting surface mesh for body 1 (of 4)
	Tessellating body
Warning: No capsGroup/capsIgnore attribute found on edge 1 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 2 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 3 of face 1, unable to assign a boundary index value
Number of nodes = 7
Number of elements = 3
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 0
Number of quadrilateral elements = 3
Getting surface mesh for body 2 (of 4)
	Tessellating body
Warning: No capsGroup/capsIgnore attribute found on edge 1 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 2 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 3 of face 1, unable to assign a boundary index value
Number of nodes = 7
Number of elements = 3
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 0
Number of quadrilateral elements = 3
Getting surface mesh for body 3 (of 4)
	Tessellating body
Warning: No capsGroup/capsIgnore attribute found on edge 1 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 2 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 3 of face 1, unable to assign a boundary index value
Number of nodes = 7
Number of elements = 3
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 0
Number of quadrilateral elements = 3
Getting surface mesh for body 4 (of 4)
	Tessellating body
Number of nodes = 299
Number of elements = 387
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 0
Number of quadrilateral elements = 387
----------------------------
Total number of nodes = 320
Total number of elements = 396
Analysis directory does not currently exist - it will be made automatically
 CAPS Info: No symbol for aimExecute in nastranAIM
 CAPS Info: No symbol for aimCheck in nastranAIM
 CAPS Info: No symbol for aimSensitivity in nastranAIM

==> Running Nastran pre-analysis...
Mapping Csys attributes ................
	Number of unique Csys attributes = 2
	Name = leftWingSkin, index = 1
	Name = riteWingSkin, index = 2

Getting FEA coordinate systems.......
	Number of coordinate systems - 2
	Coordinate system name - leftWingSkin
	Coordinate system name - riteWingSkin
Mapping capsConstraint attributes ................
	Number of unique capsConstraint attributes = 1
	Name = rootConstraint, index = 1
Mapping capsLoad attributes ................
	Number of unique capsLoad attributes = 2
	Name = ritePointLoad, index = 1
	Name = leftPointLoad, index = 2
Mapping capsBound attributes ................
	Number of unique capsBound attributes = 4
	Name = lowerWing, index = 1
	Name = upperWing, index = 2
	Name = riteTip, index = 3
	Name = leftTip, index = 4
Mapping capsConnect attributes ................
	Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
	Number of unique capsResponse attributes = 0
Found link for attrMap (Attribute_Map) from parent
Found link for a Surface mesh from parent
Setting FEA Data
	Mesh for body = 0
	Number of nodal coordinates = 7
	Number of elements = 3
	Elemental Nodes = 0
	Elemental Rods  = 0
	Elemental Tria3 = 0
	Elemental Quad4 = 3
Setting FEA Data
	Mesh for body = 1
	Number of nodal coordinates = 7
	Number of elements = 3
	Elemental Nodes = 0
	Elemental Rods  = 0
	Elemental Tria3 = 0
	Elemental Quad4 = 3
Setting FEA Data
	Mesh for body = 2
	Number of nodal coordinates = 7
	Number of elements = 3
	Elemental Nodes = 0
	Elemental Rods  = 0
	Elemental Tria3 = 0
	Elemental Quad4 = 3
Setting FEA Data
	Mesh for body = 3
	Number of nodal coordinates = 299
	Number of elements = 387
	Elemental Nodes = 0
	Elemental Rods  = 0
	Elemental Tria3 = 0
	Elemental Quad4 = 387
Combining multiple FEA meshes!
	Combined Number of nodal coordinates = 320
	Combined Number of elements = 396
	Combined Elemental Nodes = 0
	Combined Elemental Rods  = 0
	Combined Elemental Tria3 = 0
	Combined Elemental Quad4 = 396
Getting vortex lattice surface data
	VLM surface name - upperWing
	Done getting vortex lattice surface data

Getting FEA vortex lattice mesh
	Surface 1: Number of points found for aero-spline = 12
	Surface 2: Number of points found for aero-spline = 12

Getting FEA materials.......
	Number of materials - 2
	Material name - Unobtainium
	No "materialType" specified for Material tuple Unobtainium, defaulting to "Isotropic"
	Material name - Madeupium
	Done getting FEA materials

Getting FEA properties.......
	Number of properties - 5
	Property name - leftWingSkin
	Property name - riteWingSkin
	Property name - wingRib
	Property name - wingSpar1
	Property name - wingSpar2
	Done getting FEA properties
Updating mesh element types based on properties input

Getting FEA constraints.......
	Number of constraints - 1
	Constraint name - rootConstraint
	No "constraintType" specified for Constraint tuple rootConstraint, defaulting to "ZeroDisplacement"
	Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Load tuple is NULL - No loads applied
Design_Variable tuple is NULL - No design variables applied
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied

Getting FEA analyses.......
	Number of analyses - 1
	Analysis name - Flutter
	Done getting FEA analyses

Writing Nastran grid and connectivity file (in large field format) ....
Finished writing Nastran grid file

Writing subElement types (if any) - appending mesh file

Writing Nastran instruction file....
SUBCASE = 0
	Warning: No loads specified for case Flutter!!!!
	Writing aero card
	Writing analysis cards
	Writing constraint ADD cards
	Writing constraint cards
	Writing material cards
	Writing property cards
	Writing coordinate system cards
	Writing aeroelastic cards

==> Running Nastran...
'nastran' is not recognized as an internal or external command,
operable program or batch file.
--> temporary directory "tmp_OpenCSM_00" removed
 Cleaning up egadsInstance - 0
 Cleaning up nastranInstance - 0
 EGADS Info: 906 Objects, 1436 Reference in Use (of 33673) at Close!

real	0m15.131s
user	0m0.109s
sys	0m0.374s
+ status=0
+ set +x

=================================================
data/session10/nastran_5_Flutter.py passed (as expected)
=================================================


*************************************************
*************************************************

=================================================
Did not run examples for:

session07
=================================================

All tests pass!


C:\Users\jenkins\workspace\ESP_QuickTestCaps\7.4\CAPS\training\WIN64.2017\CAPS\training>set err4=0 

C:\Users\jenkins\workspace\ESP_QuickTestCaps\7.4\CAPS\training\WIN64.2017\CAPS\training>REM Check CAPS training examples 

C:\Users\jenkins\workspace\ESP_QuickTestCaps\7.4\CAPS\training\WIN64.2017\CAPS\training>if training == training2018 mkdir C:\Users\jenkins\workspace\ESP_QuickTestCaps\7.4\CAPS\training\WIN64.2017\ESP\test\training2018   || exit /b 666 

C:\Users\jenkins\workspace\ESP_QuickTestCaps\7.4\CAPS\training\WIN64.2017\CAPS\training>if training == training2018 cd C:\Users\jenkins\workspace\ESP_QuickTestCaps\7.4\CAPS\training\WIN64.2017\ESP\test\training2018   || exit /b 666 

C:\Users\jenkins\workspace\ESP_QuickTestCaps\7.4\CAPS\training\WIN64.2017\CAPS\training>if training == training2018 xcopy C:\Users\jenkins\workspace\ESP_QuickTestCaps\7.4\CAPS\training\WIN64.2017\CAPS\training\2018\data\* /Q /Y   || exit /b 666 

C:\Users\jenkins\workspace\ESP_QuickTestCaps\7.4\CAPS\training\WIN64.2017\CAPS\training>if training == training2018 C:\Users\jenkins\workspace\ESP_QuickTestCaps\7.4\CAPS\training\WIN64.2017\ESP\WIN64\test\template_avl   || set err4=1 

C:\Users\jenkins\workspace\ESP_QuickTestCaps\7.4\CAPS\training\WIN64.2017\CAPS\training>if training == training2018 bash.exe -x -e -c "for i in `ls wing*.csm | sort -f`; do time python runAll.py $i; done"   || set err4=1 

C:\Users\jenkins\workspace\ESP_QuickTestCaps\7.4\CAPS\training\WIN64.2017\CAPS\training>REM Don't run examples because matplotlib actually plots, but nobody is there to close the window 

C:\Users\jenkins\workspace\ESP_QuickTestCaps\7.4\CAPS\training\WIN64.2017\CAPS\training>REM if training==training2018 bash.exe -x -e -c "for i in `ls exercise*.py | sort -f`; do time python $i; done" || set err4=1 

C:\Users\jenkins\workspace\ESP_QuickTestCaps\7.4\CAPS\training\WIN64.2017\CAPS\training>set err1=0 

C:\Users\jenkins\workspace\ESP_QuickTestCaps\7.4\CAPS\training\WIN64.2017\CAPS\training>set err2=0 

C:\Users\jenkins\workspace\ESP_QuickTestCaps\7.4\CAPS\training\WIN64.2017\CAPS\training>set err3=0 

C:\Users\jenkins\workspace\ESP_QuickTestCaps\7.4\CAPS\training\WIN64.2017\CAPS\training>if CAPS == OpenCSM (if NOT training == pyOCSM (
set /p err1= 0<err1_tmp.out  
 set /p err2= 0<err2_tmp.out  
 if "" == "" (set /p err3=  0<err3_tmp.out )  else (set err3=0  ) 
) ) 

C:\Users\jenkins\workspace\ESP_QuickTestCaps\7.4\CAPS\training\WIN64.2017\CAPS\training>echo off 

C:\Users\jenkins\workspace\ESP_QuickTestCaps\7.4\CAPS\training\WIN64.2017\CAPS\training>set /a "err=0+0+0+0" 

C:\Users\jenkins\workspace\ESP_QuickTestCaps\7.4\CAPS\training\WIN64.2017\CAPS\training>exit /b 0 

C:\Users\jenkins\workspace\ESP_QuickTestCaps\7.4\CAPS\training\WIN64.2017\CAPS\aim\skeleton>exit 0 
[GNU C Compiler (gcc)] Sleeping for 5 seconds due to JENKINS-32191...
[GNU C Compiler (gcc)] Parsing console log (workspace: 'C:\Users\jenkins\workspace\ESP_QuickTestCaps\7.4\CAPS\training\WIN64.2017')
[GNU C Compiler (gcc)] Successfully parsed console log
[GNU C Compiler (gcc)] -> found 0 issues (skipped 0 duplicates)
[GNU C Compiler (gcc)] Skipping post processing
[GNU C Compiler (gcc)] No filter has been set, publishing all 0 issues
[GNU C Compiler (gcc)] Repository miner is not configured, skipping mining
[Clang (LLVM based)] Sleeping for 5 seconds due to JENKINS-32191...
[Clang (LLVM based)] Parsing console log (workspace: 'C:\Users\jenkins\workspace\ESP_QuickTestCaps\7.4\CAPS\training\WIN64.2017')
[Clang (LLVM based)] Successfully parsed console log
[Clang (LLVM based)] -> found 0 issues (skipped 0 duplicates)
[Clang (LLVM based)] Skipping post processing
[Clang (LLVM based)] No filter has been set, publishing all 0 issues
[Clang (LLVM based)] Repository miner is not configured, skipping mining
[Static Analysis] Reference build recorder is not configured
[Static Analysis] Obtaining reference build from same job (7.4,WIN64.2017,windows10x64)
[Static Analysis] Using reference build 'ESP_QuickTestCaps/CASREV=7.4,ESP_ARCH=WIN64.2017,buildnode=windows10x64 #23' to compute new, fixed, and outstanding issues
[Static Analysis] Issues delta (vs. reference build): outstanding: 0, new: 0, fixed: 0
[Static Analysis] Evaluating quality gates
[Static Analysis] -> PASSED - Total (any severity): 0 - Quality QualityGate: 1
[Static Analysis] -> All quality gates have been passed
[Static Analysis] Health report is disabled - skipping
[Static Analysis] Created analysis result for 0 issues (found 0 new issues, fixed 0 issues)
[Static Analysis] Attaching ResultAction with ID 'analysis' to build 'ESP_QuickTestCaps/CASREV=7.4,ESP_ARCH=WIN64.2017,buildnode=windows10x64 #24'.
[Checks API] No suitable checks publisher found.
[PostBuildScript] - [INFO] Executing post build scripts.
[PostBuildScript] - [INFO] build step #0 should only be executed on MATRIX
[WS-CLEANUP] Deleting project workspace...
[WS-CLEANUP] done
Finished: SUCCESS