Skipping 1,046 KB..
Full LogAFLR4 : Abs Min Surf Spacing = 0.0005
AFLR4 : Min Surf Spacing = 0.001
AFLR4 : Max Surf Spacing = 0.02
AFLR4 : Global Scale Factor = 1
AFLR4 : Geometry Definition Information
AFLR4 : Definition Definition Composite Grid BC
AFLR4 : ID Type ID Type
AFLR4 : 0 glue-only composite - -
AFLR4 : 1 CAD geometry 0 STD
AFLR4 : 2 CAD geometry 0 STD
AFLR4 : 3 CAD geometry 0 STD
AFLR4 : 4 CAD geometry 0 STD
AFLR4 : Define CAD surface definition 1
AFLR4 : Define CAD surface definition 2
AFLR4 : Define CAD surface definition 3
AFLR4 : Define CAD surface definition 4
AFLR43 : INPUT SURFACE MESH FROM TESS
AFLR43 : Quad Surface Faces= 0
AFLR43 : Tria Surface Faces= 120
AFLR43 : Nodes = 62
UG PARAM : SETTING INPUT PARAMETERS FROM ARGUMENT VECTOR
UG PARAM : mrecm = 3
UG PARAM : mrecqm = 3
UG PARAM : mpfrmt = 0
AFLR3 IC : INPUT SURFACE GRID CHECK
AFLR3 IC : Nodes, Elements = 62 0
UG3 : Boundary Conditions
UG3 : B-Face ID Boundary Condition
UG3 : 1 Solid
UG3 : 2 Solid
UG3 : 3 Solid
UG3 : 4 Solid
AFLR3 : CPU Time = 0.001 seconds
AFLR3 IG : INITIAL VOLUME GRID GENERATION
AFLR3 IG : Nodes, Elements = 62 0
AFLR3 IG : Nodes, Elements = 8 10
AFLR3 IG : Nodes, Elements = 14 40
AFLR3 IG : Nodes, Elements = 28 116
AFLR3 IG : Nodes, Elements = 42 203
AFLR3 IG : Nodes, Elements = 56 291
AFLR3 IG : Nodes, Elements = 69 359
AFLR3 IG : Nodes, Elements = 62 135
AFLR3 IG : Nodes, Elements = 62 128
AFLR3 IG : Nodes, Elements = 62 122
AFLR3 : CPU Time = 0.001 seconds
AFLR3 GG : ISOTROPIC VOLUME GRID GENERATION
AFLR3 GG : Nodes, Elements = 62 122
AFLR3 GG : Nodes, Elements = 65 131
AFLR3 GG : Nodes, Elements = 65 143
AFLR3 GG : Nodes, Elements = 65 136
AFLR3 GG : Nodes, Elements = 66 139
AFLR3 GG : Nodes, Elements = 66 143
AFLR3 GG : Nodes, Elements = 66 142
AFLR3 : CPU Time = 0.001 seconds
AFLR3 QI : QUALITY IMPROVEMENT
AFLR3 QI : Nodes, Elements = 66 142
AFLR3 QI : Nodes, Elements = 66 144
AFLR3 QI : Nodes, Elements = 66 142
AFLR3 QI : Nodes, Elements = 66 143
AFLR3 QI : Nodes, Elements = 66 142
AFLR3 : CPU Time = 0.000 seconds
AFLR3 : DONE
UG3 : DIHEDRAL ANGLE CHECK
UG3 : No. Tet Elems = 142
UG3 : Min, Max Ang = 15.56 151.3
UG3 : Average Angle = 70.2
UG3 : No. Angle>160.0 = 0
UG3 : No. Angle>179.9 = 0
UG3 : VOL CHECK
UG3 : Total-Volume = 0.0164
UG3 : No. Tet Elems = 142
UG3 : Min Vol = 2.98e-05
UG3 : Average Vol = 0.000115
UG3 : Total-Tet-Vol = 0.0164
UG3 : No. Vol<TOL = 0
UG3 : Q VOL-LENGTH-RATIO CHECK
2/3 2
UG3 : Q = c * Vol / sum( L )
UG3 : 0 <= Q <= 1
UG3 : No. Tet Elems = 142
UG3 : Min, Max Q = 0.438 0.992
UG3 : Average Q = 0.834
UG3 : No. Q< 0.1 = 0
UG3 : No. Q< 0.01 = 0
OVERALL : CPU Time = 0.009 seconds
UG3 : DIHEDRAL ANGLE CHECK
UG3 : No. Tet Elems = 142
UG3 : Min, Max Ang = 15.56 151.3
UG3 : Average Angle = 70.2
UG3 : No. Angle>160.0 = 0
UG3 : No. Angle>179.9 = 0
UG3 : VOL CHECK
UG3 : Total-Volume = 0.0164
UG3 : No. Tet Elems = 142
UG3 : Min Vol = 2.98e-05
UG3 : Average Vol = 0.000115
UG3 : Total-Tet-Vol = 0.0164
UG3 : No. Vol<TOL = 0
UG3 : Q VOL-LENGTH-RATIO CHECK
2/3 2
UG3 : Q = c * Vol / sum( L )
UG3 : 0 <= Q <= 1
UG3 : Note that L includes scaling for BL-aspect=ratio
UG3 : No. Tet Elems = 142
UG3 : Min, Max Q = 0.497 1
UG3 : Average Q = 0.877
UG3 : No. Q< 0.1 = 0
UG3 : No. Q< 0.01 = 0
UG3 : CPU Time = 0.000 seconds
EGADS : ---------------------------------------
EGADS : Engineering Geometry Aircraft Design System
EGADS : Version 1.26
EGADS : OpenCASCADE Version 7.8.0
EGADS : ---------------------------------------
EGADS : CREATE EGADS TESS FROM AFLR3 DATA
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 1
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 2
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 3
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 4
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 5
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 6
EGADS : CREATING TESSELLATION FOR BODY 0 FACE 1
EGADS : CREATING TESSELLATION FOR BODY 0 FACE 2
EGADS : CREATING TESSELLATION FOR BODY 0 FACE 3
EGADS : CREATING TESSELLATION FOR BODY 0 FACE 4
EGADS : EGADS TESS CREATED
EGADS : CHECK TESS FACE NODE MAP
EGADS : CHECKING NODE MAP FOR BODY 0 FACE 1
EGADS : CHECKING NODE MAP FOR BODY 0 FACE 2
EGADS : CHECKING NODE MAP FOR BODY 0 FACE 3
EGADS : CHECKING NODE MAP FOR BODY 0 FACE 4
Volume mesh:
Number of nodes = 280
Number of elements = 1098
Number of triangles = 508
Number of quadrilatarals = 0
Number of tetrahedrals = 590
Number of pyramids = 0
Number of prisms = 0
Number of hexahedrals = 0
Writing exodus file ....
Block: 'tableTop_tet', blk_id 1, num_entries 18
Block: 'leg0_tet', blk_id 2, num_entries 142
Block: 'leg1_tet', blk_id 3, num_entries 144
Block: 'leg2_tet', blk_id 4, num_entries 144
Block: 'leg3_tet', blk_id 5, num_entries 142
Sideset: 'leg0Side', set_id 1, num_entries 120
Sideset: 'leg1Side', set_id 2, num_entries 120
Sideset: 'leg2Side', set_id 3, num_entries 120
Sideset: 'leg3Side', set_id 4, num_entries 120
Sideset: 'tableTopSide', set_id 5, num_entries 28
Nodeset: 'edge', set_id 1, num_entries 3
Nodeset: 'face1', set_id 2, num_entries 10
Nodeset: 'face2', set_id 3, num_entries 10
Nodeset: 'node', set_id 4, num_entries 1
Finished writing Exodus file
Projecting tessellation 1 (of 5) on to new body
Projecting tessellation 2 (of 5) on to new body
Projecting tessellation 3 (of 5) on to new body
Projecting tessellation 4 (of 5) on to new body
Projecting tessellation 5 (of 5) on to new body
real 0m3.192s
user 0m2.419s
sys 0m0.855s
+ status=0
+ set +x
=================================================
CAPS verification (using pyCAPS) case plato_aflr_table_morph_PyTest.py passed (as expected)
=================================================
=================================================
+ echo 'plato_aflr_cyli_box_PyTest.py test;'
+ tee -a /Users/jenkins/workspace/ESP_MemcheckCaps/7.8/CAPS/STRUCTURE/DARWIN64/ESP/DARWIN64/examples/regressionTest/pyCAPSlog.txt
plato_aflr_cyli_box_PyTest.py test;
+ python -u plato_aflr_cyli_box_PyTest.py -outLevel=0
+ tee -a /Users/jenkins/workspace/ESP_MemcheckCaps/7.8/CAPS/STRUCTURE/DARWIN64/ESP/DARWIN64/examples/regressionTest/pyCAPSlog.txt
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 5
Name = box, index = 1
Name = cyl2, index = 2
Name = box;cyl2, index = 3
Name = cyl1, index = 4
Name = box;cyl1, index = 5
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 0
AFLR2 : ---------------------------------------
AFLR2 : AFLR2 LIBRARY
AFLR2 : ADVANCING-FRONT/LOCAL-RECONNECTION
AFLR2 : TRIA/QUAD GRID GENERATOR
AFLR2 : Version Number 9.17.15
AFLR2 : Version Date 04/23/24 @ 12:51AM
AFLR2 : Compile OS Darwin 23.4.0 x86_64
AFLR2 : Compile Date 04/23/24 @ 11:49AM
AFLR2 : Copyright 1994-2021, D.L. Marcum
AFLR2 : ---------------------------------------
AFLR4 : ---------------------------------------
AFLR4 : AFLR4 LIBRARY
AFLR4 : ADVANCING-FRONT/LOCAL-RECONNECTION
AFLR4 : TRIA/QUAD SURFACE GRID GENERATOR
AFLR4 : Version Number 11.5.14
AFLR4 : Version Date 04/18/24 @ 12:45PM
AFLR4 : Compile OS Darwin 23.4.0 x86_64
AFLR4 : Compile Date 04/23/24 @ 11:49AM
AFLR4 : Copyright 1994-2021, D.L. Marcum
AFLR4 : ---------------------------------------
EGADS : ---------------------------------------
EGADS : Engineering Geometry Aircraft Design System
EGADS : Version 1.26
EGADS : OpenCASCADE Version 7.8.0
EGADS : ---------------------------------------
EGADS : EGADS CAD Geometry Setup
EGADS : Model has 3 Active Bodies
EGADS : Body 0 is a SolidBody
EGADS : Body 0 has 1 Shells
EGADS : Body 0 has 8 Faces
EGADS : Body 0 has 18 Edges
EGADS : Body 0 has 10 Loops
EGADS : Body 0 has 12 Nodes
EGADS : Body 1 is a SolidBody
EGADS : Body 1 has 1 Shells
EGADS : Body 1 has 6 Faces
EGADS : Body 1 has 12 Edges
EGADS : Body 1 has 8 Loops
EGADS : Body 1 has 8 Nodes
EGADS : Body 2 is a SolidBody
EGADS : Body 2 has 1 Shells
EGADS : Body 2 has 4 Faces
EGADS : Body 2 has 6 Edges
EGADS : Body 2 has 4 Loops
EGADS : Body 2 has 4 Nodes
EGADS : Check Grid BCs
EGADS : Grid BCs are OK
EGADS : Face Neighbor-Faces Information
EGADS : QC = Face Quad Combination Flag
EGADS : IER = Face Isolated Edge Refinement Flag
EGADS : ER = Face Edge Refinement Factor
EGADS : Not applicable for Faces with a FarField Grid BC.
EGADS : SF = Face Scale Factor
EGADS : Not applicable for Faces with a FarField Grid BC.
EGADS : Face Body QC IER ER Scale Neighbor
EGADS : ID Active ID Flag Flag Weight Factor Faces
EGADS : 1 Yes 0 0 1 0 1 2 3 4 5
EGADS : 2 Yes 0 0 1 0 1 1 3 5 6 7 8
EGADS : 3 Yes 0 0 1 0 1 1 2 4 6
EGADS : 4 Yes 0 0 1 0 1 1 3 5 6 7 8
EGADS : 5 Yes 0 0 1 0 1 1 2 4 6
EGADS : 6 Yes 0 0 1 0 1 2 3 4 5
EGADS : 7 Yes 0 0 1 0 1 2 4 8
EGADS : 8 Yes 0 0 1 0 1 2 4 7
EGADS : 9 Yes 1 0 1 0 1 10 11 12 13
EGADS : 10 Yes 1 0 1 0 1 9 11 14
EGADS : 11 Yes 1 0 1 0 1 9 10 14
EGADS : 12 Yes 1 0 1 0 1 9 13 14
EGADS : 13 Yes 1 0 1 0 1 9 12 14
EGADS : 14 Yes 1 0 1 0 1 10 11 12 13
EGADS : 15 Yes 2 0 1 0 1 16 17
EGADS : 16 Yes 2 0 1 0 1 15 17 18
EGADS : 17 Yes 2 0 1 0 1 15 16 18
EGADS : 18 Yes 2 0 1 0 1 16 17
EGADS : Face Edges Information
EGADS : Face Edges
EGADS : 1 1 2 -3 -4
EGADS : 2 5 6 -7 -1 8 9
EGADS : 3 -2 7 11 -10
EGADS : 4 -12 3 10 -13 -14 -15
EGADS : 5 4 12 -16 -5
EGADS : 6 -6 16 13 -11
EGADS : 7 -17 -8 18 14
EGADS : 8 17 15 -18 -9
EGADS : 9 -19 -20 21 22
EGADS : 10 -23 19 25 -24
EGADS : 11 23 -26 -25 20
EGADS : 12 -27 -21 28 29
EGADS : 13 27 30 -28 -22
EGADS : 14 24 26 -29 -30
EGADS : 15 -31 -32
EGADS : 16 -33 31 35 -34
EGADS : 17 33 -36 -35 32
EGADS : 18 34 36
EGADS : Face Loops Information
EGADS : Face Loops
EGADS : 1 1
EGADS : 2 2 3
EGADS : 3 4
EGADS : 4 5 6
EGADS : 5 7
EGADS : 6 8
EGADS : 7 9
EGADS : 8 10
EGADS : 9 11 12
EGADS : 10 13
EGADS : 11 14
EGADS : 12 15
EGADS : 13 16
EGADS : 14 17 18
EGADS : 15 19
EGADS : 16 20
EGADS : 17 21
EGADS : 18 22
EGADS : Loop Edges Information
EGADS : Loop Active Edges
EGADS : 1 Yes 1 2 -3 -4
EGADS : 2 Yes 5 6 -7 -1
EGADS : 3 Yes 8 9
EGADS : 4 Yes -2 7 11 -10
EGADS : 5 Yes -12 3 10 -13
EGADS : 6 Yes -14 -15
EGADS : 7 Yes 4 12 -16 -5
EGADS : 8 Yes -6 16 13 -11
EGADS : 9 Yes -17 -8 18 14
EGADS : 10 Yes 17 15 -18 -9
EGADS : 11 Yes -19 -20
EGADS : 12 Yes 21 22
EGADS : 13 Yes -23 19 25 -24
EGADS : 14 Yes 23 -26 -25 20
EGADS : 15 Yes -27 -21 28 29
EGADS : 16 Yes 27 30 -28 -22
EGADS : 17 Yes 24 26
EGADS : 18 Yes -29 -30
EGADS : 19 Yes -31 -32
EGADS : 20 Yes -33 31 35 -34
EGADS : 21 Yes 33 -36 -35 32
EGADS : 22 Yes 34 36
EGADS : Edge Node, Scale Factor, and Neighbor-Faces Information
EGADS : ESF = Edge Scale Factor
EGADS : Not applicable for DEGENERATE Edges or Edges with a FarField
EGADS : Grid BC Neighbor Face.
EGADS : Neighbor
EGADS : Edge Body Active Node1 Node2 ESF Faces
EGADS : 1 0 Yes 2 1 1 1 2
EGADS : 2 0 Yes 1 3 1 1 3
EGADS : 3 0 Yes 4 3 1 1 4
EGADS : 4 0 Yes 2 4 1 1 5
EGADS : 5 0 Yes 2 5 1 2 5
EGADS : 6 0 Yes 5 6 1 2 6
EGADS : 7 0 Yes 1 6 1 2 3
EGADS : 8 0 Yes 7 8 1 2 7
EGADS : 9 0 Yes 8 7 1 2 8
EGADS : 10 0 Yes 3 9 1 3 4
EGADS : 11 0 Yes 6 9 1 3 6
EGADS : 12 0 Yes 4 10 1 4 5
EGADS : 13 0 Yes 10 9 1 4 6
EGADS : 14 0 Yes 11 12 1 4 7
EGADS : 15 0 Yes 12 11 1 4 8
EGADS : 16 0 Yes 5 10 1 5 6
EGADS : 17 0 Yes 8 12 1 7 8
EGADS : 18 0 Yes 7 11 1 7 8
EGADS : 19 1 Yes 13 14 1 9 10
EGADS : 20 1 Yes 14 13 1 9 11
EGADS : 21 1 Yes 15 16 1 9 12
EGADS : 22 1 Yes 16 15 1 9 13
EGADS : 23 1 Yes 13 17 1 10 11
EGADS : 24 1 Yes 17 18 1 10 14
EGADS : 25 1 Yes 14 18 1 10 11
EGADS : 26 1 Yes 18 17 1 11 14
EGADS : 27 1 Yes 16 19 1 12 13
EGADS : 28 1 Yes 15 20 1 12 13
EGADS : 29 1 Yes 20 19 1 12 14
EGADS : 30 1 Yes 19 20 1 13 14
EGADS : 31 2 Yes 21 22 1 15 16
EGADS : 32 2 Yes 22 21 1 15 17
EGADS : 33 2 Yes 21 23 1 16 17
EGADS : 34 2 Yes 23 24 1 16 18
EGADS : 35 2 Yes 22 24 1 16 17
EGADS : 36 2 Yes 24 23 1 17 18
EGADS : Node Information
EGADS : Node Active Coordinates
EGADS : 1 Yes 0 0 0.5
EGADS : 2 Yes 0 0 0
EGADS : 3 Yes 0 0.5 0.5
EGADS : 4 Yes 0 0.5 0
EGADS : 5 Yes 0.5 0 0
EGADS : 6 Yes 0.5 0 0.5
EGADS : 7 Yes 0 0 0.2
EGADS : 8 Yes 0 0 0
EGADS : 9 Yes 0.5 0.5 0.5
EGADS : 10 Yes 0.5 0.5 0
EGADS : 11 Yes 0 0.5 0.2
EGADS : 12 Yes 0 0.5 0
EGADS : 13 Yes 0 0 0
EGADS : 14 Yes 0 0 0.2
EGADS : 15 Yes 0 0 0.1
EGADS : 16 Yes 0 0 0
EGADS : 17 Yes 0 0.5 0
EGADS : 18 Yes 0 0.5 0.2
EGADS : 19 Yes 0 0.5 0
EGADS : 20 Yes 0 0.5 0.1
EGADS : 21 Yes 0 0 0
EGADS : 22 Yes 0 0 0.1
EGADS : 23 Yes 0 0.5 0
EGADS : 24 Yes 0 0.5 0.1
EGADS : Face and Edge Match Information
EGADS : Body 0 Face 7 Matches Body 1 Face 11
EGADS : Body 0 Face 8 Matches Body 1 Face 10
EGADS : Body 1 Face 12 Matches Body 2 Face 17
EGADS : Body 1 Face 13 Matches Body 2 Face 16
EGADS : Body 0 Edge 8 Matches Body 1 Edge 20
EGADS : Body 0 Edge 9 Matches Body 1 Edge 19
EGADS : Body 0 Edge 14 Matches Body 1 Edge 26
EGADS : Body 0 Edge 15 Matches Body 1 Edge 24
EGADS : Body 0 Edge 17 Matches Body 1 Edge 23
EGADS : Body 0 Edge 18 Matches Body 1 Edge 25
EGADS : Body 1 Edge 21 Matches Body 2 Edge 32
EGADS : Body 1 Edge 22 Matches Body 2 Edge 31
EGADS : Body 1 Edge 27 Matches Body 2 Edge 33
EGADS : Body 1 Edge 28 Matches Body 2 Edge 35
EGADS : Body 1 Edge 29 Matches Body 2 Edge 36
EGADS : Body 1 Edge 30 Matches Body 2 Edge 34
AFLR4 : Surface Mesh Spacing Setup
AFLR4 : Max Bounding Box Length = 1
AFLR4 : Min Bounding Box Length = 1
AFLR4 : Max Ref Bounding Box Length = 1
AFLR4 : Min Ref Bounding Box Length = 1
AFLR4 : Reference Length = 1
AFLR4 : BL Thickness = 0
AFLR4 : Abs Min Surf Spacing = 0.0025
AFLR4 : Min Surf Spacing = 0.005
AFLR4 : Max Surf Spacing = 0.1
AFLR4 : Global Scale Factor = 10
AFLR4 : Geometry Definition Information
AFLR4 : Definition Definition Composite Grid BC
AFLR4 : ID Type ID Type
AFLR4 : 0 glue-only composite - -
AFLR4 : 1 CAD geometry 0 STD
AFLR4 : 2 CAD geometry 0 STD
AFLR4 : 3 CAD geometry 0 STD
AFLR4 : 4 CAD geometry 0 STD
AFLR4 : 5 CAD geometry 0 STD
AFLR4 : 6 CAD geometry 0 STD
AFLR4 : 7 CAD geometry 0 STD
AFLR4 : 8 CAD geometry 0 STD
AFLR4 : 9 CAD geometry 0 STD
AFLR4 : 10 CAD geometry 0 STD
AFLR4 : 11 CAD geometry 0 STD
AFLR4 : 12 CAD geometry 0 STD
AFLR4 : 13 CAD geometry 0 STD
AFLR4 : 14 CAD geometry 0 STD
AFLR4 : 15 CAD geometry 0 STD
AFLR4 : 16 CAD geometry 0 STD
AFLR4 : 17 CAD geometry 0 STD
AFLR4 : 18 CAD geometry 0 STD
AFLR4 : Define CAD surface definition 1
AFLR4 : Define CAD surface definition 2
AFLR4 : Define CAD surface definition 3
AFLR4 : Define CAD surface definition 4
AFLR4 : Define CAD surface definition 5
AFLR4 : Define CAD surface definition 6
AFLR4 : Define CAD surface definition 7
AFLR4 : Define CAD surface definition 8
AFLR4 : Define CAD surface definition 9
AFLR4 : Define CAD surface definition 10
AFLR4 : Define CAD surface definition 11
AFLR4 : Define CAD surface definition 12
AFLR4 : Define CAD surface definition 13
AFLR4 : Define CAD surface definition 14
AFLR4 : Define CAD surface definition 15
AFLR4 : Define CAD surface definition 16
AFLR4 : Define CAD surface definition 17
AFLR4 : Define CAD surface definition 18
---------------------------------------------------------------
AFLR4 : Multi-Zone Mode
AFLR4 : Zone (Body) 0
---------------------------------------------------------------
EGADS : ---------------------------------------
EGADS : Engineering Geometry Aircraft Design System
EGADS : Version 1.26
EGADS : OpenCASCADE Version 7.8.0
EGADS : ---------------------------------------
EGADS : EGADS CAD Geometry Setup
EGADS : Model has 1 Active Bodies
EGADS : Body 0 is a SolidBody
EGADS : Body 0 has 1 Shells
EGADS : Body 0 has 8 Faces
EGADS : Body 0 has 18 Edges
EGADS : Body 0 has 10 Loops
EGADS : Body 0 has 12 Nodes
EGADS : Check Grid BCs
EGADS : Grid BCs are OK
EGADS : Face Neighbor-Faces Information
EGADS : QC = Face Quad Combination Flag
EGADS : IER = Face Isolated Edge Refinement Flag
EGADS : ER = Face Edge Refinement Factor
EGADS : Not applicable for Faces with a FarField Grid BC.
EGADS : SF = Face Scale Factor
EGADS : Not applicable for Faces with a FarField Grid BC.
EGADS : Face Body QC IER ER Scale Neighbor
EGADS : ID Active ID Flag Flag Weight Factor Faces
EGADS : 1 Yes 0 0 1 0 1 2 3 4 5
EGADS : 2 Yes 0 0 1 0 1 1 3 5 6 7 8
EGADS : 3 Yes 0 0 1 0 1 1 2 4 6
EGADS : 4 Yes 0 0 1 0 1 1 3 5 6 7 8
EGADS : 5 Yes 0 0 1 0 1 1 2 4 6
EGADS : 6 Yes 0 0 1 0 1 2 3 4 5
EGADS : 7 Yes 0 0 1 0 1 2 4 8
EGADS : 8 Yes 0 0 1 0 1 2 4 7
EGADS : Face Edges Information
EGADS : Face Edges
EGADS : 1 1 2 -3 -4
EGADS : 2 5 6 -7 -1 8 9
EGADS : 3 -2 7 11 -10
EGADS : 4 -12 3 10 -13 -14 -15
EGADS : 5 4 12 -16 -5
EGADS : 6 -6 16 13 -11
EGADS : 7 -17 -8 18 14
EGADS : 8 17 15 -18 -9
EGADS : Face Loops Information
EGADS : Face Loops
EGADS : 1 1
EGADS : 2 2 3
EGADS : 3 4
EGADS : 4 5 6
EGADS : 5 7
EGADS : 6 8
EGADS : 7 9
EGADS : 8 10
EGADS : Loop Edges Information
EGADS : Loop Active Edges
EGADS : 1 Yes 1 2 -3 -4
EGADS : 2 Yes 5 6 -7 -1
EGADS : 3 Yes 8 9
EGADS : 4 Yes -2 7 11 -10
EGADS : 5 Yes -12 3 10 -13
EGADS : 6 Yes -14 -15
EGADS : 7 Yes 4 12 -16 -5
EGADS : 8 Yes -6 16 13 -11
EGADS : 9 Yes -17 -8 18 14
EGADS : 10 Yes 17 15 -18 -9
EGADS : Edge Node, Scale Factor, and Neighbor-Faces Information
EGADS : ESF = Edge Scale Factor
EGADS : Not applicable for DEGENERATE Edges or Edges with a FarField
EGADS : Grid BC Neighbor Face.
EGADS : Neighbor
EGADS : Edge Body Active Node1 Node2 ESF Faces
EGADS : 1 0 Yes 2 1 1 1 2
EGADS : 2 0 Yes 1 3 1 1 3
EGADS : 3 0 Yes 4 3 1 1 4
EGADS : 4 0 Yes 2 4 1 1 5
EGADS : 5 0 Yes 2 5 1 2 5
EGADS : 6 0 Yes 5 6 1 2 6
EGADS : 7 0 Yes 1 6 1 2 3
EGADS : 8 0 Yes 7 8 1 2 7
EGADS : 9 0 Yes 8 7 1 2 8
EGADS : 10 0 Yes 3 9 1 3 4
EGADS : 11 0 Yes 6 9 1 3 6
EGADS : 12 0 Yes 4 10 1 4 5
EGADS : 13 0 Yes 10 9 1 4 6
EGADS : 14 0 Yes 11 12 1 4 7
EGADS : 15 0 Yes 12 11 1 4 8
EGADS : 16 0 Yes 5 10 1 5 6
EGADS : 17 0 Yes 8 12 1 7 8
EGADS : 18 0 Yes 7 11 1 7 8
EGADS : Node Information
EGADS : Node Active Coordinates
EGADS : 1 Yes 0 0 0.5
EGADS : 2 Yes 0 0 0
EGADS : 3 Yes 0 0.5 0.5
EGADS : 4 Yes 0 0.5 0
EGADS : 5 Yes 0.5 0 0
EGADS : 6 Yes 0.5 0 0.5
EGADS : 7 Yes 0 0 0.2
EGADS : 8 Yes 0 0 0
EGADS : 9 Yes 0.5 0.5 0.5
EGADS : 10 Yes 0.5 0.5 0
EGADS : 11 Yes 0 0.5 0.2
EGADS : 12 Yes 0 0.5 0
EGADS : Face and Edge Match Information
EGADS : No Face Matches Found
AFLR4 : Surface Mesh Spacing Setup
AFLR4 : Max Bounding Box Length = 1
AFLR4 : Min Bounding Box Length = 1
AFLR4 : Max Ref Bounding Box Length = 1
AFLR4 : Min Ref Bounding Box Length = 1
AFLR4 : Reference Length = 1
AFLR4 : BL Thickness = 0
AFLR4 : Abs Min Surf Spacing = 0.0025
AFLR4 : Min Surf Spacing = 0.005
AFLR4 : Max Surf Spacing = 0.1
AFLR4 : Global Scale Factor = 10
AFLR4 : Geometry Definition Information
AFLR4 : Definition Definition Composite Grid BC
AFLR4 : ID Type ID Type
AFLR4 : 0 glue-only composite - -
AFLR4 : 1 CAD geometry 0 STD
AFLR4 : 2 CAD geometry 0 STD
AFLR4 : 3 CAD geometry 0 STD
AFLR4 : 4 CAD geometry 0 STD
AFLR4 : 5 CAD geometry 0 STD
AFLR4 : 6 CAD geometry 0 STD
AFLR4 : 7 CAD geometry 0 STD
AFLR4 : 8 CAD geometry 0 STD
AFLR4 : Define CAD surface definition 1
AFLR4 : Define CAD surface definition 2
AFLR4 : Define CAD surface definition 3
AFLR4 : Define CAD surface definition 4
AFLR4 : Define CAD surface definition 5
AFLR4 : Define CAD surface definition 6
AFLR4 : Define CAD surface definition 7
AFLR4 : Define CAD surface definition 8
AFLR4 : Surface Grid Generation
AFLR4 : Generate optimal mesh on surface definition 1
AFLR2 : Nodes, Trias,Quads= 12 14 0
AFLR4 : Nodes, Trias,Quads= 8 6 0
AFLR4 : Generate optimal mesh on surface definition 2
AFLR2 : Nodes, Trias,Quads= 24 34 0
AFLR4 : Nodes, Trias,Quads= 16 18 0
AFLR4 : Generate optimal mesh on surface definition 3
AFLR2 : Nodes, Trias,Quads= 12 14 0
AFLR4 : Nodes, Trias,Quads= 8 6 0
AFLR4 : Generate optimal mesh on surface definition 4
AFLR2 : Nodes, Trias,Quads= 24 34 0
AFLR4 : Nodes, Trias,Quads= 17 20 0
AFLR4 : Generate optimal mesh on surface definition 5
AFLR2 : Nodes, Trias,Quads= 12 14 0
AFLR4 : Nodes, Trias,Quads= 8 6 0
AFLR4 : Generate optimal mesh on surface definition 6
AFLR2 : Nodes, Trias,Quads= 12 14 0
AFLR4 : Nodes, Trias,Quads= 8 6 0
AFLR4 : Generate optimal mesh on surface definition 7
AFLR2 : Nodes, Trias,Quads= 30 42 0
AFLR4 : Nodes, Trias,Quads= 30 42 0
AFLR4 : Generate optimal mesh on surface definition 8
AFLR2 : Nodes, Trias,Quads= 30 42 0
AFLR4 : Nodes, Trias,Quads= 30 42 0
DGEOM : Add surface definitions to composite definition 0
DGEOM : Glue composite surface definition 0
DGEOM : Nodes,Faces,BEdges= 73 146 92
AFLR4 : Auto Mode Turned OFF
OVERALL : CPU Time = 0.087 seconds
---------------------------------------------------------------
AFLR4 : Multi-Zone Mode
AFLR4 : Zone (Body) 1
---------------------------------------------------------------
EGADS : ---------------------------------------
EGADS : Engineering Geometry Aircraft Design System
EGADS : Version 1.26
EGADS : OpenCASCADE Version 7.8.0
EGADS : ---------------------------------------
EGADS : EGADS CAD Geometry Setup
EGADS : Model has 1 Active Bodies
EGADS : Body 0 is a SolidBody
EGADS : Body 0 has 1 Shells
EGADS : Body 0 has 6 Faces
EGADS : Body 0 has 12 Edges
EGADS : Body 0 has 8 Loops
EGADS : Body 0 has 8 Nodes
EGADS : Check Grid BCs
EGADS : Grid BCs are OK
EGADS : Face Neighbor-Faces Information
EGADS : QC = Face Quad Combination Flag
EGADS : IER = Face Isolated Edge Refinement Flag
EGADS : ER = Face Edge Refinement Factor
EGADS : Not applicable for Faces with a FarField Grid BC.
EGADS : SF = Face Scale Factor
EGADS : Not applicable for Faces with a FarField Grid BC.
EGADS : Face Body QC IER ER Scale Neighbor
EGADS : ID Active ID Flag Flag Weight Factor Faces
EGADS : 1 Yes 0 0 1 0 1 2 3 4 5
EGADS : 2 Yes 0 0 1 0 1 1 3 6
EGADS : 3 Yes 0 0 1 0 1 1 2 6
EGADS : 4 Yes 0 0 1 0 1 1 5 6
EGADS : 5 Yes 0 0 1 0 1 1 4 6
EGADS : 6 Yes 0 0 1 0 1 2 3 4 5
EGADS : Face Edges Information
EGADS : Face Edges
EGADS : 1 -1 -2 3 4
EGADS : 2 -5 1 7 -6
EGADS : 3 5 -8 -7 2
EGADS : 4 -9 -3 10 11
EGADS : 5 9 12 -10 -4
EGADS : 6 6 8 -11 -12
EGADS : Face Loops Information
EGADS : Face Loops
EGADS : 1 1 2
EGADS : 2 3
EGADS : 3 4
EGADS : 4 5
EGADS : 5 6
EGADS : 6 7 8
EGADS : Loop Edges Information
EGADS : Loop Active Edges
EGADS : 1 Yes -1 -2
EGADS : 2 Yes 3 4
EGADS : 3 Yes -5 1 7 -6
EGADS : 4 Yes 5 -8 -7 2
EGADS : 5 Yes -9 -3 10 11
EGADS : 6 Yes 9 12 -10 -4
EGADS : 7 Yes 6 8
EGADS : 8 Yes -11 -12
EGADS : Edge Node, Scale Factor, and Neighbor-Faces Information
EGADS : ESF = Edge Scale Factor
EGADS : Not applicable for DEGENERATE Edges or Edges with a FarField
EGADS : Grid BC Neighbor Face.
EGADS : Neighbor
EGADS : Edge Body Active Node1 Node2 ESF Faces
EGADS : 1 0 Yes 1 2 1 1 2
EGADS : 2 0 Yes 2 1 1 1 3
EGADS : 3 0 Yes 3 4 1 1 4
EGADS : 4 0 Yes 4 3 1 1 5
EGADS : 5 0 Yes 1 5 1 2 3
EGADS : 6 0 Yes 5 6 1 2 6
EGADS : 7 0 Yes 2 6 1 2 3
EGADS : 8 0 Yes 6 5 1 3 6
EGADS : 9 0 Yes 4 7 1 4 5
EGADS : 10 0 Yes 3 8 1 4 5
EGADS : 11 0 Yes 8 7 1 4 6
EGADS : 12 0 Yes 7 8 1 5 6
EGADS : Node Information
EGADS : Node Active Coordinates
EGADS : 1 Yes 2.4492936e-17 0 0
EGADS : 2 Yes 0 0 0.2
EGADS : 3 Yes 0 0 0.1
EGADS : 4 Yes 1.2246468e-17 0 0
EGADS : 5 Yes 2.4492936e-17 0.5 0
EGADS : 6 Yes 0 0.5 0.2
EGADS : 7 Yes 1.2246468e-17 0.5 0
EGADS : 8 Yes 0 0.5 0.1
EGADS : Face and Edge Match Information
EGADS : No Face Matches Found
AFLR4 : Surface Mesh Spacing Setup
AFLR4 : Max Bounding Box Length = 1
AFLR4 : Min Bounding Box Length = 0.4
AFLR4 : Max Ref Bounding Box Length = 1
AFLR4 : Min Ref Bounding Box Length = 0.4
AFLR4 : Reference Length = 1
AFLR4 : BL Thickness = 0
AFLR4 : Abs Min Surf Spacing = 0.0025
AFLR4 : Min Surf Spacing = 0.005
AFLR4 : Max Surf Spacing = 0.1
AFLR4 : Global Scale Factor = 10
AFLR4 : Geometry Definition Information
AFLR4 : Definition Definition Composite Grid BC
AFLR4 : ID Type ID Type
AFLR4 : 0 glue-only composite - -
AFLR4 : 1 CAD geometry 0 STD
AFLR4 : 2 CAD geometry 0 STD
AFLR4 : 3 CAD geometry 0 STD
AFLR4 : 4 CAD geometry 0 STD
AFLR4 : 5 CAD geometry 0 STD
AFLR4 : 6 CAD geometry 0 STD
AFLR4 : Define CAD surface definition 1
AFLR4 : Define CAD surface definition 2
AFLR4 : Define CAD surface definition 3
AFLR4 : Define CAD surface definition 4
AFLR4 : Define CAD surface definition 5
AFLR4 : Define CAD surface definition 6
AFLR4 : Surface Grid Generation
AFLR4 : Generate optimal mesh on surface definition 1
AFLR2 : Nodes, Trias,Quads= 24 34 0
AFLR4 : Nodes, Trias,Quads= 14 14 0
AFLR4 : Generate optimal mesh on surface definition 2
AFLR2 : Nodes, Trias,Quads= 30 42 0
AFLR4 : Nodes, Trias,Quads= 30 42 0
AFLR4 : Generate optimal mesh on surface definition 3
AFLR2 : Nodes, Trias,Quads= 30 42 0
AFLR4 : Nodes, Trias,Quads= 30 42 0
AFLR4 : Generate optimal mesh on surface definition 4
AFLR2 : Nodes, Trias,Quads= 59 88 0
AFLR4 : Nodes, Trias,Quads= 58 86 0
AFLR4 : Generate optimal mesh on surface definition 5
AFLR2 : Nodes, Trias,Quads= 59 88 0
AFLR4 : Nodes, Trias,Quads= 58 86 0
AFLR4 : Generate optimal mesh on surface definition 6
AFLR2 : Nodes, Trias,Quads= 24 34 0
AFLR4 : Nodes, Trias,Quads= 14 14 0
DGEOM : Add surface definitions to composite definition 0
DGEOM : Glue composite surface definition 0
DGEOM : Nodes,Faces,BEdges= 142 284 116
OVERALL : CPU Time = 0.060 seconds
---------------------------------------------------------------
AFLR4 : Multi-Zone Mode
AFLR4 : Zone (Body) 2
---------------------------------------------------------------
EGADS : ---------------------------------------
EGADS : Engineering Geometry Aircraft Design System
EGADS : Version 1.26
EGADS : OpenCASCADE Version 7.8.0
EGADS : ---------------------------------------
EGADS : EGADS CAD Geometry Setup
EGADS : Model has 1 Active Bodies
EGADS : Body 0 is a SolidBody
EGADS : Body 0 has 1 Shells
EGADS : Body 0 has 4 Faces
EGADS : Body 0 has 6 Edges
EGADS : Body 0 has 4 Loops
EGADS : Body 0 has 4 Nodes
EGADS : Check Grid BCs
EGADS : Grid BCs are OK
EGADS : Face Neighbor-Faces Information
EGADS : QC = Face Quad Combination Flag
EGADS : IER = Face Isolated Edge Refinement Flag
EGADS : ER = Face Edge Refinement Factor
EGADS : Not applicable for Faces with a FarField Grid BC.
EGADS : SF = Face Scale Factor
EGADS : Not applicable for Faces with a FarField Grid BC.
EGADS : Face Body QC IER ER Scale Neighbor
EGADS : ID Active ID Flag Flag Weight Factor Faces
EGADS : 1 Yes 0 0 1 0 1 2 3
EGADS : 2 Yes 0 0 1 0 1 1 3 4
EGADS : 3 Yes 0 0 1 0 1 1 2 4
EGADS : 4 Yes 0 0 1 0 1 2 3
EGADS : Face Edges Information
EGADS : Face Edges
EGADS : 1 -1 -2
EGADS : 2 -3 1 5 -4
EGADS : 3 3 -6 -5 2
EGADS : 4 4 6
EGADS : Face Loops Information
EGADS : Face Loops
EGADS : 1 1
EGADS : 2 2
EGADS : 3 3
EGADS : 4 4
EGADS : Loop Edges Information
EGADS : Loop Active Edges
EGADS : 1 Yes -1 -2
EGADS : 2 Yes -3 1 5 -4
EGADS : 3 Yes 3 -6 -5 2
EGADS : 4 Yes 4 6
EGADS : Edge Node, Scale Factor, and Neighbor-Faces Information
EGADS : ESF = Edge Scale Factor
EGADS : Not applicable for DEGENERATE Edges or Edges with a FarField
EGADS : Grid BC Neighbor Face.
EGADS : Neighbor
EGADS : Edge Body Active Node1 Node2 ESF Faces
EGADS : 1 0 Yes 1 2 1 1 2
EGADS : 2 0 Yes 2 1 1 1 3
EGADS : 3 0 Yes 1 3 1 2 3
EGADS : 4 0 Yes 3 4 1 2 4
EGADS : 5 0 Yes 2 4 1 2 3
EGADS : 6 0 Yes 4 3 1 3 4
EGADS : Node Information
EGADS : Node Active Coordinates
EGADS : 1 Yes 1.2246468e-17 0 0
EGADS : 2 Yes 0 0 0.1
EGADS : 3 Yes 1.2246468e-17 0.5 0
EGADS : 4 Yes 0 0.5 0.1
EGADS : Face and Edge Match Information
EGADS : No Face Matches Found
AFLR4 : Surface Mesh Spacing Setup
AFLR4 : Max Bounding Box Length = 1
AFLR4 : Min Bounding Box Length = 0.2
AFLR4 : Max Ref Bounding Box Length = 1
AFLR4 : Min Ref Bounding Box Length = 0.2
AFLR4 : Reference Length = 1
AFLR4 : BL Thickness = 0
AFLR4 : Abs Min Surf Spacing = 0.0025
AFLR4 : Min Surf Spacing = 0.005
AFLR4 : Max Surf Spacing = 0.1
AFLR4 : Global Scale Factor = 10
AFLR4 : Geometry Definition Information
AFLR4 : Definition Definition Composite Grid BC
AFLR4 : ID Type ID Type
AFLR4 : 0 glue-only composite - -
AFLR4 : 1 CAD geometry 0 STD
AFLR4 : 2 CAD geometry 0 STD
AFLR4 : 3 CAD geometry 0 STD
AFLR4 : 4 CAD geometry 0 STD
AFLR4 : Define CAD surface definition 1
AFLR4 : Define CAD surface definition 2
AFLR4 : Define CAD surface definition 3
AFLR4 : Define CAD surface definition 4
AFLR4 : Surface Grid Generation
AFLR4 : Generate optimal mesh on surface definition 1
AFLR2 : Nodes, Trias,Quads= 9 8 0
AFLR4 : Nodes, Trias,Quads= 9 8 0
AFLR4 : Generate optimal mesh on surface definition 2
AFLR2 : Nodes, Trias,Quads= 59 88 0
AFLR4 : Nodes, Trias,Quads= 58 86 0
AFLR4 : Generate optimal mesh on surface definition 3
AFLR2 : Nodes, Trias,Quads= 59 88 0
AFLR4 : Nodes, Trias,Quads= 58 86 0
AFLR4 : Generate optimal mesh on surface definition 4
AFLR2 : Nodes, Trias,Quads= 9 8 0
AFLR4 : Nodes, Trias,Quads= 9 8 0
DGEOM : Add surface definitions to composite definition 0
DGEOM : Glue composite surface definition 0
DGEOM : Nodes,Faces,BEdges= 96 188 72
OVERALL : CPU Time = 0.036 seconds
---------------------------------------------------------------
EGADS : Zone (Body) 0
DGEOM : Add surface definitions to composite definition 0
DGEOM : Glue composite surface definition 0
DGEOM : Nodes,Faces,BEdges= 73 146 92
EGADS : Zone (Body) 1
DGEOM : Add surface definitions to composite definition 0
DGEOM : Glue composite surface definition 0
DGEOM : Nodes,Faces,BEdges= 142 284 116
EGADS : Zone (Body) 2
DGEOM : Add surface definitions to composite definition 0
DGEOM : Glue composite surface definition 0
DGEOM : Nodes,Faces,BEdges= 96 188 72
---------------------------------------------------------------
EGADS : Combine Multi-Zone Glue-Only Composites
EGADS : Nodes,Faces,BEdges= 311 618 280
---------------------------------------------------------------
Body 1 (of 3)
Number of nodes = 73
Number of elements = 146
Number of triangle elements = 146
Number of quadrilateral elements = 0
Body 2 (of 3)
Number of nodes = 142
Number of elements = 284
Number of triangle elements = 284
Number of quadrilateral elements = 0
Body 3 (of 3)
Number of nodes = 96
Number of elements = 188
Number of triangle elements = 188
Number of quadrilateral elements = 0
----------------------------
Total number of nodes = 311
Total number of elements = 618
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 5
Name = box, index = 1
Name = cyl2, index = 2
Name = box;cyl2, index = 3
Name = cyl1, index = 4
Name = box;cyl1, index = 5
Getting volume mesh
UG PARAM : SETTING INPUT PARAMETERS FROM ARGUMENT VECTOR
UG PARAM : mrecm = 3
UG PARAM : mrecqm = 3
UG PARAM : mpfrmt = 0
AFLR2 : ---------------------------------------
AFLR2 : AFLR2 LIBRARY
AFLR2 : ADVANCING-FRONT/LOCAL-RECONNECTION
AFLR2 : TRIA/QUAD GRID GENERATOR
AFLR2 : Version Number 9.17.15
AFLR2 : Version Date 04/23/24 @ 12:51AM
AFLR2 : Compile OS Darwin 23.4.0 x86_64
AFLR2 : Compile Date 04/23/24 @ 11:49AM
AFLR2 : Copyright 1994-2021, D.L. Marcum
AFLR2 : ---------------------------------------
AFLR4 : ---------------------------------------
AFLR4 : AFLR4 LIBRARY
AFLR4 : ADVANCING-FRONT/LOCAL-RECONNECTION
AFLR4 : TRIA/QUAD SURFACE GRID GENERATOR
AFLR4 : Version Number 11.5.14
AFLR4 : Version Date 04/18/24 @ 12:45PM
AFLR4 : Compile OS Darwin 23.4.0 x86_64
AFLR4 : Compile Date 04/23/24 @ 11:49AM
AFLR4 : Copyright 1994-2021, D.L. Marcum
AFLR4 : ---------------------------------------
EGADS : ---------------------------------------
EGADS : Engineering Geometry Aircraft Design System
EGADS : Version 1.26
EGADS : OpenCASCADE Version 7.8.0
EGADS : ---------------------------------------
EGADS : EGADS CAD Geometry Setup
EGADS : Model has 3 Active Bodies
EGADS : Body 0 is a SolidBody
EGADS : Body 0 has 1 Shells
EGADS : Body 0 has 8 Faces
EGADS : Body 0 has 18 Edges
EGADS : Body 0 has 10 Loops
EGADS : Body 0 has 12 Nodes
EGADS : Body 1 is a SolidBody
EGADS : Body 1 has 1 Shells
EGADS : Body 1 has 6 Faces
EGADS : Body 1 has 12 Edges
EGADS : Body 1 has 8 Loops
EGADS : Body 1 has 8 Nodes
EGADS : Body 2 is a SolidBody
EGADS : Body 2 has 1 Shells
EGADS : Body 2 has 4 Faces
EGADS : Body 2 has 6 Edges
EGADS : Body 2 has 4 Loops
EGADS : Body 2 has 4 Nodes
EGADS : Check Grid BCs
EGADS : Grid BCs are OK
EGADS : Face Neighbor-Faces Information
EGADS : QC = Face Quad Combination Flag
EGADS : IER = Face Isolated Edge Refinement Flag
EGADS : ER = Face Edge Refinement Factor
EGADS : Not applicable for Faces with a FarField Grid BC.
EGADS : SF = Face Scale Factor
EGADS : Not applicable for Faces with a FarField Grid BC.
EGADS : Face Body QC IER ER Scale Neighbor
EGADS : ID Active ID Flag Flag Weight Factor Faces
EGADS : 1 Yes 0 0 1 0 1 2 3 4 5
EGADS : 2 Yes 0 0 1 0 1 1 3 5 6 7 8
EGADS : 3 Yes 0 0 1 0 1 1 2 4 6
EGADS : 4 Yes 0 0 1 0 1 1 3 5 6 7 8
EGADS : 5 Yes 0 0 1 0 1 1 2 4 6
EGADS : 6 Yes 0 0 1 0 1 2 3 4 5
EGADS : 7 Yes 0 0 1 0 1 2 4 8
EGADS : 8 Yes 0 0 1 0 1 2 4 7
EGADS : 9 Yes 1 0 1 0 1 10 11 12 13
EGADS : 10 Yes 1 0 1 0 1 9 11 14
EGADS : 11 Yes 1 0 1 0 1 9 10 14
EGADS : 12 Yes 1 0 1 0 1 9 13 14
EGADS : 13 Yes 1 0 1 0 1 9 12 14
EGADS : 14 Yes 1 0 1 0 1 10 11 12 13
EGADS : 15 Yes 2 0 1 0 1 16 17
EGADS : 16 Yes 2 0 1 0 1 15 17 18
EGADS : 17 Yes 2 0 1 0 1 15 16 18
EGADS : 18 Yes 2 0 1 0 1 16 17
EGADS : Face Edges Information
EGADS : Face Edges
EGADS : 1 1 2 -3 -4
EGADS : 2 5 6 -7 -1 8 9
EGADS : 3 -2 7 11 -10
EGADS : 4 -12 3 10 -13 -14 -15
EGADS : 5 4 12 -16 -5
EGADS : 6 -6 16 13 -11
EGADS : 7 -17 -8 18 14
EGADS : 8 17 15 -18 -9
EGADS : 9 -19 -20 21 22
EGADS : 10 -23 19 25 -24
EGADS : 11 23 -26 -25 20
EGADS : 12 -27 -21 28 29
EGADS : 13 27 30 -28 -22
EGADS : 14 24 26 -29 -30
EGADS : 15 -31 -32
EGADS : 16 -33 31 35 -34
EGADS : 17 33 -36 -35 32
EGADS : 18 34 36
EGADS : Face Loops Information
EGADS : Face Loops
EGADS : 1 1
EGADS : 2 2 3
EGADS : 3 4
EGADS : 4 5 6
EGADS : 5 7
EGADS : 6 8
EGADS : 7 9
EGADS : 8 10
EGADS : 9 11 12
EGADS : 10 13
EGADS : 11 14
EGADS : 12 15
EGADS : 13 16
EGADS : 14 17 18
EGADS : 15 19
EGADS : 16 20
EGADS : 17 21
EGADS : 18 22
EGADS : Loop Edges Information
EGADS : Loop Active Edges
EGADS : 1 Yes 1 2 -3 -4
EGADS : 2 Yes 5 6 -7 -1
EGADS : 3 Yes 8 9
EGADS : 4 Yes -2 7 11 -10
EGADS : 5 Yes -12 3 10 -13
EGADS : 6 Yes -14 -15
EGADS : 7 Yes 4 12 -16 -5
EGADS : 8 Yes -6 16 13 -11
EGADS : 9 Yes -17 -8 18 14
EGADS : 10 Yes 17 15 -18 -9
EGADS : 11 Yes -19 -20
EGADS : 12 Yes 21 22
EGADS : 13 Yes -23 19 25 -24
EGADS : 14 Yes 23 -26 -25 20
EGADS : 15 Yes -27 -21 28 29
EGADS : 16 Yes 27 30 -28 -22
EGADS : 17 Yes 24 26
EGADS : 18 Yes -29 -30
EGADS : 19 Yes -31 -32
EGADS : 20 Yes -33 31 35 -34
EGADS : 21 Yes 33 -36 -35 32
EGADS : 22 Yes 34 36
EGADS : Edge Node, Scale Factor, and Neighbor-Faces Information
EGADS : ESF = Edge Scale Factor
EGADS : Not applicable for DEGENERATE Edges or Edges with a FarField
EGADS : Grid BC Neighbor Face.
EGADS : Neighbor
EGADS : Edge Body Active Node1 Node2 ESF Faces
EGADS : 1 0 Yes 2 1 1 1 2
EGADS : 2 0 Yes 1 3 1 1 3
EGADS : 3 0 Yes 4 3 1 1 4
EGADS : 4 0 Yes 2 4 1 1 5
EGADS : 5 0 Yes 2 5 1 2 5
EGADS : 6 0 Yes 5 6 1 2 6
EGADS : 7 0 Yes 1 6 1 2 3
EGADS : 8 0 Yes 7 8 1 2 7
EGADS : 9 0 Yes 8 7 1 2 8
EGADS : 10 0 Yes 3 9 1 3 4
EGADS : 11 0 Yes 6 9 1 3 6
EGADS : 12 0 Yes 4 10 1 4 5
EGADS : 13 0 Yes 10 9 1 4 6
EGADS : 14 0 Yes 11 12 1 4 7
EGADS : 15 0 Yes 12 11 1 4 8
EGADS : 16 0 Yes 5 10 1 5 6
EGADS : 17 0 Yes 8 12 1 7 8
EGADS : 18 0 Yes 7 11 1 7 8
EGADS : 19 1 Yes 13 14 1 9 10
EGADS : 20 1 Yes 14 13 1 9 11
EGADS : 21 1 Yes 15 16 1 9 12
EGADS : 22 1 Yes 16 15 1 9 13
EGADS : 23 1 Yes 13 17 1 10 11
EGADS : 24 1 Yes 17 18 1 10 14
EGADS : 25 1 Yes 14 18 1 10 11
EGADS : 26 1 Yes 18 17 1 11 14
EGADS : 27 1 Yes 16 19 1 12 13
EGADS : 28 1 Yes 15 20 1 12 13
EGADS : 29 1 Yes 20 19 1 12 14
EGADS : 30 1 Yes 19 20 1 13 14
EGADS : 31 2 Yes 21 22 1 15 16
EGADS : 32 2 Yes 22 21 1 15 17
EGADS : 33 2 Yes 21 23 1 16 17
EGADS : 34 2 Yes 23 24 1 16 18
EGADS : 35 2 Yes 22 24 1 16 17
EGADS : 36 2 Yes 24 23 1 17 18
EGADS : Node Information
EGADS : Node Active Coordinates
EGADS : 1 Yes 0 0 0.5
EGADS : 2 Yes 0 0 0
EGADS : 3 Yes 0 0.5 0.5
EGADS : 4 Yes 0 0.5 0
EGADS : 5 Yes 0.5 0 0
EGADS : 6 Yes 0.5 0 0.5
EGADS : 7 Yes 0 0 0.2
EGADS : 8 Yes 0 0 0
EGADS : 9 Yes 0.5 0.5 0.5
EGADS : 10 Yes 0.5 0.5 0
EGADS : 11 Yes 0 0.5 0.2
EGADS : 12 Yes 0 0.5 0
EGADS : 13 Yes 0 0 0
EGADS : 14 Yes 0 0 0.2
EGADS : 15 Yes 0 0 0.1
EGADS : 16 Yes 0 0 0
EGADS : 17 Yes 0 0.5 0
EGADS : 18 Yes 0 0.5 0.2
EGADS : 19 Yes 0 0.5 0
EGADS : 20 Yes 0 0.5 0.1
EGADS : 21 Yes 0 0 0
EGADS : 22 Yes 0 0 0.1
EGADS : 23 Yes 0 0.5 0
EGADS : 24 Yes 0 0.5 0.1
EGADS : Face and Edge Match Information
EGADS : Body 0 Face 7 Matches Body 1 Face 11
EGADS : Body 0 Face 8 Matches Body 1 Face 10
EGADS : Body 1 Face 12 Matches Body 2 Face 17
EGADS : Body 1 Face 13 Matches Body 2 Face 16
EGADS : Body 0 Edge 8 Matches Body 1 Edge 20
EGADS : Body 0 Edge 9 Matches Body 1 Edge 19
EGADS : Body 0 Edge 14 Matches Body 1 Edge 26
EGADS : Body 0 Edge 15 Matches Body 1 Edge 24
EGADS : Body 0 Edge 17 Matches Body 1 Edge 23
EGADS : Body 0 Edge 18 Matches Body 1 Edge 25
EGADS : Body 1 Edge 21 Matches Body 2 Edge 32
EGADS : Body 1 Edge 22 Matches Body 2 Edge 31
EGADS : Body 1 Edge 27 Matches Body 2 Edge 33
EGADS : Body 1 Edge 28 Matches Body 2 Edge 35
EGADS : Body 1 Edge 29 Matches Body 2 Edge 36
EGADS : Body 1 Edge 30 Matches Body 2 Edge 34
AFLR4 : Surface Mesh Spacing Setup
AFLR4 : Max Bounding Box Length = 1
AFLR4 : Min Bounding Box Length = 1
AFLR4 : Max Ref Bounding Box Length = 1
AFLR4 : Min Ref Bounding Box Length = 1
AFLR4 : Reference Length = 1
AFLR4 : BL Thickness = 0
AFLR4 : Abs Min Surf Spacing = 0.0025
AFLR4 : Min Surf Spacing = 0.005
AFLR4 : Max Surf Spacing = 0.1
AFLR4 : Global Scale Factor = 1
AFLR4 : Geometry Definition Information
AFLR4 : Definition Definition Composite Grid BC
AFLR4 : ID Type ID Type
AFLR4 : 0 glue-only composite - -
AFLR4 : 1 CAD geometry 0 STD
AFLR4 : 2 CAD geometry 0 STD
AFLR4 : 3 CAD geometry 0 STD
AFLR4 : 4 CAD geometry 0 STD
AFLR4 : 5 CAD geometry 0 STD
AFLR4 : 6 CAD geometry 0 STD
AFLR4 : 7 CAD geometry 0 STD
AFLR4 : 8 CAD geometry 0 STD
AFLR4 : 9 CAD geometry 0 STD
AFLR4 : 10 CAD geometry 0 STD
AFLR4 : 11 CAD geometry 0 STD
AFLR4 : 12 CAD geometry 0 STD
AFLR4 : 13 CAD geometry 0 STD
AFLR4 : 14 CAD geometry 0 STD
AFLR4 : 15 CAD geometry 0 STD
AFLR4 : 16 CAD geometry 0 STD
AFLR4 : 17 CAD geometry 0 STD
AFLR4 : 18 CAD geometry 0 STD
AFLR4 : Define CAD surface definition 1
AFLR4 : Define CAD surface definition 2
AFLR4 : Define CAD surface definition 3
AFLR4 : Define CAD surface definition 4
AFLR4 : Define CAD surface definition 5
AFLR4 : Define CAD surface definition 6
AFLR4 : Define CAD surface definition 7
AFLR4 : Define CAD surface definition 8
AFLR4 : Define CAD surface definition 9
AFLR4 : Define CAD surface definition 10
AFLR4 : Define CAD surface definition 11
AFLR4 : Define CAD surface definition 12
AFLR4 : Define CAD surface definition 13
AFLR4 : Define CAD surface definition 14
AFLR4 : Define CAD surface definition 15
AFLR4 : Define CAD surface definition 16
AFLR4 : Define CAD surface definition 17
AFLR4 : Define CAD surface definition 18
AFLR43 : INPUT SURFACE MESH FROM TESS
AFLR43 : Quad Surface Faces= 0
AFLR43 : Tria Surface Faces= 146
AFLR43 : Nodes = 73
UG PARAM : SETTING INPUT PARAMETERS FROM ARGUMENT VECTOR
UG PARAM : mrecm = 3
UG PARAM : mrecqm = 3
UG PARAM : mpfrmt = 0
AFLR3 : ---------------------------------------
AFLR3 : AFLR3 LIBRARY
AFLR3 : ADVANCING-FRONT/LOCAL-RECONNECTION
AFLR3 : TETRAHEDRAL GRID GENERATOR
AFLR3 : Version Number 16.32.50
AFLR3 : Version Date 10/31/23 @ 06:31PM
AFLR3 : Compile OS Darwin 22.6.0 x86_64
AFLR3 : Compile Date 11/01/23 @ 12:19PM
AFLR3 : Copyright 1994-2021, D.L. Marcum
AFLR3 : ---------------------------------------
AFLR3 IC : INPUT SURFACE GRID CHECK
AFLR3 IC : Nodes, Elements = 73 0
UG3 : Boundary Conditions
UG3 : B-Face ID Boundary Condition
UG3 : 1 Solid
UG3 : 2 Solid
UG3 : 3 Solid
UG3 : 4 Solid
UG3 : 5 Solid
UG3 : 6 Solid
UG3 : 7 Solid
UG3 : 8 Solid
AFLR3 : CPU Time = 0.001 seconds
AFLR3 IG : INITIAL VOLUME GRID GENERATION
AFLR3 IG : Nodes, Elements = 73 0
AFLR3 IG : Nodes, Elements = 8 10
AFLR3 IG : Nodes, Elements = 16 50
AFLR3 IG : Nodes, Elements = 32 139
AFLR3 IG : Nodes, Elements = 48 243
AFLR3 IG : Nodes, Elements = 64 337
AFLR3 IG : Nodes, Elements = 80 423
AFLR3 IG : Nodes, Elements = 80 420
AFLR3 IG : Nodes, Elements = 80 419
AFLR3 IG : Nodes, Elements = 80 415
AFLR3 IG : Nodes, Elements = 73 179
AFLR3 IG : Nodes, Elements = 73 186
AFLR3 IG : Nodes, Elements = 73 173
AFLR3 : CPU Time = 0.003 seconds
AFLR3 GG : ISOTROPIC VOLUME GRID GENERATION
AFLR3 GG : Nodes, Elements = 73 173
AFLR3 : CPU Time = 0.000 seconds
AFLR3 QI : QUALITY IMPROVEMENT
AFLR3 QI : Nodes, Elements = 73 173
AFLR3 QI : Nodes, Elements = 73 182
AFLR3 QI : Nodes, Elements = 73 173
AFLR3 QI : Nodes, Elements = 73 182
AFLR3 QI : Nodes, Elements = 73 173
AFLR3 : CPU Time = 0.001 seconds
AFLR3 : DONE
UG3 : DIHEDRAL ANGLE CHECK
UG3 : No. Tet Elems = 173
UG3 : Min, Max Ang = 11.39 148.6
UG3 : Average Angle = 71.4
UG3 : No. Angle>160.0 = 0
UG3 : No. Angle>179.9 = 0
UG3 : VOL CHECK
UG3 : Total-Volume = 0.888
UG3 : No. Tet Elems = 173
UG3 : Min Vol = 0.000467
UG3 : Average Vol = 0.00513
UG3 : Total-Tet-Vol = 0.888
UG3 : No. Vol<TOL = 0
UG3 : Q VOL-LENGTH-RATIO CHECK
2/3 2
UG3 : Q = c * Vol / sum( L )
UG3 : 0 <= Q <= 1
UG3 : No. Tet Elems = 173
UG3 : Min, Max Q = 0.368 0.837
UG3 : Average Q = 0.575
UG3 : No. Q< 0.1 = 0
UG3 : No. Q< 0.01 = 0
OVERALL : CPU Time = 0.014 seconds
UG3 : DIHEDRAL ANGLE CHECK
UG3 : No. Tet Elems = 173
UG3 : Min, Max Ang = 11.39 148.6
UG3 : Average Angle = 71.4
UG3 : No. Angle>160.0 = 0
UG3 : No. Angle>179.9 = 0
UG3 : VOL CHECK
UG3 : Total-Volume = 0.888
UG3 : No. Tet Elems = 173
UG3 : Min Vol = 0.000467
UG3 : Average Vol = 0.00513
UG3 : Total-Tet-Vol = 0.888
UG3 : No. Vol<TOL = 0
UG3 : Q VOL-LENGTH-RATIO CHECK
2/3 2
UG3 : Q = c * Vol / sum( L )
UG3 : 0 <= Q <= 1
UG3 : Note that L includes scaling for BL-aspect=ratio
UG3 : No. Tet Elems = 173
UG3 : Min, Max Q = 0.571 1
UG3 : Average Q = 0.745
UG3 : No. Q< 0.1 = 0
UG3 : No. Q< 0.01 = 0
UG3 : CPU Time = 0.000 seconds
AFLR43 : INPUT SURFACE MESH FROM TESS
AFLR43 : Quad Surface Faces= 0
AFLR43 : Tria Surface Faces= 284
AFLR43 : Nodes = 142
UG PARAM : SETTING INPUT PARAMETERS FROM ARGUMENT VECTOR
UG PARAM : mrecm = 3
UG PARAM : mrecqm = 3
UG PARAM : mpfrmt = 0
AFLR3 IC : INPUT SURFACE GRID CHECK
AFLR3 IC : Nodes, Elements = 142 0
UG3 : Boundary Conditions
UG3 : B-Face ID Boundary Condition
UG3 : 9 Solid
UG3 : 10 Solid
UG3 : 11 Solid
UG3 : 12 Solid
UG3 : 13 Solid
UG3 : 14 Solid
AFLR3 : CPU Time = 0.001 seconds
AFLR3 IG : INITIAL VOLUME GRID GENERATION
AFLR3 IG : Nodes, Elements = 142 0
AFLR3 IG : Nodes, Elements = 8 10
AFLR3 IG : Nodes, Elements = 30 128
AFLR3 IG : Nodes, Elements = 60 307
AFLR3 IG : Nodes, Elements = 90 495
AFLR3 IG : Nodes, Elements = 120 686
AFLR3 IG : Nodes, Elements = 149 858
AFLR3 IG : Nodes, Elements = 149 860
AFLR3 IG : Nodes, Elements = 142 402
AFLR3 IG : Nodes, Elements = 142 385
AFLR3 : CPU Time = 0.003 seconds
AFLR3 GG : ISOTROPIC VOLUME GRID GENERATION
AFLR3 GG : Nodes, Elements = 142 385
AFLR3 : CPU Time = 0.000 seconds
AFLR3 QI : QUALITY IMPROVEMENT
AFLR3 QI : Nodes, Elements = 142 385
AFLR3 : CPU Time = 0.001 seconds
AFLR3 : DONE
UG3 : DIHEDRAL ANGLE CHECK
UG3 : No. Tet Elems = 385
UG3 : Min, Max Ang = 28.04 132.3
UG3 : Average Angle = 70.8
UG3 : No. Angle>160.0 = 0
UG3 : No. Angle>179.9 = 0
UG3 : VOL CHECK
UG3 : Total-Volume = 0.0844
UG3 : No. Tet Elems = 385
UG3 : Min Vol = 5.89e-05
UG3 : Average Vol = 0.000219
UG3 : Total-Tet-Vol = 0.0844
UG3 : No. Vol<TOL = 0
UG3 : Q VOL-LENGTH-RATIO CHECK
2/3 2
UG3 : Q = c * Vol / sum( L )
UG3 : 0 <= Q <= 1
UG3 : No. Tet Elems = 385
UG3 : Min, Max Q = 0.57 0.922
UG3 : Average Q = 0.763
UG3 : No. Q< 0.1 = 0
UG3 : No. Q< 0.01 = 0
OVERALL : CPU Time = 0.010 seconds
UG3 : DIHEDRAL ANGLE CHECK
UG3 : No. Tet Elems = 385
UG3 : Min, Max Ang = 28.04 132.3
UG3 : Average Angle = 70.8
UG3 : No. Angle>160.0 = 0
UG3 : No. Angle>179.9 = 0
UG3 : VOL CHECK
UG3 : Total-Volume = 0.0844
UG3 : No. Tet Elems = 385
UG3 : Min Vol = 5.89e-05
UG3 : Average Vol = 0.000219
UG3 : Total-Tet-Vol = 0.0844
UG3 : No. Vol<TOL = 0
UG3 : Q VOL-LENGTH-RATIO CHECK
2/3 2
UG3 : Q = c * Vol / sum( L )
UG3 : 0 <= Q <= 1
UG3 : Note that L includes scaling for BL-aspect=ratio
UG3 : No. Tet Elems = 385
UG3 : Min, Max Q = 0.644 1
UG3 : Average Q = 0.842
UG3 : No. Q< 0.1 = 0
UG3 : No. Q< 0.01 = 0
UG3 : CPU Time = 0.000 seconds
AFLR43 : INPUT SURFACE MESH FROM TESS
AFLR43 : Quad Surface Faces= 0
AFLR43 : Tria Surface Faces= 188
AFLR43 : Nodes = 96
UG PARAM : SETTING INPUT PARAMETERS FROM ARGUMENT VECTOR
UG PARAM : mrecm = 3
UG PARAM : mrecqm = 3
UG PARAM : mpfrmt = 0
AFLR3 IC : INPUT SURFACE GRID CHECK
AFLR3 IC : Nodes, Elements = 96 0
UG3 : Boundary Conditions
UG3 : B-Face ID Boundary Condition
UG3 : 15 Solid
UG3 : 16 Solid
UG3 : 17 Solid
UG3 : 18 Solid
AFLR3 : CPU Time = 0.001 seconds
AFLR3 IG : INITIAL VOLUME GRID GENERATION
AFLR3 IG : Nodes, Elements = 96 0
AFLR3 IG : Nodes, Elements = 8 10
AFLR3 IG : Nodes, Elements = 20 72
AFLR3 IG : Nodes, Elements = 40 192
AFLR3 IG : Nodes, Elements = 60 312
AFLR3 IG : Nodes, Elements = 80 438
AFLR3 IG : Nodes, Elements = 100 540
AFLR3 IG : Nodes, Elements = 103 555
AFLR3 IG : Nodes, Elements = 96 238
AFLR3 IG : Nodes, Elements = 96 225
AFLR3 IG : Nodes, Elements = 96 210
AFLR3 : CPU Time = 0.002 seconds
AFLR3 GG : ISOTROPIC VOLUME GRID GENERATION
AFLR3 GG : Nodes, Elements = 96 210
AFLR3 GG : Nodes, Elements = 101 225
AFLR3 GG : Nodes, Elements = 101 232
AFLR3 GG : Nodes, Elements = 101 225
AFLR3 GG : Nodes, Elements = 104 234
AFLR3 GG : Nodes, Elements = 104 243
AFLR3 GG : Nodes, Elements = 104 239
AFLR3 : CPU Time = 0.001 seconds
AFLR3 QI : QUALITY IMPROVEMENT
AFLR3 QI : Nodes, Elements = 104 239
AFLR3 QI : Nodes, Elements = 104 240
AFLR3 QI : Nodes, Elements = 104 239
AFLR3 : CPU Time = 0.000 seconds
AFLR3 : DONE
UG3 : DIHEDRAL ANGLE CHECK
UG3 : No. Tet Elems = 239
UG3 : Min, Max Ang = 20.94 137.8
UG3 : Average Angle = 70.3
UG3 : No. Angle>160.0 = 0
UG3 : No. Angle>179.9 = 0
UG3 : VOL CHECK
UG3 : Total-Volume = 0.0279
UG3 : No. Tet Elems = 239
UG3 : Min Vol = 4.05e-05
UG3 : Average Vol = 0.000117
UG3 : Total-Tet-Vol = 0.0279
UG3 : No. Vol<TOL = 0
UG3 : Q VOL-LENGTH-RATIO CHECK
2/3 2
UG3 : Q = c * Vol / sum( L )
UG3 : 0 <= Q <= 1
UG3 : No. Tet Elems = 239
UG3 : Min, Max Q = 0.564 0.989
UG3 : Average Q = 0.875
UG3 : No. Q< 0.1 = 0
UG3 : No. Q< 0.01 = 0
OVERALL : CPU Time = 0.009 seconds
UG3 : DIHEDRAL ANGLE CHECK
UG3 : No. Tet Elems = 239
UG3 : Min, Max Ang = 20.94 137.8
UG3 : Average Angle = 70.3
UG3 : No. Angle>160.0 = 0
UG3 : No. Angle>179.9 = 0
UG3 : VOL CHECK
UG3 : Total-Volume = 0.0279
UG3 : No. Tet Elems = 239
UG3 : Min Vol = 4.05e-05
UG3 : Average Vol = 0.000117
UG3 : Total-Tet-Vol = 0.0279
UG3 : No. Vol<TOL = 0
UG3 : Q VOL-LENGTH-RATIO CHECK
2/3 2
UG3 : Q = c * Vol / sum( L )
UG3 : 0 <= Q <= 1
UG3 : Note that L includes scaling for BL-aspect=ratio
UG3 : No. Tet Elems = 239
UG3 : Min, Max Q = 0.679 1
UG3 : Average Q = 0.883
UG3 : No. Q< 0.1 = 0
UG3 : No. Q< 0.01 = 0
UG3 : CPU Time = 0.000 seconds
EGADS : ---------------------------------------
EGADS : Engineering Geometry Aircraft Design System
EGADS : Version 1.26
EGADS : OpenCASCADE Version 7.8.0
EGADS : ---------------------------------------
EGADS : CREATE EGADS TESS FROM AFLR3 DATA
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 1
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 2
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 3
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 4
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 5
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 6
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 7
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 8
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 9
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 10
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 11
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 12
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 13
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 14
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 15
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 16
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 17
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 18
EGADS : CREATING TESSELLATION FOR BODY 0 FACE 1
EGADS : CREATING TESSELLATION FOR BODY 0 FACE 2
EGADS : CREATING TESSELLATION FOR BODY 0 FACE 3
EGADS : CREATING TESSELLATION FOR BODY 0 FACE 4
EGADS : CREATING TESSELLATION FOR BODY 0 FACE 5
EGADS : CREATING TESSELLATION FOR BODY 0 FACE 6
EGADS : CREATING TESSELLATION FOR BODY 0 FACE 7
EGADS : CREATING TESSELLATION FOR BODY 0 FACE 8
EGADS : CREATING TESSELLATION FOR BODY 1 EDGE 19
EGADS : CREATING TESSELLATION FOR BODY 1 EDGE 20
EGADS : CREATING TESSELLATION FOR BODY 1 EDGE 21
EGADS : CREATING TESSELLATION FOR BODY 1 EDGE 22
EGADS : CREATING TESSELLATION FOR BODY 1 EDGE 23
EGADS : CREATING TESSELLATION FOR BODY 1 EDGE 24
EGADS : CREATING TESSELLATION FOR BODY 1 EDGE 25
EGADS : CREATING TESSELLATION FOR BODY 1 EDGE 26
EGADS : CREATING TESSELLATION FOR BODY 1 EDGE 27
EGADS : CREATING TESSELLATION FOR BODY 1 EDGE 28
EGADS : CREATING TESSELLATION FOR BODY 1 EDGE 29
EGADS : CREATING TESSELLATION FOR BODY 1 EDGE 30
EGADS : CREATING TESSELLATION FOR BODY 1 FACE 9
EGADS : CREATING TESSELLATION FOR BODY 1 FACE 10
EGADS : CREATING TESSELLATION FOR BODY 1 FACE 11
EGADS : CREATING TESSELLATION FOR BODY 1 FACE 12
EGADS : CREATING TESSELLATION FOR BODY 1 FACE 13
EGADS : CREATING TESSELLATION FOR BODY 1 FACE 14
EGADS : CREATING TESSELLATION FOR BODY 2 EDGE 31
EGADS : CREATING TESSELLATION FOR BODY 2 EDGE 32
EGADS : CREATING TESSELLATION FOR BODY 2 EDGE 33
EGADS : CREATING TESSELLATION FOR BODY 2 EDGE 34
EGADS : CREATING TESSELLATION FOR BODY 2 EDGE 35
EGADS : CREATING TESSELLATION FOR BODY 2 EDGE 36
EGADS : CREATING TESSELLATION FOR BODY 2 FACE 15
EGADS : CREATING TESSELLATION FOR BODY 2 FACE 16
EGADS : CREATING TESSELLATION FOR BODY 2 FACE 17
EGADS : CREATING TESSELLATION FOR BODY 2 FACE 18
EGADS : EGADS TESS CREATED
EGADS : CHECK TESS FACE NODE MAP
EGADS : CHECKING NODE MAP FOR BODY 0 FACE 1
EGADS : CHECKING NODE MAP FOR BODY 0 FACE 2
EGADS : CHECKING NODE MAP FOR BODY 0 FACE 3
EGADS : CHECKING NODE MAP FOR BODY 0 FACE 4
EGADS : CHECKING NODE MAP FOR BODY 0 FACE 5
EGADS : CHECKING NODE MAP FOR BODY 0 FACE 6
EGADS : CHECKING NODE MAP FOR BODY 0 FACE 7
EGADS : CHECKING NODE MAP FOR BODY 0 FACE 8
EGADS : CHECKING NODE MAP FOR BODY 1 FACE 9
EGADS : CHECKING NODE MAP FOR BODY 1 FACE 10
EGADS : CHECKING NODE MAP FOR BODY 1 FACE 11
EGADS : CHECKING NODE MAP FOR BODY 1 FACE 12
EGADS : CHECKING NODE MAP FOR BODY 1 FACE 13
EGADS : CHECKING NODE MAP FOR BODY 1 FACE 14
EGADS : CHECKING NODE MAP FOR BODY 2 FACE 15
EGADS : CHECKING NODE MAP FOR BODY 2 FACE 16
EGADS : CHECKING NODE MAP FOR BODY 2 FACE 17
EGADS : CHECKING NODE MAP FOR BODY 2 FACE 18
Volume mesh:
Number of nodes = 177
Number of elements = 903
Number of triangles = 106
Number of quadrilatarals = 0
Number of tetrahedrals = 797
Number of pyramids = 0
Number of prisms = 0
Number of hexahedrals = 0
Writing vtk file ....
Writing vtk general file ....
Finished writing vtk file
Writing exodus file ....
Block: 'Volume_1_tet', blk_id 1, num_entries 173
Block: 'Volume_2_tet', blk_id 2, num_entries 385
Block: 'Volume_3_tet', blk_id 3, num_entries 239
Sideset: 'box', set_id 1, num_entries 106
Sideset: 'cyl1', set_id 2, num_entries 16
Sideset: 'cyl2', set_id 3, num_entries 28
Finished writing Exodus file
real 0m2.452s
user 0m1.889s
sys 0m0.703s
+ status=0
+ set +x
=================================================
CAPS verification (using pyCAPS) case plato_aflr_cyli_box_PyTest.py passed (as expected)
=================================================
=================================================
+ echo 'plato_aflr_airfoil_morph_PyTest.py test;'
+ tee -a /Users/jenkins/workspace/ESP_MemcheckCaps/7.8/CAPS/STRUCTURE/DARWIN64/ESP/DARWIN64/examples/regressionTest/pyCAPSlog.txt
plato_aflr_airfoil_morph_PyTest.py test;
+ python -u plato_aflr_airfoil_morph_PyTest.py -outLevel=0
+ tee -a /Users/jenkins/workspace/ESP_MemcheckCaps/7.8/CAPS/STRUCTURE/DARWIN64/ESP/DARWIN64/examples/regressionTest/pyCAPSlog.txt
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 5
Name = 2DSlice, index = 1
Name = TunnelWall, index = 2
Name = OutFlow, index = 3
Name = InFlow, index = 4
Name = Airfoil, index = 5
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 4
Name = TunnelWall, index = 1
Name = OutFlow, index = 2
Name = InFlow, index = 3
Name = Airfoil, index = 4
Getting 2D mesh for body 1 (of 1)
AFLR2 : ---------------------------------------
AFLR2 : AFLR2 LIBRARY
AFLR2 : ADVANCING-FRONT/LOCAL-RECONNECTION
AFLR2 : TRIA/QUAD GRID GENERATOR
AFLR2 : Version Number 9.17.15
AFLR2 : Version Date 04/23/24 @ 12:51AM
AFLR2 : Compile OS Darwin 23.4.0 x86_64
AFLR2 : Compile Date 04/23/24 @ 11:49AM
AFLR2 : Copyright 1994-2021, D.L. Marcum
AFLR2 : ---------------------------------------
AFLR2 IC : INPUT DATA CHECK
AFLR2 IC : Nodes, Faces = 420 0
AFLR2 : CPU Time = 0.000 seconds
AFLR2 EG : EDGE GRID RE-GENERATION
AFLR2 EG : Nodes, Edges = 420 420
AFLR2 : CPU Time = 0.000 seconds
AFLR2 IG : INITIAL GRID GENERATION
AFLR2 IG : Nodes, Faces = 0 2
AFLR2 IG : Nodes, Faces = 84 170
AFLR2 IG : Nodes, Faces = 168 338
AFLR2 IG : Nodes, Faces = 252 506
AFLR2 IG : Nodes, Faces = 336 674
AFLR2 IG : Nodes, Faces = 344 690
AFLR2 IG : Nodes, Faces = 345 692
AFLR2 IG : Nodes, Faces = 420 842
AFLR2 IG : Nodes, Faces = 424 842
AFLR2 IG : Nodes, Faces = 420 420
AFLR2 : CPU Time = 0.001 seconds
AFLR2 GG : FIELD GRID GENERATION
AFLR2 GG : Nodes, Faces = 420 420
AFLR2 GG : Nodes, Faces = 832 1244
AFLR2 GG : Nodes, Faces = 1237 2054
AFLR2 GG : Nodes, Faces = 1634 2848
AFLR2 GG : Nodes, Faces = 2032 3644
AFLR2 GG : Nodes, Faces = 2422 4424
AFLR2 GG : Nodes, Faces = 2801 5182
AFLR2 GG : Nodes, Faces = 3177 5934
AFLR2 GG : Nodes, Faces = 3550 6680
AFLR2 GG : Nodes, Faces = 3915 7410
AFLR2 GG : Nodes, Faces = 4276 8132
AFLR2 GG : Nodes, Faces = 4630 8840
AFLR2 GG : Nodes, Faces = 4978 9536
AFLR2 GG : Nodes, Faces = 5320 10220
AFLR2 GG : Nodes, Faces = 5657 10894
AFLR2 GG : Nodes, Faces = 5984 11548
AFLR2 GG : Nodes, Faces = 6308 12196
AFLR2 GG : Nodes, Faces = 6626 12832
AFLR2 GG : Nodes, Faces = 6946 13472
AFLR2 GG : Nodes, Faces = 7256 14092
AFLR2 GG : Nodes, Faces = 7561 14702
AFLR2 GG : Nodes, Faces = 7855 15290
AFLR2 GG : Nodes, Faces = 8141 15862
AFLR2 GG : Nodes, Faces = 8421 16422
AFLR2 GG : Nodes, Faces = 8695 16970
AFLR2 GG : Nodes, Faces = 8967 17514
AFLR2 GG : Nodes, Faces = 9220 18020
AFLR2 GG : Nodes, Faces = 9475 18530
AFLR2 GG : Nodes, Faces = 9726 19032
AFLR2 GG : Nodes, Faces = 9971 19522
AFLR2 GG : Nodes, Faces = 10170 19920
AFLR2 GG : Nodes, Faces = 10351 20282
AFLR2 GG : Nodes, Faces = 10525 20630
AFLR2 GG : Nodes, Faces = 10695 20970
AFLR2 GG : Nodes, Faces = 10864 21308
AFLR2 GG : Nodes, Faces = 11038 21656
AFLR2 GG : Nodes, Faces = 11205 21990
AFLR2 GG : Nodes, Faces = 11358 22296
AFLR2 GG : Nodes, Faces = 11490 22560
AFLR2 GG : Nodes, Faces = 11598 22776
AFLR2 GG : Nodes, Faces = 11695 22970
AFLR2 GG : Nodes, Faces = 11776 23132
AFLR2 GG : Nodes, Faces = 11847 23274
AFLR2 GG : Nodes, Faces = 11913 23406
AFLR2 GG : Nodes, Faces = 11970 23520
AFLR2 GG : Nodes, Faces = 12021 23622
AFLR2 GG : Nodes, Faces = 12074 23728
AFLR2 GG : Nodes, Faces = 12116 23812
AFLR2 GG : Nodes, Faces = 12157 23894
AFLR2 GG : Nodes, Faces = 12188 23956
AFLR2 GG : Nodes, Faces = 12212 24004
AFLR2 GG : Nodes, Faces = 12232 24044
AFLR2 GG : Nodes, Faces = 12242 24064
AFLR2 GG : Nodes, Faces = 12244 24068
AFLR2 : CPU Time = 0.024 seconds
AFLR2 QI : QUALITY IMPROVEMENT
AFLR2 QI : Nodes, Faces = 12244 24068
AFLR2 : CPU Time = 0.004 seconds
AFLR2 : DONE
Writing AFLR3 file ....
Finished writing AFLR3 file
Number of nodes = 12244
Number of elements = 24488
Number of tris = 24068
Number of quad = 0
Writing exodus file ....
Exodus expects 2D meshes in the x-y plane... attempting to rotate mesh!
Swapping z and y coordinates!
Block: 'Block1_tri', blk_id 1, num_entries 24068
Sideset: 'Airfoil', set_id 1, num_entries 36
Sideset: 'InFlow', set_id 2, num_entries 64
Sideset: 'OutFlow', set_id 3, num_entries 64
Sideset: 'TunnelWall', set_id 4, num_entries 256
Finished writing Exodus file
Projecting tessellation 1 (of 1) on to new body
real 0m2.435s
user 0m2.395s
sys 0m1.060s
+ status=0
+ set +x
=================================================
CAPS verification (using pyCAPS) case plato_aflr_airfoil_morph_PyTest.py passed (as expected)
=================================================
=================================================
+ echo 'plato_tetgen_table_PyTest.py test;'
+ tee -a /Users/jenkins/workspace/ESP_MemcheckCaps/7.8/CAPS/STRUCTURE/DARWIN64/ESP/DARWIN64/examples/regressionTest/pyCAPSlog.txt
plato_tetgen_table_PyTest.py test;
+ python -u plato_tetgen_table_PyTest.py -outLevel=0
+ tee -a /Users/jenkins/workspace/ESP_MemcheckCaps/7.8/CAPS/STRUCTURE/DARWIN64/ESP/DARWIN64/examples/regressionTest/pyCAPSlog.txt
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 5
Name = tableTopSide, index = 1
Name = leg0Side, index = 2
Name = leg1Side, index = 3
Name = leg2Side, index = 4
Name = leg3Side, index = 5
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 0
Getting surface mesh for body 1 (of 5)
Getting surface mesh for body 2 (of 5)
Getting surface mesh for body 3 (of 5)
Getting surface mesh for body 4 (of 5)
Getting surface mesh for body 5 (of 5)
Body 1 (of 5)
Number of nodes = 642
Number of elements = 1280
Number of triangle elements = 1280
Number of quadrilateral elements = 0
Body 2 (of 5)
Number of nodes = 1066
Number of elements = 2128
Number of triangle elements = 2128
Number of quadrilateral elements = 0
Body 3 (of 5)
Number of nodes = 1066
Number of elements = 2128
Number of triangle elements = 2128
Number of quadrilateral elements = 0
Body 4 (of 5)
Number of nodes = 1066
Number of elements = 2128
Number of triangle elements = 2128
Number of quadrilateral elements = 0
Body 5 (of 5)
Number of nodes = 1066
Number of elements = 2128
Number of triangle elements = 2128
Number of quadrilateral elements = 0
----------------------------
Total number of nodes = 4906
Total number of elements = 9792
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 5
Name = tableTopSide, index = 1
Name = leg0Side, index = 2
Name = leg1Side, index = 3
Name = leg2Side, index = 4
Name = leg3Side, index = 5
Body 1 number of surface: nodes - 642, elements - 1280
Body 2 number of surface: nodes - 1066, elements - 2128
Body 3 number of surface: nodes - 1066, elements - 2128
Body 4 number of surface: nodes - 1066, elements - 2128
Body 5 number of surface: nodes - 1066, elements - 2128
Getting volume mesh
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.030234
Creating surface mesh ...
Surface mesh seconds: 0.002894
Recovering boundaries...
Boundary recovery seconds: 0.009821
Removing exterior tetrahedra ...
Spreading region attributes.
Exterior tets removal seconds: 0.000856
Recovering Delaunayness...
Delaunay recovery seconds: 0.008659
Refining mesh...
Refinement seconds: 0.001612
Improving mesh...
Mesh improvement seconds: 0.001479
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.000536
Total running seconds: 0.05672
Statistics:
Input points: 642
Input facets: 1280
Input segments: 1920
Input holes: 0
Input regions: 1
Mesh points: 642
Mesh tetrahedra: 1722
Mesh faces: 4084
Mesh faces on exterior boundary: 1280
Mesh faces on input facets: 1280
Mesh edges on input segments: 1920
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.173286
Creating surface mesh ...
Surface mesh seconds: 0.004665
Recovering boundaries...
Boundary recovery seconds: 0.015258
Removing exterior tetrahedra ...
Warning: The 1-th region point lies outside the convex hull.
Spreading region attributes.
Exterior tets removal seconds: 0.004235
Recovering Delaunayness...
Delaunay recovery seconds: 0.052097
Refining mesh...
Refinement seconds: 0.14837
Smoothing vertices...
Mesh smoothing seconds: 0.130903
Improving mesh...
Mesh improvement seconds: 0.004906
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.00121
Total running seconds: 0.535518
Statistics:
Input points: 1066
Input facets: 2128
Input segments: 3192
Input holes: 0
Input regions: 2
Mesh points: 1307
Mesh tetrahedra: 4393
Mesh faces: 9850
Mesh faces on exterior boundary: 2128
Mesh faces on input facets: 2128
Mesh edges on input segments: 3192
Steiner points inside domain: 241
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.172043
Creating surface mesh ...
Surface mesh seconds: 0.005054
Recovering boundaries...
Boundary recovery seconds: 0.011828
Removing exterior tetrahedra ...
Warning: The 1-th region point lies outside the convex hull.
Warning: The 2-th region point lies outside the convex hull.
Spreading region attributes.
Exterior tets removal seconds: 0.003631
Recovering Delaunayness...
Delaunay recovery seconds: 0.050197
Refining mesh...
Refinement seconds: 0.148518
Smoothing vertices...
Mesh smoothing seconds: 0.127697
Improving mesh...
Mesh improvement seconds: 0.003643
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.001002
Total running seconds: 0.52428
Statistics:
Input points: 1066
Input facets: 2128
Input segments: 3192
Input holes: 0
Input regions: 3
Mesh points: 1302
Mesh tetrahedra: 4374
Mesh faces: 9812
Mesh faces on exterior boundary: 2128
Mesh faces on input facets: 2128
Mesh edges on input segments: 3192
Steiner points inside domain: 236
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.169441
Creating surface mesh ...
Surface mesh seconds: 0.003368
Recovering boundaries...
Boundary recovery seconds: 0.014046
Removing exterior tetrahedra ...
Warning: The 1-th region point lies outside the convex hull.
Warning: The 2-th region point lies outside the convex hull.
Warning: The 3-th region point lies outside the convex hull.
Spreading region attributes.
Exterior tets removal seconds: 0.003357
Recovering Delaunayness...
Delaunay recovery seconds: 0.052212
Refining mesh...
Refinement seconds: 0.164689
Smoothing vertices...
Mesh smoothing seconds: 0.12995
Improving mesh...
Mesh improvement seconds: 0.004711
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.001146
Total running seconds: 0.543598
Statistics:
Input points: 1066
Input facets: 2128
Input segments: 3192
Input holes: 0
Input regions: 4
Mesh points: 1313
Mesh tetrahedra: 4448
Mesh faces: 9960
Mesh faces on exterior boundary: 2128
Mesh faces on input facets: 2128
Mesh edges on input segments: 3192
Steiner points inside domain: 247
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.17508
Creating surface mesh ...
Surface mesh seconds: 0.004935
Recovering boundaries...
Boundary recovery seconds: 0.013455
Removing exterior tetrahedra ...
Warning: The 1-th region point lies outside the convex hull.
Warning: The 2-th region point lies outside the convex hull.
Warning: The 3-th region point lies outside the convex hull.
Warning: The 4-th region point lies outside the convex hull.
Spreading region attributes.
Exterior tets removal seconds: 0.003454
Recovering Delaunayness...
Delaunay recovery seconds: 0.054713
Refining mesh...
Refinement seconds: 0.155534
Smoothing vertices...
Mesh smoothing seconds: 0.125693
Improving mesh...
Mesh improvement seconds: 0.004035
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.000896
Total running seconds: 0.538328
Statistics:
Input points: 1066
Input facets: 2128
Input segments: 3192
Input holes: 0
Input regions: 5
Mesh points: 1306
Mesh tetrahedra: 4416
Mesh faces: 9896
Mesh faces on exterior boundary: 2128
Mesh faces on input facets: 2128
Mesh edges on input segments: 3192
Steiner points inside domain: 240
Done meshing using TetGen!
Writing vtk file ....
Writing vtk general file ....
Finished writing vtk file
Writing exodus file ....
Block: 'tableTop_tet', blk_id 1, num_entries 1722
Block: 'leg0_tet', blk_id 2, num_entries 4393
Block: 'leg1_tet', blk_id 3, num_entries 4374
Block: 'leg2_tet', blk_id 4, num_entries 4448
Block: 'leg3_tet', blk_id 5, num_entries 4416
Sideset: 'leg0Side', set_id 1, num_entries 2128
Sideset: 'leg1Side', set_id 2, num_entries 2128
Sideset: 'leg2Side', set_id 3, num_entries 2128
Sideset: 'leg3Side', set_id 4, num_entries 2128
Sideset: 'tableTopSide', set_id 5, num_entries 1280
Nodeset: 'edge', set_id 1, num_entries 17
Nodeset: 'face1', set_id 2, num_entries 99
Nodeset: 'face2', set_id 3, num_entries 99
Nodeset: 'node', set_id 4, num_entries 1
Finished writing Exodus file
real 0m5.620s
user 0m4.588s
sys 0m0.659s
+ status=0
+ set +x
=================================================
CAPS verification (using pyCAPS) case plato_tetgen_table_PyTest.py passed (as expected)
=================================================
=================================================
+ echo 'plato_tetgen_cyli_box_PyTest.py test;'
+ tee -a /Users/jenkins/workspace/ESP_MemcheckCaps/7.8/CAPS/STRUCTURE/DARWIN64/ESP/DARWIN64/examples/regressionTest/pyCAPSlog.txt
plato_tetgen_cyli_box_PyTest.py test;
+ python -u plato_tetgen_cyli_box_PyTest.py -outLevel=0
+ tee -a /Users/jenkins/workspace/ESP_MemcheckCaps/7.8/CAPS/STRUCTURE/DARWIN64/ESP/DARWIN64/examples/regressionTest/pyCAPSlog.txt
EGADS Warning: Loop 2 marked with -1
EGADS Warning: Loop 2 marked with -1
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 5
Name = box, index = 1
Name = cyl2, index = 2
Name = box;cyl2, index = 3
Name = cyl1, index = 4
Name = cyl1;box;cyl2, index = 5
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 0
Getting surface mesh for body 1 (of 1)
Body 1 (of 1)
Number of nodes = 3600
Number of elements = 7324
Number of triangle elements = 7324
Number of quadrilateral elements = 0
----------------------------
Total number of nodes = 3600
Total number of elements = 7324
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 5
Name = box, index = 1
Name = cyl2, index = 2
Name = box;cyl2, index = 3
Name = cyl1, index = 4
Name = cyl1;box;cyl2, index = 5
Number of surface: nodes - 3600, elements - 7324
Getting volume mesh
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.386109
Creating surface mesh ...
Surface mesh seconds: 0.015007
Recovering boundaries...
Boundary recovery seconds: 0.067486
Removing exterior tetrahedra ...
Warning: The 3-th region point lies outside the convex hull.
Spreading region attributes.
Exterior tets removal seconds: 0.007563
Recovering Delaunayness...
Delaunay recovery seconds: 0.314594
Refining mesh...
Refinement seconds: 0.6028
Smoothing vertices...
Mesh smoothing seconds: 0.755019
Improving mesh...
Mesh improvement seconds: 0.031087
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.004605
Total running seconds: 2.18537
Statistics:
Input points: 3600
Input facets: 7324
Input segments: 10922
Input holes: 0
Input regions: 3
Mesh points: 5637
Mesh tetrahedra: 29545
Mesh faces: 60704
Mesh faces on exterior boundary: 3228
Mesh faces on input facets: 7324
Mesh edges on input segments: 10922
Steiner points inside domain: 2037
Done meshing using TetGen!
Writing vtk file ....
Writing vtk general file ....
Finished writing vtk file
Writing exodus file ....
Block: 'c_tet', blk_id 1, num_entries 12826
Block: 'b_tet', blk_id 2, num_entries 11151
Block: 'a_tet', blk_id 3, num_entries 5568
Sideset: 'box', set_id 1, num_entries 3228
Sideset: 'cyl1', set_id 2, num_entries 2120
Sideset: 'cyl2', set_id 3, num_entries 2314
Finished writing Exodus file
real 0m5.291s
user 0m4.806s
sys 0m0.697s
+ status=0
+ set +x
=================================================
CAPS verification (using pyCAPS) case plato_tetgen_cyli_box_PyTest.py passed (as expected)
=================================================
=================================================
+ echo 'plato_aflr_tetgen_table_PyTest.py test;'
+ tee -a /Users/jenkins/workspace/ESP_MemcheckCaps/7.8/CAPS/STRUCTURE/DARWIN64/ESP/DARWIN64/examples/regressionTest/pyCAPSlog.txt
plato_aflr_tetgen_table_PyTest.py test;
+ python -u plato_aflr_tetgen_table_PyTest.py -outLevel=0
+ tee -a /Users/jenkins/workspace/ESP_MemcheckCaps/7.8/CAPS/STRUCTURE/DARWIN64/ESP/DARWIN64/examples/regressionTest/pyCAPSlog.txt
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 5
Name = tableTopSide, index = 1
Name = leg0Side, index = 2
Name = leg1Side, index = 3
Name = leg2Side, index = 4
Name = leg3Side, index = 5
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 0
AFLR2 : ---------------------------------------
AFLR2 : AFLR2 LIBRARY
AFLR2 : ADVANCING-FRONT/LOCAL-RECONNECTION
AFLR2 : TRIA/QUAD GRID GENERATOR
AFLR2 : Version Number 9.17.15
AFLR2 : Version Date 04/23/24 @ 12:51AM
AFLR2 : Compile OS Darwin 23.4.0 x86_64
AFLR2 : Compile Date 04/23/24 @ 11:49AM
AFLR2 : Copyright 1994-2021, D.L. Marcum
AFLR2 : ---------------------------------------
AFLR4 : ---------------------------------------
AFLR4 : AFLR4 LIBRARY
AFLR4 : ADVANCING-FRONT/LOCAL-RECONNECTION
AFLR4 : TRIA/QUAD SURFACE GRID GENERATOR
AFLR4 : Version Number 11.5.14
AFLR4 : Version Date 04/18/24 @ 12:45PM
AFLR4 : Compile OS Darwin 23.4.0 x86_64
AFLR4 : Compile Date 04/23/24 @ 11:49AM
AFLR4 : Copyright 1994-2021, D.L. Marcum
AFLR4 : ---------------------------------------
EGADS : ---------------------------------------
EGADS : Engineering Geometry Aircraft Design System
EGADS : Version 1.26
EGADS : OpenCASCADE Version 7.8.0
EGADS : ---------------------------------------
EGADS : EGADS CAD Geometry Setup
EGADS : Model has 5 Active Bodies
EGADS : Body 0 is a SolidBody
EGADS : Body 0 has 1 Shells
EGADS : Body 0 has 6 Faces
EGADS : Body 0 has 12 Edges
EGADS : Body 0 has 6 Loops
EGADS : Body 0 has 8 Nodes
EGADS : Body 1 is a SolidBody
EGADS : Body 1 has 1 Shells
EGADS : Body 1 has 4 Faces
EGADS : Body 1 has 6 Edges
EGADS : Body 1 has 4 Loops
EGADS : Body 1 has 4 Nodes
EGADS : Body 2 is a SolidBody
EGADS : Body 2 has 1 Shells
EGADS : Body 2 has 4 Faces
EGADS : Body 2 has 6 Edges
EGADS : Body 2 has 4 Loops
EGADS : Body 2 has 4 Nodes
EGADS : Body 3 is a SolidBody
EGADS : Body 3 has 1 Shells
EGADS : Body 3 has 4 Faces
EGADS : Body 3 has 6 Edges
EGADS : Body 3 has 4 Loops
EGADS : Body 3 has 4 Nodes
EGADS : Body 4 is a SolidBody
EGADS : Body 4 has 1 Shells
EGADS : Body 4 has 4 Faces
EGADS : Body 4 has 6 Edges
EGADS : Body 4 has 4 Loops
EGADS : Body 4 has 4 Nodes
EGADS : Check Grid BCs
EGADS : Grid BCs are OK
EGADS : Face Neighbor-Faces Information
EGADS : QC = Face Quad Combination Flag
EGADS : IER = Face Isolated Edge Refinement Flag
EGADS : ER = Face Edge Refinement Factor
EGADS : Not applicable for Faces with a FarField Grid BC.
EGADS : SF = Face Scale Factor
EGADS : Not applicable for Faces with a FarField Grid BC.
EGADS : Face Body QC IER ER Scale Neighbor
EGADS : ID Active ID Flag Flag Weight Factor Faces
EGADS : 1 Yes 0 0 1 0 1 3 4 5 6
EGADS : 2 Yes 0 0 1 0 1 3 4 5 6
EGADS : 3 Yes 0 0 1 0 1 1 2 5 6
EGADS : 4 Yes 0 0 1 0 1 1 2 5 6
EGADS : 5 Yes 0 0 1 0 1 1 2 3 4
EGADS : 6 Yes 0 0 1 0 1 1 2 3 4
EGADS : 7 Yes 1 0 1 0 1 8 9 10
EGADS : 8 Yes 1 0 1 0 1 7 9 10
EGADS : 9 Yes 1 0 1 0 1 7 8
EGADS : 10 Yes 1 0 1 0 1 7 8
EGADS : 11 Yes 2 0 1 0 1 12 13 14
EGADS : 12 Yes 2 0 1 0 1 11 13 14
EGADS : 13 Yes 2 0 1 0 1 11 12
EGADS : 14 Yes 2 0 1 0 1 11 12
EGADS : 15 Yes 3 0 1 0 1 16 17 18
EGADS : 16 Yes 3 0 1 0 1 15 17 18
EGADS : 17 Yes 3 0 1 0 1 15 16
EGADS : 18 Yes 3 0 1 0 1 15 16
EGADS : 19 Yes 4 0 1 0 1 20 21 22
EGADS : 20 Yes 4 0 1 0 1 19 21 22
EGADS : 21 Yes 4 0 1 0 1 19 20
EGADS : 22 Yes 4 0 1 0 1 19 20
EGADS : Face Edges Information
EGADS : Face Edges
EGADS : 1 1 2 -3 -4
EGADS : 2 -5 8 7 -6
EGADS : 3 9 5 -10 -1
EGADS : 4 -11 3 12 -7
EGADS : 5 4 11 -8 -9
EGADS : 6 -2 10 6 -12
EGADS : 7 -13 -14 15 16
EGADS : 8 17 14 -18 -16
EGADS : 9 13 18
EGADS : 10 -15 -17
EGADS : 11 -19 -20 21 22
EGADS : 12 23 20 -24 -22
EGADS : 13 19 24
EGADS : 14 -21 -23
EGADS : 15 -25 -26 27 28
EGADS : 16 29 26 -30 -28
EGADS : 17 25 30
EGADS : 18 -27 -29
EGADS : 19 -31 -32 33 34
EGADS : 20 35 32 -36 -34
EGADS : 21 31 36
EGADS : 22 -33 -35
EGADS : Face Loops Information
EGADS : Face Loops
EGADS : 1 1
EGADS : 2 2
EGADS : 3 3
EGADS : 4 4
EGADS : 5 5
EGADS : 6 6
EGADS : 7 7
EGADS : 8 8
EGADS : 9 9
EGADS : 10 10
EGADS : 11 11
EGADS : 12 12
EGADS : 13 13
EGADS : 14 14
EGADS : 15 15
EGADS : 16 16
EGADS : 17 17
EGADS : 18 18
EGADS : 19 19
EGADS : 20 20
EGADS : 21 21
EGADS : 22 22
EGADS : Loop Edges Information
EGADS : Loop Active Edges
EGADS : 1 Yes 1 2 -3 -4
EGADS : 2 Yes -5 8 7 -6
EGADS : 3 Yes 9 5 -10 -1
EGADS : 4 Yes -11 3 12 -7
EGADS : 5 Yes 4 11 -8 -9
EGADS : 6 Yes -2 10 6 -12
EGADS : 7 Yes -13 -14 15 16
EGADS : 8 Yes 17 14 -18 -16
EGADS : 9 Yes 13 18
EGADS : 10 Yes -15 -17
EGADS : 11 Yes -19 -20 21 22
EGADS : 12 Yes 23 20 -24 -22
EGADS : 13 Yes 19 24
EGADS : 14 Yes -21 -23
EGADS : 15 Yes -25 -26 27 28
EGADS : 16 Yes 29 26 -30 -28
EGADS : 17 Yes 25 30
EGADS : 18 Yes -27 -29
EGADS : 19 Yes -31 -32 33 34
EGADS : 20 Yes 35 32 -36 -34
EGADS : 21 Yes 31 36
EGADS : 22 Yes -33 -35
EGADS : Edge Node, Scale Factor, and Neighbor-Faces Information
EGADS : ESF = Edge Scale Factor
EGADS : Not applicable for DEGENERATE Edges or Edges with a FarField
EGADS : Grid BC Neighbor Face.
EGADS : Neighbor
EGADS : Edge Body Active Node1 Node2 ESF Faces
EGADS : 1 0 Yes 2 1 1 1 3
EGADS : 2 0 Yes 1 3 1 1 6
EGADS : 3 0 Yes 4 3 1 1 4
EGADS : 4 0 Yes 2 4 1 1 5
EGADS : 5 0 Yes 6 5 1 2 3
EGADS : 6 0 Yes 5 7 1 2 6
EGADS : 7 0 Yes 8 7 1 2 4
EGADS : 8 0 Yes 6 8 1 2 5
EGADS : 9 0 Yes 2 6 1 3 5
EGADS : 10 0 Yes 1 5 1 3 6
EGADS : 11 0 Yes 4 8 1 4 5
EGADS : 12 0 Yes 3 7 1 4 6
EGADS : 13 1 Yes 10 9 1 7 9
EGADS : 14 1 Yes 11 10 1 7 8
EGADS : 15 1 Yes 11 12 1 7 10
EGADS : 16 1 Yes 12 9 1 7 8
EGADS : 17 1 Yes 12 11 1 8 10
EGADS : 18 1 Yes 9 10 1 8 9
EGADS : 19 2 Yes 14 13 1 11 13
EGADS : 20 2 Yes 15 14 1 11 12
EGADS : 21 2 Yes 15 16 1 11 14
EGADS : 22 2 Yes 16 13 1 11 12
EGADS : 23 2 Yes 16 15 1 12 14
EGADS : 24 2 Yes 13 14 1 12 13
EGADS : 25 3 Yes 18 17 1 15 17
EGADS : 26 3 Yes 19 18 1 15 16
EGADS : 27 3 Yes 19 20 1 15 18
EGADS : 28 3 Yes 20 17 1 15 16
EGADS : 29 3 Yes 20 19 1 16 18
EGADS : 30 3 Yes 17 18 1 16 17
EGADS : 31 4 Yes 22 21 1 19 21
EGADS : 32 4 Yes 23 22 1 19 20
EGADS : 33 4 Yes 23 24 1 19 22
EGADS : 34 4 Yes 24 21 1 19 20
EGADS : 35 4 Yes 24 23 1 20 22
EGADS : 36 4 Yes 21 22 1 20 21
EGADS : Node Information
EGADS : Node Active Coordinates
EGADS : 1 Yes 0 0 0.5
EGADS : 2 Yes 0 0 0
EGADS : 3 Yes 0 0.1 0.5
EGADS : 4 Yes 0 0.1 0
EGADS : 5 Yes 0.5 0 0.5
EGADS : 6 Yes 0.5 0 0
EGADS : 7 Yes 0.5 0.1 0.5
EGADS : 8 Yes 0.5 0.1 0
EGADS : 9 Yes 0 0 0
EGADS : 10 Yes 0 0 0
EGADS : 11 Yes 0 0 0
EGADS : 12 Yes 0 0 0
EGADS : 13 Yes 0 0 0.26
EGADS : 14 Yes 0 0 0.46
EGADS : 15 Yes 0 0 0.46
EGADS : 16 Yes 0 0 0.26
EGADS : 17 Yes 0.36 0 0.26
EGADS : 18 Yes 0.36 0 0.46
EGADS : 19 Yes 0.36 0 0.46
EGADS : 20 Yes 0.36 0 0.26
EGADS : 21 Yes 0.36 0 0
EGADS : 22 Yes 0.36 0 0
EGADS : 23 Yes 0.36 0 0
EGADS : 24 Yes 0.36 0 0
EGADS : Face and Edge Match Information
EGADS : No Face Matches Found
AFLR4 : Surface Mesh Spacing Setup
AFLR4 : Max Bounding Box Length = 1
AFLR4 : Min Bounding Box Length = 0.7
AFLR4 : Max Ref Bounding Box Length = 1
AFLR4 : Min Ref Bounding Box Length = 0.7
AFLR4 : Reference Length = 1
AFLR4 : BL Thickness = 0
AFLR4 : Abs Min Surf Spacing = 0.0025
AFLR4 : Min Surf Spacing = 0.005
AFLR4 : Max Surf Spacing = 0.1
AFLR4 : Global Scale Factor = 1
AFLR4 : Geometry Definition Information
AFLR4 : Definition Definition Composite Grid BC
AFLR4 : ID Type ID Type
AFLR4 : 0 glue-only composite - -
AFLR4 : 1 CAD geometry 0 STD w/BL
AFLR4 : 2 CAD geometry 0 STD w/BL
AFLR4 : 3 CAD geometry 0 STD w/BL
AFLR4 : 4 CAD geometry 0 STD w/BL
AFLR4 : 5 CAD geometry 0 STD w/BL
AFLR4 : 6 CAD geometry 0 STD w/BL
AFLR4 : 7 CAD geometry 0 STD w/BL
AFLR4 : 8 CAD geometry 0 STD w/BL
AFLR4 : 9 CAD geometry 0 STD w/BL
AFLR4 : 10 CAD geometry 0 STD w/BL
AFLR4 : 11 CAD geometry 0 STD w/BL
AFLR4 : 12 CAD geometry 0 STD w/BL
AFLR4 : 13 CAD geometry 0 STD w/BL
AFLR4 : 14 CAD geometry 0 STD w/BL
AFLR4 : 15 CAD geometry 0 STD w/BL
AFLR4 : 16 CAD geometry 0 STD w/BL
AFLR4 : 17 CAD geometry 0 STD w/BL
AFLR4 : 18 CAD geometry 0 STD w/BL
AFLR4 : 19 CAD geometry 0 STD w/BL
AFLR4 : 20 CAD geometry 0 STD w/BL
AFLR4 : 21 CAD geometry 0 STD w/BL
AFLR4 : 22 CAD geometry 0 STD w/BL
AFLR4 : Case has 5 Proximity Checking Components
AFLR4 : Component 1 includes Definitions 1 2 3 4 5 6
AFLR4 : Component 2 includes Definitions 7 8 9 10
AFLR4 : Component 3 includes Definitions 11 12 13 14
AFLR4 : Component 4 includes Definitions 15 16 17 18
AFLR4 : Component 5 includes Definitions 19 20 21 22
AFLR4 : Define CAD surface definition 1
AFLR4 : Define CAD surface definition 2
AFLR4 : Define CAD surface definition 3
AFLR4 : Define CAD surface definition 4
AFLR4 : Define CAD surface definition 5
AFLR4 : Define CAD surface definition 6
AFLR4 : Define CAD surface definition 7
AFLR4 : Define CAD surface definition 8
AFLR4 : Define CAD surface definition 9
AFLR4 : Define CAD surface definition 10
AFLR4 : Define CAD surface definition 11
AFLR4 : Define CAD surface definition 12
AFLR4 : Define CAD surface definition 13
AFLR4 : Define CAD surface definition 14
AFLR4 : Define CAD surface definition 15
AFLR4 : Define CAD surface definition 16
AFLR4 : Define CAD surface definition 17
AFLR4 : Define CAD surface definition 18
AFLR4 : Define CAD surface definition 19
AFLR4 : Define CAD surface definition 20
AFLR4 : Define CAD surface definition 21
AFLR4 : Define CAD surface definition 22
AFLR4 : Surface Grid Generation
AFLR4 : Generate optimal mesh on surface definition 1
AFLR2 : Nodes, Trias,Quads= 49 64 0
AFLR4 : Nodes, Trias,Quads= 34 34 0
AFLR4 : Generate optimal mesh on surface definition 2
AFLR2 : Nodes, Trias,Quads= 49 64 0
AFLR4 : Nodes, Trias,Quads= 34 34 0
AFLR4 : Generate optimal mesh on surface definition 3
AFLR2 : Nodes, Trias,Quads= 229 400 0
AFLR4 : Nodes, Trias,Quads= 212 366 0
AFLR4 : Generate optimal mesh on surface definition 4
AFLR2 : Nodes, Trias,Quads= 230 402 0
AFLR4 : Nodes, Trias,Quads= 212 366 0
AFLR4 : Generate optimal mesh on surface definition 5
AFLR2 : Nodes, Trias,Quads= 49 64 0
AFLR4 : Nodes, Trias,Quads= 34 34 0
AFLR4 : Generate optimal mesh on surface definition 6
AFLR2 : Nodes, Trias,Quads= 49 64 0
AFLR4 : Nodes, Trias,Quads= 34 34 0
AFLR4 : Generate optimal mesh on surface definition 7
AFLR2 : Nodes, Trias,Quads= 2270 4354 0
AFLR4 : Nodes, Trias,Quads= 2258 4330 0
AFLR4 : Generate optimal mesh on surface definition 8
AFLR2 : Nodes, Trias,Quads= 2270 4354 0
AFLR4 : Nodes, Trias,Quads= 2259 4332 0
AFLR4 : Generate optimal mesh on surface definition 9
AFLR2 : Nodes, Trias,Quads= 515 964 0
AFLR4 : Nodes, Trias,Quads= 413 760 0
AFLR4 : Generate optimal mesh on surface definition 10
AFLR2 : Nodes, Trias,Quads= 504 942 0
AFLR4 : Nodes, Trias,Quads= 402 738 0
AFLR4 : Generate optimal mesh on surface definition 11
AFLR2 : Nodes, Trias,Quads= 2270 4354 0
AFLR4 : Nodes, Trias,Quads= 2258 4330 0
AFLR4 : Generate optimal mesh on surface definition 12
AFLR2 : Nodes, Trias,Quads= 2270 4354 0
AFLR4 : Nodes, Trias,Quads= 2259 4332 0
AFLR4 : Generate optimal mesh on surface definition 13
AFLR2 : Nodes, Trias,Quads= 515 964 0
AFLR4 : Nodes, Trias,Quads= 413 760 0
AFLR4 : Generate optimal mesh on surface definition 14
AFLR2 : Nodes, Trias,Quads= 504 942 0
AFLR4 : Nodes, Trias,Quads= 402 738 0
AFLR4 : Generate optimal mesh on surface definition 15
AFLR2 : Nodes, Trias,Quads= 2270 4354 0
AFLR4 : Nodes, Trias,Quads= 2258 4330 0
AFLR4 : Generate optimal mesh on surface definition 16
AFLR2 : Nodes, Trias,Quads= 2270 4354 0
AFLR4 : Nodes, Trias,Quads= 2259 4332 0
AFLR4 : Generate optimal mesh on surface definition 17
AFLR2 : Nodes, Trias,Quads= 515 964 0
AFLR4 : Nodes, Trias,Quads= 413 760 0
AFLR4 : Generate optimal mesh on surface definition 18
AFLR2 : Nodes, Trias,Quads= 504 942 0
AFLR4 : Nodes, Trias,Quads= 402 738 0
AFLR4 : Generate optimal mesh on surface definition 19
AFLR2 : Nodes, Trias,Quads= 2270 4354 0
AFLR4 : Nodes, Trias,Quads= 2258 4330 0
AFLR4 : Generate optimal mesh on surface definition 20
AFLR2 : Nodes, Trias,Quads= 2270 4354 0
AFLR4 : Nodes, Trias,Quads= 2259 4332 0
AFLR4 : Generate optimal mesh on surface definition 21
AFLR2 : Nodes, Trias,Quads= 515 964 0
AFLR4 : Nodes, Trias,Quads= 413 760 0
AFLR4 : Generate optimal mesh on surface definition 22
AFLR2 : Nodes, Trias,Quads= 504 942 0
AFLR4 : Nodes, Trias,Quads= 402 738 0
DGEOM : Add surface definitions to composite definition 0
DGEOM : Glue composite surface definition 0
DGEOM : Nodes,Faces,BEdges= 20764 41508 2224
AFLR4 : Curvature BG Surface Grid Generation
AFLR4 : Nodes, Faces = 20764 41508
AFLR4 : Surface Grid Generation
AFLR4 : Generate optimal mesh on surface definition 1
AFLR2 : Nodes, Trias,Quads= 46 60 0
AFLR4 : Nodes, Trias,Quads= 30 28 0
AFLR4 : Generate optimal mesh on surface definition 2
AFLR2 : Nodes, Trias,Quads= 46 60 0
AFLR4 : Nodes, Trias,Quads= 30 28 0
AFLR4 : Generate optimal mesh on surface definition 3
AFLR2 : Nodes, Trias,Quads= 201 348 0
AFLR4 : Nodes, Trias,Quads= 193 332 0
AFLR4 : Generate optimal mesh on surface definition 4
AFLR2 : Nodes, Trias,Quads= 204 354 0
AFLR4 : Nodes, Trias,Quads= 193 332 0
AFLR4 : Generate optimal mesh on surface definition 5
AFLR2 : Nodes, Trias,Quads= 46 60 0
AFLR4 : Nodes, Trias,Quads= 30 28 0
AFLR4 : Generate optimal mesh on surface definition 6
AFLR2 : Nodes, Trias,Quads= 46 60 0
AFLR4 : Nodes, Trias,Quads= 30 28 0
AFLR4 : Generate optimal mesh on surface definition 7
AFLR2 : Nodes, Trias,Quads= 2245 4304 0
AFLR4 : Nodes, Trias,Quads= 2245 4304 0
AFLR4 : Generate optimal mesh on surface definition 8
AFLR2 : Nodes, Trias,Quads= 2248 4310 0
AFLR4 : Nodes, Trias,Quads= 2247 4308 0
AFLR4 : Generate optimal mesh on surface definition 9
AFLR2 : Nodes, Trias,Quads= 496 926 0
AFLR4 : Nodes, Trias,Quads= 416 766 0
AFLR4 : Generate optimal mesh on surface definition 10
AFLR2 : Nodes, Trias,Quads= 502 938 0
AFLR4 : Nodes, Trias,Quads= 408 750 0
AFLR4 : Generate optimal mesh on surface definition 11
AFLR2 : Nodes, Trias,Quads= 2245 4304 0
AFLR4 : Nodes, Trias,Quads= 2244 4302 0
AFLR4 : Generate optimal mesh on surface definition 12
AFLR2 : Nodes, Trias,Quads= 2248 4310 0
AFLR4 : Nodes, Trias,Quads= 2248 4310 0
AFLR4 : Generate optimal mesh on surface definition 13
AFLR2 : Nodes, Trias,Quads= 496 926 0
AFLR4 : Nodes, Trias,Quads= 416 766 0
AFLR4 : Generate optimal mesh on surface definition 14
AFLR2 : Nodes, Trias,Quads= 502 938 0
AFLR4 : Nodes, Trias,Quads= 408 750 0
AFLR4 : Generate optimal mesh on surface definition 15
AFLR2 : Nodes, Trias,Quads= 2245 4304 0
AFLR4 : Nodes, Trias,Quads= 2244 4302 0
AFLR4 : Generate optimal mesh on surface definition 16
AFLR2 : Nodes, Trias,Quads= 2248 4310 0
AFLR4 : Nodes, Trias,Quads= 2247 4308 0
AFLR4 : Generate optimal mesh on surface definition 17
AFLR2 : Nodes, Trias,Quads= 496 926 0
AFLR4 : Nodes, Trias,Quads= 416 766 0
AFLR4 : Generate optimal mesh on surface definition 18
AFLR2 : Nodes, Trias,Quads= 502 938 0
AFLR4 : Nodes, Trias,Quads= 408 750 0
AFLR4 : Generate optimal mesh on surface definition 19
AFLR2 : Nodes, Trias,Quads= 2245 4304 0
AFLR4 : Nodes, Trias,Quads= 2244 4302 0
AFLR4 : Generate optimal mesh on surface definition 20
AFLR2 : Nodes, Trias,Quads= 2248 4310 0
AFLR4 : Nodes, Trias,Quads= 2249 4312 0
AFLR4 : Generate optimal mesh on surface definition 21
AFLR2 : Nodes, Trias,Quads= 496 926 0
AFLR4 : Nodes, Trias,Quads= 416 766 0
AFLR4 : Generate optimal mesh on surface definition 22
AFLR2 : Nodes, Trias,Quads= 502 938 0
AFLR4 : Nodes, Trias,Quads= 408 750 0
DGEOM : Add surface definitions to composite definition 0
DGEOM : Glue composite surface definition 0
DGEOM : Nodes,Faces,BEdges= 20654 41288 2208
AFLR4 : Proximity BG Surface Grid Generation
AFLR4 : Nodes, Trias = 21567 43114
AFLR4 : Nodes, Trias = 22451 44882
AFLR4 : Nodes, Trias = 22543 45066
AFLR4 : Surface Grid Generation
AFLR4 : Generate optimal mesh on surface definition 1
AFLR2 : Nodes, Trias,Quads= 311 517 0
AFLR4 : Nodes, Trias,Quads= 309 513 0
AFLR4 : Generate optimal mesh on surface definition 2
AFLR2 : Nodes, Trias,Quads= 313 521 0
AFLR4 : Nodes, Trias,Quads= 309 513 0
AFLR4 : Generate optimal mesh on surface definition 3
AFLR2 : Nodes, Trias,Quads= 3277 6339 0
AFLR4 : Nodes, Trias,Quads= 1431 2647 0
AFLR4 : Generate optimal mesh on surface definition 4
AFLR2 : Nodes, Trias,Quads= 1864 3566 0
AFLR4 : Nodes, Trias,Quads= 1736 3310 0
AFLR4 : Generate optimal mesh on surface definition 5
AFLR2 : Nodes, Trias,Quads= 315 525 0
AFLR4 : Nodes, Trias,Quads= 307 509 0
AFLR4 : Generate optimal mesh on surface definition 6
AFLR2 : Nodes, Trias,Quads= 318 530 0
AFLR4 : Nodes, Trias,Quads= 314 522 0
AFLR4 : Generate optimal mesh on surface definition 7
AFLR2 : Nodes, Trias,Quads= 2301 4412 0
AFLR4 : Nodes, Trias,Quads= 2273 4356 0
AFLR4 : Generate optimal mesh on surface definition 8
AFLR2 : Nodes, Trias,Quads= 2302 4414 0
AFLR4 : Nodes, Trias,Quads= 2276 4362 0
AFLR4 : Generate optimal mesh on surface definition 9
AFLR2 : Nodes, Trias,Quads= 548 1028 0
AFLR4 : Nodes, Trias,Quads= 423 778 0
AFLR4 : Generate optimal mesh on surface definition 10
AFLR2 : Nodes, Trias,Quads= 549 1030 0
AFLR4 : Nodes, Trias,Quads= 418 768 0
AFLR4 : Generate optimal mesh on surface definition 11
AFLR2 : Nodes, Trias,Quads= 2301 4412 0
AFLR4 : Nodes, Trias,Quads= 2274 4358 0
AFLR4 : Generate optimal mesh on surface definition 12
AFLR2 : Nodes, Trias,Quads= 2302 4414 0
AFLR4 : Nodes, Trias,Quads= 2273 4356 0
AFLR4 : Generate optimal mesh on surface definition 13
AFLR2 : Nodes, Trias,Quads= 548 1028 0
AFLR4 : Nodes, Trias,Quads= 423 778 0
AFLR4 : Generate optimal mesh on surface definition 14
AFLR2 : Nodes, Trias,Quads= 549 1030 0
AFLR4 : Nodes, Trias,Quads= 418 768 0
AFLR4 : Generate optimal mesh on surface definition 15
AFLR2 : Nodes, Trias,Quads= 2301 4412 0
AFLR4 : Nodes, Trias,Quads= 2271 4352 0
AFLR4 : Generate optimal mesh on surface definition 16
AFLR2 : Nodes, Trias,Quads= 2302 4414 0
AFLR4 : Nodes, Trias,Quads= 2274 4358 0
AFLR4 : Generate optimal mesh on surface definition 17
AFLR2 : Nodes, Trias,Quads= 548 1028 0
AFLR4 : Nodes, Trias,Quads= 423 778 0
AFLR4 : Generate optimal mesh on surface definition 18
AFLR2 : Nodes, Trias,Quads= 549 1030 0
AFLR4 : Nodes, Trias,Quads= 418 768 0
AFLR4 : Generate optimal mesh on surface definition 19
AFLR2 : Nodes, Trias,Quads= 2301 4412 0
AFLR4 : Nodes, Trias,Quads= 2271 4352 0
AFLR4 : Generate optimal mesh on surface definition 20
AFLR2 : Nodes, Trias,Quads= 2302 4414 0
AFLR4 : Nodes, Trias,Quads= 2276 4362 0
AFLR4 : Generate optimal mesh on surface definition 21
AFLR2 : Nodes, Trias,Quads= 548 1028 0
AFLR4 : Nodes, Trias,Quads= 423 778 0
AFLR4 : Generate optimal mesh on surface definition 22
AFLR2 : Nodes, Trias,Quads= 549 1030 0
AFLR4 : Nodes, Trias,Quads= 418 768 0
DGEOM : Add surface definitions to composite definition 0
DGEOM : Glue composite surface definition 0
DGEOM : Nodes,Faces,BEdges= 24537 49054 2818
OVERALL : CPU Time = 1.795 seconds
Body 1 (of 5)
Number of nodes = 4009
Number of elements = 8014
Number of triangle elements = 8014
Number of quadrilateral elements = 0
Body 2 (of 5)
Number of nodes = 5134
Number of elements = 10264
Number of triangle elements = 10264
Number of quadrilateral elements = 0
Body 3 (of 5)
Number of nodes = 5132
Number of elements = 10260
Number of triangle elements = 10260
Number of quadrilateral elements = 0
Body 4 (of 5)
Number of nodes = 5130
Number of elements = 10256
Number of triangle elements = 10256
Number of quadrilateral elements = 0
Body 5 (of 5)
Number of nodes = 5132
Number of elements = 10260
Number of triangle elements = 10260
Number of quadrilateral elements = 0
----------------------------
Total number of nodes = 24537
Total number of elements = 49054
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 5
Name = tableTopSide, index = 1
Name = leg0Side, index = 2
Name = leg1Side, index = 3
Name = leg2Side, index = 4
Name = leg3Side, index = 5
Body 1 number of surface: nodes - 4009, elements - 8014
Body 2 number of surface: nodes - 5134, elements - 10264
Body 3 number of surface: nodes - 5132, elements - 10260
Body 4 number of surface: nodes - 5130, elements - 10256
Body 5 number of surface: nodes - 5132, elements - 10260
Getting volume mesh
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.06729
Creating surface mesh ...
Surface mesh seconds: 0.014836
Recovering boundaries...
Boundary recovery seconds: 0.036891
Removing exterior tetrahedra ...
Spreading region attributes.
Exterior tets removal seconds: 0.006613
Recovering Delaunayness...
Delaunay recovery seconds: 0.012305
Refining mesh...
Refinement seconds: 0.093636
Smoothing vertices...
Mesh smoothing seconds: 0.156352
Improving mesh...
Mesh improvement seconds: 0.01788
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.003923
Total running seconds: 0.410883
Statistics:
Input points: 4009
Input facets: 8014
Input segments: 12021
Input holes: 0
Input regions: 1
Mesh points: 4748
Mesh tetrahedra: 15739
Mesh faces: 35485
Mesh faces on exterior boundary: 8014
Mesh faces on input facets: 8014
Mesh edges on input segments: 12021
Steiner points inside domain: 739
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.146232
Creating surface mesh ...
Surface mesh seconds: 0.019397
Recovering boundaries...
Boundary recovery seconds: 0.088223
Removing exterior tetrahedra ...
Warning: The 1-th region point lies outside the convex hull.
Spreading region attributes.
Exterior tets removal seconds: 0.042568
Recovering Delaunayness...
Delaunay recovery seconds: 0.036047
Refining mesh...
Refinement seconds: 0.330038
Smoothing vertices...
Mesh smoothing seconds: 0.312743
Improving mesh...
Mesh improvement seconds: 0.022153
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.006907
Total running seconds: 1.00518
Statistics:
Input points: 5134
Input facets: 10264
Input segments: 15396
Input holes: 0
Input regions: 2
Mesh points: 6599
Mesh tetrahedra: 23322
Mesh faces: 51776
Mesh faces on exterior boundary: 10264
Mesh faces on input facets: 10264
Mesh edges on input segments: 15396
Steiner points inside domain: 1465
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.151049
Creating surface mesh ...
Surface mesh seconds: 0.026135
Recovering boundaries...
Boundary recovery seconds: 0.08529
Removing exterior tetrahedra ...
Warning: The 1-th region point lies outside the convex hull.
Warning: The 2-th region point lies outside the convex hull.
Spreading region attributes.
Exterior tets removal seconds: 0.042375
Recovering Delaunayness...
Delaunay recovery seconds: 0.036399
Refining mesh...
Refinement seconds: 0.348097
Smoothing vertices...
Mesh smoothing seconds: 0.303044
Improving mesh...
Mesh improvement seconds: 0.020759
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.006978
Total running seconds: 1.02164
Statistics:
Input points: 5132
Input facets: 10260
Input segments: 15390
Input holes: 0
Input regions: 3
Mesh points: 6597
Mesh tetrahedra: 23258
Mesh faces: 51646
Mesh faces on exterior boundary: 10260
Mesh faces on input facets: 10260
Mesh edges on input segments: 15390
Steiner points inside domain: 1465
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.142023
Creating surface mesh ...
Surface mesh seconds: 0.018299
Recovering boundaries...
Boundary recovery seconds: 0.082556
Removing exterior tetrahedra ...
Warning: The 1-th region point lies outside the convex hull.
Warning: The 2-th region point lies outside the convex hull.
Warning: The 3-th region point lies outside the convex hull.
Spreading region attributes.
Exterior tets removal seconds: 0.046167
Recovering Delaunayness...
Delaunay recovery seconds: 0.044749
Refining mesh...
Refinement seconds: 0.310542
Smoothing vertices...
Mesh smoothing seconds: 0.278478
Improving mesh...
Mesh improvement seconds: 0.024297
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.007184
Total running seconds: 0.955418
Statistics:
Input points: 5130
Input facets: 10256
Input segments: 15384
Input holes: 0
Input regions: 4
Mesh points: 6610
Mesh tetrahedra: 23420
Mesh faces: 51968
Mesh faces on exterior boundary: 10256
Mesh faces on input facets: 10256
Mesh edges on input segments: 15384
Steiner points inside domain: 1480
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.150383
Creating surface mesh ...
Surface mesh seconds: 0.024331
Recovering boundaries...
Boundary recovery seconds: 0.085399
Removing exterior tetrahedra ...
Warning: The 1-th region point lies outside the convex hull.
Warning: The 2-th region point lies outside the convex hull.
Warning: The 3-th region point lies outside the convex hull.
Warning: The 4-th region point lies outside the convex hull.
Spreading region attributes.
Exterior tets removal seconds: 0.041842
Recovering Delaunayness...
Delaunay recovery seconds: 0.04461
Refining mesh...
Refinement seconds: 0.306771
Smoothing vertices...
Mesh smoothing seconds: 0.279364
Improving mesh...
Mesh improvement seconds: 0.025946
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.006254
Total running seconds: 0.966317
Statistics:
Input points: 5132
Input facets: 10260
Input segments: 15390
Input holes: 0
Input regions: 5
Mesh points: 6601
Mesh tetrahedra: 23353
Mesh faces: 51836
Mesh faces on exterior boundary: 10260
Mesh faces on input facets: 10260
Mesh edges on input segments: 15390
Steiner points inside domain: 1469
Done meshing using TetGen!
Writing vtk file ....
Writing vtk general file ....
Finished writing vtk file
Writing exodus file ....
Block: 'tableTop_tet', blk_id 1, num_entries 15739
Block: 'leg0_tet', blk_id 2, num_entries 23322
Block: 'leg1_tet', blk_id 3, num_entries 23258
Block: 'leg2_tet', blk_id 4, num_entries 23420
Block: 'leg3_tet', blk_id 5, num_entries 23353
Sideset: 'leg0Side', set_id 1, num_entries 10264
Sideset: 'leg1Side', set_id 2, num_entries 10260
Sideset: 'leg2Side', set_id 3, num_entries 10256
Sideset: 'leg3Side', set_id 4, num_entries 10260
Sideset: 'tableTopSide', set_id 5, num_entries 8014
Nodeset: 'edge', set_id 1, num_entries 41
Nodeset: 'face1', set_id 2, num_entries 610
Nodeset: 'face2', set_id 3, num_entries 617
Nodeset: 'node', set_id 4, num_entries 1
Finished writing Exodus file
real 0m12.666s
user 0m11.551s
sys 0m1.145s
+ status=0
+ set +x
=================================================
CAPS verification (using pyCAPS) case plato_aflr_tetgen_table_PyTest.py passed (as expected)
=================================================
=================================================
+ echo 'plato_aflr_tetgen_cyli_box_PyTest.py test;'
+ tee -a /Users/jenkins/workspace/ESP_MemcheckCaps/7.8/CAPS/STRUCTURE/DARWIN64/ESP/DARWIN64/examples/regressionTest/pyCAPSlog.txt
plato_aflr_tetgen_cyli_box_PyTest.py test;
+ python -u plato_aflr_tetgen_cyli_box_PyTest.py -outLevel=0
+ tee -a /Users/jenkins/workspace/ESP_MemcheckCaps/7.8/CAPS/STRUCTURE/DARWIN64/ESP/DARWIN64/examples/regressionTest/pyCAPSlog.txt
EGADS Warning: Loop 2 marked with -1
EGADS Warning: Loop 2 marked with -1
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 5
Name = box, index = 1
Name = cyl2, index = 2
Name = box;cyl2, index = 3
Name = cyl1, index = 4
Name = cyl1;box;cyl2, index = 5
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 0
AFLR2 : ---------------------------------------
AFLR2 : AFLR2 LIBRARY
AFLR2 : ADVANCING-FRONT/LOCAL-RECONNECTION
AFLR2 : TRIA/QUAD GRID GENERATOR
AFLR2 : Version Number 9.17.15
AFLR2 : Version Date 04/23/24 @ 12:51AM
AFLR2 : Compile OS Darwin 23.4.0 x86_64
AFLR2 : Compile Date 04/23/24 @ 11:49AM
AFLR2 : Copyright 1994-2021, D.L. Marcum
AFLR2 : ---------------------------------------
AFLR4 : ---------------------------------------
AFLR4 : AFLR4 LIBRARY
AFLR4 : ADVANCING-FRONT/LOCAL-RECONNECTION
AFLR4 : TRIA/QUAD SURFACE GRID GENERATOR
AFLR4 : Version Number 11.5.14
AFLR4 : Version Date 04/18/24 @ 12:45PM
AFLR4 : Compile OS Darwin 23.4.0 x86_64
AFLR4 : Compile Date 04/23/24 @ 11:49AM
AFLR4 : Copyright 1994-2021, D.L. Marcum
AFLR4 : ---------------------------------------
EGADS : ---------------------------------------
EGADS : Engineering Geometry Aircraft Design System
EGADS : Version 1.26
EGADS : OpenCASCADE Version 7.8.0
EGADS : ---------------------------------------
EGADS : EGADS CAD Geometry Setup
EGADS : Model has 1 Active Bodies
EGADS : Body 0 is a SheetBody
EGADS : Body 0 has 1 Shells
EGADS : Body 0 has 14 Faces
EGADS : Body 0 has 24 Edges
EGADS : Body 0 has 18 Loops
EGADS : Body 0 has 16 Nodes
EGADS : Check Grid BCs
EGADS : Grid BCs are OK
EGADS : Face Neighbor-Faces Information
EGADS : QC = Face Quad Combination Flag
EGADS : IER = Face Isolated Edge Refinement Flag
EGADS : ER = Face Edge Refinement Factor
EGADS : Not applicable for Faces with a FarField Grid BC.
EGADS : SF = Face Scale Factor
EGADS : Not applicable for Faces with a FarField Grid BC.
EGADS : Face Body QC IER ER Scale Neighbor
EGADS : ID Active ID Flag Flag Weight Factor Faces
EGADS : 1 Yes 0 0 1 0 1 2 6 7 8
EGADS : 2 Yes 0 0 1 0 1 1 3 4 5 7 8 9
EGADS : 3 Yes 0 0 1 0 1 2 4 6 9 12
EGADS : 4 Yes 0 0 1 0 1 2 3 6 9 12
EGADS : 5 Yes 0 0 1 0 1 2 6 7 8
EGADS : 6 Yes 0 0 1 0 1 1 3 4 5 7 8 12
EGADS : 7 Yes 0 0 1 0 1 1 2 5 6
EGADS : 8 Yes 0 0 1 0 1 1 2 5 6
EGADS : 9 Yes 0 0 1 0 1 2 3 4 10 11 13
EGADS : 10 Yes 0 0 1 0 1 9 11 12 13 14
EGADS : 11 Yes 0 0 1 0 1 9 10 12 13 14
EGADS : 12 Yes 0 0 1 0 1 3 4 6 10 11 14
EGADS : 13 Yes 0 0 1 0 1 9 10 11
EGADS : 14 Yes 0 0 1 0 1 10 11 12
EGADS : Face Edges Information
EGADS : Face Edges
EGADS : 1 -1 4 3 -2
EGADS : 2 5 1 -6 -7 8 9
EGADS : 3 10 -12 -11 8
EGADS : 4 -10 9 11 -13
EGADS : 5 7 14 -15 -16
EGADS : 6 -17 15 18 -3 -12 -13
EGADS : 7 16 17 -4 -5
EGADS : 8 -14 6 2 -18
EGADS : 9 -8 -9 19 20
EGADS : 10 21 -23 -22 19
EGADS : 11 -21 20 22 -24
EGADS : 12 12 13 -23 -24
EGADS : 13 -19 -20
EGADS : 14 23 24
EGADS : Face Loops Information
EGADS : Face Loops
EGADS : 1 1
EGADS : 2 2 3
EGADS : 3 4
EGADS : 4 5
EGADS : 5 6
EGADS : 6 7 8
EGADS : 7 9
EGADS : 8 10
EGADS : 9 11 12
EGADS : 10 13
EGADS : 11 14
EGADS : 12 15 16
EGADS : 13 17
EGADS : 14 18
EGADS : Loop Edges Information
EGADS : Loop Active Edges
EGADS : 1 Yes -1 4 3 -2
EGADS : 2 Yes 5 1 -6 -7
EGADS : 3 Yes 8 9
EGADS : 4 Yes 10 -12 -11 8
EGADS : 5 Yes -10 9 11 -13
EGADS : 6 Yes 7 14 -15 -16
EGADS : 7 Yes -17 15 18 -3
EGADS : 8 Yes -12 -13
EGADS : 9 Yes 16 17 -4 -5
EGADS : 10 Yes -14 6 2 -18
EGADS : 11 Yes -8 -9
EGADS : 12 Yes 19 20
EGADS : 13 Yes 21 -23 -22 19
EGADS : 14 Yes -21 20 22 -24
EGADS : 15 Yes 12 13
EGADS : 16 Yes -23 -24
EGADS : 17 Yes -19 -20
EGADS : 18 Yes 23 24
EGADS : Edge Node, Scale Factor, and Neighbor-Faces Information
EGADS : ESF = Edge Scale Factor
EGADS : Not applicable for DEGENERATE Edges or Edges with a FarField
EGADS : Grid BC Neighbor Face.
EGADS : Neighbor
EGADS : Edge Body Active Node1 Node2 ESF Faces
EGADS : 1 0 Yes 2 1 1 1 2
EGADS : 2 0 Yes 1 3 1 1 8
EGADS : 3 0 Yes 4 3 1 1 6
EGADS : 4 0 Yes 2 4 1 1 7
EGADS : 5 0 Yes 5 2 1 2 7
EGADS : 6 0 Yes 6 1 1 2 8
EGADS : 7 0 Yes 5 6 1 2 5
EGADS : 8 0 Yes 7 8 1 2 3 9
EGADS : 9 0 Yes 8 7 1 2 4 9
EGADS : 10 0 Yes 8 9 1 3 4
EGADS : 11 0 Yes 7 10 1 3 4
EGADS : 12 0 Yes 10 9 1 3 6 12
EGADS : 13 0 Yes 9 10 1 4 6 12
EGADS : 14 0 Yes 6 11 1 5 8
EGADS : 15 0 Yes 12 11 1 5 6
EGADS : 16 0 Yes 5 12 1 5 7
EGADS : 17 0 Yes 12 4 1 6 7
EGADS : 18 0 Yes 11 3 1 6 8
EGADS : 19 0 Yes 13 14 1 9 10 13
EGADS : 20 0 Yes 14 13 1 9 11 13
EGADS : 21 0 Yes 14 15 1 10 11
EGADS : 22 0 Yes 13 16 1 10 11
EGADS : 23 0 Yes 16 15 1 10 12 14
EGADS : 24 0 Yes 15 16 1 11 12 14
EGADS : Node Information
EGADS : Node Active Coordinates
EGADS : 1 Yes 0.5 0 0.5
EGADS : 2 Yes 0.5 0 0
EGADS : 3 Yes 0.5 0.5 0.5
EGADS : 4 Yes 0.5 0.5 0
EGADS : 5 Yes 0 0 0
EGADS : 6 Yes 0 0 0.5
EGADS : 7 Yes 0 0 0.2
EGADS : 8 Yes 0 0 0
EGADS : 9 Yes 0 0.5 0
EGADS : 10 Yes 0 0.5 0.2
EGADS : 11 Yes 0 0.5 0.5
EGADS : 12 Yes 0 0.5 0
EGADS : 13 Yes 0 0 0.1
EGADS : 14 Yes 0 0 0
EGADS : 15 Yes 0 0.5 0
EGADS : 16 Yes 0 0.5 0.1
EGADS : Face and Edge Match Information
EGADS : No Face Matches Found
AFLR4 : Surface Mesh Spacing Setup
AFLR4 : Max Bounding Box Length = 1
AFLR4 : Min Bounding Box Length = 1
AFLR4 : Max Ref Bounding Box Length = 1
AFLR4 : Min Ref Bounding Box Length = 1
AFLR4 : Reference Length = 1
AFLR4 : BL Thickness = 0
AFLR4 : Abs Min Surf Spacing = 0.0025
AFLR4 : Min Surf Spacing = 0.005
AFLR4 : Max Surf Spacing = 0.1
AFLR4 : Global Scale Factor = 1
AFLR4 : Geometry Definition Information
AFLR4 : Definition Definition Composite Grid BC
AFLR4 : ID Type ID Type
AFLR4 : 0 glue-only composite - -
AFLR4 : 1 CAD geometry 0 STD
AFLR4 : 2 CAD geometry 0 STD
AFLR4 : 3 CAD geometry 0 TRANSP
AFLR4 : 4 CAD geometry 0 TRANSP
AFLR4 : 5 CAD geometry 0 STD
AFLR4 : 6 CAD geometry 0 STD
AFLR4 : 7 CAD geometry 0 STD
AFLR4 : 8 CAD geometry 0 STD
AFLR4 : 9 CAD geometry 0 STD
AFLR4 : 10 CAD geometry 0 TRANSP
AFLR4 : 11 CAD geometry 0 TRANSP
AFLR4 : 12 CAD geometry 0 STD
AFLR4 : 13 CAD geometry 0 STD
AFLR4 : 14 CAD geometry 0 STD
AFLR4 : Define CAD surface definition 1
AFLR4 : Define CAD surface definition 2
AFLR4 : Define CAD surface definition 3
AFLR4 : Define CAD surface definition 4
AFLR4 : Define CAD surface definition 5
AFLR4 : Define CAD surface definition 6
AFLR4 : Define CAD surface definition 7
AFLR4 : Define CAD surface definition 8
AFLR4 : Define CAD surface definition 9
AFLR4 : Define CAD surface definition 10
AFLR4 : Define CAD surface definition 11
AFLR4 : Define CAD surface definition 12
AFLR4 : Define CAD surface definition 13
AFLR4 : Define CAD surface definition 14
AFLR4 : Surface Grid Generation
AFLR4 : Generate optimal mesh on surface definition 1
AFLR2 : Nodes, Trias,Quads= 136 230 0
AFLR4 : Nodes, Trias,Quads= 132 222 0
AFLR4 : Generate optimal mesh on surface definition 2
AFLR2 : Nodes, Trias,Quads= 486 868 0
AFLR4 : Nodes, Trias,Quads= 477 850 0
AFLR4 : Generate optimal mesh on surface definition 3
AFLR2 : Nodes, Trias,Quads= 1904 3642 0
AFLR4 : Nodes, Trias,Quads= 1889 3612 0
AFLR4 : Generate optimal mesh on surface definition 4
AFLR2 : Nodes, Trias,Quads= 1904 3642 0
AFLR4 : Nodes, Trias,Quads= 1889 3612 0
AFLR4 : Generate optimal mesh on surface definition 5
AFLR2 : Nodes, Trias,Quads= 136 230 0
AFLR4 : Nodes, Trias,Quads= 132 222 0
AFLR4 : Generate optimal mesh on surface definition 6
AFLR2 : Nodes, Trias,Quads= 486 868 0
AFLR4 : Nodes, Trias,Quads= 476 848 0
AFLR4 : Generate optimal mesh on surface definition 7
AFLR2 : Nodes, Trias,Quads= 134 226 0
AFLR4 : Nodes, Trias,Quads= 132 222 0
AFLR4 : Generate optimal mesh on surface definition 8
AFLR2 : Nodes, Trias,Quads= 135 228 0
AFLR4 : Nodes, Trias,Quads= 131 220 0
AFLR4 : Generate optimal mesh on surface definition 9
AFLR2 : Nodes, Trias,Quads= 582 1036 0
AFLR4 : Nodes, Trias,Quads= 576 1024 0
AFLR4 : Generate optimal mesh on surface definition 10
AFLR2 : Nodes, Trias,Quads= 3745 7224 0
AFLR4 : Nodes, Trias,Quads= 3741 7216 0
AFLR4 : Generate optimal mesh on surface definition 11
AFLR2 : Nodes, Trias,Quads= 3745 7224 0
AFLR4 : Nodes, Trias,Quads= 3741 7216 0
AFLR4 : Generate optimal mesh on surface definition 12
AFLR2 : Nodes, Trias,Quads= 582 1036 0
AFLR4 : Nodes, Trias,Quads= 576 1024 0
AFLR4 : Generate optimal mesh on surface definition 13
AFLR2 : Nodes, Trias,Quads= 504 942 0
AFLR4 : Nodes, Trias,Quads= 402 738 0
AFLR4 : Generate optimal mesh on surface definition 14
AFLR2 : Nodes, Trias,Quads= 515 964 0
AFLR4 : Nodes, Trias,Quads= 413 760 0
DGEOM : Add surface definitions to composite definition 0
DGEOM : Glue composite surface definition 0
DGEOM : Nodes,Faces,BEdges= 13767 27786 1608
AFLR4 : Curvature BG Surface Grid Generation
AFLR4 : Nodes, Faces = 13767 27786
AFLR4 : Surface Grid Generation
AFLR4 : Generate optimal mesh on surface definition 1
AFLR2 : Nodes, Trias,Quads= 137 232 0
AFLR4 : Nodes, Trias,Quads= 132 222 0
AFLR4 : Generate optimal mesh on surface definition 2
AFLR2 : Nodes, Trias,Quads= 507 910 0
AFLR4 : Nodes, Trias,Quads= 711 1318 0
AFLR4 : Generate optimal mesh on surface definition 3
AFLR2 : Nodes, Trias,Quads= 1882 3598 0
AFLR4 : Nodes, Trias,Quads= 1883 3600 0
AFLR4 : Generate optimal mesh on surface definition 4
AFLR2 : Nodes, Trias,Quads= 1876 3586 0
AFLR4 : Nodes, Trias,Quads= 1882 3598 0
AFLR4 : Generate optimal mesh on surface definition 5
AFLR2 : Nodes, Trias,Quads= 136 230 0
AFLR4 : Nodes, Trias,Quads= 132 222 0
AFLR4 : Generate optimal mesh on surface definition 6
AFLR2 : Nodes, Trias,Quads= 499 894 0
AFLR4 : Nodes, Trias,Quads= 710 1316 0
AFLR4 : Generate optimal mesh on surface definition 7
AFLR2 : Nodes, Trias,Quads= 136 230 0
AFLR4 : Nodes, Trias,Quads= 132 222 0
AFLR4 : Generate optimal mesh on surface definition 8
AFLR2 : Nodes, Trias,Quads= 137 232 0
AFLR4 : Nodes, Trias,Quads= 132 222 0
AFLR4 : Generate optimal mesh on surface definition 9
AFLR2 : Nodes, Trias,Quads= 576 1024 0
AFLR4 : Nodes, Trias,Quads= 576 1024 0
AFLR4 : Generate optimal mesh on surface definition 10
AFLR2 : Nodes, Trias,Quads= 3736 7206 0
AFLR4 : Nodes, Trias,Quads= 3727 7188 0
AFLR4 : Generate optimal mesh on surface definition 11
AFLR2 : Nodes, Trias,Quads= 3735 7204 0
AFLR4 : Nodes, Trias,Quads= 3730 7194 0
AFLR4 : Generate optimal mesh on surface definition 12
AFLR2 : Nodes, Trias,Quads= 576 1024 0
AFLR4 : Nodes, Trias,Quads= 576 1024 0
AFLR4 : Generate optimal mesh on surface definition 13
AFLR2 : Nodes, Trias,Quads= 504 942 0
AFLR4 : Nodes, Trias,Quads= 406 746 0
AFLR4 : Generate optimal mesh on surface definition 14
AFLR2 : Nodes, Trias,Quads= 498 930 0
AFLR4 : Nodes, Trias,Quads= 416 766 0
DGEOM : Add surface definitions to composite definition 0
DGEOM : Glue composite surface definition 0
DGEOM : Nodes,Faces,BEdges= 14205 28662 1608
OVERALL : CPU Time = 0.657 seconds
Body 1 (of 1)
Number of nodes = 14205
Number of elements = 28662
Number of triangle elements = 28662
Number of quadrilateral elements = 0
----------------------------
Total number of nodes = 14205
Total number of elements = 28662
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 5
Name = box, index = 1
Name = cyl2, index = 2
Name = box;cyl2, index = 3
Name = cyl1, index = 4
Name = cyl1;box;cyl2, index = 5
Number of surface: nodes - 14205, elements - 28662
Getting volume mesh
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.347139
Creating surface mesh ...
Surface mesh seconds: 0.062417
Recovering boundaries...
Boundary recovery seconds: 0.175467
Removing exterior tetrahedra ...
Warning: The 3-th region point lies outside the convex hull.
Spreading region attributes.
Exterior tets removal seconds: 0.031183
Recovering Delaunayness...
Delaunay recovery seconds: 0.20391
Refining mesh...
Refinement seconds: 1.34267
Smoothing vertices...
Mesh smoothing seconds: 1.69562
Improving mesh...
Mesh improvement seconds: 0.116255
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.017867
Total running seconds: 3.99462
Statistics:
Input points: 14205
Input facets: 28662
Input segments: 42865
Input holes: 0
Input regions: 3
Mesh points: 22379
Mesh tetrahedra: 121977
Mesh faces: 247495
Mesh faces on exterior boundary: 7082
Mesh faces on input facets: 28662
Mesh edges on input segments: 42865
Steiner points inside domain: 8174
Done meshing using TetGen!
Writing vtk file ....
Writing vtk general file ....
Finished writing vtk file
Writing exodus file ....
Block: 'b_tet', blk_id 1, num_entries 58303
Block: 'a_tet', blk_id 2, num_entries 36164
Block: 'c_tet', blk_id 3, num_entries 27510
Sideset: 'box', set_id 1, num_entries 7082
Sideset: 'cyl1', set_id 2, num_entries 15894
Sideset: 'cyl2', set_id 3, num_entries 10758
Finished writing Exodus file
real 0m17.001s
user 0m15.967s
sys 0m1.106s
+ status=0
+ set +x
=================================================
CAPS verification (using pyCAPS) case plato_aflr_tetgen_cyli_box_PyTest.py passed (as expected)
=================================================
*************************************************
*************************************************
=================================================
Did not run examples for:
abaqus
Nastran
Mystran
=================================================
All tests pass!
=================================================
=================================================
[GNU C Compiler (gcc)] Parsing console log (workspace: '/Users/jenkins/workspace/ESP_MemcheckCaps/7.8/CAPS/STRUCTURE/DARWIN64')
[GNU C Compiler (gcc)] Successfully parsed console log
[GNU C Compiler (gcc)] -> found 0 issues (skipped 0 duplicates)
[GNU C Compiler (gcc)] Skipping post processing
[GNU C Compiler (gcc)] No filter has been set, publishing all 0 issues
[GNU C Compiler (gcc)] Repository miner is not configured, skipping repository mining
[Clang] Parsing console log (workspace: '/Users/jenkins/workspace/ESP_MemcheckCaps/7.8/CAPS/STRUCTURE/DARWIN64')
[Clang] -> found 0 issues (skipped 0 duplicates)
[Clang] Parsing console log (workspace: '/Users/jenkins/workspace/ESP_MemcheckCaps/7.8/CAPS/STRUCTURE/DARWIN64')
[Clang] Skipping post processing
[Clang] No filter has been set, publishing all 0 issues
[Clang] Repository miner is not configured, skipping repository mining
[Static Analysis] Successfully parsed console log
[Static Analysis] -> found 0 issues (skipped 0 duplicates)
[Static Analysis] Parsing console log (workspace: '/Users/jenkins/workspace/ESP_MemcheckCaps/7.8/CAPS/STRUCTURE/DARWIN64')
[Static Analysis] Successfully parsed console log
[Static Analysis] -> found 0 issues (skipped 0 duplicates)
[Static Analysis] Skipping post processing
[Static Analysis] No filter has been set, publishing all 0 issues
[Static Analysis] Repository miner is not configured, skipping repository mining
[Static Analysis] Parsing console log (workspace: '/Users/jenkins/workspace/ESP_MemcheckCaps/7.8/CAPS/STRUCTURE/DARWIN64')
[Static Analysis] Skipping post processing
[Static Analysis] No filter has been set, publishing all 0 issues
[Static Analysis] Repository miner is not configured, skipping repository mining
[Static Analysis] Reference build recorder is not configured
[Static Analysis] No valid reference build found
[Static Analysis] All reported issues will be considered outstanding
[Static Analysis] No quality gates have been set - skipping
[Static Analysis] Health report is disabled - skipping
[Static Analysis] Created analysis result for 0 issues (found 0 new issues, fixed 0 issues)
[Static Analysis] Attaching ResultAction with ID 'analysis' to build 'ESP_MemcheckCaps/CASREV=7.8,ESPTEST=CAPS/STRUCTURE,ESP_ARCH=DARWIN64,buildnode=macys #1416'.
[Checks API] No suitable checks publisher found.
[PostBuildScript] - [INFO] Executing post build scripts.
[PostBuildScript] - [INFO] build step #0 should only be executed on MATRIX
[WS-CLEANUP] Deleting project workspace...
[WS-CLEANUP] done
Finished: SUCCESS