Skip to content
Success

Console Output

Skipping 1,457 KB.. Full Log
  boundary name = Wing1.
    Wing1 already in boundary name list.
Checking for blunt flag attribute on geometry faces.
Performing initialization pass on all unstructured domains.
Unstructured domain list for assembly has 14 entries.
Structured domain list for assembly has 0 entries.
Periodic target domain list for assembly has 0 entries.
Creating unstructured block from 14 domains.
Block = auto-blk
  Setting up unstructured block.
Retrieving block attributes from geometry.
  Initializing unstructured block.
CAE Solver set to UGRID
GeomToMesh finished!
Sat Oct 08 2022  6:09:43PM EDT
Run Time: 00 Hours 00 Minutes 03 Seconds
Pointwise save filename = caps.GeomToMesh.pw
Sat Oct 08 2022  6:09:43PM EDT
Exporting in UGRID format to file basename = caps.GeomToMesh
Mapped 81 / 81 curves to EGADS originals
GMA contains 27 edge groups
GMA contains 14 face groups
Wrote geometry-mesh associativity to caps.GeomToMesh.gma
GeomToMesh I/O finished!
Sat Oct 08 2022  6:09:45PM EDT
Export Time: 00 Hours 00 Minutes 02 Seconds
Volume mesh:
	Number of nodes          = 9661
	Number of elements       = 54319
	Number of triangles      = 3008
	Number of quadrilatarals = 0
	Number of tetrahedrals   = 54319
	Number of pyramids       = 0
	Number of prisms         = 0
	Number of hexahedrals    = 0
Body = 1
	Number of nodes    = 1508
	Number of elements = 3008
	Number of tris = 3008
	Number of quad = 0
No project name ("Proj_Name") provided - A volume mesh will not be written out
.ERROR:: BAD STATUS = -276 from matsol (called from solveSketchOrig:54487)
Mapping capsGroup attributes ................
	Number of unique capsGroup attributes = 5
	Name = box, index = 1
	Name = cone, index = 2
	Name = sphere, index = 3
	Name = bullet, index = 4
	Name = farfield, index = 5
Mapping capsMesh attributes ................
	Number of unique capsMesh attributes = 0
Writing global Glyph inputs...
Writing egads file '/Users/jenkins/workspace/ESP_UndefinedCaps/7.4/CAPS/unit/DARWIN64/CAPS/legacy/aim/pyCAPS/__main__/Scratch/workDir_PointwiseTestAll_pointwiseAIM/caps.egads'....


Running pointwise......
Number of command line arguments = 2
Sat Oct 08 2022  6:09:47PM EDT
Pointwise V18.5
Loading user defaults from capsUserDefaults.glf
GeomToMesh: Defaults
Connector level
    InitDim                  = 6
    MaxDim                   = 8
    MinDim                   = 3
    TurnAngle                = 0.000000
    Deviation                = 0.000000
    SplitAngle               = 0.000000
    JoinCons                 = 0
    ProxGrowthRate           = 1.300000
    SourceSpacing            = 0
    TurnAngleHard            = 70.000000
    EqualSpacing             = 0
Domain level
    Algorithm                = Delaunay
    FullLayers               = 0
    MaxLayers                = 0
    GrowthRate               = 1.300000
    IsoType                  = Triangle
    TRexType                 = Triangle
    TRexARLimit              = 200.000000
    TRexAngleBC              = 0.000000
    Decay                    = 0.500000
    MinEdge                  = 0.000000
    MaxEdge                  = 0.000000
    Adapt                    = 0
    WallSpacing              = 0.000000
    StrDomConvertARTrigger   = 0.000000
Block level
    Algorithm                = Delaunay
    VoxelLayers              = 3
    boundaryDecay            = 0.500000
    collisionBuffer          = 0.500000
    maxSkewAngle             = 180.000000
    TRexSkewDelay            = 0
    edgeMaxGrowthRate        = 1.800000
    fullLayers               = 0
    maxLayers                = 0
    growthRate               = 1.300000
    TRexType                 = TetPyramid
    volInitialize            = 1
General
    SkipMeshing              = 1
    CAESolver                = UGRID
    outerBoxScale            = 0
    sourceBoxLengthScale     = 0.000000
    sourceBoxDirection       =  1.000000 0.000000 0.000000 
    sourceBoxAngle           = 0.000000
    sourceGrowthFactor       = 10.000000
    sourcePCDFile            = 
    ModelSize                = 0
    writeGMA                 = 2.0
    assembleTolMult          = 2.0
    modelOrientIntMeshVolume = 1
Elevate On Export
    degree                   = Q1
    costThreshold            = 0.8
    maxIncAngle              = 175.0
    relax                    = 0.05
    smoothingPasses          = 1000
    WCNWeight                = 0.5
    WCNMode                  = Calculate
    writeVTU                 = false
CADFile = caps.egads
Determining model size from file.
Info: Model Size adjusted to 10
Computing maximum DB edge tolerance.
  Quilt list has 20 entries.
  Quilt quilt-1: edge tolerance = 5e-08
  Quilt quilt-2: edge tolerance = 5e-08
  Quilt quilt-3: edge tolerance = 5e-08
  Quilt quilt-4: edge tolerance = 5e-08
  Quilt quilt-5: edge tolerance = 5e-08
  Quilt quilt-6: edge tolerance = 5e-08
  Quilt quilt-7: edge tolerance = 2.76559e-06
  Quilt quilt-8: edge tolerance = 2.76559e-06
  Quilt quilt-9: edge tolerance = 2.76559e-06
  Quilt quilt-10: edge tolerance = 6.91474e-06
  Quilt quilt-11: edge tolerance = 6.91474e-06
  Quilt quilt-12: edge tolerance = 5e-08
  Quilt quilt-13: edge tolerance = 2.40433e-07
  Quilt quilt-14: edge tolerance = 2.40433e-07
  Quilt quilt-15: edge tolerance = 5e-08
  Quilt quilt-16: edge tolerance = 5e-08
  Quilt quilt-17: edge tolerance = 5e-08
  Quilt quilt-18: edge tolerance = 5e-08
  Quilt quilt-19: edge tolerance = 5e-08
  Quilt quilt-20: edge tolerance = 5e-08
  Maximum DB edge tolerance = 6.91474e-06
Performing model assembly pass on geometry entities.
domParams(MinEdge) defined as 1.382948e-05 due to model assembly tolerance
Looking for quilt names in geometry.
  Quilt list has 20 entries.
Quilt list has 20 entries.
Original connector list has 34 entries.
Minimum connector length = 0.322396
Tolerance = 6.91474e-06
Performing merge on connectors with equal dimensions and common end points.
After regular merge, connector list has 34 entries.
Updating conData
Min Edge Tol: 5.000e-08 on con-1
Max Edge Tol: 6.915e-06 on con-21
Adjusting connector dimensions based on average spacings.
Checking dimension for connector 1/34, name = con-1
Checking dimension for connector 2/34, name = con-2
Checking dimension for connector 3/34, name = con-3
Checking dimension for connector 4/34, name = con-4
Checking dimension for connector 5/34, name = con-5
Checking dimension for connector 6/34, name = con-6
Checking dimension for connector 7/34, name = con-7
Checking dimension for connector 8/34, name = con-8
Checking dimension for connector 9/34, name = con-9
Checking dimension for connector 10/34, name = con-11
Checking dimension for connector 11/34, name = con-13
Checking dimension for connector 12/34, name = con-15
Checking dimension for connector 13/34, name = con-16
Checking dimension for connector 14/34, name = con-17
  Changing dimension for connector 14/34 from 6 to 3
Checking dimension for connector 15/34, name = con-18
  Changing dimension for connector 15/34 from 6 to 3
Checking dimension for connector 16/34, name = con-20
Checking dimension for connector 17/34, name = con-21
Checking dimension for connector 18/34, name = con-22
Checking dimension for connector 19/34, name = con-23
  Changing dimension for connector 19/34 from 6 to 3
Checking dimension for connector 20/34, name = con-24
Checking dimension for connector 21/34, name = con-25
Checking dimension for connector 22/34, name = con-27
  Changing dimension for connector 22/34 from 6 to 3
Checking dimension for connector 23/34, name = con-28
  Changing dimension for connector 23/34 from 6 to 3
Checking dimension for connector 24/34, name = con-29
  Changing dimension for connector 24/34 from 6 to 3
Checking dimension for connector 25/34, name = con-30
  Changing dimension for connector 25/34 from 6 to 3
Checking dimension for connector 26/34, name = con-31
  Changing dimension for connector 26/34 from 6 to 3
Checking dimension for connector 27/34, name = con-32
  Changing dimension for connector 27/34 from 6 to 3
Checking dimension for connector 28/34, name = con-33
  Changing dimension for connector 28/34 from 6 to 3
Checking dimension for connector 29/34, name = con-34
  Changing dimension for connector 29/34 from 6 to 3
Checking dimension for connector 30/34, name = con-35
  Changing dimension for connector 30/34 from 6 to 3
Checking dimension for connector 31/34, name = con-36
Checking dimension for connector 32/34, name = con-38
Checking dimension for connector 33/34, name = con-40
Checking dimension for connector 34/34, name = con-42
Processing spacing values for connector 1/34, name = con-1
Processing spacing values for connector 2/34, name = con-2
Processing spacing values for connector 3/34, name = con-3
Processing spacing values for connector 4/34, name = con-4
Processing spacing values for connector 5/34, name = con-5
Processing spacing values for connector 6/34, name = con-6
Processing spacing values for connector 7/34, name = con-7
Processing spacing values for connector 8/34, name = con-8
Processing spacing values for connector 9/34, name = con-9
Processing spacing values for connector 10/34, name = con-11
Processing spacing values for connector 11/34, name = con-13
Processing spacing values for connector 12/34, name = con-15
Processing spacing values for connector 13/34, name = con-16
Processing spacing values for connector 14/34, name = con-17
Processing spacing values for connector 15/34, name = con-18
Processing spacing values for connector 16/34, name = con-20
Processing spacing values for connector 17/34, name = con-21
Processing spacing values for connector 18/34, name = con-22
Processing spacing values for connector 19/34, name = con-23
Processing spacing values for connector 20/34, name = con-24
Processing spacing values for connector 21/34, name = con-25
Processing spacing values for connector 22/34, name = con-27
Processing spacing values for connector 23/34, name = con-28
Processing spacing values for connector 24/34, name = con-29
Processing spacing values for connector 25/34, name = con-30
Processing spacing values for connector 26/34, name = con-31
Processing spacing values for connector 27/34, name = con-32
Processing spacing values for connector 28/34, name = con-33
Processing spacing values for connector 29/34, name = con-34
Processing spacing values for connector 30/34, name = con-35
Processing spacing values for connector 31/34, name = con-36
Processing spacing values for connector 32/34, name = con-38
Processing spacing values for connector 33/34, name = con-40
Processing spacing values for connector 34/34, name = con-42
Number of unique endpoints = 24
Checking for baffle intersections.
Performing Local Proximity Refinement
Adjusting connector dimensions based on proximity to other connectors.
  Proximity test for connector 1/34, con-1.
  Proximity test for connector 2/34, con-2.
  Proximity test for connector 3/34, con-3.
  Proximity test for connector 4/34, con-4.
  Proximity test for connector 5/34, con-5.
  Proximity test for connector 6/34, con-6.
  Proximity test for connector 7/34, con-7.
  Proximity test for connector 8/34, con-8.
  Proximity test for connector 9/34, con-9.
  Proximity test for connector 10/34, con-11.
  Proximity test for connector 11/34, con-13.
  Proximity test for connector 12/34, con-15.
  Proximity test for connector 13/34, con-16.
  Proximity test for connector 14/34, con-17.
    Connector dimension changed from 3 to 5, avg. spacing changed from 0.559017 to 0.279508
  Proximity test for connector 15/34, con-18.
    Connector dimension changed from 3 to 5, avg. spacing changed from 0.559017 to 0.279508
  Proximity test for connector 16/34, con-20.
    Connector dimension changed from 6 to 6, avg. spacing changed from 0.314159 to 0.314159
  Proximity test for connector 17/34, con-21.
  Proximity test for connector 18/34, con-22.
  Proximity test for connector 19/34, con-23.
  Proximity test for connector 20/34, con-24.
    Connector dimension changed from 6 to 8, avg. spacing changed from 0.301819 to 0.215585
  Proximity test for connector 21/34, con-25.
    Connector dimension changed from 6 to 8, avg. spacing changed from 0.628319 to 0.448799
  Proximity test for connector 22/34, con-27.
    Connector dimension changed from 3 to 7, avg. spacing changed from 0.589734 to 0.196578
  Proximity test for connector 23/34, con-28.
    Connector dimension changed from 3 to 8, avg. spacing changed from 2 to 0.571429
  Proximity test for connector 24/34, con-29.
    Connector dimension changed from 3 to 8, avg. spacing changed from 2 to 0.571429
  Proximity test for connector 25/34, con-30.
    Connector dimension changed from 3 to 8, avg. spacing changed from 2 to 0.571429
  Proximity test for connector 26/34, con-31.
    Connector dimension changed from 3 to 8, avg. spacing changed from 2 to 0.571429
  Proximity test for connector 27/34, con-32.
    Connector dimension changed from 3 to 8, avg. spacing changed from 2 to 0.571429
  Proximity test for connector 28/34, con-33.
    Connector dimension changed from 3 to 8, avg. spacing changed from 2 to 0.571429
  Proximity test for connector 29/34, con-34.
    Connector dimension changed from 3 to 8, avg. spacing changed from 2 to 0.571429
  Proximity test for connector 30/34, con-35.
    Connector dimension changed from 3 to 8, avg. spacing changed from 2 to 0.571429
  Proximity test for connector 31/34, con-36.
    Connector dimension changed from 6 to 8, avg. spacing changed from 3 to 2.14286
  Proximity test for connector 32/34, con-38.
    Connector dimension changed from 6 to 8, avg. spacing changed from 3 to 2.14286
  Proximity test for connector 33/34, con-40.
    Connector dimension changed from 6 to 8, avg. spacing changed from 3 to 2.14286
  Proximity test for connector 34/34, con-42.
    Connector dimension changed from 6 to 8, avg. spacing changed from 3 to 2.14286
Adjusting node spacing from geometry
con-2 Input connector dimension is a double = 2.00000000000000e+00 
Rounding to integer = 2
Adjusting connector dimensions based on end spacings.
Connector con-1 current dim = 6
Connector con-2 current dim = 6
Connector con-3 current dim = 6
Connector con-4 current dim = 6
Connector con-5 current dim = 6
Connector con-6 current dim = 6
Connector con-7 current dim = 6
Connector con-8 current dim = 6
Connector con-9 current dim = 6
Connector con-11 current dim = 6
Connector con-13 current dim = 6
Connector con-15 current dim = 6
Connector con-16 current dim = 6
Connector con-17 current dim = 5
Connector con-18 current dim = 5
Connector con-20 current dim = 6
Connector con-21 current dim = 6
Connector con-22 current dim = 6
Connector con-23 current dim = 3
Connector con-24 current dim = 8
Connector con-25 current dim = 8
Connector con-27 current dim = 7
Connector con-28 current dim = 8
Connector con-29 current dim = 8
Connector con-30 current dim = 8
Connector con-31 current dim = 8
Connector con-32 current dim = 8
Connector con-33 current dim = 8
Connector con-34 current dim = 8
Connector con-35 current dim = 8
Connector con-36 current dim = 8
Connector con-38 current dim = 8
Connector con-40 current dim = 8
Connector con-42 current dim = 8
Domain list has 20 entries.
Looking for periodic domain attributes from geometry.
  Tolerance = 6.91474e-06
Number of periodic target domains = 0
Unstructured domain 1 of 20:
  boundary name = box.
    Creating boundary name box
Unstructured domain 2 of 20:
  boundary name = box.
    box already in boundary name list.
Unstructured domain 3 of 20:
  boundary name = box.
    box already in boundary name list.
Unstructured domain 4 of 20:
  boundary name = box.
    box already in boundary name list.
Unstructured domain 5 of 20:
  boundary name = box.
    box already in boundary name list.
Unstructured domain 6 of 20:
  boundary name = box.
    box already in boundary name list.
Unstructured domain 7 of 20:
  boundary name = cone.
    Creating boundary name cone
Unstructured domain 8 of 20:
  boundary name = cone.
    cone already in boundary name list.
Unstructured domain 9 of 20:
  boundary name = cone.
    cone already in boundary name list.
Unstructured domain 10 of 20:
  boundary name = sphere.
    Creating boundary name sphere
Unstructured domain 11 of 20:
  boundary name = sphere.
    sphere already in boundary name list.
Unstructured domain 12 of 20:
  boundary name = bullet.
    Creating boundary name bullet
Unstructured domain 13 of 20:
  boundary name = bullet.
    bullet already in boundary name list.
Unstructured domain 14 of 20:
  boundary name = bullet.
    bullet already in boundary name list.
Unstructured domain 15 of 20:
  boundary name = farfield.
    Creating boundary name farfield
Unstructured domain 16 of 20:
  boundary name = farfield.
    farfield already in boundary name list.
Unstructured domain 17 of 20:
  boundary name = farfield.
    farfield already in boundary name list.
Unstructured domain 18 of 20:
  boundary name = farfield.
    farfield already in boundary name list.
Unstructured domain 19 of 20:
  boundary name = farfield.
    farfield already in boundary name list.
Unstructured domain 20 of 20:
  boundary name = farfield.
    farfield already in boundary name list.
Checking for blunt flag attribute on geometry faces.
Performing initialization pass on all unstructured domains.
Unstructured domain list for assembly has 20 entries.
Structured domain list for assembly has 0 entries.
Periodic target domain list for assembly has 0 entries.
Creating unstructured block from 20 domains.
Block = auto-blk
  Setting up unstructured block.
Retrieving block attributes from geometry.
  Initializing unstructured block.
CAE Solver set to UGRID
GeomToMesh finished!
Sat Oct 08 2022  6:09:49PM EDT
Run Time: 00 Hours 00 Minutes 02 Seconds
Pointwise save filename = caps.GeomToMesh.pw
Sat Oct 08 2022  6:09:49PM EDT
Exporting in UGRID format to file basename = caps.GeomToMesh
Mapped 102 / 102 curves to EGADS originals
GMA contains 34 edge groups
GMA contains 20 face groups
Wrote geometry-mesh associativity to caps.GeomToMesh.gma
GeomToMesh I/O finished!
Sat Oct 08 2022  6:09:50PM EDT
Export Time: 00 Hours 00 Minutes 01 Seconds
Volume mesh:
	Number of nodes          = 2545
	Number of elements       = 13318
	Number of triangles      = 1338
	Number of quadrilatarals = 0
	Number of tetrahedrals   = 13318
	Number of pyramids       = 0
	Number of prisms         = 0
	Number of hexahedrals    = 0
Body = 1
	Number of nodes    = 230
	Number of elements = 456
	Number of tris = 456
	Number of quad = 0
Body = 2
	Number of nodes    = 42
	Number of elements = 80
	Number of tris = 80
	Number of quad = 0
Body = 3
	Number of nodes    = 49
	Number of elements = 94
	Number of tris = 94
	Number of quad = 0
Body = 4
	Number of nodes    = 69
	Number of elements = 134
	Number of tris = 134
	Number of quad = 0
Body = 5
	Number of nodes    = 289
	Number of elements = 574
	Number of tris = 574
	Number of quad = 0
No project name ("Proj_Name") provided - A volume mesh will not be written out
.
Analysis object with the name, pointwiseAIM, has already been initilized
An altName of pointwiseAIM_1 will be used!
Mapping capsGroup attributes ................
	Number of unique capsGroup attributes = 2
	Name = box, index = 1
	Name = farfield, index = 2
Mapping capsMesh attributes ................
	Number of unique capsMesh attributes = 0
Writing global Glyph inputs...
Writing egads file '/Users/jenkins/workspace/ESP_UndefinedCaps/7.4/CAPS/unit/DARWIN64/CAPS/legacy/aim/pyCAPS/__main__/Scratch/workDir_PointwiseTestBox_pointwiseAIM/caps.egads'....


Running pointwise......
Number of command line arguments = 2
Sat Oct 08 2022  6:09:52PM EDT
Pointwise V18.5
Loading user defaults from capsUserDefaults.glf
GeomToMesh: Defaults
Connector level
    InitDim                  = 6
    MaxDim                   = 8
    MinDim                   = 3
    TurnAngle                = 0.000000
    Deviation                = 0.000000
    SplitAngle               = 0.000000
    JoinCons                 = 0
    ProxGrowthRate           = 1.300000
    SourceSpacing            = 0
    TurnAngleHard            = 70.000000
    EqualSpacing             = 0
Domain level
    Algorithm                = Delaunay
    FullLayers               = 0
    MaxLayers                = 0
    GrowthRate               = 1.300000
    IsoType                  = Triangle
    TRexType                 = Triangle
    TRexARLimit              = 200.000000
    TRexAngleBC              = 0.000000
    Decay                    = 0.500000
    MinEdge                  = 0.000000
    MaxEdge                  = 0.000000
    Adapt                    = 0
    WallSpacing              = 0.000000
    StrDomConvertARTrigger   = 0.000000
Block level
    Algorithm                = Delaunay
    VoxelLayers              = 3
    boundaryDecay            = 0.500000
    collisionBuffer          = 0.500000
    maxSkewAngle             = 180.000000
    TRexSkewDelay            = 0
    edgeMaxGrowthRate        = 1.800000
    fullLayers               = 0
    maxLayers                = 0
    growthRate               = 1.300000
    TRexType                 = TetPyramid
    volInitialize            = 1
General
    SkipMeshing              = 1
    CAESolver                = UGRID
    outerBoxScale            = 0
    sourceBoxLengthScale     = 0.000000
    sourceBoxDirection       =  1.000000 0.000000 0.000000 
    sourceBoxAngle           = 0.000000
    sourceGrowthFactor       = 10.000000
    sourcePCDFile            = 
    ModelSize                = 0
    writeGMA                 = 2.0
    assembleTolMult          = 2.0
    modelOrientIntMeshVolume = 1
Elevate On Export
    degree                   = Q1
    costThreshold            = 0.8
    maxIncAngle              = 175.0
    relax                    = 0.05
    smoothingPasses          = 1000
    WCNWeight                = 0.5
    WCNMode                  = Calculate
    writeVTU                 = false
CADFile = caps.egads
Determining model size from file.
Info: Model Size adjusted to 10
Computing maximum DB edge tolerance.
  Quilt list has 12 entries.
  Quilt quilt-1: edge tolerance = 5e-08
  Quilt quilt-2: edge tolerance = 5e-08
  Quilt quilt-3: edge tolerance = 5e-08
  Quilt quilt-4: edge tolerance = 5e-08
  Quilt quilt-5: edge tolerance = 5e-08
  Quilt quilt-6: edge tolerance = 5e-08
  Quilt quilt-7: edge tolerance = 5e-08
  Quilt quilt-8: edge tolerance = 5e-08
  Quilt quilt-9: edge tolerance = 5e-08
  Quilt quilt-10: edge tolerance = 5e-08
  Quilt quilt-11: edge tolerance = 5e-08
  Quilt quilt-12: edge tolerance = 5e-08
  Maximum DB edge tolerance = 5e-08
Performing model assembly pass on geometry entities.
domParams(MinEdge) defined as 1.000000e-07 due to model assembly tolerance
Looking for quilt names in geometry.
  Quilt list has 12 entries.
Quilt list has 12 entries.
Original connector list has 24 entries.
Minimum connector length = 1
Tolerance = 5e-08
Performing merge on connectors with equal dimensions and common end points.
After regular merge, connector list has 24 entries.
Updating conData
Min Edge Tol: 5.000e-08 on con-1
Max Edge Tol: 5.000e-08 on con-1
Adjusting connector dimensions based on average spacings.
Checking dimension for connector 1/24, name = con-1
Checking dimension for connector 2/24, name = con-2
Checking dimension for connector 3/24, name = con-3
Checking dimension for connector 4/24, name = con-4
Checking dimension for connector 5/24, name = con-5
Checking dimension for connector 6/24, name = con-6
Checking dimension for connector 7/24, name = con-7
Checking dimension for connector 8/24, name = con-8
Checking dimension for connector 9/24, name = con-9
Checking dimension for connector 10/24, name = con-11
Checking dimension for connector 11/24, name = con-13
Checking dimension for connector 12/24, name = con-15
Checking dimension for connector 13/24, name = con-16
  Changing dimension for connector 13/24 from 6 to 3
Checking dimension for connector 14/24, name = con-17
  Changing dimension for connector 14/24 from 6 to 3
Checking dimension for connector 15/24, name = con-18
  Changing dimension for connector 15/24 from 6 to 3
Checking dimension for connector 16/24, name = con-19
  Changing dimension for connector 16/24 from 6 to 3
Checking dimension for connector 17/24, name = con-20
  Changing dimension for connector 17/24 from 6 to 3
Checking dimension for connector 18/24, name = con-21
  Changing dimension for connector 18/24 from 6 to 3
Checking dimension for connector 19/24, name = con-22
  Changing dimension for connector 19/24 from 6 to 3
Checking dimension for connector 20/24, name = con-23
  Changing dimension for connector 20/24 from 6 to 3
Checking dimension for connector 21/24, name = con-24
Checking dimension for connector 22/24, name = con-26
Checking dimension for connector 23/24, name = con-28
Checking dimension for connector 24/24, name = con-30
Processing spacing values for connector 1/24, name = con-1
Processing spacing values for connector 2/24, name = con-2
Processing spacing values for connector 3/24, name = con-3
Processing spacing values for connector 4/24, name = con-4
Processing spacing values for connector 5/24, name = con-5
Processing spacing values for connector 6/24, name = con-6
Processing spacing values for connector 7/24, name = con-7
Processing spacing values for connector 8/24, name = con-8
Processing spacing values for connector 9/24, name = con-9
Processing spacing values for connector 10/24, name = con-11
Processing spacing values for connector 11/24, name = con-13
Processing spacing values for connector 12/24, name = con-15
Processing spacing values for connector 13/24, name = con-16
Processing spacing values for connector 14/24, name = con-17
Processing spacing values for connector 15/24, name = con-18
Processing spacing values for connector 16/24, name = con-19
Processing spacing values for connector 17/24, name = con-20
Processing spacing values for connector 18/24, name = con-21
Processing spacing values for connector 19/24, name = con-22
Processing spacing values for connector 20/24, name = con-23
Processing spacing values for connector 21/24, name = con-24
Processing spacing values for connector 22/24, name = con-26
Processing spacing values for connector 23/24, name = con-28
Processing spacing values for connector 24/24, name = con-30
Number of unique endpoints = 16
Checking for baffle intersections.
Performing Local Proximity Refinement
Adjusting connector dimensions based on proximity to other connectors.
  Proximity test for connector 1/24, con-1.
  Proximity test for connector 2/24, con-2.
  Proximity test for connector 3/24, con-3.
  Proximity test for connector 4/24, con-4.
  Proximity test for connector 5/24, con-5.
  Proximity test for connector 6/24, con-6.
  Proximity test for connector 7/24, con-7.
  Proximity test for connector 8/24, con-8.
  Proximity test for connector 9/24, con-9.
  Proximity test for connector 10/24, con-11.
  Proximity test for connector 11/24, con-13.
  Proximity test for connector 12/24, con-15.
  Proximity test for connector 13/24, con-16.
    Connector dimension changed from 3 to 8, avg. spacing changed from 2 to 0.571429
  Proximity test for connector 14/24, con-17.
    Connector dimension changed from 3 to 8, avg. spacing changed from 2 to 0.571429
  Proximity test for connector 15/24, con-18.
    Connector dimension changed from 3 to 8, avg. spacing changed from 2 to 0.571429
  Proximity test for connector 16/24, con-19.
    Connector dimension changed from 3 to 8, avg. spacing changed from 2 to 0.571429
  Proximity test for connector 17/24, con-20.
  Proximity test for connector 18/24, con-21.
  Proximity test for connector 19/24, con-22.
  Proximity test for connector 20/24, con-23.
  Proximity test for connector 21/24, con-24.
    Connector dimension changed from 6 to 8, avg. spacing changed from 3 to 2.14286
  Proximity test for connector 22/24, con-26.
    Connector dimension changed from 6 to 8, avg. spacing changed from 3 to 2.14286
  Proximity test for connector 23/24, con-28.
    Connector dimension changed from 6 to 8, avg. spacing changed from 3 to 2.14286
  Proximity test for connector 24/24, con-30.
    Connector dimension changed from 6 to 8, avg. spacing changed from 3 to 2.14286
Adjusting node spacing from geometry
con-2 Input connector dimension is a double = 2.00000000000000e+00 
Rounding to integer = 2
Adjusting connector dimensions based on end spacings.
Connector con-1 current dim = 6
Connector con-2 current dim = 6
Connector con-3 current dim = 6
Connector con-4 current dim = 6
Connector con-5 current dim = 6
Connector con-6 current dim = 6
Connector con-7 current dim = 6
Connector con-8 current dim = 6
Connector con-9 current dim = 6
Connector con-11 current dim = 6
Connector con-13 current dim = 6
Connector con-15 current dim = 6
Connector con-16 current dim = 8
Connector con-17 current dim = 8
Connector con-18 current dim = 8
Connector con-19 current dim = 8
Connector con-20 current dim = 3
Connector con-21 current dim = 3
Connector con-22 current dim = 3
Connector con-23 current dim = 3
Connector con-24 current dim = 8
Connector con-26 current dim = 8
Connector con-28 current dim = 8
Connector con-30 current dim = 8
Domain list has 12 entries.
Looking for periodic domain attributes from geometry.
  Tolerance = 5e-08
Number of periodic target domains = 0
Unstructured domain 1 of 12:
  boundary name = box.
    Creating boundary name box
Unstructured domain 2 of 12:
  boundary name = box.
    box already in boundary name list.
Unstructured domain 3 of 12:
  boundary name = box.
    box already in boundary name list.
Unstructured domain 4 of 12:
  boundary name = box.
    box already in boundary name list.
Unstructured domain 5 of 12:
  boundary name = box.
    box already in boundary name list.
Unstructured domain 6 of 12:
  boundary name = box.
    box already in boundary name list.
Unstructured domain 7 of 12:
  boundary name = farfield.
    Creating boundary name farfield
Unstructured domain 8 of 12:
  boundary name = farfield.
    farfield already in boundary name list.
Unstructured domain 9 of 12:
  boundary name = farfield.
    farfield already in boundary name list.
Unstructured domain 10 of 12:
  boundary name = farfield.
    farfield already in boundary name list.
Unstructured domain 11 of 12:
  boundary name = farfield.
    farfield already in boundary name list.
Unstructured domain 12 of 12:
  boundary name = farfield.
    farfield already in boundary name list.
Checking for blunt flag attribute on geometry faces.
Performing initialization pass on all unstructured domains.
Unstructured domain list for assembly has 12 entries.
Structured domain list for assembly has 0 entries.
Periodic target domain list for assembly has 0 entries.
Creating unstructured block from 12 domains.
Block = auto-blk
  Setting up unstructured block.
Retrieving block attributes from geometry.
  Initializing unstructured block.
CAE Solver set to UGRID
GeomToMesh finished!
Sat Oct 08 2022  6:09:53PM EDT
Run Time: 00 Hours 00 Minutes 01 Seconds
Pointwise save filename = caps.GeomToMesh.pw
Sat Oct 08 2022  6:09:53PM EDT
Exporting in UGRID format to file basename = caps.GeomToMesh
Mapped 72 / 72 curves to EGADS originals
GMA contains 24 edge groups
GMA contains 12 face groups
Wrote geometry-mesh associativity to caps.GeomToMesh.gma
GeomToMesh I/O finished!
Sat Oct 08 2022  6:09:54PM EDT
Export Time: 00 Hours 00 Minutes 01 Seconds
Volume mesh:
	Number of nodes          = 1197
	Number of elements       = 5973
	Number of triangles      = 832
	Number of quadrilatarals = 0
	Number of tetrahedrals   = 5973
	Number of pyramids       = 0
	Number of prisms         = 0
	Number of hexahedrals    = 0
Body = 1
	Number of nodes    = 230
	Number of elements = 456
	Number of tris = 456
	Number of quad = 0
Body = 2
	Number of nodes    = 190
	Number of elements = 376
	Number of tris = 376
	Number of quad = 0
No project name ("Proj_Name") provided - A volume mesh will not be written out
.
Analysis object with the name, pointwiseAIM, has already been initilized
An altName of pointwiseAIM_2 will be used!
Mapping capsGroup attributes ................
	Number of unique capsGroup attributes = 2
	Name = bullet, index = 1
	Name = farfield, index = 2
Mapping capsMesh attributes ................
	Number of unique capsMesh attributes = 0
Writing global Glyph inputs...
Writing egads file '/Users/jenkins/workspace/ESP_UndefinedCaps/7.4/CAPS/unit/DARWIN64/CAPS/legacy/aim/pyCAPS/__main__/Scratch/workDir_PointwiseTestBullet_pointwiseAIM/caps.egads'....


Running pointwise......
Number of command line arguments = 2
Sat Oct 08 2022  6:09:55PM EDT
Pointwise V18.5
Loading user defaults from capsUserDefaults.glf
GeomToMesh: Defaults
Connector level
    InitDim                  = 6
    MaxDim                   = 8
    MinDim                   = 3
    TurnAngle                = 0.000000
    Deviation                = 0.000000
    SplitAngle               = 0.000000
    JoinCons                 = 0
    ProxGrowthRate           = 1.300000
    SourceSpacing            = 0
    TurnAngleHard            = 70.000000
    EqualSpacing             = 0
Domain level
    Algorithm                = Delaunay
    FullLayers               = 0
    MaxLayers                = 0
    GrowthRate               = 1.300000
    IsoType                  = Triangle
    TRexType                 = Triangle
    TRexARLimit              = 200.000000
    TRexAngleBC              = 0.000000
    Decay                    = 0.500000
    MinEdge                  = 0.000000
    MaxEdge                  = 0.000000
    Adapt                    = 0
    WallSpacing              = 0.000000
    StrDomConvertARTrigger   = 0.000000
Block level
    Algorithm                = Delaunay
    VoxelLayers              = 3
    boundaryDecay            = 0.500000
    collisionBuffer          = 0.500000
    maxSkewAngle             = 180.000000
    TRexSkewDelay            = 0
    edgeMaxGrowthRate        = 1.800000
    fullLayers               = 0
    maxLayers                = 0
    growthRate               = 1.300000
    TRexType                 = TetPyramid
    volInitialize            = 1
General
    SkipMeshing              = 1
    CAESolver                = UGRID
    outerBoxScale            = 0
    sourceBoxLengthScale     = 0.000000
    sourceBoxDirection       =  1.000000 0.000000 0.000000 
    sourceBoxAngle           = 0.000000
    sourceGrowthFactor       = 10.000000
    sourcePCDFile            = 
    ModelSize                = 0
    writeGMA                 = 2.0
    assembleTolMult          = 2.0
    modelOrientIntMeshVolume = 1
Elevate On Export
    degree                   = Q1
    costThreshold            = 0.8
    maxIncAngle              = 175.0
    relax                    = 0.05
    smoothingPasses          = 1000
    WCNWeight                = 0.5
    WCNMode                  = Calculate
    writeVTU                 = false
CADFile = caps.egads
Determining model size from file.
Info: Model Size adjusted to 10
Computing maximum DB edge tolerance.
  Quilt list has 9 entries.
  Quilt quilt-1: edge tolerance = 5e-08
  Quilt quilt-2: edge tolerance = 2.40433e-07
  Quilt quilt-3: edge tolerance = 2.40433e-07
  Quilt quilt-4: edge tolerance = 5e-08
  Quilt quilt-5: edge tolerance = 5e-08
  Quilt quilt-6: edge tolerance = 5e-08
  Quilt quilt-7: edge tolerance = 5e-08
  Quilt quilt-8: edge tolerance = 5e-08
  Quilt quilt-9: edge tolerance = 5e-08
  Maximum DB edge tolerance = 2.40433e-07
Performing model assembly pass on geometry entities.
domParams(MinEdge) defined as 4.808651e-07 due to model assembly tolerance
Looking for quilt names in geometry.
  Quilt list has 9 entries.
Quilt list has 9 entries.
Original connector list has 16 entries.
Minimum connector length = 0.322396
Tolerance = 2.40433e-07
Performing merge on connectors with equal dimensions and common end points.
After regular merge, connector list has 16 entries.
Updating conData
Min Edge Tol: 5.000e-08 on con-6
Max Edge Tol: 2.404e-07 on con-3
Adjusting connector dimensions based on average spacings.
Checking dimension for connector 1/16, name = con-1
  Changing dimension for connector 1/16 from 6 to 3
Checking dimension for connector 2/16, name = con-2
Checking dimension for connector 3/16, name = con-3
Checking dimension for connector 4/16, name = con-5
  Changing dimension for connector 4/16 from 6 to 3
Checking dimension for connector 5/16, name = con-6
  Changing dimension for connector 5/16 from 6 to 3
Checking dimension for connector 6/16, name = con-7
  Changing dimension for connector 6/16 from 6 to 3
Checking dimension for connector 7/16, name = con-8
  Changing dimension for connector 7/16 from 6 to 3
Checking dimension for connector 8/16, name = con-9
  Changing dimension for connector 8/16 from 6 to 3
Checking dimension for connector 9/16, name = con-10
  Changing dimension for connector 9/16 from 6 to 3
Checking dimension for connector 10/16, name = con-11
  Changing dimension for connector 10/16 from 6 to 3
Checking dimension for connector 11/16, name = con-12
  Changing dimension for connector 11/16 from 6 to 3
Checking dimension for connector 12/16, name = con-13
  Changing dimension for connector 12/16 from 6 to 3
Checking dimension for connector 13/16, name = con-14
Checking dimension for connector 14/16, name = con-16
Checking dimension for connector 15/16, name = con-18
Checking dimension for connector 16/16, name = con-20
Processing spacing values for connector 1/16, name = con-1
Processing spacing values for connector 2/16, name = con-2
Processing spacing values for connector 3/16, name = con-3
Processing spacing values for connector 4/16, name = con-5
Processing spacing values for connector 5/16, name = con-6
Processing spacing values for connector 6/16, name = con-7
Processing spacing values for connector 7/16, name = con-8
Processing spacing values for connector 8/16, name = con-9
Processing spacing values for connector 9/16, name = con-10
Processing spacing values for connector 10/16, name = con-11
Processing spacing values for connector 11/16, name = con-12
Processing spacing values for connector 12/16, name = con-13
Processing spacing values for connector 13/16, name = con-14
Processing spacing values for connector 14/16, name = con-16
Processing spacing values for connector 15/16, name = con-18
Processing spacing values for connector 16/16, name = con-20
Number of unique endpoints = 11
Checking for baffle intersections.
Performing Local Proximity Refinement
Adjusting connector dimensions based on proximity to other connectors.
  Proximity test for connector 1/16, con-1.
  Proximity test for connector 2/16, con-2.
    Connector dimension changed from 6 to 8, avg. spacing changed from 0.301819 to 0.215585
  Proximity test for connector 3/16, con-3.
    Connector dimension changed from 6 to 8, avg. spacing changed from 0.628319 to 0.448799
  Proximity test for connector 4/16, con-5.
    Connector dimension changed from 3 to 7, avg. spacing changed from 0.589734 to 0.196578
  Proximity test for connector 5/16, con-6.
    Connector dimension changed from 3 to 4, avg. spacing changed from 2 to 1.33333
  Proximity test for connector 6/16, con-7.
    Connector dimension changed from 3 to 4, avg. spacing changed from 2 to 1.33333
  Proximity test for connector 7/16, con-8.
    Connector dimension changed from 3 to 4, avg. spacing changed from 2 to 1.33333
  Proximity test for connector 8/16, con-9.
    Connector dimension changed from 3 to 4, avg. spacing changed from 2 to 1.33333
  Proximity test for connector 9/16, con-10.
    Connector dimension changed from 3 to 8, avg. spacing changed from 2 to 0.571429
  Proximity test for connector 10/16, con-11.
    Connector dimension changed from 3 to 8, avg. spacing changed from 2 to 0.571429
  Proximity test for connector 11/16, con-12.
    Connector dimension changed from 3 to 8, avg. spacing changed from 2 to 0.571429
  Proximity test for connector 12/16, con-13.
    Connector dimension changed from 3 to 8, avg. spacing changed from 2 to 0.571429
  Proximity test for connector 13/16, con-14.
    Connector dimension changed from 6 to 8, avg. spacing changed from 3 to 2.14286
  Proximity test for connector 14/16, con-16.
    Connector dimension changed from 6 to 8, avg. spacing changed from 3 to 2.14286
  Proximity test for connector 15/16, con-18.
    Connector dimension changed from 6 to 8, avg. spacing changed from 3 to 2.14286
  Proximity test for connector 16/16, con-20.
    Connector dimension changed from 6 to 8, avg. spacing changed from 3 to 2.14286
Adjusting node spacing from geometry
Adjusting connector dimensions based on end spacings.
Connector con-1 current dim = 3
Connector con-2 current dim = 8
Connector con-3 current dim = 8
Connector con-5 current dim = 7
Connector con-6 current dim = 4
Connector con-7 current dim = 4
Connector con-8 current dim = 4
Connector con-9 current dim = 4
Connector con-10 current dim = 8
Connector con-11 current dim = 8
Connector con-12 current dim = 8
Connector con-13 current dim = 8
Connector con-14 current dim = 8
Connector con-16 current dim = 8
Connector con-18 current dim = 8
Connector con-20 current dim = 8
Domain list has 9 entries.
Looking for periodic domain attributes from geometry.
  Tolerance = 2.40433e-07
Number of periodic target domains = 0
Unstructured domain 1 of 9:
  boundary name = bullet.
    Creating boundary name bullet
Unstructured domain 2 of 9:
  boundary name = bullet.
    bullet already in boundary name list.
Unstructured domain 3 of 9:
  boundary name = bullet.
    bullet already in boundary name list.
Unstructured domain 4 of 9:
  boundary name = farfield.
    Creating boundary name farfield
Unstructured domain 5 of 9:
  boundary name = farfield.
    farfield already in boundary name list.
Unstructured domain 6 of 9:
  boundary name = farfield.
    farfield already in boundary name list.
Unstructured domain 7 of 9:
  boundary name = farfield.
    farfield already in boundary name list.
Unstructured domain 8 of 9:
  boundary name = farfield.
    farfield already in boundary name list.
Unstructured domain 9 of 9:
  boundary name = farfield.
    farfield already in boundary name list.
Checking for blunt flag attribute on geometry faces.
Performing initialization pass on all unstructured domains.
Unstructured domain list for assembly has 9 entries.
Structured domain list for assembly has 0 entries.
Periodic target domain list for assembly has 0 entries.
Creating unstructured block from 9 domains.
Block = auto-blk
  Setting up unstructured block.
Retrieving block attributes from geometry.
  Initializing unstructured block.
CAE Solver set to UGRID
GeomToMesh finished!
Sat Oct 08 2022  6:09:57PM EDT
Run Time: 00 Hours 00 Minutes 02 Seconds
Pointwise save filename = caps.GeomToMesh.pw
Sat Oct 08 2022  6:09:57PM EDT
Exporting in UGRID format to file basename = caps.GeomToMesh
Mapped 48 / 48 curves to EGADS originals
GMA contains 16 edge groups
GMA contains 9 face groups
Wrote geometry-mesh associativity to caps.GeomToMesh.gma
GeomToMesh I/O finished!
Sat Oct 08 2022  6:09:57PM EDT
Export Time: 00 Hours 00 Minutes 00 Seconds
Volume mesh:
	Number of nodes          = 846
	Number of elements       = 4242
	Number of triangles      = 536
	Number of quadrilatarals = 0
	Number of tetrahedrals   = 4242
	Number of pyramids       = 0
	Number of prisms         = 0
	Number of hexahedrals    = 0
Body = 1
	Number of nodes    = 69
	Number of elements = 134
	Number of tris = 134
	Number of quad = 0
Body = 2
	Number of nodes    = 203
	Number of elements = 402
	Number of tris = 402
	Number of quad = 0
No project name ("Proj_Name") provided - A volume mesh will not be written out
.
Analysis object with the name, pointwiseAIM, has already been initilized
An altName of pointwiseAIM_3 will be used!
Mapping capsGroup attributes ................
	Number of unique capsGroup attributes = 2
	Name = cone, index = 1
	Name = farfield, index = 2
Mapping capsMesh attributes ................
	Number of unique capsMesh attributes = 0
Writing global Glyph inputs...
Writing egads file '/Users/jenkins/workspace/ESP_UndefinedCaps/7.4/CAPS/unit/DARWIN64/CAPS/legacy/aim/pyCAPS/__main__/Scratch/workDir_PointwiseTestCone_pointwiseAIM/caps.egads'....


Running pointwise......
Number of command line arguments = 2
Sat Oct 08 2022  6:09:59PM EDT
Pointwise V18.5
Loading user defaults from capsUserDefaults.glf
GeomToMesh: Defaults
Connector level
    InitDim                  = 6
    MaxDim                   = 8
    MinDim                   = 3
    TurnAngle                = 0.000000
    Deviation                = 0.000000
    SplitAngle               = 0.000000
    JoinCons                 = 0
    ProxGrowthRate           = 1.300000
    SourceSpacing            = 0
    TurnAngleHard            = 70.000000
    EqualSpacing             = 0
Domain level
    Algorithm                = Delaunay
    FullLayers               = 0
    MaxLayers                = 0
    GrowthRate               = 1.300000
    IsoType                  = Triangle
    TRexType                 = Triangle
    TRexARLimit              = 200.000000
    TRexAngleBC              = 0.000000
    Decay                    = 0.500000
    MinEdge                  = 0.000000
    MaxEdge                  = 0.000000
    Adapt                    = 0
    WallSpacing              = 0.000000
    StrDomConvertARTrigger   = 0.000000
Block level
    Algorithm                = Delaunay
    VoxelLayers              = 3
    boundaryDecay            = 0.500000
    collisionBuffer          = 0.500000
    maxSkewAngle             = 180.000000
    TRexSkewDelay            = 0
    edgeMaxGrowthRate        = 1.800000
    fullLayers               = 0
    maxLayers                = 0
    growthRate               = 1.300000
    TRexType                 = TetPyramid
    volInitialize            = 1
General
    SkipMeshing              = 1
    CAESolver                = UGRID
    outerBoxScale            = 0
    sourceBoxLengthScale     = 0.000000
    sourceBoxDirection       =  1.000000 0.000000 0.000000 
    sourceBoxAngle           = 0.000000
    sourceGrowthFactor       = 10.000000
    sourcePCDFile            = 
    ModelSize                = 0
    writeGMA                 = 2.0
    assembleTolMult          = 2.0
    modelOrientIntMeshVolume = 1
Elevate On Export
    degree                   = Q1
    costThreshold            = 0.8
    maxIncAngle              = 175.0
    relax                    = 0.05
    smoothingPasses          = 1000
    WCNWeight                = 0.5
    WCNMode                  = Calculate
    writeVTU                 = false
CADFile = caps.egads
Determining model size from file.
Info: Model Size adjusted to 10
Computing maximum DB edge tolerance.
  Quilt list has 9 entries.
  Quilt quilt-1: edge tolerance = 2.76559e-06
  Quilt quilt-2: edge tolerance = 2.76559e-06
  Quilt quilt-3: edge tolerance = 2.76559e-06
  Quilt quilt-4: edge tolerance = 5e-08
  Quilt quilt-5: edge tolerance = 5e-08
  Quilt quilt-6: edge tolerance = 5e-08
  Quilt quilt-7: edge tolerance = 5e-08
  Quilt quilt-8: edge tolerance = 5e-08
  Quilt quilt-9: edge tolerance = 5e-08
  Maximum DB edge tolerance = 2.76559e-06
Performing model assembly pass on geometry entities.
domParams(MinEdge) defined as 5.531178e-06 due to model assembly tolerance
Looking for quilt names in geometry.
  Quilt list has 9 entries.
Quilt list has 9 entries.
Original connector list has 16 entries.
Minimum connector length = 1.11803
Tolerance = 2.76559e-06
Performing merge on connectors with equal dimensions and common end points.
After regular merge, connector list has 16 entries.
Updating conData
Min Edge Tol: 5.000e-08 on con-6
Max Edge Tol: 2.766e-06 on con-1
Adjusting connector dimensions based on average spacings.
Checking dimension for connector 1/16, name = con-1
Checking dimension for connector 2/16, name = con-2
  Changing dimension for connector 2/16 from 6 to 3
Checking dimension for connector 3/16, name = con-3
  Changing dimension for connector 3/16 from 6 to 3
Checking dimension for connector 4/16, name = con-5
Checking dimension for connector 5/16, name = con-6
  Changing dimension for connector 5/16 from 6 to 3
Checking dimension for connector 6/16, name = con-7
  Changing dimension for connector 6/16 from 6 to 3
Checking dimension for connector 7/16, name = con-8
  Changing dimension for connector 7/16 from 6 to 3
Checking dimension for connector 8/16, name = con-9
  Changing dimension for connector 8/16 from 6 to 3
Checking dimension for connector 9/16, name = con-10
  Changing dimension for connector 9/16 from 6 to 3
Checking dimension for connector 10/16, name = con-11
  Changing dimension for connector 10/16 from 6 to 3
Checking dimension for connector 11/16, name = con-12
  Changing dimension for connector 11/16 from 6 to 3
Checking dimension for connector 12/16, name = con-13
  Changing dimension for connector 12/16 from 6 to 3
Checking dimension for connector 13/16, name = con-14
Checking dimension for connector 14/16, name = con-16
Checking dimension for connector 15/16, name = con-18
Checking dimension for connector 16/16, name = con-20
Processing spacing values for connector 1/16, name = con-1
Processing spacing values for connector 2/16, name = con-2
Processing spacing values for connector 3/16, name = con-3
Processing spacing values for connector 4/16, name = con-5
Processing spacing values for connector 5/16, name = con-6
Processing spacing values for connector 6/16, name = con-7
Processing spacing values for connector 7/16, name = con-8
Processing spacing values for connector 8/16, name = con-9
Processing spacing values for connector 9/16, name = con-10
Processing spacing values for connector 10/16, name = con-11
Processing spacing values for connector 11/16, name = con-12
Processing spacing values for connector 12/16, name = con-13
Processing spacing values for connector 13/16, name = con-14
Processing spacing values for connector 14/16, name = con-16
Processing spacing values for connector 15/16, name = con-18
Processing spacing values for connector 16/16, name = con-20
Number of unique endpoints = 11
Checking for baffle intersections.
Performing Local Proximity Refinement
Adjusting connector dimensions based on proximity to other connectors.
  Proximity test for connector 1/16, con-1.
  Proximity test for connector 2/16, con-2.
    Connector dimension changed from 3 to 5, avg. spacing changed from 0.559017 to 0.279508
  Proximity test for connector 3/16, con-3.
    Connector dimension changed from 3 to 5, avg. spacing changed from 0.559017 to 0.279508
  Proximity test for connector 4/16, con-5.
    Connector dimension changed from 6 to 6, avg. spacing changed from 0.314159 to 0.314159
  Proximity test for connector 5/16, con-6.
    Connector dimension changed from 3 to 5, avg. spacing changed from 2 to 1
  Proximity test for connector 6/16, con-7.
    Connector dimension changed from 3 to 5, avg. spacing changed from 2 to 1
  Proximity test for connector 7/16, con-8.
    Connector dimension changed from 3 to 5, avg. spacing changed from 2 to 1
  Proximity test for connector 8/16, con-9.
    Connector dimension changed from 3 to 5, avg. spacing changed from 2 to 1
  Proximity test for connector 9/16, con-10.
    Connector dimension changed from 3 to 4, avg. spacing changed from 2 to 1.33333
  Proximity test for connector 10/16, con-11.
    Connector dimension changed from 3 to 4, avg. spacing changed from 2 to 1.33333
  Proximity test for connector 11/16, con-12.
    Connector dimension changed from 3 to 4, avg. spacing changed from 2 to 1.33333
  Proximity test for connector 12/16, con-13.
    Connector dimension changed from 3 to 4, avg. spacing changed from 2 to 1.33333
  Proximity test for connector 13/16, con-14.
    Connector dimension changed from 6 to 8, avg. spacing changed from 3 to 2.14286
  Proximity test for connector 14/16, con-16.
    Connector dimension changed from 6 to 8, avg. spacing changed from 3 to 2.14286
  Proximity test for connector 15/16, con-18.
    Connector dimension changed from 6 to 8, avg. spacing changed from 3 to 2.14286
  Proximity test for connector 16/16, con-20.
    Connector dimension changed from 6 to 8, avg. spacing changed from 3 to 2.14286
Adjusting node spacing from geometry
Adjusting connector dimensions based on end spacings.
Connector con-1 current dim = 6
Connector con-2 current dim = 5
Connector con-3 current dim = 5
Connector con-5 current dim = 6
Connector con-6 current dim = 5
Connector con-7 current dim = 5
Connector con-8 current dim = 5
Connector con-9 current dim = 5
Connector con-10 current dim = 4
Connector con-11 current dim = 4
Connector con-12 current dim = 4
Connector con-13 current dim = 4
Connector con-14 current dim = 8
Connector con-16 current dim = 8
Connector con-18 current dim = 8
Connector con-20 current dim = 8
Domain list has 9 entries.
Looking for periodic domain attributes from geometry.
  Tolerance = 2.76559e-06
Number of periodic target domains = 0
Unstructured domain 1 of 9:
  boundary name = cone.
    Creating boundary name cone
Unstructured domain 2 of 9:
  boundary name = cone.
    cone already in boundary name list.
Unstructured domain 3 of 9:
  boundary name = cone.
    cone already in boundary name list.
Unstructured domain 4 of 9:
  boundary name = farfield.
    Creating boundary name farfield
Unstructured domain 5 of 9:
  boundary name = farfield.
    farfield already in boundary name list.
Unstructured domain 6 of 9:
  boundary name = farfield.
    farfield already in boundary name list.
Unstructured domain 7 of 9:
  boundary name = farfield.
    farfield already in boundary name list.
Unstructured domain 8 of 9:
  boundary name = farfield.
    farfield already in boundary name list.
Unstructured domain 9 of 9:
  boundary name = farfield.
    farfield already in boundary name list.
Checking for blunt flag attribute on geometry faces.
Performing initialization pass on all unstructured domains.
Unstructured domain list for assembly has 9 entries.
Structured domain list for assembly has 0 entries.
Periodic target domain list for assembly has 0 entries.
Creating unstructured block from 9 domains.
Block = auto-blk
  Setting up unstructured block.
Retrieving block attributes from geometry.
  Initializing unstructured block.
CAE Solver set to UGRID
GeomToMesh finished!
Sat Oct 08 2022  6:10:00PM EDT
Run Time: 00 Hours 00 Minutes 01 Seconds
Pointwise save filename = caps.GeomToMesh.pw
Sat Oct 08 2022  6:10:00PM EDT
Exporting in UGRID format to file basename = caps.GeomToMesh
Mapped 48 / 48 curves to EGADS originals
GMA contains 16 edge groups
GMA contains 9 face groups
Wrote geometry-mesh associativity to caps.GeomToMesh.gma
GeomToMesh I/O finished!
Sat Oct 08 2022  6:10:00PM EDT
Export Time: 00 Hours 00 Minutes 00 Seconds
Volume mesh:
	Number of nodes          = 572
	Number of elements       = 2826
	Number of triangles      = 340
	Number of quadrilatarals = 0
	Number of tetrahedrals   = 2826
	Number of pyramids       = 0
	Number of prisms         = 0
	Number of hexahedrals    = 0
Body = 1
	Number of nodes    = 42
	Number of elements = 80
	Number of tris = 80
	Number of quad = 0
Body = 2
	Number of nodes    = 132
	Number of elements = 260
	Number of tris = 260
	Number of quad = 0
No project name ("Proj_Name") provided - A volume mesh will not be written out
.
Analysis object with the name, pointwiseAIM, has already been initilized
An altName of pointwiseAIM_4 will be used!
Mapping capsGroup attributes ................
	Number of unique capsGroup attributes = 2
	Name = cylinder, index = 1
	Name = farfield, index = 2
Mapping capsMesh attributes ................
	Number of unique capsMesh attributes = 0
Writing global Glyph inputs...
Writing egads file '/Users/jenkins/workspace/ESP_UndefinedCaps/7.4/CAPS/unit/DARWIN64/CAPS/legacy/aim/pyCAPS/__main__/Scratch/workDir_PointwiseTestCylinder_pointwiseAIM/caps.egads'....


Running pointwise......
Number of command line arguments = 2
Sat Oct 08 2022  6:10:02PM EDT
Pointwise V18.5
Loading user defaults from capsUserDefaults.glf
GeomToMesh: Defaults
Connector level
    InitDim                  = 6
    MaxDim                   = 8
    MinDim                   = 3
    TurnAngle                = 0.000000
    Deviation                = 0.000000
    SplitAngle               = 0.000000
    JoinCons                 = 0
    ProxGrowthRate           = 1.300000
    SourceSpacing            = 0
    TurnAngleHard            = 70.000000
    EqualSpacing             = 0
Domain level
    Algorithm                = Delaunay
    FullLayers               = 0
    MaxLayers                = 0
    GrowthRate               = 1.300000
    IsoType                  = Triangle
    TRexType                 = Triangle
    TRexARLimit              = 200.000000
    TRexAngleBC              = 0.000000
    Decay                    = 0.500000
    MinEdge                  = 0.000000
    MaxEdge                  = 0.000000
    Adapt                    = 0
    WallSpacing              = 0.000000
    StrDomConvertARTrigger   = 0.000000
Block level
    Algorithm                = Delaunay
    VoxelLayers              = 3
    boundaryDecay            = 0.500000
    collisionBuffer          = 0.500000
    maxSkewAngle             = 180.000000
    TRexSkewDelay            = 0
    edgeMaxGrowthRate        = 1.800000
    fullLayers               = 0
    maxLayers                = 0
    growthRate               = 1.300000
    TRexType                 = TetPyramid
    volInitialize            = 1
General
    SkipMeshing              = 1
    CAESolver                = UGRID
    outerBoxScale            = 0
    sourceBoxLengthScale     = 0.000000
    sourceBoxDirection       =  1.000000 0.000000 0.000000 
    sourceBoxAngle           = 0.000000
    sourceGrowthFactor       = 10.000000
    sourcePCDFile            = 
    ModelSize                = 0
    writeGMA                 = 2.0
    assembleTolMult          = 2.0
    modelOrientIntMeshVolume = 1
Elevate On Export
    degree                   = Q1
    costThreshold            = 0.8
    maxIncAngle              = 175.0
    relax                    = 0.05
    smoothingPasses          = 1000
    WCNWeight                = 0.5
    WCNMode                  = Calculate
    writeVTU                 = false
CADFile = caps.egads
Determining model size from file.
Info: Model Size adjusted to 10
Computing maximum DB edge tolerance.
  Quilt list has 9 entries.
  Quilt quilt-1: edge tolerance = 2.40432e-07
  Quilt quilt-2: edge tolerance = 2.40432e-07
  Quilt quilt-3: edge tolerance = 2.40432e-07
  Quilt quilt-4: edge tolerance = 5e-08
  Quilt quilt-5: edge tolerance = 5e-08
  Quilt quilt-6: edge tolerance = 5e-08
  Quilt quilt-7: edge tolerance = 5e-08
  Quilt quilt-8: edge tolerance = 5e-08
  Quilt quilt-9: edge tolerance = 5e-08
  Maximum DB edge tolerance = 2.40432e-07
Performing model assembly pass on geometry entities.
domParams(MinEdge) defined as 4.808648e-07 due to model assembly tolerance
Looking for quilt names in geometry.
  Quilt list has 9 entries.
Quilt list has 9 entries.
Original connector list has 15 entries.
Minimum connector length = 1
Tolerance = 2.40432e-07
Performing merge on connectors with equal dimensions and common end points.
After regular merge, connector list has 15 entries.
Updating conData
Min Edge Tol: 5.000e-08 on con-5
Max Edge Tol: 2.404e-07 on con-1
Adjusting connector dimensions based on average spacings.
Checking dimension for connector 1/15, name = con-1
Checking dimension for connector 2/15, name = con-2
Checking dimension for connector 3/15, name = con-4
  Changing dimension for connector 3/15 from 6 to 3
Checking dimension for connector 4/15, name = con-5
  Changing dimension for connector 4/15 from 6 to 3
Checking dimension for connector 5/15, name = con-6
  Changing dimension for connector 5/15 from 6 to 3
Checking dimension for connector 6/15, name = con-7
  Changing dimension for connector 6/15 from 6 to 3
Checking dimension for connector 7/15, name = con-8
  Changing dimension for connector 7/15 from 6 to 3
Checking dimension for connector 8/15, name = con-9
  Changing dimension for connector 8/15 from 6 to 3
Checking dimension for connector 9/15, name = con-10
  Changing dimension for connector 9/15 from 6 to 3
Checking dimension for connector 10/15, name = con-11
  Changing dimension for connector 10/15 from 6 to 3
Checking dimension for connector 11/15, name = con-12
  Changing dimension for connector 11/15 from 6 to 3
Checking dimension for connector 12/15, name = con-13
Checking dimension for connector 13/15, name = con-15
Checking dimension for connector 14/15, name = con-17
Checking dimension for connector 15/15, name = con-19
Processing spacing values for connector 1/15, name = con-1
Processing spacing values for connector 2/15, name = con-2
Processing spacing values for connector 3/15, name = con-4
Processing spacing values for connector 4/15, name = con-5
Processing spacing values for connector 5/15, name = con-6
Processing spacing values for connector 6/15, name = con-7
Processing spacing values for connector 7/15, name = con-8
Processing spacing values for connector 8/15, name = con-9
Processing spacing values for connector 9/15, name = con-10
Processing spacing values for connector 10/15, name = con-11
Processing spacing values for connector 11/15, name = con-12
Processing spacing values for connector 12/15, name = con-13
Processing spacing values for connector 13/15, name = con-15
Processing spacing values for connector 14/15, name = con-17
Processing spacing values for connector 15/15, name = con-19
Number of unique endpoints = 10
Checking for baffle intersections.
Performing Local Proximity Refinement
Adjusting connector dimensions based on proximity to other connectors.
  Proximity test for connector 1/15, con-1.
    Connector dimension changed from 6 to 8, avg. spacing changed from 0.628319 to 0.448799
  Proximity test for connector 2/15, con-2.
    Connector dimension changed from 6 to 8, avg. spacing changed from 0.628319 to 0.448799
  Proximity test for connector 3/15, con-4.
  Proximity test for connector 4/15, con-5.
    Connector dimension changed from 3 to 6, avg. spacing changed from 2 to 0.8
  Proximity test for connector 5/15, con-6.
    Connector dimension changed from 3 to 6, avg. spacing changed from 2 to 0.8
  Proximity test for connector 6/15, con-7.
    Connector dimension changed from 3 to 6, avg. spacing changed from 2 to 0.8
  Proximity test for connector 7/15, con-8.
    Connector dimension changed from 3 to 6, avg. spacing changed from 2 to 0.8
  Proximity test for connector 8/15, con-9.
    Connector dimension changed from 3 to 4, avg. spacing changed from 2 to 1.33333
  Proximity test for connector 9/15, con-10.
    Connector dimension changed from 3 to 4, avg. spacing changed from 2 to 1.33333
  Proximity test for connector 10/15, con-11.
    Connector dimension changed from 3 to 4, avg. spacing changed from 2 to 1.33333
  Proximity test for connector 11/15, con-12.
    Connector dimension changed from 3 to 4, avg. spacing changed from 2 to 1.33333
  Proximity test for connector 12/15, con-13.
    Connector dimension changed from 6 to 8, avg. spacing changed from 3 to 2.14286
  Proximity test for connector 13/15, con-15.
    Connector dimension changed from 6 to 8, avg. spacing changed from 3 to 2.14286
  Proximity test for connector 14/15, con-17.
    Connector dimension changed from 6 to 8, avg. spacing changed from 3 to 2.14286
  Proximity test for connector 15/15, con-19.
    Connector dimension changed from 6 to 8, avg. spacing changed from 3 to 2.14286
Adjusting node spacing from geometry
Adjusting connector dimensions based on end spacings.
Connector con-1 current dim = 8
Connector con-2 current dim = 8
Connector con-4 current dim = 3
Connector con-5 current dim = 6
Connector con-6 current dim = 6
Connector con-7 current dim = 6
Connector con-8 current dim = 6
Connector con-9 current dim = 4
Connector con-10 current dim = 4
Connector con-11 current dim = 4
Connector con-12 current dim = 4
Connector con-13 current dim = 8
Connector con-15 current dim = 8
Connector con-17 current dim = 8
Connector con-19 current dim = 8
Domain list has 9 entries.
Looking for periodic domain attributes from geometry.
  Tolerance = 2.40432e-07
Number of periodic target domains = 0
Unstructured domain 1 of 9:
  boundary name = cylinder.
    Creating boundary name cylinder
Unstructured domain 2 of 9:
  boundary name = cylinder.
    cylinder already in boundary name list.
Unstructured domain 3 of 9:
  boundary name = cylinder.
    cylinder already in boundary name list.
Unstructured domain 4 of 9:
  boundary name = farfield.
    Creating boundary name farfield
Unstructured domain 5 of 9:
  boundary name = farfield.
    farfield already in boundary name list.
Unstructured domain 6 of 9:
  boundary name = farfield.
    farfield already in boundary name list.
Unstructured domain 7 of 9:
  boundary name = farfield.
    farfield already in boundary name list.
Unstructured domain 8 of 9:
  boundary name = farfield.
    farfield already in boundary name list.
Unstructured domain 9 of 9:
  boundary name = farfield.
    farfield already in boundary name list.
Checking for blunt flag attribute on geometry faces.
Performing initialization pass on all unstructured domains.
Unstructured domain list for assembly has 9 entries.
Structured domain list for assembly has 0 entries.
Periodic target domain list for assembly has 0 entries.
Creating unstructured block from 9 domains.
Block = auto-blk
  Setting up unstructured block.
Retrieving block attributes from geometry.
  Initializing unstructured block.
CAE Solver set to UGRID
GeomToMesh finished!
Sat Oct 08 2022  6:10:03PM EDT
Run Time: 00 Hours 00 Minutes 01 Seconds
Pointwise save filename = caps.GeomToMesh.pw
Sat Oct 08 2022  6:10:03PM EDT
Exporting in UGRID format to file basename = caps.GeomToMesh
Mapped 45 / 45 curves to EGADS originals
GMA contains 15 edge groups
GMA contains 9 face groups
Wrote geometry-mesh associativity to caps.GeomToMesh.gma
GeomToMesh I/O finished!
Sat Oct 08 2022  6:10:04PM EDT
Export Time: 00 Hours 00 Minutes 01 Seconds
Volume mesh:
	Number of nodes          = 452
	Number of elements       = 2053
	Number of triangles      = 386
	Number of quadrilatarals = 0
	Number of tetrahedrals   = 2053
	Number of pyramids       = 0
	Number of prisms         = 0
	Number of hexahedrals    = 0
Body = 1
	Number of nodes    = 38
	Number of elements = 72
	Number of tris = 72
	Number of quad = 0
Body = 2
	Number of nodes    = 159
	Number of elements = 314
	Number of tris = 314
	Number of quad = 0
No project name ("Proj_Name") provided - A volume mesh will not be written out
.
Analysis object with the name, pointwiseAIM, has already been initilized
An altName of pointwiseAIM_5 will be used!
Mapping capsGroup attributes ................
	Number of unique capsGroup attributes = 2
	Name = box, index = 1
	Name = farfield, index = 2
Mapping capsMesh attributes ................
	Number of unique capsMesh attributes = 0
Writing global Glyph inputs...
Writing egads file '/Users/jenkins/workspace/ESP_UndefinedCaps/7.4/CAPS/unit/DARWIN64/CAPS/legacy/aim/pyCAPS/__main__/Scratch/workDir_PointwiseTestBoxError_pointwiseAIM/caps.egads'....
.Mapping capsGroup attributes ................
	Number of unique capsGroup attributes = 2
	Name = Farfield, index = 1
	Name = Wing1, index = 2
Mapping capsMesh attributes ................
	Number of unique capsMesh attributes = 2
	Name = Farfield, index = 1
	Name = Wing1, index = 2
Writing global Glyph inputs...
Writing egads file '/Users/jenkins/workspace/ESP_UndefinedCaps/7.4/CAPS/unit/DARWIN64/CAPS/legacy/aim/pyCAPS/workDir_PointwiseTest3/Scratch/workDir_PointwiseTestSingleBody2_pointwiseAIM/caps.egads'....


Running pointwise......
Number of command line arguments = 2
Sat Oct 08 2022  6:10:06PM EDT
Pointwise V18.5
Loading user defaults from capsUserDefaults.glf
GeomToMesh: Defaults
Connector level
    InitDim                  = 10
    MaxDim                   = 12
    MinDim                   = 3
    TurnAngle                = 0.000000
    Deviation                = 0.000000
    SplitAngle               = 0.000000
    JoinCons                 = 0
    ProxGrowthRate           = 1.300000
    SourceSpacing            = 0
    TurnAngleHard            = 70.000000
    EqualSpacing             = 0
Domain level
    Algorithm                = Delaunay
    FullLayers               = 0
    MaxLayers                = 0
    GrowthRate               = 1.300000
    IsoType                  = Triangle
    TRexType                 = Triangle
    TRexARLimit              = 200.000000
    TRexAngleBC              = 0.000000
    Decay                    = 0.500000
    MinEdge                  = 0.000000
    MaxEdge                  = 0.000000
    Adapt                    = 0
    WallSpacing              = 0.000000
    StrDomConvertARTrigger   = 0.000000
Block level
    Algorithm                = Delaunay
    VoxelLayers              = 3
    boundaryDecay            = 0.500000
    collisionBuffer          = 0.500000
    maxSkewAngle             = 180.000000
    TRexSkewDelay            = 0
    edgeMaxGrowthRate        = 1.800000
    fullLayers               = 0
    maxLayers                = 0
    growthRate               = 1.300000
    TRexType                 = TetPyramid
    volInitialize            = 1
General
    SkipMeshing              = 1
    CAESolver                = UGRID
    outerBoxScale            = 0
    sourceBoxLengthScale     = 0.000000
    sourceBoxDirection       =  1.000000 0.000000 0.000000 
    sourceBoxAngle           = 0.000000
    sourceGrowthFactor       = 10.000000
    sourcePCDFile            = 
    ModelSize                = 0
    writeGMA                 = 2.0
    assembleTolMult          = 2.0
    modelOrientIntMeshVolume = 1
Elevate On Export
    degree                   = Q1
    costThreshold            = 0.8
    maxIncAngle              = 175.0
    relax                    = 0.05
    smoothingPasses          = 1000
    WCNWeight                = 0.5
    WCNMode                  = Calculate
    writeVTU                 = false
CADFile = caps.egads
Determining model size from file.
Info: Model Size adjusted to 100
Computing maximum DB edge tolerance.
  Quilt list has 14 entries.
  Quilt quilt-1: edge tolerance = 5e-07
  Quilt quilt-2: edge tolerance = 5e-07
  Quilt quilt-3: edge tolerance = 5e-07
  Quilt quilt-4: edge tolerance = 5e-07
  Quilt quilt-5: edge tolerance = 5e-07
  Quilt quilt-6: edge tolerance = 5e-07
  Quilt quilt-7: edge tolerance = 6.19984e-05
  Quilt quilt-8: edge tolerance = 6.19984e-05
  Quilt quilt-9: edge tolerance = 6.19984e-05
  Quilt quilt-10: edge tolerance = 6.19984e-05
  Quilt quilt-11: edge tolerance = 6.19984e-05
  Quilt quilt-12: edge tolerance = 6.19984e-05
  Quilt quilt-13: edge tolerance = 6.19984e-05
  Quilt quilt-14: edge tolerance = 6.19984e-05
  Maximum DB edge tolerance = 6.19984e-05
Performing model assembly pass on geometry entities.
domParams(MinEdge) defined as 1.239969e-04 due to model assembly tolerance
Looking for quilt names in geometry.
  Quilt list has 14 entries.
Quilt list has 14 entries.
Original connector list has 27 entries.
Minimum connector length = 0.00791958
Tolerance = 6.19984e-05
Performing merge on connectors with equal dimensions and common end points.
After regular merge, connector list has 27 entries.
Updating conData
Min Edge Tol: 5.000e-07 on con-1
Max Edge Tol: 6.200e-05 on con-20
Adjusting connector dimensions based on average spacings.
Checking dimension for connector 1/27, name = con-1
Checking dimension for connector 2/27, name = con-2
Checking dimension for connector 3/27, name = con-3
Checking dimension for connector 4/27, name = con-4
Checking dimension for connector 5/27, name = con-5
Checking dimension for connector 6/27, name = con-6
Checking dimension for connector 7/27, name = con-7
Checking dimension for connector 8/27, name = con-8
Checking dimension for connector 9/27, name = con-9
Checking dimension for connector 10/27, name = con-11
Checking dimension for connector 11/27, name = con-13
Checking dimension for connector 12/27, name = con-15
Checking dimension for connector 13/27, name = con-16
  Changing dimension for connector 13/27 from 10 to 3
Checking dimension for connector 14/27, name = con-17
  Changing dimension for connector 14/27 from 10 to 3
Checking dimension for connector 15/27, name = con-18
  Changing dimension for connector 15/27 from 10 to 3
Checking dimension for connector 16/27, name = con-19
  Changing dimension for connector 16/27 from 10 to 3
Checking dimension for connector 17/27, name = con-20
  Changing dimension for connector 17/27 from 10 to 3
Checking dimension for connector 18/27, name = con-21
  Changing dimension for connector 18/27 from 10 to 3
Checking dimension for connector 19/27, name = con-22
Checking dimension for connector 20/27, name = con-23
  Changing dimension for connector 20/27 from 10 to 3
Checking dimension for connector 21/27, name = con-24
Checking dimension for connector 22/27, name = con-26
  Changing dimension for connector 22/27 from 10 to 4
Checking dimension for connector 23/27, name = con-27
Checking dimension for connector 24/27, name = con-29
  Changing dimension for connector 24/27 from 10 to 4
Checking dimension for connector 25/27, name = con-31
Checking dimension for connector 26/27, name = con-33
Checking dimension for connector 27/27, name = con-37
Processing spacing values for connector 1/27, name = con-1
Processing spacing values for connector 2/27, name = con-2
Processing spacing values for connector 3/27, name = con-3
Processing spacing values for connector 4/27, name = con-4
Processing spacing values for connector 5/27, name = con-5
Processing spacing values for connector 6/27, name = con-6
Processing spacing values for connector 7/27, name = con-7
Processing spacing values for connector 8/27, name = con-8
Processing spacing values for connector 9/27, name = con-9
Processing spacing values for connector 10/27, name = con-11
Processing spacing values for connector 11/27, name = con-13
Processing spacing values for connector 12/27, name = con-15
Processing spacing values for connector 13/27, name = con-16
Processing spacing values for connector 14/27, name = con-17
Processing spacing values for connector 15/27, name = con-18
Processing spacing values for connector 16/27, name = con-19
Processing spacing values for connector 17/27, name = con-20
Processing spacing values for connector 18/27, name = con-21
Processing spacing values for connector 19/27, name = con-22
Processing spacing values for connector 20/27, name = con-23
Processing spacing values for connector 21/27, name = con-24
Processing spacing values for connector 22/27, name = con-26
Processing spacing values for connector 23/27, name = con-27
Processing spacing values for connector 24/27, name = con-29
Processing spacing values for connector 25/27, name = con-31
Processing spacing values for connector 26/27, name = con-33
Processing spacing values for connector 27/27, name = con-37
Number of unique endpoints = 17
Checking for baffle intersections.
Performing Local Proximity Refinement
Adjusting connector dimensions based on proximity to other connectors.
  Proximity test for connector 1/27, con-1.
    Connector dimension changed from 10 to 12, avg. spacing changed from 8.88889 to 7.27273
  Proximity test for connector 2/27, con-2.
    Connector dimension changed from 10 to 12, avg. spacing changed from 8.88889 to 7.27273
  Proximity test for connector 3/27, con-3.
    Connector dimension changed from 10 to 12, avg. spacing changed from 8.88889 to 7.27273
  Proximity test for connector 4/27, con-4.
    Connector dimension changed from 10 to 12, avg. spacing changed from 8.88889 to 7.27273
  Proximity test for connector 5/27, con-5.
    Connector dimension changed from 10 to 12, avg. spacing changed from 8.88889 to 7.27273
  Proximity test for connector 6/27, con-6.
    Connector dimension changed from 10 to 12, avg. spacing changed from 8.88889 to 7.27273
  Proximity test for connector 7/27, con-7.
    Connector dimension changed from 10 to 12, avg. spacing changed from 8.88889 to 7.27273
  Proximity test for connector 8/27, con-8.
    Connector dimension changed from 10 to 12, avg. spacing changed from 8.88889 to 7.27273
  Proximity test for connector 9/27, con-9.
    Connector dimension changed from 10 to 12, avg. spacing changed from 8.88889 to 7.27273
  Proximity test for connector 10/27, con-11.
    Connector dimension changed from 10 to 12, avg. spacing changed from 8.88889 to 7.27273
  Proximity test for connector 11/27, con-13.
    Connector dimension changed from 10 to 12, avg. spacing changed from 8.88889 to 7.27273
  Proximity test for connector 12/27, con-15.
    Connector dimension changed from 10 to 12, avg. spacing changed from 8.88889 to 7.27273
  Proximity test for connector 13/27, con-16.
    Connector dimension changed from 3 to 12, avg. spacing changed from 0.985232 to 0.179133
  Proximity test for connector 14/27, con-17.
    Connector dimension changed from 3 to 12, avg. spacing changed from 0.985232 to 0.179133
  Proximity test for connector 15/27, con-18.
  Proximity test for connector 16/27, con-19.
    Connector dimension changed from 3 to 12, avg. spacing changed from 0.985232 to 0.179133
  Proximity test for connector 17/27, con-20.
    Connector dimension changed from 3 to 12, avg. spacing changed from 0.985232 to 0.179133
  Proximity test for connector 18/27, con-21.
  Proximity test for connector 19/27, con-22.
    Connector dimension changed from 10 to 12, avg. spacing changed from 0.821631 to 0.672244
  Proximity test for connector 20/27, con-23.
  Proximity test for connector 21/27, con-24.
    Connector dimension changed from 10 to 12, avg. spacing changed from 0.821627 to 0.67224
  Proximity test for connector 22/27, con-26.
    Connector dimension changed from 4 to 12, avg. spacing changed from 1.33869 to 0.365097
  Proximity test for connector 23/27, con-27.
    Connector dimension changed from 10 to 12, avg. spacing changed from 0.907322 to 0.742354
  Proximity test for connector 24/27, con-29.
    Connector dimension changed from 4 to 12, avg. spacing changed from 1.26705 to 0.34556
  Proximity test for connector 25/27, con-31.
    Connector dimension changed from 10 to 12, avg. spacing changed from 0.821631 to 0.672244
  Proximity test for connector 26/27, con-33.
    Connector dimension changed from 10 to 12, avg. spacing changed from 0.821627 to 0.67224
  Proximity test for connector 27/27, con-37.
    Connector dimension changed from 10 to 12, avg. spacing changed from 0.907322 to 0.742354
Adjusting node spacing from geometry
Adjusting connector dimensions based on end spacings.
Connector con-1 current dim = 12
Connector con-2 current dim = 12
Connector con-3 current dim = 12
Connector con-4 current dim = 12
Connector con-5 current dim = 12
Connector con-6 current dim = 12
Connector con-7 current dim = 12
Connector con-8 current dim = 12
Connector con-9 current dim = 12
Connector con-11 current dim = 12
Connector con-13 current dim = 12
Connector con-15 current dim = 12
Connector con-16 current dim = 12
Connector con-17 current dim = 12
Connector con-18 current dim = 3
Connector con-19 current dim = 12
Connector con-20 current dim = 12
Connector con-21 current dim = 3
Connector con-22 current dim = 12
Connector con-23 current dim = 3
Connector con-24 current dim = 12
Connector con-26 current dim = 12
Connector con-27 current dim = 12
Connector con-29 current dim = 12
Connector con-31 current dim = 12
Connector con-33 current dim = 12
Connector con-37 current dim = 12
Domain list has 14 entries.
Looking for periodic domain attributes from geometry.
  Tolerance = 6.19984e-05
Number of periodic target domains = 0
Unstructured domain 1 of 14:
  boundary name = Farfield.
    Creating boundary name Farfield
Unstructured domain 2 of 14:
  boundary name = Farfield.
    Farfield already in boundary name list.
Unstructured domain 3 of 14:
  boundary name = Farfield.
    Farfield already in boundary name list.
Unstructured domain 4 of 14:
  boundary name = Farfield.
    Farfield already in boundary name list.
Unstructured domain 5 of 14:
  boundary name = Farfield.
    Farfield already in boundary name list.
Unstructured domain 6 of 14:
  boundary name = Farfield.
    Farfield already in boundary name list.
Unstructured domain 7 of 14:
  boundary name = Wing1.
    Creating boundary name Wing1
Unstructured domain 8 of 14:
  boundary name = Wing1.
    Wing1 already in boundary name list.
Unstructured domain 9 of 14:
  boundary name = Wing1.
    Wing1 already in boundary name list.
Unstructured domain 10 of 14:
  boundary name = Wing1.
    Wing1 already in boundary name list.
Unstructured domain 11 of 14:
  boundary name = Wing1.
    Wing1 already in boundary name list.
Unstructured domain 12 of 14:
  boundary name = Wing1.
    Wing1 already in boundary name list.
Unstructured domain 13 of 14:
  boundary name = Wing1.
    Wing1 already in boundary name list.
Unstructured domain 14 of 14:
  boundary name = Wing1.
    Wing1 already in boundary name list.
Checking for blunt flag attribute on geometry faces.
Performing initialization pass on all unstructured domains.
Unstructured domain list for assembly has 14 entries.
Structured domain list for assembly has 0 entries.
Periodic target domain list for assembly has 0 entries.
Creating unstructured block from 14 domains.
Block = auto-blk
  Setting up unstructured block.
Retrieving block attributes from geometry.
  Initializing unstructured block.
CAE Solver set to UGRID
GeomToMesh finished!
Sat Oct 08 2022  6:10:10PM EDT
Run Time: 00 Hours 00 Minutes 04 Seconds
Pointwise save filename = caps.GeomToMesh.pw
Sat Oct 08 2022  6:10:10PM EDT
Exporting in UGRID format to file basename = caps.GeomToMesh
Mapped 81 / 81 curves to EGADS originals
GMA contains 27 edge groups
GMA contains 14 face groups
Wrote geometry-mesh associativity to caps.GeomToMesh.gma
GeomToMesh I/O finished!
Sat Oct 08 2022  6:10:12PM EDT
Export Time: 00 Hours 00 Minutes 02 Seconds
Volume mesh:
	Number of nodes          = 9661
	Number of elements       = 54319
	Number of triangles      = 3008
	Number of quadrilatarals = 0
	Number of tetrahedrals   = 54319
	Number of pyramids       = 0
	Number of prisms         = 0
	Number of hexahedrals    = 0
Body = 1
	Number of nodes    = 1508
	Number of elements = 3008
	Number of tris = 3008
	Number of quad = 0
No project name ("Proj_Name") provided - A volume mesh will not be written out
Mapping capsGroup attributes ................
	Number of unique capsGroup attributes = 2
	Name = Farfield, index = 1
	Name = Wing1, index = 2
Mapping capsMesh attributes ................
	Number of unique capsMesh attributes = 2
	Name = Farfield, index = 1
	Name = Wing1, index = 2
Writing global Glyph inputs...
Writing egads file '/Users/jenkins/workspace/ESP_UndefinedCaps/7.4/CAPS/unit/DARWIN64/CAPS/legacy/aim/pyCAPS/workDir_PointwiseTest3/Scratch/workDir_PointwiseTestSingleBody2_pointwiseAIM/caps.egads'....


Running pointwise......
Number of command line arguments = 2
Sat Oct 08 2022  6:10:13PM EDT
Pointwise V18.5
Loading user defaults from capsUserDefaults.glf
GeomToMesh: Defaults
Connector level
    InitDim                  = 6
    MaxDim                   = 8
    MinDim                   = 3
    TurnAngle                = 0.000000
    Deviation                = 0.000000
    SplitAngle               = 0.000000
    JoinCons                 = 0
    ProxGrowthRate           = 1.300000
    SourceSpacing            = 0
    TurnAngleHard            = 70.000000
    EqualSpacing             = 0
Domain level
    Algorithm                = Delaunay
    FullLayers               = 0
    MaxLayers                = 0
    GrowthRate               = 1.300000
    IsoType                  = Triangle
    TRexType                 = Triangle
    TRexARLimit              = 200.000000
    TRexAngleBC              = 0.000000
    Decay                    = 0.500000
    MinEdge                  = 0.000000
    MaxEdge                  = 0.000000
    Adapt                    = 0
    WallSpacing              = 0.000000
    StrDomConvertARTrigger   = 0.000000
Block level
    Algorithm                = Delaunay
    VoxelLayers              = 3
    boundaryDecay            = 0.500000
    collisionBuffer          = 0.500000
    maxSkewAngle             = 180.000000
    TRexSkewDelay            = 0
    edgeMaxGrowthRate        = 1.800000
    fullLayers               = 0
    maxLayers                = 0
    growthRate               = 1.300000
    TRexType                 = TetPyramid
    volInitialize            = 1
General
    SkipMeshing              = 1
    CAESolver                = UGRID
    outerBoxScale            = 0
    sourceBoxLengthScale     = 0.000000
    sourceBoxDirection       =  1.000000 0.000000 0.000000 
    sourceBoxAngle           = 0.000000
    sourceGrowthFactor       = 10.000000
    sourcePCDFile            = 
    ModelSize                = 0
    writeGMA                 = 2.0
    assembleTolMult          = 2.0
    modelOrientIntMeshVolume = 1
Elevate On Export
    degree                   = Q1
    costThreshold            = 0.8
    maxIncAngle              = 175.0
    relax                    = 0.05
    smoothingPasses          = 1000
    WCNWeight                = 0.5
    WCNMode                  = Calculate
    writeVTU                 = false
CADFile = caps.egads
Determining model size from file.
Info: Model Size adjusted to 100
Computing maximum DB edge tolerance.
  Quilt list has 14 entries.
  Quilt quilt-1: edge tolerance = 5e-07
  Quilt quilt-2: edge tolerance = 5e-07
  Quilt quilt-3: edge tolerance = 5e-07
  Quilt quilt-4: edge tolerance = 5e-07
  Quilt quilt-5: edge tolerance = 5e-07
  Quilt quilt-6: edge tolerance = 5e-07
  Quilt quilt-7: edge tolerance = 6.19984e-05
  Quilt quilt-8: edge tolerance = 6.19984e-05
  Quilt quilt-9: edge tolerance = 6.19984e-05
  Quilt quilt-10: edge tolerance = 6.19984e-05
  Quilt quilt-11: edge tolerance = 6.19984e-05
  Quilt quilt-12: edge tolerance = 6.19984e-05
  Quilt quilt-13: edge tolerance = 6.19984e-05
  Quilt quilt-14: edge tolerance = 6.19984e-05
  Maximum DB edge tolerance = 6.19984e-05
Performing model assembly pass on geometry entities.
domParams(MinEdge) defined as 1.239969e-04 due to model assembly tolerance
Looking for quilt names in geometry.
  Quilt list has 14 entries.
Quilt list has 14 entries.
Original connector list has 27 entries.
Minimum connector length = 0.00791958
Tolerance = 6.19984e-05
Performing merge on connectors with equal dimensions and common end points.
After regular merge, connector list has 27 entries.
Updating conData
Min Edge Tol: 5.000e-07 on con-1
Max Edge Tol: 6.200e-05 on con-20
Adjusting connector dimensions based on average spacings.
Checking dimension for connector 1/27, name = con-1
Checking dimension for connector 2/27, name = con-2
Checking dimension for connector 3/27, name = con-3
Checking dimension for connector 4/27, name = con-4
Checking dimension for connector 5/27, name = con-5
Checking dimension for connector 6/27, name = con-6
Checking dimension for connector 7/27, name = con-7
Checking dimension for connector 8/27, name = con-8
Checking dimension for connector 9/27, name = con-9
Checking dimension for connector 10/27, name = con-11
Checking dimension for connector 11/27, name = con-13
Checking dimension for connector 12/27, name = con-15
Checking dimension for connector 13/27, name = con-16
  Changing dimension for connector 13/27 from 6 to 3
Checking dimension for connector 14/27, name = con-17
  Changing dimension for connector 14/27 from 6 to 3
Checking dimension for connector 15/27, name = con-18
  Changing dimension for connector 15/27 from 6 to 3
Checking dimension for connector 16/27, name = con-19
  Changing dimension for connector 16/27 from 6 to 3
Checking dimension for connector 17/27, name = con-20
  Changing dimension for connector 17/27 from 6 to 3
Checking dimension for connector 18/27, name = con-21
  Changing dimension for connector 18/27 from 6 to 3
Checking dimension for connector 19/27, name = con-22
Checking dimension for connector 20/27, name = con-23
  Changing dimension for connector 20/27 from 6 to 3
Checking dimension for connector 21/27, name = con-24
Checking dimension for connector 22/27, name = con-26
  Changing dimension for connector 22/27 from 6 to 3
Checking dimension for connector 23/27, name = con-27
Checking dimension for connector 24/27, name = con-29
  Changing dimension for connector 24/27 from 6 to 3
Checking dimension for connector 25/27, name = con-31
Checking dimension for connector 26/27, name = con-33
Checking dimension for connector 27/27, name = con-37
Processing spacing values for connector 1/27, name = con-1
Processing spacing values for connector 2/27, name = con-2
Processing spacing values for connector 3/27, name = con-3
Processing spacing values for connector 4/27, name = con-4
Processing spacing values for connector 5/27, name = con-5
Processing spacing values for connector 6/27, name = con-6
Processing spacing values for connector 7/27, name = con-7
Processing spacing values for connector 8/27, name = con-8
Processing spacing values for connector 9/27, name = con-9
Processing spacing values for connector 10/27, name = con-11
Processing spacing values for connector 11/27, name = con-13
Processing spacing values for connector 12/27, name = con-15
Processing spacing values for connector 13/27, name = con-16
Processing spacing values for connector 14/27, name = con-17
Processing spacing values for connector 15/27, name = con-18
Processing spacing values for connector 16/27, name = con-19
Processing spacing values for connector 17/27, name = con-20
Processing spacing values for connector 18/27, name = con-21
Processing spacing values for connector 19/27, name = con-22
Processing spacing values for connector 20/27, name = con-23
Processing spacing values for connector 21/27, name = con-24
Processing spacing values for connector 22/27, name = con-26
Processing spacing values for connector 23/27, name = con-27
Processing spacing values for connector 24/27, name = con-29
Processing spacing values for connector 25/27, name = con-31
Processing spacing values for connector 26/27, name = con-33
Processing spacing values for connector 27/27, name = con-37
Number of unique endpoints = 17
Checking for baffle intersections.
Performing Local Proximity Refinement
Adjusting connector dimensions based on proximity to other connectors.
  Proximity test for connector 1/27, con-1.
    Connector dimension changed from 6 to 8, avg. spacing changed from 16 to 11.4286
  Proximity test for connector 2/27, con-2.
    Connector dimension changed from 6 to 8, avg. spacing changed from 16 to 11.4286
  Proximity test for connector 3/27, con-3.
    Connector dimension changed from 6 to 8, avg. spacing changed from 16 to 11.4286
  Proximity test for connector 4/27, con-4.
    Connector dimension changed from 6 to 8, avg. spacing changed from 16 to 11.4286
  Proximity test for connector 5/27, con-5.
    Connector dimension changed from 6 to 8, avg. spacing changed from 16 to 11.4286
  Proximity test for connector 6/27, con-6.
    Connector dimension changed from 6 to 8, avg. spacing changed from 16 to 11.4286
  Proximity test for connector 7/27, con-7.
    Connector dimension changed from 6 to 8, avg. spacing changed from 16 to 11.4286
  Proximity test for connector 8/27, con-8.
    Connector dimension changed from 6 to 8, avg. spacing changed from 16 to 11.4286
  Proximity test for connector 9/27, con-9.
    Connector dimension changed from 6 to 8, avg. spacing changed from 16 to 11.4286
  Proximity test for connector 10/27, con-11.
    Connector dimension changed from 6 to 8, avg. spacing changed from 16 to 11.4286
  Proximity test for connector 11/27, con-13.
    Connector dimension changed from 6 to 8, avg. spacing changed from 16 to 11.4286
  Proximity test for connector 12/27, con-15.
    Connector dimension changed from 6 to 8, avg. spacing changed from 16 to 11.4286
  Proximity test for connector 13/27, con-16.
    Connector dimension changed from 3 to 8, avg. spacing changed from 0.985232 to 0.281495
  Proximity test for connector 14/27, con-17.
    Connector dimension changed from 3 to 8, avg. spacing changed from 0.985232 to 0.281495
  Proximity test for connector 15/27, con-18.
  Proximity test for connector 16/27, con-19.
    Connector dimension changed from 3 to 8, avg. spacing changed from 0.985232 to 0.281495
  Proximity test for connector 17/27, con-20.
    Connector dimension changed from 3 to 8, avg. spacing changed from 0.985232 to 0.281495
  Proximity test for connector 18/27, con-21.
  Proximity test for connector 19/27, con-22.
    Connector dimension changed from 6 to 8, avg. spacing changed from 1.47894 to 1.05638
  Proximity test for connector 20/27, con-23.
  Proximity test for connector 21/27, con-24.
    Connector dimension changed from 6 to 8, avg. spacing changed from 1.47893 to 1.05638
  Proximity test for connector 22/27, con-26.
    Connector dimension changed from 3 to 8, avg. spacing changed from 2.00803 to 0.573724
  Proximity test for connector 23/27, con-27.
    Connector dimension changed from 6 to 8, avg. spacing changed from 1.63318 to 1.16656
  Proximity test for connector 24/27, con-29.
    Connector dimension changed from 3 to 8, avg. spacing changed from 1.90058 to 0.543022
  Proximity test for connector 25/27, con-31.
    Connector dimension changed from 6 to 8, avg. spacing changed from 1.47894 to 1.05638
  Proximity test for connector 26/27, con-33.
    Connector dimension changed from 6 to 8, avg. spacing changed from 1.47893 to 1.05638
  Proximity test for connector 27/27, con-37.
    Connector dimension changed from 6 to 8, avg. spacing changed from 1.63318 to 1.16656
Adjusting node spacing from geometry
Adjusting connector dimensions based on end spacings.
Connector con-1 current dim = 8
Connector con-2 current dim = 8
Connector con-3 current dim = 8
Connector con-4 current dim = 8
Connector con-5 current dim = 8
Connector con-6 current dim = 8
Connector con-7 current dim = 8
Connector con-8 current dim = 8
Connector con-9 current dim = 8
Connector con-11 current dim = 8
Connector con-13 current dim = 8
Connector con-15 current dim = 8
Connector con-16 current dim = 8
Connector con-17 current dim = 8
Connector con-18 current dim = 3
Connector con-19 current dim = 8
Connector con-20 current dim = 8
Connector con-21 current dim = 3
Connector con-22 current dim = 8
Connector con-23 current dim = 3
Connector con-24 current dim = 8
Connector con-26 current dim = 8
Connector con-27 current dim = 8
Connector con-29 current dim = 8
Connector con-31 current dim = 8
Connector con-33 current dim = 8
Connector con-37 current dim = 8
Domain list has 14 entries.
Looking for periodic domain attributes from geometry.
  Tolerance = 6.19984e-05
Number of periodic target domains = 0
Unstructured domain 1 of 14:
  boundary name = Farfield.
    Creating boundary name Farfield
Unstructured domain 2 of 14:
  boundary name = Farfield.
    Farfield already in boundary name list.
Unstructured domain 3 of 14:
  boundary name = Farfield.
    Farfield already in boundary name list.
Unstructured domain 4 of 14:
  boundary name = Farfield.
    Farfield already in boundary name list.
Unstructured domain 5 of 14:
  boundary name = Farfield.
    Farfield already in boundary name list.
Unstructured domain 6 of 14:
  boundary name = Farfield.
    Farfield already in boundary name list.
Unstructured domain 7 of 14:
  boundary name = Wing1.
    Creating boundary name Wing1
Unstructured domain 8 of 14:
  boundary name = Wing1.
    Wing1 already in boundary name list.
Unstructured domain 9 of 14:
  boundary name = Wing1.
    Wing1 already in boundary name list.
Unstructured domain 10 of 14:
  boundary name = Wing1.
    Wing1 already in boundary name list.
Unstructured domain 11 of 14:
  boundary name = Wing1.
    Wing1 already in boundary name list.
Unstructured domain 12 of 14:
  boundary name = Wing1.
    Wing1 already in boundary name list.
Unstructured domain 13 of 14:
  boundary name = Wing1.
    Wing1 already in boundary name list.
Unstructured domain 14 of 14:
  boundary name = Wing1.
    Wing1 already in boundary name list.
Checking for blunt flag attribute on geometry faces.
Performing initialization pass on all unstructured domains.
Unstructured domain list for assembly has 14 entries.
Structured domain list for assembly has 0 entries.
Periodic target domain list for assembly has 0 entries.
Creating unstructured block from 14 domains.
Block = auto-blk
  Setting up unstructured block.
Retrieving block attributes from geometry.
  Initializing unstructured block.
CAE Solver set to UGRID
GeomToMesh finished!
Sat Oct 08 2022  6:10:16PM EDT
Run Time: 00 Hours 00 Minutes 03 Seconds
Pointwise save filename = caps.GeomToMesh.pw
Sat Oct 08 2022  6:10:16PM EDT
Exporting in UGRID format to file basename = caps.GeomToMesh
Mapped 81 / 81 curves to EGADS originals
GMA contains 27 edge groups
GMA contains 14 face groups
Wrote geometry-mesh associativity to caps.GeomToMesh.gma
GeomToMesh I/O finished!
Sat Oct 08 2022  6:10:17PM EDT
Export Time: 00 Hours 00 Minutes 01 Seconds
Volume mesh:
	Number of nodes          = 7024
	Number of elements       = 40782
	Number of triangles      = 1272
	Number of quadrilatarals = 0
	Number of tetrahedrals   = 40782
	Number of pyramids       = 0
	Number of prisms         = 0
	Number of hexahedrals    = 0
Body = 1
	Number of nodes    = 640
	Number of elements = 1272
	Number of tris = 1272
	Number of quad = 0
No project name ("Proj_Name") provided - A volume mesh will not be written out
.
Analysis object with the name, pointwiseAIM, has already been initilized
An altName of pointwiseAIM_6 will be used!
Mapping capsGroup attributes ................
	Number of unique capsGroup attributes = 2
	Name = sphere, index = 1
	Name = farfield, index = 2
Mapping capsMesh attributes ................
	Number of unique capsMesh attributes = 0
Writing global Glyph inputs...
Writing egads file '/Users/jenkins/workspace/ESP_UndefinedCaps/7.4/CAPS/unit/DARWIN64/CAPS/legacy/aim/pyCAPS/__main__/Scratch/workDir_PointwiseTestSphere_pointwiseAIM/caps.egads'....


Running pointwise......
Number of command line arguments = 2
Sat Oct 08 2022  6:10:19PM EDT
Pointwise V18.5
Loading user defaults from capsUserDefaults.glf
GeomToMesh: Defaults
Connector level
    InitDim                  = 6
    MaxDim                   = 8
    MinDim                   = 3
    TurnAngle                = 0.000000
    Deviation                = 0.000000
    SplitAngle               = 0.000000
    JoinCons                 = 0
    ProxGrowthRate           = 1.300000
    SourceSpacing            = 0
    TurnAngleHard            = 70.000000
    EqualSpacing             = 0
Domain level
    Algorithm                = Delaunay
    FullLayers               = 0
    MaxLayers                = 0
    GrowthRate               = 1.300000
    IsoType                  = Triangle
    TRexType                 = Triangle
    TRexARLimit              = 200.000000
    TRexAngleBC              = 0.000000
    Decay                    = 0.500000
    MinEdge                  = 0.000000
    MaxEdge                  = 0.000000
    Adapt                    = 0
    WallSpacing              = 0.000000
    StrDomConvertARTrigger   = 0.000000
Block level
    Algorithm                = Delaunay
    VoxelLayers              = 3
    boundaryDecay            = 0.500000
    collisionBuffer          = 0.500000
    maxSkewAngle             = 180.000000
    TRexSkewDelay            = 0
    edgeMaxGrowthRate        = 1.800000
    fullLayers               = 0
    maxLayers                = 0
    growthRate               = 1.300000
    TRexType                 = TetPyramid
    volInitialize            = 1
General
    SkipMeshing              = 1
    CAESolver                = UGRID
    outerBoxScale            = 0
    sourceBoxLengthScale     = 0.000000
    sourceBoxDirection       =  1.000000 0.000000 0.000000 
    sourceBoxAngle           = 0.000000
    sourceGrowthFactor       = 10.000000
    sourcePCDFile            = 
    ModelSize                = 0
    writeGMA                 = 2.0
    assembleTolMult          = 2.0
    modelOrientIntMeshVolume = 1
Elevate On Export
    degree                   = Q1
    costThreshold            = 0.8
    maxIncAngle              = 175.0
    relax                    = 0.05
    smoothingPasses          = 1000
    WCNWeight                = 0.5
    WCNMode                  = Calculate
    writeVTU                 = false
CADFile = caps.egads
Determining model size from file.
Info: Model Size adjusted to 10
Computing maximum DB edge tolerance.
  Quilt list has 8 entries.
  Quilt quilt-1: edge tolerance = 6.91474e-06
  Quilt quilt-2: edge tolerance = 6.91474e-06
  Quilt quilt-3: edge tolerance = 5e-08
  Quilt quilt-4: edge tolerance = 5e-08
  Quilt quilt-5: edge tolerance = 5e-08
  Quilt quilt-6: edge tolerance = 5e-08
  Quilt quilt-7: edge tolerance = 5e-08
  Quilt quilt-8: edge tolerance = 5e-08
  Maximum DB edge tolerance = 6.91474e-06
Performing model assembly pass on geometry entities.
domParams(MinEdge) defined as 1.382948e-05 due to model assembly tolerance
Looking for quilt names in geometry.
  Quilt list has 8 entries.
Quilt list has 8 entries.
Original connector list has 14 entries.
Minimum connector length = 1.5708
Tolerance = 6.91474e-06
Performing merge on connectors with equal dimensions and common end points.
After regular merge, connector list has 14 entries.
Updating conData
Min Edge Tol: 5.000e-08 on con-3
Max Edge Tol: 6.915e-06 on con-1
Adjusting connector dimensions based on average spacings.
Checking dimension for connector 1/14, name = con-1
Checking dimension for connector 2/14, name = con-2
Checking dimension for connector 3/14, name = con-3
  Changing dimension for connector 3/14 from 6 to 3
Checking dimension for connector 4/14, name = con-4
  Changing dimension for connector 4/14 from 6 to 3
Checking dimension for connector 5/14, name = con-5
  Changing dimension for connector 5/14 from 6 to 3
Checking dimension for connector 6/14, name = con-6
  Changing dimension for connector 6/14 from 6 to 3
Checking dimension for connector 7/14, name = con-7
  Changing dimension for connector 7/14 from 6 to 3
Checking dimension for connector 8/14, name = con-8
  Changing dimension for connector 8/14 from 6 to 3
Checking dimension for connector 9/14, name = con-9
  Changing dimension for connector 9/14 from 6 to 3
Checking dimension for connector 10/14, name = con-10
  Changing dimension for connector 10/14 from 6 to 3
Checking dimension for connector 11/14, name = con-11
Checking dimension for connector 12/14, name = con-13
Checking dimension for connector 13/14, name = con-15
Checking dimension for connector 14/14, name = con-17
Processing spacing values for connector 1/14, name = con-1
Processing spacing values for connector 2/14, name = con-2
Processing spacing values for connector 3/14, name = con-3
Processing spacing values for connector 4/14, name = con-4
Processing spacing values for connector 5/14, name = con-5
Processing spacing values for connector 6/14, name = con-6
Processing spacing values for connector 7/14, name = con-7
Processing spacing values for connector 8/14, name = con-8
Processing spacing values for connector 9/14, name = con-9
Processing spacing values for connector 10/14, name = con-10
Processing spacing values for connector 11/14, name = con-11
Processing spacing values for connector 12/14, name = con-13
Processing spacing values for connector 13/14, name = con-15
Processing spacing values for connector 14/14, name = con-17
Number of unique endpoints = 10
Checking for baffle intersections.
Performing Local Proximity Refinement
Adjusting connector dimensions based on proximity to other connectors.
  Proximity test for connector 1/14, con-1.
  Proximity test for connector 2/14, con-2.
  Proximity test for connector 3/14, con-3.
    Connector dimension changed from 3 to 4, avg. spacing changed from 2 to 1.33333
  Proximity test for connector 4/14, con-4.
    Connector dimension changed from 3 to 4, avg. spacing changed from 2 to 1.33333
  Proximity test for connector 5/14, con-5.
    Connector dimension changed from 3 to 4, avg. spacing changed from 2 to 1.33333
  Proximity test for connector 6/14, con-6.
    Connector dimension changed from 3 to 4, avg. spacing changed from 2 to 1.33333
  Proximity test for connector 7/14, con-7.
    Connector dimension changed from 3 to 6, avg. spacing changed from 2 to 0.8
  Proximity test for connector 8/14, con-8.
    Connector dimension changed from 3 to 6, avg. spacing changed from 2 to 0.8
  Proximity test for connector 9/14, con-9.
    Connector dimension changed from 3 to 6, avg. spacing changed from 2 to 0.8
  Proximity test for connector 10/14, con-10.
    Connector dimension changed from 3 to 6, avg. spacing changed from 2 to 0.8
  Proximity test for connector 11/14, con-11.
    Connector dimension changed from 6 to 8, avg. spacing changed from 3 to 2.14286
  Proximity test for connector 12/14, con-13.
    Connector dimension changed from 6 to 8, avg. spacing changed from 3 to 2.14286
  Proximity test for connector 13/14, con-15.
    Connector dimension changed from 6 to 8, avg. spacing changed from 3 to 2.14286
  Proximity test for connector 14/14, con-17.
    Connector dimension changed from 6 to 8, avg. spacing changed from 3 to 2.14286
Adjusting node spacing from geometry
Adjusting connector dimensions based on end spacings.
Connector con-1 current dim = 6
Connector con-2 current dim = 6
Connector con-3 current dim = 4
Connector con-4 current dim = 4
Connector con-5 current dim = 4
Connector con-6 current dim = 4
Connector con-7 current dim = 6
Connector con-8 current dim = 6
Connector con-9 current dim = 6
Connector con-10 current dim = 6
Connector con-11 current dim = 8
Connector con-13 current dim = 8
Connector con-15 current dim = 8
Connector con-17 current dim = 8
Domain list has 8 entries.
Looking for periodic domain attributes from geometry.
  Tolerance = 6.91474e-06
Number of periodic target domains = 0
Unstructured domain 1 of 8:
  boundary name = sphere.
    Creating boundary name sphere
Unstructured domain 2 of 8:
  boundary name = sphere.
    sphere already in boundary name list.
Unstructured domain 3 of 8:
  boundary name = farfield.
    Creating boundary name farfield
Unstructured domain 4 of 8:
  boundary name = farfield.
    farfield already in boundary name list.
Unstructured domain 5 of 8:
  boundary name = farfield.
    farfield already in boundary name list.
Unstructured domain 6 of 8:
  boundary name = farfield.
    farfield already in boundary name list.
Unstructured domain 7 of 8:
  boundary name = farfield.
    farfield already in boundary name list.
Unstructured domain 8 of 8:
  boundary name = farfield.
    farfield already in boundary name list.
Checking for blunt flag attribute on geometry faces.
Performing initialization pass on all unstructured domains.
Unstructured domain list for assembly has 8 entries.
Structured domain list for assembly has 0 entries.
Periodic target domain list for assembly has 0 entries.
Creating unstructured block from 8 domains.
Block = auto-blk
  Setting up unstructured block.
Retrieving block attributes from geometry.
  Initializing unstructured block.
CAE Solver set to UGRID
GeomToMesh finished!
Sat Oct 08 2022  6:10:20PM EDT
Run Time: 00 Hours 00 Minutes 01 Seconds
Pointwise save filename = caps.GeomToMesh.pw
Sat Oct 08 2022  6:10:20PM EDT
Exporting in UGRID format to file basename = caps.GeomToMesh
Mapped 42 / 42 curves to EGADS originals
GMA contains 14 edge groups
GMA contains 8 face groups
Wrote geometry-mesh associativity to caps.GeomToMesh.gma
GeomToMesh I/O finished!
Sat Oct 08 2022  6:10:21PM EDT
Export Time: 00 Hours 00 Minutes 01 Seconds
Volume mesh:
	Number of nodes          = 635
	Number of elements       = 3089
	Number of triangles      = 414
	Number of quadrilatarals = 0
	Number of tetrahedrals   = 3089
	Number of pyramids       = 0
	Number of prisms         = 0
	Number of hexahedrals    = 0
Body = 1
	Number of nodes    = 49
	Number of elements = 94
	Number of tris = 94
	Number of quad = 0
Body = 2
	Number of nodes    = 162
	Number of elements = 320
	Number of tris = 320
	Number of quad = 0
No project name ("Proj_Name") provided - A volume mesh will not be written out
.Mapping capsGroup attributes ................
	Number of unique capsGroup attributes = 3
	Name = Wing1, index = 1
	Name = Wing2, index = 2
	Name = Farfield, index = 3
Mapping capsMesh attributes ................
	Number of unique capsMesh attributes = 3
	Name = Wing1, index = 1
	Name = Wing2, index = 2
	Name = Farfield, index = 3

Getting mesh sizing parameters
	Mesh sizing name - Farfield
	Done getting mesh sizing parameters
Getting surface mesh for body 1 (of 3)
Getting surface mesh for body 2 (of 3)
Getting surface mesh for body 3 (of 3)
Body 1 (of 3)
Number of nodes    = 7820
Number of elements = 15636
Number of node elements          = 0
Number of line elements          = 0
Number of triangle elements      = 15636
Number of quadrilateral elements = 0
Body 2 (of 3)
Number of nodes    = 5889
Number of elements = 11774
Number of node elements          = 0
Number of line elements          = 0
Number of triangle elements      = 11774
Number of quadrilateral elements = 0
Body 3 (of 3)
Number of nodes    = 524
Number of elements = 1044
Number of node elements          = 0
Number of line elements          = 0
Number of triangle elements      = 1044
Number of quadrilateral elements = 0
----------------------------
Total number of nodes    = 14233
Total number of elements = 28454
Mapping capsGroup attributes ................
	Number of unique capsGroup attributes = 3
	Name = Wing1, index = 1
	Name = Wing2, index = 2
	Name = Farfield, index = 3
Number of surface nodes - 14233
Number of surface elements - 28454
Getting volume mesh

Generating volume mesh using TetGen.....

Tetgen input string = pYq1.500/0.000T1.00e-16
Delaunizing vertices...
Delaunay seconds:  0.522982
Creating surface mesh ...
Surface mesh seconds:  0.092678
Recovering boundaries...
Boundary recovery seconds:  0.215672
Removing exterior tetrahedra ...
Exterior tets removal seconds:  0.077345
Recovering Delaunayness...
Delaunay recovery seconds:  0.132669
Refining mesh...
  18972 insertions, added 13254 points, 701278 tetrahedra in queue.
  6317 insertions, added 2883 points, 614952 tetrahedra in queue.
  8421 insertions, added 2047 points, 103425 tetrahedra in queue.
Refinement seconds:  5.59468
Smoothing vertices...
Mesh smoothing seconds:  5.3933
Improving mesh...
Mesh improvement seconds:  0.272889

Writing nodes.
Writing elements.
Writing faces.
Writing edges.

Output seconds:  0.030176
Total running seconds:  12.3341

Statistics:

  Input points: 14233
  Input facets: 28454
  Input segments: 42681
  Input holes: 2
  Input regions: 0

  Mesh points: 33078
  Mesh tetrahedra: 159812
  Mesh faces: 333851
  Mesh faces on exterior boundary: 28454
  Mesh faces on input facets: 28454
  Mesh edges on input segments: 42681
  Steiner points inside domain: 18845

Done meshing using TetGen!
No project name ("Proj_Name") provided - A volume mesh will not be written out

Analysis object with the name, su2AIM, has already been initilized
An altName of su2AIM_1 will be used!

Writing SU2 file ....
Finished writing SU2 file

Getting CFD boundary conditions
	Boundary condition name - Wing1
.
Analysis object with the name, su2AIM, has already been initilized
An altName of su2AIM_2 will be used!
Getting CFD boundary conditions
	Boundary condition name - Farfield
	Boundary condition name - Wing1
	Boundary condition name - X
.Getting CFD boundary conditions
	Boundary condition name - Farfield
	Boundary condition name - Wing1
	Boundary condition name - Wing2
	Done getting CFD boundary conditions
Warning: The su2 cfg file will be overwritten!
Write SU2 configuration file for version "BlackBird (7.3.1) "
Getting CFD boundary conditions
	Boundary condition name - Farfield
	Boundary condition name - Wing1
	Boundary condition name - Wing2
	Done getting CFD boundary conditions
Warning: The su2 cfg file will be overwritten!
Write SU2 configuration file for version "BlackBird (7.3.1) "
.

Running xFoil......
.

Running xFoil......
.

Running xFoil......
.

Running xFoil......
.

Running xFoil......
.

Running xFoil......
.

Running xFoil......


Running xFoil......
Note: The following floating-point exceptions are signalling: IEEE_DENORMAL
.
----------------------------------------------------------------------
Ran 67 tests in 190.753s

OK
WARNING: 'capsProblem.loadCAPS' is deprecated. Please use 'Problem.__init__'!
WARNING: 'capsGeometry.__init__' is deprecated. Please use 'Problem.__init__'!
WARNING: 'capsProblem.setVerbosity' is deprecated. Please use 'Problem.setOutLevel'!
WARNING: 'capsProblem.loadAIM' is deprecated. Please use 'Problem.analysis.create'!
WARNING: 'capsAnalysis.__init__' is deprecated. Please use 'Problem.analysis.create'!
WARNING: 'capsProblem.__init__' is deprecated. Please use 'Problem.__init__'!
WARNING: 'capsAnalysis.setAnalysisVal' is deprecated. Please use 'Analysis.input["varname"].value'!
WARNING: 'capsAnalysis.getAnalysisOutVal' is deprecated. Please use 'Analysis.output["varname"].value'!
WARNING: 'capsAnalysis.aimName' is deprecated. Please use 'name'!
WARNING: 'capsAnalysis.getAnalysisVal' is deprecated. Please use 'Analysis.input["varname"].value'!
WARNING: 'capsGeometry.getGeometryVal' is deprecated. Please use 'Problem.geometry.despmtr["varname"].value'!
WARNING: 'capsGeometry.setGeometryVal' is deprecated. Please use 'Problem.geometry.despmtr["varname"].value'!
Legacy AIM unit testing done!
(cd test; ./runUnitTest.sh)
 EGADS Info: 0 Objects, 0 Reference in Use (of 84) at Close!
 EGADS Info: 0 Objects, 0 Reference in Use (of 84) at Close!
 EGADS Info: 0 Objects, 0 Reference in Use (of 84) at Close!
 EGADS Info: 0 Objects, 0 Reference in Use (of 84) at Close!
 EGADS Info: 0 Objects, 0 Reference in Use (of 84) at Close!
 EGADS Info: 0 Objects, 0 Reference in Use (of 84) at Close!
 EGADS Info: 0 Objects, 0 Reference in Use (of 84) at Close!
 EGADS Info: 0 Objects, 0 Reference in Use (of 84) at Close!
 EGADS Info: 0 Objects, 0 Reference in Use (of 84) at Close!
 EGADS Info: 0 Objects, 0 Reference in Use (of 84) at Close!
 EGADS Info: 0 Objects, 0 Reference in Use (of 84) at Close!
 EGADS Info: 0 Objects, 0 Reference in Use (of 84) at Close!
 EGADS Info: 0 Objects, 0 Reference in Use (of 84) at Close!
 EGADS Info: 0 Objects, 0 Reference in Use (of 84) at Close!
 EGADS Info: 0 Objects, 0 Reference in Use (of 84) at Close!
 EGADS Info: 0 Objects, 0 Reference in Use (of 84) at Close!
 EGADS Info: 0 Objects, 0 Reference in Use (of 84) at Close!
 EGADS Info: 0 Objects, 0 Reference in Use (of 84) at Close!
aimTransferUtil Tests passed!

real	0m0.594s
user	0m0.395s
sys	0m0.050s

=============================================
CAPS test (using c-executables) case /Users/jenkins/workspace/ESP_UndefinedCaps/7.4/CAPS/unit/DARWIN64/ESP/DARWIN64/test/aimTransferUtilTest passed (as expected)
=============================================

+ expectCSuccess /Users/jenkins/workspace/ESP_UndefinedCaps/7.4/CAPS/unit/DARWIN64/ESP/DARWIN64/test/miscUtilsTest
+ /Users/jenkins/workspace/ESP_UndefinedCaps/7.4/CAPS/unit/DARWIN64/ESP/DARWIN64/test/miscUtilsTest
Error in convert_doubleToString: Input fieldWidth of 1 must be greater than 1 for the input value 0.000000E+00
	Returning a 'NaN' string.
Error in convert_doubleToString: Input fieldWidth of -2 must be greater than 1 for the input value 9.000000E+00
	Returning a 'NaN' string.
Error in convert_doubleToString: Input fieldWidth of 0 must be greater than 1 for the input value 9.000000E+00
	Returning a 'NaN' string.
Error in convert_doubleToString: Cannot write -1.000000E+100 with field with 7!
	Returning a 'NaN' string.
Error in convert_doubleToString: Cannot write -9.900000E+99 with field with 7!
	Returning a 'NaN' string.
Error in convert_doubleToString: Input fieldWidth of 2 must be greater than 2 for the input value -1.000000E+00
	Returning a 'NaN' string.
Error in convert_doubleToString: Input fieldWidth of 1 must be greater than 1 for the input value 1.000000E+00
	Returning a 'NaN' string.
Error in convert_integerToString: Input 9999999 fails with requested fieldWidth of 6
	Returning a 'NaN' string.
Error in convert_integerToString: Input -999999 fails with requested fieldWidth of 6
	Returning a 'NaN' string.
Error in convert_integerToString: fieldWidth > 15 not verified
	Returning a 'NaN' string.
Error in convert_integerToString: fieldWidth <= 0 
	Returning a 'NaN' string.
Error in convert_integerToString: fieldWidth <= 0 
	Returning a 'NaN' string.
miscUtils Tests passed!

real	0m0.488s
user	0m0.357s
sys	0m0.049s
+ set +x

=============================================
CAPS test (using c-executables) case /Users/jenkins/workspace/ESP_UndefinedCaps/7.4/CAPS/unit/DARWIN64/ESP/DARWIN64/test/miscUtilsTest passed (as expected)
=============================================

+ expectCSuccess /Users/jenkins/workspace/ESP_UndefinedCaps/7.4/CAPS/unit/DARWIN64/ESP/DARWIN64/test/vlmUtilsTest
+ /Users/jenkins/workspace/ESP_UndefinedCaps/7.4/CAPS/unit/DARWIN64/ESP/DARWIN64/test/vlmUtilsTest
vlmUtils Tests passed!

real	0m0.489s
user	0m0.357s
sys	0m0.048s
+ set +x

=============================================
CAPS test (using c-executables) case /Users/jenkins/workspace/ESP_UndefinedCaps/7.4/CAPS/unit/DARWIN64/ESP/DARWIN64/test/vlmUtilsTest passed (as expected)
=============================================

+ rm -rf aimTest
+ expectCSuccess '/Users/jenkins/workspace/ESP_UndefinedCaps/7.4/CAPS/unit/DARWIN64/ESP/DARWIN64/test/aim testingAIM.csm'
+ /Users/jenkins/workspace/ESP_UndefinedCaps/7.4/CAPS/unit/DARWIN64/ESP/DARWIN64/test/aim testingAIM.csm

 testingAIM/aimInitialize  instance = -1  unitSys = (null)!
 caps_queryAnalysis = 0  4 3 1
 testingAIM/aimInputs instance = -1  index = 1!
  in  1: testingAIMin   0
 testingAIM/aimInputs instance = -1  index = 2!
  in  2: table   0
 testingAIM/aimInputs instance = -1  index = 3!
  in  3: tessIn   0
 testingAIM/aimInputs instance = -1  index = 4!
  in  4: meshFile   0
 testingAIM/aimOutputs instance = -1  index = 1!
  out 1: testingAIMout   0
 testingAIM/aimOutputs instance = -1  index = 2!
  out 2: tessOut   0
 testingAIM/aimOutputs instance = -1  index = 3!
  out 3: meshFile   0


 testingAIM/aimInitialize  instance = 0  unitSys = m!
 testingAIM/aimInputs instance = 0  index = 1!
 testingAIM/aimInputs instance = 0  index = 2!
 testingAIM/aimInputs instance = 0  index = 3!
 testingAIM/aimInputs instance = 0  index = 4!
 testingAIM/aimOutputs instance = 0  index = 1!
 testingAIM/aimOutputs instance = 0  index = 2!
 testingAIM/aimOutputs instance = 0  index = 3!
 testingAIM/aimBackdoor instance = 0: Input String!
 Backdoor return string = aimBackdoor Output

 testingAIM/aimInitialize  instance = 1  unitSys = (null)!
 testingAIM/aimInputs instance = 1  index = 1!
 testingAIM/aimInputs instance = 1  index = 2!
 testingAIM/aimInputs instance = 1  index = 3!
 testingAIM/aimInputs instance = 1  index = 4!
 testingAIM/aimOutputs instance = 1  index = 1!
 testingAIM/aimOutputs instance = 1  index = 2!
 testingAIM/aimOutputs instance = 1  index = 3!

 Intent  = child
 APath   = /Users/jenkins/workspace/ESP_UndefinedCaps/7.4/CAPS/unit/DARWIN64/CAPS/test/aimTest/Scratch/testingAIM1
 UnitSys = (null)
 Exec    = 1
 Fields  =  scalar (1 1)  vector (3 1)  scalar (1 0)  vector (3 0)
 Dirty   =  3

 Problem: # Dirty Analyses = 2!
 Bound:   # Dirty Analyses = 2!
 Analys0: # Dirty Analyses = 0!
 Analys1: # Dirty Analyses = 1!
 testingAIM/aimUpdateState instance = 0!
   tess is NULL!
 testingAIM/aimPreAnalysis instance = 0!
 testingAIM/aimPreAnalysis aim_getBounds = 0
   Analysis in Bound = Interface
     aim_newGeometry = 0!
   getDiscr = 0
   getDataSet = 0, rank = 1, method = 0
   0 scalars!
   meshRef = NULL
 testingAIM/aimExecute instance = 0!
 testingAIM/aimPostAnalysis instance = 0  restart = 0!
 testingAIM/aimPostAnalysis: 0 -- 1 is Config Parameter
 After Execute on Parent

 Problem: # Dirty Analyses = 1!
 Bound:   # Dirty Analyses = 1!
 Analys0: # Dirty Analyses = 0!
 Analys1: # Dirty Analyses = 0!
 testingAIM/aimCalcOutput instance = 0  index = 2 tessOut 0!
 tessPtr = 0
 testingAIM/aimUpdateState instance = 1!
   tess is NULL!
 testingAIM/aimDiscr: tname = Interface, instance = 1!
 testingAIM/aimDiscr: Tessellation set!
 testingAIM/aimDiscr: Body 1/Face 3 matches Interface!
 testingAIM/aimDiscr: ntris = 1962!
 testingAIM/aimDiscr: npts = 1040!
 testingAIM/aimDiscr: tname = Interface, instance = 0!
 testingAIM/aimDiscr: Tessellation set!
 testingAIM/aimDiscr: Body 1/Face 6 matches Interface!
 testingAIM/aimDiscr: ntris = 790!
 testingAIM/aimDiscr: npts = 442!
 testingAIM/aimTransfer name = scalar  instance = 0  npts = 442/1!
 CAPS Info: Bound 'Interface' Normalized Integrated 'scalar'
            Rank 0: src = 6.547926e+01, tgt = 6.547926e+01, diff = 3.844036e-11
 testingAIM/aimPreAnalysis instance = 1!
 testingAIM/aimPreAnalysis aim_getBounds = 0
   Analysis in Bound = Interface
     aim_newGeometry = 0!
   getDiscr = 0
   getDataSet = -303, rank = 0, method = 0
   vectors not setup yet!
 testingAIM/aimExecute instance = 1!
 testingAIM/aimPostAnalysis instance = 1  restart = 0!

 Dirty    =  0

 Problem: # Dirty Analyses = 0!
 Bound:   # Dirty Analyses = 0!
 Analys0: # Dirty Analyses = 0!
 Analys1: # Dirty Analyses = 0!

 Body 1 has length units = cm
 Body 2 has length units = cm

 aimTest has type PROBLEM, subtype PARAMETRIC with 0 attributes
   last: aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:54  1
   hist: (null) -> Initial Phase
         aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:54  1
   2 Bodies, 2 Parameters, 6 GeomIns, 2 GeomOuts, 2 Analyses, 1 Bounds

   ParamName has type VALUE, subtype PARAMETER with 0 attributes
     last: aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:54  2
     hist: (null) -> Starting
           aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:54  2
     value = 0.000000 (null)
   Param has type VALUE, subtype PARAMETER with 0 attributes
     last: aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:54  3
     hist: (null) -> Starting
           aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:54  3
     value = 99 (null)

   num has type VALUE, subtype GEOMETRYIN with 0 attributes
     last: aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:54  6
     hist: (null) -> Initial Phase
           aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:54  1
     hist: (null) -> Starting
           aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:54  6
     value = 8.000000 (null)
   x has type VALUE, subtype GEOMETRYIN with 0 attributes
     last: aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:54  1
     hist: (null) -> Initial Phase
           aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:54  1
     value (8x1) = 7.300000 8.400000 10.400000 11.300000 12.300000 13.800000 14.400000 17.200000 (null)
   ymin has type VALUE, subtype GEOMETRYIN with 0 attributes
     last: aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:54  1
     hist: (null) -> Initial Phase
           aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:54  1
     value (8x1) = -1.250000 -1.900000 -2.100000 -2.100000 -2.100000 -2.100000 -2.100000 -2.100000 (null)
   zmin has type VALUE, subtype GEOMETRYIN with 0 attributes
     last: aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:54  1
     hist: (null) -> Initial Phase
           aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:54  1
     value (8x1) = -0.825000 -0.812500 -0.800000 -0.775000 -0.750000 -0.700000 -0.690000 -0.100000 (null)
   zmax has type VALUE, subtype GEOMETRYIN with 0 attributes
     last: aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:54  1
     hist: (null) -> Initial Phase
           aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:54  1
     value (8x1) = 0.825000 0.812500 0.800000 0.775000 0.750000 0.700000 0.690000 0.100000 (null)
   unused has type VALUE, subtype GEOMETRYIN with 0 attributes
     last: aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:54  7
     hist: (null) -> Initial Phase
           aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:54  1
     hist: (null) -> Starting
           aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:54  7
     linked to ParamName

   pVol has type VALUE, subtype GEOMETRYOUT with 0 attributes
     last: aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:56  16
     hist: (null) -> Starting
           aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:56  16
     value = 34.641525 (null)
   cVol has type VALUE, subtype GEOMETRYOUT with 0 attributes
     last: aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:56  16
     hist: (null) -> Starting
           aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:56  16
     value = 7.296560 (null)

   testingAIM0 has type ANALYSIS, subtype NONE with 0 attributes
     last: aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:56  18
     hist: (null) -> Starting
           aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:56  18
     4 AnalysisIns, 3 AnalysisOuts, 1 AnalysisDynOs
     1 Bodies, 1 Tessellations

     testingAIMin has type VALUE, subtype ANALYSISIN with 0 attributes
       last: aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:54  8
       hist: (null) -> Starting
             aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:54  8
       value = 5.000000 cm
     table has type VALUE, subtype ANALYSISIN with 0 attributes
       last: aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:54  8
       hist: (null) -> Starting
             aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:54  8
       value (1x3) =
        1: Entry1 -> Value1
        2: Entry2 -> Value2
        3: Entry3 -> Value3
     tessIn has type VALUE, subtype ANALYSISIN with 0 attributes
       last: aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:54  8
       hist: (null) -> Starting
             aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:54  8
       value (0x0) = NULL with len = 0 ego
     meshFile has type VALUE, subtype ANALYSISIN with 0 attributes
       last: aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:54  8
       hist: (null) -> Starting
             aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:54  8
       value (0x0) = NULL with len = 0 writer

     testingAIMout has type VALUE, subtype ANALYSISOUT with 0 attributes
       last: aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:54  9
 testingAIM/aimCalcOutput instance = 0  index = 1 testingAIMout 0!
 aim_getDiscr 0 on Interface = 0
 aim_getDataSet 0 on Interface = -329
       value = 12.340000 cm
       lazy: aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:11:09  18
     tessOut has type VALUE, subtype ANALYSISOUT with 0 attributes
       last: aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:56  18
       hist: (null) -> Child Execute
             aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:56  18
       value (0x0) = NULL with len = 0 ego
     meshFile has type VALUE, subtype ANALYSISOUT with 0 attributes
       last: aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:54  9
 testingAIM/aimCalcOutput instance = 0  index = 3 meshFile 0!
       value (0x0) = NULL with len = 0 writer
       lazy: aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:11:09  18

     Everything has type VALUE, subtype ANALYSISDYNO with 0 attributes
       last: aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:56  18
       hist: (null) -> Starting
             aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:56  18
       value = 42 (null)
   testingAIM1 has type ANALYSIS, subtype NONE with 0 attributes
     last: aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:11:09  28
     hist: (null) -> Starting
           aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:54  0
     hist: (null) -> Child Execute
           aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:11:09  28
     4 AnalysisIns, 3 AnalysisOuts, 1 AnalysisDynOs
     1 Bodies, 1 Tessellations

     testingAIMin has type VALUE, subtype ANALYSISIN with 0 attributes
       last: aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:54  10
       hist: (null) -> Starting
             aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:54  10
       value = 6.000000 cm
     table has type VALUE, subtype ANALYSISIN with 0 attributes
       last: aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:54  12
       hist: (null) -> Starting
             aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:54  12
       value (1x3) =
        1: Entry1 -> newValue1
        2: Entry2 -> newValue2
        3: Entry3 -> newValue3
     tessIn has type VALUE, subtype ANALYSISIN with 0 attributes
       last: aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:56  18
       hist: (null) -> Starting
             aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:54  13
       hist: (null) -> Child Execute
             aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:56  23
       linked to tessOut
     meshFile has type VALUE, subtype ANALYSISIN with 0 attributes
       last: aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:54  10
       hist: (null) -> Starting
             aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:54  10
       value (0x0) = NULL with len = 0 writer

     testingAIMout has type VALUE, subtype ANALYSISOUT with 0 attributes
       last: aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:54  11
 testingAIM/aimCalcOutput instance = 1  index = 1 testingAIMout 0!
 aim_getDiscr 1 on Interface = 0
 aim_getDataSet 1 on Interface = -329
       value = 12.340000 cm
       lazy: aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:11:09  28
     tessOut has type VALUE, subtype ANALYSISOUT with 0 attributes
       last: aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:54  11
 testingAIM/aimCalcOutput instance = 1  index = 2 tessOut 0!
 tessPtr = 6000025f8080
       value = 6000025f8080 ego
       lazy: aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:11:09  28
     meshFile has type VALUE, subtype ANALYSISOUT with 0 attributes
       last: aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:54  11
 testingAIM/aimCalcOutput instance = 1  index = 3 meshFile 0!
       value (0x0) = NULL with len = 0 writer
       lazy: aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:11:09  28

     Everything has type VALUE, subtype ANALYSISDYNO with 0 attributes
       last: aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:11:09  28
       hist: (null) -> Child Execute
             aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:11:09  28
       value = 42 (null)

   Interface has type BOUND, subtype NONE with 0 attributes
     last: aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:56  23
     hist: (null) -> Starting
           aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:54  14
     hist: (null) -> Child Execute
           aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:56  23
     2 Connecteds, 0 UnConnecteds

     testingAIM1 has type VERTEXSET, subtype CONNECTED with 0 attributes
       last: aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:56  23
       hist: (null) -> Starting
             aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:54  0
       hist: (null) -> Child Execute
             aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:56  23
       5 DataSets

       xyz has type DATASET, subtype NONE with 0 attributes
         last: aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:56  23
         hist: (null) -> Starting
               aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:54  0
         hist: (null) -> Child Execute
               aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:56  23
         1040 points, rank=3, units=cm
       xyzd has type DATASET, subtype NONE with 0 attributes
         last: aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:54  0
         hist: (null) -> Starting
               aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:54  0
         0 points, rank=3, units=(null)
       param has type DATASET, subtype NONE with 0 attributes
         last: aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:56  23
         hist: (null) -> Starting
               aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:54  0
         hist: (null) -> Child Execute
               aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:56  23
         1040 points, rank=2, units=(null)
       paramd has type DATASET, subtype NONE with 0 attributes
         last: aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:54  0
         hist: (null) -> Starting
               aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:54  0
         0 points, rank=2, units=(null)
       scalar has type DATASET, subtype NONE with 0 attributes
         last: aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:11:09  26
         hist: (null) -> Starting
               aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:54  15
         hist: (null) -> Child Execute
               aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:11:09  26
         1040 points, rank=1, units=(null)
     testingAIM0 has type VERTEXSET, subtype CONNECTED with 0 attributes
       last: aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:56  23
       hist: (null) -> Starting
             aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:54  0
       hist: (null) -> Child Execute
             aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:56  23
       6 DataSets

       xyz has type DATASET, subtype NONE with 0 attributes
         last: aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:56  23
         hist: (null) -> Starting
               aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:54  0
         hist: (null) -> Child Execute
               aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:56  23
         442 points, rank=3, units=cm
       xyzd has type DATASET, subtype NONE with 0 attributes
         last: aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:54  0
         hist: (null) -> Starting
               aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:54  0
         0 points, rank=3, units=(null)
       param has type DATASET, subtype NONE with 0 attributes
         last: aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:56  23
         hist: (null) -> Starting
               aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:54  0
         hist: (null) -> Child Execute
               aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:56  23
         442 points, rank=2, units=(null)
       paramd has type DATASET, subtype NONE with 0 attributes
         last: aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:54  0
         hist: (null) -> Starting
               aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:54  0
         0 points, rank=2, units=(null)
       scalar has type DATASET, subtype NONE with 0 attributes
         last: aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:56  25
         hist: (null) -> Starting
               aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:54  0
         hist: (null) -> Child Execute
               aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:56  25
         442 points, rank=1, units=(null)
       vector has type DATASET, subtype NONE with 0 attributes
         last: aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:54  0
         hist: (null) -> Starting
               aimTest macys.mit.edu:27746 jenkins  2022/10/08  18:10:54  0
 testingAIM/aimTransfer name = vector  instance = 0  npts = 442/3!
         442 points, rank=3, units=(null)

    1: 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000
    8: 14.400000 14.400000 14.400000 14.400000 14.400000 14.381076 14.400000
   15: 14.400000 14.385654 14.400000 14.386399 14.400000 14.400000 14.400000
   22: 14.400000 14.400000 14.400000 14.383470 14.400000 14.400000 14.400000
   29: 14.400000 14.390663 14.400000 14.400000 14.400000 14.400000 14.400000
   36: 14.400000 14.400000 14.390526 14.400000 14.400000 14.400000 14.400000
   43: 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000
   50: 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000
   57: 14.400000 14.400000 14.400000 14.400000 14.377038 14.400000 14.377947
   64: 14.400000 14.378370 14.400000 14.380439 14.400000 14.400000 14.400000
   71: 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000
   78: 14.390431 14.400000 14.400000 14.400000 14.391064 14.400000 14.384912
   85: 14.400000 14.400000 14.400000 14.400000 14.400000 14.390113 14.400000
   92: 14.400000 14.400000 14.400000 14.400000 14.388870 14.400000 14.400000
   99: 14.400000 14.400000 14.386035 14.400000 14.384898 14.400000 14.400000
  106: 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000
  113: 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000
  120: 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000
  127: 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000
  134: 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000
  141: 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000
  148: 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000
  155: 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000
  162: 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000
  169: 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000
  176: 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000
  183: 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000
  190: 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000
  197: 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000
  204: 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000
  211: 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000
  218: 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000
  225: 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000
  232: 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000
  239: 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000
  246: 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000
  253: 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000
  260: 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000
  267: 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000
  274: 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000
  281: 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000
  288: 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000
  295: 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000
  302: 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000
  309: 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000
  316: 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000
  323: 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000
  330: 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000
  337: 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000
  344: 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000
  351: 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000
  358: 14.382997 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000
  365: 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000
  372: 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000
  379: 14.400000 14.400000 14.400000 14.356448 14.400000 14.400000 14.400000
  386: 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000
  393: 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000
  400: 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000
  407: 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000
  414: 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000
  421: 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000
  428: 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000
  435: 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000
  442: 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000
  449: 14.400000 14.360432 14.400000 14.400000 14.400000 14.400000 14.400000
  456: 14.400000 14.400000 14.363710 14.400000 14.400000 14.400000 14.400000
  463: 14.400000 14.400000 14.364299 14.400000 14.400000 14.400000 14.400000
  470: 14.400000 14.400000 14.400000 14.363289 14.400000 14.400000 14.362208
  477: 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000
  484: 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000
  491: 14.400000 14.400000 14.400000 14.365678 14.400000 14.400000 14.400000
  498: 14.400000 14.400000 14.400000 14.400000 14.400000 14.363289 14.400000
  505: 14.400000 14.400000 14.400000 14.361522 14.400000 14.368098 14.400000
  512: 14.400000 14.363976 14.400000 14.400000 14.370432 14.400000 14.400000
  519: 14.400000 14.400000 14.400000 14.400000 14.400000 14.363968 14.400000
  526: 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000
  533: 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000
  540: 14.400000 14.400000 14.363289 14.400000 14.400000 14.363979 14.366708
  547: 14.368597 14.400000 14.400000 14.400000 14.400000 14.367920 14.400000
  554: 14.372633 14.400000 14.400000 14.400000 14.400000 14.362154 14.400000
  561: 14.400000 14.400000 14.400000 14.400000 14.400000 14.366708 14.400000
  568: 14.369034 14.400000 14.369841 14.371226 14.400000 14.400000 14.400000
  575: 14.400000 14.400000 14.368408 14.367520 14.400000 14.368432 14.400000
  582: 14.400000 14.400000 14.400000 14.366087 14.400000 14.400000 14.369959
  589: 14.367920 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000
  596: 14.369369 14.368144 14.400000 14.400000 14.400000 14.400000 14.400000
  603: 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000
  610: 14.367841 14.372775 14.400000 14.400000 14.400000 14.372125 14.378179
  617: 14.400000 14.400000 14.400000 14.400000 14.369095 14.400000 14.400000
  624: 14.400000 14.400000 14.400000 14.400000 14.400000 14.367920 14.371353
  631: 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000 14.400000
  638: 14.400000 14.400000 14.400000 14.400000 14.377272 14.376093 14.400000
  645: 14.372738 14.400000 14.400000 14.370290 14.400000 14.400000 14.400000
  652: 14.400000 14.365824 14.376750 14.400000 14.371580 14.368734 14.400000
  659: 14.373031 14.400000 14.371453 14.400000 14.376424 14.373411 14.375742
  666: 14.379766 14.400000 14.400000 14.372722 14.400000 14.400000 14.372350
  673: 14.400000 14.369868 14.400000 14.379928 14.400000 14.400000 14.400000
  680: 14.400000 14.400000 14.372894 14.375220 14.400000 14.400000 14.400000
  687: 14.400000 14.400000 14.400000 14.379491 14.373945 14.373477 14.373204
  694: 14.369160 14.400000 14.400000 14.371245 14.400000 14.370144 14.400000
  701: 14.400000 14.367593 14.400000 14.400000 14.400000 14.400000 14.400000
  708: 14.377553 14.400000 14.400000 14.372777 14.400000 14.400000 14.400000
  715: 14.400000 14.374692 14.400000 14.400000 14.400000 14.373031 14.375837
  722: 14.400000 14.400000 14.370074 14.400000 14.380072 14.400000 14.400000
  729: 14.400000 14.400000 14.375022 14.372158 14.400000 14.373856 14.380242
  736: 14.400000 14.377974 14.400000 14.400000 14.380573 14.400000 14.400000
  743: 14.400000 14.400000 14.400000 14.370484 14.372158 14.375910 14.400000
  750: 14.381582 14.375912 14.400000 14.400000 14.379288 14.400000 14.373737
  757: 14.400000 14.400000 14.400000 14.379729 14.382285 14.378584 14.400000
  764: 14.382311 14.400000 14.400000 14.374409 14.371245 14.379232 14.373945
  771: 14.400000 14.376341 14.400000 14.400000 14.377043 14.378486 14.374858
  778: 14.382054 14.400000 14.383869 14.381636 14.377184 14.400000 14.400000
  785: 14.400000 14.372636 14.400000 14.368456 14.383921 14.400000 14.400000
  792: 14.383458 14.400000 14.400000 14.400000 14.400000 14.400000 14.381953
  799: 14.400000 14.374858 14.373072 14.378348 14.379772 14.400000 14.378216
  806: 14.378852 14.400000 14.400000 14.400000 14.380161 14.400000 14.400000
  813: 14.384556 14.381516 14.400000 14.376255 14.400000 14.380120 14.400000
  820: 14.400000 14.380472 14.379996 14.400000 14.373072 14.400000 14.373126
  827: 14.379728 14.388089 14.378410 14.377743 14.383644 14.400000 14.400000
  834: 14.381170 14.377592 14.376925 14.384404 14.383167 14.400000 14.382056
  841: 14.400000 14.383692 14.400000 14.383013 14.384733 14.400000 14.400000
  848: 14.400000 14.380633 14.400000 14.400000 14.400000 14.373808 14.381358
  855: 14.400000 14.400000 14.383124 14.400000 14.400000 14.385360 14.376255
  862: 14.373590 14.400000 14.383049 14.386052 14.382506 14.381131 14.383698
  869: 14.384781 14.379968 14.383657 14.384709 14.377957 14.400000 14.380975
  876: 14.400000 14.375227 14.400000 14.379017 14.378731 14.378357 14.376010
  883: 14.373652 14.383370 14.383357 14.385444 14.385424 14.381819 14.384645
  890: 14.379402 14.389897 14.380433 14.400000 14.383857 14.385410 14.384756
  897: 14.379335 14.385835 14.400000 14.385091 14.374477 14.383079 14.383855
  904: 14.380149 14.374722 14.383296 14.381983 14.376090 14.383810 14.378363
  911: 14.387375 14.383245 14.378412 14.383393 14.382951 14.382465 14.382804
  918: 14.384507 14.385472 14.385336 14.385820 14.384140 14.385028 14.385702
  925: 14.383042 14.388214 14.388256 14.382050 14.381706 14.379795 14.381159
  932: 14.381897 14.378803 14.384372 14.381369 14.386079 14.387357 14.385924
  939: 14.382744 14.381612 14.381032 14.386745 14.385849 14.379042 14.385090
  946: 14.400000 14.381764 14.381240 14.379650 14.385693 14.385693 14.386153
  953: 14.384626 14.387791 14.385449 14.400000 14.385665 14.400000 14.379731
  960: 14.380272 14.385409 14.385781 14.381733 14.382438 14.385533 14.380583
  967: 14.386516 14.384573 14.400000 14.378382 14.384594 14.400000 14.386153
  974: 14.382680 14.389375 14.386802 14.381707 14.379398 14.380377 14.386666
  981: 14.387596 14.388630 14.387987 14.379180 14.386395 14.386595 14.400000
  988: 14.385128 14.382720 14.381637 14.387158 14.381496 14.389287 14.386767
  995: 14.382154 14.388300 14.384113 14.381877 14.390676 14.383198 14.387762
 1002: 14.386642 14.388993 14.383485 14.387635 14.390869 14.381952 14.382376
 1009: 14.381221 14.379752 14.400000 14.382249 14.378060 14.383886 14.382511
 1016: 14.387091 14.386270 14.384482 14.387626 14.381697 14.387252 14.400000
 1023: 14.378331 14.384910 14.381021 14.388566 14.400000 14.388325 14.387032
 1030: 14.378428 14.387252 14.379752 14.400000 14.384558 14.384911 14.381221
 1037: 14.378848 14.384694 14.382523 14.382981
 source getTriangles = 0, nGtris = 1962, nGsegs = 5886, Ds = 0 0
 destin getTriangles = 0, nGtris = 790, nGsegs = 2370, Ds = 0 0
 testingAIM/aimCleanup   instance = 0!
 testingAIM/aimCleanup   instance = 1!

real	0m16.056s
user	0m16.207s
sys	0m0.301s
+ set +x

=============================================
CAPS test (using c-executables) case /Users/jenkins/workspace/ESP_UndefinedCaps/7.4/CAPS/unit/DARWIN64/ESP/DARWIN64/test/aim testingAIM.csm passed (as expected)
=============================================

+ rm -rf source.vs destin.vs
+ expectCSuccess '/Users/jenkins/workspace/ESP_UndefinedCaps/7.4/CAPS/unit/DARWIN64/ESP/DARWIN64/test/autoExec testingAIM.csm'
+ /Users/jenkins/workspace/ESP_UndefinedCaps/7.4/CAPS/unit/DARWIN64/ESP/DARWIN64/test/autoExec testingAIM.csm

 testingAIM/aimInitialize  instance = 0  unitSys = m!
 testingAIM/aimInputs instance = 0  index = 1!
 testingAIM/aimInputs instance = 0  index = 2!
 testingAIM/aimInputs instance = 0  index = 3!
 testingAIM/aimInputs instance = 0  index = 4!
 testingAIM/aimOutputs instance = 0  index = 1!
 testingAIM/aimOutputs instance = 0  index = 2!
 testingAIM/aimOutputs instance = 0  index = 3!

 testingAIM/aimInitialize  instance = 1  unitSys = (null)!
 testingAIM/aimInputs instance = 1  index = 1!
 testingAIM/aimInputs instance = 1  index = 2!
 testingAIM/aimInputs instance = 1  index = 3!
 testingAIM/aimInputs instance = 1  index = 4!
 testingAIM/aimOutputs instance = 1  index = 1!
 testingAIM/aimOutputs instance = 1  index = 2!
 testingAIM/aimOutputs instance = 1  index = 3!

 Intent  = child
 APath   = /Users/jenkins/workspace/ESP_UndefinedCaps/7.4/CAPS/unit/DARWIN64/CAPS/test/autoExecTest/Scratch/testingAIM1
 UnitSys = (null)
 Exec    = 2
 Fields  =  scalar (1 1)  vector (3 1)  scalar (1 0)  vector (3 0)
 Dirty   =  3

 testingAIM/aimUpdateState instance = 0!
   tess is NULL!
 testingAIM/aimPreAnalysis instance = 0!
 testingAIM/aimPreAnalysis aim_getBounds = 0
     aim_newGeometry = 0!
   getDiscr = -303
   meshRef = NULL
 testingAIM/aimExecute instance = 0!
 testingAIM/aimPostAnalysis instance = 0  restart = 0!
 testingAIM/aimPostAnalysis: 0 -- 1 is Config Parameter
 testingAIM/aimCalcOutput instance = 0  index = 1 testingAIMout 0!
 aim_getDiscr 0 on Interface = -303
 testingAIM/aimCalcOutput instance = 0  index = 3 meshFile 0!
 testingAIM/aimUpdateState instance = 1!
   tess is NULL!
 testingAIM/aimPreAnalysis instance = 1!
 testingAIM/aimPreAnalysis aim_getBounds = 0
     aim_newGeometry = 0!
   mesh file = /Users/jenkins/workspace/ESP_UndefinedCaps/7.4/CAPS/unit/DARWIN64/CAPS/test/autoExecTest/Scratch/testingAIM0/meshFile
   symLink  = 0
   getDiscr = -303
 testingAIM/aimExecute instance = 1!
 testingAIM/aimPostAnalysis instance = 1  restart = 0!
 testingAIM/aimCalcOutput instance = 1  index = 1 testingAIMout 0!
 aim_getDiscr 1 on Interface = -303

 *** testingAIMout (child) = 12.340000  1 1 ***

 testingAIM/aimCleanup   instance = 0!
 testingAIM/aimCleanup   instance = 1!

real	0m5.992s
user	0m2.209s
sys	0m0.169s
+ set +x

=============================================
CAPS test (using c-executables) case /Users/jenkins/workspace/ESP_UndefinedCaps/7.4/CAPS/unit/DARWIN64/ESP/DARWIN64/test/autoExec testingAIM.csm passed (as expected)
=============================================

[GNU C Compiler (gcc)] Parsing console log (workspace: '/Users/jenkins/workspace/ESP_UndefinedCaps/7.4/CAPS/unit/DARWIN64')
[GNU C Compiler (gcc)] Successfully parsed console log
[GNU C Compiler (gcc)] -> found 0 issues (skipped 0 duplicates)
[GNU C Compiler (gcc)] Skipping post processing
[GNU C Compiler (gcc)] No filter has been set, publishing all 0 issues
[GNU C Compiler (gcc)] Repository miner is not configured, skipping repository mining
[Clang] Parsing console log (workspace: '/Users/jenkins/workspace/ESP_UndefinedCaps/7.4/CAPS/unit/DARWIN64')
[Clang] -> found 0 issues (skipped 0 duplicates)
[Clang] Parsing console log (workspace: '/Users/jenkins/workspace/ESP_UndefinedCaps/7.4/CAPS/unit/DARWIN64')
[Clang] -> found 0 issues (skipped 0 duplicates)
[Clang] Successfully parsed console log
[Clang] -> found 0 issues (skipped 0 duplicates)
[Clang] Parsing console log (workspace: '/Users/jenkins/workspace/ESP_UndefinedCaps/7.4/CAPS/unit/DARWIN64')
[Clang] Skipping post processing
[Clang] No filter has been set, publishing all 0 issues
[Clang] Repository miner is not configured, skipping repository mining
[Static Analysis] Reference build recorder is not configured
[Static Analysis] Obtaining reference build from same job (7.4,CAPS/unit,DARWIN64,macys)
[Static Analysis] Using reference build 'ESP_UndefinedCaps/CASREV=7.4,ESPTEST=CAPS/unit,ESP_ARCH=DARWIN64,buildnode=macys #166' to compute new, fixed, and outstanding issues
[Static Analysis] Issues delta (vs. reference build): outstanding: 0, new: 0, fixed: 0
[Static Analysis] Evaluating quality gates
[Static Analysis] -> PASSED - Total (any severity): 0 - Quality Gate: 1
[Static Analysis] -> All quality gates have been passed
[Static Analysis] Health report is disabled - skipping
[Static Analysis] Created analysis result for 0 issues (found 0 new issues, fixed 0 issues)
[Static Analysis] Attaching ResultAction with ID 'analysis' to build 'ESP_UndefinedCaps/CASREV=7.4,ESPTEST=CAPS/unit,ESP_ARCH=DARWIN64,buildnode=macys #171'.
[Checks API] No suitable checks publisher found.
[PostBuildScript] - [INFO] Executing post build scripts.
[PostBuildScript] - [INFO] build step #0 should only be executed on MATRIX
[WS-CLEANUP] Deleting project workspace...
[WS-CLEANUP] done
Finished: SUCCESS