Skip to content
Success

Console Output

Skipping 491 KB.. Full Log
--------------------------- Finalizing Solver ---------------------------
Deleted CNumerics container.
Deleted CIntegration container.
Deleted CSolver container.
Deleted CIteration container.
Deleted CInterface container.
Deleted CGeometry container.
Deleted CFreeFormDefBox class.
Deleted CSurfaceMovement class.
Deleted CVolumetricMovement class.
Deleted CConfig container.
Deleted nInst container.
Deleted COutput class.
-------------------------------------------------------------------------

------------------------- Exit Success (SU2_CFD) ------------------------

Total Force - Pressure + Viscous
Cl =  0.072253 Cd =  -0.01151
Cmz =  0.070975
Cx =  -0.01151 Cy =  0.072253
Pressure Contribution
Cl_p =  0.072253 Cd_p =  -0.01151
Cmz_p =  0.070975
Cx_p =  -0.01151 Cy_p =  0.072253
Viscous Contribution
Cl_v =  0.0 Cd_v =  0.0
Cmz_v =  0.0
Cx_v =  0.0 Cy_v =  0.0

real	0m4.113s
user	0m4.026s
sys	0m1.050s
+ status=0
+ set +x

=================================================
CAPS verification (using pyCAPS) case su2_and_AFLR2_PyTest.py passed (as expected)
=================================================


=================================================
+ echo 'su2_and_AFLR4_AFLR3_PyTest.py test;'
+ tee -a /Users/jenkins/workspace/ESP_UndefinedCaps/7.6/CAPS/CFD/DARWIN64/ESP/DARWIN64/examples/regressionTest/pyCAPSlog.txt
su2_and_AFLR4_AFLR3_PyTest.py test;
+ python -u su2_and_AFLR4_AFLR3_PyTest.py -outLevel=0
+ tee -a /Users/jenkins/workspace/ESP_UndefinedCaps/7.6/CAPS/CFD/DARWIN64/ESP/DARWIN64/examples/regressionTest/pyCAPSlog.txt
Mapping capsGroup attributes ................
	Number of unique capsGroup attributes = 4
	Name = Wing1, index = 1
	Name = Wing2, index = 2
	Name = Wake, index = 3
	Name = Farfield, index = 4
Mapping capsMesh attributes ................
	Number of unique capsMesh attributes = 4
	Name = Wing1, index = 1
	Name = Wing2, index = 2
	Name = Wake, index = 3
	Name = Farfield, index = 4
AFLR4    : Proximity BG Surface Grid Generation Skipped
AFLR4    : No Modifications Required
Warning: No capsGroup/capsIgnore attribute found on edge 1 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 2 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 3 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 4 of face 1, unable to assign a boundary index value

Writing TECPLOT file: AFLR4_Mesh.dat ....
Finished writing TECPLOT file

Mapping capsMesh attributes ................
	Number of unique capsMesh attributes = 4
	Name = Wing1, index = 1
	Name = Wing2, index = 2
	Name = Wake, index = 3
	Name = Farfield, index = 4
Mapping capsGroup attributes ................
	Number of unique capsGroup attributes = 4
	Name = Wing1, index = 1
	Name = Wing2, index = 2
	Name = Wake, index = 3
	Name = Farfield, index = 4
Getting volume mesh
 
AFLR2    : ---------------------------------------
AFLR2    : AFLR2 LIBRARY
AFLR2    : ADVANCING-FRONT/LOCAL-RECONNECTION
AFLR2    : TRIA/QUAD GRID GENERATOR
AFLR2    : Version Number 9.14.7
AFLR2    : Version Date   07/16/23 @ 01:42PM
AFLR2    : Compile OS     Darwin 22.5.0 x86_64
AFLR2    : Compile Date   07/25/23 @ 11:59AM
AFLR2    : Copyright 1994-2021, D.L. Marcum
AFLR2    : ---------------------------------------
 
AFLR4    : ---------------------------------------
AFLR4    : AFLR4 LIBRARY
AFLR4    : ADVANCING-FRONT/LOCAL-RECONNECTION
AFLR4    : TRIA/QUAD SURFACE GRID GENERATOR
AFLR4    : Version Number 11.5.9
AFLR4    : Version Date   08/14/23 @ 12:27AM
AFLR4    : Compile OS     Darwin 22.5.0 x86_64
AFLR4    : Compile Date   08/14/23 @ 01:13PM
AFLR4    : Copyright 1994-2021, D.L. Marcum
AFLR4    : ---------------------------------------

EGADS    : ---------------------------------------
EGADS    : Engineering Geometry Aircraft Design System
EGADS    : Version 1.25
EGADS    : OpenCASCADE Version 7.6.0
EGADS    : ---------------------------------------

EGADS    : ---------------------------------------
EGADS    : Engineering Geometry Aircraft Design System
EGADS    : Version 1.25
EGADS    : OpenCASCADE Version 7.6.0
EGADS    : ---------------------------------------
Volume mesh:
	Number of nodes          = 39312
	Number of elements       = 226864
	Number of triangles      = 12446
	Number of quadrilatarals = 0
	Number of tetrahedrals   = 214418
	Number of pyramids       = 0
	Number of prisms         = 0
	Number of hexahedrals    = 0

Writing TECPLOT file: AFLR3_Mesh.dat ....
Finished writing TECPLOT file


Writing SU2 file ....
Finished writing SU2 file

Getting CFD boundary conditions
	Boundary condition name - Farfield
	Boundary condition name - Wake
	Boundary condition name - Wing1
	Boundary condition name - Wing2
	Done getting CFD boundary conditions
Warning: The su2 cfg file will be overwritten!
Write SU2 configuration file for version "Harrier (8.0.0) "


Running SU2......

-------------------------------------------------------------------------
|    ___ _   _ ___                                                      |
|   / __| | | |_  )   Release 8.0.0 "Harrier"                           |
|   \__ \ |_| |/ /                                                      |
|   |___/\___//___|   Suite (Computational Fluid Dynamics Code)         |
|                                                                       |
-------------------------------------------------------------------------
| SU2 Project Website: https://su2code.github.io                        |
|                                                                       |
| The SU2 Project is maintained by the SU2 Foundation                   |
| (http://su2foundation.org)                                            |
-------------------------------------------------------------------------
| Copyright 2012-2023, SU2 Contributors                                 |
|                                                                       |
| SU2 is free software; you can redistribute it and/or                  |
| modify it under the terms of the GNU Lesser General Public            |
| License as published by the Free Software Foundation; either          |
| version 2.1 of the License, or (at your option) any later version.    |
|                                                                       |
| SU2 is distributed in the hope that it will be useful,                |
| but WITHOUT ANY WARRANTY; without even the implied warranty of        |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU      |
| Lesser General Public License for more details.                       |
|                                                                       |
| You should have received a copy of the GNU Lesser General Public      |
| License along with SU2. If not, see <http://www.gnu.org/licenses/>.   |
-------------------------------------------------------------------------

Parsing config file for zone 0

----------------- Physical Case Definition ( Zone 0 ) -------------------
Compressible Euler equations.
Mach number: 0.5901.
Angle of attack (AoA): 1 deg, and angle of sideslip (AoS): 0 deg.
No restart solution, use the values at infinity (freestream).
Dimensional simulation.
The reference area is 50 m^2.
The semi-span will be computed using the max y(3D) value.
The reference length is 15.8114 m.
Surface(s) where the force coefficients are evaluated and 
their reference origin for moment computation: 
   - BC_1 (0, 0, 0).
   - BC_2 (0, 0, 0) m.
Surface(s) plotted in the output file: BC_1, BC_2.
Input mesh file name: ../aflr3/aflr3_0.su2

--------------- Space Numerical Integration ( Zone 0 ) ------------------
Roe (with entropy fix = 0.001) solver for the flow inviscid terms.
Standard Roe without low-dissipation function.
Second order integration in space, with slope limiter.
Venkatakrishnan slope-limiting method, with constant: 0.05.
The reference element size is: 1. 
Gradient for upwind reconstruction: inverse-distance weighted Least-Squares.
Gradient for viscous and source terms: inverse-distance weighted Least-Squares.

--------------- Time Numerical Integration  ( Zone 0 ) ------------------
Local time stepping (steady state simulation).
Euler implicit method for the flow equations.
FGMRES is used for solving the linear system.
Using a ILU(0) preconditioning.
Convergence criteria of the linear solver: 1e-06.
Max number of linear iterations: 10.
V Multigrid Cycle, with 2 multigrid levels.
Damping factor for the residual restriction: 0.75.
Damping factor for the correction prolongation: 0.75.
No CFL adaptation.
+-------------------------------------------+
|  MG Level| Presmooth|PostSmooth|CorrectSmo|
+-------------------------------------------+
|         0|         1|         0|         0|
|         1|         2|         0|         0|
|         2|         3|         0|         0|
+-------------------------------------------+
Courant-Friedrichs-Lewy number:       10

------------------ Convergence Criteria  ( Zone 0 ) ---------------------
Maximum number of solver subiterations: 10.
Begin convergence monitoring at iteration 5.
Residual minimum value: 1e-8.
Cauchy series min. value: 1e-10.
Number of Cauchy elements: 100.
Begin windowed time average at iteration 0.

-------------------- Output Information ( Zone 0 ) ----------------------
File writing frequency: 
+------------------------------------+
|                     File| Frequency|
+------------------------------------+
|                  RESTART|       250|
|              SURFACE_CSV|       250|
|                 PARAVIEW|       250|
|         SURFACE_PARAVIEW|       250|
+------------------------------------+
Writing the convergence history file every 1 inner iterations.
Writing the screen convergence history every 1 inner iterations.
The tabular file format is CSV (.csv).
Convergence history file name: history.
Forces breakdown file name: forces_breakdown_su2AFLRTest.dat.
Surface file name: surface_flow_su2AFLRTest.
Volume file name: flow_su2AFLRTest.
Restart file name: restart_flow_su2AFLRTest.dat.

------------- Config File Boundary Information ( Zone 0 ) ---------------
+-----------------------------------------------------------------------+
|                        Marker Type|                        Marker Name|
+-----------------------------------------------------------------------+
|                         Euler wall|                               BC_1|
|                                   |                               BC_2|
+-----------------------------------------------------------------------+
|                          Far-field|                               BC_4|
+-----------------------------------------------------------------------+
|                  Internal boundary|                               BC_3|
+-----------------------------------------------------------------------+

-------------------- Output Preprocessing ( Zone 0 ) --------------------

WARNING: SURFACE_PRESSURE_DROP can only be computed for at least 2 surfaces (outlet, inlet, ...)

Screen output fields: TIME_ITER, OUTER_ITER, INNER_ITER, CUR_TIME, TIME_STEP, WALL_TIME, RMS_DENSITY, RMS_MOMENTUM-X, RMS_MOMENTUM-Y, RMS_ENERGY, EFFICIENCY
History output group(s): ITER, TIME_DOMAIN, WALL_TIME, RMS_RES, AERO_COEFF
Convergence field(s): RMS_DENSITY
Warning: No (valid) fields chosen for time convergence monitoring. Time convergence monitoring inactive.
Volume output fields: COORDINATES, SOLUTION, PRIMITIVE

------------------- Geometry Preprocessing ( Zone 0 ) -------------------
Three dimensional problem.
39312 grid points.
214418 volume elements.
4 surface markers.
6594 boundary elements in index 0 (Marker = BC_1).
5358 boundary elements in index 1 (Marker = BC_2).
74 boundary elements in index 2 (Marker = BC_3).
420 boundary elements in index 3 (Marker = BC_4).
214418 tetrahedra.
Setting point connectivity.
Renumbering points (Reverse Cuthill McKee Ordering).
Recomputing point connectivity.
Setting element connectivity.
Checking the numerical grid orientation.
All volume elements are correctly orientend.
All surface elements are correctly orientend.
Identifying edges and vertices.
Setting the control volume structure.
Volume of the computational grid: 2.08667e+06.
Searching for the closest normal neighbors to the surfaces.
Storing a mapping from global to local point index.
Compute the surface curvature.
Max K: 4873.1. Mean K: 61.8682. Standard deviation K: 266.942.
Checking for periodicity.
Computing mesh quality statistics for the dual control volumes.
+--------------------------------------------------------------+
|           Mesh Quality Metric|        Minimum|        Maximum|
+--------------------------------------------------------------+
|    Orthogonality Angle (deg.)|        17.1608|         84.739|
|     CV Face Area Aspect Ratio|        1.11815|        37015.5|
|           CV Sub-Volume Ratio|        1.04044|         455686|
+--------------------------------------------------------------+
Setting the multigrid structure.
+-------------------------------------------+
|  MG Level|       CVs|Aggl. Rate|       CFL|
+-------------------------------------------+
|         0|     39312|    1/1.00|        10|
|         1|      6485|    1/6.06|   8.22658|
|         2|      1015|    1/6.39|   6.65012|
+-------------------------------------------+
Finding max control volume width.
Semi-span length = 7.90569 m.
Wetted area = 118.038 m^2.
Area projection in the x-plane = 11.1419 m^2, y-plane = 4.96714 m^2, z-plane = 55.4182 m^2.
Max. coordinate in the x-direction = 12.6407 m, y-direction = 7.90569 m, z-direction = 0.582636 m.
Min. coordinate in the x-direction = 0 m, y-direction = -7.90569 m, z-direction = -0.41192 m.
Checking if Euler & Symmetry markers are straight/plane:
Boundary marker BC_1 is NOT a single plane.
Boundary marker BC_2 is NOT a single plane.
Computing wall distances.

-------------------- Solver Preprocessing ( Zone 0 ) --------------------
Inviscid flow: Computing density based on free-stream
temperature and pressure using the ideal gas law.
Force coefficients computed using free-stream values.

-- Models:
+------------------------------------------------------------------------------+
|          Viscosity Model|        Conductivity Model|              Fluid Model|
+------------------------------------------------------------------------------+
|                        -|                         -|             STANDARD_AIR|
+------------------------------------------------------------------------------+
-- Fluid properties:
+------------------------------------------------------------------------------+
|                  Name|    Dim. value|    Ref. value|      Unit|Non-dim. value|
+------------------------------------------------------------------------------+
|          Gas Constant|       287.058|             1|  N.m/kg.K|       287.058|
|      Spec. Heat Ratio|             -|             -|         -|           1.4|
+------------------------------------------------------------------------------+
-- Initial and free-stream conditions:
+------------------------------------------------------------------------------+
|                  Name|    Dim. value|    Ref. value|      Unit|Non-dim. value|
+------------------------------------------------------------------------------+
|       Static Pressure|        101325|             1|        Pa|        101325|
|               Density|       1.22498|             1|    kg/m^3|       1.22498|
|           Temperature|        288.15|             1|         K|        288.15|
|          Total Energy|        226952|             1|   m^2/s^2|        226952|
|            Velocity-X|       200.779|             1|       m/s|       200.779|
|            Velocity-Y|             0|             1|       m/s|             0|
|            Velocity-Z|       3.50461|             1|       m/s|       3.50461|
|    Velocity Magnitude|       200.809|             1|       m/s|       200.809|
+------------------------------------------------------------------------------+
|           Mach Number|             -|             -|         -|        0.5901|
+------------------------------------------------------------------------------+
Initialize Jacobian structure (Euler). MG level: 0.
Initialize Jacobian structure (Euler). MG level: 1.
Initialize Jacobian structure (Euler). MG level: 2.

------------------- Numerics Preprocessing ( Zone 0 ) -------------------

----------------- Integration Preprocessing ( Zone 0 ) ------------------

------------------- Iteration Preprocessing ( Zone 0 ) ------------------
Euler/Navier-Stokes/RANS fluid iteration.

------------------------------ Begin Solver -----------------------------

Simulation Run using the Single-zone Driver
WARNING: SU2 was not compiled for an AVX-capable architecture. Performance could be better,
         see https://su2code.github.io/docs_v7/Build-SU2-Linux-MacOS/#compiler-optimizations
WARNING: SU2 was not compiled for an AVX-capable architecture. Performance could be better,
         see https://su2code.github.io/docs_v7/Build-SU2-Linux-MacOS/#compiler-optimizations
WARNING: SU2 was not compiled for an AVX-capable architecture. Performance could be better,
         see https://su2code.github.io/docs_v7/Build-SU2-Linux-MacOS/#compiler-optimizations
+----------------------------------------------------------------------------------------------------------------------------------------------+
|   Time_Iter|  Outer_Iter|  Inner_Iter|    Cur_Time|   Time_Step|   Time(sec)|    rms[Rho]|   rms[RhoU]|   rms[RhoV]|   rms[RhoE]|        CEff|
+----------------------------------------------------------------------------------------------------------------------------------------------+
|           0|           0|           0|  0.0000e+00|  0.0000e+00|  1.0844e+00|   -0.064586|    2.297676|    2.033300|    5.426310|    1.967108|
|           0|           0|           1|  0.0000e+00|  0.0000e+00|  1.0495e+00|   -0.028142|    2.443813|    2.177084|    5.469820|    2.669025|
|           0|           0|           2|  0.0000e+00|  0.0000e+00|  1.0152e+00|    0.006388|    2.521945|    2.416533|    5.497519|    4.072698|
|           0|           0|           3|  0.0000e+00|  0.0000e+00|  1.0020e+00|   -0.032771|    2.543134|    2.541766|    5.444377|    5.959388|
|           0|           0|           4|  0.0000e+00|  0.0000e+00|  9.8516e-01|   -0.059484|    2.561671|    2.593774|    5.414288|    7.593451|
|           0|           0|           5|  0.0000e+00|  0.0000e+00|  9.7135e-01|   -0.076814|    2.565225|    2.615896|    5.407625|    8.782803|
|           0|           0|           6|  0.0000e+00|  0.0000e+00|  9.6701e-01|   -0.111978|    2.544207|    2.636258|    5.381265|    9.653546|
|           0|           0|           7|  0.0000e+00|  0.0000e+00|  9.6568e-01|   -0.156369|    2.495539|    2.651467|    5.333878|   10.185394|
|           0|           0|           8|  0.0000e+00|  0.0000e+00|  9.6448e-01|   -0.203072|    2.428150|    2.650114|    5.275471|   10.322264|
|           0|           0|           9|  0.0000e+00|  0.0000e+00|  9.6873e-01|   -0.251896|    2.375012|    2.624886|    5.221589|   10.161308|

----------------------------- Solver Exit -------------------------------

Maximum number of iterations reached (ITER = 10) before convergence.
+-----------------------------------------------------------------------+
|      Convergence Field     |     Value    |   Criterion  |  Converged |
+-----------------------------------------------------------------------+
|                    rms[Rho]|     -0.251896|          < -8|          No|
+-----------------------------------------------------------------------+
-------------------------------------------------------------------------
+-----------------------------------------------------------------------+
|        File Writing Summary       |              Filename             |
+-----------------------------------------------------------------------+
|SU2 binary restart                 |restart_flow_su2AFLRTest.dat       |

Writing the forces breakdown file (forces_breakdown_su2AFLRTest.dat).
|CSV file                           |surface_flow_su2AFLRTest.csv       |

Writing the forces breakdown file (forces_breakdown_su2AFLRTest.dat).
|Paraview                           |flow_su2AFLRTest.vtu               |

Writing the forces breakdown file (forces_breakdown_su2AFLRTest.dat).
|Paraview surface                   |surface_flow_su2AFLRTest.vtu       |

Writing the forces breakdown file (forces_breakdown_su2AFLRTest.dat).
+-----------------------------------------------------------------------+

--------------------------- Finalizing Solver ---------------------------
Deleted CNumerics container.
Deleted CIntegration container.
Deleted CSolver container.
Deleted CIteration container.
Deleted CInterface container.
Deleted CGeometry container.
Deleted CFreeFormDefBox class.
Deleted CSurfaceMovement class.
Deleted CVolumetricMovement class.
Deleted CConfig container.
Deleted nInst container.
Deleted COutput class.
-------------------------------------------------------------------------

------------------------- Exit Success (SU2_CFD) ------------------------

Total Force - Pressure + Viscous
Cl =  0.796713 Cd =  0.078407
Cmx =  0.000211 Cmy =  -0.204659 Cmz =  0.000288
Cx =  0.06449 Cy =  0.000454 Cz =  0.79796
Pressure Contribution
Cl_p =  0.796713 Cd_p =  0.078407
Cmx_p =  0.000211 Cmy_p =  -0.204659 Cmz_p =  0.000288
Cx_p =  0.06449 Cy_p =  0.000454 Cz_p =  0.79796
Viscous Contribution
Cl_v =  0.0 Cd_v =  0.0
Cmx_v =  0.0 Cmy_v =  0.0 Cmz_v =  0.0
Cx_v =  0.0 Cy_v =  0.0 Cz_v =  0.0

real	0m37.874s
user	0m35.951s
sys	0m1.347s
+ status=0
+ set +x

=================================================
CAPS verification (using pyCAPS) case su2_and_AFLR4_AFLR3_PyTest.py passed (as expected)
=================================================


=================================================
+ echo 'su2_Morph_PyTest.py test;'
+ tee -a /Users/jenkins/workspace/ESP_UndefinedCaps/7.6/CAPS/CFD/DARWIN64/ESP/DARWIN64/examples/regressionTest/pyCAPSlog.txt
su2_Morph_PyTest.py test;
+ python -u su2_Morph_PyTest.py -outLevel=0
+ tee -a /Users/jenkins/workspace/ESP_UndefinedCaps/7.6/CAPS/CFD/DARWIN64/ESP/DARWIN64/examples/regressionTest/pyCAPSlog.txt
Mapping capsGroup attributes ................
	Number of unique capsGroup attributes = 4
	Name = Wing1, index = 1
	Name = Wing2, index = 2
	Name = Wake, index = 3
	Name = Farfield, index = 4
Mapping capsMesh attributes ................
	Number of unique capsMesh attributes = 4
	Name = Wing1, index = 1
	Name = Wing2, index = 2
	Name = Wake, index = 3
	Name = Farfield, index = 4
AFLR4    : Proximity BG Surface Grid Generation Skipped
AFLR4    : No Modifications Required
Warning: No capsGroup/capsIgnore attribute found on edge 1 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 2 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 3 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 4 of face 1, unable to assign a boundary index value

Writing TECPLOT file: pyCAPS_AFLR4_AFLR3.dat ....
Finished writing TECPLOT file

Mapping capsMesh attributes ................
	Number of unique capsMesh attributes = 4
	Name = Wing1, index = 1
	Name = Wing2, index = 2
	Name = Wake, index = 3
	Name = Farfield, index = 4
Mapping capsGroup attributes ................
	Number of unique capsGroup attributes = 4
	Name = Wing1, index = 1
	Name = Wing2, index = 2
	Name = Wake, index = 3
	Name = Farfield, index = 4
Getting volume mesh
 
AFLR2    : ---------------------------------------
AFLR2    : AFLR2 LIBRARY
AFLR2    : ADVANCING-FRONT/LOCAL-RECONNECTION
AFLR2    : TRIA/QUAD GRID GENERATOR
AFLR2    : Version Number 9.14.7
AFLR2    : Version Date   07/16/23 @ 01:42PM
AFLR2    : Compile OS     Darwin 22.5.0 x86_64
AFLR2    : Compile Date   07/25/23 @ 11:59AM
AFLR2    : Copyright 1994-2021, D.L. Marcum
AFLR2    : ---------------------------------------
 
AFLR4    : ---------------------------------------
AFLR4    : AFLR4 LIBRARY
AFLR4    : ADVANCING-FRONT/LOCAL-RECONNECTION
AFLR4    : TRIA/QUAD SURFACE GRID GENERATOR
AFLR4    : Version Number 11.5.9
AFLR4    : Version Date   08/14/23 @ 12:27AM
AFLR4    : Compile OS     Darwin 22.5.0 x86_64
AFLR4    : Compile Date   08/14/23 @ 01:13PM
AFLR4    : Copyright 1994-2021, D.L. Marcum
AFLR4    : ---------------------------------------

EGADS    : ---------------------------------------
EGADS    : Engineering Geometry Aircraft Design System
EGADS    : Version 1.25
EGADS    : OpenCASCADE Version 7.6.0
EGADS    : ---------------------------------------

EGADS    : ---------------------------------------
EGADS    : Engineering Geometry Aircraft Design System
EGADS    : Version 1.25
EGADS    : OpenCASCADE Version 7.6.0
EGADS    : ---------------------------------------
Volume mesh:
	Number of nodes          = 56062
	Number of elements       = 324627
	Number of triangles      = 15872
	Number of quadrilatarals = 0
	Number of tetrahedrals   = 308755
	Number of pyramids       = 0
	Number of prisms         = 0
	Number of hexahedrals    = 0

Writing TECPLOT file: pyCAPS_AFLR4_AFLR3_VolMesh.dat ....
Finished writing TECPLOT file


Writing SU2 file ....
Finished writing SU2 file

Getting CFD boundary conditions
	Boundary condition name - Farfield
	Boundary condition name - Wake
	Boundary condition name - Wing1
	Boundary condition name - Wing2
	Done getting CFD boundary conditions
Writing SU2 surface file
Writing SU2 Motion File - su2AFLRTest_motion.dat
Writing boundary flags
 - bcProps.surfaceProp[0].surfaceType = 3
 - bcProps.surfaceProp[1].surfaceType = 15
 - bcProps.surfaceProp[2].surfaceType = 1
 - bcProps.surfaceProp[3].surfaceType = 1
Done boundary flags
Warning: The su2 cfg file will be overwritten!
Write SU2 configuration file for version "Harrier (8.0.0) "


Running SU2......

-------------------------------------------------------------------------
|    ___ _   _ ___                                                      |
|   / __| | | |_  )   Release 8.0.0 "Harrier"                           |
|   \__ \ |_| |/ /                                                      |
|   |___/\___//___|   Suite (Computational Fluid Dynamics Code)         |
|                                                                       |
-------------------------------------------------------------------------
| SU2 Project Website: https://su2code.github.io                        |
|                                                                       |
| The SU2 Project is maintained by the SU2 Foundation                   |
| (http://su2foundation.org)                                            |
-------------------------------------------------------------------------
| Copyright 2012-2023, SU2 Contributors                                 |
|                                                                       |
| SU2 is free software; you can redistribute it and/or                  |
| modify it under the terms of the GNU Lesser General Public            |
| License as published by the Free Software Foundation; either          |
| version 2.1 of the License, or (at your option) any later version.    |
|                                                                       |
| SU2 is distributed in the hope that it will be useful,                |
| but WITHOUT ANY WARRANTY; without even the implied warranty of        |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU      |
| Lesser General Public License for more details.                       |
|                                                                       |
| You should have received a copy of the GNU Lesser General Public      |
| License along with SU2. If not, see <http://www.gnu.org/licenses/>.   |
-------------------------------------------------------------------------

Parsing config file for zone 0

----------------- Physical Case Definition ( Zone 0 ) -------------------
Compressible Euler equations.
Mach number: 0.5901.
Angle of attack (AoA): 1 deg, and angle of sideslip (AoS): 0 deg.
No restart solution, use the values at infinity (freestream).
Dimensional simulation.
The reference area is 40 m^2.
The semi-span will be computed using the max y(3D) value.
The reference length is 14.1421 m.
Surface(s) where the force coefficients are evaluated and 
their reference origin for moment computation: 
   - BC_1 (0, 0, 0).
   - BC_2 (0, 0, 0) m.
Surface(s) plotted in the output file: BC_1, BC_2.
Surface(s) affected by the design variables: BC_1, BC_2.
Input mesh file name: ../volumeMesh/aflr3_0.su2

--------------- Space Numerical Integration ( Zone 0 ) ------------------
Roe (with entropy fix = 0.001) solver for the flow inviscid terms.
Standard Roe without low-dissipation function.
Second order integration in space, with slope limiter.
Venkatakrishnan slope-limiting method, with constant: 0.05.
The reference element size is: 1. 
Gradient for upwind reconstruction: inverse-distance weighted Least-Squares.
Gradient for viscous and source terms: inverse-distance weighted Least-Squares.

--------------- Time Numerical Integration  ( Zone 0 ) ------------------
Local time stepping (steady state simulation).
Euler implicit method for the flow equations.
FGMRES is used for solving the linear system.
Using a ILU(0) preconditioning.
Convergence criteria of the linear solver: 1e-06.
Max number of linear iterations: 10.
V Multigrid Cycle, with 2 multigrid levels.
Damping factor for the residual restriction: 0.75.
Damping factor for the correction prolongation: 0.75.
No CFL adaptation.
+-------------------------------------------+
|  MG Level| Presmooth|PostSmooth|CorrectSmo|
+-------------------------------------------+
|         0|         1|         0|         0|
|         1|         2|         0|         0|
|         2|         3|         0|         0|
+-------------------------------------------+
Courant-Friedrichs-Lewy number:       10

------------------ Convergence Criteria  ( Zone 0 ) ---------------------
Maximum number of solver subiterations: 10.
Begin convergence monitoring at iteration 5.
Residual minimum value: 1e-8.
Cauchy series min. value: 1e-10.
Number of Cauchy elements: 100.
Begin windowed time average at iteration 0.

-------------------- Output Information ( Zone 0 ) ----------------------
File writing frequency: 
+------------------------------------+
|                     File| Frequency|
+------------------------------------+
|                  RESTART|       250|
|              SURFACE_CSV|       250|
|                 PARAVIEW|       250|
|         SURFACE_PARAVIEW|       250|
+------------------------------------+
Writing the convergence history file every 1 inner iterations.
Writing the screen convergence history every 1 inner iterations.
The tabular file format is CSV (.csv).
Convergence history file name: history.
Forces breakdown file name: forces_breakdown_su2AFLRTest.dat.
Surface file name: surface_flow_su2AFLRTest.
Volume file name: flow_su2AFLRTest.
Restart file name: restart_flow_su2AFLRTest.dat.

------------- Config File Boundary Information ( Zone 0 ) ---------------
+-----------------------------------------------------------------------+
|                        Marker Type|                        Marker Name|
+-----------------------------------------------------------------------+
|                         Euler wall|                               BC_1|
|                                   |                               BC_2|
+-----------------------------------------------------------------------+
|                          Far-field|                               BC_4|
+-----------------------------------------------------------------------+
|                  Internal boundary|                               BC_3|
+-----------------------------------------------------------------------+

-------------------- Output Preprocessing ( Zone 0 ) --------------------

WARNING: SURFACE_PRESSURE_DROP can only be computed for at least 2 surfaces (outlet, inlet, ...)

Screen output fields: TIME_ITER, OUTER_ITER, INNER_ITER, CUR_TIME, TIME_STEP, WALL_TIME, RMS_DENSITY, RMS_MOMENTUM-X, RMS_MOMENTUM-Y, RMS_ENERGY, EFFICIENCY
History output group(s): ITER, TIME_DOMAIN, WALL_TIME, RMS_RES, AERO_COEFF
Convergence field(s): RMS_DENSITY
Warning: No (valid) fields chosen for time convergence monitoring. Time convergence monitoring inactive.
Volume output fields: COORDINATES, SOLUTION, PRIMITIVE

------------------- Geometry Preprocessing ( Zone 0 ) -------------------
Three dimensional problem.
56062 grid points.
308755 volume elements.
4 surface markers.
9958 boundary elements in index 0 (Marker = BC_1).
5414 boundary elements in index 1 (Marker = BC_2).
80 boundary elements in index 2 (Marker = BC_3).
420 boundary elements in index 3 (Marker = BC_4).
308755 tetrahedra.
Setting point connectivity.
Renumbering points (Reverse Cuthill McKee Ordering).
Recomputing point connectivity.
Setting element connectivity.
Checking the numerical grid orientation.
All volume elements are correctly orientend.
All surface elements are correctly orientend.
Identifying edges and vertices.
Setting the control volume structure.
Volume of the computational grid: 2.08667e+06.
Searching for the closest normal neighbors to the surfaces.
Storing a mapping from global to local point index.
Compute the surface curvature.
Max K: 5523.74. Mean K: 58.8177. Standard deviation K: 282.533.
Checking for periodicity.
Computing mesh quality statistics for the dual control volumes.
+--------------------------------------------------------------+
|           Mesh Quality Metric|        Minimum|        Maximum|
+--------------------------------------------------------------+
|    Orthogonality Angle (deg.)|        25.8353|        86.1799|
|     CV Face Area Aspect Ratio|        1.02126|        47603.8|
|           CV Sub-Volume Ratio|        1.04989|         165826|
+--------------------------------------------------------------+
Setting the multigrid structure.
+-------------------------------------------+
|  MG Level|       CVs|Aggl. Rate|       CFL|
+-------------------------------------------+
|         0|     56062|    1/1.00|        10|
|         1|      9228|    1/6.08|   8.22061|
|         2|      1406|    1/6.56|     6.586|
+-------------------------------------------+
Finding max control volume width.
Semi-span length = 7.07107 m.
Wetted area = 96.2324 m^2.
Area projection in the x-plane = 7.65774 m^2, y-plane = 4.21853 m^2, z-plane = 45.5887 m^2.
Max. coordinate in the x-direction = 12.3872 m, y-direction = 7.07107 m, z-direction = 0.521791 m.
Min. coordinate in the x-direction = 0 m, y-direction = -7.07107 m, z-direction = -0.0650201 m.
Checking if Euler & Symmetry markers are straight/plane:
Boundary marker BC_1 is NOT a single plane.
Boundary marker BC_2 is NOT a single plane.
Computing wall distances.

-------------------- Solver Preprocessing ( Zone 0 ) --------------------
Inviscid flow: Computing density based on free-stream
temperature and pressure using the ideal gas law.
Force coefficients computed using free-stream values.

-- Models:
+------------------------------------------------------------------------------+
|          Viscosity Model|        Conductivity Model|              Fluid Model|
+------------------------------------------------------------------------------+
|                        -|                         -|             STANDARD_AIR|
+------------------------------------------------------------------------------+
-- Fluid properties:
+------------------------------------------------------------------------------+
|                  Name|    Dim. value|    Ref. value|      Unit|Non-dim. value|
+------------------------------------------------------------------------------+
|          Gas Constant|       287.058|             1|  N.m/kg.K|       287.058|
|      Spec. Heat Ratio|             -|             -|         -|           1.4|
+------------------------------------------------------------------------------+
-- Initial and free-stream conditions:
+------------------------------------------------------------------------------+
|                  Name|    Dim. value|    Ref. value|      Unit|Non-dim. value|
+------------------------------------------------------------------------------+
|       Static Pressure|        101325|             1|        Pa|        101325|
|               Density|       1.22498|             1|    kg/m^3|       1.22498|
|           Temperature|        288.15|             1|         K|        288.15|
|          Total Energy|        226952|             1|   m^2/s^2|        226952|
|            Velocity-X|       200.779|             1|       m/s|       200.779|
|            Velocity-Y|             0|             1|       m/s|             0|
|            Velocity-Z|       3.50461|             1|       m/s|       3.50461|
|    Velocity Magnitude|       200.809|             1|       m/s|       200.809|
+------------------------------------------------------------------------------+
|           Mach Number|             -|             -|         -|        0.5901|
+------------------------------------------------------------------------------+
Initialize Jacobian structure (Euler). MG level: 0.
Initialize Jacobian structure (Euler). MG level: 1.
Initialize Jacobian structure (Euler). MG level: 2.

------------------- Numerics Preprocessing ( Zone 0 ) -------------------

----------------- Integration Preprocessing ( Zone 0 ) ------------------

------------------- Iteration Preprocessing ( Zone 0 ) ------------------
Euler/Navier-Stokes/RANS fluid iteration.

------------------------------ Begin Solver -----------------------------

Simulation Run using the Single-zone Driver
WARNING: SU2 was not compiled for an AVX-capable architecture. Performance could be better,
         see https://su2code.github.io/docs_v7/Build-SU2-Linux-MacOS/#compiler-optimizations
WARNING: SU2 was not compiled for an AVX-capable architecture. Performance could be better,
         see https://su2code.github.io/docs_v7/Build-SU2-Linux-MacOS/#compiler-optimizations
WARNING: SU2 was not compiled for an AVX-capable architecture. Performance could be better,
         see https://su2code.github.io/docs_v7/Build-SU2-Linux-MacOS/#compiler-optimizations
+----------------------------------------------------------------------------------------------------------------------------------------------+
|   Time_Iter|  Outer_Iter|  Inner_Iter|    Cur_Time|   Time_Step|   Time(sec)|    rms[Rho]|   rms[RhoU]|   rms[RhoV]|   rms[RhoE]|        CEff|
+----------------------------------------------------------------------------------------------------------------------------------------------+
|           0|           0|           0|  0.0000e+00|  0.0000e+00|  1.5699e+00|   -0.457870|    1.873279|    1.656710|    5.033025|    0.755651|
|           0|           0|           1|  0.0000e+00|  0.0000e+00|  1.5478e+00|   -0.472284|    2.010746|    1.748231|    5.024932|    1.425370|
|           0|           0|           2|  0.0000e+00|  0.0000e+00|  1.5464e+00|   -0.414217|    2.107665|    1.963200|    5.074925|    3.245288|
|           0|           0|           3|  0.0000e+00|  0.0000e+00|  1.6171e+00|   -0.400337|    2.167522|    2.099318|    5.078948|    7.034217|
|           0|           0|           4|  0.0000e+00|  0.0000e+00|  1.5925e+00|   -0.401529|    2.203755|    2.175567|    5.071313|   12.883621|
|           0|           0|           5|  0.0000e+00|  0.0000e+00|  1.5791e+00|   -0.407291|    2.221380|    2.217144|    5.067540|   20.159074|
|           0|           0|           6|  0.0000e+00|  0.0000e+00|  1.5917e+00|   -0.411436|    2.211548|    2.246056|    5.067163|   27.796880|
|           0|           0|           7|  0.0000e+00|  0.0000e+00|  1.5910e+00|   -0.418757|    2.160924|    2.267618|    5.055632|   32.034412|
|           0|           0|           8|  0.0000e+00|  0.0000e+00|  1.5772e+00|   -0.438528|    2.092229|    2.272883|    5.027335|   30.335774|
|           0|           0|           9|  0.0000e+00|  0.0000e+00|  1.5599e+00|   -0.487870|    2.016953|    2.255847|    4.971131|   25.705102|

----------------------------- Solver Exit -------------------------------

Maximum number of iterations reached (ITER = 10) before convergence.
+-----------------------------------------------------------------------+
|      Convergence Field     |     Value    |   Criterion  |  Converged |
+-----------------------------------------------------------------------+
|                    rms[Rho]|      -0.48787|          < -8|          No|
+-----------------------------------------------------------------------+
-------------------------------------------------------------------------
+-----------------------------------------------------------------------+
|        File Writing Summary       |              Filename             |
+-----------------------------------------------------------------------+
|SU2 binary restart                 |restart_flow_su2AFLRTest.dat       |

Writing the forces breakdown file (forces_breakdown_su2AFLRTest.dat).
|CSV file                           |surface_flow_su2AFLRTest.csv       |

Writing the forces breakdown file (forces_breakdown_su2AFLRTest.dat).
|Paraview                           |flow_su2AFLRTest.vtu               |

Writing the forces breakdown file (forces_breakdown_su2AFLRTest.dat).
|Paraview surface                   |surface_flow_su2AFLRTest.vtu       |

Writing the forces breakdown file (forces_breakdown_su2AFLRTest.dat).
+-----------------------------------------------------------------------+

--------------------------- Finalizing Solver ---------------------------
Deleted CNumerics container.
Deleted CIntegration container.
Deleted CSolver container.
Deleted CIteration container.
Deleted CInterface container.
Deleted CGeometry container.
Deleted CFreeFormDefBox class.
Deleted CSurfaceMovement class.
Deleted CVolumetricMovement class.
Deleted CConfig container.
Deleted nInst container.
Deleted COutput class.
-------------------------------------------------------------------------

------------------------- Exit Success (SU2_CFD) ------------------------

Total Force - Pressure + Viscous
Cl =  0.52174 Cd =  0.020297
Projecting tessellation 1 (of 4) on to new body
Projecting tessellation 2 (of 4) on to new body
Projecting tessellation 3 (of 4) on to new body
Projecting tessellation 4 (of 4) on to new body
Getting CFD boundary conditions
	Boundary condition name - Farfield
	Boundary condition name - Wake
	Boundary condition name - Wing1
	Boundary condition name - Wing2
	Done getting CFD boundary conditions
Writing SU2 surface file
Writing SU2 Motion File - su2AFLRTest_motion.dat
Writing boundary flags
 - bcProps.surfaceProp[0].surfaceType = 3
 - bcProps.surfaceProp[1].surfaceType = 15
 - bcProps.surfaceProp[2].surfaceType = 1
 - bcProps.surfaceProp[3].surfaceType = 1
Done boundary flags
Warning: The su2 cfg file will be overwritten!
Write SU2 configuration file for version "Harrier (8.0.0) "


Mesh Morphing......

-------------------------------------------------------------------------
|    ___ _   _ ___                                                      |
|   / __| | | |_  )   Release 8.0.0 "Harrier"                           |
|   \__ \ |_| |/ /                                                      |
|   |___/\___//___|   Suite (Mesh Deformation Code)                     |
|                                                                       |
-------------------------------------------------------------------------
| SU2 Project Website: https://su2code.github.io                        |
|                                                                       |
| The SU2 Project is maintained by the SU2 Foundation                   |
| (http://su2foundation.org)                                            |
-------------------------------------------------------------------------
| Copyright 2012-2023, SU2 Contributors                                 |
|                                                                       |
| SU2 is free software; you can redistribute it and/or                  |
| modify it under the terms of the GNU Lesser General Public            |
| License as published by the Free Software Foundation; either          |
| version 2.1 of the License, or (at your option) any later version.    |
|                                                                       |
| SU2 is distributed in the hope that it will be useful,                |
| but WITHOUT ANY WARRANTY; without even the implied warranty of        |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU      |
| Lesser General Public License for more details.                       |
|                                                                       |
| You should have received a copy of the GNU Lesser General Public      |
| License along with SU2. If not, see <http://www.gnu.org/licenses/>.   |
-------------------------------------------------------------------------

----------------- Physical Case Definition ( Zone 0 ) -------------------
Input mesh file name: aflr3_0.su2

---------------- Grid deformation parameters ( Zone 0 )  ----------------
Grid deformation using a linear elasticity method.


-------------------- Output Information ( Zone 0 ) ----------------------
Output mesh file name: aflr3_0.su2. 
Cell stiffness scaled by distance to nearest solid surface.

------------- Config File Boundary Information ( Zone 0 ) ---------------
+-----------------------------------------------------------------------+
|                        Marker Type|                        Marker Name|
+-----------------------------------------------------------------------+
|                         Euler wall|                               BC_1|
|                                   |                               BC_2|
+-----------------------------------------------------------------------+
|                          Far-field|                               BC_4|
+-----------------------------------------------------------------------+
|                  Internal boundary|                               BC_3|
+-----------------------------------------------------------------------+
Three dimensional problem.
56062 grid points.
308755 volume elements.
4 surface markers.
9958 boundary elements in index 0 (Marker = BC_1).
5414 boundary elements in index 1 (Marker = BC_2).
80 boundary elements in index 2 (Marker = BC_3).
420 boundary elements in index 3 (Marker = BC_4).
308755 tetrahedra.

----------------------- Preprocessing computations ----------------------
Setting local point connectivity.
Checking the numerical grid orientation of the interior elements.
All volume elements are correctly orientend.
All surface elements are correctly orientend.
Identify edges and vertices.
Setting the bound control volume structure.
Volume of the computational grid: 2.08667e+06.
  Info: Ignoring the following volume output fields/groups:
  SOLUTION
Volume output fields: COORDINATES
  Info: Ignoring the following screen output fields:
  RMS_DENSITY, RMS_MOMENTUM-X, RMS_MOMENTUM-Y, RMS_ENERGY, EFFICIENCY
Screen output fields: TIME_ITER, OUTER_ITER, INNER_ITER, CUR_TIME, TIME_STEP, WALL_TIME
  Info: Ignoring the following history output groups:
  RMS_RES, AERO_COEFF
History output group(s): ITER, TIME_DOMAIN, WALL_TIME
Ignoring Convergence Field(s): RMS_DENSITY 
Warning: No (valid) fields chosen for convergence monitoring. Convergence monitoring inactive.
Warning: No (valid) fields chosen for time convergence monitoring. Time convergence monitoring inactive.

--------------------- Surface grid deformation (ZONE 0) -----------------
Performing the deformation of the surface grid.
Updating the surface coordinates from the input file.

------------------- Volumetric grid deformation (ZONE 0) ----------------
Performing the deformation of the volumetric grid.

WARNING: Convexity is not checked for 3D elements (issue #1171).


Completed in 12.957241 seconds on 1 core.

----------------------- Write deformed grid files -----------------------
|SU2 mesh                           |aflr3_0.su2                        |
|CSV file                           |surface_deformed.csv               |
|Paraview                           |volume_deformed.vtu                |
|Paraview surface                   |surface_deformed.vtu               |
Adding any FFD information to the SU2 file.

------------------------- Finalize Solver -------------------------
Deleted CNumerics container.
Deleted CSolver container.
Deleted CGeometry container.
Deleted CSurfaceMovement class.
Deleted CVolumetricMovement class.
Deleted CConfig container.
Deleted COutput class.

------------------------- Exit Success (SU2_DEF) ------------------------



Running SU2......

-------------------------------------------------------------------------
|    ___ _   _ ___                                                      |
|   / __| | | |_  )   Release 8.0.0 "Harrier"                           |
|   \__ \ |_| |/ /                                                      |
|   |___/\___//___|   Suite (Computational Fluid Dynamics Code)         |
|                                                                       |
-------------------------------------------------------------------------
| SU2 Project Website: https://su2code.github.io                        |
|                                                                       |
| The SU2 Project is maintained by the SU2 Foundation                   |
| (http://su2foundation.org)                                            |
-------------------------------------------------------------------------
| Copyright 2012-2023, SU2 Contributors                                 |
|                                                                       |
| SU2 is free software; you can redistribute it and/or                  |
| modify it under the terms of the GNU Lesser General Public            |
| License as published by the Free Software Foundation; either          |
| version 2.1 of the License, or (at your option) any later version.    |
|                                                                       |
| SU2 is distributed in the hope that it will be useful,                |
| but WITHOUT ANY WARRANTY; without even the implied warranty of        |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU      |
| Lesser General Public License for more details.                       |
|                                                                       |
| You should have received a copy of the GNU Lesser General Public      |
| License along with SU2. If not, see <http://www.gnu.org/licenses/>.   |
-------------------------------------------------------------------------

Parsing config file for zone 0

----------------- Physical Case Definition ( Zone 0 ) -------------------
Compressible Euler equations.
Mach number: 0.5901.
Angle of attack (AoA): 1 deg, and angle of sideslip (AoS): 0 deg.
No restart solution, use the values at infinity (freestream).
Dimensional simulation.
The reference area is 40 m^2.
The semi-span will be computed using the max y(3D) value.
The reference length is 14.1421 m.
Surface(s) where the force coefficients are evaluated and 
their reference origin for moment computation: 
   - BC_1 (0, 0, 0).
   - BC_2 (0, 0, 0) m.
Surface(s) plotted in the output file: BC_1, BC_2.
Surface(s) affected by the design variables: BC_1, BC_2.
Input mesh file name: aflr3_0.su2

--------------- Space Numerical Integration ( Zone 0 ) ------------------
Roe (with entropy fix = 0.001) solver for the flow inviscid terms.
Standard Roe without low-dissipation function.
Second order integration in space, with slope limiter.
Venkatakrishnan slope-limiting method, with constant: 0.05.
The reference element size is: 1. 
Gradient for upwind reconstruction: inverse-distance weighted Least-Squares.
Gradient for viscous and source terms: inverse-distance weighted Least-Squares.

--------------- Time Numerical Integration  ( Zone 0 ) ------------------
Local time stepping (steady state simulation).
Euler implicit method for the flow equations.
FGMRES is used for solving the linear system.
Using a ILU(0) preconditioning.
Convergence criteria of the linear solver: 1e-06.
Max number of linear iterations: 10.
V Multigrid Cycle, with 2 multigrid levels.
Damping factor for the residual restriction: 0.75.
Damping factor for the correction prolongation: 0.75.
No CFL adaptation.
+-------------------------------------------+
|  MG Level| Presmooth|PostSmooth|CorrectSmo|
+-------------------------------------------+
|         0|         1|         0|         0|
|         1|         2|         0|         0|
|         2|         3|         0|         0|
+-------------------------------------------+
Courant-Friedrichs-Lewy number:       10

------------------ Convergence Criteria  ( Zone 0 ) ---------------------
Maximum number of solver subiterations: 10.
Begin convergence monitoring at iteration 5.
Residual minimum value: 1e-8.
Cauchy series min. value: 1e-10.
Number of Cauchy elements: 100.
Begin windowed time average at iteration 0.

-------------------- Output Information ( Zone 0 ) ----------------------
File writing frequency: 
+------------------------------------+
|                     File| Frequency|
+------------------------------------+
|                  RESTART|       250|
|              SURFACE_CSV|       250|
|                 PARAVIEW|       250|
|         SURFACE_PARAVIEW|       250|
+------------------------------------+
Writing the convergence history file every 1 inner iterations.
Writing the screen convergence history every 1 inner iterations.
The tabular file format is CSV (.csv).
Convergence history file name: history.
Forces breakdown file name: forces_breakdown_su2AFLRTest.dat.
Surface file name: surface_flow_su2AFLRTest.
Volume file name: flow_su2AFLRTest.
Restart file name: restart_flow_su2AFLRTest.dat.

------------- Config File Boundary Information ( Zone 0 ) ---------------
+-----------------------------------------------------------------------+
|                        Marker Type|                        Marker Name|
+-----------------------------------------------------------------------+
|                         Euler wall|                               BC_1|
|                                   |                               BC_2|
+-----------------------------------------------------------------------+
|                          Far-field|                               BC_4|
+-----------------------------------------------------------------------+
|                  Internal boundary|                               BC_3|
+-----------------------------------------------------------------------+

-------------------- Output Preprocessing ( Zone 0 ) --------------------

WARNING: SURFACE_PRESSURE_DROP can only be computed for at least 2 surfaces (outlet, inlet, ...)

Screen output fields: TIME_ITER, OUTER_ITER, INNER_ITER, CUR_TIME, TIME_STEP, WALL_TIME, RMS_DENSITY, RMS_MOMENTUM-X, RMS_MOMENTUM-Y, RMS_ENERGY, EFFICIENCY
History output group(s): ITER, TIME_DOMAIN, WALL_TIME, RMS_RES, AERO_COEFF
Convergence field(s): RMS_DENSITY
Warning: No (valid) fields chosen for time convergence monitoring. Time convergence monitoring inactive.
Volume output fields: COORDINATES, SOLUTION, PRIMITIVE

------------------- Geometry Preprocessing ( Zone 0 ) -------------------
Three dimensional problem.
56062 grid points.
308755 volume elements.
4 surface markers.
9958 boundary elements in index 0 (Marker = BC_1).
5414 boundary elements in index 1 (Marker = BC_2).
80 boundary elements in index 2 (Marker = BC_3).
420 boundary elements in index 3 (Marker = BC_4).
308755 tetrahedra.
Setting point connectivity.
Renumbering points (Reverse Cuthill McKee Ordering).
Recomputing point connectivity.
Setting element connectivity.
Checking the numerical grid orientation.
All volume elements are correctly orientend.
All surface elements are correctly orientend.
Identifying edges and vertices.
Setting the control volume structure.
Volume of the computational grid: 2.08667e+06.
Searching for the closest normal neighbors to the surfaces.
Storing a mapping from global to local point index.
Compute the surface curvature.
Max K: 5523.56. Mean K: 58.7619. Standard deviation K: 282.437.
Checking for periodicity.
Computing mesh quality statistics for the dual control volumes.
+--------------------------------------------------------------+
|           Mesh Quality Metric|        Minimum|        Maximum|
+--------------------------------------------------------------+
|    Orthogonality Angle (deg.)|        17.0659|        85.7425|
|     CV Face Area Aspect Ratio|        1.02723|        55937.4|
|           CV Sub-Volume Ratio|        1.05439|         215979|
+--------------------------------------------------------------+
Setting the multigrid structure.
+-------------------------------------------+
|  MG Level|       CVs|Aggl. Rate|       CFL|
+-------------------------------------------+
|         0|     56062|    1/1.00|        10|
|         1|      9228|    1/6.08|   8.22061|
|         2|      1406|    1/6.56|     6.586|
+-------------------------------------------+
Finding max control volume width.
Semi-span length = 7.07107 m.
Wetted area = 95.6308 m^2.
Area projection in the x-plane = 9.17945 m^2, y-plane = 4.04295 m^2, z-plane = 44.962 m^2.
Max. coordinate in the x-direction = 12.3585 m, y-direction = 7.07107 m, z-direction = 0.521791 m.
Min. coordinate in the x-direction = 0 m, y-direction = -7.07107 m, z-direction = -0.400127 m.
Checking if Euler & Symmetry markers are straight/plane:
Boundary marker BC_1 is NOT a single plane.
Boundary marker BC_2 is NOT a single plane.
Computing wall distances.

-------------------- Solver Preprocessing ( Zone 0 ) --------------------
Inviscid flow: Computing density based on free-stream
temperature and pressure using the ideal gas law.
Force coefficients computed using free-stream values.

-- Models:
+------------------------------------------------------------------------------+
|          Viscosity Model|        Conductivity Model|              Fluid Model|
+------------------------------------------------------------------------------+
|                        -|                         -|             STANDARD_AIR|
+------------------------------------------------------------------------------+
-- Fluid properties:
+------------------------------------------------------------------------------+
|                  Name|    Dim. value|    Ref. value|      Unit|Non-dim. value|
+------------------------------------------------------------------------------+
|          Gas Constant|       287.058|             1|  N.m/kg.K|       287.058|
|      Spec. Heat Ratio|             -|             -|         -|           1.4|
+------------------------------------------------------------------------------+
-- Initial and free-stream conditions:
+------------------------------------------------------------------------------+
|                  Name|    Dim. value|    Ref. value|      Unit|Non-dim. value|
+------------------------------------------------------------------------------+
|       Static Pressure|        101325|             1|        Pa|        101325|
|               Density|       1.22498|             1|    kg/m^3|       1.22498|
|           Temperature|        288.15|             1|         K|        288.15|
|          Total Energy|        226952|             1|   m^2/s^2|        226952|
|            Velocity-X|       200.779|             1|       m/s|       200.779|
|            Velocity-Y|             0|             1|       m/s|             0|
|            Velocity-Z|       3.50461|             1|       m/s|       3.50461|
|    Velocity Magnitude|       200.809|             1|       m/s|       200.809|
+------------------------------------------------------------------------------+
|           Mach Number|             -|             -|         -|        0.5901|
+------------------------------------------------------------------------------+
Initialize Jacobian structure (Euler). MG level: 0.
Initialize Jacobian structure (Euler). MG level: 1.
Initialize Jacobian structure (Euler). MG level: 2.

------------------- Numerics Preprocessing ( Zone 0 ) -------------------

----------------- Integration Preprocessing ( Zone 0 ) ------------------

------------------- Iteration Preprocessing ( Zone 0 ) ------------------
Euler/Navier-Stokes/RANS fluid iteration.

------------------------------ Begin Solver -----------------------------

Simulation Run using the Single-zone Driver
WARNING: SU2 was not compiled for an AVX-capable architecture. Performance could be better,
         see https://su2code.github.io/docs_v7/Build-SU2-Linux-MacOS/#compiler-optimizations
WARNING: SU2 was not compiled for an AVX-capable architecture. Performance could be better,
         see https://su2code.github.io/docs_v7/Build-SU2-Linux-MacOS/#compiler-optimizations
WARNING: SU2 was not compiled for an AVX-capable architecture. Performance could be better,
         see https://su2code.github.io/docs_v7/Build-SU2-Linux-MacOS/#compiler-optimizations
+----------------------------------------------------------------------------------------------------------------------------------------------+
|   Time_Iter|  Outer_Iter|  Inner_Iter|    Cur_Time|   Time_Step|   Time(sec)|    rms[Rho]|   rms[RhoU]|   rms[RhoV]|   rms[RhoE]|        CEff|
+----------------------------------------------------------------------------------------------------------------------------------------------+
|           0|           0|           0|  0.0000e+00|  0.0000e+00|  1.4373e+00|   -0.397349|    1.978876|    1.645486|    5.093547|    1.917484|
|           0|           0|           1|  0.0000e+00|  0.0000e+00|  1.4262e+00|   -0.252045|    2.234760|    1.970250|    5.252026|    2.558863|
|           0|           0|           2|  0.0000e+00|  0.0000e+00|  1.4315e+00|   -0.196042|    2.339633|    2.224120|    5.301659|    3.948869|
|           0|           0|           3|  0.0000e+00|  0.0000e+00|  1.4242e+00|   -0.220076|    2.386540|    2.365409|    5.264943|    5.948479|
|           0|           0|           4|  0.0000e+00|  0.0000e+00|  1.4108e+00|   -0.253573|    2.408600|    2.430554|    5.223815|    7.864579|
|           0|           0|           5|  0.0000e+00|  0.0000e+00|  1.4063e+00|   -0.270783|    2.418936|    2.458803|    5.218653|    9.389224|
|           0|           0|           6|  0.0000e+00|  0.0000e+00|  1.4033e+00|   -0.286712|    2.403031|    2.476999|    5.213229|   10.603736|
|           0|           0|           7|  0.0000e+00|  0.0000e+00|  1.4004e+00|   -0.315381|    2.351751|    2.489815|    5.182543|   11.481006|
|           0|           0|           8|  0.0000e+00|  0.0000e+00|  1.3985e+00|   -0.352500|    2.274582|    2.487389|    5.133384|   11.951691|
|           0|           0|           9|  0.0000e+00|  0.0000e+00|  1.3965e+00|   -0.405104|    2.187417|    2.462671|    5.069866|   12.022914|

----------------------------- Solver Exit -------------------------------

Maximum number of iterations reached (ITER = 10) before convergence.
+-----------------------------------------------------------------------+
|      Convergence Field     |     Value    |   Criterion  |  Converged |
+-----------------------------------------------------------------------+
|                    rms[Rho]|     -0.405104|          < -8|          No|
+-----------------------------------------------------------------------+
-------------------------------------------------------------------------
+-----------------------------------------------------------------------+
|        File Writing Summary       |              Filename             |
+-----------------------------------------------------------------------+
|SU2 binary restart                 |restart_flow_su2AFLRTest.dat       |

Writing the forces breakdown file (forces_breakdown_su2AFLRTest.dat).
|CSV file                           |surface_flow_su2AFLRTest.csv       |

Writing the forces breakdown file (forces_breakdown_su2AFLRTest.dat).
|Paraview                           |flow_su2AFLRTest.vtu               |

Writing the forces breakdown file (forces_breakdown_su2AFLRTest.dat).
|Paraview surface                   |surface_flow_su2AFLRTest.vtu       |

Writing the forces breakdown file (forces_breakdown_su2AFLRTest.dat).
+-----------------------------------------------------------------------+

--------------------------- Finalizing Solver ---------------------------
Deleted CNumerics container.
Deleted CIntegration container.
Deleted CSolver container.
Deleted CIteration container.
Deleted CInterface container.
Deleted CGeometry container.
Deleted CFreeFormDefBox class.
Deleted CSurfaceMovement class.
Deleted CVolumetricMovement class.
Deleted CConfig container.
Deleted nInst container.
Deleted COutput class.
-------------------------------------------------------------------------

------------------------- Exit Success (SU2_CFD) ------------------------

Total Force - Pressure + Viscous
Cl =  0.883374 Cd =  0.073474

real	1m19.839s
user	1m9.847s
sys	0m4.608s
+ status=0
+ set +x

=================================================
CAPS verification (using pyCAPS) case su2_Morph_PyTest.py passed (as expected)
=================================================

delaundo: /Users/jenkins/util/delaundo/delaundo/src/delaundo

=================================================
+ echo 'su2_and_Delaundo_PyTest.py test;'
+ tee -a /Users/jenkins/workspace/ESP_UndefinedCaps/7.6/CAPS/CFD/DARWIN64/ESP/DARWIN64/examples/regressionTest/pyCAPSlog.txt
su2_and_Delaundo_PyTest.py test;
+ python -u su2_and_Delaundo_PyTest.py -outLevel=0
+ tee -a /Users/jenkins/workspace/ESP_UndefinedCaps/7.6/CAPS/CFD/DARWIN64/ESP/DARWIN64/examples/regressionTest/pyCAPSlog.txt
Mapping capsGroup attributes ................
	Number of unique capsGroup attributes = 5
	Name = 2DSlice, index = 1
	Name = TunnelWall, index = 2
	Name = OutFlow, index = 3
	Name = InFlow, index = 4
	Name = Airfoil, index = 5
Mapping capsMesh attributes ................
	Number of unique capsMesh attributes = 5
	Name = 2DSlice, index = 1
	Name = TunnelWall, index = 2
	Name = OutFlow, index = 3
	Name = InFlow, index = 4
	Name = Airfoil, index = 5

Getting mesh sizing parameters
	Mesh sizing name - 2DSlice
	Mesh sizing name - Airfoil
	Mesh sizing name - InFlow
	Mesh sizing name - OutFlow
	Mesh sizing name - TunnelWall
	Done getting mesh sizing parameters
Getting edge discretization for body 1
	Delaundo expects 2D meshes be in the x-y plane... attempting to rotate mesh through node swapping!
	Swapping z and y coordinates!
Writing delaundo control file - delaundo.ctr
	Writing out *.pts file
Reading delaundo mesh file - delaundoMesh.mesh
	Swapping y and z coordinates!

Writing TECPLOT file: delaundoMesh.dat ....
Finished writing TECPLOT file


Writing SU2 file ....
SU2 expects 2D meshes be in the x-y plane... attempting to rotate mesh!
Swapping z and y coordinates!
Finished writing SU2 file

Getting CFD boundary conditions
	Boundary condition name - Airfoil
	Boundary condition name - InFlow
	Boundary condition name - OutFlow
	Boundary condition name - TunnelWall
	Warning: No boundary condition specified for capsGroup 2DSlice!
	Done getting CFD boundary conditions
Warning: The su2 cfg file will be overwritten!
Write SU2 configuration file for version "Harrier (8.0.0) "


Running SU2......

-------------------------------------------------------------------------
|    ___ _   _ ___                                                      |
|   / __| | | |_  )   Release 8.0.0 "Harrier"                           |
|   \__ \ |_| |/ /                                                      |
|   |___/\___//___|   Suite (Computational Fluid Dynamics Code)         |
|                                                                       |
-------------------------------------------------------------------------
| SU2 Project Website: https://su2code.github.io                        |
|                                                                       |
| The SU2 Project is maintained by the SU2 Foundation                   |
| (http://su2foundation.org)                                            |
-------------------------------------------------------------------------
| Copyright 2012-2023, SU2 Contributors                                 |
|                                                                       |
| SU2 is free software; you can redistribute it and/or                  |
| modify it under the terms of the GNU Lesser General Public            |
| License as published by the Free Software Foundation; either          |
| version 2.1 of the License, or (at your option) any later version.    |
|                                                                       |
| SU2 is distributed in the hope that it will be useful,                |
| but WITHOUT ANY WARRANTY; without even the implied warranty of        |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU      |
| Lesser General Public License for more details.                       |
|                                                                       |
| You should have received a copy of the GNU Lesser General Public      |
| License along with SU2. If not, see <http://www.gnu.org/licenses/>.   |
-------------------------------------------------------------------------

Parsing config file for zone 0

----------------- Physical Case Definition ( Zone 0 ) -------------------
Compressible Euler equations.
Mach number: 0.4.
Angle of attack (AoA): 0 deg, and angle of sideslip (AoS): 0 deg.
No restart solution, use the values at infinity (freestream).
Dimensional simulation.
The reference area is 1 m^2.
The semi-span will be computed using the max y(3D) value.
The reference length is 1 m.
Reference origin for moment evaluation is (0, 0, 0).
Surface(s) where the force coefficients are evaluated: BC_5.

Surface(s) plotted in the output file: BC_5, BC_2.
Input mesh file name: ../delaundo/delaundoMesh.su2

--------------- Space Numerical Integration ( Zone 0 ) ------------------
Roe (with entropy fix = 0.001) solver for the flow inviscid terms.
Standard Roe without low-dissipation function.
Second order integration in space, with slope limiter.
Venkatakrishnan slope-limiting method, with constant: 0.05.
The reference element size is: 1. 
Gradient for upwind reconstruction: inverse-distance weighted Least-Squares.
Gradient for viscous and source terms: inverse-distance weighted Least-Squares.

--------------- Time Numerical Integration  ( Zone 0 ) ------------------
Local time stepping (steady state simulation).
Euler implicit method for the flow equations.
FGMRES is used for solving the linear system.
Using a ILU(0) preconditioning.
Convergence criteria of the linear solver: 1e-06.
Max number of linear iterations: 10.
V Multigrid Cycle, with 2 multigrid levels.
Damping factor for the residual restriction: 0.75.
Damping factor for the correction prolongation: 0.75.
No CFL adaptation.
+-------------------------------------------+
|  MG Level| Presmooth|PostSmooth|CorrectSmo|
+-------------------------------------------+
|         0|         1|         0|         0|
|         1|         2|         0|         0|
|         2|         3|         0|         0|
+-------------------------------------------+
Courant-Friedrichs-Lewy number:       10

------------------ Convergence Criteria  ( Zone 0 ) ---------------------
Maximum number of solver subiterations: 10.
Begin convergence monitoring at iteration 5.
Residual minimum value: 1e-14.
Cauchy series min. value: 1e-10.
Number of Cauchy elements: 100.
Begin windowed time average at iteration 0.

-------------------- Output Information ( Zone 0 ) ----------------------
File writing frequency: 
+------------------------------------+
|                     File| Frequency|
+------------------------------------+
|                  RESTART|       250|
|              SURFACE_CSV|       250|
|                  TECPLOT|       250|
|          SURFACE_TECPLOT|       250|
+------------------------------------+
Writing the convergence history file every 1 inner iterations.
Writing the screen convergence history every 1 inner iterations.
The tabular file format is CSV (.csv).
Convergence history file name: history.
Forces breakdown file name: forces_breakdown_delaundoMesh.dat.
Surface file name: surface_flow_delaundoMesh.
Volume file name: flow_delaundoMesh.
Restart file name: restart_flow_delaundoMesh.dat.

------------- Config File Boundary Information ( Zone 0 ) ---------------
+-----------------------------------------------------------------------+
|                        Marker Type|                        Marker Name|
+-----------------------------------------------------------------------+
|                         Euler wall|                               BC_5|
|                                   |                               BC_2|
+-----------------------------------------------------------------------+
|                     Inlet boundary|                               BC_4|
+-----------------------------------------------------------------------+
|                    Outlet boundary|                               BC_3|
+-----------------------------------------------------------------------+

-------------------- Output Preprocessing ( Zone 0 ) --------------------

WARNING: SURFACE_PRESSURE_DROP can only be computed for at least 2 surfaces (outlet, inlet, ...)

Screen output fields: TIME_ITER, OUTER_ITER, INNER_ITER, CUR_TIME, TIME_STEP, WALL_TIME, RMS_DENSITY, RMS_MOMENTUM-X, RMS_MOMENTUM-Y, RMS_ENERGY, EFFICIENCY
History output group(s): ITER, TIME_DOMAIN, WALL_TIME, RMS_RES, AERO_COEFF
Convergence field(s): RMS_DENSITY
Warning: No (valid) fields chosen for time convergence monitoring. Time convergence monitoring inactive.
Volume output fields: COORDINATES, SOLUTION, PRIMITIVE

------------------- Geometry Preprocessing ( Zone 0 ) -------------------
Two dimensional problem.
6320 grid points.
12346 volume elements.
5 surface markers.
24 boundary elements in index 0 (Marker = BC_2).
24 boundary elements in index 1 (Marker = BC_3).
24 boundary elements in index 2 (Marker = BC_2).
24 boundary elements in index 3 (Marker = BC_4).
198 boundary elements in index 4 (Marker = BC_5).
12346 triangles.
Setting point connectivity.
Renumbering points (Reverse Cuthill McKee Ordering).
Recomputing point connectivity.
Setting element connectivity.
Checking the numerical grid orientation.
All volume elements are correctly orientend.
There has been a re-orientation of 294 LINE surface elements.
Identifying edges and vertices.
Setting the control volume structure.
Area of the computational grid: 999.917.
Searching for the closest normal neighbors to the surfaces.
Storing a mapping from global to local point index.
Compute the surface curvature.
Max K: 1792.95. Mean K: 10.8142. Standard deviation K: 104.33.
Checking for periodicity.
Computing mesh quality statistics for the dual control volumes.
+--------------------------------------------------------------+
|           Mesh Quality Metric|        Minimum|        Maximum|
+--------------------------------------------------------------+
|    Orthogonality Angle (deg.)|        45.3524|        89.3051|
|     CV Face Area Aspect Ratio|         1.0235|        15.7138|
|           CV Sub-Volume Ratio|              1|        7.93643|
+--------------------------------------------------------------+
Setting the multigrid structure.
+-------------------------------------------+
|  MG Level|       CVs|Aggl. Rate|       CFL|
+-------------------------------------------+
|         0|      6320|    1/1.00|        10|
|         1|      1790|    1/3.53|   7.98287|
|         2|       504|    1/3.55|   6.35388|
+-------------------------------------------+
Finding max control volume width.
Wetted area = 2.07206 m.
Area projection in the x-plane = 0.179342 m, y-plane = 1.00053 m.
Max. coordinate in the x-direction = 1 m, y-direction = 0.138492 m.
Min. coordinate in the x-direction = -0.00104578 m, y-direction = -0.0151891 m.
Checking if Euler & Symmetry markers are straight/plane:
Boundary marker BC_5 is NOT a single straight.
Boundary marker BC_2 is a single straight.
Computing wall distances.

-------------------- Solver Preprocessing ( Zone 0 ) --------------------
Inviscid flow: Computing density based on free-stream
temperature and pressure using the ideal gas law.
Force coefficients computed using free-stream values.

-- Models:
+------------------------------------------------------------------------------+
|          Viscosity Model|        Conductivity Model|              Fluid Model|
+------------------------------------------------------------------------------+
|                        -|                         -|             STANDARD_AIR|
+------------------------------------------------------------------------------+
-- Fluid properties:
+------------------------------------------------------------------------------+
|                  Name|    Dim. value|    Ref. value|      Unit|Non-dim. value|
+------------------------------------------------------------------------------+
|          Gas Constant|       287.058|             1|  N.m/kg.K|       287.058|
|      Spec. Heat Ratio|             -|             -|         -|           1.4|
+------------------------------------------------------------------------------+
-- Initial and free-stream conditions:
+------------------------------------------------------------------------------+
|                  Name|    Dim. value|    Ref. value|      Unit|Non-dim. value|
+------------------------------------------------------------------------------+
|       Static Pressure|        101325|             1|        Pa|        101325|
|               Density|       1.22498|             1|    kg/m^3|       1.22498|
|           Temperature|        288.15|             1|         K|        288.15|
|          Total Energy|        216054|             1|   m^2/s^2|        216054|
|            Velocity-X|       136.119|             1|       m/s|       136.119|
|            Velocity-Y|             0|             1|       m/s|             0|
|    Velocity Magnitude|       136.119|             1|       m/s|       136.119|
+------------------------------------------------------------------------------+
|           Mach Number|             -|             -|         -|           0.4|
+------------------------------------------------------------------------------+
Initialize Jacobian structure (Euler). MG level: 0.
Initialize Jacobian structure (Euler). MG level: 1.
Initialize Jacobian structure (Euler). MG level: 2.

------------------- Numerics Preprocessing ( Zone 0 ) -------------------

----------------- Integration Preprocessing ( Zone 0 ) ------------------

------------------- Iteration Preprocessing ( Zone 0 ) ------------------
Euler/Navier-Stokes/RANS fluid iteration.

------------------------------ Begin Solver -----------------------------

Simulation Run using the Single-zone Driver
WARNING: SU2 was not compiled for an AVX-capable architecture. Performance could be better,
         see https://su2code.github.io/docs_v7/Build-SU2-Linux-MacOS/#compiler-optimizations
WARNING: SU2 was not compiled for an AVX-capable architecture. Performance could be better,
         see https://su2code.github.io/docs_v7/Build-SU2-Linux-MacOS/#compiler-optimizations
WARNING: SU2 was not compiled for an AVX-capable architecture. Performance could be better,
         see https://su2code.github.io/docs_v7/Build-SU2-Linux-MacOS/#compiler-optimizations
+----------------------------------------------------------------------------------------------------------------------------------------------+
|   Time_Iter|  Outer_Iter|  Inner_Iter|    Cur_Time|   Time_Step|   Time(sec)|    rms[Rho]|   rms[RhoU]|   rms[RhoV]|   rms[RhoE]|        CEff|
+----------------------------------------------------------------------------------------------------------------------------------------------+
|           0|           0|           0|  0.0000e+00|  0.0000e+00|  5.6980e-02|   -1.163171|    1.073770|    1.341444|    4.312165|    0.062120|
|           0|           0|           1|  0.0000e+00|  0.0000e+00|  5.6377e-02|   -1.561828|    0.808636|    0.967487|    3.922716|    0.139775|
|           0|           0|           2|  0.0000e+00|  0.0000e+00|  5.5291e-02|   -1.601698|    0.943793|    1.009036|    3.876382|    0.373708|
|           0|           0|           3|  0.0000e+00|  0.0000e+00|  5.4856e-02|   -1.659374|    1.008221|    1.015635|    3.799753|    0.952935|
|           0|           0|           4|  0.0000e+00|  0.0000e+00|  5.5388e-02|   -1.663585|    1.011627|    0.956487|    3.788246|    2.344781|
|           0|           0|           5|  0.0000e+00|  0.0000e+00|  5.5334e-02|   -1.633451|    0.991734|    0.872954|    3.829708|    6.259549|
|           0|           0|           6|  0.0000e+00|  0.0000e+00|  5.5540e-02|   -1.626398|    0.990123|    0.847075|    3.843511|   26.349556|
|           0|           0|           7|  0.0000e+00|  0.0000e+00|  5.6006e-02|   -1.643439|    1.009125|    0.895796|    3.825758|  -56.104876|
|           0|           0|           8|  0.0000e+00|  0.0000e+00|  5.5901e-02|   -1.659565|    1.020774|    0.939260|    3.804303|  -24.431167|
|           0|           0|           9|  0.0000e+00|  0.0000e+00|  5.5665e-02|   -1.676757|    1.012633|    0.938320|    3.783310|  -21.456835|

----------------------------- Solver Exit -------------------------------

Maximum number of iterations reached (ITER = 10) before convergence.
+-----------------------------------------------------------------------+
|      Convergence Field     |     Value    |   Criterion  |  Converged |
+-----------------------------------------------------------------------+
|                    rms[Rho]|      -1.67676|         < -14|          No|
+-----------------------------------------------------------------------+
-------------------------------------------------------------------------
+-----------------------------------------------------------------------+
|        File Writing Summary       |              Filename             |
+-----------------------------------------------------------------------+
|SU2 binary restart                 |restart_flow_delaundoMesh.dat      |

Writing the forces breakdown file (forces_breakdown_delaundoMesh.dat).
|CSV file                           |surface_flow_delaundoMesh.csv      |

Writing the forces breakdown file (forces_breakdown_delaundoMesh.dat).
|Tecplot binary                     |flow_delaundoMesh.szplt            |

Writing the forces breakdown file (forces_breakdown_delaundoMesh.dat).
|Tecplot binary surface             |surface_flow_delaundoMesh.szplt    |
Error in tecFileWriterClose: Not all node map values for zone 1 have been written.
Currently need 492 more values.0: Error finishing Tecplot file output.

Writing the forces breakdown file (forces_breakdown_delaundoMesh.dat).
+-----------------------------------------------------------------------+

--------------------------- Finalizing Solver ---------------------------
Deleted CNumerics container.
Deleted CIntegration container.
Deleted CSolver container.
Deleted CIteration container.
Deleted CInterface container.
Deleted CGeometry container.
Deleted CFreeFormDefBox class.
Deleted CSurfaceMovement class.
Deleted CVolumetricMovement class.
Deleted CConfig container.
Deleted nInst container.
Deleted COutput class.
-------------------------------------------------------------------------

------------------------- Exit Success (SU2_CFD) ------------------------

Total Force - Pressure + Viscous
Cl =  0.805231 Cd =  -0.037528
Cmz =  0.414714
Cx =  -0.037528 Cy =  0.805231
Pressure Contribution
Cl_p =  0.805231 Cd_p =  -0.037528
Cmz_p =  0.414714
Cx_p =  -0.037528 Cy_p =  0.805231
Viscous Contribution
Cl_v =  0.0 Cd_v =  0.0
Cmz_v =  0.0
Cx_v =  0.0 Cy_v =  0.0

real	0m3.542s
user	0m2.424s
sys	0m0.785s
+ status=0
+ set +x

=================================================
CAPS verification (using pyCAPS) case su2_and_Delaundo_PyTest.py passed (as expected)
=================================================


=================================================
+ echo 'su2_and_Tetgen_PyTest.py test;'
+ tee -a /Users/jenkins/workspace/ESP_UndefinedCaps/7.6/CAPS/CFD/DARWIN64/ESP/DARWIN64/examples/regressionTest/pyCAPSlog.txt
su2_and_Tetgen_PyTest.py test;
+ python -u su2_and_Tetgen_PyTest.py -outLevel=0
+ tee -a /Users/jenkins/workspace/ESP_UndefinedCaps/7.6/CAPS/CFD/DARWIN64/ESP/DARWIN64/examples/regressionTest/pyCAPSlog.txt
Mapping capsGroup attributes ................
	Number of unique capsGroup attributes = 3
	Name = Wing1, index = 1
	Name = Wing2, index = 2
	Name = Farfield, index = 3
Mapping capsMesh attributes ................
	Number of unique capsMesh attributes = 3
	Name = Wing1, index = 1
	Name = Wing2, index = 2
	Name = Farfield, index = 3
Getting surface mesh for body 1 (of 3)
Getting surface mesh for body 2 (of 3)
Getting surface mesh for body 3 (of 3)
Body 1 (of 3)
Number of nodes    = 2236
Number of elements = 4468
Number of node elements          = 0
Number of line elements          = 0
Number of triangle elements      = 4468
Number of quadrilateral elements = 0
Body 2 (of 3)
Number of nodes    = 636
Number of elements = 1268
Number of node elements          = 0
Number of line elements          = 0
Number of triangle elements      = 1268
Number of quadrilateral elements = 0
Body 3 (of 3)
Number of nodes    = 265
Number of elements = 526
Number of node elements          = 0
Number of line elements          = 0
Number of triangle elements      = 526
Number of quadrilateral elements = 0
----------------------------
Total number of nodes    = 3137
Total number of elements = 6262

Writing TECPLOT file: egadsTessMesh_Surf_0.dat ....
Finished writing TECPLOT file


Writing TECPLOT file: egadsTessMesh_Surf_1.dat ....
Finished writing TECPLOT file


Writing TECPLOT file: egadsTessMesh_Surf_2.dat ....
Finished writing TECPLOT file

Mapping capsGroup attributes ................
	Number of unique capsGroup attributes = 3
	Name = Wing1, index = 1
	Name = Wing2, index = 2
	Name = Farfield, index = 3
Number of surface: nodes - 3137, elements - 6262
Getting volume mesh

Generating volume mesh using TetGen.....

Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds:  0.064696
Creating surface mesh ...
Surface mesh seconds:  0.01212
Recovering boundaries...
Boundary recovery seconds:  0.126524
Removing exterior tetrahedra ...
Spreading region attributes.
Exterior tets removal seconds:  0.011855
Suppressing Steiner points ...
Steiner suppression seconds:  1.2e-05
Recovering Delaunayness...
Delaunay recovery seconds:  0.016106
Refining mesh...
  4186 insertions, added 2132 points, 130189 tetrahedra in queue.
  1393 insertions, added 396 points, 133609 tetrahedra in queue.
  1857 insertions, added 413 points, 131356 tetrahedra in queue.
  2476 insertions, added 454 points, 112928 tetrahedra in queue.
  3300 insertions, added 466 points, 67068 tetrahedra in queue.
  4399 insertions, added 435 points, 292 tetrahedra in queue.
  5864 insertions, added 590 points, 479 tetrahedra in queue.
Refinement seconds:  1.565
Smoothing vertices...
Mesh smoothing seconds:  1.19111
Improving mesh...
Mesh improvement seconds:  0.077703
Jettisoning redundant points.

Writing nodes.
Writing elements.
Writing faces.
Writing edges.

Output seconds:  0.006745
Total running seconds:  3.07268

Statistics:

  Input points: 3137
  Input facets: 6262
  Input segments: 9393
  Input holes: 2
  Input regions: 0

  Mesh points: 8091
  Mesh tetrahedra: 39789
  Mesh faces: 82710
  Mesh faces on exterior boundary: 6264
  Mesh faces on input facets: 6264
  Mesh edges on input segments: 9394
  Steiner points on input segments:  1
  Steiner points inside domain: 4953

Done meshing using TetGen!
Volume mesher did not preserve surface elements - data transfer will NOT be possible.

Writing SU2 file ....
Finished writing SU2 file

Getting CFD boundary conditions
	Boundary condition name - Farfield
	Boundary condition name - Wing1
	Boundary condition name - Wing2
	Done getting CFD boundary conditions
Warning: The su2 cfg file will be overwritten!
Write SU2 configuration file for version "Harrier (8.0.0) "


Running SU2......

-------------------------------------------------------------------------
|    ___ _   _ ___                                                      |
|   / __| | | |_  )   Release 8.0.0 "Harrier"                           |
|   \__ \ |_| |/ /                                                      |
|   |___/\___//___|   Suite (Computational Fluid Dynamics Code)         |
|                                                                       |
-------------------------------------------------------------------------
| SU2 Project Website: https://su2code.github.io                        |
|                                                                       |
| The SU2 Project is maintained by the SU2 Foundation                   |
| (http://su2foundation.org)                                            |
-------------------------------------------------------------------------
| Copyright 2012-2023, SU2 Contributors                                 |
|                                                                       |
| SU2 is free software; you can redistribute it and/or                  |
| modify it under the terms of the GNU Lesser General Public            |
| License as published by the Free Software Foundation; either          |
| version 2.1 of the License, or (at your option) any later version.    |
|                                                                       |
| SU2 is distributed in the hope that it will be useful,                |
| but WITHOUT ANY WARRANTY; without even the implied warranty of        |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU      |
| Lesser General Public License for more details.                       |
|                                                                       |
| You should have received a copy of the GNU Lesser General Public      |
| License along with SU2. If not, see <http://www.gnu.org/licenses/>.   |
-------------------------------------------------------------------------

Parsing config file for zone 0

----------------- Physical Case Definition ( Zone 0 ) -------------------
Compressible Euler equations.
Mach number: 0.5901.
Angle of attack (AoA): 1 deg, and angle of sideslip (AoS): 0 deg.
No restart solution, use the values at infinity (freestream).
Dimensional simulation.
The reference area is 50 m^2.
The semi-span will be computed using the max y(3D) value.
The reference length is 15.8114 m.
Surface(s) where the force coefficients are evaluated and 
their reference origin for moment computation: 
   - BC_1 (0, 0, 0).
   - BC_2 (0, 0, 0) m.
Surface(s) plotted in the output file: BC_1, BC_2.
Input mesh file name: ../myMesh/tetgen_0.su2

--------------- Space Numerical Integration ( Zone 0 ) ------------------
Roe (with entropy fix = 0.001) solver for the flow inviscid terms.
Standard Roe without low-dissipation function.
Second order integration in space, with slope limiter.
Venkatakrishnan slope-limiting method, with constant: 0.05.
The reference element size is: 1. 
Gradient for upwind reconstruction: inverse-distance weighted Least-Squares.
Gradient for viscous and source terms: inverse-distance weighted Least-Squares.

--------------- Time Numerical Integration  ( Zone 0 ) ------------------
Local time stepping (steady state simulation).
Euler implicit method for the flow equations.
FGMRES is used for solving the linear system.
Using a ILU(0) preconditioning.
Convergence criteria of the linear solver: 1e-06.
Max number of linear iterations: 10.
V Multigrid Cycle, with 2 multigrid levels.
Damping factor for the residual restriction: 0.75.
Damping factor for the correction prolongation: 0.75.
No CFL adaptation.
+-------------------------------------------+
|  MG Level| Presmooth|PostSmooth|CorrectSmo|
+-------------------------------------------+
|         0|         1|         0|         0|
|         1|         2|         0|         0|
|         2|         3|         0|         0|
+-------------------------------------------+
Courant-Friedrichs-Lewy number:       10

------------------ Convergence Criteria  ( Zone 0 ) ---------------------
Maximum number of solver subiterations: 5.
Begin convergence monitoring at iteration 5.
Residual minimum value: 1e-14.
Cauchy series min. value: 1e-10.
Number of Cauchy elements: 100.
Begin windowed time average at iteration 0.

-------------------- Output Information ( Zone 0 ) ----------------------
File writing frequency: 
+------------------------------------+
|                     File| Frequency|
+------------------------------------+
|                  RESTART|       250|
|              SURFACE_CSV|       250|
|                 PARAVIEW|       250|
|         SURFACE_PARAVIEW|       250|
+------------------------------------+
Writing the convergence history file every 1 inner iterations.
Writing the screen convergence history every 1 inner iterations.
The tabular file format is CSV (.csv).
Convergence history file name: history.
Forces breakdown file name: forces_breakdown_pyCAPS_SU2_Tetgen.dat.
Surface file name: surface_flow_pyCAPS_SU2_Tetgen.
Volume file name: flow_pyCAPS_SU2_Tetgen.
Restart file name: restart_flow_pyCAPS_SU2_Tetgen.dat.

------------- Config File Boundary Information ( Zone 0 ) ---------------
+-----------------------------------------------------------------------+
|                        Marker Type|                        Marker Name|
+-----------------------------------------------------------------------+
|                         Euler wall|                               BC_1|
|                                   |                               BC_2|
+-----------------------------------------------------------------------+
|                          Far-field|                               BC_3|
+-----------------------------------------------------------------------+

-------------------- Output Preprocessing ( Zone 0 ) --------------------

WARNING: SURFACE_PRESSURE_DROP can only be computed for at least 2 surfaces (outlet, inlet, ...)

Screen output fields: TIME_ITER, OUTER_ITER, INNER_ITER, CUR_TIME, TIME_STEP, WALL_TIME, RMS_DENSITY, RMS_MOMENTUM-X, RMS_MOMENTUM-Y, RMS_ENERGY, EFFICIENCY
History output group(s): ITER, TIME_DOMAIN, WALL_TIME, RMS_RES, AERO_COEFF
Convergence field(s): RMS_DENSITY
Warning: No (valid) fields chosen for time convergence monitoring. Time convergence monitoring inactive.
Volume output fields: COORDINATES, SOLUTION, PRIMITIVE

------------------- Geometry Preprocessing ( Zone 0 ) -------------------
Three dimensional problem.
8091 grid points.
39789 volume elements.
3 surface markers.
4468 boundary elements in index 0 (Marker = BC_1).
1270 boundary elements in index 1 (Marker = BC_2).
526 boundary elements in index 2 (Marker = BC_3).
39789 tetrahedra.
Setting point connectivity.
Renumbering points (Reverse Cuthill McKee Ordering).
Recomputing point connectivity.
Setting element connectivity.
Checking the numerical grid orientation.
All volume elements are correctly orientend.
All surface elements are correctly orientend.
Identifying edges and vertices.
Setting the control volume structure.
Volume of the computational grid: 2.08926e+06.
Searching for the closest normal neighbors to the surfaces.
Storing a mapping from global to local point index.
Compute the surface curvature.
Max K: 414.134. Mean K: 30.5804. Standard deviation K: 37.5377.
Checking for periodicity.
Computing mesh quality statistics for the dual control volumes.
+--------------------------------------------------------------+
|           Mesh Quality Metric|        Minimum|        Maximum|
+--------------------------------------------------------------+
|    Orthogonality Angle (deg.)|        1.66644|        84.3027|
|     CV Face Area Aspect Ratio|        1.51408|         6441.7|
|           CV Sub-Volume Ratio|        1.03202|        58553.9|
+--------------------------------------------------------------+
Setting the multigrid structure.
+-------------------------------------------+
|  MG Level|       CVs|Aggl. Rate|       CFL|
+-------------------------------------------+
|         0|      8091|    1/1.00|        10|
|         1|      1351|    1/5.99|   8.25992|
|         2|       223|    1/6.06|   6.79647|
+-------------------------------------------+
Finding max control volume width.
Semi-span length = 7.90569 m.
Wetted area = 120.046 m^2.
Area projection in the x-plane = 10.7914 m^2, y-plane = 4.58502 m^2, z-plane = 57.287 m^2.
Max. coordinate in the x-direction = 12.6407 m, y-direction = 7.90569 m, z-direction = 0.557773 m.
Min. coordinate in the x-direction = -0.00409054 m, y-direction = -7.90569 m, z-direction = -0.41192 m.
Checking if Euler & Symmetry markers are straight/plane:
Boundary marker BC_1 is NOT a single plane.
Boundary marker BC_2 is NOT a single plane.
Computing wall distances.

-------------------- Solver Preprocessing ( Zone 0 ) --------------------
Inviscid flow: Computing density based on free-stream
temperature and pressure using the ideal gas law.
Force coefficients computed using free-stream values.

-- Models:
+------------------------------------------------------------------------------+
|          Viscosity Model|        Conductivity Model|              Fluid Model|
+------------------------------------------------------------------------------+
|                        -|                         -|             STANDARD_AIR|
+------------------------------------------------------------------------------+
-- Fluid properties:
+------------------------------------------------------------------------------+
|                  Name|    Dim. value|    Ref. value|      Unit|Non-dim. value|
+------------------------------------------------------------------------------+
|          Gas Constant|       287.058|             1|  N.m/kg.K|       287.058|
|      Spec. Heat Ratio|             -|             -|         -|           1.4|
+------------------------------------------------------------------------------+
-- Initial and free-stream conditions:
+------------------------------------------------------------------------------+
|                  Name|    Dim. value|    Ref. value|      Unit|Non-dim. value|
+------------------------------------------------------------------------------+
|       Static Pressure|        101325|             1|        Pa|        101325|
|               Density|       1.22498|             1|    kg/m^3|       1.22498|
|           Temperature|        288.15|             1|         K|        288.15|
|          Total Energy|        226952|             1|   m^2/s^2|        226952|
|            Velocity-X|       200.779|             1|       m/s|       200.779|
|            Velocity-Y|             0|             1|       m/s|             0|
|            Velocity-Z|       3.50461|             1|       m/s|       3.50461|
|    Velocity Magnitude|       200.809|             1|       m/s|       200.809|
+------------------------------------------------------------------------------+
|           Mach Number|             -|             -|         -|        0.5901|
+------------------------------------------------------------------------------+
Initialize Jacobian structure (Euler). MG level: 0.
Initialize Jacobian structure (Euler). MG level: 1.
Initialize Jacobian structure (Euler). MG level: 2.

------------------- Numerics Preprocessing ( Zone 0 ) -------------------

----------------- Integration Preprocessing ( Zone 0 ) ------------------

------------------- Iteration Preprocessing ( Zone 0 ) ------------------
Euler/Navier-Stokes/RANS fluid iteration.

------------------------------ Begin Solver -----------------------------

Simulation Run using the Single-zone Driver
WARNING: SU2 was not compiled for an AVX-capable architecture. Performance could be better,
         see https://su2code.github.io/docs_v7/Build-SU2-Linux-MacOS/#compiler-optimizations
WARNING: SU2 was not compiled for an AVX-capable architecture. Performance could be better,
         see https://su2code.github.io/docs_v7/Build-SU2-Linux-MacOS/#compiler-optimizations
WARNING: SU2 was not compiled for an AVX-capable architecture. Performance could be better,
         see https://su2code.github.io/docs_v7/Build-SU2-Linux-MacOS/#compiler-optimizations
+----------------------------------------------------------------------------------------------------------------------------------------------+
|   Time_Iter|  Outer_Iter|  Inner_Iter|    Cur_Time|   Time_Step|   Time(sec)|    rms[Rho]|   rms[RhoU]|   rms[RhoV]|   rms[RhoE]|        CEff|
+----------------------------------------------------------------------------------------------------------------------------------------------+
|           0|           0|           0|  0.0000e+00|  0.0000e+00|  2.2462e-01|    0.617984|    3.049944|    2.093190|    6.108879|    1.810742|
|           0|           0|           1|  0.0000e+00|  0.0000e+00|  1.9899e-01|    0.748911|    3.251769|    2.987153|    6.248586|    2.155825|
|           0|           0|           2|  0.0000e+00|  0.0000e+00|  1.9040e-01|    0.688623|    3.311837|    3.249508|    6.186781|    3.173369|
|           0|           0|           3|  0.0000e+00|  0.0000e+00|  1.8422e-01|    0.587426|    3.265724|    3.310895|    6.060983|    4.532123|
|           0|           0|           4|  0.0000e+00|  0.0000e+00|  1.8115e-01|    0.563655|    3.196458|    3.256149|    6.028232|    5.638253|

----------------------------- Solver Exit -------------------------------

Maximum number of iterations reached (ITER = 5) before convergence.
+-----------------------------------------------------------------------+
|      Convergence Field     |     Value    |   Criterion  |  Converged |
+-----------------------------------------------------------------------+
|                    rms[Rho]|      0.563655|         < -14|          No|
+-----------------------------------------------------------------------+
-------------------------------------------------------------------------
+-----------------------------------------------------------------------+
|        File Writing Summary       |              Filename             |
+-----------------------------------------------------------------------+
|SU2 binary restart                 |restart_flow_pyCAPS_SU2_Tetgen.dat |

Writing the forces breakdown file (forces_breakdown_pyCAPS_SU2_Tetgen.dat).
|CSV file                           |surface_flow_pyCAPS_SU2_Tetgen.csv |

Writing the forces breakdown file (forces_breakdown_pyCAPS_SU2_Tetgen.dat).
|Paraview                           |flow_pyCAPS_SU2_Tetgen.vtu         |

Writing the forces breakdown file (forces_breakdown_pyCAPS_SU2_Tetgen.dat).
|Paraview surface                   |surface_flow_pyCAPS_SU2_Tetgen.vtu |

Writing the forces breakdown file (forces_breakdown_pyCAPS_SU2_Tetgen.dat).
+-----------------------------------------------------------------------+

--------------------------- Finalizing Solver ---------------------------
Deleted CNumerics container.
Deleted CIntegration container.
Deleted CSolver container.
Deleted CIteration container.
Deleted CInterface container.
Deleted CGeometry container.
Deleted CFreeFormDefBox class.
Deleted CSurfaceMovement class.
Deleted CVolumetricMovement class.
Deleted CConfig container.
Deleted nInst container.
Deleted COutput class.
-------------------------------------------------------------------------

------------------------- Exit Success (SU2_CFD) ------------------------

Total Force - Pressure + Viscous
Cl =  0.751804 Cd =  0.13334
Cmx =  -0.004647 Cmy =  -0.210652 Cmz =  0.001238
Cx =  0.120199 Cy =  0.000192 Cz =  0.754017

real	1m4.058s
user	0m58.704s
sys	0m0.969s
+ status=0
+ set +x

=================================================
CAPS verification (using pyCAPS) case su2_and_Tetgen_PyTest.py passed (as expected)
=================================================


=================================================
+ echo 'su2_X43a_PyTest.py test;'
+ tee -a /Users/jenkins/workspace/ESP_UndefinedCaps/7.6/CAPS/CFD/DARWIN64/ESP/DARWIN64/examples/regressionTest/pyCAPSlog.txt
su2_X43a_PyTest.py test;
+ python -u su2_X43a_PyTest.py -outLevel=0
+ tee -a /Users/jenkins/workspace/ESP_UndefinedCaps/7.6/CAPS/CFD/DARWIN64/ESP/DARWIN64/examples/regressionTest/pyCAPSlog.txt
Mapping capsGroup attributes ................
	Number of unique capsGroup attributes = 2
	Name = x43A, index = 1
	Name = Farfield, index = 2
Mapping capsMesh attributes ................
	Number of unique capsMesh attributes = 0
Getting surface mesh for body 1 (of 2)
Getting surface mesh for body 2 (of 2)
Body 1 (of 2)
Number of nodes    = 3808
Number of elements = 7616
Number of node elements          = 0
Number of line elements          = 0
Number of triangle elements      = 7616
Number of quadrilateral elements = 0
Body 2 (of 2)
Number of nodes    = 5654
Number of elements = 11304
Number of node elements          = 0
Number of line elements          = 0
Number of triangle elements      = 11304
Number of quadrilateral elements = 0
----------------------------
Total number of nodes    = 9462
Total number of elements = 18920

Writing TECPLOT file: egadsTessMesh_Surf_0.dat ....
Finished writing TECPLOT file


Writing TECPLOT file: egadsTessMesh_Surf_1.dat ....
Finished writing TECPLOT file

Mapping capsGroup attributes ................
	Number of unique capsGroup attributes = 2
	Name = x43A, index = 1
	Name = Farfield, index = 2
Number of surface: nodes - 9462, elements - 18920
Getting volume mesh

Generating volume mesh using TetGen.....

Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds:  0.142464
Creating surface mesh ...
Surface mesh seconds:  0.043969
Recovering boundaries...
Warning:  6 segments are not recovered.
Boundary recovery seconds:  0.339786
Removing exterior tetrahedra ...
Spreading region attributes.
Exterior tets removal seconds:  0.030086
Suppressing Steiner points ...
Steiner suppression seconds:  1.7e-05
Recovering Delaunayness...
Delaunay recovery seconds:  0.045569
Refining mesh...
  12618 insertions, added 5287 points, 2686 tetrahedra in queue.
Refinement seconds:  1.52501
Smoothing vertices...
Mesh smoothing seconds:  1.30199
Improving mesh...
Mesh improvement seconds:  0.084603
Jettisoning redundant points.

Writing nodes.
Writing elements.
Writing faces.
Writing edges.

Output seconds:  0.013931
Total running seconds:  3.53938

Statistics:

  Input points: 9462
  Input facets: 18920
  Input segments: 28380
  Input holes: 1
  Input regions: 0

  Mesh points: 14838
  Mesh tetrahedra: 61174
  Mesh faces: 131811
  Mesh faces on exterior boundary: 18926
  Mesh faces on input facets: 18926
  Mesh edges on input segments: 28383
  Steiner points on input segments:  3
  Steiner points inside domain: 5373

Done meshing using TetGen!
Volume mesher did not preserve surface elements - data transfer will NOT be possible.

Writing SU2 file ....
Finished writing SU2 file

Getting CFD boundary conditions
	Boundary condition name - Farfield
	Boundary condition name - x43A
	Done getting CFD boundary conditions
Warning: The su2 cfg file will be overwritten!
Write SU2 configuration file for version "Harrier (8.0.0) "


Running SU2......

-------------------------------------------------------------------------
|    ___ _   _ ___                                                      |
|   / __| | | |_  )   Release 8.0.0 "Harrier"                           |
|   \__ \ |_| |/ /                                                      |
|   |___/\___//___|   Suite (Computational Fluid Dynamics Code)         |
|                                                                       |
-------------------------------------------------------------------------
| SU2 Project Website: https://su2code.github.io                        |
|                                                                       |
| The SU2 Project is maintained by the SU2 Foundation                   |
| (http://su2foundation.org)                                            |
-------------------------------------------------------------------------
| Copyright 2012-2023, SU2 Contributors                                 |
|                                                                       |
| SU2 is free software; you can redistribute it and/or                  |
| modify it under the terms of the GNU Lesser General Public            |
| License as published by the Free Software Foundation; either          |
| version 2.1 of the License, or (at your option) any later version.    |
|                                                                       |
| SU2 is distributed in the hope that it will be useful,                |
| but WITHOUT ANY WARRANTY; without even the implied warranty of        |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU      |
| Lesser General Public License for more details.                       |
|                                                                       |
| You should have received a copy of the GNU Lesser General Public      |
| License along with SU2. If not, see <http://www.gnu.org/licenses/>.   |
-------------------------------------------------------------------------

Parsing config file for zone 0

----------------- Physical Case Definition ( Zone 0 ) -------------------
Compressible Euler equations.
Mach number: 3.5.
Angle of attack (AoA): 3 deg, and angle of sideslip (AoS): 0 deg.
No restart solution, use the values at infinity (freestream).
Dimensional simulation.
The reference area is 1 m^2.
The semi-span will be computed using the max y(3D) value.
The reference length is 1 m.
Reference origin for moment evaluation is (0, 0, 0).
Surface(s) where the force coefficients are evaluated: BC_1.

Surface(s) plotted in the output file: BC_1.
Input mesh file name: ../myMesh/tetgen_0.su2

--------------- Space Numerical Integration ( Zone 0 ) ------------------
Roe (with entropy fix = 0.001) solver for the flow inviscid terms.
Standard Roe without low-dissipation function.
Second order integration in space, with slope limiter.
Venkatakrishnan slope-limiting method, with constant: 0.05.
The reference element size is: 1. 
Gradient for upwind reconstruction: inverse-distance weighted Least-Squares.
Gradient for viscous and source terms: inverse-distance weighted Least-Squares.

--------------- Time Numerical Integration  ( Zone 0 ) ------------------
Local time stepping (steady state simulation).
Euler implicit method for the flow equations.
FGMRES is used for solving the linear system.
Using a ILU(0) preconditioning.
Convergence criteria of the linear solver: 1e-06.
Max number of linear iterations: 10.
V Multigrid Cycle, with 2 multigrid levels.
Damping factor for the residual restriction: 0.75.
Damping factor for the correction prolongation: 0.75.
No CFL adaptation.
+-------------------------------------------+
|  MG Level| Presmooth|PostSmooth|CorrectSmo|
+-------------------------------------------+
|         0|         1|         0|         0|
|         1|         2|         0|         0|
|         2|         3|         0|         0|
+-------------------------------------------+
Courant-Friedrichs-Lewy number:       10

------------------ Convergence Criteria  ( Zone 0 ) ---------------------
Maximum number of solver subiterations: 5.
Begin convergence monitoring at iteration 5.
Residual minimum value: 1e-14.
Cauchy series min. value: 1e-10.
Number of Cauchy elements: 100.
Begin windowed time average at iteration 0.

-------------------- Output Information ( Zone 0 ) ----------------------
File writing frequency: 
+------------------------------------+
|                     File| Frequency|
+------------------------------------+
|                  RESTART|       250|
|              SURFACE_CSV|       250|
|                 PARAVIEW|       250|
|         SURFACE_PARAVIEW|       250|
+------------------------------------+
Writing the convergence history file every 1 inner iterations.
Writing the screen convergence history every 1 inner iterations.
The tabular file format is CSV (.csv).
Convergence history file name: history.
Forces breakdown file name: forces_breakdown_x43a_Test.dat.
Surface file name: surface_flow_x43a_Test.
Volume file name: flow_x43a_Test.
Restart file name: restart_flow_x43a_Test.dat.

------------- Config File Boundary Information ( Zone 0 ) ---------------
+-----------------------------------------------------------------------+
|                        Marker Type|                        Marker Name|
+-----------------------------------------------------------------------+
|                         Euler wall|                               BC_1|
+-----------------------------------------------------------------------+
|                          Far-field|                               BC_2|
+-----------------------------------------------------------------------+

-------------------- Output Preprocessing ( Zone 0 ) --------------------

WARNING: SURFACE_PRESSURE_DROP can only be computed for at least 2 surfaces (outlet, inlet, ...)

Screen output fields: TIME_ITER, OUTER_ITER, INNER_ITER, CUR_TIME, TIME_STEP, WALL_TIME, RMS_DENSITY, RMS_MOMENTUM-X, RMS_MOMENTUM-Y, RMS_ENERGY, EFFICIENCY
History output group(s): ITER, TIME_DOMAIN, WALL_TIME, RMS_RES, AERO_COEFF
Convergence field(s): RMS_DENSITY
Warning: No (valid) fields chosen for time convergence monitoring. Time convergence monitoring inactive.
Volume output fields: COORDINATES, SOLUTION, PRIMITIVE

------------------- Geometry Preprocessing ( Zone 0 ) -------------------
Three dimensional problem.
14838 grid points.
61174 volume elements.
2 surface markers.
7622 boundary elements in index 0 (Marker = BC_1).
11304 boundary elements in index 1 (Marker = BC_2).
61174 tetrahedra.
Setting point connectivity.
Renumbering points (Reverse Cuthill McKee Ordering).
Recomputing point connectivity.
Setting element connectivity.
Checking the numerical grid orientation.
All volume elements are correctly orientend.
All surface elements are correctly orientend.
Identifying edges and vertices.
Setting the control volume structure.
Volume of the computational grid: 2.67744e+08.
Searching for the closest normal neighbors to the surfaces.
Storing a mapping from global to local point index.
Compute the surface curvature.
Max K: 95.6599. Mean K: 0.525156. Standard deviation K: 2.5799.
Checking for periodicity.
Computing mesh quality statistics for the dual control volumes.
+--------------------------------------------------------------+
|           Mesh Quality Metric|        Minimum|        Maximum|
+--------------------------------------------------------------+
|    Orthogonality Angle (deg.)|        1.95659|        83.8221|
|     CV Face Area Aspect Ratio|        1.41663|        23894.3|
|           CV Sub-Volume Ratio|              1|         751631|
+--------------------------------------------------------------+
Setting the multigrid structure.
+-------------------------------------------+
|  MG Level|       CVs|Aggl. Rate|       CFL|
+-------------------------------------------+
|         0|     14838|    1/1.00|        10|
|         1|      2667|    1/5.56|   8.46526|
|         2|       482|    1/5.53|   7.17915|
+-------------------------------------------+
Finding max control volume width.
Semi-span length = 30 m.
Wetted area = 13597.1 m^2.
Area projection in the x-plane = 761.677 m^2, y-plane = 2062.72 m^2, z-plane = 5463.61 m^2.
Max. coordinate in the x-direction = 150 m, y-direction = 30 m, z-direction = 19 m.
Min. coordinate in the x-direction = 0 m, y-direction = -30 m, z-direction = -10.3 m.
Checking if Euler & Symmetry markers are straight/plane:
Boundary marker BC_1 is NOT a single plane.
Computing wall distances.

-------------------- Solver Preprocessing ( Zone 0 ) --------------------
Inviscid flow: Computing density based on free-stream
temperature and pressure using the ideal gas law.
Force coefficients computed using free-stream values.

-- Models:
+------------------------------------------------------------------------------+
|          Viscosity Model|        Conductivity Model|              Fluid Model|
+------------------------------------------------------------------------------+
|                        -|                         -|             STANDARD_AIR|
+------------------------------------------------------------------------------+
-- Fluid properties:
+------------------------------------------------------------------------------+
|                  Name|    Dim. value|    Ref. value|      Unit|Non-dim. value|
+------------------------------------------------------------------------------+
|          Gas Constant|       287.058|             1|  N.m/kg.K|       287.058|
|      Spec. Heat Ratio|             -|             -|         -|           1.4|
+------------------------------------------------------------------------------+
-- Initial and free-stream conditions:
+------------------------------------------------------------------------------+
|                  Name|    Dim. value|    Ref. value|      Unit|Non-dim. value|
+------------------------------------------------------------------------------+
|       Static Pressure|        101325|             1|        Pa|        101325|
|               Density|       1.22498|             1|    kg/m^3|       1.22498|
|           Temperature|        288.15|             1|         K|        288.15|
|          Total Energy|        916077|             1|   m^2/s^2|        916077|
|            Velocity-X|       1189.41|             1|       m/s|       1189.41|
|            Velocity-Y|             0|             1|       m/s|             0|
|            Velocity-Z|       62.3342|             1|       m/s|       62.3342|
|    Velocity Magnitude|       1191.04|             1|       m/s|       1191.04|
+------------------------------------------------------------------------------+
|           Mach Number|             -|             -|         -|           3.5|
+------------------------------------------------------------------------------+
Initialize Jacobian structure (Euler). MG level: 0.
Initialize Jacobian structure (Euler). MG level: 1.
Initialize Jacobian structure (Euler). MG level: 2.

------------------- Numerics Preprocessing ( Zone 0 ) -------------------

----------------- Integration Preprocessing ( Zone 0 ) ------------------

------------------- Iteration Preprocessing ( Zone 0 ) ------------------
Euler/Navier-Stokes/RANS fluid iteration.

------------------------------ Begin Solver -----------------------------

Simulation Run using the Single-zone Driver
WARNING: SU2 was not compiled for an AVX-capable architecture. Performance could be better,
         see https://su2code.github.io/docs_v7/Build-SU2-Linux-MacOS/#compiler-optimizations
WARNING: SU2 was not compiled for an AVX-capable architecture. Performance could be better,
         see https://su2code.github.io/docs_v7/Build-SU2-Linux-MacOS/#compiler-optimizations
WARNING: SU2 was not compiled for an AVX-capable architecture. Performance could be better,
         see https://su2code.github.io/docs_v7/Build-SU2-Linux-MacOS/#compiler-optimizations
+----------------------------------------------------------------------------------------------------------------------------------------------+
|   Time_Iter|  Outer_Iter|  Inner_Iter|    Cur_Time|   Time_Step|   Time(sec)|    rms[Rho]|   rms[RhoU]|   rms[RhoV]|   rms[RhoE]|        CEff|
+----------------------------------------------------------------------------------------------------------------------------------------------+
|           0|           0|           0|  0.0000e+00|  0.0000e+00|  3.4726e-01|    2.731555|    5.665595|    4.729268|    8.731031|   -0.388627|
|           0|           0|           1|  0.0000e+00|  0.0000e+00|  3.3314e-01|    3.124663|    6.168534|    5.652640|    9.147040|   -0.130921|
|           0|           0|           2|  0.0000e+00|  0.0000e+00|  3.2230e-01|    3.268952|    6.335622|    5.772165|    9.248809|   -0.048395|
|           0|           0|           3|  0.0000e+00|  0.0000e+00|  3.1762e-01|    3.301113|    6.357856|    5.754955|    9.278436|   -0.050401|
|           0|           0|           4|  0.0000e+00|  0.0000e+00|  3.1435e-01|    3.246860|    6.294604|    5.587733|    9.212152|   -0.079853|

----------------------------- Solver Exit -------------------------------

Maximum number of iterations reached (ITER = 5) before convergence.
+-----------------------------------------------------------------------+
|      Convergence Field     |     Value    |   Criterion  |  Converged |
+-----------------------------------------------------------------------+
|                    rms[Rho]|       3.24686|         < -14|          No|
+-----------------------------------------------------------------------+
-------------------------------------------------------------------------
+-----------------------------------------------------------------------+
|        File Writing Summary       |              Filename             |
+-----------------------------------------------------------------------+
|SU2 binary restart                 |restart_flow_x43a_Test.dat         |

Writing the forces breakdown file (forces_breakdown_x43a_Test.dat).
|CSV file                           |surface_flow_x43a_Test.csv         |

Writing the forces breakdown file (forces_breakdown_x43a_Test.dat).
|Paraview                           |flow_x43a_Test.vtu                 |

Writing the forces breakdown file (forces_breakdown_x43a_Test.dat).
|Paraview surface                   |surface_flow_x43a_Test.vtu         |

Writing the forces breakdown file (forces_breakdown_x43a_Test.dat).
+-----------------------------------------------------------------------+
Warning: there are 127 non-physical points in the solution.
Warning: 84 reconstructed states for upwinding are non-physical.

--------------------------- Finalizing Solver ---------------------------
Deleted CNumerics container.
Deleted CIntegration container.
Deleted CSolver container.
Deleted CIteration container.
Deleted CInterface container.
Deleted CGeometry container.
Deleted CFreeFormDefBox class.
Deleted CSurfaceMovement class.
Deleted CVolumetricMovement class.
Deleted CConfig container.
Deleted nInst container.
Deleted COutput class.
-------------------------------------------------------------------------

------------------------- Exit Success (SU2_CFD) ------------------------

Total Force - Pressure + Viscous
Cl =  -9.174312 Cd =  114.890297
Cmx =  -22.490238 Cmy =  9469.942794 Cmz =  370.964066
Cx =  115.21299 Cy =  3.225665 Cz =  -3.148845

real	0m23.957s
user	0m37.001s
sys	0m1.384s
+ status=0
+ set +x

=================================================
CAPS verification (using pyCAPS) case su2_X43a_PyTest.py passed (as expected)
=================================================

./execute_PyTestRegression.sh: line 413: ulimit: stack size: cannot modify limit: Operation not permitted
flowCart: /Users/jenkins/util/cart3d/cart3d_v1.5.9_OSX64_ICC--22.11.16/bin/OSX64_ICC//flowCart

=================================================
+ echo 'cart3d_PyTest.py test;'
+ tee -a /Users/jenkins/workspace/ESP_UndefinedCaps/7.6/CAPS/CFD/DARWIN64/ESP/DARWIN64/examples/regressionTest/pyCAPSlog.txt
cart3d_PyTest.py test;
+ python -u cart3d_PyTest.py -outLevel=0
+ tee -a /Users/jenkins/workspace/ESP_UndefinedCaps/7.6/CAPS/CFD/DARWIN64/ESP/DARWIN64/examples/regressionTest/pyCAPSlog.txt
Loading AIM
Mapping capsGroup attributes ................
	Number of unique capsGroup attributes = 1
	Name = Wing, index = 1
 Body size = 3.796888
 Tessellating body 1 with  MaxEdge = 0.094922  Sag = 0.003797  Angle = 15.000000
 Executing: autoInputs -r 30.000000 -nDiv 6 -maxR 9  > autoInputs.out
 Executing: ./aero.csh > aero.out
C_A  0.023693377
C_Y  -0.0012129281
C_N  0.065395002
C_D  0.025961197
C_S  -0.0012129281
C_L  0.064528278
C_l  0.0510971
C_m  0.000248187
C_n  -0.017525
C_M_x  0.0504544
C_M_y  0.000248187
C_M_z  -0.0192976

real	0m24.726s
user	0m34.674s
sys	0m1.019s
+ status=0
+ set +x

=================================================
CAPS verification (using pyCAPS) case cart3d_PyTest.py passed (as expected)
=================================================


=================================================
+ echo 'cart3d_OpenMDAO_3_alpha_PyTest.py test;'
+ tee -a /Users/jenkins/workspace/ESP_UndefinedCaps/7.6/CAPS/CFD/DARWIN64/ESP/DARWIN64/examples/regressionTest/pyCAPSlog.txt
cart3d_OpenMDAO_3_alpha_PyTest.py test;
+ python -u cart3d_OpenMDAO_3_alpha_PyTest.py -outLevel=0
+ tee -a /Users/jenkins/workspace/ESP_UndefinedCaps/7.6/CAPS/CFD/DARWIN64/ESP/DARWIN64/examples/regressionTest/pyCAPSlog.txt
----------------------------------------
>>> alpha [2.]
Mapping capsGroup attributes ................
	Number of unique capsGroup attributes = 1
	Name = Wing, index = 1

Getting CFD design variables.......
	Number of design variables - 1
	Design Variable name - alpha
	Done getting CFD design variables
Getting CFD functional.......
	Number of design variables - 1
	Objective name - CL2
	Done getting CFD functional
 Body size = 3.625615
 Tessellating body 1 with  MaxEdge = 0.090640  Sag = 0.003626  Angle = 15.000000
 Executing: autoInputs -r 30.000000 -nDiv 5 -maxR 7  -mesh2d > autoInputs.out
 o Evaluating Cart3D functionals and/or gradients
   ATTENTION: using static geometry ../inputs/Components.i.tri
   (12:23:14) Running aero.csh on 2 core(s) in M0.5901A2B0_DP1
   (12:23:17) aero.csh done
 o case M0.5901A2B0_DP1, averaging data over 1 cycle(s)
>>> CL2 [0.01631562]  CL 0.12773309
----------------------------------------
----------------------------------------
>>> alpha [2.]
>>> CL2 [0.01631562]  CL 0.12773309
----------------------------------------
========================================
 o Evaluating Cart3D functionals and/or gradients
   ATTENTION: using static geometry ../inputs/Components.i.tri
   (12:23:19) Running aero.csh on 2 core(s) in M0.5901A2B0_DP1
   (12:23:21) aero.csh done
              Max memory allowed:       32 GB
              Flow hexes:               2188
              Estimated cutter memory:  0.000219 GB / DV
              Estimated xsensit memory: 0.004157 GB / DV
              Available threads:        2
              # DVs:                    1
   o Number of simultaneous cutter jobs:   1
   (12:23:22) Linearizing cut-cells
   (12:23:22) ... done
   o Number of simultaneous xsensit jobs:  1
   (12:23:22) Computing gradients
   (12:23:26) ... done
 o case M0.5901A2B0_DP1, averaging data over 1 cycle(s)
>>> CL2_alpha [[0.01572627]]
========================================
RUNNING THE L-BFGS-B CODE

           * * *

Machine precision = 2.220D-16
 N =            1     M =           10

At X0         0 variables are exactly at the bounds

At iterate    0    f=  1.63156D-02    |proj g|=  1.57263D-02
----------------------------------------
>>> alpha [1.98427373]
 o Evaluating Cart3D functionals and/or gradients
   ATTENTION: using static geometry ../inputs/Components.i.tri
   (12:23:28) Running aero.csh on 2 core(s) in M0.5901A1.98427B0_DP1
   (12:23:30) aero.csh done
 o case M0.5901A1.98427B0_DP1, averaging data over 1 cycle(s)
>>> CL2 [0.01606724]  CL 0.12675617
----------------------------------------
========================================
 o Evaluating Cart3D functionals and/or gradients
   ATTENTION: using static geometry ../inputs/Components.i.tri
   (12:23:32) Running aero.csh on 2 core(s) in M0.5901A1.98427B0_DP1
   (12:23:34) aero.csh done
              Max memory allowed:       32 GB
              Flow hexes:               2188
              Estimated cutter memory:  0.000219 GB / DV
              Estimated xsensit memory: 0.004157 GB / DV
              Available threads:        2
              # DVs:                    1
   o Number of simultaneous cutter jobs:   1
   (12:23:35) Linearizing cut-cells
   (12:23:35) ... done
   o Number of simultaneous xsensit jobs:  1
   (12:23:35) Computing gradients
   (12:23:39) ... done
 o case M0.5901A1.98427B0_DP1, averaging data over 1 cycle(s)
>>> CL2_alpha [[0.01560329]]
========================================

At iterate    1    f=  1.60672D-02    |proj g|=  1.56033D-02
----------------------------------------
>>> alpha [-0.01099175]
 o Evaluating Cart3D functionals and/or gradients
   ATTENTION: using static geometry ../inputs/Components.i.tri
   (12:23:40) Running aero.csh on 2 core(s) in M0.5901A-0.0109918B0_DP1
   (12:23:42) aero.csh done
 o case M0.5901A-0.0109918B0_DP1, averaging data over 1 cycle(s)
>>> CL2 [6.05653687e-06]  CL 0.00246101
----------------------------------------
========================================
 o Evaluating Cart3D functionals and/or gradients
   ATTENTION: using static geometry ../inputs/Components.i.tri
   (12:23:43) Running aero.csh on 2 core(s) in M0.5901A-0.0109918B0_DP1
   (12:23:46) aero.csh done
              Max memory allowed:       32 GB
              Flow hexes:               2188
              Estimated cutter memory:  0.000219 GB / DV
              Estimated xsensit memory: 0.004157 GB / DV
              Available threads:        2
              # DVs:                    1
   o Number of simultaneous cutter jobs:   1
   (12:23:47) Linearizing cut-cells
   (12:23:47) ... done
   o Number of simultaneous xsensit jobs:  1
   (12:23:47) Computing gradients
   (12:23:51) ... done
 o case M0.5901A-0.0109918B0_DP1, averaging data over 1 cycle(s)
>>> CL2_alpha [[0.00031042]]
========================================

At iterate    2    f=  6.05654D-06    |proj g|=  3.10424D-04
----------------------------------------
>>> alpha [-0.05149286]
 o Evaluating Cart3D functionals and/or gradients
   ATTENTION: using static geometry ../inputs/Components.i.tri
   (12:23:52) Running aero.csh on 2 core(s) in M0.5901A-0.0514929B0_DP1
   (12:23:54) aero.csh done
 o case M0.5901A-0.0514929B0_DP1, averaging data over 1 cycle(s)
>>> CL2 [2.59817201e-10]  CL 1.612e-05
----------------------------------------
========================================
 o Evaluating Cart3D functionals and/or gradients
   ATTENTION: using static geometry ../inputs/Components.i.tri
   (12:23:56) Running aero.csh on 2 core(s) in M0.5901A-0.0514929B0_DP1
   (12:23:59) aero.csh done
              Max memory allowed:       32 GB
              Flow hexes:               2188
              Estimated cutter memory:  0.000219 GB / DV
              Estimated xsensit memory: 0.004157 GB / DV
              Available threads:        2
              # DVs:                    1
   o Number of simultaneous cutter jobs:   1
   (12:23:59) Linearizing cut-cells
   (12:23:59) ... done
   o Number of simultaneous xsensit jobs:  1
   (12:23:59) Computing gradients
   (12:24:03) ... done
 o case M0.5901A-0.0514929B0_DP1, averaging data over 1 cycle(s)
>>> CL2_alpha [[2.03612486e-06]]
========================================

At iterate    3    f=  2.59817D-10    |proj g|=  2.03612D-06
----------------------------------------
>>> alpha [-0.05176027]
 o Evaluating Cart3D functionals and/or gradients
   ATTENTION: using static geometry ../inputs/Components.i.tri
   (12:24:04) Running aero.csh on 2 core(s) in M0.5901A-0.0517603B0_DP1
   (12:24:07) aero.csh done
 o case M0.5901A-0.0517603B0_DP1, averaging data over 1 cycle(s)
>>> CL2 [9.26120217e-15]  CL 1e-07
----------------------------------------
========================================
 o Evaluating Cart3D functionals and/or gradients
   ATTENTION: using static geometry ../inputs/Components.i.tri
   (12:24:09) Running aero.csh on 2 core(s) in M0.5901A-0.0517603B0_DP1
   (12:24:12) aero.csh done
              Max memory allowed:       32 GB
              Flow hexes:               2188
              Estimated cutter memory:  0.000219 GB / DV
              Estimated xsensit memory: 0.004157 GB / DV
              Available threads:        2
              # DVs:                    1
   o Number of simultaneous cutter jobs:   1
   (12:24:12) Linearizing cut-cells
   (12:24:12) ... done
   o Number of simultaneous xsensit jobs:  1
   (12:24:12) Computing gradients
   (12:24:16) ... done
 o case M0.5901A-0.0517603B0_DP1, averaging data over 1 cycle(s)
>>> CL2_alpha [[1.21394333e-08]]
========================================

At iterate    4    f=  9.26120D-15    |proj g|=  1.21394D-08

           * * *

Tit   = total number of iterations
Tnf   = total number of function evaluations
Tnint = total number of segments explored during Cauchy searches
Skip  = number of BFGS updates skipped
Nact  = number of active bounds at final generalized Cauchy point
Projg = norm of the final projected gradient
F     = final function value

           * * *

   N    Tit     Tnf  Tnint  Skip  Nact     Projg        F
    1      4      5      4     0     0   1.214D-08   9.261D-15
  F =   9.2612021713000013E-015

CONVERGENCE: NORM_OF_PROJECTED_GRADIENT_<=_PGTOL            
Optimization Complete
-----------------------------------
Optimized value: [-0.05176027]

real	1m29.962s
user	0m51.313s
sys	0m10.561s
+ status=0
+ set +x

=================================================
CAPS verification (using pyCAPS) case cart3d_OpenMDAO_3_alpha_PyTest.py passed (as expected)
=================================================


=================================================
+ echo 'cart3d_OpenMDAO_3_twist_PyTest.py test;'
+ tee -a /Users/jenkins/workspace/ESP_UndefinedCaps/7.6/CAPS/CFD/DARWIN64/ESP/DARWIN64/examples/regressionTest/pyCAPSlog.txt
cart3d_OpenMDAO_3_twist_PyTest.py test;
+ tee -a /Users/jenkins/workspace/ESP_UndefinedCaps/7.6/CAPS/CFD/DARWIN64/ESP/DARWIN64/examples/regressionTest/pyCAPSlog.txt
+ python -u cart3d_OpenMDAO_3_twist_PyTest.py -outLevel=0
----------------------------------------
>>> twist [4.]
Mapping capsGroup attributes ................
	Number of unique capsGroup attributes = 1
	Name = Wing, index = 1

Getting CFD design variables.......
	Number of design variables - 1
	Design Variable name - twist
	Done getting CFD design variables
Getting CFD functional.......
	Number of design variables - 1
	Objective name - CL2
	Done getting CFD functional
 Body size = 3.630958
 Tessellating body 1 with  MaxEdge = 0.018155  Sag = 0.000908  Angle = 10.000000
 Executing: autoInputs -r 5.123450 -nDiv 5 -maxR 7  -symmY -halfBody > autoInputs.out
 o Evaluating Cart3D functionals and/or gradients
   ATTENTION: using static geometry ../inputs/Components.i.tri
   (12:24:27) Running aero.csh on 2 core(s) in M0.5901A0B0_DP1
   (12:24:43) aero.csh done
 o case M0.5901A0B0_DP1, averaging data over 1 cycle(s)
>>> CL2 [0.00411365]  CL 0.0641354
----------------------------------------
----------------------------------------
>>> twist [4.]
>>> CL2 [0.00411365]  CL 0.0641354
----------------------------------------
========================================
 o Evaluating Cart3D functionals and/or gradients
   ATTENTION: using static geometry ../inputs/Components.i.tri
   (12:24:47) Running aero.csh on 2 core(s) in M0.5901A0B0_DP1
   (12:25:12) aero.csh done
              Max memory allowed:       32 GB
              Flow hexes:               37528
              Estimated cutter memory:  0.003753 GB / DV
              Estimated xsensit memory: 0.071303 GB / DV
              Available threads:        2
              # DVs:                    1
   o Number of simultaneous cutter jobs:   1
   (12:25:13) Linearizing cut-cells
   (12:25:15) ... done
   o Number of simultaneous xsensit jobs:  1
   (12:25:15) Computing gradients
   (12:25:19) ... done
 o case M0.5901A0B0_DP1, averaging data over 1 cycle(s)
>>> CL2_twist [[0.00210056]]
========================================
RUNNING THE L-BFGS-B CODE

           * * *

Machine precision = 2.220D-16
 N =            1     M =           10

At X0         0 variables are exactly at the bounds

At iterate    0    f=  4.11365D-03    |proj g|=  2.10056D-03
----------------------------------------
>>> twist [3.99789944]
Mapping capsGroup attributes ................
	Number of unique capsGroup attributes = 1
	Name = Wing, index = 1
 Body size = 3.630955
 Tessellating body 1 with  MaxEdge = 0.018155  Sag = 0.000908  Angle = 10.000000
 Executing: autoInputs -r 5.123450 -nDiv 5 -maxR 7  -symmY -halfBody > autoInputs.out
 o Evaluating Cart3D functionals and/or gradients
   ATTENTION: using static geometry ../inputs/Components.i.tri
   (12:25:24) Running aero.csh on 2 core(s) in M0.5901A0B0_DP1
   (12:25:40) aero.csh done
 o case M0.5901A0B0_DP1, averaging data over 1 cycle(s)
>>> CL2 [0.0041123]  CL 0.0641197
----------------------------------------
========================================
 o Evaluating Cart3D functionals and/or gradients
   ATTENTION: using static geometry ../inputs/Components.i.tri
   (12:25:42) Running aero.csh on 2 core(s) in M0.5901A0B0_DP1
   (12:26:05) aero.csh done
              Max memory allowed:       32 GB
              Flow hexes:               37527
              Estimated cutter memory:  0.003753 GB / DV
              Estimated xsensit memory: 0.071301 GB / DV
              Available threads:        2
              # DVs:                    1
   o Number of simultaneous cutter jobs:   1
   (12:26:05) Linearizing cut-cells
   (12:26:07) ... done
   o Number of simultaneous xsensit jobs:  1
   (12:26:07) Computing gradients
   (12:26:11) ... done
 o case M0.5901A0B0_DP1, averaging data over 1 cycle(s)
>>> CL2_twist [[0.00210014]]
========================================

At iterate    1    f=  4.11230D-03    |proj g|=  2.10014D-03
----------------------------------------
>>> twist [-6.47168788]
Mapping capsGroup attributes ................
	Number of unique capsGroup attributes = 1
	Name = Wing, index = 1
 Body size = 3.635635
 Tessellating body 1 with  MaxEdge = 0.018178  Sag = 0.000909  Angle = 10.000000
 Executing: autoInputs -r 5.123450 -nDiv 5 -maxR 7  -symmY -halfBody > autoInputs.out
 o Evaluating Cart3D functionals and/or gradients
   ATTENTION: using static geometry ../inputs/Components.i.tri
   (12:26:17) Running aero.csh on 2 core(s) in M0.5901A0B0_DP1
   (12:26:32) aero.csh done
 o case M0.5901A0B0_DP1, averaging data over 1 cycle(s)
>>> CL2 [0.00980712]  CL -0.0990178
----------------------------------------
========================================
 o Evaluating Cart3D functionals and/or gradients
   ATTENTION: using static geometry ../inputs/Components.i.tri
   (12:26:35) Running aero.csh on 2 core(s) in M0.5901A0B0_DP1
   (12:26:58) aero.csh done
              Max memory allowed:       32 GB
              Flow hexes:               37091
              Estimated cutter memory:  0.003709 GB / DV
              Estimated xsensit memory: 0.070473 GB / DV
              Available threads:        2
              # DVs:                    1
   o Number of simultaneous cutter jobs:   1
   (12:26:59) Linearizing cut-cells
   (12:27:01) ... done
   o Number of simultaneous xsensit jobs:  1
   (12:27:01) Computing gradients
   (12:27:05) ... done
 o case M0.5901A0B0_DP1, averaging data over 1 cycle(s)
>>> CL2_twist [[-0.00318447]]
========================================
----------------------------------------
>>> twist [-0.15773834]
Mapping capsGroup attributes ................
	Number of unique capsGroup attributes = 1
	Name = Wing, index = 1
 Body size = 3.625777
 Tessellating body 1 with  MaxEdge = 0.018129  Sag = 0.000906  Angle = 10.000000
 Executing: autoInputs -r 5.123450 -nDiv 5 -maxR 7  -symmY -halfBody > autoInputs.out
 o Evaluating Cart3D functionals and/or gradients
   ATTENTION: using static geometry ../inputs/Components.i.tri
   (12:27:10) Running aero.csh on 2 core(s) in M0.5901A0B0_DP1
   (12:27:25) aero.csh done
 o case M0.5901A0B0_DP1, averaging data over 1 cycle(s)
>>> CL2 [2.57285894e-07]  CL -0.00057627
----------------------------------------
========================================
 o Evaluating Cart3D functionals and/or gradients
   ATTENTION: using static geometry ../inputs/Components.i.tri
   (12:27:27) Running aero.csh on 2 core(s) in M0.5901A0B0_DP1
   (12:27:50) aero.csh done
              Max memory allowed:       32 GB
              Flow hexes:               37755
              Estimated cutter memory:  0.003776 GB / DV
              Estimated xsensit memory: 0.071735 GB / DV
              Available threads:        2
              # DVs:                    1
   o Number of simultaneous cutter jobs:   1
   (12:27:50) Linearizing cut-cells
   (12:27:52) ... done
   o Number of simultaneous xsensit jobs:  1
   (12:27:52) Computing gradients
   (12:27:56) ... done
 o case M0.5901A0B0_DP1, averaging data over 1 cycle(s)
>>> CL2_twist [[-1.67855736e-05]]
========================================

At iterate    2    f=  2.57286D-07    |proj g|=  1.67856D-05
----------------------------------------
>>> twist [-0.12478737]
Mapping capsGroup attributes ................
	Number of unique capsGroup attributes = 1
	Name = Wing, index = 1
 Body size = 3.625742
 Tessellating body 1 with  MaxEdge = 0.018129  Sag = 0.000906  Angle = 10.000000
 Executing: autoInputs -r 5.123450 -nDiv 5 -maxR 7  -symmY -halfBody > autoInputs.out
 o Evaluating Cart3D functionals and/or gradients
   ATTENTION: using static geometry ../inputs/Components.i.tri
   (12:28:01) Running aero.csh on 2 core(s) in M0.5901A0B0_DP1
   (12:28:16) aero.csh done
 o case M0.5901A0B0_DP1, averaging data over 1 cycle(s)
>>> CL2 [1.79305062e-08]  CL 0.00016606
----------------------------------------
========================================
 o Evaluating Cart3D functionals and/or gradients
   ATTENTION: using static geometry ../inputs/Components.i.tri
   (12:28:18) Running aero.csh on 2 core(s) in M0.5901A0B0_DP1
   (12:28:40) aero.csh done
              Max memory allowed:       32 GB
              Flow hexes:               37755
              Estimated cutter memory:  0.003776 GB / DV
              Estimated xsensit memory: 0.071735 GB / DV
              Available threads:        2
              # DVs:                    1
   o Number of simultaneous cutter jobs:   1
   (12:28:41) Linearizing cut-cells
   (12:28:43) ... done
   o Number of simultaneous xsensit jobs:  1
   (12:28:43) Computing gradients
   (12:28:47) ... done
 o case M0.5901A0B0_DP1, averaging data over 1 cycle(s)
>>> CL2_twist [[4.43472956e-06]]
========================================

At iterate    3    f=  1.79305D-08    |proj g|=  4.43473D-06

           * * *

Tit   = total number of iterations
Tnf   = total number of function evaluations
Tnint = total number of segments explored during Cauchy searches
Skip  = number of BFGS updates skipped
Nact  = number of active bounds at final generalized Cauchy point
Projg = norm of the final projected gradient
F     = final function value

           * * *

   N    Tit     Tnf  Tnint  Skip  Nact     Projg        F
    1      3      5      3     0     0   4.435D-06   1.793D-08
  F =   1.7930506241000003E-008

CONVERGENCE: REL_REDUCTION_OF_F_<=_FACTR*EPSMCH             
Optimization Complete
-----------------------------------
Optimized values: [-0.12478737]

real	4m30.401s
user	6m46.980s
sys	0m12.484s
+ status=0
+ set +x

=================================================
CAPS verification (using pyCAPS) case cart3d_OpenMDAO_3_twist_PyTest.py passed (as expected)
=================================================


=================================================
+ echo 'fun3d_Morph_PyTest.py test;'
+ tee -a /Users/jenkins/workspace/ESP_UndefinedCaps/7.6/CAPS/CFD/DARWIN64/ESP/DARWIN64/examples/regressionTest/pyCAPSlog.txt
fun3d_Morph_PyTest.py test;
+ python -u fun3d_Morph_PyTest.py -outLevel=0 -noAnalysis
+ tee -a /Users/jenkins/workspace/ESP_UndefinedCaps/7.6/CAPS/CFD/DARWIN64/ESP/DARWIN64/examples/regressionTest/pyCAPSlog.txt
Mapping capsGroup attributes ................
	Number of unique capsGroup attributes = 3
	Name = Wing1, index = 1
	Name = Wing2, index = 2
	Name = Farfield, index = 3
Mapping capsMesh attributes ................
	Number of unique capsMesh attributes = 3
	Name = Wing1, index = 1
	Name = Wing2, index = 2
	Name = Farfield, index = 3
AFLR4    : Proximity BG Surface Grid Generation Skipped
AFLR4    : No Modifications Required

Writing TECPLOT file: pyCAPS_AFLR4_AFLR3.dat ....
Finished writing TECPLOT file

Mapping capsMesh attributes ................
	Number of unique capsMesh attributes = 3
	Name = Wing1, index = 1
	Name = Wing2, index = 2
	Name = Farfield, index = 3
Mapping capsGroup attributes ................
	Number of unique capsGroup attributes = 3
	Name = Wing1, index = 1
	Name = Wing2, index = 2
	Name = Farfield, index = 3
Getting volume mesh
 
AFLR2    : ---------------------------------------
AFLR2    : AFLR2 LIBRARY
AFLR2    : ADVANCING-FRONT/LOCAL-RECONNECTION
AFLR2    : TRIA/QUAD GRID GENERATOR
AFLR2    : Version Number 9.14.7
AFLR2    : Version Date   07/16/23 @ 01:42PM
AFLR2    : Compile OS     Darwin 22.5.0 x86_64
AFLR2    : Compile Date   07/25/23 @ 11:59AM
AFLR2    : Copyright 1994-2021, D.L. Marcum
AFLR2    : ---------------------------------------
 
AFLR4    : ---------------------------------------
AFLR4    : AFLR4 LIBRARY
AFLR4    : ADVANCING-FRONT/LOCAL-RECONNECTION
AFLR4    : TRIA/QUAD SURFACE GRID GENERATOR
AFLR4    : Version Number 11.5.9
AFLR4    : Version Date   08/14/23 @ 12:27AM
AFLR4    : Compile OS     Darwin 22.5.0 x86_64
AFLR4    : Compile Date   08/14/23 @ 01:13PM
AFLR4    : Copyright 1994-2021, D.L. Marcum
AFLR4    : ---------------------------------------

EGADS    : ---------------------------------------
EGADS    : Engineering Geometry Aircraft Design System
EGADS    : Version 1.25
EGADS    : OpenCASCADE Version 7.6.0
EGADS    : ---------------------------------------

EGADS    : ---------------------------------------
EGADS    : Engineering Geometry Aircraft Design System
EGADS    : Version 1.25
EGADS    : OpenCASCADE Version 7.6.0
EGADS    : ---------------------------------------
Volume mesh:
	Number of nodes          = 79623
	Number of elements       = 464233
	Number of triangles      = 15680
	Number of quadrilatarals = 0
	Number of tetrahedrals   = 448553
	Number of pyramids       = 0
	Number of prisms         = 0
	Number of hexahedrals    = 0

Writing TECPLOT file: pyCAPS_AFLR4_AFLR3_VolMesh.dat ....
Finished writing TECPLOT file

Getting CFD boundary conditions
	Boundary condition name - Farfield
	Boundary condition name - Wing1
	Boundary condition name - Wing2
	Done getting CFD boundary conditions

Getting CFD design variables.......
	Number of design variables - 2
	Design Variable name - Alpha
	Design Variable name - twist
	Done getting CFD design variables
Getting CFD functional.......
	Number of design variables - 2
	Objective name - Cd2
	Objective name - Const
	Done getting CFD functional
Python library was linked, but will not be used!
Creating FUN3D directory tree
DesignVariable = Alpha
DesignVariable = twist
Writing sensitivity file for body 1, File - Rubberize/model.tec.1.sd1
Writing sensitivity file for body 2, File - Rubberize/model.tec.2.sd1
Writing sensitivity file for body 3, File - Rubberize/model.tec.3.sd1
Writing rubber.data 
Writing surface file for 1 (of 3) in body 1 File - Flow/fun3dAFLRTest_body1.dat
Writing surface file for 1 (of 3) in body 1 File - Flow/fun3dAFLRTest_body1.dat
Writing surface file for 1 (of 3) in body 1 File - Flow/fun3dAFLRTest_body1.dat

Writing MAPBC file ....
Finished writing MAPBC file

Warning: The fun3d.nml file will be overwritten!
Writing fun3d.nml
Info: No recognized data transfer names found.
Reading rubber.data 
Projecting tessellation 1 (of 3) on to new body
Projecting tessellation 2 (of 3) on to new body
Projecting tessellation 3 (of 3) on to new body
Python library was linked, but will not be used!
Creating FUN3D directory tree
DesignVariable = Alpha
DesignVariable = twist
Writing sensitivity file for body 1, File - Rubberize/model.tec.1.sd1
Writing sensitivity file for body 2, File - Rubberize/model.tec.2.sd1
Writing sensitivity file for body 3, File - Rubberize/model.tec.3.sd1
Writing surface file for 1 (of 3) in body 1 File - Flow/fun3dAFLRTest_body1.dat
Writing surface file for 1 (of 3) in body 1 File - Flow/fun3dAFLRTest_body1.dat
Writing surface file for 1 (of 3) in body 1 File - Flow/fun3dAFLRTest_body1.dat

Writing MAPBC file ....
Finished writing MAPBC file

Warning: The fun3d.nml file will be overwritten!
Writing fun3d.nml
Info: No recognized data transfer names found.
Reading rubber.data 

real	0m16.286s
user	0m13.913s
sys	0m1.002s
+ status=0
+ set +x

=================================================
CAPS verification (using pyCAPS) case fun3d_Morph_PyTest.py passed (as expected)
=================================================


*************************************************
*************************************************

=================================================
Did not run examples for:

Fun3D
=================================================

All tests pass!


=================================================
=================================================
[GNU C Compiler (gcc)] Parsing console log (workspace: '/Users/jenkins/workspace/ESP_UndefinedCaps/7.6/CAPS/CFD/DARWIN64')
[GNU C Compiler (gcc)] Successfully parsed console log
[GNU C Compiler (gcc)] -> found 0 issues (skipped 0 duplicates)
[GNU C Compiler (gcc)] Skipping post processing
[GNU C Compiler (gcc)] No filter has been set, publishing all 0 issues
[GNU C Compiler (gcc)] Repository miner is not configured, skipping repository mining
[Clang] Parsing console log (workspace: '/Users/jenkins/workspace/ESP_UndefinedCaps/7.6/CAPS/CFD/DARWIN64')
[Clang] -> found 0 issues (skipped 0 duplicates)
[Clang] Parsing console log (workspace: '/Users/jenkins/workspace/ESP_UndefinedCaps/7.6/CAPS/CFD/DARWIN64')
[Clang] -> found 0 issues (skipped 0 duplicates)
[Clang] Successfully parsed console log
[Clang] -> found 0 issues (skipped 0 duplicates)
[Clang] Parsing console log (workspace: '/Users/jenkins/workspace/ESP_UndefinedCaps/7.6/CAPS/CFD/DARWIN64')
[Clang] Skipping post processing
[Clang] No filter has been set, publishing all 0 issues
[Clang] Repository miner is not configured, skipping repository mining
[Static Analysis] Successfully parsed console log
[Static Analysis] -> found 0 issues (skipped 0 duplicates)
[Static Analysis] Parsing console log (workspace: '/Users/jenkins/workspace/ESP_UndefinedCaps/7.6/CAPS/CFD/DARWIN64')
[Static Analysis] Successfully parsed console log
[Static Analysis] -> found 0 issues (skipped 0 duplicates)
[Static Analysis] Skipping post processing
[Static Analysis] No filter has been set, publishing all 0 issues
[Static Analysis] Repository miner is not configured, skipping repository mining
[Static Analysis] Successfully parsed console log
[Static Analysis] -> found 0 issues (skipped 0 duplicates)
[Static Analysis] Successfully parsed console log
[Static Analysis] -> found 0 issues (skipped 0 duplicates)
[Static Analysis] Successfully parsed console log
[Static Analysis] -> found 0 issues (skipped 0 duplicates)
[Static Analysis] Parsing console log (workspace: '/Users/jenkins/workspace/ESP_UndefinedCaps/7.6/CAPS/CFD/DARWIN64')
[Static Analysis] Skipping post processing
[Static Analysis] No filter has been set, publishing all 0 issues
[Static Analysis] Repository miner is not configured, skipping repository mining
[Static Analysis] Reference build recorder is not configured
[Static Analysis] Obtaining reference build from same job (7.6,CAPS/CFD,DARWIN64,macys)
[Static Analysis] Using reference build 'ESP_UndefinedCaps/CASREV=7.6,ESPTEST=CAPS/CFD,ESP_ARCH=DARWIN64,buildnode=macys #193' to compute new, fixed, and outstanding issues
[Static Analysis] Issues delta (vs. reference build): outstanding: 0, new: 0, fixed: 0
[Static Analysis] Evaluating quality gates
[Static Analysis] -> PASSED - Total (any severity): 0 - Quality Gate: 1
[Static Analysis] -> All quality gates have been passed
[Static Analysis] Health report is disabled - skipping
[Static Analysis] Created analysis result for 0 issues (found 0 new issues, fixed 0 issues)
[Static Analysis] Attaching ResultAction with ID 'analysis' to build 'ESP_UndefinedCaps/CASREV=7.6,ESPTEST=CAPS/CFD,ESP_ARCH=DARWIN64,buildnode=macys #194'.
[Checks API] No suitable checks publisher found.
[PostBuildScript] - [INFO] Executing post build scripts.
[PostBuildScript] - [INFO] build step #0 should only be executed on MATRIX
[WS-CLEANUP] Deleting project workspace...
[WS-CLEANUP] done
Finished: SUCCESS