fix bug that causes output from pyscript to be lost if the pyscript uses os.chdir; fix bug that can lose attributes when SUBTRACTing two co-planar SheetBodys; add plateHoles* test cases; update _edgeID documentation in OpenCSM.h and ESP-help; change SUBTRACTion of two co-planar SheetBodys so that the tool always pokes a hole in the source (instead of scribing the source as was previously done if the source and tool intersect); update scribe11* and subtract7* test cases; if any boolean fails, leave the stack unchanged; add scribeAll argument to SUBTRACT to scribe Edges even when they are coincident with a Face; add scribe12* test cases — jfdannen / detail
fix bug when selecting with xmin=xmax, ymi=ymax, and zmin=zmax; update bentWaffle test case — jfdannen / detail
pass flags from parent MODL into MODL created by udpCsm — jfdannen / detail
add OCC 7.8.0 verification data — jfdannen / detail
Fix OpenCSM.h dependencies when copying to include — haimes / detail
add blend32* test cases; add more OPAM1* test cases; add _vspID attribute to Faces in udpVsp3; update nuscale* verification data — jfdannen / detail
More Linux RPATH changes — haimes / detail
add checkVtk.c; remove blank lines in .vtk writer; add vtk2stl.c — jfdannen / detail
loosen tolerance in convertToBSplines to overcome sloppy Pcurves on DARWIN_ARM64; improve efficiency of .vtk ASCII file writer — jfdannen / detail
working to debug nuscale8* on ARM — jfdannen / detail
working to debug nuscale8* on ARM — jfdannen / detail
working to debug nuscale8* on ARM — jfdannen / detail
working to debug nuscale8* on ARM — jfdannen / detail
add ability to DUMP .vtk ASCII files; fix memory leak in nuscale8* test cases — jfdannen / detail
modify fatal error messages in include line number — jfdannen / detail
fix bug in udfNuscale that occurs for periodic Faces; add nuscale5-8 test cases; fix stanalizer error in ocsmPrintEgo — jfdannen / detail
improve formatting in ocsmPrinEgo when printing BEZIERs or BSPLINEs; fix memory leak in ocsmClearance; fix sensitivity bug in BLEND when tangency is specified; add blend31* test cases; add winglet* test cases; include notations in ESP-help for the commands that cause finite difference sensitivities (CHAMFER, CONNECT, EVALUATE, FILLET, HOLLOW, IMPORT, LOFT, REVOLVE, SSLOPE, SWEEP, TORUS); fix bug that did not compute mass-properties-dots if a group of Nodes, Edges, or Faces were selected (independent of the Body type) — jfdannen / detail
try again at minor fix to avoid unwarranted stanalizer warnings — jfdannen / detail
minor fix to avoid unwarranted stanalizer warnings — jfdannen / detail
fix propagation of Edge attributes for Edges that are LINEs; add persist3* test cases; improve ocsmClearance — jfdannen / detail
Avoid segfault when IGES file lacks units — galbramc / detail
Fix EG_matchBody functions — galbramc / detail
Upgrade ESP config to Python 3.11.9 — galbramc / detail
Further propagate Name attribute in step files — galbramc / detail
Revert last commit — galbramc / detail
Use face bbx in EG_matchBodyFaces — galbramc / detail
Remove memory leaks from UVMAP when reporting errors — haimes / detail
Protect against segFaults for unusual situations in UVMAP — haimes / detail
Suppress lint — galbramc / detail
Enable FullAttr for EG_imprintBody — galbramc / detail
Consitency between Linux x86_64 and aarch64 — galbramc / detail
Updated ESP config files for OCC 7.8 — galbramc / detail
Fix typo — galbramc / detail
Write Loop Name to underlying curves. Read WireBody from step files. — galbramc / detail
EG_isIsoPCurve only works for OCC 7.6 or above — galbramc / detail
Update egads.def — galbramc / detail
Udpate addKnots test — galbramc / detail
Expose EG_addKnots. Add EG_isIsoPCurve. Ensure convertToBspline for LINE/PLANE is degree 1 — galbramc / detail
More Linux RPATH changes — haimes / detail
Correctly trim a trimmed surface in convertToBspline — galbramc / detail
Fix so blend rounded tip works when the first edge in the section loop is the trailing edge — galbramc / detail
Use consistent CURVE/SURFACE approximation algorithms and preserve periodicity in convertToBspline — galbramc / detail
OpenCASCADE messed up the dependency on their libraries for 7.8 — haimes / detail
Improved error message when PCurves do not form a closed loop — galbramc / detail
Drive the use of RPATH in linux by an environment variable at build — haimes / detail
Write SHELL names to underlying step shells — galbramc / detail
Fix check for copying a PCurve — galbramc / detail
Fix stanalizer warning — galbramc / detail
Restor egads.pdf — galbramc / detail
Allow copyObject on PCurve without transformation. Relax geometric consistency check on dot functions. — galbramc / detail
Update Curve-to-Surface distance calculation to match OCCVER >= 7.6 algorithm — galbramc / detail
Supprees fighter4 with OCC 7.8 — galbramc / detail
Update Win Env for 7.8 — galbramc / detail
prepare for testing with OCC 7.8.0 — jfdannen / detail

#110 (Feb 10, 2024, 1:37:07 AM)

Fix dependency on esp.h copy — haimes / detail
remove velocity cache at beginning of build to avoid possible memory leaks — jfdannen / detail
improve accuracy and robustness in ocsmClearance; modify clearance* test cases to make Bodys transparent; add ocsm.Clearance() to pyOCSM; update WAFFLE documentation in ESP-help; add SPLITTER option to udfGanged to scribe a common Body — jfdannen / detail
increase number of iterations to match point count on opposite Edges in a Face in udfCreateBEM — jfdannen / detail
add metaMaterial test case; allow tilde (~) in strings; in BLEND, allow 3 consecutive C1 xsects if .C1side is specified on the middle one(s); add more blend23* test cases; update udfDroop so that cross-section does not have to be in unit-chord standard position; update udfDroop so that it works with a blunt trailing edge; add droop9* test cases; allow arbitrary paths for UDCs; add udprim4 and udprim5 test cases (udprim1 to udprim3 have jfdannen absolute addresses and are not tested by Jenkins) — jfdannen / detail
allow DisplayFilter to select everything that does not match a pattern; update ESP-help near end of tutorial 1; add displayFilter2 test case — jfdannen / detail
uprev to v1.25 (ESP.html, ESP-localhost.html, ESP-help.html, OpenCSM.h, ocsm.rc, ESP_QuickReference.tex); fix memory leak in RULE and BLEND when reorder=1 or -1 for open xsects; add rule30* and blend30* test cases; fix bug that did not reorder xsects in RULE and BLEND when xsect contains only one Edge — jfdannen / detail
Fix library file names for Windoze at 7.8 — haimes / detail
Allow for the use of RPATH in LINUX builds — haimes / detail
Test blend tangency treatment sensitvities — galbramc / detail
Cleanup dot testing — galbramc / detail
Fix Color attribute for IGES/STEP — galbramc / detail
Also read/write Name attribute to STEP geometry — galbramc / detail
ffp-model does not exist for older clang — galbramc / detail
Fix DARWIN64.gcc — galbramc / detail
Use -ffp-model=strict on macOS x86_64 as well — galbramc / detail
Missed one file — galbramc / detail
Update win README — galbramc / detail
Add OCC 7.8 to build — galbramc / detail
Fix Node return in localToGlobal by not looking at Degenerate Edges — haimes / detail
Uprev DARWIN configs — haimes / detail
Fix warning — galbramc / detail
Fix compile error on Linux — galbramc / detail
Fix typo — galbramc / detail
EGADS redme update for Windoze download — haimes / detail
Missed files — galbramc / detail
Uprev EGADS. Add Face Color attribute for STEP/IGES — galbramc / detail

#109 (Jan 13, 2024, 1:37:09 AM)

add ReleaseNotes.txt; update ESP-help.html and testScript.txt — jfdannen / detail
update watermark on ESP_QuickReference — jfdannen / detail
update ESP-help, testScript, and ESP_QuickGuide — jfdannen / detail
fix ESP bug that did not exit pyscript properly; update version number in some tutorial files; update testScript.txt — jfdannen / detail
modify example files so that they work on Firefox, Chrome, and Safari — jfdannen / detail
add shift-click option in ESP TreeWindow to change Viz, Grd, Trn, or Ori since last change — jfdannen / detail
create test cases for examples; add examples to ESP-help — jfdannen / detail
Update training material comment in README — galbramc / detail
Compile Tutorial.pdf — galbramc / detail
Pointwise leak suppression — galbramc / detail
Upgrade Pointwise for new license — galbramc / detail

#108 (Dec 23, 2023, 5:00:01 PM)

allow assert_failed signal to be caught; check that arguments to COMBINE command are all valid Edge and/or Face numbers; fix bug in serveESP that seg faulted when a DESPMTR exceeded its LBOUND or UBOUND in the .csm file; fix memory leak associated with private data in UDP/UDFs; fix bug in GROUP command when ngroup was positive; update group5 test case and its verification data; start to modify ESP-help to include examples — jfdannen / detail
fix undefined variable associated with degenerate Edges when using udfOffset — jfdannen / detail
add deprecation warnings to all .csm/.udc/.cpc files that use LOFT, MACBEG, MACEND, and RECALL — jfdannen / detail
update sensitivity calculations in udpParsec; add capNacelle*, testAdjoint6, and testAdjoint7 test cases; change copyright dates from 2023 to 2024 — jfdannen / detail
fix bug in ocsmCopy that seg faulted when a Branch name exceeded 11 characters — jfdannen / detail
re-add duplicate libraries for linking tile.so (even though latest linker will issue a warning) — jfdannen / detail
fix udp.def for udpPost — jfdannen / detail
try to eliminate duplicate library warnings when linking tile.so — jfdannen / detail
fix bug in transferring Edge attributes when SUBTRACTing a SheetBody from another SheetBody (due to an OpenCASCADE error); fix bug that (erroneously) evalauted arguments to ELSEIF even when the matching IFTHEN evaluated to true; provide udps.ndotchg to tell it any inputs to sensitivities have changed since previous call for sensitivities; provide COPYUDPDATA to copy private data in UDP/UDFs — jfdannen / detail
attempt to fix stanalizer errors — jfdannen / detail
attempt to fix stanalizer errors — jfdannen / detail
attempt to fix stanalizer errors — jfdannen / detail
update udp.def for Windoze — jfdannen / detail
refactor UDP/UDF global storage — jfdannen / detail
Remove MACOSX from makeEnv — galbramc / detail
Add macOS 14 to makeEnv — galbramc / detail
Add more checks on Julia version and ESP env for jlEGADS — galbramc / detail
Update EGADS copyright — galbramc / detail
Update README release in January 2024 — galbramc / detail
Suppress gfortran link warnings on macOS — galbramc / detail
Remove more undefined error link warnings. Stanalizer fixes — galbramc / detail
More link warning suppression on macOS — galbramc / detail
Remove depricated macOS undefined error link flag — galbramc / detail
EGADS doc fixes — galbramc / detail
Uptrade asan path to 15.0.0 — galbramc / detail
Comment out IRIT — galbramc / detail
Only suppress link warnings on macOS — galbramc / detail
Suppress link warnings with PYTHONLIB — galbramc / detail

#107 (Dec 9, 2023, 1:37:07 AM)

fix the code that finds the (non-manifold) Edge velocities generated by a Boolean operation on SheetBodys as well as SolidBodys; update ESP to account for new arguments to DUMP command; fix bug in copying UDP/UDF data that was identified by memcheck; fix bug with optional last argument to DUMP; fix bug associated with copying bodyList in ocsmCopy; print triangle and quadrilateral count when writing .obj file — jfdannen / detail
fix bug in the pattern counter when executing PATBREAK — jfdannen / detail
make UDP/UDFs thread-safe. THIS REQUIRED A CHANGE IN ALL UDP/UDFs. See OpenCSM/src/udp.help for information — jfdannen / detail
fixed bug when using a UDP/UDF that returns a value and finite difference sensitivities are being computed; fix compiler warning associated with _viz attribute; clean up memory at end of ocsmAdjoint — jfdannen / detail
added _grd, _trn, and _ori attributes to change initial settings for Faces and Edges; fix RALLOC so that it can be thread-safe — jfdannen / detail
add Node tolerance checks when reporting tolerance associated with a Body; adding _viz=off Attribute to a Face, Edge, or Node makes them initially not displayed in serveESP (although they can be toggled via the GUI); fix valgrind error associated with not initializing the output Body to EG_mapBody — jfdannen / detail
remove BWB.vsp3 test case since bug in OpenVSP sometimes causes OpenVSP to fail — jfdannen / detail
remove verification data for 7.3.1 and 7.4.1 — jfdannen / detail
change verification data for testAdjoint4 and testAdjoint5 to account for inconsistencies in number of spurious Nodes and Edges — jfdannen / detail
fix bug that did not restore the stack properly when a command returned multiple Bodys; fix bug that did not clear display when plotter exits; make MessageWindow light green to alert user that they need to exit an overlay; allow TIM to reload (if state is TIM_READY); do not print warning that message is not broadcast because wv was not started (which can happen due to timing in multiple threads); add areaRule* test cases and python script — jfdannen / detail
fix bug in filename compression — jfdannen / detail
temporarily disable filename compression — jfdannen / detail
add grpName=. optional argument to DUMP command for .obj files; fix implicit string defaults in ocsmMakeBrch — jfdannen / detail
add ability to put attrName/attrValue on control surfaces in udc/flapz; prototype WaveFront .obj file writer; fix sensitivity bug that returns zeros when UDPs are used and -loadEgads was enabled; add quad output in .obj file writer — jfdannen / detail
add LRED, LGREEN, and LBLUE to list of possible colors; multi-thread ocsmAdjoint; add testAdjoint4 and testAdjoint5 test cases; dynamically allocate arrays in testOcsmAdjoint; print Edge lengths in ocsmPrintBrep; change signature of ocsmAdjoint to not automatically compute full Jacobian; do not run testOcsmAdjoint if -loadEgads is enabled; fix sensitivities bug if there is a UDP/UDF and the -loadEgads flag is set; remove /../ patterns from .udc filenames; fix bug in capsMode that did not allow .csm files to have .udc files in subdirectories — jfdannen / detail
update udp.def in udpTire folder — jfdannen / detail
update to account for UDP/UDF changes — jfdannen / detail
Update python version in setup scripts — galbramc / detail
Update PreBuilt README and setup scripts — galbramc / detail
Add contextCopy to pyEGADS and jlEGADS — galbramc / detail
Remove incorrect 'wrong OR' check for EG_quadTess — galbramc / detail
Add abaqus to PATH — galbramc / detail
Another Python address suppression — galbramc / detail
Upgrade to Python 3.11.6 — galbramc / detail

#106 (Nov 11, 2023, 1:37:11 AM)

add showsize option in udpNuScale; fix bug in udfOffset for Bodys with degenerate Edges; in udfEditAttr, allow attrValue to be a star in HAS statement, independent of whether the value is a string or a number — jfdannen / detail
remove OPAM1_fillet test case (because FILLET works differently on various platforms) — jfdannen / detail
fix undefined variable warning — jfdannen / detail
fix sanitize error in velocityOfEdge — jfdannen / detail
update method for assigning _edgeIDs associated with degenerate Edges; slight improvement in tessellation sensitivities for some cases — jfdannen / detail
update to use EG_mapBody2 to make sure Edges are mapped properly during sensitivity calculations; update sensitivities (again) to improve Edges generated by boolean operations; update selected sensitivity verification data — jfdannen / detail
Write Name attribute to iges files — galbramc / detail
Add contextCopy to def file — haimes / detail
Add tessellation support in EG_contextCopy — haimes / detail
Add EG_contextCopy — haimes / detail
Fix stanalizer — galbramc / detail
Fix FACE/LOOP for EG_imprintBody — galbramc / detail
Allow EG_imprintBody to accept FACE/LOOP pairs — galbramc / detail
Add more debug info in splitBody — haimes / detail
Do not SameParamter shell — galbramc / detail
Fix stanalizer warning — galbramc / detail
Properly map Degenerate Edges in mapBody2 — galbramc / detail
Skip degenerate Edges in mapBody2 — galbramc / detail

#105 (Oct 14, 2023, 1:37:07 AM)

remove FILLETs from OPAM1.csm; add OPAM1_fillet test case; fix typo in computation of analytic sensitivities for a CONE; fix tessellation sensitivities when Node motion is perpendicular to end of Edge; add designZ* test cases; update all verification data associated with data/basic/design* to account for the new (better) sensitivities — jfdannen / detail
add missing data/vsp3 verification data for 7.6.0 — jfdannen / detail
clean up some debug printing during sensitivity calculations — jfdannen / detail
ensure _faceID and _edgeID sequence numbers are consistent when computing finite difference sensitivities; allow CSYSTEM name to be an expression; fix bug that did not apply csystems to SELECT BODY command; add csystem7* test cases — jfdannen / detail
modify OPAM1.udc to pass Jenkins tests — jfdannen / detail
add simple.py to demonstrate a pyscript that can be run either from python prompt or from serveESP — jfdannen / detail
fix sanitize-address error in udpWaffle when progress=1 — jfdannen / detail
add sleep to udpVsp3 to ensure that .stp file is ready for reading; update waffle documentation to include rebuild input argument; fix bug that caused a seg fault if last Body on stack had a degenerate Edge and the -dxdd option was used in serveESP; add attrSpec test case to show how to apply compound string Attributes via the ATTRIBUTE command, via editAttr, and within the waffle; relax restriction on number of SET statements within a waffle; allow PATBREAK in waffle; add waffleC1 test case — jfdannen / detail
modify ocsmGetUV so that inverse evalaution starts at closest tessellation point if npnt is negative; fix memory leak associated with testAdjoint*; fix bug that allowed _hist and __trace__ to contain duplicate entries, which sometimes resulted in an infinite loop; add uCRM test case to data/gallery; fix bug that made had _edgeID point to scribing Face instead of its _faceID during a scribing operation; Edges from a sketch should have _edgeID that identifies the Body and Edge number; fix scribeWing test case; fix _edgeID for Edges that result from SUBTRACTing a SolidBody or planar SheetBody from a SheetBody. BEWARE: backward incompatability for some _edgeID; add edgeIDtest* test cases — jfdannen / detail
add testAdjoint1 test case — jfdannen / detail
make udpWaffle clean up temporary variables if an error occurs while processing a file; add fitCurve8 test case; return error from vspSetup if .vsp3 file does not exist; add pylon/pod to vsp3/OPAM1* test cases — jfdannen / detail
remove X57_MAXWELL_CRM_v4.4.1 from svn (too big) — jfdannen / detail
fix valgrind error in timVspSetup.c; initialization update required by change in EG_mapBody; add bentWaffle test case; SELECT * xmin xmax ... finds closest entity if xmin=xmax ... — jfdannen / detail
Fix lint — galbramc / detail
Fix EG_mapBody infinite loop — galbramc / detail
Update egads.def with EG_mapBody2 — galbramc / detail
Fix incorrect mapBody tests — galbramc / detail
Fix compile error related to M_PI — galbramc / detail
Fix EG_mapBody when topology is identical but geometry differs. Add EG_mapBody2 as replacement for EG_mapBody that also works on FaceBodys. — galbramc / detail
Add additional Node check in EG_localToGlobal — galbramc / detail
Add backup M_PI when not available for Surreal — galbramc / detail
Fix memory leak when error occurs while reading units from STEP/IGES — galbramc / detail
Rename ref test to avoid conflicting with NASA refine ref — galbramc / detail
Preserve tessellation attributes in mapTessBody — galbramc / detail
Undo looking for verfication data — galbramc / detail
Warn about missing verification files — galbramc / detail
Yet one more python suppression — galbramc / detail
Another python valgrind suppression — galbramc / detail
Upgrade to SU2 8.0.0 — galbramc / detail
Update vsp3 memcheck suppression — galbramc / detail

#104 (Sep 9, 2023, 8:36:35 AM)

fix addressing bug in udpWarp; initial implementation of timVspSetup — jfdannen / detail
convert backslashes to forward slashes in filenames in udpVsp3 because anglescipt expects forward slashes — jfdannen / detail
properly rename vsp3 verification test cases — jfdannen / detail
ATTRRECYCLE forces UDPRIM to not be recycled; fix printing of SELECT with attrValu a number; update udpVsp3 to automatically run vsp; add data/vsp3 test cases; add propInteg*a test cases; use _plugsIgnore on Faces that should be ignored during cloud point reclassifications in Plugs; add udpWarp; add ablate0* test cases — jfdannen / detail
modify ocsmPrintBrep to show list Edges as degenerate rather than skipping them; add SPECIAL printCPs command to print the control points associated with all Nurbs in the Body on the top of the stack; add first version of udpVsp3 — jfdannen / detail
Small fix for IGES Name reads — galbramc / detail
IGES reader now also reads all Name attributes. Fix stanalizer warning. — galbramc / detail
Reduce time extract Name attribute from STEP files. — galbramc / detail
Track STEP/IGES name attributes through all read manipulations — galbramc / detail
Add refine executable PATH — galbramc / detail
Suppress vspscript leaks — galbramc / detail
Add data/vsp3/X57_Maxwell_CRM_v4.4.1.csm to csmIgnore for valgrind. — galbramc / detail
Downgrade to OpenVSP 3.34.0 — galbramc / detail
Add vsp3 jenkins files — galbramc / detail
Add VSP3_ROOT for vsp3 testing — galbramc / detail
Add fighter4 as known error on macys — galbramc / detail
Upgrade to AFLR 11.5.9 — galbramc / detail

#103 (Aug 12, 2023, 1:37:08 AM)

first version of udpVspComp — jfdannen / detail
fix bug that did not retain Edge attributes during an ELEVATE operation — jfdannen / detail
add mincp argument to udpNuscale and convertToBSplines functions; add ablate* test cases, including using Plugs; extend Plugs to be able to use DIMENSIONed DESPMTRs; fix bug in velocityOfEdge for Edges with dots that have changing tranges — jfdannen / detail
Lint fix — galbramc / detail
Use python or python3 executables in makeEnv — galbramc / detail
Fixes for Edge only tessellations — galbramc / detail
Undo Makefile change — galbramc / detail
One more adjustment to EG_mapBody — galbramc / detail
Update to AFLR 11.5.8 — galbramc / detail
Update xfoil executables with up to 2048 panels — galbramc / detail

#102 (Jul 8, 2023, 1:37:11 AM)

temporarily remove vspFuse* test cases — jfdannen / detail
analytic sensitivities for sketches; update .gsen and .tsen files; move sketch13* test cases to designY* — jfdannen / detail
start implementing analytic sensitivities for Sketches; add sketch13* test cases — jfdannen / detail
initial, very early, preliminary version of udpVspFuse and associated test cases — jfdannen / detail
fix error in serveESP.mak in previous commit — jfdannen / detail
fix error in serveESP.mak; fix debug code error for windoze — jfdannen / detail
change the SUBTRACTion of two co-planar SheetBodys such that if the Loop associated with the second Body does not cut a clean hole in the first Body, revert to the (default) scribing behavior for SheetBodys, that is scribe the first Body with the Edges from the second Body; update the documentation for SUBTRACT; add scribe11* test cases; fix occasional bug associated with analytical sensitivities when DUMPing a .sens file from with .csm script — jfdannen / detail
add support for BLENDs with .C1side Attributes; add blend23* test cases; change serveESP.mak so that it does not error if PYTHONINC is not set — jfdannen / detail
Only delete EG_mapBody mapped upen error if copied — galbramc / detail
Python suppressoin — galbramc / detail
Update parser — galbramc / detail

#101 (Jun 10, 2023, 1:37:09 AM)

uprev to v1.24 (ESP.html, ESP-localhost.html, ESP-help.html, OpenCSM.h, ocsm.rc) — jfdannen / detail
Uprev to ESP 1.24. Add .C1side attribute for EG_blend. EG_blend now supports three neighboring C1 sections. — galbramc / detail
makeEnv fixes for -dev — galbramc / detail
makeEnv fix AFLR_ARCH for linux-aarch64. Add -dev option to makeEnv. — galbramc / detail

#100 (May 31, 2023, 1:32:18 PM)

added ability to double-click on python error to open pyscript editor at the correct line — jfdannen / detail
update various testing scripts — jfdannen / detail
add udfLinalg and linalg1 test case; add sketch12* test cases — jfdannen / detail
another update to Makefile.LINUX64 — jfdannen / detail
update Makefile.LINUX64 to execute full test suite — jfdannen / detail
Add note about fighter4 on Intel macOS 13.3 — galbramc / detail
Fix step and iges label read — galbramc / detail
Update concepts and viewer pdf. Fix for makeEnv. — galbramc / detail
Updates for ESP 1.23 release. Add LINUX_AARCH64 and DARWIN_ARM64 ESP_ARCH. — galbramc / detail
Fix bug in setup scripts — galbramc / detail
Fix bug in setup scripts — galbramc / detail
Update README files. Add PreBuilt setup scripts. — galbramc / detail
Fix last commit — galbramc / detail
Lint fixes — galbramc / detail
Fix stanalizer warning — galbramc / detail
Fix warning — galbramc / detail
Fix EG_mapTessBody for DEGENERATE Edges. Update makeEnv to look for python3. Readme updates. — galbramc / detail
Increase thread stack size on macOS — galbramc / detail
Another prebuilt fix — galbramc / detail
Fix PreBuilt script — galbramc / detail
Update PreBuilt testing — galbramc / detail
Update ESPbfr.tgz — galbramc / detail

#98 (May 13, 2023, 1:37:06 AM)

fix warnings in previous commit — jfdannen / detail
add ocsmTraceAttrs, ocsmTraceStors, ocsmGetFiletree, and ocsmShowTblOfContents; add ability to trace Attributes, Storges, the FileTree, and the provided representations in the .csm editor; limit number of files in File menu in ESP so that it does not overflow the display; add SPECIAL provides statement to work with ocsmShowTblOfContents — jfdannen / detail
fix bug that did not properly decrement the pattern counter for ENDIF statements after a PATBREAK was executed; fix bug that returned error after SELECTing a degenerate Edge — jfdannen / detail
take shortcut when creating tessellation sensitivities for Faces that do not have Edges that are the result of Boolean operations; update .tsen files for both 7.6.0 and 7.7.0 — jfdannen / detail
fix typo in text string in serveESP — jfdannen / detail
fix warning in previous commit — jfdannen / detail
fix bug that copied Csystems into a UDPRIM; add udfMechanism and mechanism* test cases — jfdannen / detail
update ToDo.txt — jfdannen / detail
add udfDeform to change BSpline control points associated with Faces (and Edges and Nodes) in a Body; add deform* test cases; modify some verification data to account for differences between 7.6.0 and 7.7.0 on all operating systems — jfdannen / detail
update testScript.txt again — jfdannen / detail
remove more clang warnings — jfdannen / detail
remove clang warnings — jfdannen / detail
remove GLOVES from ESP menu (for now) — jfdannen / detail
update data/capsExamples/verify_7.7.0 files; use EG_copyObject since EGADS now allows the copying of PCurves; fix typos in testScript.txt; updates to avoid warnings in latest version of clang — jfdannen / detail
update ESP-help.html — jfdannen / detail
allow cases with Edge-only tessellations to work; add edgeGrid* test cases; update 7.7.0 verification data for imprint5 (should fail); add PLOT_DISPLACE to plot displaced Edges based upon tessellation sensitivities — jfdannen / detail
fix recently-added bug associated with FD tessellation sensitivities for NodeBodys — jfdannen / detail
create verification data for OCC 7.7.0; make sure EVALUATE returns dot=0 — jfdannen / detail
compute tessellatiopn sensitivities correctly for a NodeBody; set and report sensitivity range properly when looking at only one component of tessellation sensitivities; add -forceFDs command line option to force finite difference sensitivities in serveESP — jfdannen / detail
protect against stanalyzer bug — jfdannen / detail
further improvements to flends; add flend10* test cases; fix memory leak when udfOffset encounters an error — jfdannen / detail
add code to protect for UDFs that have references to its input Model; add (hidden) option to create timingReport.txt file; improve flends; add flend9* test cases — jfdannen / detail
Fix warning — galbramc / detail
Lint fix — galbramc / detail
Fix lite stanalizer warning — galbramc / detail
Fix individual bodies in EG_generalBooelean. Other small cleanup. — galbramc / detail
Fix EG_getTopology instantiation — galbramc / detail
Add Surreal EG_getTopology — galbramc / detail
Fix ShapeFix for generalBoolean — galbramc / detail
Add more documentation on EGADS parent child referencing — galbramc / detail
Export EG_rotate_dot on Windoze — galbramc / detail
Track sensitvities with EG_repalceFaces — galbramc / detail
Add Surreal EG_makeTopology — galbramc / detail
Use ffp-model=strict on M1. Relax some test tolerances for M1. — galbramc / detail
Fix clang 14.0.3 warnings — galbramc / detail
Update EGADS doc for makeTessBody with negative legnth — galbramc / detail
Try fixing bodies in generalBoolean — galbramc / detail
Fix error message. Do not change topObj for bodies. Why does this not work... — galbramc / detail
Correctly set topObj for Geometry in Bodies. Set topObj for bodies in Models. Use EG_removeCntxtRef in makeFace. Check Body references before deleting a Model. More robust cleanup in EG_close. — galbramc / detail
Add OCC7.7 valgrind suppressions — galbramc / detail
Fix for jenkins script — galbramc / detail
Upgrade to SU2 7.5.1 — galbramc / detail
Uprade to AFRL 11.4.5 — galbramc / detail
Update clang sanitizer path — galbramc / detail
update so that more flend8* test cases are expected to pass — jfdannen / detail
update so that more flend8* test cases are expected to pass — jfdannen / detail

#97 (Apr 8, 2023, 1:37:06 AM)

update flend8* test cases and their verification data — jfdannen / detail
fix lint error in udfMatchBodys; re-add 7.4.1 verification data for flend8* test cases — jfdannen / detail
change flend fits to be better in some cases; track down memory leaks — jfdannen / detail
fix problem erroneously flagged by lint in udpOffset; update errors reported by udfFlend; fix bug where wrong UDP storage was used in udfOffset (which caused problems when udpOffset was called more than once); remove SPECIAL test of EG_otherCurve; document .multiNode use in RULE command; fix bug where UDP storage is incorrectly cleared for an embedded UDP (in udpCsm); fix bug in udfFlend that sometimes did not correctly reverse one of the Loops; fix memory leak in EVALUATE EDGEKT, EDGECP, FACEUKT, FACEVKT, and FACECP when a signal is raised — jfdannen / detail
fix compiler warning in latest commit — jfdannen / detail
account for fact that Py_SetPythonHome was deprecated in Python 3.11; update udfOffset so that it can generate offsets on SolidBodys (for FLENDs); add offset(I-R)* test cases; use zebra stripe coloring for maximum curvature in ESP (displayType=4); update convertToBsplines to reuse Pcurves whenever possible; add udpBspline and bspline* test cases — jfdannen / detail
Fix getEdgeUV doc — galbramc / detail
Fix full attirubtion for EG_repalceFaces. Fix error message. — galbramc / detail
Remove depricated x86 -m64 compiler flag. Add compiler flags for OCC 7.7. — galbramc / detail
update expected flend8* failures — jfdannen / detail
Put file names first — galbramc / detail
Add OCC 7.7 Jenkins data — galbramc / detail
add expected errors selected in flend8* test cases — jfdannen / detail
Cart3D env fix — galbramc / detail
Upgrade Cart3D version — galbramc / detail
Update for OCC 7.7.0 — galbramc / detail

#96 (Mar 11, 2023, 1:37:09 AM)

improve printing of Pcurves in ocsmPrintEgo; improve marking of Faces with _body and _brch Attributes when returned from a UDF; add PRINT_MAPPING_INFO define to OpenCSM; fix bug that did not account for Node and Edge sensitivities when report sensitivity range in serveESP; fix bug that occasionally did not properly compute Node tessellation sensitivities — jfdannen / detail
add EVALUATE EDGEKT, EVALUATE EDGECP, EVALUATE FACEUKT, EVALUATE FACEVKT, and EVALUATE FACECP; add evaluate3* test cases; add multiRegions* test cases; add SELECT FLIP to flip the order of rntities in at-sellist — jfdannen / detail
add copyAttr=0 argument to RULE and BLEND to copy Edge Attributes in xsects onto RULE/BLEND Edges; add blend29 and rule29 test cases — jfdannen / detail
update ToDo.txt — jfdannen / detail
improve test for matching Nodes in udfMatchBodys; adjust matchBodys5 test case to check at-at-parameters — jfdannen / detail
add arcLengths to ocsmPrintEgo; fix bug in udfMatchBodys when tol was large — jfdannen / detail
modify udfMatchBodys to transfer an Attribute from one Body to the other when the Nodes, Edges, or Faces match; add matchBody5 test case — jfdannen / detail
fix bug associated with UDP/UDF outputs that change shape — jfdannen / detail
remove stanalyzer false positive by disabling checks for one loop in udfTester1.c — jfdannen / detail
attempt to fix stanalizer error in udfTester1.c — jfdannen / detail
allow at-at-parameters from a UDP/UDF to have velocities; split udpTest into udfTester1 (to demonstrate matrix outputs from a UDP/UDF) and udpTester2 (to demonstrate output velocities from a UDP/UDF); adjust Makefiles and associated test cases — jfdannen / detail
Fix for OCC 7.4 — galbramc / detail
Provide error message instead of segfault in EG_otherCurve — galbramc / detail
Add 1-bias to matchBody documentation — galbramc / detail
Upgrade to AFLR 11.3.17 — galbramc / detail

#95 (Feb 11, 2023, 1:37:07 AM)

add test.so to Makefiles; add diagnostic printouts when a Face does not tessellate; make sure all UDP/UDFs return output values to the numUdp instance — jfdannen / detail
allow number of rows and columns to be accessible in UDPs; allow at-at-parameters from a UDP/UDF to be vectors or matricies; add udp_error1 to udp_error9 as possible argument to CATBEG statement; fix bug that did not restore at-at-parameters when a UDP/UDF was recycled; refactor way UDP/UDF arguments are handled — jfdannen / detail
update header files to allow use of C++ main program; add simpleCSM.cpp and modify Makefile.DARWIN64 for testing — jfdannen / detail
numerous updates to Slugs — jfdannen / detail
change udfSlices to skip a slice if OpenCASCADE fails (rather than return an eror); add SET statement to udpWaffle; add waffleB1 and waffleB2 test cases; fix bug in plotting of normals in serveESP and serveCSM; add PRINT_RULE_KNOTS to print number of knots in BSPLINEs entering a RULE or BLEND; allow -ATTRREALSENS to indicate a UDPRIM parameter that is intended to signal that Parameter is used within an included file; add waffleB3 test case to demonstrate this; add waffleB3.jrnl to demonstrate generation of .sens file for every DESPMTR without rebuilds — jfdannen / detail
update return values from udpTire — jfdannen / detail
Suppport Edge only eto files — galbramc / detail
update DARWIN64.gcc to add comma to RPATH needed by some gcc-10 compilers — jfdannen / detail
Add back ESP_ROOT/lib to rpath on DARWIN — galbramc / detail
Use @loader_path for rpath to ESP_ROOT/lib on DARWIN — galbramc / detail
numpy memory leak suppression — galbramc / detail
Upgrade to AFLR 11.3.15 — galbramc / detail
Add NETCDFINC for DARWIN64.gcc testing. — galbramc / detail
Don't build AFLR with Beta testing — galbramc / detail

#94 (Jan 14, 2023, 1:37:06 AM)

update copyright notices — jfdannen / detail
add transform option to Slugs; in Slugs, the KutTriangles option automatically creates a link; add optional GRAFIC to cutTriangles in Slugs; lots of improvements to Slugs, especially for cases with very noisy .stl file — jfdannen / detail
remove training/data/session10/version99/* — jfdannen / detail
fix bug that did not allow interactive use of Slugs; add Kut triangles option in Slugs; update testScript.txt to include interactive Slugs testing — jfdannen / detail
fix bug so that a SCALE branch can be added via the TreeWindow — jfdannen / detail
uprev to v1.23 (ESP.html, ESP-localhost.html, ESP-help.html, OpenCSM.h, ocsm.rc) — jfdannen / detail
fix problem where ESP sometimes posts pyscript file in MessageWindow instead of in the editor — jfdannen / detail
Update Copyright date — galbramc / detail
Uprev to 1.23 — galbramc / detail

#93 (Dec 10, 2022, 1:37:09 AM)

minor documentation updates — jfdannen / detail
put 1 second delay when opening a pyscript to make sure that the browser is ready to display the pyscript in the editor; do not change status of ESP if an error was found while executing a pyscript; update session10 training files to be consistent with new method for creating a large, multi-component, multi-discipline model; update Makefile.DARWIN64; update ESP_QuickReference; update testScript.txt — jfdannen / detail
write and test viewSimplySupport for transport test case — jfdannen / detail
more updates to training/session10 and CAPS/training/python — jfdannen / detail
more updates to transport training files — jfdannen / detail
update ToDo.txt — jfdannen / detail
update error handling in flapz.udc; first attempt at python files for new transport for CAPS training — jfdannen / detail
README release notes updates — galbramc / detail
Rev updates to 1.22 — galbramc / detail
README updates — galbramc / detail

#92 (Nov 30, 2022, 4:51:39 PM)

account for forward- and backward-slashes when opening a .udc — jfdannen / detail
update ereped6a and project verification data again; fix recently-added bug that causes a memory fault for some non-manifold Edges — jfdannen / detail
add Trace button in .csm editor to trace all top-level Parameters; reorganize session10 files to make it easier to build large, multi-component, multi-view models; update ereped6a, hollowC6, hollowC7, hollowCA, hollowCB, and project 3 verification data on 7.6.0 (because of issues highlighted by Xcode 14 on M1); update ereped6a and project3 verification data on 7.4.1 (because of issues highlighted by Xcode 14 on M1); add description of -dxdd flag to ESP-help — jfdannen / detail
update testScript.txt; fix possible buffer overflow in SPECIAL command — jfdannen / detail
update verification data for clearance1 and clerance4 to allow for slight differenes due to chaotic behavior of the EGADS tessellator — jfdannen / detail
convert all (deprecated) sprintf calls to snprintf — jfdannen / detail
update Verification.sh to use serveESP — jfdannen / detail
fix bug where result of SPECIAL/clearance was not recycled — jfdannen / detail
update .tsen files for designG5 and designG6 — jfdannen / detail
remove suppressions of sensitivity checks on designH2, designJ1c, designJ1d, and designJ5; add suppressions of sensitivity checks to designG5 and designG6 (for rounded tips); fix valgrind error in sensitivities in udpWaffle — jfdannen / detail
fix some compiler warnings in most recent commit — jfdannen / detail
add ocsmClearance; add clearance* test cases — jfdannen / detail
Update makeEnv for macOS 13 — galbramc / detail
Replace DEBUG sprintf with snprintf — galbramc / detail
Try again: reorder includes! — haimes / detail
Try again: MSVC 2022 seems to have snprintf defined! — haimes / detail
sprintf -> snprintf mods — haimes / detail
Replace sprintf with snprintf in egadsTopo — galbramc / detail
Suppress clang deprication warning of sprintf in OCC — galbramc / detail
Another exodus suppression — galbramc / detail
Suppresse NETCDF/HDF5 memory leaks — galbramc / detail
Upgrade to SU2 7.4.0 — galbramc / detail

#91 (Nov 12, 2022, 1:37:08 AM)

fix bug in serveESP that did not properly update the build status message after File->Edit->Save; implement analytic sensitivities in udpWaffle; add designX* test cases; make sure userPointer gets reset after perturbation is removed — jfdannen / detail
update designV1,gsen for 7.4 — jfdannen / detail
add ocsmAdjoint and testOcsmAdjoint (in serveESP); allow timPlotter to have two y-axes; add plotter3.py test case — jfdannen / detail
update adjoint test to remove (incorrect) compiler warning — jfdannen / detail
remove data/ide (because it is redundant with data/tutorial6); eliminate automatic build when entering CAPS mode (depend on the lazy evaluation in CAPS); enable sensitivity calculations for scribes and trims; add designW* test cases; fix bug that put wrong _edgeID on scribed Edges; update attrScribe, scribeWing, and scribedSphere test cases; create splitEdges.udc; add splitEdges* test cases — jfdannen / detail
remember name of Pyscript file for next Tool->Pyscript; clean up ESP messages after builds; remove code in esp.timSetCaps that removed the _finalize method; fix memory problem in timViewer for very long scene-graph meta-data buffers; reset magic number to zero to catch cases when a MODL is tried to be used after ocsmFree; modify IMPORT so that it properly marks NODE_BODYs; force tessellation if needed in timViewer; fix bug in ocsmLoadFromEgads that did not properly initialize the .ileft and .irite Branches; remove underscore attributes in .egads files in ocsmLoadFromEgads; force python garbage collection at end of each pyscript execution; add interactive testScript — jfdannen / detail
add PLOT_TESSSENS and PLOT_TEMPCOMPS flags to help in debugging tessellation sensitivities; remove tessellation velocity calculation shortcut to make Edge and Face tessellation velocities consistent; refactor signalError() and signalError2(); allow plotTypes =7 for x-component, =8 for y-component, =9 for z-component of sensitivity — jfdannen / detail
Add simple figure for tri ordering with mixed quad faces — galbramc / detail
Allow unconverged SmoothUV status to continue during parameterization — haimes / detail
More general ubuntu suppression — galbramc / detail
Ubuntu valgrid supression — galbramc / detail
scipy 1.9.2. and 1.9.3 have valgrind issues — galbramc / detail
Add seacas to macys — galbramc / detail
Add SEACAS environment variable for exodus — galbramc / detail
Upgrade cvxopt build for gcc 12 on viggen — galbramc / detail

#90 (Oct 8, 2022, 1:37:09 AM)

clarify description of SELECT x -1 ibody1 — jfdannen / detail
update to account for latest EGADS fix to EG_generalBoolean — jfdannen / detail
add ocsmRegBcstCB to ocsm.def — jfdannen / detail
update Building button to show progress of build in ESP; fix memory leak when ELEVATE command fails (like it often does in the combine.udc); extend SELECT command to SELECT all Faces/Edges/Nodes in current Body that match a Face in another Body; add SELECT NOT to SELECT the Faces/Edges/Nodes not selected and vice versa; fix bug associated with determining if an Edge is a subset of another; update to account for change in EG_isEquivalent; fix bug that did not copy attributes from an Edge in a WireBody that was INTERSECTed with a SolidBody to the new Edge; add PRINT_LAST_EGO compile-time flag to print the last ego after every step in an ocsmBuild; fix bug in sensCSM when trying to remove .csm or .cpc extension from the casename when it did not exist; extend SELECT command to SELECT all Faces/Edges/Nodes in current Body that are within another Body — jfdannen / detail
fix DUMP x.sens for degenerate Edges; add combine.udc so that old .csm scripts that used the (now deprecated) COMBINE command still work; add combine* test cases; add makeErep journal entry so that ereped can be tested; modify at-itype, at-nface, and at-nedge if there is an erep; add POWLE and POWTE arguments to udfDroop; add new droop* test cases; add udfNaca6mc to warp the input thickness distribution with the sum of multiple NACA 6-series meanlines; add naca6mc* test cases — jfdannen / detail
protect against string overflows in strncpy and strncat; fix mesgCallbackFromOpenCSM so that it does not try to broadcast text when in batch mode; initial version of udpNaca6mc — jfdannen / detail
Remove dependencies from file copies — haimes / detail
clean up usage of include files; update dependencies in Makefile and NMakefile — jfdannen / detail
remove pyscript from lint in serveESP.make — jfdannen / detail
update serveCSM.make to fix stanilizer error for pyscript — jfdannen / detail
another attempt to move building of pyscript from Makefile to serveESP.make — jfdannen / detail
move building of pyscript from Makefile to serveESP.make — jfdannen / detail
fix recently added bug in ereped that only allowed 9 colors; remove timHold from viewBodys.py; add batch flag to ESP structure; add assert command in browserToServer; add method of verifying ereped and plugs if running from journal and in -batch mode; next versions of udfDroop2 and udfDroop3; migrate testing in Makefile.DARWIN64 and Makefile.LINUX64 from serveCSM to serveESP; fix bug in esp.SetCaps() in pyESP — jfdannen / detail
next version of udfDroop2; first version of udfDroop3 — jfdannen / detail
next (still incomplete) version of udfDroop2 — jfdannen / detail
Fix the new isEquivalent for periodic curves split into 2 Edges — haimes / detail
modified Ints to Int32 and added egadslite tests — docampo / detail
recompiled pdf references were with ?? — docampo / detail
removed EL flag from some of the effectiveTopology functions — docampo / detail
fixed typos — docampo / detail
Remove bug that would error out if there were no Faces during generalBoolean operations — haimes / detail
Update isEquivalent to fix previous problem — haimes / detail
Allow for senses to be flipped when applying EG_isEquivalent — haimes / detail
added the ego. wrap to the getfield operation — docampo / detail
update udpTire for new include scheme — jfdannen / detail
Fix Edge mapping problem introduced since Rev 1.21 — haimes / detail
changed .obj -> .ego — docampo / detail
Add TOML to egadslite dep — galbramc / detail
compiling for Julia 1.6 and 1.8. test fails for 1.8 — docampo / detail
Update makeEnv to reflect newer MAC OS revs — haimes / detail
Add the Julia interface to the EGADS API documentation — haimes / detail
Suppress scipy memory leak — galbramc / detail
Another python valgrind suppression — galbramc / detail
Add Ubuntu 22.04 valgrind suppressions — galbramc / detail
Use system valgrind — galbramc / detail
Small cleanup of email template — galbramc / detail
Remove torch for now — galbramc / detail
Log parser fixes — galbramc / detail
Suppress torch memory leaks — galbramc / detail
Upgrade sanitizer path to 14.0.0 — galbramc / detail
Try dissabling CUDA for pytorch — galbramc / detail
Look for fatal msvc errors — galbramc / detail
Look for fatal gnu/clang errors — galbramc / detail
Revert to serveCSM for plugs — galbramc / detail
Update lingering serveCSM to serveESP — galbramc / detail

#89 (Sep 12, 2022, 8:47:43 AM)

initial version of udfDroop2 — jfdannen / detail
fix test_pyOCSM to account for updated MESSAGE statement — jfdannen / detail
extend MESSAGE to optionally write to a file; modify message test case; update ESP-help and ESP_QuickReference — jfdannen / detail
fix memory leak when a UDF returns an error; remove extra prints when udfFlend or udfOffset detect an error; update sanitize targets in Makefile.LINUX — jfdannen / detail
allow OFFSET to function properly when the number of Edges in the offset is fewer than the original Body; fix escape-close-parenthesis in ESP_QuickReference; add ability to create periodic SPLINE in sketcher by using SSLOPE(0); add sslope6* test cases — jfdannen / detail
add assert in udfOffset to eliminate warnings on gcc — jfdannen / detail
fix bug that caused ereped to not work for a named Body; fix bug that added bar at end of file that was being editted in ESP; extend ereped so that it can be applied if there are multiple Bodys on the stack; add ereped8 test case; fix ESP hint associated with ELEVATE command; fix bug when SELECT EGDE with a bounding box was applied to a Body with degenerate Edges; add extractBodys test case; fix array bounds error in udpEqn2body; fix bug in ereped initializations for a single Body — jfdannen / detail
remove use of _scaleuv Attribute — jfdannen / detail
allow very long message to be sent from browser to server; add setCsmFile instead of setScmFileBeg/Mid/End; if error occurs when processing a timMesg, put the tim back into READY mode; post message when erep is successfully generated; implement udpEqn2body for SheetBodys; update frustrum3 test case; use __usedBodys__ attribute when computing velocity of Faces or Edges for RULE and BLEND; fix bug in sensCSM that did not reset maximum errors for Bodys when in -tess mode; fix big that did not copy .hasdots during RESTORE . (dot) — jfdannen / detail
Try to fix stanalyzer errors again — haimes / detail
Fix jlEGADS makefiles — galbramc / detail
Try to fix stanalyzer errors — haimes / detail
Suppress gcc-12 warning — galbramc / detail
Effective Topology: apply last change only for EFaces with more than 1 Face — haimes / detail
Effective Topology: check result of getEdgeUV against invEval and pick the closer — haimes / detail
A different possible fix for the MemcheckOcsm on the rule28 cases — haimes / detail
A different possible fix for the MemcheckOcsm on the rule28 cases — haimes / detail
A possible fix for the MemcheckOcsm on the rule28 cases — haimes / detail
Effective Topology: Mark Planar/Periodic EFaces not to tessellate Edges based on Face Curvature — haimes / detail
Fix scan-build warning from last commit again — haimes / detail
Fix scan-build warning from last commit — haimes / detail
Effective Topology: Fix NM Sheetbody Node removal — haimes / detail
Fix NULL bays at end with multiNode Rule — haimes / detail
Updated ruled sensitvities for multiNode — galbramc / detail
A minor update of the documentation of EG_approximate — haimes / detail
Update the docs to specify the additions to EG_approximate and EG_ruled — haimes / detail
Very strange... — galbramc / detail
Allow multiple csm patterns — galbramc / detail
Only check error handling when running all csm files — galbramc / detail
Support changing outLevel and running select files — galbramc / detail
Don't do jlEGADS testing just yet — galbramc / detail
Revert ESP_venv for ESP_Beta — galbramc / detail
Move virtualenv into ESP directory — galbramc / detail
Only run minimal CAPS examples in beta — galbramc / detail
Install torch for beta — galbramc / detail
pip install torch for corsair — galbramc / detail
Smartsr error log parse — galbramc / detail

#87 (Aug 13, 2022, 1:37:08 AM)

update Makefile.LINUX64 — jfdannen / detail
add udfDumpPmtrs and associated test case; implement RESTORE .. (dot dot) to duplicate all Bodys (and Mark) back to the Mark and RESTORE ... (dot dot dot) to duplicate entire stack; add restore3 test case; allow UDF to not return a Body or Bodys; update udfOffset so that it can handle concave corners (but not case where Edges disappear) — jfdannen / detail
temporarily remove offset9* test cases — jfdannen / detail
update udfOffset for negative distance — jfdannen / detail
fix hint associated with JOIN; change JOIN so that it can make non-manifold WireBodys; modify numWireBody* test cases; create ELEVATE command, which only elevates WireBody to SheetBody and SheetBody to SolidBody; remove COMBINE command and instruct user to use JOIN and ELEVATE instead; update UNION and JOIN such that if toMark is set but the operation fails, the stack is left unaltered; add unionSolids* test cases; fix typos in ESP-help (and OpenCSM.h) — jfdannen / detail
add (unneeded) initializations in udfOffset to resolve incorrect lint complaints — jfdannen / detail
implement udpEqn2body for WireBodys; modify inflatedBody2b to use the replicate.udc; implement udfOffset; create offset* test cases; improve error handling associated with SELECT SORT; modify flend5* test cases to use udfOffset — jfdannen / detail
uprev to v1.22 — jfdannen / detail
fix bug that did not update at-parameters for REORDER command; fix bug that changed the input Body to REORDER; fix sensitivity bug whan a RULE/BLEND xsect is RESTOREd after being used — jfdannen / detail
initialize *info in ocsmBodyDetails; return sensible error message when a SET is applied to a CONPMTR, CFGPMTR, or DESPMTR — jfdannen / detail
Fix _close! function to properly check garbage collection for both egads and egadslite — galbramc / detail
Fix jlEGADS makefiles for zsh — galbramc / detail
jlEGADS makefile adjusments. Other small cleanup. — galbramc / detail
delete manifest from lite — docampo / detail
now ?? — docampo / detail
egads also used from egadscommon.jl dependencies — docampo / detail
remove unnecesary ENVS — docampo / detail
now with actually things inside — docampo / detail
created egads common folders — docampo / detail
Rule with Loops of differing number of Edges passes simple test with null 'bay' — haimes / detail
Can rule with sections of different number of Edges -- still need to check null bays, multiplicity > 1, curved EndCaps & EG_splineGeom_dot — haimes / detail
Close memory leak in EGADSlite associated with full attributes — haimes / detail
Fix scan-build problem — haimes / detail
Fix warning from last commit — haimes / detail
Second (but incomplete) cut at Rule with differring numbers of Edges — haimes / detail
Another minor correction to last commit — haimes / detail
Minor correction to last commit — haimes / detail
First (but incomplete) cut at Rule with differring numbers of Edges — haimes / detail
Don't allow for Figure 8 Nodes in ELoops (for now) — haimes / detail
Another def file fix — haimes / detail
Add setTessParam to lite def file — haimes / detail
Updates to egadslite to support pyEGADS.egadslite — galbramc / detail
First cut at pyEGADS.egadslite — galbramc / detail
Remove manifest files for jlEGADS. Check array size for makeGeometry. Fix makeGeometry tests. Some references fixes. — galbramc / detail
Fix some pyEGADS refrencing. Check data length for pyEGADS makeGeometry. — galbramc / detail
Fix topObj during EGADSlite import — haimes / detail
Add U periodic options to EG_approximate for surfaces — haimes / detail
try — docampo / detail
Allow for full attribution in EGADSlite — haimes / detail
Add reference counting for jlEGADS finalizers. Lots of other jlEGADS cleanup. — galbramc / detail
Fix for last commit — galbramc / detail
Various Julia cleanup and fixes — galbramc / detail
Update julia Makefile — galbramc / detail
Remove jlEGADS environment variable — galbramc / detail
added package install — docampo / detail
added Makefile — docampo / detail
first jlEGADS — docampo / detail
First cut at fitting periodic curves — haimes / detail
Fix a number of bugs in the Effective Topology — haimes / detail
Uprev EGADS — haimes / detail
Forgot DARWIN64.clang and DARWIN64.gcc — galbramc / detail
Move DARWIN64 ifort link flag to support EGADS test builds — galbramc / detail
Fix for ifort on newer versions of macOS — galbramc / detail
numpy suppression — galbramc / detail
Always build egadslite — galbramc / detail
Update julia path on linux — galbramc / detail
Remove jlEGADS from Sanitizer and Valgrind — galbramc / detail
mark helix3 and frustrum3 as expected successes — jfdannen / detail
Add jlEGADS test to Sanitizer and valgrind — galbramc / detail
Correct path — galbramc / detail
Add julia testing — galbramc / detail
Small fix in xfoil executables — galbramc / detail
Higher output precision xfoil executables — galbramc / detail
Upgrade to AFLR 10.22.23 — galbramc / detail
Another regsx fix — galbramc / detail
Fix email template — galbramc / detail
Ignore ifort warnings — galbramc / detail

#86 (Jul 13, 2022, 8:00:02 PM)

update duct7.vfy files — jfdannen / detail
return stub.py to expected state at beginning of tutorial6 — jfdannen / detail
add wingBEM2 test case; add duct7 test case; add replicate.udc and ereped6* and ereped7 test cases; add sharpFin test case; typo fix in documentation — jfdannen / detail
Use updated wget for ESP_PreBuilt.bat — galbramc / detail
Beta script updates — galbramc / detail