Warning: No capsGroup/capsIgnore attribute found on edge 4 of face 1, unable to assign a boundary index value
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsReference attributes ................
Number of unique capsReference attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Warning: No capsGroup/capsIgnore attribute found on edge 1 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 2 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 3 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 4 of face 1, unable to assign a boundary index value
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsReference attributes ................
Number of unique capsReference attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Warning: No capsGroup/capsIgnore attribute found on edge 1 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 2 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 3 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 4 of face 1, unable to assign a boundary index value
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsReference attributes ................
Number of unique capsReference attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Warning: No capsGroup/capsIgnore attribute found on edge 1 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 2 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 3 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 4 of face 1, unable to assign a boundary index value
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsReference attributes ................
Number of unique capsReference attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Warning: No capsGroup/capsIgnore attribute found on edge 1 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 2 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 3 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 4 of face 1, unable to assign a boundary index value
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsReference attributes ................
Number of unique capsReference attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Warning: No capsGroup/capsIgnore attribute found on edge 1 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 2 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 3 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 4 of face 1, unable to assign a boundary index value
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsReference attributes ................
Number of unique capsReference attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Warning: No capsGroup/capsIgnore attribute found on edge 1 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 2 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 3 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 4 of face 1, unable to assign a boundary index value
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsReference attributes ................
Number of unique capsReference attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Warning: No capsGroup/capsIgnore attribute found on edge 1 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 2 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 3 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 4 of face 1, unable to assign a boundary index value
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
ok
test_Multiple_Mesh (test_tetgen.TestTETGEN.test_Multiple_Mesh) ... ERROR:: BAD STATUS = -276 from matsol (called from solveSketchOrig:62940)
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 7
Name = box, index = 1
Name = cylinder, index = 2
Name = cone, index = 3
Name = torus, index = 4
Name = sphere, index = 5
Name = boxhole, index = 6
Name = bullet, index = 7
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 1
Name = box, index = 1
Getting surface mesh for body 1 (of 7)
Getting surface mesh for body 2 (of 7)
Getting surface mesh for body 3 (of 7)
Getting surface mesh for body 4 (of 7)
Getting surface mesh for body 5 (of 7)
Getting surface mesh for body 6 (of 7)
7FF8487D9780 EGADS Info: Face #3 -> Edge #9 (9) Internally in Loop 4 7, sen = -1!
70000D457000 EGADS Info: Face #5 -> Edge #17 (9) Internally in Loop 7 4, sen = -1!
7FF8487D9780 EGADS Info: Face #3 -> Edge #9 (9) Internally in Loop 7 4, sen = 1!
70000D457000 EGADS Info: Face #5 -> Edge #17 (9) Internally in Loop 4 7, sen = 1!
Getting surface mesh for body 7 (of 7)
Body 1 (of 7)
Number of nodes = 98
Number of elements = 192
Number of triangle elements = 192
Number of quadrilateral elements = 0
Body 2 (of 7)
Number of nodes = 297
Number of elements = 590
Number of triangle elements = 590
Number of quadrilateral elements = 0
Body 3 (of 7)
Number of nodes = 487
Number of elements = 970
Number of triangle elements = 970
Number of quadrilateral elements = 0
Body 4 (of 7)
Number of nodes = 2048
Number of elements = 4096
Number of triangle elements = 4096
Number of quadrilateral elements = 0
Body 5 (of 7)
Number of nodes = 152
Number of elements = 300
Number of triangle elements = 300
Number of quadrilateral elements = 0
Body 6 (of 7)
Number of nodes = 624
Number of elements = 1248
Number of triangle elements = 1248
Number of quadrilateral elements = 0
Body 7 (of 7)
Number of nodes = 488
Number of elements = 972
Number of triangle elements = 972
Number of quadrilateral elements = 0
----------------------------
Total number of nodes = 4194
Total number of elements = 8368
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 7
Name = box, index = 1
Name = cylinder, index = 2
Name = cone, index = 3
Name = torus, index = 4
Name = sphere, index = 5
Name = boxhole, index = 6
Name = bullet, index = 7
Warning: No capsGroup/capsIgnore attribute found on edge 1 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 2 of face 1, unable to assign a boundary index value
Body 1 number of surface: nodes - 98, elements - 192
Body 2 number of surface: nodes - 297, elements - 590
Body 3 number of surface: nodes - 487, elements - 970
Body 4 number of surface: nodes - 2048, elements - 4096
Body 5 number of surface: nodes - 152, elements - 300
Body 6 number of surface: nodes - 624, elements - 1248
Body 7 number of surface: nodes - 488, elements - 972
Getting volume mesh for body 1 (of 7)
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = box, index = 1
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Done meshing using TetGen!
Getting volume mesh for body 2 (of 7)
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = cylinder, index = 1
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Done meshing using TetGen!
Getting volume mesh for body 3 (of 7)
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = cone, index = 1
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Done meshing using TetGen!
Getting volume mesh for body 4 (of 7)
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = torus, index = 1
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Done meshing using TetGen!
Getting volume mesh for body 5 (of 7)
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = sphere, index = 1
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Done meshing using TetGen!
Getting volume mesh for body 6 (of 7)
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = boxhole, index = 1
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Done meshing using TetGen!
Getting volume mesh for body 7 (of 7)
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = bullet, index = 1
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Done meshing using TetGen!
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 7
Name = box, index = 1
Name = cylinder, index = 2
Name = cone, index = 3
Name = torus, index = 4
Name = sphere, index = 5
Name = boxhole, index = 6
Name = bullet, index = 7
Warning: No capsGroup/capsIgnore attribute found on edge 1 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 2 of face 1, unable to assign a boundary index value
Body 1 number of surface: nodes - 98, elements - 192
Body 2 number of surface: nodes - 297, elements - 590
Body 3 number of surface: nodes - 487, elements - 970
Body 4 number of surface: nodes - 2048, elements - 4096
Body 5 number of surface: nodes - 152, elements - 300
Body 6 number of surface: nodes - 624, elements - 1248
Body 7 number of surface: nodes - 488, elements - 972
Getting volume mesh
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Done meshing using TetGen!
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 7
Name = box, index = 1
Name = cylinder, index = 2
Name = cone, index = 3
Name = torus, index = 4
Name = sphere, index = 5
Name = boxhole, index = 6
Name = bullet, index = 7
Warning: No capsGroup/capsIgnore attribute found on edge 1 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 2 of face 1, unable to assign a boundary index value
Number of surface: nodes - 4194, elements - 8368
Getting volume mesh
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Done meshing using TetGen!
ok
test_faceMatch_MultiDomain (test_tetgen.TestTETGEN.test_faceMatch_MultiDomain) ... ../csmData/MultiDomain/example1.csm
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = dummy_att, index = 1
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 0
Getting surface mesh for body 1 (of 2)
Getting surface mesh for body 2 (of 2)
Body 1 (of 2)
Number of nodes = 374
Number of elements = 744
Number of triangle elements = 744
Number of quadrilateral elements = 0
Body 2 (of 2)
Number of nodes = 98
Number of elements = 192
Number of triangle elements = 192
Number of quadrilateral elements = 0
----------------------------
Total number of nodes = 472
Total number of elements = 936
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = dummy_att, index = 1
Body 1 number of surface: nodes - 374, elements - 744
Body 2 number of surface: nodes - 98, elements - 192
Getting volume mesh
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Done meshing using TetGen!
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = dummy_att, index = 1
Body 1 number of surface: nodes - 374, elements - 744
Body 2 number of surface: nodes - 98, elements - 192
Getting volume mesh for body 1 (of 2)
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = dummy_att, index = 1
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Done meshing using TetGen!
Getting volume mesh for body 2 (of 2)
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = dummy_att, index = 1
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Done meshing using TetGen!
../csmData/MultiDomain/example2.csm
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = dummy_att, index = 1
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 0
Getting surface mesh for body 1 (of 3)
Getting surface mesh for body 2 (of 3)
Getting surface mesh for body 3 (of 3)
Body 1 (of 3)
Number of nodes = 386
Number of elements = 768
Number of triangle elements = 768
Number of quadrilateral elements = 0
Body 2 (of 3)
Number of nodes = 98
Number of elements = 192
Number of triangle elements = 192
Number of quadrilateral elements = 0
Body 3 (of 3)
Number of nodes = 98
Number of elements = 192
Number of triangle elements = 192
Number of quadrilateral elements = 0
----------------------------
Total number of nodes = 582
Total number of elements = 1152
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = dummy_att, index = 1
Body 1 number of surface: nodes - 386, elements - 768
Body 2 number of surface: nodes - 98, elements - 192
Body 3 number of surface: nodes - 98, elements - 192
Getting volume mesh
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Done meshing using TetGen!
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = dummy_att, index = 1
Body 1 number of surface: nodes - 386, elements - 768
Body 2 number of surface: nodes - 98, elements - 192
Body 3 number of surface: nodes - 98, elements - 192
Getting volume mesh for body 1 (of 3)
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = dummy_att, index = 1
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Done meshing using TetGen!
Getting volume mesh for body 2 (of 3)
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = dummy_att, index = 1
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Done meshing using TetGen!
Getting volume mesh for body 3 (of 3)
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = dummy_att, index = 1
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Done meshing using TetGen!
../csmData/MultiDomain/example3.csm
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = dummy_att, index = 1
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 0
Getting surface mesh for body 1 (of 3)
Getting surface mesh for body 2 (of 3)
Getting surface mesh for body 3 (of 3)
Body 1 (of 3)
Number of nodes = 351
Number of elements = 698
Number of triangle elements = 698
Number of quadrilateral elements = 0
Body 2 (of 3)
Number of nodes = 98
Number of elements = 192
Number of triangle elements = 192
Number of quadrilateral elements = 0
Body 3 (of 3)
Number of nodes = 42
Number of elements = 80
Number of triangle elements = 80
Number of quadrilateral elements = 0
----------------------------
Total number of nodes = 491
Total number of elements = 970
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = dummy_att, index = 1
Body 1 number of surface: nodes - 351, elements - 698
Body 2 number of surface: nodes - 98, elements - 192
Body 3 number of surface: nodes - 42, elements - 80
Getting volume mesh
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Done meshing using TetGen!
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = dummy_att, index = 1
Body 1 number of surface: nodes - 351, elements - 698
Body 2 number of surface: nodes - 98, elements - 192
Body 3 number of surface: nodes - 42, elements - 80
Getting volume mesh for body 1 (of 3)
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = dummy_att, index = 1
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Done meshing using TetGen!
Getting volume mesh for body 2 (of 3)
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = dummy_att, index = 1
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Done meshing using TetGen!
Getting volume mesh for body 3 (of 3)
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = dummy_att, index = 1
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Done meshing using TetGen!
../csmData/MultiDomain/example4.csm
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = dummy_att, index = 1
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 0
Getting surface mesh for body 1 (of 3)
Getting surface mesh for body 2 (of 3)
Getting surface mesh for body 3 (of 3)
Body 1 (of 3)
Number of nodes = 376
Number of elements = 748
Number of triangle elements = 748
Number of quadrilateral elements = 0
Body 2 (of 3)
Number of nodes = 98
Number of elements = 192
Number of triangle elements = 192
Number of quadrilateral elements = 0
Body 3 (of 3)
Number of nodes = 42
Number of elements = 80
Number of triangle elements = 80
Number of quadrilateral elements = 0
----------------------------
Total number of nodes = 516
Total number of elements = 1020
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = dummy_att, index = 1
Body 1 number of surface: nodes - 376, elements - 748
Body 2 number of surface: nodes - 98, elements - 192
Body 3 number of surface: nodes - 42, elements - 80
Getting volume mesh
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Done meshing using TetGen!
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = dummy_att, index = 1
Body 1 number of surface: nodes - 376, elements - 748
Body 2 number of surface: nodes - 98, elements - 192
Body 3 number of surface: nodes - 42, elements - 80
Getting volume mesh for body 1 (of 3)
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = dummy_att, index = 1
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Done meshing using TetGen!
Getting volume mesh for body 2 (of 3)
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = dummy_att, index = 1
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Done meshing using TetGen!
Getting volume mesh for body 3 (of 3)
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = dummy_att, index = 1
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Done meshing using TetGen!
../csmData/MultiDomain/example6.csm
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = dummy_att, index = 1
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 0
Getting surface mesh for body 1 (of 3)
Getting surface mesh for body 2 (of 3)
Getting surface mesh for body 3 (of 3)
Body 1 (of 3)
Number of nodes = 370
Number of elements = 736
Number of triangle elements = 736
Number of quadrilateral elements = 0
Body 2 (of 3)
Number of nodes = 42
Number of elements = 80
Number of triangle elements = 80
Number of quadrilateral elements = 0
Body 3 (of 3)
Number of nodes = 42
Number of elements = 80
Number of triangle elements = 80
Number of quadrilateral elements = 0
----------------------------
Total number of nodes = 454
Total number of elements = 896
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = dummy_att, index = 1
Body 1 number of surface: nodes - 370, elements - 736
Body 2 number of surface: nodes - 42, elements - 80
Body 3 number of surface: nodes - 42, elements - 80
Getting volume mesh
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Done meshing using TetGen!
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = dummy_att, index = 1
Body 1 number of surface: nodes - 370, elements - 736
Body 2 number of surface: nodes - 42, elements - 80
Body 3 number of surface: nodes - 42, elements - 80
Getting volume mesh for body 1 (of 3)
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = dummy_att, index = 1
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Done meshing using TetGen!
Getting volume mesh for body 2 (of 3)
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = dummy_att, index = 1
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Done meshing using TetGen!
Getting volume mesh for body 3 (of 3)
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = dummy_att, index = 1
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Done meshing using TetGen!
../csmData/MultiDomain/example7.csm
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = dummy_att, index = 1
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 0
Getting surface mesh for body 1 (of 3)
Getting surface mesh for body 2 (of 3)
Getting surface mesh for body 3 (of 3)
Body 1 (of 3)
Number of nodes = 370
Number of elements = 736
Number of triangle elements = 736
Number of quadrilateral elements = 0
Body 2 (of 3)
Number of nodes = 126
Number of elements = 252
Number of triangle elements = 252
Number of quadrilateral elements = 0
Body 3 (of 3)
Number of nodes = 20
Number of elements = 36
Number of triangle elements = 36
Number of quadrilateral elements = 0
----------------------------
Total number of nodes = 516
Total number of elements = 1024
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = dummy_att, index = 1
Body 1 number of surface: nodes - 370, elements - 736
Body 2 number of surface: nodes - 126, elements - 252
Body 3 number of surface: nodes - 20, elements - 36
Getting volume mesh
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Done meshing using TetGen!
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = dummy_att, index = 1
Body 1 number of surface: nodes - 370, elements - 736
Body 2 number of surface: nodes - 126, elements - 252
Body 3 number of surface: nodes - 20, elements - 36
Getting volume mesh for body 1 (of 3)
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = dummy_att, index = 1
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Done meshing using TetGen!
Getting volume mesh for body 2 (of 3)
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = dummy_att, index = 1
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Done meshing using TetGen!
Getting volume mesh for body 3 (of 3)
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = dummy_att, index = 1
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Done meshing using TetGen!
../csmData/MultiDomain/example8.csm
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = dummy_att, index = 1
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 0
Getting surface mesh for body 1 (of 3)
Getting surface mesh for body 2 (of 3)
Getting surface mesh for body 3 (of 3)
Body 1 (of 3)
Number of nodes = 109
Number of elements = 214
Number of triangle elements = 214
Number of quadrilateral elements = 0
Body 2 (of 3)
Number of nodes = 48
Number of elements = 96
Number of triangle elements = 96
Number of quadrilateral elements = 0
Body 3 (of 3)
Number of nodes = 12
Number of elements = 20
Number of triangle elements = 20
Number of quadrilateral elements = 0
----------------------------
Total number of nodes = 169
Total number of elements = 330
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = dummy_att, index = 1
Body 1 number of surface: nodes - 109, elements - 214
Body 2 number of surface: nodes - 48, elements - 96
Body 3 number of surface: nodes - 12, elements - 20
Getting volume mesh
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Done meshing using TetGen!
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = dummy_att, index = 1
Body 1 number of surface: nodes - 109, elements - 214
Body 2 number of surface: nodes - 48, elements - 96
Body 3 number of surface: nodes - 12, elements - 20
Getting volume mesh for body 1 (of 3)
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = dummy_att, index = 1
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Done meshing using TetGen!
Getting volume mesh for body 2 (of 3)
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = dummy_att, index = 1
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Done meshing using TetGen!
Getting volume mesh for body 3 (of 3)
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = dummy_att, index = 1
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Done meshing using TetGen!
../csmData/MultiDomain/example9.csm
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = dummy_att, index = 1
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 0
Getting surface mesh for body 1 (of 2)
Getting surface mesh for body 2 (of 2)
Body 1 (of 2)
Number of nodes = 536
Number of elements = 1072
Number of triangle elements = 1072
Number of quadrilateral elements = 0
Body 2 (of 2)
Number of nodes = 544
Number of elements = 1084
Number of triangle elements = 1084
Number of quadrilateral elements = 0
----------------------------
Total number of nodes = 1080
Total number of elements = 2156
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = dummy_att, index = 1
Body 1 number of surface: nodes - 536, elements - 1072
Body 2 number of surface: nodes - 544, elements - 1084
Getting volume mesh
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Done meshing using TetGen!
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = dummy_att, index = 1
Body 1 number of surface: nodes - 536, elements - 1072
Body 2 number of surface: nodes - 544, elements - 1084
Getting volume mesh for body 1 (of 2)
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = dummy_att, index = 1
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Done meshing using TetGen!
Getting volume mesh for body 2 (of 2)
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = dummy_att, index = 1
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Done meshing using TetGen!
../csmData/MultiDomain/multi_prim.csm
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = dummy_att, index = 1
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 0
Getting surface mesh for body 1 (of 5)
Getting surface mesh for body 2 (of 5)
Getting surface mesh for body 3 (of 5)
Getting surface mesh for body 4 (of 5)
Getting surface mesh for body 5 (of 5)
Body 1 (of 5)
Number of nodes = 1352
Number of elements = 2684
Number of triangle elements = 2684
Number of quadrilateral elements = 0
Body 2 (of 5)
Number of nodes = 288
Number of elements = 572
Number of triangle elements = 572
Number of quadrilateral elements = 0
Body 3 (of 5)
Number of nodes = 173
Number of elements = 342
Number of triangle elements = 342
Number of quadrilateral elements = 0
Body 4 (of 5)
Number of nodes = 26
Number of elements = 48
Number of triangle elements = 48
Number of quadrilateral elements = 0
Body 5 (of 5)
Number of nodes = 482
Number of elements = 960
Number of triangle elements = 960
Number of quadrilateral elements = 0
----------------------------
Total number of nodes = 2321
Total number of elements = 4606
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = dummy_att, index = 1
Body 1 number of surface: nodes - 1352, elements - 2684
Body 2 number of surface: nodes - 288, elements - 572
Body 3 number of surface: nodes - 173, elements - 342
Body 4 number of surface: nodes - 26, elements - 48
Body 5 number of surface: nodes - 482, elements - 960
Getting volume mesh
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Done meshing using TetGen!
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = dummy_att, index = 1
Body 1 number of surface: nodes - 1352, elements - 2684
Body 2 number of surface: nodes - 288, elements - 572
Body 3 number of surface: nodes - 173, elements - 342
Body 4 number of surface: nodes - 26, elements - 48
Body 5 number of surface: nodes - 482, elements - 960
Getting volume mesh for body 1 (of 5)
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = dummy_att, index = 1
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Done meshing using TetGen!
Getting volume mesh for body 2 (of 5)
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = dummy_att, index = 1
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Done meshing using TetGen!
Getting volume mesh for body 3 (of 5)
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = dummy_att, index = 1
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Done meshing using TetGen!
Getting volume mesh for body 4 (of 5)
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = dummy_att, index = 1
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Done meshing using TetGen!
Getting volume mesh for body 5 (of 5)
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = dummy_att, index = 1
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Done meshing using TetGen!
../csmData/MultiDomain/cyl_seam.csm
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = dummy_att, index = 1
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 0
Getting surface mesh for body 1 (of 2)
Getting surface mesh for body 2 (of 2)
Body 1 (of 2)
Number of nodes = 443
Number of elements = 882
Number of triangle elements = 882
Number of quadrilateral elements = 0
Body 2 (of 2)
Number of nodes = 522
Number of elements = 1044
Number of triangle elements = 1044
Number of quadrilateral elements = 0
----------------------------
Total number of nodes = 965
Total number of elements = 1926
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = dummy_att, index = 1
Body 1 number of surface: nodes - 443, elements - 882
Body 2 number of surface: nodes - 522, elements - 1044
Getting volume mesh
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Done meshing using TetGen!
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = dummy_att, index = 1
Body 1 number of surface: nodes - 443, elements - 882
Body 2 number of surface: nodes - 522, elements - 1044
Getting volume mesh for body 1 (of 2)
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = dummy_att, index = 1
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Done meshing using TetGen!
Getting volume mesh for body 2 (of 2)
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = dummy_att, index = 1
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Done meshing using TetGen!
ok
test_journal (test_tetgen.TestTETGEN.test_journal) ... Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 4
Name = Farfield, index = 1
Name = riteWing, index = 2
Name = leftWing, index = 3
Name = trailingEdge, index = 4
Getting mesh sizing parameters
Mesh sizing name - Farfield
Done getting mesh sizing parameters
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Number of surface: nodes - 7161, elements - 14314
Getting volume mesh
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Done meshing using TetGen!
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Number of surface: nodes - 7161, elements - 14314
Getting volume mesh
Generating volume mesh using TetGen.....
Tetgen input string = pYq2.000/0.000QT1.00e-16A
Done meshing using TetGen!
EGADS Info: 0 Objects, 0 Reference in Use (of 0) at Close!
CAPS Info: Hit last success -- going live!
CAPS Info: Hit last success -- going live!
CAPS Info: Hit last success -- going live!
CAPS Info: Hit last success -- going live!
CAPS Info: Hit last success -- going live!
CAPS Info: Hit last success -- going live!
CAPS Info: Hit last success -- going live!
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 4
Name = Farfield, index = 1
Name = riteWing, index = 2
Name = leftWing, index = 3
Name = trailingEdge, index = 4
Getting mesh sizing parameters
Mesh sizing name - Farfield
Done getting mesh sizing parameters
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Number of surface: nodes - 7161, elements - 14314
Getting volume mesh
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Done meshing using TetGen!
CAPS Info: Hit last success -- going live!
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 4
Name = Farfield, index = 1
Name = riteWing, index = 2
Name = leftWing, index = 3
Name = trailingEdge, index = 4
Getting mesh sizing parameters
Mesh sizing name - Farfield
Done getting mesh sizing parameters
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
CAPS Info: Hit last success -- going live!
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 4
Name = Farfield, index = 1
Name = riteWing, index = 2
Name = leftWing, index = 3
Name = trailingEdge, index = 4
Getting mesh sizing parameters
Mesh sizing name - Farfield
Done getting mesh sizing parameters
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
CAPS Info: Hit last success -- going live!
CAPS Info: Hit last success -- going live!
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 4
Name = Farfield, index = 1
Name = riteWing, index = 2
Name = leftWing, index = 3
Name = trailingEdge, index = 4
Getting mesh sizing parameters
Mesh sizing name - Farfield
Done getting mesh sizing parameters
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Number of surface: nodes - 7161, elements - 14314
Getting volume mesh
Generating volume mesh using TetGen.....
Tetgen input string = pYq2.000/0.000QT1.00e-16A
Done meshing using TetGen!
CAPS Info: Hit last success -- going live!
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 4
Name = Farfield, index = 1
Name = riteWing, index = 2
Name = leftWing, index = 3
Name = trailingEdge, index = 4
Getting mesh sizing parameters
Mesh sizing name - Farfield
Done getting mesh sizing parameters
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
ok
test_phase (test_tetgen.TestTETGEN.test_phase) ... Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 4
Name = Farfield, index = 1
Name = riteWing, index = 2
Name = leftWing, index = 3
Name = trailingEdge, index = 4
Getting mesh sizing parameters
Mesh sizing name - Farfield
Done getting mesh sizing parameters
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Number of surface: nodes - 7161, elements - 14314
Getting volume mesh
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Done meshing using TetGen!
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 4
Name = Farfield, index = 1
Name = riteWing, index = 2
Name = leftWing, index = 3
Name = trailingEdge, index = 4
Getting mesh sizing parameters
Mesh sizing name - Farfield
Done getting mesh sizing parameters
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 4
Name = Farfield, index = 1
Name = riteWing, index = 2
Name = leftWing, index = 3
Name = trailingEdge, index = 4
Getting mesh sizing parameters
Mesh sizing name - Farfield
Done getting mesh sizing parameters
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Number of surface: nodes - 5924, elements - 11840
Getting volume mesh
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Done meshing using TetGen!
ok
test_reenter (test_tetgen.TestTETGEN.test_reenter) ... Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 4
Name = Farfield, index = 1
Name = riteWing, index = 2
Name = leftWing, index = 3
Name = trailingEdge, index = 4
Getting mesh sizing parameters
Mesh sizing name - Farfield
Done getting mesh sizing parameters
Getting surface mesh for body 1 (of 1)
Body 1 (of 1)
Number of nodes = 7161
Number of elements = 14314
Number of triangle elements = 14314
Number of quadrilateral elements = 0
----------------------------
Total number of nodes = 7161
Total number of elements = 14314
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Number of surface: nodes - 7161, elements - 14314
Getting volume mesh
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Done meshing using TetGen!
Writing Binary VTK file ....
Finished writing Binary VTK file
Writing vtk file ....
Writing vtk general file ....
Finished writing vtk file
Writing FAST file ....
Finished writing FAST file
Writing SU2 file ....
Finished writing SU2 file
Writing exodus file ....
Block: 'region_1_tet', blk_id 1, num_entries 79504
Sideset: 'Farfield', set_id 1, num_entries 12
Sideset: 'Wing1', set_id 2, num_entries 14302
Finished writing Exodus file
Writing Binary STL file ....
Finished writing Binary STL file
Writing ASCII STL file ....
Finished writing ASCII STL file
Writing Tecplot file ....
Finished writing Tecplot file
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Number of surface: nodes - 7161, elements - 14314
Getting volume mesh
Generating volume mesh using TetGen.....
Tetgen input string = pYq2.000/0.000QT1.00e-16A
Done meshing using TetGen!
Writing Binary VTK file ....
Finished writing Binary VTK file
Writing vtk file ....
Writing vtk general file ....
Finished writing vtk file
Writing FAST file ....
Finished writing FAST file
Writing SU2 file ....
Finished writing SU2 file
Writing exodus file ....
Block: 'region_1_tet', blk_id 1, num_entries 55361
Sideset: 'Farfield', set_id 1, num_entries 12
Sideset: 'Wing1', set_id 2, num_entries 14302
Finished writing Exodus file
Writing Binary STL file ....
Finished writing Binary STL file
Writing ASCII STL file ....
Finished writing ASCII STL file
Writing Tecplot file ....
Finished writing Tecplot file
ok
test_setInput (test_tetgen.TestTETGEN.test_setInput) ... EGADS Info: 0 Objects, 0 Reference in Use (of 0) at Close!
ok
test_Cl (test_xfoil.Testxfoil_Kulfan.test_Cl) ... ok
test_alpha_custom_increment (test_xfoil.Testxfoil_Kulfan.test_alpha_custom_increment) ... ok
test_CL_uniform_increment (test_xfoil.Testxfoil_NACA.test_CL_uniform_increment) ... ok
test_Cl (test_xfoil.Testxfoil_NACA.test_Cl) ... ok
test_alpha_custom_increment (test_xfoil.Testxfoil_NACA.test_alpha_custom_increment) ... ok
test_alpha_uniform_inrement (test_xfoil.Testxfoil_NACA.test_alpha_uniform_inrement) ... ok
test_append (test_xfoil.Testxfoil_NACA.test_append) ... ok
test_normalize (test_xfoil.Testxfoil_NACA.test_normalize) ... ok
test_phase (test_xfoil.Testxfoil_NACA.test_phase) ... ok
test_Output (test_zaero.TestZAERO.test_Output) ... ok
test_inputs (test_zaero.TestZAERO.test_inputs) ... Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 6
Name = Ribs, index = 1
Name = Skin, index = 2
Name = Spar1, index = 3
Name = Rib_Root, index = 4
Name = Spar2, index = 5
Name = Rib_Root_Point, index = 6
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 2
Name = LeadingEdge, index = 1
Name = TrailingEdge, index = 2
Getting surface mesh for body 1 (of 2)
Getting surface mesh for body 2 (of 2)
Body 1 (of 2)
Number of nodes = 1220
Number of elements = 2680
Number of triangle elements = 2680
Number of quadrilateral elements = 0
Body 2 (of 2)
Number of nodes = 1
Number of elements = 0
Number of triangle elements = 0
Number of quadrilateral elements = 0
----------------------------
Total number of nodes = 1221
Total number of elements = 2680
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = Rib_Root_Point, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 0
Mapping capsBound attributes ................
Number of unique capsBound attributes = 1
Name = Skin_Top, index = 1
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 1
Name = Rib_Root, index = 1
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 6
Name = Ribs, index = 1
Name = Skin, index = 2
Name = Spar1, index = 3
Name = Rib_Root, index = 4
Name = Spar2, index = 5
Name = Rib_Root_Point, index = 6
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 1220
Number of elements = 2680
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 2680
Elemental Quad4 = 0
Setting FEA Data
Mesh for body = 1
Number of nodal coordinates = 1
Number of elements = 1
Elemental Nodes = 1
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 0
Combining multiple FEA meshes!
Combined Number of nodal coordinates = 1221
Combined Number of elements = 2681
Combined Elemental Nodes = 1
Combined Elemental Rods = 0
Combined Elemental Tria3 = 2680
Combined Elemental Quad4 = 0
Getting FEA materials.......
Number of materials - 1
Material name - madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 6
Property name - Rib_Root
Property name - Rib_Root_Point
Property name - Ribs
Property name - Skin
Property name - Spar1
Property name - Spar2
Done getting FEA properties
Updating mesh element types based on properties input
'Smart_Restart' is ON
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = Wing, index = 1
Getting vortex lattice surface data
VLM surface name - WingSurface
Done getting vortex lattice surface data
Getting vortex lattice control surface data
VLM control surface name - CntrlLE
VLM control surface name - CntrlTE
Done getting vortex lattice control surface data
Getting FEA vortex lattice mesh
Getting ZAERO UAIC Configurations.......
Number of UAIC Configurations - 2
UAIC Configuration: climb, id = 1
- Mach Number : 0.200000
- Reduced Freq: [0.020000, ... , 0.250000]
UAIC Configuration: cruise, id = 2
- Mach Number : 0.700000
- Reduced Freq: [0.040000, ... , 0.350000]
Getting ZAERO Analysis Subcases.......
Number of Analysis Subcases - 2
Analysis Subcase: FlutterCruise, id = 1
- Discipline : flutter
- UAIC : cruise
Analysis Subcase: Trim, id = 2
- Discipline : Trim
- UAIC : climb
Getting ZAERO Trim Variables.......
Number of Trim Variables - 2
Trim Variable: ANGLEA
- Label : ALPHA
- Value : free
Trim Variable: URDD3
- Label : NZ
- Value : 1.0
Updating StaticAeroelastic subcase: Trim
- vectorToCG -> [0.345898, 1.652951, -0.041403]
- weight -> 476456.149985
- weightMomentOfInertia -> [304902.643270, 98963.803820, 69822.813290, 6179.981375, 19723.152207, 370546.335523]
ok
----------------------------------------------------------------------
Ran 152 tests in 1250.112s
OK (skipped=10)
+ cd /Users/jenkins/workspace/ESP_Beta/7.7/DARWIN64/EngSketchPad/CAPSexamples/
+ make test TYPE=MINIMAL
(make -C cCAPS -f aeroelastic_SU2.make)
make[1]: `aeroelasticSimple_Iterative_SU2_and_MystranTest' is up to date.
(make -C cCAPS -f avlTest.make)
make[1]: `avlTest' is up to date.
(make -C cCAPS -f awaveTest.make)
make[1]: `awaveTest' is up to date.
(make -C cCAPS -f frictionTest.make)
make[1]: `frictionTest' is up to date.
(make -C cCAPS -f fun3d.make)
make[1]: Nothing to be done for `fun3d'.
(make -C cCAPS -f hsm.make)
make[1]: `hsm' is up to date.
(make -C cCAPS -f interferenceTest.make)
make[1]: `interferenceTest' is up to date.
(make -C cCAPS -f msesTest.make)
make[1]: `msesTest' is up to date.
(make -C cCAPS -f mystran.make)
make[1]: `mystranTest' is up to date.
(make -C cCAPS -f pointwiseTest.make)
make[1]: `pointwiseTest' is up to date.
(cd ./regressionTest; ./execute_CTestRegression.sh MINIMAL)
Running.... MINIMAL c-Tests
All tests pass!
=================================================
=================================================
(cd ./regressionTest; ./execute_PyTestRegression.sh MINIMAL)
=================================================
Using python : /Users/jenkins/workspace/ESP_Beta/7.7/DARWIN64/ESP_venv/bin/python
=================================================
Running.... MINIMAL PyTests
=================================================
+ echo 'avl_PyTest.py test;'
+ tee -a /Users/jenkins/workspace/ESP_Beta/7.7/DARWIN64/EngSketchPad/CAPSexamples/regressionTest/pyCAPSlog.txt
avl_PyTest.py test;
+ python -u avl_PyTest.py -outLevel=0
+ tee -a /Users/jenkins/workspace/ESP_Beta/7.7/DARWIN64/EngSketchPad/CAPSexamples/regressionTest/pyCAPSlog.txt
Loading AIM
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = Wing, index = 1
Getting vortex lattice surface data
VLM surface name - Wing
Done getting vortex lattice surface data
Writing surface - Wing (ID = 0)
Section 1 of 3 (ID = 0)
Section 2 of 3 (ID = 1)
Section 3 of 3 (ID = 2)
CXtot 0.0006119078685747781
CYtot -6.297054052850572e-15
CZtot -0.301286139488597
Cltot -4.785942150399569e-14
Cmtot -0.1945055953450375
Cntot -2.337286621027519e-15
Cl'tot -4.789292355835892e-14
Cn'tot -1.501668565013235e-15
CLtot 0.3012509314150652
CDtot 0.004646353488232536
CDvis 0.0
CLff 0.3009503023520406
CYff -7.725269974775701e-15
CDind 0.004646353488232536
CDff 0.004968969500907968
e 0.9669902146157809
StripForces
Wing cl = [0.02994790451347, 0.08555545178933, 0.1329003532587, 0.1733025192695, 0.2100182422833, 0.2453427152547, 0.2792746996365, 0.310122128419, 0.3355632628223, 0.3531618776075, 0.3603457261533, 0.3542128805664, 0.3542128805661, 0.3603457261533, 0.3531618776088, 0.3355632628252, 0.3101221284236, 0.2792746996427, 0.2453427152623, 0.2100182422922, 0.17330251928, 0.1329003532723, 0.08555545180787, 0.0299479045408]
Wing cd = [-0.004234137763162, -0.004494543653191, -0.003752887372724, -0.002739626801633, -0.001762021024326, -0.0007386538946408, 0.0005114598078391, 0.0021191472861, 0.004145189908974, 0.006609094404181, 0.009540018987595, 0.01315518814708, 0.01315518814718, 0.009540018987792, 0.006609094404439, 0.00414518990926, 0.002119147286384, 0.0005114598080994, -0.0007386538944075, -0.001762021024096, -0.002739626801367, -0.003752887372445, -0.004494543653161, -0.004234137764544]
real 0m2.164s
user 0m0.778s
sys 0m0.594s
+ status=0
+ set +x
=================================================
CAPS verification (using pyCAPS) case avl_PyTest.py passed (as expected)
=================================================
=================================================
+ echo 'xfoil_PyTest.py test;'
+ tee -a /Users/jenkins/workspace/ESP_Beta/7.7/DARWIN64/EngSketchPad/CAPSexamples/regressionTest/pyCAPSlog.txt
xfoil_PyTest.py test;
+ python -u xfoil_PyTest.py -outLevel=0 -noPlotData
+ tee -a /Users/jenkins/workspace/ESP_Beta/7.7/DARWIN64/EngSketchPad/CAPSexamples/regressionTest/pyCAPSlog.txt
Cl = [1.05475230552582, 1.36488869373661, 1.5660721427212, 2.03059709333553, 1.9727108312101, 1.87307153172578, 1.7605047576016]
Cd = [0.0131991208675814, 0.0166540240605919, 0.0200551482562995, 0.0458671342053759, 0.0754256009396578, 0.0994469174476091, 0.12747943098905]
Alpha = [0.0, 3.0, 5.0, 11.0, 13.0, 14.0, 15.0]
Transition location = [0.496044114417512, 0.46137773204127, 0.442376568201482, 0.361251636517606, 0.27610414085319, 0.214381239319572, 0.132988264746184]
real 0m5.210s
user 0m4.909s
sys 0m0.227s
+ status=0
+ set +x
=================================================
CAPS verification (using pyCAPS) case xfoil_PyTest.py passed (as expected)
=================================================
=================================================
+ echo 'mses_PyTest.py test;'
+ tee -a /Users/jenkins/workspace/ESP_Beta/7.7/DARWIN64/EngSketchPad/CAPSexamples/regressionTest/pyCAPSlog.txt
mses_PyTest.py test;
+ python -u mses_PyTest.py -outLevel=0 -noPlotData
+ tee -a /Users/jenkins/workspace/ESP_Beta/7.7/DARWIN64/EngSketchPad/CAPSexamples/regressionTest/pyCAPSlog.txt
Cl = 0.3783793240300122
Cd = 0.007775858044231098
Cm = 0.005262576090314894
real 0m4.036s
user 0m3.550s
sys 0m0.313s
+ status=0
+ set +x
=================================================
CAPS verification (using pyCAPS) case mses_PyTest.py passed (as expected)
=================================================
=================================================
+ echo 'friction_PyTest.py test;'
+ tee -a /Users/jenkins/workspace/ESP_Beta/7.7/DARWIN64/EngSketchPad/CAPSexamples/regressionTest/pyCAPSlog.txt
friction_PyTest.py test;
+ python -u friction_PyTest.py -outLevel=0
+ tee -a /Users/jenkins/workspace/ESP_Beta/7.7/DARWIN64/EngSketchPad/CAPSexamples/regressionTest/pyCAPSlog.txt
Loading AIM
Setting Mach & Altitude Values
Lifting Surface: Body = 1, units m
XLE: 1.571946 -3.872983 0.249728
XTE: 2.536563 -3.872983 0.335335
Chord: 0.968408
Arc: 1.985181
T/C: 0.155975
Type: Wing
Lifting Surface: Body = 2, units m
XLE: 0.000000 0.000000 0.000000
XTE: 1.614012 0.000000 0.002015
Chord: 1.614013
Arc: 3.308635
T/C: 0.127839
Type: Wing
Lifting Surface: Body = 3, units m
XLE: 1.571946 3.872983 0.249728
XTE: 2.536563 3.872983 0.335335
Chord: 0.968408
Arc: 1.985181
T/C: 0.155975
Type: Wing
Lifting Surface: Body = 4, units m
XLE: 5.484123 0.000000 1.468246
XTE: 6.210307 0.000915 1.468246
Chord: 0.726185
Arc: 1.482717
T/C: 0.120035
Type: VTail
Lifting Surface: Body = 5, units m
XLE: 5.000000 0.000000 0.500000
XTE: 6.210307 0.001525 0.500000
Chord: 1.210308
Arc: 2.471195
T/C: 0.120035
Type: VTail
Lifting Surface: Body = 6, units m
XLE: 5.484123 -0.968246 0.500000
XTE: 6.210307 -0.968246 0.500915
Chord: 0.726185
Arc: 1.482717
T/C: 0.120035
Type: HTail
Lifting Surface: Body = 7, units m
XLE: 5.484123 0.968246 0.500000
XTE: 6.210307 0.968246 0.500915
Chord: 0.726185
Arc: 1.482717
T/C: 0.120035
Type: HTail
Body of Revolution: Body = 8, units m
Arc: 0.000000
Diameter: 0.000000
Type: Fuse
Body of Revolution: Body = 9, units m
Arc: 3.714180
Diameter: 1.020621
Type: Fuse
Body of Revolution: Body = 10, units m
Arc: 2.771209
Diameter: 0.645497
Type: Fuse
Body of Revolution: Body = 11, units m
Arc: 1.013945
Diameter: 0.322749
Type: Fuse
Body of Revolution: Body = 12, units m
Arc: 0.101394
Diameter: 0.032275
Type: Fuse
Number of sections 4, number of revolution sections 1
Number of Mach-Altitude cases = 2
Total drag = [0.0132, 0.01226]
Form drag = [0.0033, 0.00307]
Friction drag = [0.0099, 0.00919]
real 0m2.039s
user 0m0.598s
sys 0m0.238s
+ status=0
+ set +x
=================================================
CAPS verification (using pyCAPS) case friction_PyTest.py passed (as expected)
=================================================
=================================================
+ echo 'tsfoil_PyTest.py test;'
+ tee -a /Users/jenkins/workspace/ESP_Beta/7.7/DARWIN64/EngSketchPad/CAPSexamples/regressionTest/pyCAPSlog.txt
tsfoil_PyTest.py test;
+ python -u tsfoil_PyTest.py -outLevel=0
+ tee -a /Users/jenkins/workspace/ESP_Beta/7.7/DARWIN64/EngSketchPad/CAPSexamples/regressionTest/pyCAPSlog.txt
Getting results
PAUSE Press the ENTER key to exit
To resume execution, type go. Other input will terminate the job.
Cl = 0.933417
Cd = 0.000284
Cd Wave = 0.0
Cm = -0.203436
Cp _Critcal = -1.303869
real 0m1.368s
user 0m0.573s
sys 0m0.184s
+ status=0
+ set +x
=================================================
CAPS verification (using pyCAPS) case tsfoil_PyTest.py passed (as expected)
=================================================
=================================================
+ echo 'delaundo_PyTest.py test;'
+ tee -a /Users/jenkins/workspace/ESP_Beta/7.7/DARWIN64/EngSketchPad/CAPSexamples/regressionTest/pyCAPSlog.txt
delaundo_PyTest.py test;
+ python -u delaundo_PyTest.py -outLevel=0
+ tee -a /Users/jenkins/workspace/ESP_Beta/7.7/DARWIN64/EngSketchPad/CAPSexamples/regressionTest/pyCAPSlog.txt
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 6
Name = 2DSlice, index = 1
Name = TunnelWall, index = 2
Name = OutFlow, index = 3
Name = InFlow, index = 4
Name = Airfoil, index = 5
Name = AirfoilTE, index = 6
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 6
Name = 2DSlice, index = 1
Name = TunnelWall, index = 2
Name = OutFlow, index = 3
Name = InFlow, index = 4
Name = Airfoil, index = 5
Name = AirfoilTE, index = 6
Getting mesh sizing parameters
Mesh sizing name - Airfoil
Mesh sizing name - AirfoilTE
Mesh sizing name - InFlow
Mesh sizing name - OutFlow
Mesh sizing name - TunnelWall
Done getting mesh sizing parameters
Getting edge discretization for body 1
Delaundo expects 2D meshes in the x-y plane... attempting to rotate mesh through node swapping!
Swapping z and y coordinates!
Writing delaundo control file - delaundo.ctr
Writing out *.pts file
Reading delaundo mesh file - delaundo_CAPS.mesh
Swapping y and z coordinates!
Writing Tecplot file ....
Tecplot expects 2D meshes in the x-y plane... attempting to rotate mesh!
Swapping z and y coordinates!
Finished writing Tecplot file
Writing ugrid file ....
Finished writing ugrid file
real 0m1.647s
user 0m0.874s
sys 0m0.436s
+ status=0
+ set +x
=================================================
CAPS verification (using pyCAPS) case delaundo_PyTest.py passed (as expected)
=================================================
=================================================
+ echo 'egadsTess_PyTest.py test;'
+ tee -a /Users/jenkins/workspace/ESP_Beta/7.7/DARWIN64/EngSketchPad/CAPSexamples/regressionTest/pyCAPSlog.txt
egadsTess_PyTest.py test;
+ python -u egadsTess_PyTest.py -outLevel=0
+ tee -a /Users/jenkins/workspace/ESP_Beta/7.7/DARWIN64/EngSketchPad/CAPSexamples/regressionTest/pyCAPSlog.txt
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 7
Name = Ribs, index = 1
Name = Skin, index = 2
Name = Spar1, index = 3
Name = Rib_Root, index = 4
Name = Spar2, index = 5
Name = Rib_Root_Point, index = 6
Name = Wing, index = 7
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 2
Name = LeadingEdge, index = 1
Name = TrailingEdge, index = 2
Getting mesh sizing parameters
Mesh sizing name - LeadingEdge
Done getting mesh sizing parameters
Getting surface mesh for body 1 (of 4)
Getting surface mesh for body 2 (of 4)
Getting surface mesh for body 3 (of 4)
Getting surface mesh for body 4 (of 4)
Body 1 (of 4)
Number of nodes = 3793
Number of elements = 4001
Number of triangle elements = 0
Number of quadrilateral elements = 4001
Body 2 (of 4)
Number of nodes = 1
Number of elements = 0
Number of triangle elements = 0
Number of quadrilateral elements = 0
Body 3 (of 4)
Number of nodes = 76
Number of elements = 55
Number of triangle elements = 0
Number of quadrilateral elements = 55
Body 4 (of 4)
Number of nodes = 100
Number of elements = 73
Number of triangle elements = 0
Number of quadrilateral elements = 73
----------------------------
Total number of nodes = 3970
Total number of elements = 4129
Writing Tecplot file ....
Finished writing Tecplot file
Writing ASCII STL file ....
Finished writing ASCII STL file
Writing ugrid file ....
Finished writing ugrid file
real 0m7.946s
user 0m18.919s
sys 0m4.713s
+ status=0
+ set +x
=================================================
CAPS verification (using pyCAPS) case egadsTess_PyTest.py passed (as expected)
=================================================
=================================================
+ echo 'aflr2_PyTest.py test;'
+ tee -a /Users/jenkins/workspace/ESP_Beta/7.7/DARWIN64/EngSketchPad/CAPSexamples/regressionTest/pyCAPSlog.txt
aflr2_PyTest.py test;
+ python -u aflr2_PyTest.py -outLevel=0
+ tee -a /Users/jenkins/workspace/ESP_Beta/7.7/DARWIN64/EngSketchPad/CAPSexamples/regressionTest/pyCAPSlog.txt
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 5
Name = 2DSlice, index = 1
Name = TunnelWall, index = 2
Name = OutFlow, index = 3
Name = InFlow, index = 4
Name = Airfoil, index = 5
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 4
Name = TunnelWall, index = 1
Name = OutFlow, index = 2
Name = InFlow, index = 3
Name = Airfoil, index = 4
Getting mesh sizing parameters
Mesh sizing name - 2DSlice
Mesh sizing name - Airfoil
Mesh sizing name - InFlow
Mesh sizing name - OutFlow
Mesh sizing name - TunnelWall
Done getting mesh sizing parameters
Getting 2D mesh for body 1 (of 1)
AFLR2 : ---------------------------------------
AFLR2 : AFLR2 LIBRARY
AFLR2 : ADVANCING-FRONT/LOCAL-RECONNECTION
AFLR2 : TRIA/QUAD GRID GENERATOR
AFLR2 : Version Number 9.18.1
AFLR2 : Version Date 06/11/24 @ 05:52PM
AFLR2 : Compile OS Darwin 23.4.0 x86_64
AFLR2 : Compile Date 06/11/24 @ 06:29PM
AFLR2 : Copyright 1994-2021, D.L. Marcum
AFLR2 : ---------------------------------------
AFLR2 IC : INPUT DATA CHECK
AFLR2 IC : Nodes, Faces = 344 0
AFLR2 : CPU Time = 0.000 seconds
AFLR2 EG : EDGE GRID RE-GENERATION
AFLR2 EG : Nodes, Edges = 344 344
AFLR2 : CPU Time = 0.000 seconds
AFLR2 IG : INITIAL GRID GENERATION
AFLR2 IG : Nodes, Faces = 0 2
AFLR2 IG : Nodes, Faces = 70 142
AFLR2 IG : Nodes, Faces = 140 282
AFLR2 IG : Nodes, Faces = 210 422
AFLR2 IG : Nodes, Faces = 280 562
AFLR2 IG : Nodes, Faces = 316 634
AFLR2 IG : Nodes, Faces = 344 690
AFLR2 IG : Nodes, Faces = 348 690
AFLR2 IG : Nodes, Faces = 344 344
AFLR2 : CPU Time = 0.001 seconds
AFLR2 GG : FIELD GRID GENERATION
AFLR2 GGp: Nodes, Faces = 344 344
AFLR2 GGp: Nodes, Faces = 681 1018
AFLR2 GGp: Nodes, Faces = 1013 1682
AFLR2 GGp: Nodes, Faces = 1339 2334
AFLR2 GGp: Nodes, Faces = 1652 2960
AFLR2 GGp: Nodes, Faces = 1957 3570
AFLR2 GGp: Nodes, Faces = 2252 4160
AFLR2 GGp: Nodes, Faces = 2526 4708
AFLR2 GGp: Nodes, Faces = 2809 5274
AFLR2 GGp: Nodes, Faces = 3083 5822
AFLR2 GGp: Nodes, Faces = 3327 6310
AFLR2 GGp: Nodes, Faces = 3564 6784
AFLR2 GGp: Nodes, Faces = 3788 7232
AFLR2 GGp: Nodes, Faces = 3995 7646
AFLR2 GGp: Nodes, Faces = 4194 8044
AFLR2 GGp: Nodes, Faces = 4394 8444
AFLR2 GGp: Nodes, Faces = 4585 8826
AFLR2 GGp: Nodes, Faces = 4772 9200
AFLR2 GGp: Nodes, Faces = 4943 9542
AFLR2 GGp: Nodes, Faces = 5129 9914
AFLR2 GGp: Nodes, Faces = 5293 10242
AFLR2 GGp: Nodes, Faces = 5447 10550
AFLR2 GGp: Nodes, Faces = 5594 10844
AFLR2 GGp: Nodes, Faces = 5716 11088
AFLR2 GGp: Nodes, Faces = 5830 11316
AFLR2 GGp: Nodes, Faces = 5909 11474
AFLR2 GGp: Nodes, Faces = 5964 11584
AFLR2 GGp: Nodes, Faces = 6006 11668
AFLR2 GGp: Nodes, Faces = 6025 11706
AFLR2 GGp: Nodes, Faces = 6034 11724
AFLR2 : CPU Time = 0.018 seconds
AFLR2 QI : QUALITY IMPROVEMENT
AFLR2 QI : Nodes, Faces = 6034 11724
AFLR2 QI : Nodes, Faces = 6033 454
AFLR2 QI : Nodes, Faces = 6033 5634
AFLR2 QI : Nodes, Faces = 6033 11722
AFLR2 QI : Nodes, Faces = 6032 462
AFLR2 QI : Nodes, Faces = 6032 5629
AFLR2 QI : Nodes, Faces = 6032 11720
AFLR2 QI : Nodes, Faces = 6032 456
AFLR2 QI : Nodes, Faces = 6032 5632
AFLR2 QI : Nodes, Faces = 6032 11720
AFLR2 QI : Nodes, Faces = 6032 474
AFLR2 QI : Nodes, Faces = 6032 5623
AFLR2 QI : Nodes, Faces = 6032 11720
AFLR2 QI : Nodes, Faces = 6031 486
AFLR2 QI : Nodes, Faces = 6031 5616
AFLR2 QI : Nodes, Faces = 6031 488
AFLR2 QI : Nodes, Faces = 6031 5616
AFLR2 : CPU Time = 0.010 seconds
AFLR2 : DONE
EGADS Internal: Face 1, Side 4741 4722 complete [but 7915] (EG_makeConnect)!
EGADS Internal: Face 1, Side 4741 4912 complete [but 7916] (EG_makeConnect)!
EGADS Internal: Face 1, Side 5850 5858 complete [but 8742] (EG_makeConnect)!
EGADS Internal: Face 1, Side 5850 5851 complete [but 8742] (EG_makeConnect)!
EGADS Internal: Face 1, Side 5858 5851 complete [but 8791] (EG_makeConnect)!
EGADS Internal: Face 1, Side 4912 4722 complete [but 9417] (EG_makeConnect)!
Writing AFLR3 file ....
Finished writing AFLR3 file
Number of nodes = 6031
Number of elements = 6448
Number of tris = 488
Number of quad = 5616
EGADS Internal: Face 1, Side 4741 4722 complete [but 7915] (EG_makeConnect)!
EGADS Internal: Face 1, Side 4741 4912 complete [but 7916] (EG_makeConnect)!
EGADS Internal: Face 1, Side 5850 5858 complete [but 8742] (EG_makeConnect)!
EGADS Internal: Face 1, Side 5850 5851 complete [but 8742] (EG_makeConnect)!
EGADS Internal: Face 1, Side 5858 5851 complete [but 8791] (EG_makeConnect)!
EGADS Internal: Face 1, Side 4912 4722 complete [but 9417] (EG_makeConnect)!
EGADS Internal: Face 1, Side 4741 4722 complete [but 7915] (EG_makeConnect)!
EGADS Internal: Face 1, Side 4741 4912 complete [but 7916] (EG_makeConnect)!
EGADS Internal: Face 1, Side 5850 5858 complete [but 8742] (EG_makeConnect)!
EGADS Internal: Face 1, Side 5850 5851 complete [but 8742] (EG_makeConnect)!
EGADS Internal: Face 1, Side 5858 5851 complete [but 8791] (EG_makeConnect)!
EGADS Internal: Face 1, Side 4912 4722 complete [but 9417] (EG_makeConnect)!
Writing Tecplot file ....
Tecplot expects 2D meshes in the x-y plane... attempting to rotate mesh!
Swapping z and y coordinates!
Finished writing Tecplot file
real 0m1.165s
user 0m1.047s
sys 0m0.474s
+ status=0
+ set +x
=================================================
CAPS verification (using pyCAPS) case aflr2_PyTest.py passed (as expected)
=================================================
=================================================
+ echo 'aflr4_and_aflr3_PyTest.py test;'
+ tee -a /Users/jenkins/workspace/ESP_Beta/7.7/DARWIN64/EngSketchPad/CAPSexamples/regressionTest/pyCAPSlog.txt
aflr4_and_aflr3_PyTest.py test;
+ python -u aflr4_and_aflr3_PyTest.py -outLevel=0
+ tee -a /Users/jenkins/workspace/ESP_Beta/7.7/DARWIN64/EngSketchPad/CAPSexamples/regressionTest/pyCAPSlog.txt
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 4
Name = Wing1, index = 1
Name = Wing2, index = 2
Name = Wake, index = 3
Name = Farfield, index = 4
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 4
Name = Wing1, index = 1
Name = Wing2, index = 2
Name = Wake, index = 3
Name = Farfield, index = 4
AFLR4 : Proximity BG Surface Grid Generation Skipped
AFLR4 : No Modifications Required
Writing Tecplot file ....
Finished writing Tecplot file
Writing ASCII STL file ....
Finished writing ASCII STL file
Writing ugrid file ....
Finished writing ugrid file
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 4
Name = Wing1, index = 1
Name = Wing2, index = 2
Name = Wake, index = 3
Name = Farfield, index = 4
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 4
Name = Wing1, index = 1
Name = Wing2, index = 2
Name = Wake, index = 3
Name = Farfield, index = 4
Getting mesh sizing parameters
Mesh sizing name - Wing1
Mesh sizing name - Wing2
Done getting mesh sizing parameters
Getting volume mesh
AFLR2 : ---------------------------------------
AFLR2 : AFLR2 LIBRARY
AFLR2 : ADVANCING-FRONT/LOCAL-RECONNECTION
AFLR2 : TRIA/QUAD GRID GENERATOR
AFLR2 : Version Number 9.18.1
AFLR2 : Version Date 06/11/24 @ 05:52PM
AFLR2 : Compile OS Darwin 23.4.0 x86_64
AFLR2 : Compile Date 06/11/24 @ 06:29PM
AFLR2 : Copyright 1994-2021, D.L. Marcum
AFLR2 : ---------------------------------------
AFLR4 : ---------------------------------------
AFLR4 : AFLR4 LIBRARY
AFLR4 : ADVANCING-FRONT/LOCAL-RECONNECTION
AFLR4 : TRIA/QUAD SURFACE GRID GENERATOR
AFLR4 : Version Number 11.5.15
AFLR4 : Version Date 07/19/24 @ 07:04PM
AFLR4 : Compile OS Darwin 23.5.0 x86_64
AFLR4 : Compile Date 07/19/24 @ 07:21PM
AFLR4 : Copyright 1994-2021, D.L. Marcum
AFLR4 : ---------------------------------------
EGADS : ---------------------------------------
EGADS : Engineering Geometry Aircraft Design System
EGADS : Version 1.26
EGADS : OpenCASCADE Version 7.7.0
EGADS : ---------------------------------------
EGADS : ---------------------------------------
EGADS : Engineering Geometry Aircraft Design System
EGADS : Version 1.26
EGADS : OpenCASCADE Version 7.7.0
EGADS : ---------------------------------------
Volume mesh:
Number of nodes = 151209
Number of elements = 455692
Number of triangles = 14380
Number of quadrilatarals = 0
Number of tetrahedrals = 220260
Number of pyramids = 425
Number of prisms = 220627
Number of hexahedrals = 0
Writing Tecplot file ....
Finished writing Tecplot file
real 0m18.085s
user 0m16.444s
sys 0m0.814s
+ status=0
+ set +x
=================================================
CAPS verification (using pyCAPS) case aflr4_and_aflr3_PyTest.py passed (as expected)
=================================================
=================================================
+ echo 'tetgen_PyTest.py test;'
+ tee -a /Users/jenkins/workspace/ESP_Beta/7.7/DARWIN64/EngSketchPad/CAPSexamples/regressionTest/pyCAPSlog.txt
tetgen_PyTest.py test;
+ python -u tetgen_PyTest.py -outLevel=0
+ tee -a /Users/jenkins/workspace/ESP_Beta/7.7/DARWIN64/EngSketchPad/CAPSexamples/regressionTest/pyCAPSlog.txt
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 3
Name = Wing1, index = 1
Name = Wing2, index = 2
Name = Farfield, index = 3
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 3
Name = Wing1, index = 1
Name = Wing2, index = 2
Name = Farfield, index = 3
Getting surface mesh for body 1 (of 3)
Getting surface mesh for body 2 (of 3)
Getting surface mesh for body 3 (of 3)
Body 1 (of 3)
Number of nodes = 2236
Number of elements = 4468
Number of triangle elements = 4468
Number of quadrilateral elements = 0
Body 2 (of 3)
Number of nodes = 636
Number of elements = 1268
Number of triangle elements = 1268
Number of quadrilateral elements = 0
Body 3 (of 3)
Number of nodes = 265
Number of elements = 526
Number of triangle elements = 526
Number of quadrilateral elements = 0
----------------------------
Total number of nodes = 3137
Total number of elements = 6262
Writing Tecplot file ....
Finished writing Tecplot file
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 3
Name = Wing1, index = 1
Name = Wing2, index = 2
Name = Farfield, index = 3
Number of surface: nodes - 3137, elements - 6262
Getting volume mesh
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.027938
Creating surface mesh ...
Surface mesh seconds: 0.007438
Recovering boundaries...
Boundary recovery seconds: 0.063738
Removing exterior tetrahedra ...
Spreading region attributes.
Exterior tets removal seconds: 0.009062
Suppressing Steiner points ...
Steiner suppression seconds: 2.1e-05
Recovering Delaunayness...
Delaunay recovery seconds: 0.012568
Refining mesh...
4188 insertions, added 2185 points, 134452 tetrahedra in queue.
1394 insertions, added 466 points, 139158 tetrahedra in queue.
1858 insertions, added 424 points, 135152 tetrahedra in queue.
2477 insertions, added 444 points, 115259 tetrahedra in queue.
3302 insertions, added 499 points, 69620 tetrahedra in queue.
4401 insertions, added 357 points, 954 tetrahedra in queue.
Refinement seconds: 0.863544
Smoothing vertices...
Mesh smoothing seconds: 0.512246
Improving mesh...
Mesh improvement seconds: 0.013398
Jettisoning redundant points.
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.003025
Total running seconds: 1.51342
Statistics:
Input points: 3137
Input facets: 6262
Input segments: 9393
Input holes: 2
Input regions: 0
Mesh points: 7994
Mesh tetrahedra: 39231
Mesh faces: 81593
Mesh faces on exterior boundary: 6262
Mesh faces on input facets: 6262
Mesh edges on input segments: 9393
Steiner points inside domain: 4857
Done meshing using TetGen!
Writing Tecplot file ....
Finished writing Tecplot file
real 0m3.744s
user 0m3.243s
sys 0m0.434s
+ status=0
+ set +x
=================================================
CAPS verification (using pyCAPS) case tetgen_PyTest.py passed (as expected)
=================================================
=================================================
+ echo 'su2_and_AFLR2_PyTest.py test;'
+ tee -a /Users/jenkins/workspace/ESP_Beta/7.7/DARWIN64/EngSketchPad/CAPSexamples/regressionTest/pyCAPSlog.txt
su2_and_AFLR2_PyTest.py test;
+ python -u su2_and_AFLR2_PyTest.py -outLevel=0
+ tee -a /Users/jenkins/workspace/ESP_Beta/7.7/DARWIN64/EngSketchPad/CAPSexamples/regressionTest/pyCAPSlog.txt
Saving geometry
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 5
Name = 2DSlice, index = 1
Name = TunnelWall, index = 2
Name = OutFlow, index = 3
Name = InFlow, index = 4
Name = Airfoil, index = 5
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 4
Name = TunnelWall, index = 1
Name = OutFlow, index = 2
Name = InFlow, index = 3
Name = Airfoil, index = 4
Getting mesh sizing parameters
Mesh sizing name - 2DSlice
Mesh sizing name - Airfoil
Mesh sizing name - InFlow
Mesh sizing name - OutFlow
Mesh sizing name - TunnelWall
Done getting mesh sizing parameters
Getting 2D mesh for body 1 (of 1)
AFLR2 : ---------------------------------------
AFLR2 : AFLR2 LIBRARY
AFLR2 : ADVANCING-FRONT/LOCAL-RECONNECTION
AFLR2 : TRIA/QUAD GRID GENERATOR
AFLR2 : Version Number 9.18.1
AFLR2 : Version Date 06/11/24 @ 05:52PM
AFLR2 : Compile OS Darwin 23.4.0 x86_64
AFLR2 : Compile Date 06/11/24 @ 06:29PM
AFLR2 : Copyright 1994-2021, D.L. Marcum
AFLR2 : ---------------------------------------
AFLR2 IC : INPUT DATA CHECK
AFLR2 IC : Nodes, Faces = 545 0
AFLR2 : CPU Time = 0.000 seconds
AFLR2 EG : EDGE GRID RE-GENERATION
AFLR2 EG : Nodes, Edges = 545 545
AFLR2 : CPU Time = 0.000 seconds
AFLR2 IG : INITIAL GRID GENERATION
AFLR2 IG : Nodes, Faces = 0 2
AFLR2 IG : Nodes, Faces = 110 222
AFLR2 IG : Nodes, Faces = 220 442
AFLR2 IG : Nodes, Faces = 330 662
AFLR2 IG : Nodes, Faces = 440 882
AFLR2 IG : Nodes, Faces = 517 1036
AFLR2 IG : Nodes, Faces = 545 1092
AFLR2 IG : Nodes, Faces = 549 1092
AFLR2 IG : Nodes, Faces = 545 545
AFLR2 : CPU Time = 0.002 seconds
AFLR2 GG : FIELD GRID GENERATION
AFLR2 GGp: Nodes, Faces = 545 545
AFLR2 GGp: Nodes, Faces = 1083 1621
AFLR2 GGp: Nodes, Faces = 1616 2687
AFLR2 GGp: Nodes, Faces = 2144 3743
AFLR2 GGp: Nodes, Faces = 2661 4777
AFLR2 GGp: Nodes, Faces = 3171 5797
AFLR2 GGp: Nodes, Faces = 3672 6799
AFLR2 GGp: Nodes, Faces = 4158 7771
AFLR2 GGp: Nodes, Faces = 4653 8761
AFLR2 GGp: Nodes, Faces = 5142 9739
AFLR2 GGp: Nodes, Faces = 5608 10671
AFLR2 GGp: Nodes, Faces = 6055 11565
AFLR2 GGp: Nodes, Faces = 6482 12419
AFLR2 GGp: Nodes, Faces = 6880 13215
AFLR2 GGp: Nodes, Faces = 7257 13969
AFLR2 GGp: Nodes, Faces = 7614 14683
AFLR2 GGp: Nodes, Faces = 7947 15349
AFLR2 GGp: Nodes, Faces = 8276 16007
AFLR2 GGp: Nodes, Faces = 8575 16605
AFLR2 GGp: Nodes, Faces = 8869 17193
AFLR2 GGp: Nodes, Faces = 9140 17735
AFLR2 GGp: Nodes, Faces = 9401 18257
AFLR2 GGp: Nodes, Faces = 9654 18763
AFLR2 GGp: Nodes, Faces = 9887 19229
AFLR2 GGp: Nodes, Faces = 10110 19675
AFLR2 GGp: Nodes, Faces = 10315 20085
AFLR2 GGp: Nodes, Faces = 10497 20449
AFLR2 GGp: Nodes, Faces = 10656 20767
AFLR2 GGp: Nodes, Faces = 10791 21037
AFLR2 GGp: Nodes, Faces = 10919 21293
AFLR2 GGp: Nodes, Faces = 11022 21499
AFLR2 GGp: Nodes, Faces = 11092 21639
AFLR2 GGp: Nodes, Faces = 11145 21745
AFLR2 GGp: Nodes, Faces = 11156 21767
AFLR2 : CPU Time = 0.044 seconds
AFLR2 QI : QUALITY IMPROVEMENT
AFLR2 QI : Nodes, Faces = 11156 21767
AFLR2 QI : Nodes, Faces = 11155 819
AFLR2 QI : Nodes, Faces = 11155 10473
AFLR2 QI : Nodes, Faces = 11155 21765
AFLR2 QI : Nodes, Faces = 11154 811
AFLR2 QI : Nodes, Faces = 11154 10476
AFLR2 QI : Nodes, Faces = 11154 21763
AFLR2 QI : Nodes, Faces = 11154 805
AFLR2 QI : Nodes, Faces = 11154 10479
AFLR2 QI : Nodes, Faces = 11154 21763
AFLR2 QI : Nodes, Faces = 11154 911
AFLR2 QI : Nodes, Faces = 11154 10426
AFLR2 QI : Nodes, Faces = 11154 21763
AFLR2 QI : Nodes, Faces = 11153 915
AFLR2 QI : Nodes, Faces = 11153 10423
AFLR2 QI : Nodes, Faces = 11153 917
AFLR2 QI : Nodes, Faces = 11153 10423
AFLR2 : CPU Time = 0.019 seconds
AFLR2 : DONE
EGADS Internal: Face 1, Side 11077 11153 complete [but 18248] (EG_makeConnect)!
EGADS Internal: Face 1, Side 10985 11077 complete [but 18248] (EG_makeConnect)!
EGADS Internal: Face 1, Side 10985 11152 complete [but 18249] (EG_makeConnect)!
EGADS Internal: Face 1, Side 11152 11153 complete [but 19022] (EG_makeConnect)!
Writing AFLR3 file ....
Finished writing AFLR3 file
Number of nodes = 11153
Number of elements = 11885
Number of tris = 917
Number of quad = 10423
EGADS Internal: Face 1, Side 11077 11153 complete [but 18248] (EG_makeConnect)!
EGADS Internal: Face 1, Side 10985 11077 complete [but 18248] (EG_makeConnect)!
EGADS Internal: Face 1, Side 10985 11152 complete [but 18249] (EG_makeConnect)!
EGADS Internal: Face 1, Side 11152 11153 complete [but 19022] (EG_makeConnect)!
EGADS Internal: Face 1, Side 11077 11153 complete [but 18248] (EG_makeConnect)!
EGADS Internal: Face 1, Side 10985 11077 complete [but 18248] (EG_makeConnect)!
EGADS Internal: Face 1, Side 10985 11152 complete [but 18249] (EG_makeConnect)!
EGADS Internal: Face 1, Side 11152 11153 complete [but 19022] (EG_makeConnect)!
Writing Tecplot file ....
Tecplot expects 2D meshes in the x-y plane... attempting to rotate mesh!
Swapping z and y coordinates!
Finished writing Tecplot file
Writing SU2 file ....
SU2 expects 2D meshes in the x-y plane... attempting to rotate mesh!
Swapping z and y coordinates!
Finished writing SU2 file
Getting CFD boundary conditions
Boundary condition name - Airfoil
Boundary condition name - InFlow
Boundary condition name - OutFlow
Boundary condition name - TunnelWall
Done getting CFD boundary conditions
Warning: The su2 cfg file will be overwritten!
Write SU2 configuration file for version "Harrier (8.0.1)"
Running SU2......
-------------------------------------------------------------------------
| ___ _ _ ___ |
| / __| | | |_ ) Release 8.0.0 "Harrier" |
| \__ \ |_| |/ / |
| |___/\___//___| Suite (Computational Fluid Dynamics Code) |
| |
-------------------------------------------------------------------------
| SU2 Project Website: https://su2code.github.io |
| |
| The SU2 Project is maintained by the SU2 Foundation |
| (http://su2foundation.org) |
-------------------------------------------------------------------------
| Copyright 2012-2023, SU2 Contributors |
| |
| SU2 is free software; you can redistribute it and/or |
| modify it under the terms of the GNU Lesser General Public |
| License as published by the Free Software Foundation; either |
| version 2.1 of the License, or (at your option) any later version. |
| |
| SU2 is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| Lesser General Public License for more details. |
| |
| You should have received a copy of the GNU Lesser General Public |
| License along with SU2. If not, see <http://www.gnu.org/licenses/>. |
-------------------------------------------------------------------------
Parsing config file for zone 0
----------------- Physical Case Definition ( Zone 0 ) -------------------
Compressible Euler equations.
Mach number: 0.4.
Angle of attack (AoA): 0 deg, and angle of sideslip (AoS): 0 deg.
No restart solution, use the values at infinity (freestream).
Dimensional simulation.
The reference area is 1 m^2.
The semi-span will be computed using the max y(3D) value.
The reference length is 1 m.
Reference origin for moment evaluation is (0, 0, 0).
Surface(s) where the force coefficients are evaluated: BC_5.
Surface(s) plotted in the output file: BC_5, BC_2.
Input mesh file name: ../aflr2/aflr2_CAPS.su2
--------------- Space Numerical Integration ( Zone 0 ) ------------------
Roe (with entropy fix = 0.001) solver for the flow inviscid terms.
Standard Roe without low-dissipation function.
Second order integration in space, with slope limiter.
Venkatakrishnan slope-limiting method, with constant: 0.05.
The reference element size is: 1.
Gradient for upwind reconstruction: inverse-distance weighted Least-Squares.
Gradient for viscous and source terms: inverse-distance weighted Least-Squares.
--------------- Time Numerical Integration ( Zone 0 ) ------------------
Local time stepping (steady state simulation).
Euler implicit method for the flow equations.
FGMRES is used for solving the linear system.
Using a ILU(0) preconditioning.
Convergence criteria of the linear solver: 1e-06.
Max number of linear iterations: 10.
V Multigrid Cycle, with 2 multigrid levels.
Damping factor for the residual restriction: 0.75.
Damping factor for the correction prolongation: 0.75.
No CFL adaptation.
+-------------------------------------------+
| MG Level| Presmooth|PostSmooth|CorrectSmo|
+-------------------------------------------+
| 0| 1| 0| 0|
| 1| 2| 0| 0|
| 2| 3| 0| 0|
+-------------------------------------------+
Courant-Friedrichs-Lewy number: 10
------------------ Convergence Criteria ( Zone 0 ) ---------------------
Maximum number of solver subiterations: 10.
Begin convergence monitoring at iteration 5.
Residual minimum value: 1e-14.
Cauchy series min. value: 1e-10.
Number of Cauchy elements: 100.
Begin windowed time average at iteration 0.
-------------------- Output Information ( Zone 0 ) ----------------------
File writing frequency:
+------------------------------------+
| File| Frequency|
+------------------------------------+
| RESTART| 250|
| SURFACE_CSV| 250|
| TECPLOT| 250|
| SURFACE_TECPLOT| 250|
+------------------------------------+
Writing the convergence history file every 1 inner iterations.
Writing the screen convergence history every 1 inner iterations.
The tabular file format is CSV (.csv).
Convergence history file name: history.
Forces breakdown file name: forces_breakdown_pyCAPS_su2_aflr2.dat.
Surface file name: surface_flow_pyCAPS_su2_aflr2.
Volume file name: flow_pyCAPS_su2_aflr2.
Restart file name: restart_flow_pyCAPS_su2_aflr2.dat.
------------- Config File Boundary Information ( Zone 0 ) ---------------
+-----------------------------------------------------------------------+
| Marker Type| Marker Name|
+-----------------------------------------------------------------------+
| Euler wall| BC_5|
| | BC_2|
+-----------------------------------------------------------------------+
| Inlet boundary| BC_4|
+-----------------------------------------------------------------------+
| Outlet boundary| BC_3|
+-----------------------------------------------------------------------+
-------------------- Output Preprocessing ( Zone 0 ) --------------------
WARNING: SURFACE_PRESSURE_DROP can only be computed for at least 2 surfaces (outlet, inlet, ...)
Screen output fields: TIME_ITER, OUTER_ITER, INNER_ITER, CUR_TIME, TIME_STEP, WALL_TIME, RMS_DENSITY, RMS_MOMENTUM-X, RMS_MOMENTUM-Y, RMS_ENERGY, EFFICIENCY
History output group(s): ITER, TIME_DOMAIN, WALL_TIME, RMS_RES, AERO_COEFF
Convergence field(s): RMS_DENSITY
Warning: No (valid) fields chosen for time convergence monitoring. Time convergence monitoring inactive.
Volume output fields: COORDINATES, SOLUTION, PRIMITIVE
------------------- Geometry Preprocessing ( Zone 0 ) -------------------
Two dimensional problem.
11153 grid points.
11340 volume elements.
4 surface markers.
98 boundary elements in index 0 (Marker = BC_2).
24 boundary elements in index 1 (Marker = BC_3).
24 boundary elements in index 2 (Marker = BC_4).
399 boundary elements in index 3 (Marker = BC_5).
917 triangles.
10423 quadrilaterals.
Setting point connectivity.
Renumbering points (Reverse Cuthill McKee Ordering).
Recomputing point connectivity.
Setting element connectivity.
Checking the numerical grid orientation.
There has been a re-orientation of 917 TRIANGLE volume elements.
There has been a re-orientation of 10423 QUADRILATERAL volume elements.
There has been a re-orientation of 73 LINE surface elements.
Identifying edges and vertices.
Setting the control volume structure.
Area of the computational grid: 999.878.
Searching for the closest normal neighbors to the surfaces.
Storing a mapping from global to local point index.
Compute the surface curvature.
Max K: 385.665. Mean K: 2.15881. Standard deviation K: 17.7215.
Checking for periodicity.
Computing mesh quality statistics for the dual control volumes.
+--------------------------------------------------------------+
| Mesh Quality Metric| Minimum| Maximum|
+--------------------------------------------------------------+
| Orthogonality Angle (deg.)| 49.3184| 90|
| CV Face Area Aspect Ratio| 1.00035| 33.4982|
| CV Sub-Volume Ratio| 1.00001| 7.89914|
+--------------------------------------------------------------+
Setting the multigrid structure.
+-------------------------------------------+
| MG Level| CVs|Aggl. Rate| CFL|
+-------------------------------------------+
| 0| 11153| 1/1.00| 10|
| 1| 2702| 1/4.13| 7.38309|
| 2| 549| 1/4.92| 4.99198|
+-------------------------------------------+
Finding max control volume width.
Wetted area = 2.06265 m.
Area projection in the x-plane = 0.211192 m, y-plane = 0.997011 m.
Max. coordinate in the x-direction = 1 m, y-direction = 0.102037 m.
Min. coordinate in the x-direction = 0.000323229 m, y-direction = -0.108492 m.
Checking if Euler & Symmetry markers are straight/plane:
Boundary marker BC_5 is NOT a single straight.
Boundary marker BC_2 is NOT a single straight.
Computing wall distances.
-------------------- Solver Preprocessing ( Zone 0 ) --------------------
Inviscid flow: Computing density based on free-stream
temperature and pressure using the ideal gas law.
Force coefficients computed using free-stream values.
-- Models:
+------------------------------------------------------------------------------+
| Viscosity Model| Conductivity Model| Fluid Model|
+------------------------------------------------------------------------------+
| -| -| STANDARD_AIR|
+------------------------------------------------------------------------------+
-- Fluid properties:
+------------------------------------------------------------------------------+
| Name| Dim. value| Ref. value| Unit|Non-dim. value|
+------------------------------------------------------------------------------+
| Gas Constant| 287.058| 1| N.m/kg.K| 287.058|
| Spec. Heat Ratio| -| -| -| 1.4|
+------------------------------------------------------------------------------+
-- Initial and free-stream conditions:
+------------------------------------------------------------------------------+
| Name| Dim. value| Ref. value| Unit|Non-dim. value|
+------------------------------------------------------------------------------+
| Static Pressure| 101325| 1| Pa| 101325|
| Density| 1.22498| 1| kg/m^3| 1.22498|
| Temperature| 288.15| 1| K| 288.15|
| Total Energy| 216054| 1| m^2/s^2| 216054|
| Velocity-X| 136.119| 1| m/s| 136.119|
| Velocity-Y| 0| 1| m/s| 0|
| Velocity Magnitude| 136.119| 1| m/s| 136.119|
+------------------------------------------------------------------------------+
| Mach Number| -| -| -| 0.4|
+------------------------------------------------------------------------------+
Initialize Jacobian structure (Euler). MG level: 0.
Initialize Jacobian structure (Euler). MG level: 1.
Initialize Jacobian structure (Euler). MG level: 2.
------------------- Numerics Preprocessing ( Zone 0 ) -------------------
----------------- Integration Preprocessing ( Zone 0 ) ------------------
------------------- Iteration Preprocessing ( Zone 0 ) ------------------
Euler/Navier-Stokes/RANS fluid iteration.
------------------------------ Begin Solver -----------------------------
Simulation Run using the Single-zone Driver
WARNING: SU2 was not compiled for an AVX-capable architecture. Performance could be better,
see https://su2code.github.io/docs_v7/Build-SU2-Linux-MacOS/#compiler-optimizations
WARNING: SU2 was not compiled for an AVX-capable architecture. Performance could be better,
see https://su2code.github.io/docs_v7/Build-SU2-Linux-MacOS/#compiler-optimizations
WARNING: SU2 was not compiled for an AVX-capable architecture. Performance could be better,
see https://su2code.github.io/docs_v7/Build-SU2-Linux-MacOS/#compiler-optimizations
+----------------------------------------------------------------------------------------------------------------------------------------------+
| Time_Iter| Outer_Iter| Inner_Iter| Cur_Time| Time_Step| Time(sec)| rms[Rho]| rms[RhoU]| rms[RhoV]| rms[RhoE]| CEff|
+----------------------------------------------------------------------------------------------------------------------------------------------+
| 0| 0| 0| 0.0000e+00| 0.0000e+00| 1.1321e-01| 0.071067| 2.739763| 1.616077| 5.599701| 0.055267|
| 0| 0| 1| 0.0000e+00| 0.0000e+00| 1.1071e-01| -0.447576| 2.193837| 1.571349| 5.070382| 0.046028|
| 0| 0| 2| 0.0000e+00| 0.0000e+00| 1.0938e-01| -0.561159| 2.074597| 1.490746| 4.953698| 0.033910|
| 0| 0| 3| 0.0000e+00| 0.0000e+00| 1.0884e-01| -0.723326| 1.921155| 1.390756| 4.790278| 0.049695|
| 0| 0| 4| 0.0000e+00| 0.0000e+00| 1.0872e-01| -0.876572| 1.825653| 1.275093| 4.637161| 0.133976|
| 0| 0| 5| 0.0000e+00| 0.0000e+00| 1.0836e-01| -1.029177| 1.759196| 1.156078| 4.482282| 0.368542|
| 0| 0| 6| 0.0000e+00| 0.0000e+00| 1.0798e-01| -1.215334| 1.704909| 1.114966| 4.286060| 0.974759|
| 0| 0| 7| 0.0000e+00| 0.0000e+00| 1.0772e-01| -1.329970| 1.644937| 1.145030| 4.116982| 2.716332|
| 0| 0| 8| 0.0000e+00| 0.0000e+00| 1.0751e-01| -1.270672| 1.570739| 1.155400| 4.139480| 16.569216|
| 0| 0| 9| 0.0000e+00| 0.0000e+00| 1.0746e-01| -1.221243| 1.499646| 1.130319| 4.189559| -6.277653|
----------------------------- Solver Exit -------------------------------
Maximum number of iterations reached (ITER = 10) before convergence.
+-----------------------------------------------------------------------+
| Convergence Field | Value | Criterion | Converged |
+-----------------------------------------------------------------------+
| rms[Rho]| -1.22124| < -14| No|
+-----------------------------------------------------------------------+
-------------------------------------------------------------------------
+-----------------------------------------------------------------------+
| File Writing Summary | Filename |
+-----------------------------------------------------------------------+
|SU2 binary restart |restart_flow_pyCAPS_su2_aflr2.dat |
Writing the forces breakdown file (forces_breakdown_pyCAPS_su2_aflr2.dat).
|CSV file |surface_flow_pyCAPS_su2_aflr2.csv |
Writing the forces breakdown file (forces_breakdown_pyCAPS_su2_aflr2.dat).
|Tecplot binary |flow_pyCAPS_su2_aflr2.szplt |
Writing the forces breakdown file (forces_breakdown_pyCAPS_su2_aflr2.dat).
|Tecplot binary surface |surface_flow_pyCAPS_su2_aflr2.szplt|
Error in tecFileWriterClose: Not all node map values for zone 1 have been written.
Currently need 994 more values.0: Error finishing Tecplot file output.
Writing the forces breakdown file (forces_breakdown_pyCAPS_su2_aflr2.dat).
+-----------------------------------------------------------------------+
--------------------------- Finalizing Solver ---------------------------
Deleted CNumerics container.
Deleted CIntegration container.
Deleted CSolver container.
Deleted CIteration container.
Deleted CInterface container.
Deleted CGeometry container.
Deleted CFreeFormDefBox class.
Deleted CSurfaceMovement class.
Deleted CVolumetricMovement class.
Deleted CConfig container.
Deleted nInst container.
Deleted COutput class.
-------------------------------------------------------------------------
------------------------- Exit Success (SU2_CFD) ------------------------
Total Force - Pressure + Viscous
Cl = 0.072253 Cd = -0.01151
Cmz = 0.070975
Cx = -0.01151 Cy = 0.072253
Pressure Contribution
Cl_p = 0.072253 Cd_p = -0.01151
Cmz_p = 0.070975
Cx_p = -0.01151 Cy_p = 0.072253
Viscous Contribution
Cl_v = 0.0 Cd_v = 0.0
Cmz_v = 0.0
Cx_v = 0.0 Cy_v = 0.0
real 0m4.075s
user 0m2.850s
sys 0m1.031s
+ status=0
+ set +x
=================================================
CAPS verification (using pyCAPS) case su2_and_AFLR2_PyTest.py passed (as expected)
=================================================
./execute_PyTestRegression.sh: line 198: ulimit: stack size: cannot modify limit: Operation not permitted
=================================================
+ echo 'cart3d_PyTest.py test;'
+ tee -a /Users/jenkins/workspace/ESP_Beta/7.7/DARWIN64/EngSketchPad/CAPSexamples/regressionTest/pyCAPSlog.txt
cart3d_PyTest.py test;
+ python -u cart3d_PyTest.py -outLevel=0
+ tee -a /Users/jenkins/workspace/ESP_Beta/7.7/DARWIN64/EngSketchPad/CAPSexamples/regressionTest/pyCAPSlog.txt
Loading AIM
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = Wing, index = 1
Body size = 3.796888
Tessellating body 1 with MaxEdge = 0.094922 Sag = 0.003797 Angle = 15.000000
Executing: autoInputs -r 30.000000 -nDiv 6 -maxR 9 > autoInputs.out
Executing: ./aero.csh > aero.out
C_A 0.023693377
C_Y -0.0012129282
C_N 0.065395002
C_D 0.025961197
C_S -0.0012129282
C_L 0.064528278
C_l 0.0510971
C_m 0.000248187
C_n -0.017525
C_M_x 0.0504544
C_M_y 0.000248187
C_M_z -0.0192976
real 0m45.728s
user 0m35.748s
sys 0m1.182s
+ status=0
+ set +x
=================================================
CAPS verification (using pyCAPS) case cart3d_PyTest.py passed (as expected)
=================================================
=================================================
+ echo 'astros_ThreeBar_PyTest.py test;'
+ tee -a /Users/jenkins/workspace/ESP_Beta/7.7/DARWIN64/EngSketchPad/CAPSexamples/regressionTest/pyCAPSlog.txt
astros_ThreeBar_PyTest.py test;
+ python -u astros_ThreeBar_PyTest.py -outLevel=0
+ tee -a /Users/jenkins/workspace/ESP_Beta/7.7/DARWIN64/EngSketchPad/CAPSexamples/regressionTest/pyCAPSlog.txt
WARNING:: WireBody is non-manifold
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = boundary, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = force, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsReference attributes ................
Number of unique capsReference attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 3
Name = bar1, index = 1
Name = bar2, index = 2
Name = bar3, index = 3
capsIgnore attribute found for edge - 3!!
capsIgnore attribute found. Removing unneeded nodes and elements from mesh!
Removing unused nodes...
Removed 0 (out of 4) unused nodes!
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 4
Number of elements = 3
Elemental Nodes = 0
Elemental Rods = 3
Elemental Tria3 = 0
Elemental Quad4 = 0
Aero_Reference value is NULL - No aero reference parameters set
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 3
Property name - bar1
Property name - bar2
Property name - bar3
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - BoundaryCondition
No "constraintType" specified for Constraint tuple BoundaryCondition, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedForce
Done getting FEA loads
Optimization Control tuple is NULL - Default optimization control is used
Getting FEA optimization control.......
Done getting FEA Optimization Control
Design_Variable tuple is NULL - No design variables applied
Design_Constraint tuple is NULL - No design constraints applied
Getting FEA analyses.......
Number of analyses - 1
Analysis name - SingleLoadCase
Done getting FEA analyses
Writing Astros grid and connectivity file (in free field format) ....
Finished writing Astros grid file
Writing subElement types (if any) - appending mesh file
Writing Astros instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint cards--each subcase individually
Writing load cards
Writing material cards
Writing property cards
real 0m1.200s
user 0m0.728s
sys 0m0.385s
+ status=0
+ set +x
=================================================
CAPS verification (using pyCAPS) case astros_ThreeBar_PyTest.py passed (as expected)
=================================================
=================================================
+ echo 'astros_Flutter_15degree.py test;'
+ tee -a /Users/jenkins/workspace/ESP_Beta/7.7/DARWIN64/EngSketchPad/CAPSexamples/regressionTest/pyCAPSlog.txt
astros_Flutter_15degree.py test;
+ python -u astros_Flutter_15degree.py -outLevel=0
+ tee -a /Users/jenkins/workspace/ESP_Beta/7.7/DARWIN64/EngSketchPad/CAPSexamples/regressionTest/pyCAPSlog.txt
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = Root_Point, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = Root_Point, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 1
Name = WingSurface, index = 1
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 1
Name = Root, index = 1
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsReference attributes ................
Number of unique capsReference attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 4
Name = Edge, index = 1
Name = Body, index = 2
Name = Root, index = 3
Name = Wing, index = 4
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 96
Number of elements = 77
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 77
Setting FEA Data
Mesh for body = 1
Number of nodal coordinates = 1
Number of elements = 1
Elemental Nodes = 1
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 0
Combining multiple FEA meshes!
Combined Number of nodal coordinates = 97
Combined Number of elements = 78
Combined Elemental Nodes = 1
Combined Elemental Rods = 0
Combined Elemental Tria3 = 0
Combined Elemental Quad4 = 77
Getting vortex lattice surface data
VLM surface name - WingSurface
Done getting vortex lattice surface data
Getting FEA vortex lattice mesh
Surface 1: Number of points found for aero-spline = 96
(Re-)Combining all aerodynamic surfaces into a 'Wing', 'Canard', and/or 'Fin' single surfaces !
Aero_Reference value is NULL - No aero reference parameters set
Getting FEA materials.......
Number of materials - 1
Material name - aluminum
No "materialType" specified for Material tuple aluminum, defaulting to "Isotropic"
Done getting FEA materials
Getting FEA properties.......
Number of properties - 2
Property name - Body
Property name - Edge
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - PointConstraint
No "constraintType" specified for Constraint tuple PointConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Getting FEA connections.......
Number of connection tuples - 1
Connection name - Root
No "groupName" specified for Connection tuple Root!
Looking for automatic connections from the use of capsConnectLink for Root
8 automatic connections were made for capsConnect Root (node id 97)
Done getting FEA connections
Load tuple is NULL - No loads applied
Optimization Control tuple is NULL - Default optimization control is used
Getting FEA optimization control.......
Done getting FEA Optimization Control
Design_Variable tuple is NULL - No design variables applied
Design_Constraint tuple is NULL - No design constraints applied
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Flutter
Done getting FEA analyses
Writing Astros grid and connectivity file (in free field format) ....
Finished writing Astros grid file
Writing subElement types (if any) - appending mesh file
Writing connection cards - appending mesh file
Writing Astros instruction file....
Writing aero card
Writing analysis cards
Writing constraint cards--each subcase individually
Writing material cards
Writing property cards
Writing unsteady aeroelastic cards
Note: The following floating-point exceptions are signalling: IEEE_UNDERFLOW_FLAG IEEE_DENORMAL
real 0m2.017s
user 0m1.098s
sys 0m0.561s
+ status=0
+ set +x
=================================================
CAPS verification (using pyCAPS) case astros_Flutter_15degree.py passed (as expected)
=================================================
=================================================
+ echo 'masstran_PyTest.py test;'
+ tee -a /Users/jenkins/workspace/ESP_Beta/7.7/DARWIN64/EngSketchPad/CAPSexamples/regressionTest/pyCAPSlog.txt
masstran_PyTest.py test;
+ python -u masstran_PyTest.py -outLevel=0
+ tee -a /Users/jenkins/workspace/ESP_Beta/7.7/DARWIN64/EngSketchPad/CAPSexamples/regressionTest/pyCAPSlog.txt
Getting results mass properties.....
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = Ribs_and_Spars, index = 1
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 0
Getting surface mesh for body 1 (of 1)
Body 1 (of 1)
Number of nodes = 1159
Number of elements = 798
Number of triangle elements = 0
Number of quadrilateral elements = 798
----------------------------
Total number of nodes = 1159
Total number of elements = 798
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = Rib_Constraint, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 0
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = Ribs_and_Spars, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 1159
Number of elements = 798
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 798
Getting FEA materials.......
Number of materials - 2
Material name - Madeupium
Material name - Unobtainium
No "materialType" specified for Material tuple Unobtainium, defaulting to "Isotropic"
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - Ribs_and_Spars
No "material" specified for Property tuple Ribs_and_Spars, defaulting to an index of 1
Done getting FEA properties
Updating mesh element types based on properties input
Area 3.428666259747
Mass 5383.006027803
Centroid [1.222256036874, 0.1634981473778, -4.234377369776e-11]
CG [1.222256036874, 0.1634981473778, -4.234490614246e-11]
Ixx 22133.97306033
Iyy 23448.30046709
Izz 1389.213122582
Ixy 164.2055275657
Ixz -7.454850140458e-06
Iyz 1.707682988152e-06
I [22133.97306033, 23448.30046709, 1389.213122582, 164.2055275657, -7.454850140458e-06, 1.707682988152e-06]
II [[22133.97306033, -164.2055275657, 7.454850140458e-06], [-164.2055275657, 23448.30046709, -1.707682988152e-06], [7.454850140458e-06, -1.707682988152e-06, 1389.213122582]]
real 0m7.412s
user 0m11.727s
sys 0m6.675s
+ status=0
+ set +x
=================================================
CAPS verification (using pyCAPS) case masstran_PyTest.py passed (as expected)
=================================================
=================================================
+ echo 'hsm_SingleLoadCase_PyTest.py test;'
+ tee -a /Users/jenkins/workspace/ESP_Beta/7.7/DARWIN64/EngSketchPad/CAPSexamples/regressionTest/pyCAPSlog.txt
hsm_SingleLoadCase_PyTest.py test;
+ python -u hsm_SingleLoadCase_PyTest.py -outLevel=0
+ tee -a /Users/jenkins/workspace/ESP_Beta/7.7/DARWIN64/EngSketchPad/CAPSexamples/regressionTest/pyCAPSlog.txt
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Creating HSM BEM
Getting quads for BEM!
Number of nodal coordinates = 81
Number of elements = 96
Elemental Tria3 = 0
Elemental Quad4 = 64
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Max Adjacency set to = 9
MaxDim = 32, numBCEdge = 0, numBCNode = 32, numJoint = 0
NEED TO ADD MORE CODE TO hsm_setGlobalParameter
NEED TO ADD MORE CODE TO hsm_setNodeBCParameter
NumBCNode = 32
->HSMSOL
Matrix Non-zero Entries = 5741
Converging HSM equation system ...
iter dr dd dp rlx max
1 0.130E-01 0.165E+00 0.153E-04 1.000 ddy @ ( 0.25 0.06 0.00)
1* 0.260E-03 0.000E+00 0.000E+00 1.000 drz @ ( 0.25 0.12 0.00)
1* 0.240E-05 0.000E+00 0.000E+00 1.000 drz @ ( 0.25 0.09 0.00)
2 0.379E-02 0.505E-01 0.750E-04 1.000 ddy @ ( 0.25 0.19 0.00)
2* 0.420E-04 0.000E+00 0.000E+00 1.000 drz @ ( 0.25 0.12 0.00)
3 0.168E-02 0.225E-01 0.208E-04 1.000 ddy @ ( 0.25 0.06 0.00)
4 0.325E-03 0.427E-02 0.250E-05 1.000 ddy @ ( 0.25 0.19 0.00)
5 0.794E-05 0.112E-03 0.170E-06 1.000 ddy @ ( 0.25 0.19 0.00)
6 0.387E-08 0.598E-07 0.197E-09 1.000 ddy @ ( 0.25 0.06 0.00)
7 0.848E-15 0.147E-13 0.924E-15 1.000 ddy @ ( 0.25 0.19 0.00)
Converging n vectors ...
it = 1 dn = 0.788E-01 rlx = 1.000 ( 59 )
it = 2 dn = 0.566E-16 rlx = 1.000 ( 35 )
Converging e1,e2 vectors ...
it = 1 de = 0.691E-03 rlx = 1.000 ( 45 )
it = 2 de = 0.404E-04 rlx = 1.000 ( 9 )
it = 3 de = 0.142E-07 rlx = 1.000 ( 46 )
it = 4 de = 0.521E-11 rlx = 1.000 ( 62 )
Calculating strains, stress resultants ...
Writing HSM solution to Tecplot File - HSMSingleLoadPlate.dat
real 0m2.924s
user 0m0.918s
sys 0m0.153s
+ status=0
+ set +x
=================================================
CAPS verification (using pyCAPS) case hsm_SingleLoadCase_PyTest.py passed (as expected)
=================================================
=================================================
+ echo '../corsairlite/qp.py test;'
+ tee -a /Users/jenkins/workspace/ESP_Beta/7.7/DARWIN64/EngSketchPad/CAPSexamples/regressionTest/pyCAPSlog.txt
../corsairlite/qp.py test;
+ python -u ../corsairlite/qp.py -outLevel=0
+ tee -a /Users/jenkins/workspace/ESP_Beta/7.7/DARWIN64/EngSketchPad/CAPSexamples/regressionTest/pyCAPSlog.txt
Objective
---------
-21.56250 dimensionless
Variables
---------
x : 1.62500 [-] The X variable
y : 1.37500 [-] The Y variable
Constants
---------
c : 3 [-] A constant
c2 : 2 [-] A constant
Sensitivities
-------------
c : + 0.46957 A constant
c2 : - 0.22338 A constant
Solve Report
------------
Solve Method : Quadratic Program
Classification : Convex
Solver : cvxopt
real 1m33.063s
user 0m2.583s
sys 0m0.373s
+ status=0
+ set +x
=================================================
CAPS verification (using pyCAPS) case ../corsairlite/qp.py passed (as expected)
=================================================
*************************************************
*************************************************
=================================================
Did not run examples for:
abaqus
awave
Mystran
=================================================
All tests pass!
=================================================
=================================================
+ cd /Users/jenkins/workspace/ESP_Beta/7.7/DARWIN64
+ mkdir -p /Users/jenkins/workspace/ESP_Beta/7.7/DARWIN64/test/plugs
+ cd /Users/jenkins/workspace/ESP_Beta/7.7/DARWIN64/test/plugs
+ find /Users/jenkins/workspace/ESP_Beta/7.7/DARWIN64/EngSketchPad/data/Plugs -name 'plugs0*.csm'
+ sort -f
+ awk '{ n=split($0, a, ";"); for(i=1; i<=n; i+=2) print a[i] }' /Users/jenkins/workspace/ESP_Beta/7.7/DARWIN64/JenkinsESP/data/plugs/plugsFailure.txt
+ cp /Users/jenkins/workspace/ESP_Beta/7.7/DARWIN64/JenkinsESP/data/plugs/plugsIgnore.txt .
+ set +x
Testing CSM files:
data/Plugs/plugs0a.csm
data/Plugs/plugs0b.csm
data/Plugs/plugs0c.csm
data/Plugs/plugs0d.csm
total 50432
-rw-r--r-- 1 jenkins staff 1.2M Jul 21 20:35 ASTRO.D01
-rw-r--r-- 1 jenkins staff 277K Jul 21 20:35 ASTRO.IDX
-rwxr-xr-x 1 jenkins staff 145K Jul 21 20:36 ESPxddm
-rwxr-xr-x 1 jenkins staff 226K Jul 21 20:35 Slugs
-rwxr-xr-x 1 jenkins staff 101K Jul 21 20:35 TestFit
-rwxr-xr-x 1 jenkins staff 1.8M Jul 21 20:35 avl
-rwxr-xr-x 1 jenkins staff 34K Jul 21 20:36 cart3dTest
-rwxr-xr-x 1 jenkins staff 34K Jul 21 20:33 egads2cart
-rwxr-xr-x 1 jenkins staff 85K Jul 21 20:36 egads2cgt
-rwxr-xr-x 1 jenkins staff 50K Jul 21 20:36 friction
-rwxr-xr-x 1 jenkins staff 8.9M Jul 21 20:35 mastros.exe
-rwxr-xr-x 1 jenkins staff 2.2M Jul 21 20:35 mses
-rwxr-xr-x 1 jenkins staff 2.5M Jul 21 20:35 mset
-rwxr-xr-x 1 jenkins staff 34K Jul 21 20:35 phaseUtil
-rw-r--r-- 1 jenkins staff 1.6K Jul 21 20:39 pod.egads
-rw-r--r-- 1 jenkins staff 0B Jul 21 20:39 port7681.jrnl
-rwxr-xr-x 1 jenkins staff 1.2M Jul 21 20:35 pplot
-rwxr-xr-x 1 jenkins staff 1.2M Jul 21 20:35 pxplot
-rwxr-xr-x 1 jenkins staff 84K Jul 21 20:34 sensCSM
-rwxr-xr-x 1 jenkins staff 222K Jul 21 20:34 serveCSM
-rwxr-xr-x 1 jenkins staff 190K Jul 21 20:34 serveESP
-rwxr-xr-x 1 jenkins staff 51K Jul 21 20:33 vCurvature
-rwxr-xr-x 1 jenkins staff 51K Jul 21 20:33 vGeom
-rwxr-xr-x 1 jenkins staff 36K Jul 21 20:33 vTess
-rwxr-xr-x 1 jenkins staff 2.0M Jul 21 20:33 vTesstatic
-rw-r--r-- 1 jenkins staff 196K Jul 21 20:39 wingMultiModel.bdf
-rwxr-xr-x 1 jenkins staff 1.8M Jul 21 20:35 xfoil
( 1 / 4 )
data/Plugs/plugs0a.csm;
++ /Users/jenkins/workspace/ESP_Beta/7.7/DARWIN64/EngSketchPad/bin/serveCSM /Users/jenkins/workspace/ESP_Beta/7.7/DARWIN64/EngSketchPad/data/Plugs/plugs0a.csm -outLevel 0 -plugs 25 -plot /Users/jenkins/workspace/ESP_Beta/7.7/DARWIN64/EngSketchPad/data/Plugs/plugs0.cloud -batch -verify -jrnl /Users/jenkins/workspace/ESP_Beta/7.7/DARWIN64/EngSketchPad/data/Plugs/buildFinal.jrnl
WARNING:: cannot open "/Users/jenkins/workspace/ESP_Beta/7.7/DARWIN64/EngSketchPad/data/Plugs/verify_7.7.0/plugs0a.vfy", so verification is being skipped
===================================
PLUGS with 4562 points in the cloud
===================================
PLUGS phase1: match bounding boxes
PLUGS phase2: match cloud points
Starting pass 1 (of 25) of phase2
Pass 1 converged, dmax= 5.416e-07, rmsbest= 6.132e-04, reclass= 4562, unclass= 0
Starting pass 2 (of 25) of phase2
Pass 2 converged, dmax= 5.366e-07, rmsbest= 7.097e-04, reclass= 2, unclass= 0
Starting pass 3 (of 25) of phase2
Phase2 passes converged because points are classified same as previous pass
==> Opening input journal file "/Users/jenkins/workspace/ESP_Beta/7.7/DARWIN64/EngSketchPad/data/Plugs/buildFinal.jrnl"
==> Closing input journal file
==> serveCSM completed successfully with no verification data
real 0m15.158s
user 0m12.944s
sys 0m0.707s
++ set +x
data/Plugs/plugs0a passed (as expected)
--------------------------------------------------------------------------------------------------
( 2 / 4 )
data/Plugs/plugs0b.csm;
++ /Users/jenkins/workspace/ESP_Beta/7.7/DARWIN64/EngSketchPad/bin/serveCSM /Users/jenkins/workspace/ESP_Beta/7.7/DARWIN64/EngSketchPad/data/Plugs/plugs0b.csm -outLevel 0 -plugs 25 -plot /Users/jenkins/workspace/ESP_Beta/7.7/DARWIN64/EngSketchPad/data/Plugs/plugs0.cloud -batch -verify -jrnl /Users/jenkins/workspace/ESP_Beta/7.7/DARWIN64/EngSketchPad/data/Plugs/buildFinal.jrnl
WARNING:: cannot open "/Users/jenkins/workspace/ESP_Beta/7.7/DARWIN64/EngSketchPad/data/Plugs/verify_7.7.0/plugs0b.vfy", so verification is being skipped
===================================
PLUGS with 4562 points in the cloud
===================================
PLUGS phase1: match bounding boxes
PLUGS phase2: match cloud points
Starting pass 1 (of 25) of phase2
Pass 1 converged, dmax= 3.039e-07, rmsbest= 4.036e-02, reclass= 4562, unclass= 0
Starting pass 2 (of 25) of phase2
Pass 2 converged, dmax= 2.814e-07, rmsbest= 1.924e-03, reclass= 1033, unclass= 0
Starting pass 3 (of 25) of phase2
Pass 3 converged, dmax= 4.494e-07, rmsbest= 5.920e-04, reclass= 473, unclass= 0
Starting pass 4 (of 25) of phase2
Pass 4 converged, dmax= 5.366e-07, rmsbest= 7.097e-04, reclass= 17, unclass= 0
Starting pass 5 (of 25) of phase2
Phase2 passes converged because points are classified same as previous pass
==> Opening input journal file "/Users/jenkins/workspace/ESP_Beta/7.7/DARWIN64/EngSketchPad/data/Plugs/buildFinal.jrnl"
==> Closing input journal file
==> serveCSM completed successfully with no verification data
real 0m12.986s
user 0m14.862s
sys 0m0.178s
++ set +x
data/Plugs/plugs0b passed (as expected)
--------------------------------------------------------------------------------------------------
( 3 / 4 )
data/Plugs/plugs0c.csm;
++ /Users/jenkins/workspace/ESP_Beta/7.7/DARWIN64/EngSketchPad/bin/serveCSM /Users/jenkins/workspace/ESP_Beta/7.7/DARWIN64/EngSketchPad/data/Plugs/plugs0c.csm -outLevel 0 -plugs 25 -plot /Users/jenkins/workspace/ESP_Beta/7.7/DARWIN64/EngSketchPad/data/Plugs/plugs0.cloud -batch -verify -jrnl /Users/jenkins/workspace/ESP_Beta/7.7/DARWIN64/EngSketchPad/data/Plugs/buildFinal.jrnl
WARNING:: cannot open "/Users/jenkins/workspace/ESP_Beta/7.7/DARWIN64/EngSketchPad/data/Plugs/verify_7.7.0/plugs0c.vfy", so verification is being skipped
===================================
PLUGS with 4562 points in the cloud
===================================
PLUGS phase1: match bounding boxes
PLUGS phase2: match cloud points
Starting pass 1 (of 25) of phase2
Pass 1 ran out of iterations, rmsbest= 1.677e-01, reclass= 4562, unclass= 554
Starting pass 2 (of 25) of phase2
Pass 2 converged, dmax= 4.016e-07, rmsbest= 6.330e-02, reclass= 1676, unclass= 0
Starting pass 3 (of 25) of phase2
Pass 3 converged, dmax= 1.881e-07, rmsbest= 8.736e-03, reclass= 791, unclass= 0
Starting pass 4 (of 25) of phase2
Pass 4 converged, dmax= 3.081e-07, rmsbest= 1.037e-03, reclass= 428, unclass= 0
Starting pass 5 (of 25) of phase2
Pass 5 converged, dmax= 5.816e-07, rmsbest= 7.097e-04, reclass= 109, unclass= 0
Starting pass 6 (of 25) of phase2
Phase2 passes converged because points are classified same as previous pass
==> Opening input journal file "/Users/jenkins/workspace/ESP_Beta/7.7/DARWIN64/EngSketchPad/data/Plugs/buildFinal.jrnl"
==> Closing input journal file
==> serveCSM completed successfully with no verification data
real 0m32.930s
user 0m45.093s
sys 0m0.298s
++ set +x
data/Plugs/plugs0c passed (as expected)
--------------------------------------------------------------------------------------------------
( 4 / 4 )
data/Plugs/plugs0d.csm;
++ /Users/jenkins/workspace/ESP_Beta/7.7/DARWIN64/EngSketchPad/bin/serveCSM /Users/jenkins/workspace/ESP_Beta/7.7/DARWIN64/EngSketchPad/data/Plugs/plugs0d.csm -outLevel 0 -plugs 25 -plot /Users/jenkins/workspace/ESP_Beta/7.7/DARWIN64/EngSketchPad/data/Plugs/plugs0.cloud -batch -verify -jrnl /Users/jenkins/workspace/ESP_Beta/7.7/DARWIN64/EngSketchPad/data/Plugs/buildFinal.jrnl
WARNING:: cannot open "/Users/jenkins/workspace/ESP_Beta/7.7/DARWIN64/EngSketchPad/data/Plugs/verify_7.7.0/plugs0d.vfy", so verification is being skipped
===================================
PLUGS with 4562 points in the cloud
===================================
PLUGS phase1: match bounding boxes
PLUGS phase2: match cloud points
Starting pass 1 (of 25) of phase2
Pass 1 ran out of iterations, rmsbest= 1.677e-01, reclass= 4562, unclass= 554
Starting pass 2 (of 25) of phase2
Pass 2 converged, dmax= 4.016e-07, rmsbest= 6.330e-02, reclass= 1676, unclass= 0
Starting pass 3 (of 25) of phase2
Pass 3 converged, dmax= 1.881e-07, rmsbest= 8.736e-03, reclass= 791, unclass= 0
Starting pass 4 (of 25) of phase2
Pass 4 converged, dmax= 3.081e-07, rmsbest= 1.037e-03, reclass= 428, unclass= 0
Starting pass 5 (of 25) of phase2
Pass 5 converged, dmax= 5.816e-07, rmsbest= 7.097e-04, reclass= 109, unclass= 0
Starting pass 6 (of 25) of phase2
Phase2 passes converged because points are classified same as previous pass
==> Opening input journal file "/Users/jenkins/workspace/ESP_Beta/7.7/DARWIN64/EngSketchPad/data/Plugs/buildFinal.jrnl"
==> Closing input journal file
==> serveCSM completed successfully with no verification data
real 0m36.564s
user 0m45.561s
sys 0m0.279s
++ set +x
data/Plugs/plugs0d passed (as expected)
--------------------------------------------------------------------------------------------------
[Execution node] check if [macys] is in [[viggen]]
Run condition [Execution node ] preventing perform for step [Execute shell]
[Execution node] check if [macys] is in [[windows10x64]]
Run condition [Execution node ] preventing perform for step [Execute Windows batch command]
[GNU C Compiler (gcc)] Parsing console log (workspace: '/Users/jenkins/workspace/ESP_Beta/7.7/DARWIN64')
[GNU C Compiler (gcc)] Successfully parsed console log
[GNU C Compiler (gcc)] -> found 0 issues (skipped 0 duplicates)
[GNU C Compiler (gcc)] Skipping post processing
[GNU C Compiler (gcc)] No filter has been set, publishing all 0 issues
[GNU C Compiler (gcc)] Repository miner is not configured, skipping repository mining
[Clang] Parsing console log (workspace: '/Users/jenkins/workspace/ESP_Beta/7.7/DARWIN64')
[Clang] -> found 0 issues (skipped 0 duplicates)
[Clang] Parsing console log (workspace: '/Users/jenkins/workspace/ESP_Beta/7.7/DARWIN64')
[Clang] Skipping post processing
[Clang] No filter has been set, publishing all 0 issues
[Clang] Repository miner is not configured, skipping repository mining
[Static Analysis] Successfully parsed console log
[Static Analysis] -> found 0 issues (skipped 0 duplicates)
[Static Analysis] Parsing console log (workspace: '/Users/jenkins/workspace/ESP_Beta/7.7/DARWIN64')
[Static Analysis] Successfully parsed console log
[Static Analysis] -> found 0 issues (skipped 0 duplicates)
[Static Analysis] Skipping post processing
[Static Analysis] No filter has been set, publishing all 0 issues
[Static Analysis] Repository miner is not configured, skipping repository mining
[Static Analysis] Parsing console log (workspace: '/Users/jenkins/workspace/ESP_Beta/7.7/DARWIN64')
[Static Analysis] Skipping post processing
[Static Analysis] No filter has been set, publishing all 0 issues
[Static Analysis] Repository miner is not configured, skipping repository mining
[Static Analysis] Reference build recorder is not configured
[Static Analysis] No valid reference build found
[Static Analysis] All reported issues will be considered outstanding
[Static Analysis] No quality gates have been set - skipping
[Static Analysis] Health report is disabled - skipping
[Static Analysis] Created analysis result for 0 issues (found 0 new issues, fixed 0 issues)
[Static Analysis] Attaching ResultAction with ID 'analysis' to build 'ESP_Beta/CASREV=7.7,ESP_ARCH=DARWIN64,buildnode=macys #738'.
[Checks API] No suitable checks publisher found.
[WS-CLEANUP] Deleting project workspace...
[WS-CLEANUP] Deferred wipeout is used...
[WS-CLEANUP] done
Finished: SUCCESS