Changes

Summary

1. convert backslashes to forward slashes in filenames in udpVsp3 because anglescipt expects forward slashes
2. properly rename vsp3 verification test cases
3. ATTRRECYCLE forces UDPRIM to not be recycled; fix printing of SELECT with attrValu a number; update udpVsp3 to automatically run vsp; add data/vsp3 test cases; add propInteg*a test cases; use _plugsIgnore on Faces that should be ignored during cloud point reclassifications in Plugs; add udpWarp; add ablate0* test cases
4. modify ocsmPrintBrep to show list Edges as degenerate rather than skipping them; add SPECIAL printCPs command to print the control points associated with all Nurbs in the Body on the top of the stack; add first version of udpVsp3
5. first version of udpVspComp
6. fix bug that did not retain Edge attributes during an ELEVATE operation
7. add mincp argument to udpNuscale and convertToBSplines functions; add ablate* test cases, including using Plugs; extend Plugs to be able to use DIMENSIONed DESPMTRs; fix bug in velocityOfEdge for Edges with dots that have changing tranges
8. temporarily remove vspFuse* test cases
9. analytic sensitivities for sketches; update .gsen and .tsen files; move sketch13* test cases to designY*
10. start implementing analytic sensitivities for Sketches; add sketch13* test cases
11. initial, very early, preliminary version of udpVspFuse and associated test cases
12. fix error in serveESP.mak in previous commit
13. fix error in serveESP.mak; fix debug code error for windoze
14. change the SUBTRACTion of two co-planar SheetBodys such that if the Loop associated with the second Body does not cut a clean hole in the first Body, revert to the (default) scribing behavior for SheetBodys, that is scribe the first Body with the Edges from the second Body; update the documentation for SUBTRACT; add scribe11* test cases; fix occasional bug associated with analytical sensitivities when DUMPing a .sens file from with .csm script
15. add support for BLENDs with .C1side Attributes; add blend23* test cases; change serveESP.mak so that it does not error if PYTHONINC is not set
16. uprev to v1.24 (ESP.html, ESP-localhost.html, ESP-help.html, OpenCSM.h, ocsm.rc)
17. added ability to double-click on python error to open pyscript editor at the correct line
18. update various testing scripts
19. add udfLinalg and linalg1 test case; add sketch12* test cases
20. another update to Makefile.LINUX64
21. update Makefile.LINUX64 to execute full test suite
22. fix warnings in previous commit
23. add ocsmTraceAttrs, ocsmTraceStors, ocsmGetFiletree, and ocsmShowTblOfContents; add ability to trace Attributes, Storges, the FileTree, and the provided representations in the .csm editor; limit number of files in File menu in ESP so that it does not overflow the display; add SPECIAL provides statement to work with ocsmShowTblOfContents
24. fix bug that did not properly decrement the pattern counter for ENDIF statements after a PATBREAK was executed; fix bug that returned error after SELECTing a degenerate Edge
25. take shortcut when creating tessellation sensitivities for Faces that do not have Edges that are the result of Boolean operations; update .tsen files for both 7.6.0 and 7.7.0
26. fix typo in text string in serveESP
27. fix warning in previous commit
28. fix bug that copied Csystems into a UDPRIM; add udfMechanism and mechanism* test cases
29. add udfDeform to change BSpline control points associated with Faces (and Edges and Nodes) in a Body; add deform* test cases; modify some verification data to account for differences between 7.6.0 and 7.7.0 on all operating systems
30. remove more clang warnings
31. remove clang warnings
32. remove GLOVES from ESP menu (for now)
33. update data/capsExamples/verify_7.7.0 files; use EG_copyObject since EGADS now allows the copying of PCurves; fix typos in testScript.txt; updates to avoid warnings in latest version of clang
34. allow cases with Edge-only tessellations to work; add edgeGrid* test cases; update 7.7.0 verification data for imprint5 (should fail); add PLOT_DISPLACE to plot displaced Edges based upon tessellation sensitivities
35. fix recently-added bug associated with FD tessellation sensitivities for NodeBodys
36. create verification data for OCC 7.7.0; make sure EVALUATE returns dot=0
37. compute tessellatiopn sensitivities correctly for a NodeBody; set and report sensitivity range properly when looking at only one component of tessellation sensitivities; add -forceFDs command line option to force finite difference sensitivities in serveESP
38. protect against stanalyzer bug
39. further improvements to flends; add flend10* test cases; fix memory leak when udfOffset encounters an error
40. add code to protect for UDFs that have references to its input Model; add (hidden) option to create timingReport.txt file; improve flends; add flend9* test cases
41. update flend8* test cases and their verification data
42. fix lint error in udfMatchBodys; re-add 7.4.1 verification data for flend8* test cases
43. change flend fits to be better in some cases; track down memory leaks
44. fix problem erroneously flagged by lint in udpOffset; update errors reported by udfFlend; fix bug where wrong UDP storage was used in udfOffset (which caused problems when udpOffset was called more than once); remove SPECIAL test of EG_otherCurve; document .multiNode use in RULE command; fix bug where UDP storage is incorrectly cleared for an embedded UDP (in udpCsm); fix bug in udfFlend that sometimes did not correctly reverse one of the Loops; fix memory leak in EVALUATE EDGEKT, EDGECP, FACEUKT, FACEVKT, and FACECP when a signal is raised
45. fix compiler warning in latest commit
46. account for fact that Py_SetPythonHome was deprecated in Python 3.11; update udfOffset so that it can generate offsets on SolidBodys (for FLENDs); add offset(I-R)* test cases; use zebra stripe coloring for maximum curvature in ESP (displayType=4); update convertToBsplines to reuse Pcurves whenever possible; add udpBspline and bspline* test cases
47. improve printing of Pcurves in ocsmPrintEgo; improve marking of Faces with _body and _brch Attributes when returned from a UDF; add PRINT_MAPPING_INFO define to OpenCSM; fix bug that did not account for Node and Edge sensitivities when report sensitivity range in serveESP; fix bug that occasionally did not properly compute Node tessellation sensitivities
48. add EVALUATE EDGEKT, EVALUATE EDGECP, EVALUATE FACEUKT, EVALUATE FACEVKT, and EVALUATE FACECP; add evaluate3* test cases; add multiRegions* test cases; add SELECT FLIP to flip the order of rntities in at-sellist
49. add copyAttr=0 argument to RULE and BLEND to copy Edge Attributes in xsects onto RULE/BLEND Edges; add blend29 and rule29 test cases
50. improve test for matching Nodes in udfMatchBodys; adjust matchBodys5 test case to check at-at-parameters
51. add arcLengths to ocsmPrintEgo; fix bug in udfMatchBodys when tol was large
52. modify udfMatchBodys to transfer an Attribute from one Body to the other when the Nodes, Edges, or Faces match; add matchBody5 test case
53. fix bug associated with UDP/UDF outputs that change shape
54. remove stanalyzer false positive by disabling checks for one loop in udfTester1.c
55. attempt to fix stanalizer error in udfTester1.c
56. allow at-at-parameters from a UDP/UDF to have velocities; split udpTest into udfTester1 (to demonstrate matrix outputs from a UDP/UDF) and udpTester2 (to demonstrate output velocities from a UDP/UDF); adjust Makefiles and associated test cases
57. add test.so to Makefiles; add diagnostic printouts when a Face does not tessellate; make sure all UDP/UDFs return output values to the numUdp instance
58. allow number of rows and columns to be accessible in UDPs; allow at-at-parameters from a UDP/UDF to be vectors or matricies; add udp_error1 to udp_error9 as possible argument to CATBEG statement; fix bug that did not restore at-at-parameters when a UDP/UDF was recycled; refactor way UDP/UDF arguments are handled
59. update header files to allow use of C++ main program; add simpleCSM.cpp and modify Makefile.DARWIN64 for testing
60. change udfSlices to skip a slice if OpenCASCADE fails (rather than return an eror); add SET statement to udpWaffle; add waffleB1 and waffleB2 test cases; fix bug in plotting of normals in serveESP and serveCSM; add PRINT_RULE_KNOTS to print number of knots in BSPLINEs entering a RULE or BLEND; allow -ATTRREALSENS to indicate a UDPRIM parameter that is intended to signal that Parameter is used within an included file; add waffleB3 test case to demonstrate this; add waffleB3.jrnl to demonstrate generation of .sens file for every DESPMTR without rebuilds
61. update copyright notices
62. remove training/data/session10/version99/*
63. uprev to v1.23 (ESP.html, ESP-localhost.html, ESP-help.html, OpenCSM.h, ocsm.rc)
64. put 1 second delay when opening a pyscript to make sure that the browser is ready to display the pyscript in the editor; do not change status of ESP if an error was found while executing a pyscript; update session10 training files to be consistent with new method for creating a large, multi-component, multi-discipline model; update Makefile.DARWIN64; update ESP_QuickReference; update testScript.txt
65. write and test viewSimplySupport for transport test case
66. more updates to training/session10 and CAPS/training/python
67. more updates to transport training files
68. update error handling in flapz.udc; first attempt at python files for new transport for CAPS training
69. account for forward- and backward-slashes when opening a .udc
70. update ereped6a and project verification data again; fix recently-added bug that causes a memory fault for some non-manifold Edges
71. add Trace button in .csm editor to trace all top-level Parameters; reorganize session10 files to make it easier to build large, multi-component, multi-view models; update ereped6a, hollowC6, hollowC7, hollowCA, hollowCB, and project 3 verification data on 7.6.0 (because of issues highlighted by Xcode 14 on M1); update ereped6a and project3 verification data on 7.4.1 (because of issues highlighted by Xcode 14 on M1); add description of -dxdd flag to ESP-help
72. update testScript.txt; fix possible buffer overflow in SPECIAL command
73. update verification data for clearance1 and clerance4 to allow for slight differenes due to chaotic behavior of the EGADS tessellator
74. convert all (deprecated) sprintf calls to snprintf
75. update Verification.sh to use serveESP
76. fix bug where result of SPECIAL/clearance was not recycled
77. update .tsen files for designG5 and designG6
78. remove suppressions of sensitivity checks on designH2, designJ1c, designJ1d, and designJ5; add suppressions of sensitivity checks to designG5 and designG6 (for rounded tips); fix valgrind error in sensitivities in udpWaffle
79. fix some compiler warnings in most recent commit
80. add ocsmClearance; add clearance* test cases
81. fix bug in serveESP that did not properly update the build status message after File->Edit->Save; implement analytic sensitivities in udpWaffle; add designX* test cases; make sure userPointer gets reset after perturbation is removed
82. update designV1,gsen for 7.4
83. add ocsmAdjoint and testOcsmAdjoint (in serveESP); allow timPlotter to have two y-axes; add plotter3.py test case
84. update adjoint test to remove (incorrect) compiler warning
85. remove data/ide (because it is redundant with data/tutorial6); eliminate automatic build when entering CAPS mode (depend on the lazy evaluation in CAPS); enable sensitivity calculations for scribes and trims; add designW* test cases; fix bug that put wrong _edgeID on scribed Edges; update attrScribe, scribeWing, and scribedSphere test cases; create splitEdges.udc; add splitEdges* test cases
86. remember name of Pyscript file for next Tool->Pyscript; clean up ESP messages after builds; remove code in esp.timSetCaps that removed the _finalize method; fix memory problem in timViewer for very long scene-graph meta-data buffers; reset magic number to zero to catch cases when a MODL is tried to be used after ocsmFree; modify IMPORT so that it properly marks NODE_BODYs; force tessellation if needed in timViewer; fix bug in ocsmLoadFromEgads that did not properly initialize the .ileft and .irite Branches; remove underscore attributes in .egads files in ocsmLoadFromEgads; force python garbage collection at end of each pyscript execution; add interactive testScript
87. add PLOT_TESSSENS and PLOT_TEMPCOMPS flags to help in debugging tessellation sensitivities; remove tessellation velocity calculation shortcut to make Edge and Face tessellation velocities consistent; refactor signalError() and signalError2(); allow plotTypes =7 for x-component, =8 for y-component, =9 for z-component of sensitivity
88. clarify description of SELECT x -1 ibody1
89. update to account for latest EGADS fix to EG_generalBoolean
90. add ocsmRegBcstCB to ocsm.def
91. update Building button to show progress of build in ESP; fix memory leak when ELEVATE command fails (like it often does in the combine.udc); extend SELECT command to SELECT all Faces/Edges/Nodes in current Body that match a Face in another Body; add SELECT NOT to SELECT the Faces/Edges/Nodes not selected and vice versa; fix bug associated with determining if an Edge is a subset of another; update to account for change in EG_isEquivalent; fix bug that did not copy attributes from an Edge in a WireBody that was INTERSECTed with a SolidBody to the new Edge; add PRINT_LAST_EGO compile-time flag to print the last ego after every step in an ocsmBuild; fix bug in sensCSM when trying to remove .csm or .cpc extension from the casename when it did not exist; extend SELECT command to SELECT all Faces/Edges/Nodes in current Body that are within another Body
92. fix DUMP x.sens for degenerate Edges; add combine.udc so that old .csm scripts that used the (now deprecated) COMBINE command still work; add combine* test cases; add makeErep journal entry so that ereped can be tested; modify at-itype, at-nface, and at-nedge if there is an erep; add POWLE and POWTE arguments to udfDroop; add new droop* test cases; add udfNaca6mc to warp the input thickness distribution with the sum of multiple NACA 6-series meanlines; add naca6mc* test cases
93. protect against string overflows in strncpy and strncat; fix mesgCallbackFromOpenCSM so that it does not try to broadcast text when in batch mode; initial version of udpNaca6mc
94. Remove dependencies from file copies
95. clean up usage of include files; update dependencies in Makefile and NMakefile
96. remove pyscript from lint in serveESP.make
97. update serveCSM.make to fix stanilizer error for pyscript
98. another attempt to move building of pyscript from Makefile to serveESP.make
99. move building of pyscript from Makefile to serveESP.make
100. fix recently added bug in ereped that only allowed 9 colors; remove timHold from viewBodys.py; add batch flag to ESP structure; add assert command in browserToServer; add method of verifying ereped and plugs if running from journal and in -batch mode; next versions of udfDroop2 and udfDroop3; migrate testing in Makefile.DARWIN64 and Makefile.LINUX64 from serveCSM to serveESP; fix bug in esp.SetCaps() in pyESP
101. next version of udfDroop2; first version of udfDroop3
102. next (still incomplete) version of udfDroop2
103. initial version of udfDroop2
104. IGES reader now also reads all Name attributes. Fix stanalizer warning.
105. Reduce time extract Name attribute from STEP files.
106. Track STEP/IGES name attributes through all read manipulations
107. Lint fix
108. Use python or python3 executables in makeEnv
109. Fixes for Edge only tessellations
110. Undo Makefile change
111. One more adjustment to EG_mapBody
112. Only delete EG_mapBody mapped upen error if copied
113. Uprev to ESP 1.24. Add .C1side attribute for EG_blend. EG_blend now supports three neighboring C1 sections.
114. makeEnv fixes for -dev
115. makeEnv fix AFLR_ARCH for linux-aarch64. Add -dev option to makeEnv.
116. Add note about fighter4 on Intel macOS 13.3
117. Fix step and iges label read
118. Update concepts and viewer pdf. Fix for makeEnv.
119. Updates for ESP 1.23 release. Add LINUX_AARCH64 and DARWIN_ARM64 ESP_ARCH.
120. Fix bug in setup scripts
121. Fix bug in setup scripts
122. Update README files. Add PreBuilt setup scripts.
123. Fix last commit
124. Lint fixes
125. Fix stanalizer warning
126. Fix warning
127. Fix EG_mapTessBody for DEGENERATE Edges. Update makeEnv to look for python3. Readme updates.
128. Increase thread stack size on macOS
129. Fix warning
130. Lint fix
131. Fix lite stanalizer warning
132. Fix individual bodies in EG_generalBooelean. Other small cleanup.
133. Fix EG_getTopology instantiation
134. Add Surreal EG_getTopology
135. Fix ShapeFix for generalBoolean
136. Add more documentation on EGADS parent child referencing
137. Export EG_rotate_dot on Windoze
138. Track sensitvities with EG_repalceFaces
139. Add Surreal EG_makeTopology
140. Use ffp-model=strict on M1. Relax some test tolerances for M1.
141. Fix clang 14.0.3 warnings
142. Update EGADS doc for makeTessBody with negative legnth
143. Try fixing bodies in generalBoolean
144. Fix error message. Do not change topObj for bodies. Why does this not work...
145. Correctly set topObj for Geometry in Bodies. Set topObj for bodies in Models. Use EG_removeCntxtRef in makeFace. Check Body references before deleting a Model. More robust cleanup in EG_close.
146. Fix getEdgeUV doc
147. Fix full attirubtion for EG_repalceFaces. Fix error message.
148. Remove depricated x86 -m64 compiler flag. Add compiler flags for OCC 7.7.
149. Fix for OCC 7.4
150. Provide error message instead of segfault in EG_otherCurve
151. Add 1-bias to matchBody documentation
152. update return values from udpTire
153. Suppport Edge only eto files
154. update DARWIN64.gcc to add comma to RPATH needed by some gcc-10 compilers
155. Add back ESP_ROOT/lib to rpath on DARWIN
156. Use @loader_path for rpath to ESP_ROOT/lib on DARWIN
157. Update Copyright date
158. Uprev to 1.23
159. README release notes updates
160. Rev updates to 1.22
161. README updates
162. Update makeEnv for macOS 13
163. Replace DEBUG sprintf with snprintf
164. Try again: reorder includes!
165. Try again: MSVC 2022 seems to have snprintf defined!
166. sprintf -> snprintf mods
167. Replace sprintf with snprintf in egadsTopo
168. Suppress clang deprication warning of sprintf in OCC
169. Add simple figure for tri ordering with mixed quad faces
170. Allow unconverged SmoothUV status to continue during parameterization
171. Fix the new isEquivalent for periodic curves split into 2 Edges
172. modified Ints to Int32 and added egadslite tests
173. recompiled pdf references were with ??
174. removed EL flag from some of the effectiveTopology functions
175. fixed typos
176. Remove bug that would error out if there were no Faces during generalBoolean operations
177. Update isEquivalent to fix previous problem
178. Allow for senses to be flipped when applying EG_isEquivalent
179. added the ego. wrap to the getfield operation
180. update udpTire for new include scheme
181. Fix Edge mapping problem introduced since Rev 1.21
182. changed .obj -> .ego
183. Add TOML to egadslite dep
184. compiling for Julia 1.6 and 1.8. test fails for 1.8
185. Update makeEnv to reflect newer MAC OS revs
186. Add the Julia interface to the EGADS API documentation
187. Add data/vsp3/X57_Maxwell_CRM_v4.4.1.csm to csmIgnore for valgrind.
188. Downgrade to OpenVSP 3.34.0
189. Add vsp3 jenkins files
190. Add VSP3_ROOT for vsp3 testing
191. Add fighter4 as known error on macys
192. Upgrade to AFLR 11.5.9
193. Update to AFLR 11.5.8
194. Update xfoil executables with up to 2048 panels
195. Python suppressoin
196. Update parser
197. Another prebuilt fix
198. Fix PreBuilt script
199. Update PreBuilt testing
200. Update ESPbfr.tgz
201. Add OCC7.7 valgrind suppressions
202. Fix for jenkins script
203. Upgrade to SU2 7.5.1
204. Uprade to AFRL 11.4.5
205. Update clang sanitizer path
206. update so that more flend8* test cases are expected to pass
207. update so that more flend8* test cases are expected to pass
208. update expected flend8* failures
209. Put file names first
210. Add OCC 7.7 Jenkins data
211. add expected errors selected in flend8* test cases
212. Cart3D env fix
213. Upgrade Cart3D version
214. Update for OCC 7.7.0
215. Upgrade to AFLR 11.3.17
216. numpy memory leak suppression
217. Upgrade to AFLR 11.3.15
218. Add NETCDFINC for DARWIN64.gcc testing.
219. Don't build AFLR with Beta testing
220. Another exodus suppression
221. Suppresse NETCDF/HDF5 memory leaks
222. Upgrade to SU2 7.4.0
223. More general ubuntu suppression
224. Ubuntu valgrid supression
225. scipy 1.9.2. and 1.9.3 have valgrind issues
226. Add seacas to macys
227. Add SEACAS environment variable for exodus
228. Upgrade cvxopt build for gcc 12 on viggen
229. Suppress scipy memory leak
230. Another python valgrind suppression
231. Add Ubuntu 22.04 valgrind suppressions
232. Use system valgrind
233. Small cleanup of email template
234. Remove torch for now
235. Log parser fixes
236. Suppress torch memory leaks
237. Upgrade sanitizer path to 14.0.0
238. Try dissabling CUDA for pytorch
239. Look for fatal msvc errors
240. Look for fatal gnu/clang errors
241. Revert to serveCSM for plugs
242. Update lingering serveCSM to serveESP