Skipping 5,100 KB..
Full Log| 0| 0| 3| 0.0000e+00| 0.0000e+00| 3.5518e+01| 5.533471| 8.048225| 7.830955| 11.027353| -4.557569|
| 0| 0| 4| 0.0000e+00| 0.0000e+00| 3.5542e+01| 6.253620| 8.891330| 8.699682| 11.768084| 2.534539|
| 0| 0| 5| 0.0000e+00| 0.0000e+00| 3.5235e+01| 6.493163| 8.882225| 8.893144| 11.883202| -60.520242|
| 0| 0| 6| 0.0000e+00| 0.0000e+00| 3.5018e+01| 9.200667| 11.738524| 11.988387| 14.912223| -44.365071|
| 0| 0| 7| 0.0000e+00| 0.0000e+00| 3.4943e+01| 8.651940| 11.071123| 11.325719| 14.421711| -44.906622|
| 0| 0| 8| 0.0000e+00| 0.0000e+00| 3.5006e+01| 7.975125| 10.276237| 10.558965| 13.778098| -50.173087|
| 0| 0| 9| 0.0000e+00| 0.0000e+00| 3.5108e+01| 7.947052| 10.255228| 10.669433| 13.780858| -63.785246|
----------------------------- Solver Exit -------------------------------
Maximum number of iterations reached (ITER = 10) before convergence.
+-----------------------------------------------------------------------+
| Convergence Field | Value | Criterion | Converged |
+-----------------------------------------------------------------------+
| rms[Rho]| 7.94705| < -8| No|
+-----------------------------------------------------------------------+
-------------------------------------------------------------------------
+-----------------------------------------------------------------------+
| File Writing Summary | Filename |
+-----------------------------------------------------------------------+
|SU2 binary restart |restart_flow_inviscidWing.dat |
Writing the forces breakdown file (forces_breakdown_inviscidWing.dat).
|CSV file |surface_flow_inviscidWing.csv |
Writing the forces breakdown file (forces_breakdown_inviscidWing.dat).
|Paraview |flow_inviscidWing.vtu |
Writing the forces breakdown file (forces_breakdown_inviscidWing.dat).
|Paraview surface |surface_flow_inviscidWing.vtu |
Writing the forces breakdown file (forces_breakdown_inviscidWing.dat).
+-----------------------------------------------------------------------+
Warning: there are 224 non-physical points in the solution.
Warning: 72 reconstructed states for upwinding are non-physical.
--------------------------- Finalizing Solver ---------------------------
Deleted CNumerics container.
Deleted CIntegration container.
Deleted CSolver container.
Deleted CIteration container.
Deleted CInterface container.
Deleted CGeometry container.
Deleted CFreeFormDefBox class.
Deleted CSurfaceMovement class.
Deleted CVolumetricMovement class.
Deleted CConfig container.
Deleted nInst container.
Deleted COutput class.
-------------------------------------------------------------------------
------------------------- Exit Success (SU2_CFD) ------------------------
==> Total Forces and Moments
--> Cl = -122.955647 Cd = 1.92765
--> Cmx = 1.112673 Cmy = 19.458061 Cmz = 0.9617
--> Cx = 4.073229 Cy = 2.512085 Cz = -122.903279
real 11m35.108s
user 11m18.156s
sys 0m9.755s
+ status=0
+ set +x
=================================================
data/session08/2_su2_InviscidWing.py passed (as expected)
=================================================
=================================================
1_astros_ModalCantilever.py test;
+ python 1_astros_ModalCantilever.py
+ tee -a /jenkins/workspace/ESP_RegCaps/7.8/CAPS/training/LINUX64/CAPS/training/2023/training.log
==> Loading geometry from file "../ESP/transport.csm"...
==> Running mASTROS pre-analysis...
MESSAGE:: Building wingOml
MESSAGE:: Building wingWaffle
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 5
Name = leftWingSkin, index = 1
Name = wingRib, index = 2
Name = riteWingSkin, index = 3
Name = wingSpar1, index = 4
Name = wingSpar2, index = 5
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 2
Name = wingSpar1, index = 1
Name = wingSpar2, index = 2
Getting surface mesh for body 1 (of 1)
Body 1 (of 1)
Number of nodes = 425
Number of elements = 482
Number of triangle elements = 0
Number of quadrilateral elements = 482
----------------------------
Total number of nodes = 425
Total number of elements = 482
Mapping Csys attributes ................
Number of unique Csys attributes = 2
Name = leftWingSkin, index = 1
Name = riteWingSkin, index = 2
Getting FEA coordinate systems.......
Number of coordinate systems - 2
Coordinate system name - leftWingSkin
Coordinate system name - riteWingSkin
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = rootConstraint, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 4
Name = leftWingSkin, index = 1
Name = riteWingSkin, index = 2
Name = leftPointLoad, index = 3
Name = ritePointLoad, index = 4
Mapping capsBound attributes ................
Number of unique capsBound attributes = 4
Name = upperWing, index = 1
Name = lowerWing, index = 2
Name = leftTip, index = 3
Name = riteTip, index = 4
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsReference attributes ................
Number of unique capsReference attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 5
Name = leftWingSkin, index = 1
Name = wingRib, index = 2
Name = riteWingSkin, index = 3
Name = wingSpar1, index = 4
Name = wingSpar2, index = 5
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 425
Number of elements = 482
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 482
Aero_Reference value is NULL - No aero reference parameters set
Getting FEA materials.......
Number of materials - 2
Material name - Madeupium
Material name - Unobtainium
No "materialType" specified for Material tuple Unobtainium, defaulting to "Isotropic"
Done getting FEA materials
Getting FEA properties.......
Number of properties - 5
Property name - leftWingSkin
Property name - riteWingSkin
Property name - wingRib
Property name - wingSpar1
Property name - wingSpar2
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - rootConstraint
No "constraintType" specified for Constraint tuple rootConstraint, defaulting to "ZeroDisplacement"
No "groupName" specified for Constraint tuple rootConstraint, going to use constraint name
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Load tuple is NULL - No loads applied
Optimization Control tuple is NULL - Default optimization control is used
Getting FEA optimization control.......
Done getting FEA Optimization Control
Design_Variable tuple is NULL - No design variables applied
Design_Constraint tuple is NULL - No design constraints applied
Getting FEA analyses.......
Number of analyses - 1
Analysis name - EigenAnalysis
Done getting FEA analyses
Writing Astros grid and connectivity file (in large field format) ....
Finished writing Astros grid file
Writing subElement types (if any) - appending mesh file
Writing Astros instruction file....
Warning: No constraints specified for case EigenAnalysis, assuming all constraints are applied!!!!
Writing analysis cards
Writing constraint cards--all constraints for each subcase
Writing material cards
Writing property cards
Writing coordinate system cards
==> Running mASTROS...
==> Running mASTROS post-analysis...
Reading Astros OUT file - extracting Eigen-Values!
Number of Eigen-Values = 10
Loading Eigen-Value = 1
Loading Eigen-Value = 2
Loading Eigen-Value = 3
Loading Eigen-Value = 4
Loading Eigen-Value = 5
Loading Eigen-Value = 6
Loading Eigen-Value = 7
Loading Eigen-Value = 8
Loading Eigen-Value = 9
Loading Eigen-Value = 10
--> Eigen-frequencies:
1 : 0.00145606
2 : 0.0014575
3 : 0.00332859
4 : 0.00333096
5 : 0.00445176
6 : 0.00445507
7 : 0.00894917
8 : 0.0089521
9 : 0.0110353
10: 0.0110413
real 0m39.915s
user 1m15.184s
sys 9m38.726s
+ status=0
+ set +x
=================================================
data/session09/1_astros_ModalCantilever.py passed (as expected)
=================================================
=================================================
2_astros_ModalSupport.py test;
+ python 2_astros_ModalSupport.py
+ tee -a /jenkins/workspace/ESP_RegCaps/7.8/CAPS/training/LINUX64/CAPS/training/2023/training.log
==> Loading geometry from file "../ESP/transport.csm"...
==> Running mASTROS pre-analysis...
MESSAGE:: Building wingOml
MESSAGE:: Building wingWaffle
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 6
Name = leftWingSkin, index = 1
Name = wingRib, index = 2
Name = riteWingSkin, index = 3
Name = wingSpar1, index = 4
Name = wingSpar2, index = 5
Name = ribSupport, index = 6
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 2
Name = wingSpar1, index = 1
Name = wingSpar2, index = 2
Getting surface mesh for body 1 (of 2)
Getting surface mesh for body 2 (of 2)
Body 1 (of 2)
Number of nodes = 832
Number of elements = 963
Number of triangle elements = 0
Number of quadrilateral elements = 963
Body 2 (of 2)
Number of nodes = 1
Number of elements = 0
Number of triangle elements = 0
Number of quadrilateral elements = 0
----------------------------
Total number of nodes = 833
Total number of elements = 963
Mapping Csys attributes ................
Number of unique Csys attributes = 2
Name = leftWingSkin, index = 1
Name = riteWingSkin, index = 2
Getting FEA coordinate systems.......
Number of coordinate systems - 2
Coordinate system name - leftWingSkin
Coordinate system name - riteWingSkin
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = ribRootPoint, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 2
Name = leftPointLoad, index = 1
Name = ritePointLoad, index = 2
Mapping capsBound attributes ................
Number of unique capsBound attributes = 4
Name = upperWing, index = 1
Name = lowerWing, index = 2
Name = leftTip, index = 3
Name = riteTip, index = 4
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 1
Name = ribRoot, index = 1
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsReference attributes ................
Number of unique capsReference attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 6
Name = leftWingSkin, index = 1
Name = wingRib, index = 2
Name = riteWingSkin, index = 3
Name = wingSpar1, index = 4
Name = wingSpar2, index = 5
Name = ribSupport, index = 6
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 832
Number of elements = 963
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 963
Setting FEA Data
Mesh for body = 1
Number of nodal coordinates = 1
Number of elements = 1
Elemental Nodes = 1
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 0
Combining multiple FEA meshes!
Combined Number of nodal coordinates = 833
Combined Number of elements = 964
Combined Elemental Nodes = 1
Combined Elemental Rods = 0
Combined Elemental Tria3 = 0
Combined Elemental Quad4 = 963
Aero_Reference value is NULL - No aero reference parameters set
Getting FEA materials.......
Number of materials - 2
Material name - Madeupium
Material name - Unobtainium
No "materialType" specified for Material tuple Unobtainium, defaulting to "Isotropic"
Done getting FEA materials
Getting FEA properties.......
Number of properties - 6
Property name - leftWingSkin
Property name - ribSupport
Property name - riteWingSkin
Property name - wingRib
Property name - wingSpar1
Property name - wingSpar2
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - ribRootPoint
No "constraintType" specified for Constraint tuple ribRootPoint, defaulting to "ZeroDisplacement"
No "groupName" specified for Constraint tuple ribRootPoint, going to use constraint name
Done getting FEA constraints
Getting FEA supports.......
Number of supports - 1
Support name - ribRootPoint
No "groupName" specified for Support tuple ribRootPoint, going to use support name
Done getting FEA supports
Getting FEA connections.......
Number of connection tuples - 1
Connection name - ribRoot
No "groupName" specified for Connection tuple ribRoot!
Looking for automatic connections from the use of capsConnectLink for ribRoot
9 automatic connections were made for capsConnect ribRoot (node id 833)
Done getting FEA connections
Load tuple is NULL - No loads applied
Optimization Control tuple is NULL - Default optimization control is used
Getting FEA optimization control.......
Done getting FEA Optimization Control
Design_Variable tuple is NULL - No design variables applied
Design_Constraint tuple is NULL - No design constraints applied
Getting FEA analyses.......
Number of analyses - 1
Analysis name - EigenAnalysis
Done getting FEA analyses
Writing Astros grid and connectivity file (in large field format) ....
Finished writing Astros grid file
Writing subElement types (if any) - appending mesh file
Writing connection cards - appending mesh file
Writing Astros instruction file....
Warning: No constraints specified for case EigenAnalysis, assuming all constraints are applied!!!!
Writing analysis cards
Writing constraint cards--all constraints for each subcase
Writing support cards
Writing material cards
Writing property cards
Writing coordinate system cards
==> Running mASTROS...
==> Running mASTROS post-analysis...
Reading Astros OUT file - extracting Eigen-Values!
Number of Eigen-Values = 10
Loading Eigen-Value = 1
Loading Eigen-Value = 2
Loading Eigen-Value = 3
Loading Eigen-Value = 4
Loading Eigen-Value = 5
Loading Eigen-Value = 6
Loading Eigen-Value = 7
Loading Eigen-Value = 8
Loading Eigen-Value = 9
Loading Eigen-Value = 10
--> Eigen-frequencies:
1 : 0.00141994
2 : 0.0017446
3 : 0.00322974
4 : 0.00324319
5 : 0.00432862
6 : 0.00512378
7 : 0.0087335
8 : 0.0100598
9 : 0.010673
10: 0.0107176
real 1m28.047s
user 2m32.628s
sys 18m48.682s
+ status=0
+ set +x
=================================================
data/session09/2_astros_ModalSupport.py passed (as expected)
=================================================
=================================================
3_astros_StaticCantilever.py test;
+ python 3_astros_StaticCantilever.py
+ tee -a /jenkins/workspace/ESP_RegCaps/7.8/CAPS/training/LINUX64/CAPS/training/2023/training.log
==> Loading geometry from file "../ESP/transport.csm"...
==> Running mASTROS pre-analysis...
MESSAGE:: Building wingOml
MESSAGE:: Building wingWaffle
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 5
Name = leftWingSkin, index = 1
Name = wingRib, index = 2
Name = riteWingSkin, index = 3
Name = wingSpar1, index = 4
Name = wingSpar2, index = 5
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 2
Name = wingSpar1, index = 1
Name = wingSpar2, index = 2
Getting surface mesh for body 1 (of 1)
Body 1 (of 1)
Number of nodes = 425
Number of elements = 482
Number of triangle elements = 0
Number of quadrilateral elements = 482
----------------------------
Total number of nodes = 425
Total number of elements = 482
Mapping Csys attributes ................
Number of unique Csys attributes = 2
Name = leftWingSkin, index = 1
Name = riteWingSkin, index = 2
Getting FEA coordinate systems.......
Number of coordinate systems - 2
Coordinate system name - leftWingSkin
Coordinate system name - riteWingSkin
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = rootConstraint, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 4
Name = leftWingSkin, index = 1
Name = riteWingSkin, index = 2
Name = leftPointLoad, index = 3
Name = ritePointLoad, index = 4
Mapping capsBound attributes ................
Number of unique capsBound attributes = 4
Name = upperWing, index = 1
Name = lowerWing, index = 2
Name = leftTip, index = 3
Name = riteTip, index = 4
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsReference attributes ................
Number of unique capsReference attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 5
Name = leftWingSkin, index = 1
Name = wingRib, index = 2
Name = riteWingSkin, index = 3
Name = wingSpar1, index = 4
Name = wingSpar2, index = 5
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 425
Number of elements = 482
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 482
Aero_Reference value is NULL - No aero reference parameters set
Getting FEA materials.......
Number of materials - 2
Material name - Madeupium
Material name - Unobtainium
No "materialType" specified for Material tuple Unobtainium, defaulting to "Isotropic"
Done getting FEA materials
Getting FEA properties.......
Number of properties - 5
Property name - leftWingSkin
Property name - riteWingSkin
Property name - wingRib
Property name - wingSpar1
Property name - wingSpar2
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - rootConstraint
No "constraintType" specified for Constraint tuple rootConstraint, defaulting to "ZeroDisplacement"
No "groupName" specified for Constraint tuple rootConstraint, going to use constraint name
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 2
Load name - leftPointLoad
No "groupName" specified for Load tuple leftPointLoad, going to use load name
Load name - ritePointLoad
No "groupName" specified for Load tuple ritePointLoad, going to use load name
Done getting FEA loads
Optimization Control tuple is NULL - Default optimization control is used
Getting FEA optimization control.......
Done getting FEA Optimization Control
Design_Variable tuple is NULL - No design variables applied
Design_Constraint tuple is NULL - No design constraints applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Astros grid and connectivity file (in large field format) ....
Finished writing Astros grid file
Writing subElement types (if any) - appending mesh file
Writing Astros instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint cards--each subcase individually
Writing load cards
Writing material cards
Writing property cards
Writing coordinate system cards
==> Running mASTROS...
==> Running mASTROS post-analysis...
--> Maximum displacements:
--> Tmax 238433.3403112283
--> T1max 16861.9
--> T2max 16414.9
--> T3max 237286.0
real 0m39.848s
user 1m13.569s
sys 4m34.457s
+ status=0
+ set +x
=================================================
data/session09/3_astros_StaticCantilever.py passed (as expected)
=================================================
=================================================
4_astros_Composite.py test;
+ python 4_astros_Composite.py
+ tee -a /jenkins/workspace/ESP_RegCaps/7.8/CAPS/training/LINUX64/CAPS/training/2023/training.log
==> Loading geometry from file "../ESP/transport.csm"...
MESSAGE:: Building wingOml
MESSAGE:: Building wingWaffle
==> Running mASTROS pre-analysis...
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 5
Name = leftWingSkin, index = 1
Name = wingRib, index = 2
Name = riteWingSkin, index = 3
Name = wingSpar1, index = 4
Name = wingSpar2, index = 5
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 2
Name = wingSpar1, index = 1
Name = wingSpar2, index = 2
Getting surface mesh for body 1 (of 1)
Body 1 (of 1)
Number of nodes = 425
Number of elements = 482
Number of triangle elements = 0
Number of quadrilateral elements = 482
----------------------------
Total number of nodes = 425
Total number of elements = 482
Mapping Csys attributes ................
Number of unique Csys attributes = 2
Name = leftWingSkin, index = 1
Name = riteWingSkin, index = 2
Getting FEA coordinate systems.......
Number of coordinate systems - 2
Coordinate system name - leftWingSkin
Coordinate system name - riteWingSkin
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = rootConstraint, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 4
Name = leftWingSkin, index = 1
Name = riteWingSkin, index = 2
Name = leftPointLoad, index = 3
Name = ritePointLoad, index = 4
Mapping capsBound attributes ................
Number of unique capsBound attributes = 4
Name = upperWing, index = 1
Name = lowerWing, index = 2
Name = leftTip, index = 3
Name = riteTip, index = 4
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsReference attributes ................
Number of unique capsReference attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 5
Name = leftWingSkin, index = 1
Name = wingRib, index = 2
Name = riteWingSkin, index = 3
Name = wingSpar1, index = 4
Name = wingSpar2, index = 5
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 425
Number of elements = 482
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 482
Aero_Reference value is NULL - No aero reference parameters set
Getting FEA materials.......
Number of materials - 2
Material name - Aluminum
No "materialType" specified for Material tuple Aluminum, defaulting to "Isotropic"
Material name - Graphite_epoxy
Done getting FEA materials
Getting FEA properties.......
Number of properties - 5
Property name - leftWingSkin
Property name - riteWingSkin
Property name - wingRib
Property name - wingSpar1
Property name - wingSpar2
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - rootConstraint
No "constraintType" specified for Constraint tuple rootConstraint, defaulting to "ZeroDisplacement"
No "groupName" specified for Constraint tuple rootConstraint, going to use constraint name
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 2
Load name - leftPointLoad
No "groupName" specified for Load tuple leftPointLoad, going to use load name
Load name - ritePointLoad
No "groupName" specified for Load tuple ritePointLoad, going to use load name
Done getting FEA loads
Optimization Control tuple is NULL - Default optimization control is used
Getting FEA optimization control.......
Done getting FEA Optimization Control
Design_Variable tuple is NULL - No design variables applied
Design_Constraint tuple is NULL - No design constraints applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Astros grid and connectivity file (in large field format) ....
Finished writing Astros grid file
Writing subElement types (if any) - appending mesh file
Writing Astros instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint cards--each subcase individually
Writing load cards
Writing material cards
Writing property cards
Writing coordinate system cards
==> Running mASTROS...
==> Running mASTROS post-analysis...
--> Maximum displacements:
--> Tmax 52594.60117638786
--> T1max 4359.68
--> T2max 3216.5
--> T3max 52322.2
real 0m38.498s
user 1m14.821s
sys 8m0.098s
+ status=0
+ set +x
=================================================
data/session09/4_astros_Composite.py passed (as expected)
=================================================
[1721799333.459039] [reynolds:3686917:0] ucp_context.c:1774 UCX WARN UCP version is incompatible, required: 1.16, actual: 1.12 (release 1)
=================================================
6_tacs_StaticCantilever.py test;
+ python 6_tacs_StaticCantilever.py
+ tee -a /jenkins/workspace/ESP_RegCaps/7.8/CAPS/training/LINUX64/CAPS/training/2023/training.log
[1721799335.271647] [reynolds:3687025:0] ucp_context.c:1774 UCX WARN UCP version is incompatible, required: 1.16, actual: 1.12 (release 1)
==> Loading geometry from file "../ESP/transport.csm"...
==> Running TACS pre-analysis...
MESSAGE:: Building wingOml
MESSAGE:: Building wingWaffle
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 5
Name = leftWingSkin, index = 1
Name = wingRib, index = 2
Name = riteWingSkin, index = 3
Name = wingSpar1, index = 4
Name = wingSpar2, index = 5
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 2
Name = wingSpar1, index = 1
Name = wingSpar2, index = 2
Getting surface mesh for body 1 (of 1)
Body 1 (of 1)
Number of nodes = 425
Number of elements = 482
Number of triangle elements = 0
Number of quadrilateral elements = 482
----------------------------
Total number of nodes = 425
Total number of elements = 482
Mapping Csys attributes ................
Number of unique Csys attributes = 2
Name = leftWingSkin, index = 1
Name = riteWingSkin, index = 2
Getting FEA coordinate systems.......
Number of coordinate systems - 2
Coordinate system name - leftWingSkin
Coordinate system name - riteWingSkin
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = rootConstraint, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 4
Name = leftWingSkin, index = 1
Name = riteWingSkin, index = 2
Name = leftPointLoad, index = 3
Name = ritePointLoad, index = 4
Mapping capsBound attributes ................
Number of unique capsBound attributes = 4
Name = upperWing, index = 1
Name = lowerWing, index = 2
Name = leftTip, index = 3
Name = riteTip, index = 4
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsReference attributes ................
Number of unique capsReference attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 5
Name = leftWingSkin, index = 1
Name = wingRib, index = 2
Name = riteWingSkin, index = 3
Name = wingSpar1, index = 4
Name = wingSpar2, index = 5
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 425
Number of elements = 482
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 482
Getting FEA materials.......
Number of materials - 1
Material name - aluminum
Done getting FEA materials
Getting FEA properties.......
Number of properties - 5
Property name - leftWingSkin
Property name - riteWingSkin
Property name - wingRib
Property name - wingSpar1
Property name - wingSpar2
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - rootConstraint
No "groupName" specified for Constraint tuple rootConstraint, going to use constraint name
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 2
Load name - leftWingSkin
No "groupName" specified for Load tuple leftWingSkin, going to use load name
Load name - riteWingSkin
No "groupName" specified for Load tuple riteWingSkin, going to use load name
Done getting FEA loads
Design_Variable tuple is NULL - No design variables applied
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in large field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing coordinate system cards
[0] Creating TACSAssembler with numOwnedNodes = 425 numElements = 482
[0] BCSRMat: ILU(1000) Input fill ratio 20.00, actual fill ratio: 2.84, nnz(ILU) = 11729
==> Running TACS...
==> Running TACS post-analysis...
Tacs Analysis Outputs...
functional mass = 511406.7093890694
functional ks_vmfailure = 0.019135051727262598
real 0m40.568s
user 1m14.332s
sys 5m5.340s
+ status=0
+ set +x
=================================================
data/session09/6_tacs_StaticCantilever.py passed (as expected)
=================================================
=================================================
7_tacs_sizing.py test;
+ python 7_tacs_sizing.py
+ tee -a /jenkins/workspace/ESP_RegCaps/7.8/CAPS/training/LINUX64/CAPS/training/2023/training.log
[1721799375.856057] [reynolds:3687624:0] ucp_context.c:1774 UCX WARN UCP version is incompatible, required: 1.16, actual: 1.12 (release 1)
==> Loading geometry from file "../ESP/transport.csm"...
==> Starting optimization...
MESSAGE:: Building wingOml
MESSAGE:: Building wingWaffle
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 5
Name = leftWingSkin, index = 1
Name = wingRib, index = 2
Name = riteWingSkin, index = 3
Name = wingSpar1, index = 4
Name = wingSpar2, index = 5
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 2
Name = wingSpar1, index = 1
Name = wingSpar2, index = 2
Getting surface mesh for body 1 (of 1)
Body 1 (of 1)
Number of nodes = 3852
Number of elements = 4061
Number of triangle elements = 0
Number of quadrilateral elements = 4061
----------------------------
Total number of nodes = 3852
Total number of elements = 4061
Mapping Csys attributes ................
Number of unique Csys attributes = 2
Name = leftWingSkin, index = 1
Name = riteWingSkin, index = 2
Getting FEA coordinate systems.......
Number of coordinate systems - 2
Coordinate system name - leftWingSkin
Coordinate system name - riteWingSkin
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = rootConstraint, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 4
Name = leftWingSkin, index = 1
Name = riteWingSkin, index = 2
Name = leftPointLoad, index = 3
Name = ritePointLoad, index = 4
Mapping capsBound attributes ................
Number of unique capsBound attributes = 4
Name = upperWing, index = 1
Name = lowerWing, index = 2
Name = leftTip, index = 3
Name = riteTip, index = 4
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsReference attributes ................
Number of unique capsReference attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 5
Name = leftWingSkin, index = 1
Name = wingRib, index = 2
Name = riteWingSkin, index = 3
Name = wingSpar1, index = 4
Name = wingSpar2, index = 5
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 3852
Number of elements = 4061
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 4061
Getting FEA materials.......
Number of materials - 1
Material name - aluminum
Done getting FEA materials
Getting FEA properties.......
Number of properties - 5
Property name - leftWingSkin
Property name - riteWingSkin
Property name - wingRib
Property name - wingSpar1
Property name - wingSpar2
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - rootConstraint
No "groupName" specified for Constraint tuple rootConstraint, going to use constraint name
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 2
Load name - leftWingSkin
No "groupName" specified for Load tuple leftWingSkin, going to use load name
Load name - riteWingSkin
No "groupName" specified for Load tuple riteWingSkin, going to use load name
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 3
Design_Variable name - ribThk
Design_Variable name - skinThk
Design_Variable name - sparThk
Design_Variable_Relation name - relLeftSkin
Design_Variable_Relation name - relRib
Design_Variable_Relation name - relRiteSkin
Design_Variable_Relation name - relSpar
Number of design variable relations - 4
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in large field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing coordinate system cards
Writing design variable cards
Writing design variable relation cards
[0] Creating TACSAssembler with numOwnedNodes = 3852 numElements = 4061
[0] BCSRMat: ILU(1000) Input fill ratio 20.00, actual fill ratio: 5.80, nnz(ILU) = 208272
[0] BCSRMat: ILU(1000) Input fill ratio 20.00, actual fill ratio: 5.80, nnz(ILU) = 208272
/jenkins/workspace/ESP_RegCaps/7.8/CAPS/training/LINUX64/CAPS/training/2023/data/session09/7_tacs_sizing.py:144: DeprecationWarning: Conversion of an array with ndim > 0 to a scalar is deprecated, and will error in future. Ensure you extract a single element from your array before performing this operation. (Deprecated NumPy 1.25.)
xarray[ithick] = float(inputs[thick_dv])
--> ribThk [0.05]
--> skinThk [0.003]
--> sparThk [0.1]
--> mass [351348.85843759]
--> ks_vmfailure [0.18465374]
--> mass [351348.85843759]
--> ks_vmfailure [0.18465374]
--> mass ribThk [[2050883.76812598]]
--> mass skinThk [[10032748.65486045]]
--> mass sparThk [[1314431.32692686]]
--> ks_vmfailure ribThk [[-0.00701607]]
--> ks_vmfailure skinThk [[-0.7773577]]
--> ks_vmfailure sparThk [[-0.00419852]]
[0] BCSRMat: ILU(1000) Input fill ratio 20.00, actual fill ratio: 5.80, nnz(ILU) = 208272
--> ribThk [0.001]
--> skinThk [0.00739074]
--> sparThk [0.001]
--> mass [164778.06693791]
--> ks_vmfailure [0.18458271]
--> mass ribThk [[2050883.76812598]]
--> mass skinThk [[10032748.65486045]]
--> mass sparThk [[1314431.32692686]]
--> ks_vmfailure ribThk [[-0.27193779]]
--> ks_vmfailure skinThk [[-0.30939955]]
--> ks_vmfailure sparThk [[-0.20978604]]
[0] BCSRMat: ILU(1000) Input fill ratio 20.00, actual fill ratio: 5.80, nnz(ILU) = 208272
--> ribThk [0.001]
--> skinThk [0.001]
--> sparThk [0.02273644]
--> mass [129232.41451658]
--> ks_vmfailure [0.20239501]
[0] BCSRMat: ILU(1000) Input fill ratio 20.00, actual fill ratio: 5.80, nnz(ILU) = 208272
--> ribThk [0.001]
--> skinThk [0.00647627]
--> sparThk [0.00411034]
--> mass [159691.72857107]
--> ks_vmfailure [0.18468723]
--> mass ribThk [[2050883.76812598]]
--> mass skinThk [[10032748.65486045]]
--> mass sparThk [[1314431.32692686]]
--> ks_vmfailure ribThk [[-0.28428468]]
--> ks_vmfailure skinThk [[-0.36623706]]
--> ks_vmfailure sparThk [[-0.04561164]]
[0] BCSRMat: ILU(1000) Input fill ratio 20.00, actual fill ratio: 5.80, nnz(ILU) = 208272
--> ribThk [0.01797054]
--> skinThk [0.001]
--> sparThk [0.0012247]
--> mass [135761.31369163]
--> ks_vmfailure [0.20097432]
[0] BCSRMat: ILU(1000) Input fill ratio 20.00, actual fill ratio: 5.80, nnz(ILU) = 208272
--> ribThk [0.00336292]
--> skinThk [0.00571377]
--> sparThk [0.00370855]
--> mass [156359.73960161]
--> ks_vmfailure [0.18476613]
--> mass ribThk [[2050883.76812598]]
--> mass skinThk [[10032748.65486045]]
--> mass sparThk [[1314431.32692686]]
--> ks_vmfailure ribThk [[-0.04724024]]
--> ks_vmfailure skinThk [[-0.42968566]]
--> ks_vmfailure sparThk [[-0.05558717]]
[0] BCSRMat: ILU(1000) Input fill ratio 20.00, actual fill ratio: 5.80, nnz(ILU) = 208272
--> ribThk [0.00375419]
--> skinThk [0.0118629]
--> sparThk [0.00560564]
--> mass [221348.4685629]
--> ks_vmfailure [0.18335024]
[0] BCSRMat: ILU(1000) Input fill ratio 20.00, actual fill ratio: 5.80, nnz(ILU) = 208272
--> ribThk [0.00340205]
--> skinThk [0.00632869]
--> sparThk [0.00389826]
--> mass [162858.61249774]
--> ks_vmfailure [0.18451389]
[0] BCSRMat: ILU(1000) Input fill ratio 20.00, actual fill ratio: 5.80, nnz(ILU) = 208272
--> ribThk [0.0033671]
--> skinThk [0.00577947]
--> sparThk [0.00372882]
--> mass [157054.09505636]
--> ks_vmfailure [0.18473688]
--> mass ribThk [[2050883.76812598]]
--> mass skinThk [[10032748.65486045]]
--> mass sparThk [[1314431.32692686]]
--> ks_vmfailure ribThk [[-0.04660765]]
--> ks_vmfailure skinThk [[-0.4208561]]
--> ks_vmfailure sparThk [[-0.05458697]]
[0] BCSRMat: ILU(1000) Input fill ratio 20.00, actual fill ratio: 5.80, nnz(ILU) = 208272
--> ribThk [0.001]
--> skinThk [0.0114244]
--> sparThk [0.01236645]
--> mass [220187.17380918]
--> ks_vmfailure [0.18349008]
--> mass ribThk [[2050883.76812598]]
--> mass skinThk [[10032748.65486045]]
--> mass sparThk [[1314431.32692686]]
--> ks_vmfailure ribThk [[-0.2237631]]
--> ks_vmfailure skinThk [[-0.11542907]]
--> ks_vmfailure sparThk [[-0.00924893]]
[0] BCSRMat: ILU(1000) Input fill ratio 20.00, actual fill ratio: 5.80, nnz(ILU) = 208272
--> ribThk [0.00726772]
--> skinThk [0.01192034]
--> sparThk [0.01564751]
--> mass [242329.88496499]
--> ks_vmfailure [0.18318718]
[0] BCSRMat: ILU(1000) Input fill ratio 20.00, actual fill ratio: 5.80, nnz(ILU) = 208272
--> ribThk [0.00374643]
--> skinThk [0.01164171]
--> sparThk [0.01380417]
--> mass [229889.80121865]
--> ks_vmfailure [0.18327675]
[0] BCSRMat: ILU(1000) Input fill ratio 20.00, actual fill ratio: 5.80, nnz(ILU) = 208272
--> ribThk [0.0024241]
--> skinThk [0.01153708]
--> sparThk [0.01311195]
--> mass [225218.27320809]
--> ks_vmfailure [0.18333401]
--> mass ribThk [[2050883.76812598]]
--> mass skinThk [[10032748.65486045]]
--> mass sparThk [[1314431.32692686]]
--> ks_vmfailure ribThk [[-0.04342338]]
--> ks_vmfailure skinThk [[-0.10932276]]
--> ks_vmfailure sparThk [[-0.00862543]]
[0] BCSRMat: ILU(1000) Input fill ratio 20.00, actual fill ratio: 5.80, nnz(ILU) = 208272
--> ribThk [0.00273423]
--> skinThk [0.02300858]
--> sparThk [0.0208162]
--> mass [351071.64820344]
--> ks_vmfailure [0.18265072]
[0] BCSRMat: ILU(1000) Input fill ratio 20.00, actual fill ratio: 5.80, nnz(ILU) = 208272
--> ribThk [0.00246133]
--> skinThk [0.01291395]
--> sparThk [0.01403666]
--> mass [240323.86265565]
--> ks_vmfailure [0.18319035]
--> mass ribThk [[2050883.76812598]]
--> mass skinThk [[10032748.65486045]]
--> mass sparThk [[1314431.32692686]]
--> ks_vmfailure ribThk [[-0.04030186]]
--> ks_vmfailure skinThk [[-0.08766022]]
--> ks_vmfailure sparThk [[-0.00725048]]
[0] BCSRMat: ILU(1000) Input fill ratio 20.00, actual fill ratio: 5.80, nnz(ILU) = 208272
--> ribThk [0.00615236]
--> skinThk [0.02577931]
--> sparThk [0.00214914]
--> mass [361343.30237147]
--> ks_vmfailure [0.18263733]
--> mass ribThk [[2050883.76812598]]
--> mass skinThk [[10032748.65486045]]
--> mass sparThk [[1314431.32692686]]
--> ks_vmfailure ribThk [[-0.00640621]]
--> ks_vmfailure skinThk [[-0.02501964]]
--> ks_vmfailure sparThk [[-0.04131364]]
[0] BCSRMat: ILU(1000) Input fill ratio 20.00, actual fill ratio: 5.80, nnz(ILU) = 208272
--> ribThk [0.00713229]
--> skinThk [0.02677305]
--> sparThk [0.01682207]
--> mass [392609.48008805]
--> ks_vmfailure [0.18251681]
[0] BCSRMat: ILU(1000) Input fill ratio 20.00, actual fill ratio: 5.80, nnz(ILU) = 208272
--> ribThk [0.00663017]
--> skinThk [0.02626385]
--> sparThk [0.00930362]
--> mass [376588.6096398]
--> ks_vmfailure [0.18255199]
[0] BCSRMat: ILU(1000) Input fill ratio 20.00, actual fill ratio: 5.80, nnz(ILU) = 208272
--> ribThk [0.00641281]
--> skinThk [0.02604342]
--> sparThk [0.00604887]
--> mass [369653.14723749]
--> ks_vmfailure [0.18257185]
--> mass ribThk [[2050883.76812598]]
--> mass skinThk [[10032748.65486045]]
--> mass sparThk [[1314431.32692686]]
--> ks_vmfailure ribThk [[-0.00605012]]
--> ks_vmfailure skinThk [[-0.02434576]]
--> ks_vmfailure sparThk [[-0.00555071]]
[0] BCSRMat: ILU(1000) Input fill ratio 20.00, actual fill ratio: 5.80, nnz(ILU) = 208272
--> ribThk [0.00973722]
--> skinThk [0.04835412]
--> sparThk [0.00759187]
--> mass [602336.92628688]
--> ks_vmfailure [0.18225672]
[0] BCSRMat: ILU(1000) Input fill ratio 20.00, actual fill ratio: 5.80, nnz(ILU) = 208272
--> ribThk [0.00752074]
--> skinThk [0.03347893]
--> sparThk [0.00656311]
--> mass [447199.86601843]
--> ks_vmfailure [0.18242234]
--> mass ribThk [[2050883.76812598]]
--> mass skinThk [[10032748.65486045]]
--> mass sparThk [[1314431.32692686]]
--> ks_vmfailure ribThk [[-0.00423674]]
--> ks_vmfailure skinThk [[-0.01486487]]
--> ks_vmfailure sparThk [[-0.00451752]]
[0] BCSRMat: ILU(1000) Input fill ratio 20.00, actual fill ratio: 5.80, nnz(ILU) = 208272
--> ribThk [0.01240421]
--> skinThk [0.05849074]
--> sparThk [0.01317188]
--> mass [716839.28219105]
--> ks_vmfailure [0.18217977]
--> mass ribThk [[2050883.76812598]]
--> mass skinThk [[10032748.65486045]]
--> mass sparThk [[1314431.32692686]]
--> ks_vmfailure ribThk [[-0.00154607]]
--> ks_vmfailure skinThk [[-0.00498159]]
--> ks_vmfailure sparThk [[-0.00115577]]
[0] BCSRMat: ILU(1000) Input fill ratio 20.00, actual fill ratio: 5.80, nnz(ILU) = 208272
--> ribThk [0.01929413]
--> skinThk [0.09078534]
--> sparThk [0.02029655]
--> mass [1064338.2244386]
--> ks_vmfailure [0.18206339]
--> mass ribThk [[2050883.76812598]]
--> mass skinThk [[10032748.65486045]]
--> mass sparThk [[1314431.32692686]]
--> ks_vmfailure ribThk [[-0.00064649]]
--> ks_vmfailure skinThk [[-0.00208486]]
--> ks_vmfailure sparThk [[-0.00048512]]
[0] BCSRMat: ILU(1000) Input fill ratio 20.00, actual fill ratio: 5.80, nnz(ILU) = 208272
--> ribThk [0.02545588]
--> skinThk [0.11766684]
--> sparThk [0.0272289]
--> mass [1355782.71803893]
--> ks_vmfailure [0.18201458]
--> mass ribThk [[2050883.76812598]]
--> mass skinThk [[10032748.65486045]]
--> mass sparThk [[1314431.32692686]]
--> ks_vmfailure ribThk [[-0.0003768]]
--> ks_vmfailure skinThk [[-0.00124124]]
--> ks_vmfailure sparThk [[-0.00027327]]
[0] BCSRMat: ILU(1000) Input fill ratio 20.00, actual fill ratio: 5.80, nnz(ILU) = 208272
--> ribThk [0.02816251]
--> skinThk [0.1278486]
--> sparThk [0.0306149]
--> mass [1467935.35100916]
--> ks_vmfailure [0.1820012]
--> mass ribThk [[2050883.76812598]]
--> mass skinThk [[10032748.65486045]]
--> mass sparThk [[1314431.32692686]]
--> ks_vmfailure ribThk [[-0.00031099]]
--> ks_vmfailure skinThk [[-0.00105064]]
--> ks_vmfailure sparThk [[-0.00021913]]
[0] BCSRMat: ILU(1000) Input fill ratio 20.00, actual fill ratio: 5.80, nnz(ILU) = 208272
--> ribThk [0.02874643]
--> skinThk [0.12860074]
--> sparThk [0.03166047]
--> mass [1478053.27821022]
--> ks_vmfailure [0.18200001]
--> mass ribThk [[2050883.76812598]]
--> mass skinThk [[10032748.65486045]]
--> mass sparThk [[1314431.32692686]]
--> ks_vmfailure ribThk [[-0.00030043]]
--> ks_vmfailure skinThk [[-0.00103744]]
--> ks_vmfailure sparThk [[-0.00020726]]
[0] BCSRMat: ILU(1000) Input fill ratio 20.00, actual fill ratio: 5.80, nnz(ILU) = 208272
--> ribThk [0.02995585]
--> skinThk [0.12773278]
--> sparThk [0.03432141]
--> mass [1475323.27729737]
--> ks_vmfailure [0.18200005]
--> mass ribThk [[2050883.76812598]]
--> mass skinThk [[10032748.65486045]]
--> mass sparThk [[1314431.32692686]]
--> ks_vmfailure ribThk [[-0.00028252]]
--> ks_vmfailure skinThk [[-0.00104812]]
--> ks_vmfailure sparThk [[-0.00018401]]
[0] BCSRMat: ILU(1000) Input fill ratio 20.00, actual fill ratio: 5.80, nnz(ILU) = 208272
--> ribThk [0.03300208]
--> skinThk [0.1258291]
--> sparThk [0.04074924]
--> mass [1470920.55147938]
--> ks_vmfailure [0.18200021]
--> mass ribThk [[2050883.76812598]]
--> mass skinThk [[10032748.65486045]]
--> mass sparThk [[1314431.32692686]]
--> ks_vmfailure ribThk [[-0.00024502]]
--> ks_vmfailure skinThk [[-0.00107038]]
--> ks_vmfailure sparThk [[-0.00014848]]
[0] BCSRMat: ILU(1000) Input fill ratio 20.00, actual fill ratio: 5.80, nnz(ILU) = 208272
--> ribThk [0.03417054]
--> skinThk [0.12543857]
--> sparThk [0.04303491]
--> mass [1472403.17570301]
--> ks_vmfailure [0.18200002]
--> mass ribThk [[2050883.76812598]]
--> mass skinThk [[10032748.65486045]]
--> mass sparThk [[1314431.32692686]]
--> ks_vmfailure ribThk [[-0.00023279]]
--> ks_vmfailure skinThk [[-0.00107335]]
--> ks_vmfailure sparThk [[-0.00014019]]
[0] BCSRMat: ILU(1000) Input fill ratio 20.00, actual fill ratio: 5.80, nnz(ILU) = 208272
--> ribThk [0.0346654]
--> skinThk [0.12523006]
--> sparThk [0.04393554]
--> mass [1472509.96840742]
--> ks_vmfailure [0.182]
--> mass ribThk [[2050883.76812598]]
--> mass skinThk [[10032748.65486045]]
--> mass sparThk [[1314431.32692686]]
--> ks_vmfailure ribThk [[-0.00022797]]
--> ks_vmfailure skinThk [[-0.00107536]]
--> ks_vmfailure sparThk [[-0.00013746]]
[0] BCSRMat: ILU(1000) Input fill ratio 20.00, actual fill ratio: 5.80, nnz(ILU) = 208272
--> ribThk [0.03477346]
--> skinThk [0.12519386]
--> sparThk [0.04405885]
--> mass [1472530.51739648]
--> ks_vmfailure [0.182]
--> mass ribThk [[2050883.76812598]]
--> mass skinThk [[10032748.65486045]]
--> mass sparThk [[1314431.32692686]]
--> ks_vmfailure ribThk [[-0.00022693]]
--> ks_vmfailure skinThk [[-0.00107573]]
--> ks_vmfailure sparThk [[-0.00013712]]
[0] BCSRMat: ILU(1000) Input fill ratio 20.00, actual fill ratio: 5.80, nnz(ILU) = 208272
--> ribThk [0.03499382]
--> skinThk [0.12513458]
--> sparThk [0.0441599]
--> mass [1472520.46425353]
--> ks_vmfailure [0.182]
--> mass ribThk [[2050883.76812598]]
--> mass skinThk [[10032748.65486045]]
--> mass sparThk [[1314431.32692686]]
--> ks_vmfailure ribThk [[-0.00022479]]
--> ks_vmfailure skinThk [[-0.00107642]]
--> ks_vmfailure sparThk [[-0.00013689]]
[0] BCSRMat: ILU(1000) Input fill ratio 20.00, actual fill ratio: 5.80, nnz(ILU) = 208272
--> ribThk [0.035286]
--> skinThk [0.12508834]
--> sparThk [0.04404567]
--> mass [1472505.61302732]
--> ks_vmfailure [0.182]
--> mass ribThk [[2050883.76812598]]
--> mass skinThk [[10032748.65486045]]
--> mass sparThk [[1314431.32692686]]
--> ks_vmfailure ribThk [[-0.00022196]]
--> ks_vmfailure skinThk [[-0.00107708]]
--> ks_vmfailure sparThk [[-0.00013735]]
[0] BCSRMat: ILU(1000) Input fill ratio 20.00, actual fill ratio: 5.80, nnz(ILU) = 208272
--> ribThk [0.0355475]
--> skinThk [0.12509498]
--> sparThk [0.0435743]
--> mass [1472488.97921078]
--> ks_vmfailure [0.182]
--> mass ribThk [[2050883.76812598]]
--> mass skinThk [[10032748.65486045]]
--> mass sparThk [[1314431.32692686]]
--> ks_vmfailure ribThk [[-0.0002194]]
--> ks_vmfailure skinThk [[-0.0010773]]
--> ks_vmfailure sparThk [[-0.00013892]]
[0] BCSRMat: ILU(1000) Input fill ratio 20.00, actual fill ratio: 5.80, nnz(ILU) = 208272
--> ribThk [0.03557543]
--> skinThk [0.12515335]
--> sparThk [0.04308254]
--> mass [1472485.56114736]
--> ks_vmfailure [0.182]
--> mass ribThk [[2050883.76812598]]
--> mass skinThk [[10032748.65486045]]
--> mass sparThk [[1314431.32692686]]
--> ks_vmfailure ribThk [[-0.00021902]]
--> ks_vmfailure skinThk [[-0.00107687]]
--> ks_vmfailure sparThk [[-0.00014054]]
[0] BCSRMat: ILU(1000) Input fill ratio 20.00, actual fill ratio: 5.80, nnz(ILU) = 208272
--> ribThk [0.03549811]
--> skinThk [0.12518987]
--> sparThk [0.04292621]
--> mass [1472487.80119021]
--> ks_vmfailure [0.182]
--> mass ribThk [[2050883.76812598]]
--> mass skinThk [[10032748.65486045]]
--> mass sparThk [[1314431.32692686]]
--> ks_vmfailure ribThk [[-0.0002197]]
--> ks_vmfailure skinThk [[-0.00107651]]
--> ks_vmfailure sparThk [[-0.00014103]]
[0] BCSRMat: ILU(1000) Input fill ratio 20.00, actual fill ratio: 5.80, nnz(ILU) = 208272
--> ribThk [0.03546495]
--> skinThk [0.12519741]
--> sparThk [0.04292079]
--> mass [1472488.3611772]
--> ks_vmfailure [0.182]
--> mass ribThk [[2050883.76812598]]
--> mass skinThk [[10032748.65486045]]
--> mass sparThk [[1314431.32692686]]
--> ks_vmfailure ribThk [[-0.00022001]]
--> ks_vmfailure skinThk [[-0.00107642]]
--> ks_vmfailure sparThk [[-0.00014104]]
[0] BCSRMat: ILU(1000) Input fill ratio 20.00, actual fill ratio: 5.80, nnz(ILU) = 208272
--> ribThk [0.03546229]
--> skinThk [0.12519748]
--> sparThk [0.04292444]
--> mass [1472488.41090652]
--> ks_vmfailure [0.182]
[0] BCSRMat: ILU(1000) Input fill ratio 20.00, actual fill ratio: 5.80, nnz(ILU) = 208272
--> ribThk [0.03546377]
--> skinThk [0.12519744]
--> sparThk [0.04292241]
--> mass [1472488.38326913]
--> ks_vmfailure [0.182]
--> mass ribThk [[2050883.76812598]]
--> mass skinThk [[10032748.65486045]]
--> mass sparThk [[1314431.32692686]]
--> ks_vmfailure ribThk [[-0.00022002]]
--> ks_vmfailure skinThk [[-0.00107641]]
--> ks_vmfailure sparThk [[-0.00014103]]
[0] BCSRMat: ILU(1000) Input fill ratio 20.00, actual fill ratio: 5.80, nnz(ILU) = 208272
--> ribThk [0.03546228]
--> skinThk [0.12519745]
--> sparThk [0.0429247]
--> mass [1472488.41133957]
--> ks_vmfailure [0.182]
[0] BCSRMat: ILU(1000) Input fill ratio 20.00, actual fill ratio: 5.80, nnz(ILU) = 208272
--> ribThk [0.03546335]
--> skinThk [0.12519744]
--> sparThk [0.04292305]
--> mass [1472488.3910861]
--> ks_vmfailure [0.182]
[0] BCSRMat: ILU(1000) Input fill ratio 20.00, actual fill ratio: 5.80, nnz(ILU) = 208272
--> ribThk [0.03546373]
--> skinThk [0.12519744]
--> sparThk [0.04292248]
--> mass [1472488.38405081]
--> ks_vmfailure [0.182]
[0] BCSRMat: ILU(1000) Input fill ratio 20.00, actual fill ratio: 5.80, nnz(ILU) = 208272
--> ribThk [0.03546376]
--> skinThk [0.12519744]
--> sparThk [0.04292242]
--> mass [1472488.38334728]
--> ks_vmfailure [0.182]
Optimization terminated successfully (Exit mode 0)
Current function value: 4.207109666706528
Iterations: 28
Function evaluations: 43
Gradient evaluations: 28
Optimization Complete
-----------------------------------
==> Optimized value:
--> ribThk [0.03546376]
--> skinThk [0.12519744]
--> sparThk [0.04292242]
real 3m39.632s
user 4m48.646s
sys 4m45.401s
+ status=0
+ set +x
=================================================
data/session09/7_tacs_sizing.py passed (as expected)
=================================================
=================================================
2_aeroelastic_Iterative_SU2_Astros.py test;
+ python 2_aeroelastic_Iterative_SU2_Astros.py
+ tee -a /jenkins/workspace/ESP_RegCaps/7.8/CAPS/training/LINUX64/CAPS/training/2023/training.log
MESSAGE:: Building wingOml
MESSAGE:: Building wingWaffle
==> Running SU2 pre-analysis...
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Wing, index = 1
Name = Farfield, index = 2
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 3
Name = leftWing, index = 1
Name = riteWing, index = 2
Name = Farfield, index = 3
Getting mesh sizing parameters
Mesh sizing name - Farfield
Mesh sizing name - leftWing
Mesh sizing name - riteWing
Done getting mesh sizing parameters
AFLR2 : ---------------------------------------
AFLR2 : AFLR2 LIBRARY
AFLR2 : ADVANCING-FRONT/LOCAL-RECONNECTION
AFLR2 : TRIA/QUAD GRID GENERATOR
AFLR2 : Version Number 9.18.1
AFLR2 : Version Date 06/11/24 @ 05:52PM
AFLR2 : Compile OS Linux 3.10.0-1160.88.1.el7.x86_64 x86_64
AFLR2 : Compile Date 06/11/24 @ 06:33PM
AFLR2 : Copyright 1994-2021, D.L. Marcum
AFLR2 : ---------------------------------------
AFLR4 : ---------------------------------------
AFLR4 : AFLR4 LIBRARY
AFLR4 : ADVANCING-FRONT/LOCAL-RECONNECTION
AFLR4 : TRIA/QUAD SURFACE GRID GENERATOR
AFLR4 : Version Number 11.5.15
AFLR4 : Version Date 07/19/24 @ 07:04PM
AFLR4 : Compile OS Linux 3.10.0-1160.88.1.el7.x86_64 x86_64
AFLR4 : Compile Date 07/19/24 @ 07:42PM
AFLR4 : Copyright 1994-2021, D.L. Marcum
AFLR4 : ---------------------------------------
EGADS : ---------------------------------------
EGADS : Engineering Geometry Aircraft Design System
EGADS : Version 1.26
EGADS : OpenCASCADE Version 7.8.1
EGADS : ---------------------------------------
EGADS : EGADS CAD Geometry Setup
EGADS : Model has 2 Active Bodies
EGADS : Body 0 is a SolidBody
EGADS : Body 0 has 1 Shells
EGADS : Body 0 has 10 Faces
EGADS : Body 0 has 18 Edges
EGADS : Body 0 has 10 Loops
EGADS : Body 0 has 10 Nodes
EGADS : Body 1 is a SolidBody
EGADS : Body 1 has 1 Shells
EGADS : Body 1 has 6 Faces
EGADS : Body 1 has 12 Edges
EGADS : Body 1 has 6 Loops
EGADS : Body 1 has 8 Nodes
EGADS : Check Grid BCs
EGADS : Grid BCs are OK
EGADS : Face Neighbor-Faces Information
EGADS : QC = Face Quad Combination Flag
EGADS : IER = Face Isolated Edge Refinement Flag
EGADS : ER = Face Edge Refinement Factor
EGADS : Not applicable for Faces with a FarField Grid BC.
EGADS : SF = Face Scale Factor
EGADS : Not applicable for Faces with a FarField Grid BC.
EGADS : Face Body QC IER ER Scale Neighbor
EGADS : ID Active ID Flag Flag Weight Factor Faces
EGADS : 1 Yes 0 0 1 1 1 2 3 6
EGADS : 2 Yes 0 0 1 1 1 1 4 5
EGADS : 3 Yes 0 0 1 1 1 1 4 8
EGADS : 4 Yes 0 0 1 1 1 2 3 5
EGADS : 5 Yes 0 0 1 1 1 2 4
EGADS : 6 Yes 0 0 1 1 1 1 7 8
EGADS : 7 Yes 0 0 1 1 1 6 9 10
EGADS : 8 Yes 0 0 1 1 1 3 6 9
EGADS : 9 Yes 0 0 1 1 1 7 8 10
EGADS : 10 Yes 0 0 1 1 1 7 9
EGADS : 11 Yes 1 0 1 NA NA 13 14 15 16
EGADS : 12 Yes 1 0 1 NA NA 13 14 15 16
EGADS : 13 Yes 1 0 1 NA NA 11 12 15 16
EGADS : 14 Yes 1 0 1 NA NA 11 12 15 16
EGADS : 15 Yes 1 0 1 NA NA 11 12 13 14
EGADS : 16 Yes 1 0 1 NA NA 11 12 13 14
EGADS : Face Edges Information
EGADS : Face Edges
EGADS : 1 -1 2 3 -4
EGADS : 2 -5 4 6 -7
EGADS : 3 -3 8 1 -9
EGADS : 4 -6 9 5 -10
EGADS : 5 7 10
EGADS : 6 11 13 -12 -2
EGADS : 7 14 16 -15 -13
EGADS : 8 12 17 -11 -8
EGADS : 9 15 18 -14 -17
EGADS : 10 -16 -18
EGADS : 11 19 20 -21 -22
EGADS : 12 -23 26 25 -24
EGADS : 13 27 23 -28 -19
EGADS : 14 -29 21 30 -25
EGADS : 15 22 29 -26 -27
EGADS : 16 -20 28 24 -30
EGADS : Face Loops Information
EGADS : Face Loops
EGADS : 1 1
EGADS : 2 2
EGADS : 3 3
EGADS : 4 4
EGADS : 5 5
EGADS : 6 6
EGADS : 7 7
EGADS : 8 8
EGADS : 9 9
EGADS : 10 10
EGADS : 11 11
EGADS : 12 12
EGADS : 13 13
EGADS : 14 14
EGADS : 15 15
EGADS : 16 16
EGADS : Loop Edges Information
EGADS : Loop Active Edges
EGADS : 1 Yes -1 2 3 -4
EGADS : 2 Yes -5 4 6 -7
EGADS : 3 Yes -3 8 1 -9
EGADS : 4 Yes -6 9 5 -10
EGADS : 5 Yes 7 10
EGADS : 6 Yes 11 13 -12 -2
EGADS : 7 Yes 14 16 -15 -13
EGADS : 8 Yes 12 17 -11 -8
EGADS : 9 Yes 15 18 -14 -17
EGADS : 10 Yes -16 -18
EGADS : 11 Yes 19 20 -21 -22
EGADS : 12 Yes -23 26 25 -24
EGADS : 13 Yes 27 23 -28 -19
EGADS : 14 Yes -29 21 30 -25
EGADS : 15 Yes 22 29 -26 -27
EGADS : 16 Yes -20 28 24 -30
EGADS : Edge Node, Scale Factor, and Neighbor-Faces Information
EGADS : ESF = Edge Scale Factor
EGADS : Not applicable for DEGENERATE Edges or Edges with a FarField
EGADS : Grid BC Neighbor Face.
EGADS : Neighbor
EGADS : Edge Body Active Node1 Node2 ESF Faces
EGADS : 1 0 Yes 1 2 1 1 3
EGADS : 2 0 Yes 1 3 1 1 6
EGADS : 3 0 Yes 3 4 1 1 3
EGADS : 4 0 Yes 2 4 1 1 2
EGADS : 5 0 Yes 2 5 1 2 4
EGADS : 6 0 Yes 4 6 1 2 4
EGADS : 7 0 Yes 5 6 1 2 5
EGADS : 8 0 Yes 3 1 1 3 8
EGADS : 9 0 Yes 4 2 1 3 4
EGADS : 10 0 Yes 6 5 1 4 5
EGADS : 11 0 Yes 1 7 1 6 8
EGADS : 12 0 Yes 3 8 1 6 8
EGADS : 13 0 Yes 7 8 1 6 7
EGADS : 14 0 Yes 7 9 1 7 9
EGADS : 15 0 Yes 8 10 1 7 9
EGADS : 16 0 Yes 9 10 1 7 10
EGADS : 17 0 Yes 8 7 1 8 9
EGADS : 18 0 Yes 10 9 1 9 10
EGADS : 19 1 Yes 12 11 NA 11 13
EGADS : 20 1 Yes 11 13 NA 11 16
EGADS : 21 1 Yes 14 13 NA 11 14
EGADS : 22 1 Yes 12 14 NA 11 15
EGADS : 23 1 Yes 16 15 NA 12 13
EGADS : 24 1 Yes 15 17 NA 12 16
EGADS : 25 1 Yes 18 17 NA 12 14
EGADS : 26 1 Yes 16 18 NA 12 15
EGADS : 27 1 Yes 12 16 NA 13 15
EGADS : 28 1 Yes 11 15 NA 13 16
EGADS : 29 1 Yes 14 18 NA 14 15
EGADS : 30 1 Yes 13 17 NA 14 16
EGADS : Node Information
EGADS : Node Active Coordinates
EGADS : 1 Yes 97.2007855 0 0
EGADS : 2 Yes 97.9335611 0 0
EGADS : 3 Yes 50 0 0
EGADS : 4 Yes 75.3047874 0 0
EGADS : 5 Yes 123.552357 0 4.7180639
EGADS : 6 Yes 118.391317 0 3.99272703
EGADS : 7 Yes 97.9335611 36.1389817 0
EGADS : 8 Yes 75.3047874 36.1389817 0
EGADS : 9 Yes 123.552357 97.6729236 4.7180639
EGADS : 10 Yes 118.391317 97.6729236 3.99272703
EGADS : 11 Yes 0 0 1951.57774
EGADS : 12 Yes 0 0 0
EGADS : 13 Yes 0 1953.45847 1951.57774
EGADS : 14 Yes 0 1953.45847 0
EGADS : 15 Yes 2040.21562 0 1951.57774
EGADS : 16 Yes 2040.21562 0 0
EGADS : 17 Yes 2040.21562 1953.45847 1951.57774
EGADS : 18 Yes 2040.21562 1953.45847 0
EGADS : Face and Edge Match Information
EGADS : No Face Matches Found
AFLR4 : Surface Mesh Spacing Setup
AFLR4 : Max Bounding Box Length = 3906.92
AFLR4 : Min Bounding Box Length = 3906.92
AFLR4 : Max Ref Bounding Box Length = 195.346
AFLR4 : Min Ref Bounding Box Length = 13.1976
AFLR4 : Reference Length = 21.7051
AFLR4 : BL Thickness = 0
AFLR4 : FarField Spacing = 2651.51
AFLR4 : Abs Min Surf Spacing = 0.0542627
AFLR4 : Min Surf Spacing = 0.108525
AFLR4 : Max Surf Spacing = 2.17051
AFLR4 : Global Scale Factor = 5
AFLR4 : Geometry Definition Information
AFLR4 : Definition Definition Composite Grid BC
AFLR4 : ID Type ID Type
AFLR4 : 0 glue-only composite - -
AFLR4 : 1 CAD geometry 0 STD w/BL
AFLR4 : 2 CAD geometry 0 STD w/BL
AFLR4 : 3 CAD geometry 0 STD w/BL
AFLR4 : 4 CAD geometry 0 STD w/BL
AFLR4 : 5 CAD geometry 0 STD w/BL
AFLR4 : 6 CAD geometry 0 STD w/BL
AFLR4 : 7 CAD geometry 0 STD w/BL
AFLR4 : 8 CAD geometry 0 STD w/BL
AFLR4 : 9 CAD geometry 0 STD w/BL
AFLR4 : 10 CAD geometry 0 STD w/BL
AFLR4 : 11 CAD geometry 0 FARFIELD
AFLR4 : 12 CAD geometry 0 FARFIELD
AFLR4 : 13 CAD geometry 0 FARFIELD
AFLR4 : 14 CAD geometry 0 FARFIELD
AFLR4 : 15 CAD geometry 0 FARFIELD
AFLR4 : 16 CAD geometry 0 FARFIELD
AFLR4 : Define CAD surface definition 1
AFLR4 : Define CAD surface definition 2
AFLR4 : Define CAD surface definition 3
AFLR4 : Define CAD surface definition 4
AFLR4 : Define CAD surface definition 5
AFLR4 : Define CAD surface definition 6
AFLR4 : Define CAD surface definition 7
AFLR4 : Define CAD surface definition 8
AFLR4 : Define CAD surface definition 9
AFLR4 : Define CAD surface definition 10
AFLR4 : Define CAD surface definition 11
AFLR4 : Define CAD surface definition 12
AFLR4 : Define CAD surface definition 13
AFLR4 : Define CAD surface definition 14
AFLR4 : Define CAD surface definition 15
AFLR4 : Define CAD surface definition 16
AFLR4 : Surface Grid Generation
AFLR4 : Generate optimal mesh on surface definition 1
AFLR2 : Nodes, Trias,Quads= 1107 2082 0
AFLR4 : Nodes, Trias,Quads= 685 1238 0
AFLR4 : Generate optimal mesh on surface definition 2
AFLR2 : Nodes, Trias,Quads= 1473 2759 0
AFLR4 : Nodes, Trias,Quads= 721 1255 0
AFLR4 : Generate optimal mesh on surface definition 3
AFLR2 : Nodes, Trias,Quads= 1116 2100 0
AFLR4 : Nodes, Trias,Quads= 671 1210 0
AFLR4 : Generate optimal mesh on surface definition 4
AFLR2 : Nodes, Trias,Quads= 1458 2729 0
AFLR4 : Nodes, Trias,Quads= 714 1241 0
AFLR4 : Generate optimal mesh on surface definition 5
AFLR2 : Nodes, Trias,Quads= 20 24 0
AFLR4 : Nodes, Trias,Quads= 14 12 0
AFLR4 : Generate optimal mesh on surface definition 6
AFLR2 : Nodes, Trias,Quads= 1108 2084 0
AFLR4 : Nodes, Trias,Quads= 683 1234 0
AFLR4 : Generate optimal mesh on surface definition 7
AFLR2 : Nodes, Trias,Quads= 1488 2789 0
AFLR4 : Nodes, Trias,Quads= 714 1241 0
AFLR4 : Generate optimal mesh on surface definition 8
AFLR2 : Nodes, Trias,Quads= 1112 2092 0
AFLR4 : Nodes, Trias,Quads= 653 1174 0
AFLR4 : Generate optimal mesh on surface definition 9
AFLR2 : Nodes, Trias,Quads= 1456 2725 0
AFLR4 : Nodes, Trias,Quads= 708 1229 0
AFLR4 : Generate optimal mesh on surface definition 10
AFLR2 : Nodes, Trias,Quads= 20 24 0
AFLR4 : Nodes, Trias,Quads= 14 12 0
AFLR4 : Generate optimal mesh on surface definition 11
AFLR2 : Nodes, Trias,Quads= 5 4 0
AFLR4 : Nodes, Trias,Quads= 4 2 0
AFLR4 : Generate optimal mesh on surface definition 12
AFLR2 : Nodes, Trias,Quads= 5 4 0
AFLR4 : Nodes, Trias,Quads= 4 2 0
AFLR4 : Generate optimal mesh on surface definition 13
AFLR2 : Nodes, Trias,Quads= 5 4 0
AFLR4 : Nodes, Trias,Quads= 4 2 0
AFLR4 : Generate optimal mesh on surface definition 14
AFLR2 : Nodes, Trias,Quads= 5 4 0
AFLR4 : Nodes, Trias,Quads= 4 2 0
AFLR4 : Generate optimal mesh on surface definition 15
AFLR2 : Nodes, Trias,Quads= 5 4 0
AFLR4 : Nodes, Trias,Quads= 4 2 0
AFLR4 : Generate optimal mesh on surface definition 16
AFLR2 : Nodes, Trias,Quads= 5 4 0
AFLR4 : Nodes, Trias,Quads= 4 2 0
DGEOM : Add surface definitions to composite definition 0
DGEOM : Glue composite surface definition 0
DGEOM : Nodes,Faces,BEdges= 4933 9858 1312
AFLR4 : Curvature BG Surface Grid Generation
AFLR4 : Nodes, Faces = 4933 9858
AFLR4 : Surface Grid Generation
AFLR4 : Generate optimal mesh on surface definition 1
AFLR2 : Nodes, Trias,Quads= 12796 24695 0
AFLR4 : Nodes, Trias,Quads= 7764 14631 0
AFLR4 : Generate optimal mesh on surface definition 2
AFLR2 : Nodes, Trias,Quads= 29245 57075 0
AFLR4 : Nodes, Trias,Quads= 12448 23481 0
AFLR4 : Generate optimal mesh on surface definition 3
AFLR2 : Nodes, Trias,Quads= 12136 23411 0
AFLR4 : Nodes, Trias,Quads= 7447 14033 0
AFLR4 : Generate optimal mesh on surface definition 4
AFLR2 : Nodes, Trias,Quads= 29424 57435 0
AFLR4 : Nodes, Trias,Quads= 12399 23385 0
AFLR4 : Generate optimal mesh on surface definition 5
AFLR2 : Nodes, Trias,Quads= 196 293 0
AFLR4 : Nodes, Trias,Quads= 188 277 0
AFLR4 : Generate optimal mesh on surface definition 6
AFLR2 : Nodes, Trias,Quads= 12819 24741 0
AFLR4 : Nodes, Trias,Quads= 7725 14553 0
AFLR4 : Generate optimal mesh on surface definition 7
AFLR2 : Nodes, Trias,Quads= 29449 57483 0
AFLR4 : Nodes, Trias,Quads= 12413 23411 0
AFLR4 : Generate optimal mesh on surface definition 8
AFLR2 : Nodes, Trias,Quads= 12144 23427 0
AFLR4 : Nodes, Trias,Quads= 7471 14081 0
AFLR4 : Generate optimal mesh on surface definition 9
AFLR2 : Nodes, Trias,Quads= 29445 57477 0
AFLR4 : Nodes, Trias,Quads= 12478 23543 0
AFLR4 : Generate optimal mesh on surface definition 10
AFLR2 : Nodes, Trias,Quads= 196 293 0
AFLR4 : Nodes, Trias,Quads= 188 277 0
AFLR4 : Generate optimal mesh on surface definition 11
AFLR2 : Nodes, Trias,Quads= 12 14 0
AFLR4 : Nodes, Trias,Quads= 8 6 0
AFLR4 : Generate optimal mesh on surface definition 12
AFLR2 : Nodes, Trias,Quads= 12 14 0
AFLR4 : Nodes, Trias,Quads= 8 6 0
AFLR4 : Generate optimal mesh on surface definition 13
AFLR2 : Nodes, Trias,Quads= 12 14 0
AFLR4 : Nodes, Trias,Quads= 8 6 0
AFLR4 : Generate optimal mesh on surface definition 14
AFLR2 : Nodes, Trias,Quads= 12 14 0
AFLR4 : Nodes, Trias,Quads= 8 6 0
AFLR4 : Generate optimal mesh on surface definition 15
AFLR2 : Nodes, Trias,Quads= 12 14 0
AFLR4 : Nodes, Trias,Quads= 8 6 0
AFLR4 : Generate optimal mesh on surface definition 16
AFLR2 : Nodes, Trias,Quads= 12 14 0
AFLR4 : Nodes, Trias,Quads= 8 6 0
DGEOM : Add surface definitions to composite definition 0
DGEOM : Glue composite surface definition 0
DGEOM : Nodes,Faces,BEdges= 75858 151708 9398
OVERALL : CPU Time = 2.100 seconds
Body 1 (of 2)
Number of nodes = 75838
Number of elements = 151672
Number of triangle elements = 151672
Number of quadrilateral elements = 0
Body 2 (of 2)
Number of nodes = 20
Number of elements = 36
Number of triangle elements = 36
Number of quadrilateral elements = 0
----------------------------
Total number of nodes = 75858
Total number of elements = 151708
Total number of triangle elements = 151708
Total number of quadrilateral elements = 0
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 3
Name = leftWing, index = 1
Name = riteWing, index = 2
Name = Farfield, index = 3
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Wing, index = 1
Name = Farfield, index = 2
Getting volume mesh
UG PARAM : SETTING INPUT PARAMETERS FROM ARGUMENT VECTOR
UG PARAM : mrecm = 3
UG PARAM : mrecqm = 3
UG PARAM : mpfrmt = 0
AFLR2 : ---------------------------------------
AFLR2 : AFLR2 LIBRARY
AFLR2 : ADVANCING-FRONT/LOCAL-RECONNECTION
AFLR2 : TRIA/QUAD GRID GENERATOR
AFLR2 : Version Number 9.18.1
AFLR2 : Version Date 06/11/24 @ 05:52PM
AFLR2 : Compile OS Linux 3.10.0-1160.88.1.el7.x86_64 x86_64
AFLR2 : Compile Date 06/11/24 @ 06:33PM
AFLR2 : Copyright 1994-2021, D.L. Marcum
AFLR2 : ---------------------------------------
AFLR4 : ---------------------------------------
AFLR4 : AFLR4 LIBRARY
AFLR4 : ADVANCING-FRONT/LOCAL-RECONNECTION
AFLR4 : TRIA/QUAD SURFACE GRID GENERATOR
AFLR4 : Version Number 11.5.15
AFLR4 : Version Date 07/19/24 @ 07:04PM
AFLR4 : Compile OS Linux 3.10.0-1160.88.1.el7.x86_64 x86_64
AFLR4 : Compile Date 07/19/24 @ 07:42PM
AFLR4 : Copyright 1994-2021, D.L. Marcum
AFLR4 : ---------------------------------------
EGADS : ---------------------------------------
EGADS : Engineering Geometry Aircraft Design System
EGADS : Version 1.26
EGADS : OpenCASCADE Version 7.8.1
EGADS : ---------------------------------------
EGADS : EGADS CAD Geometry Setup
EGADS : Model has 2 Active Bodies
EGADS : Body 0 is a SolidBody
EGADS : Body 0 has 1 Shells
EGADS : Body 0 has 10 Faces
EGADS : Body 0 has 18 Edges
EGADS : Body 0 has 10 Loops
EGADS : Body 0 has 10 Nodes
EGADS : Body 1 is a SolidBody
EGADS : Body 1 has 1 Shells
EGADS : Body 1 has 6 Faces
EGADS : Body 1 has 12 Edges
EGADS : Body 1 has 6 Loops
EGADS : Body 1 has 8 Nodes
EGADS : Check Grid BCs
EGADS : Grid BCs are OK
EGADS : Face Neighbor-Faces Information
EGADS : QC = Face Quad Combination Flag
EGADS : IER = Face Isolated Edge Refinement Flag
EGADS : ER = Face Edge Refinement Factor
EGADS : Not applicable for Faces with a FarField Grid BC.
EGADS : SF = Face Scale Factor
EGADS : Not applicable for Faces with a FarField Grid BC.
EGADS : Face Body QC IER ER Scale Neighbor
EGADS : ID Active ID Flag Flag Weight Factor Faces
EGADS : 1 Yes 0 0 1 1 1 2 3 6
EGADS : 2 Yes 0 0 1 1 1 1 4 5
EGADS : 3 Yes 0 0 1 1 1 1 4 8
EGADS : 4 Yes 0 0 1 1 1 2 3 5
EGADS : 5 Yes 0 0 1 1 1 2 4
EGADS : 6 Yes 0 0 1 1 1 1 7 8
EGADS : 7 Yes 0 0 1 1 1 6 9 10
EGADS : 8 Yes 0 0 1 1 1 3 6 9
EGADS : 9 Yes 0 0 1 1 1 7 8 10
EGADS : 10 Yes 0 0 1 1 1 7 9
EGADS : 11 Yes 1 0 1 NA NA 13 14 15 16
EGADS : 12 Yes 1 0 1 NA NA 13 14 15 16
EGADS : 13 Yes 1 0 1 NA NA 11 12 15 16
EGADS : 14 Yes 1 0 1 NA NA 11 12 15 16
EGADS : 15 Yes 1 0 1 NA NA 11 12 13 14
EGADS : 16 Yes 1 0 1 NA NA 11 12 13 14
EGADS : Face Edges Information
EGADS : Face Edges
EGADS : 1 -1 2 3 -4
EGADS : 2 -5 4 6 -7
EGADS : 3 -3 8 1 -9
EGADS : 4 -6 9 5 -10
EGADS : 5 7 10
EGADS : 6 11 13 -12 -2
EGADS : 7 14 16 -15 -13
EGADS : 8 12 17 -11 -8
EGADS : 9 15 18 -14 -17
EGADS : 10 -16 -18
EGADS : 11 19 20 -21 -22
EGADS : 12 -23 26 25 -24
EGADS : 13 27 23 -28 -19
EGADS : 14 -29 21 30 -25
EGADS : 15 22 29 -26 -27
EGADS : 16 -20 28 24 -30
EGADS : Face Loops Information
EGADS : Face Loops
EGADS : 1 1
EGADS : 2 2
EGADS : 3 3
EGADS : 4 4
EGADS : 5 5
EGADS : 6 6
EGADS : 7 7
EGADS : 8 8
EGADS : 9 9
EGADS : 10 10
EGADS : 11 11
EGADS : 12 12
EGADS : 13 13
EGADS : 14 14
EGADS : 15 15
EGADS : 16 16
EGADS : Loop Edges Information
EGADS : Loop Active Edges
EGADS : 1 Yes -1 2 3 -4
EGADS : 2 Yes -5 4 6 -7
EGADS : 3 Yes -3 8 1 -9
EGADS : 4 Yes -6 9 5 -10
EGADS : 5 Yes 7 10
EGADS : 6 Yes 11 13 -12 -2
EGADS : 7 Yes 14 16 -15 -13
EGADS : 8 Yes 12 17 -11 -8
EGADS : 9 Yes 15 18 -14 -17
EGADS : 10 Yes -16 -18
EGADS : 11 Yes 19 20 -21 -22
EGADS : 12 Yes -23 26 25 -24
EGADS : 13 Yes 27 23 -28 -19
EGADS : 14 Yes -29 21 30 -25
EGADS : 15 Yes 22 29 -26 -27
EGADS : 16 Yes -20 28 24 -30
EGADS : Edge Node, Scale Factor, and Neighbor-Faces Information
EGADS : ESF = Edge Scale Factor
EGADS : Not applicable for DEGENERATE Edges or Edges with a FarField
EGADS : Grid BC Neighbor Face.
EGADS : Neighbor
EGADS : Edge Body Active Node1 Node2 ESF Faces
EGADS : 1 0 Yes 1 2 1 1 3
EGADS : 2 0 Yes 1 3 1 1 6
EGADS : 3 0 Yes 3 4 1 1 3
EGADS : 4 0 Yes 2 4 1 1 2
EGADS : 5 0 Yes 2 5 1 2 4
EGADS : 6 0 Yes 4 6 1 2 4
EGADS : 7 0 Yes 5 6 1 2 5
EGADS : 8 0 Yes 3 1 1 3 8
EGADS : 9 0 Yes 4 2 1 3 4
EGADS : 10 0 Yes 6 5 1 4 5
EGADS : 11 0 Yes 1 7 1 6 8
EGADS : 12 0 Yes 3 8 1 6 8
EGADS : 13 0 Yes 7 8 1 6 7
EGADS : 14 0 Yes 7 9 1 7 9
EGADS : 15 0 Yes 8 10 1 7 9
EGADS : 16 0 Yes 9 10 1 7 10
EGADS : 17 0 Yes 8 7 1 8 9
EGADS : 18 0 Yes 10 9 1 9 10
EGADS : 19 1 Yes 12 11 NA 11 13
EGADS : 20 1 Yes 11 13 NA 11 16
EGADS : 21 1 Yes 14 13 NA 11 14
EGADS : 22 1 Yes 12 14 NA 11 15
EGADS : 23 1 Yes 16 15 NA 12 13
EGADS : 24 1 Yes 15 17 NA 12 16
EGADS : 25 1 Yes 18 17 NA 12 14
EGADS : 26 1 Yes 16 18 NA 12 15
EGADS : 27 1 Yes 12 16 NA 13 15
EGADS : 28 1 Yes 11 15 NA 13 16
EGADS : 29 1 Yes 14 18 NA 14 15
EGADS : 30 1 Yes 13 17 NA 14 16
EGADS : Node Information
EGADS : Node Active Coordinates
EGADS : 1 Yes 97.2007855 0 0
EGADS : 2 Yes 97.9335611 0 0
EGADS : 3 Yes 50 0 0
EGADS : 4 Yes 75.3047874 0 0
EGADS : 5 Yes 123.552357 0 4.7180639
EGADS : 6 Yes 118.391317 0 3.99272703
EGADS : 7 Yes 97.9335611 36.1389817 0
EGADS : 8 Yes 75.3047874 36.1389817 0
EGADS : 9 Yes 123.552357 97.6729236 4.7180639
EGADS : 10 Yes 118.391317 97.6729236 3.99272703
EGADS : 11 Yes 0 0 1951.57774
EGADS : 12 Yes 0 0 0
EGADS : 13 Yes 0 1953.45847 1951.57774
EGADS : 14 Yes 0 1953.45847 0
EGADS : 15 Yes 2040.21562 0 1951.57774
EGADS : 16 Yes 2040.21562 0 0
EGADS : 17 Yes 2040.21562 1953.45847 1951.57774
EGADS : 18 Yes 2040.21562 1953.45847 0
EGADS : Face and Edge Match Information
EGADS : No Face Matches Found
AFLR4 : Surface Mesh Spacing Setup
AFLR4 : Max Bounding Box Length = 3906.92
AFLR4 : Min Bounding Box Length = 3906.92
AFLR4 : Max Ref Bounding Box Length = 195.346
AFLR4 : Min Ref Bounding Box Length = 13.1976
AFLR4 : Reference Length = 13.1976
AFLR4 : BL Thickness = 0
AFLR4 : FarField Spacing = 428.309
AFLR4 : Abs Min Surf Spacing = 0.032994
AFLR4 : Min Surf Spacing = 0.065988
AFLR4 : Max Surf Spacing = 1.31976
AFLR4 : Global Scale Factor = 1
AFLR4 : Geometry Definition Information
AFLR4 : Definition Definition Composite Grid BC
AFLR4 : ID Type ID Type
AFLR4 : 0 glue-only composite - -
AFLR4 : 1 CAD geometry 0 STD
AFLR4 : 2 CAD geometry 0 STD
AFLR4 : 3 CAD geometry 0 STD
AFLR4 : 4 CAD geometry 0 STD
AFLR4 : 5 CAD geometry 0 STD
AFLR4 : 6 CAD geometry 0 STD
AFLR4 : 7 CAD geometry 0 STD
AFLR4 : 8 CAD geometry 0 STD
AFLR4 : 9 CAD geometry 0 STD
AFLR4 : 10 CAD geometry 0 STD
AFLR4 : 11 CAD geometry 0 FARFIELD
AFLR4 : 12 CAD geometry 0 FARFIELD
AFLR4 : 13 CAD geometry 0 FARFIELD
AFLR4 : 14 CAD geometry 0 FARFIELD
AFLR4 : 15 CAD geometry 0 FARFIELD
AFLR4 : 16 CAD geometry 0 FARFIELD
AFLR4 : Define CAD surface definition 1
AFLR4 : Define CAD surface definition 2
AFLR4 : Define CAD surface definition 3
AFLR4 : Define CAD surface definition 4
AFLR4 : Define CAD surface definition 5
AFLR4 : Define CAD surface definition 6
AFLR4 : Define CAD surface definition 7
AFLR4 : Define CAD surface definition 8
AFLR4 : Define CAD surface definition 9
AFLR4 : Define CAD surface definition 10
AFLR4 : Define CAD surface definition 11
AFLR4 : Define CAD surface definition 12
AFLR4 : Define CAD surface definition 13
AFLR4 : Define CAD surface definition 14
AFLR4 : Define CAD surface definition 15
AFLR4 : Define CAD surface definition 16
AFLR43 : INPUT SURFACE MESH FROM TESS
AFLR43 : Quad Surface Faces= 0
AFLR43 : Tria Surface Faces= 151708
AFLR43 : Nodes = 75858
UG PARAM : SETTING INPUT PARAMETERS FROM ARGUMENT VECTOR
UG PARAM : mrecm = 3
UG PARAM : mrecqm = 3
UG PARAM : mpfrmt = 0
AFLR3 : ---------------------------------------
AFLR3 : AFLR3 LIBRARY
AFLR3 : ADVANCING-FRONT/LOCAL-RECONNECTION
AFLR3 : TETRAHEDRAL GRID GENERATOR
AFLR3 : Version Number 16.32.50
AFLR3 : Version Date 10/31/23 @ 06:31PM
AFLR3 : Compile OS Linux 3.10.0-1160.88.1.el7.x86_64 x86_64
AFLR3 : Compile Date 03/08/24 @ 01:03AM
AFLR3 : Copyright 1994-2021, D.L. Marcum
AFLR3 : ---------------------------------------
AFLR3 IC : INPUT SURFACE GRID CHECK
AFLR3 IC : Nodes, Elements = 75858 0
UG3 : Boundary Conditions
UG3 : B-Face ID Boundary Condition
UG3 : 1 Solid
UG3 : 2 Solid
UG3 : 3 Solid
UG3 : 4 Solid
UG3 : 5 Solid
UG3 : 6 Solid
UG3 : 7 Solid
UG3 : 8 Solid
UG3 : 9 Solid
UG3 : 10 Solid
UG3 : 11 FarField
UG3 : 12 FarField
UG3 : 13 FarField
UG3 : 14 FarField
UG3 : 15 FarField
UG3 : 16 FarField
AFLR3 : CPU Time = 0.243 seconds
AFLR3 IG : INITIAL VOLUME GRID GENERATION
AFLR3 IG : Nodes, Elements = 75858 0
AFLR3 IG : Nodes, Elements = 8 10
AFLR3 IG : Nodes, Elements = 15174 110930
AFLR3 IG : Nodes, Elements = 30348 239498
AFLR3 IG : Nodes, Elements = 45522 364389
AFLR3 IG : Nodes, Elements = 60696 488757
AFLR3 IG : Nodes, Elements = 75865 649523
AFLR3 IG : Nodes, Elements = 75865 648313
AFLR3 IG : Nodes, Elements = 75865 648327
AFLR3 IG : Nodes, Elements = 75865 648302
AFLR3 IG : Nodes, Elements = 75858 417143
AFLR3 IG : Nodes, Elements = 75858 417623
AFLR3 IG : Nodes, Elements = 75858 262238
AFLR3 IG : Nodes, Elements = 75858 239193
AFLR3 : CPU Time = 6.325 seconds
AFLR3 GG : ISOTROPIC VOLUME GRID GENERATION
AFLR3 GG : Nodes, Elements = 75858 239193
AFLR3 GG : Nodes, Elements = 97168 303709
AFLR3 GG : Nodes, Elements = 97168 385878
AFLR3 GG : Nodes, Elements = 97168 352378
AFLR3 GG : Nodes, Elements = 114958 409432
AFLR3 GG : Nodes, Elements = 114958 486501
AFLR3 GG : Nodes, Elements = 114958 455941
AFLR3 GG : Nodes, Elements = 139008 530402
AFLR3 GG : Nodes, Elements = 139008 630930
AFLR3 GG : Nodes, Elements = 139008 591909
AFLR3 GG : Nodes, Elements = 164606 669875
AFLR3 GG : Nodes, Elements = 164606 782306
AFLR3 GG : Nodes, Elements = 164606 743489
AFLR3 GG : Nodes, Elements = 192184 827570
AFLR3 GG : Nodes, Elements = 192184 943865
AFLR3 GG : Nodes, Elements = 192184 907783
AFLR3 GG : Nodes, Elements = 220515 994115
AFLR3 GG : Nodes, Elements = 220515 1110440
AFLR3 GG : Nodes, Elements = 220515 1076111
AFLR3 GG : Nodes, Elements = 249997 1165619
AFLR3 GG : Nodes, Elements = 249997 1284333
AFLR3 GG : Nodes, Elements = 249997 1251164
AFLR3 GG : Nodes, Elements = 279372 1340138
AFLR3 GG : Nodes, Elements = 279372 1457486
AFLR3 GG : Nodes, Elements = 279372 1425098
AFLR3 GG : Nodes, Elements = 308490 1513100
AFLR3 GG : Nodes, Elements = 308490 1628640
AFLR3 GG : Nodes, Elements = 308490 1598005
AFLR3 GG : Nodes, Elements = 336583 1682907
AFLR3 GG : Nodes, Elements = 336583 1794254
AFLR3 GG : Nodes, Elements = 336583 1764714
AFLR3 GG : Nodes, Elements = 363849 1846933
AFLR3 GG : Nodes, Elements = 363849 1955651
AFLR3 GG : Nodes, Elements = 363849 1927081
AFLR3 GG : Nodes, Elements = 390451 2007227
AFLR3 GG : Nodes, Elements = 390451 2112073
AFLR3 GG : Nodes, Elements = 390451 2084807
AFLR3 GG : Nodes, Elements = 415986 2161729
AFLR3 GG : Nodes, Elements = 415986 2262418
AFLR3 GG : Nodes, Elements = 415986 2236438
AFLR3 GG : Nodes, Elements = 440254 2309507
AFLR3 GG : Nodes, Elements = 440254 2406149
AFLR3 GG : Nodes, Elements = 440254 2380588
AFLR3 GG : Nodes, Elements = 463902 2451765
AFLR3 GG : Nodes, Elements = 463902 2545642
AFLR3 GG : Nodes, Elements = 463902 2521191
AFLR3 GG : Nodes, Elements = 486301 2588578
AFLR3 GG : Nodes, Elements = 486301 2676626
AFLR3 GG : Nodes, Elements = 486301 2654211
AFLR3 GG : Nodes, Elements = 507793 2718862
AFLR3 GG : Nodes, Elements = 507793 2804035
AFLR3 GG : Nodes, Elements = 507793 2782083
AFLR3 GG : Nodes, Elements = 528099 2843149
AFLR3 GG : Nodes, Elements = 528099 2922717
AFLR3 GG : Nodes, Elements = 528099 2902566
AFLR3 GG : Nodes, Elements = 547566 2961086
AFLR3 GG : Nodes, Elements = 547566 3037884
AFLR3 GG : Nodes, Elements = 547566 3018397
AFLR3 GG : Nodes, Elements = 565987 3073758
AFLR3 GG : Nodes, Elements = 565987 3146461
AFLR3 GG : Nodes, Elements = 565987 3127793
AFLR3 GG : Nodes, Elements = 583472 3180335
AFLR3 GG : Nodes, Elements = 583472 3249336
AFLR3 GG : Nodes, Elements = 583472 3231736
AFLR3 GG : Nodes, Elements = 600126 3281787
AFLR3 GG : Nodes, Elements = 600126 3347024
AFLR3 GG : Nodes, Elements = 600126 3330496
AFLR3 GG : Nodes, Elements = 615842 3377705
AFLR3 GG : Nodes, Elements = 615842 3438871
AFLR3 GG : Nodes, Elements = 615842 3423841
AFLR3 GG : Nodes, Elements = 630903 3469100
AFLR3 GG : Nodes, Elements = 630903 3527688
AFLR3 GG : Nodes, Elements = 630903 3513086
AFLR3 GG : Nodes, Elements = 645238 3556133
AFLR3 GG : Nodes, Elements = 645238 3611630
AFLR3 GG : Nodes, Elements = 645238 3597904
AFLR3 GG : Nodes, Elements = 658960 3639116
AFLR3 GG : Nodes, Elements = 658960 3692436
AFLR3 GG : Nodes, Elements = 658960 3679362
AFLR3 GG : Nodes, Elements = 671927 3718298
AFLR3 GG : Nodes, Elements = 671927 3768390
AFLR3 GG : Nodes, Elements = 671927 3756083
AFLR3 GG : Nodes, Elements = 684287 3793185
AFLR3 GG : Nodes, Elements = 684287 3841563
AFLR3 GG : Nodes, Elements = 684287 3829269
AFLR3 GG : Nodes, Elements = 696104 3864741
AFLR3 GG : Nodes, Elements = 696104 3910841
AFLR3 GG : Nodes, Elements = 696104 3899361
AFLR3 GG : Nodes, Elements = 707264 3932857
AFLR3 GG : Nodes, Elements = 707264 3975861
AFLR3 GG : Nodes, Elements = 707264 3965477
AFLR3 GG : Nodes, Elements = 718027 3997787
AFLR3 GG : Nodes, Elements = 718027 4039732
AFLR3 GG : Nodes, Elements = 718027 4029129
AFLR3 GG : Nodes, Elements = 728343 4060098
AFLR3 GG : Nodes, Elements = 728343 4099759
AFLR3 GG : Nodes, Elements = 728343 4090147
AFLR3 GG : Nodes, Elements = 738210 4119758
AFLR3 GG : Nodes, Elements = 738210 4158329
AFLR3 GG : Nodes, Elements = 738210 4148565
AFLR3 GG : Nodes, Elements = 747725 4177129
AFLR3 GG : Nodes, Elements = 747725 4213466
AFLR3 GG : Nodes, Elements = 747725 4204755
AFLR3 GG : Nodes, Elements = 756786 4231950
AFLR3 GG : Nodes, Elements = 756786 4266663
AFLR3 GG : Nodes, Elements = 756786 4258286
AFLR3 GG : Nodes, Elements = 765619 4284797
AFLR3 GG : Nodes, Elements = 765619 4318923
AFLR3 GG : Nodes, Elements = 765619 4310519
AFLR3 GG : Nodes, Elements = 774102 4335981
AFLR3 GG : Nodes, Elements = 774102 4368533
AFLR3 GG : Nodes, Elements = 774102 4360629
AFLR3 GG : Nodes, Elements = 782191 4384905
AFLR3 GG : Nodes, Elements = 782191 4415929
AFLR3 GG : Nodes, Elements = 782191 4408308
AFLR3 GG : Nodes, Elements = 790055 4431913
AFLR3 GG : Nodes, Elements = 790055 4462202
AFLR3 GG : Nodes, Elements = 790055 4454838
AFLR3 GG : Nodes, Elements = 797555 4477352
AFLR3 GG : Nodes, Elements = 797555 4505899
AFLR3 GG : Nodes, Elements = 797555 4498995
AFLR3 GG : Nodes, Elements = 804778 4520677
AFLR3 GG : Nodes, Elements = 804778 4548213
AFLR3 GG : Nodes, Elements = 804778 4541605
AFLR3 GG : Nodes, Elements = 811858 4562856
AFLR3 GG : Nodes, Elements = 811858 4590333
AFLR3 GG : Nodes, Elements = 811858 4583593
AFLR3 GG : Nodes, Elements = 818681 4604067
AFLR3 GG : Nodes, Elements = 818681 4630383
AFLR3 GG : Nodes, Elements = 818681 4623848
AFLR3 GG : Nodes, Elements = 825289 4643683
AFLR3 GG : Nodes, Elements = 825289 4669348
AFLR3 GG : Nodes, Elements = 825289 4662894
AFLR3 GG : Nodes, Elements = 831545 4681674
AFLR3 GG : Nodes, Elements = 831545 4705793
AFLR3 GG : Nodes, Elements = 831545 4699871
AFLR3 GG : Nodes, Elements = 837605 4718058
AFLR3 GG : Nodes, Elements = 837605 4741566
AFLR3 GG : Nodes, Elements = 837605 4735607
AFLR3 GG : Nodes, Elements = 843412 4753033
AFLR3 GG : Nodes, Elements = 843412 4775156
AFLR3 GG : Nodes, Elements = 843412 4769761
AFLR3 GG : Nodes, Elements = 848780 4785871
AFLR3 GG : Nodes, Elements = 848780 4806421
AFLR3 GG : Nodes, Elements = 848780 4801461
AFLR3 GG : Nodes, Elements = 853786 4816482
AFLR3 GG : Nodes, Elements = 853786 4835744
AFLR3 GG : Nodes, Elements = 853786 4831051
AFLR3 GG : Nodes, Elements = 858360 4844779
AFLR3 GG : Nodes, Elements = 858360 4862787
AFLR3 GG : Nodes, Elements = 858360 4858186
AFLR3 GG : Nodes, Elements = 862426 4870389
AFLR3 GG : Nodes, Elements = 862426 4886510
AFLR3 GG : Nodes, Elements = 862426 4882240
AFLR3 GG : Nodes, Elements = 865970 4892872
AFLR3 GG : Nodes, Elements = 865970 4906556
AFLR3 GG : Nodes, Elements = 865970 4903186
AFLR3 GG : Nodes, Elements = 869079 4912519
AFLR3 GG : Nodes, Elements = 869079 4924546
AFLR3 GG : Nodes, Elements = 869079 4921496
AFLR3 GG : Nodes, Elements = 871727 4929441
AFLR3 GG : Nodes, Elements = 871727 4939749
AFLR3 GG : Nodes, Elements = 871727 4937169
AFLR3 GG : Nodes, Elements = 873897 4943682
AFLR3 GG : Nodes, Elements = 873897 4952190
AFLR3 GG : Nodes, Elements = 873897 4949987
AFLR3 GG : Nodes, Elements = 875556 4954966
AFLR3 GG : Nodes, Elements = 875556 4961597
AFLR3 GG : Nodes, Elements = 875556 4959782
AFLR3 GG : Nodes, Elements = 876770 4963425
AFLR3 GG : Nodes, Elements = 876770 4968199
AFLR3 GG : Nodes, Elements = 876770 4966923
AFLR3 GG : Nodes, Elements = 877602 4969423
AFLR3 GG : Nodes, Elements = 877602 4972665
AFLR3 GG : Nodes, Elements = 877602 4971787
AFLR3 GG : Nodes, Elements = 878108 4973305
AFLR3 GG : Nodes, Elements = 878108 4975268
AFLR3 GG : Nodes, Elements = 878108 4974714
AFLR3 GG : Nodes, Elements = 878387 4975552
AFLR3 GG : Nodes, Elements = 878387 4976665
AFLR3 GG : Nodes, Elements = 878387 4976319
AFLR3 GG : Nodes, Elements = 878544 4976790
AFLR3 GG : Nodes, Elements = 878544 4977455
AFLR3 GG : Nodes, Elements = 878544 4977234
AFLR3 GG : Nodes, Elements = 878631 4977495
AFLR3 GG : Nodes, Elements = 878631 4977848
AFLR3 GG : Nodes, Elements = 878631 4977721
AFLR3 GG : Nodes, Elements = 878687 4977889
AFLR3 GG : Nodes, Elements = 878687 4978126
AFLR3 GG : Nodes, Elements = 878687 4978037
AFLR3 GG : Nodes, Elements = 878722 4978142
AFLR3 GG : Nodes, Elements = 878722 4978289
AFLR3 GG : Nodes, Elements = 878722 4978238
AFLR3 GG : Nodes, Elements = 878746 4978310
AFLR3 GG : Nodes, Elements = 878746 4978403
AFLR3 GG : Nodes, Elements = 878746 4978373
AFLR3 GG : Nodes, Elements = 878766 4978433
AFLR3 GG : Nodes, Elements = 878766 4978522
AFLR3 GG : Nodes, Elements = 878766 4978484
AFLR3 GG : Nodes, Elements = 878785 4978541
AFLR3 GG : Nodes, Elements = 878785 4978614
AFLR3 GG : Nodes, Elements = 878785 4978595
AFLR3 GG : Nodes, Elements = 878793 4978619
AFLR3 GG : Nodes, Elements = 878793 4978654
AFLR3 GG : Nodes, Elements = 878793 4978636
AFLR3 GG : Nodes, Elements = 878795 4978642
AFLR3 GG : Nodes, Elements = 878795 4978649
AFLR3 GG : Nodes, Elements = 878795 4978646
AFLR3 GG : Nodes, Elements = 878930 4979051
AFLR3 GG : Nodes, Elements = 878930 4979690
AFLR3 GG : Nodes, Elements = 878930 4979398
AFLR3 GG : Nodes, Elements = 878983 4979557
AFLR3 GG : Nodes, Elements = 878983 4979723
AFLR3 GG : Nodes, Elements = 878983 4979674
AFLR3 GG : Nodes, Elements = 879002 4979731
AFLR3 GG : Nodes, Elements = 879002 4979795
AFLR3 GG : Nodes, Elements = 879002 4979778
AFLR3 GG : Nodes, Elements = 879007 4979793
AFLR3 GG : Nodes, Elements = 879007 4979811
AFLR3 GG : Nodes, Elements = 879007 4979804
AFLR3 : CPU Time = 2.522 minutes
AFLR3 QI : QUALITY IMPROVEMENT
AFLR3 QI : Nodes, Elements = 879007 4979804
AFLR3 QI : Nodes, Elements = 872139 4941328
AFLR3 QI : Nodes, Elements = 870068 4929616
AFLR3 QI : Nodes, Elements = 869401 4925872
AFLR3 QI : Nodes, Elements = 869242 4924981
AFLR3 QI : Nodes, Elements = 869215 4924823
AFLR3 QI : Nodes, Elements = 869212 4924805
AFLR3 QI : Nodes, Elements = 869212 4945229
AFLR3 QI : Nodes, Elements = 869212 4922255
AFLR3 QI : Nodes, Elements = 869212 4912769
AFLR3 QI : Nodes, Elements = 869212 4927916
AFLR3 QI : Nodes, Elements = 869212 4912557
AFLR3 QI : Nodes, Elements = 869212 4912067
AFLR3 QI : Nodes, Elements = 869212 4926194
AFLR3 QI : Nodes, Elements = 869212 4912315
AFLR3 QI : Nodes, Elements = 869212 4911995
AFLR3 QI : Nodes, Elements = 869212 4916957
AFLR3 QI : Nodes, Elements = 869212 4911244
AFLR3 QI : Nodes, Elements = 869212 4910830
AFLR3 QI : Nodes, Elements = 869212 4913686
AFLR3 QI : Nodes, Elements = 869212 4910459
AFLR3 QI : Nodes, Elements = 869212 4910187
AFLR3 : CPU Time = 31.551 seconds
AFLR3 QRG: QUALITY GRID RE-GENERATION
AFLR3 QRG: Nodes, Elements = 869212 4910187
AFLR3 QRG: Nodes, Elements = 869211 4910183
AFLR3 QRG: Nodes, Elements = 869210 4910179
AFLR3 QRG: Nodes, Elements = 869209 4910176
AFLR3 QRG: Nodes, Elements = 869208 4910172
AFLR3 QRG: Nodes, Elements = 869207 4910168
AFLR3 : CPU Time = 1.044 seconds
AFLR3 : DONE
UG3 : DIHEDRAL ANGLE CHECK
UG3 : No. Tet Elems = 4910168
UG3 : Min, Max Ang = 5.869 164.4
UG3 : Average Angle = 70.2
UG3 : No. Angle>160.0 = 17
UG3 : No. Angle>179.9 = 0
UG3 : VOL CHECK
UG3 : Total-Volume = 5.96e+10
UG3 : No. Tet Elems = 4910168
UG3 : Min Vol = 1.78e-05
UG3 : Average Vol = 1.21e+04
UG3 : Total-Tet-Vol = 5.96e+10
UG3 : No. Vol<TOL = 0
UG3 : Q VOL-LENGTH-RATIO CHECK
2/3 2
UG3 : Q = c * Vol / sum( L )
UG3 : 0 <= Q <= 1
UG3 : No. Tet Elems = 4910168
UG3 : Min, Max Q = 0.0363 1
UG3 : Average Q = 0.891
UG3 : No. Q< 0.1 = 32
UG3 : No. Q< 0.01 = 0
OVERALL : CPU Time = 3.237 minutes
UG3 : DIHEDRAL ANGLE CHECK
UG3 : No. Tet Elems = 4910168
UG3 : Min, Max Ang = 5.869 164.4
UG3 : Average Angle = 70.2
UG3 : No. Angle>160.0 = 17
UG3 : No. Angle>179.9 = 0
UG3 : VOL CHECK
UG3 : Total-Volume = 5.96e+10
UG3 : No. Tet Elems = 4910168
UG3 : Min Vol = 1.78e-05
UG3 : Average Vol = 1.21e+04
UG3 : Total-Tet-Vol = 5.96e+10
UG3 : No. Vol<TOL = 0
UG3 : Q VOL-LENGTH-RATIO CHECK
2/3 2
UG3 : Q = c * Vol / sum( L )
UG3 : 0 <= Q <= 1
UG3 : Note that L includes scaling for BL-aspect=ratio
UG3 : No. Tet Elems = 4910168
UG3 : Min, Max Q = 0.202 1
UG3 : Average Q = 0.854
UG3 : No. Q< 0.1 = 0
UG3 : No. Q< 0.01 = 0
UG3 : CPU Time = 0.000 seconds
EGADS : ---------------------------------------
EGADS : Engineering Geometry Aircraft Design System
EGADS : Version 1.26
EGADS : OpenCASCADE Version 7.8.1
EGADS : ---------------------------------------
EGADS : CREATE EGADS TESS FROM AFLR3 DATA
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 1
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 2
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 3
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 4
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 5
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 6
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 7
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 8
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 9
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 10
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 11
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 12
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 13
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 14
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 15
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 16
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 17
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 18
EGADS : CREATING TESSELLATION FOR BODY 0 FACE 1
EGADS : CREATING TESSELLATION FOR BODY 0 FACE 2
EGADS : CREATING TESSELLATION FOR BODY 0 FACE 3
EGADS : CREATING TESSELLATION FOR BODY 0 FACE 4
EGADS : CREATING TESSELLATION FOR BODY 0 FACE 5
EGADS : CREATING TESSELLATION FOR BODY 0 FACE 6
EGADS : CREATING TESSELLATION FOR BODY 0 FACE 7
EGADS : CREATING TESSELLATION FOR BODY 0 FACE 8
EGADS : CREATING TESSELLATION FOR BODY 0 FACE 9
EGADS : CREATING TESSELLATION FOR BODY 0 FACE 10
EGADS : CREATING TESSELLATION FOR BODY 1 EDGE 19
EGADS : CREATING TESSELLATION FOR BODY 1 EDGE 20
EGADS : CREATING TESSELLATION FOR BODY 1 EDGE 21
EGADS : CREATING TESSELLATION FOR BODY 1 EDGE 22
EGADS : CREATING TESSELLATION FOR BODY 1 EDGE 23
EGADS : CREATING TESSELLATION FOR BODY 1 EDGE 24
EGADS : CREATING TESSELLATION FOR BODY 1 EDGE 25
EGADS : CREATING TESSELLATION FOR BODY 1 EDGE 26
EGADS : CREATING TESSELLATION FOR BODY 1 EDGE 27
EGADS : CREATING TESSELLATION FOR BODY 1 EDGE 28
EGADS : CREATING TESSELLATION FOR BODY 1 EDGE 29
EGADS : CREATING TESSELLATION FOR BODY 1 EDGE 30
EGADS : CREATING TESSELLATION FOR BODY 1 FACE 11
EGADS : CREATING TESSELLATION FOR BODY 1 FACE 12
EGADS : CREATING TESSELLATION FOR BODY 1 FACE 13
EGADS : CREATING TESSELLATION FOR BODY 1 FACE 14
EGADS : CREATING TESSELLATION FOR BODY 1 FACE 15
EGADS : CREATING TESSELLATION FOR BODY 1 FACE 16
EGADS : EGADS TESS CREATED
EGADS : CHECK TESS FACE NODE MAP
EGADS : CHECKING NODE MAP FOR BODY 0 FACE 1
EGADS : CHECKING NODE MAP FOR BODY 0 FACE 2
EGADS : CHECKING NODE MAP FOR BODY 0 FACE 3
EGADS : CHECKING NODE MAP FOR BODY 0 FACE 4
EGADS : CHECKING NODE MAP FOR BODY 0 FACE 5
EGADS : CHECKING NODE MAP FOR BODY 0 FACE 6
EGADS : CHECKING NODE MAP FOR BODY 0 FACE 7
EGADS : CHECKING NODE MAP FOR BODY 0 FACE 8
EGADS : CHECKING NODE MAP FOR BODY 0 FACE 9
EGADS : CHECKING NODE MAP FOR BODY 0 FACE 10
EGADS : CHECKING NODE MAP FOR BODY 1 FACE 11
EGADS : CHECKING NODE MAP FOR BODY 1 FACE 12
EGADS : CHECKING NODE MAP FOR BODY 1 FACE 13
EGADS : CHECKING NODE MAP FOR BODY 1 FACE 14
EGADS : CHECKING NODE MAP FOR BODY 1 FACE 15
EGADS : CHECKING NODE MAP FOR BODY 1 FACE 16
Volume mesh:
Number of nodes = 869207
Number of elements = 5061876
Number of triangles = 151708
Number of quadrilatarals = 0
Number of tetrahedrals = 4910168
Number of pyramids = 0
Number of prisms = 0
Number of hexahedrals = 0
Writing SU2 file ....
Finished writing SU2 file
Getting CFD boundary conditions
Boundary condition name - Farfield
Boundary condition name - Wing
Done getting CFD boundary conditions
Writing SU2 data transfer files
Writing SU2 Motion File - aeroelasticIterative_motion.dat
Warning: The su2 cfg file will be overwritten!
Write SU2 configuration file for version "Harrier (8.0.1)"
==> Running SU2......
-------------------------------------------------------------------------
| ___ _ _ ___ |
| / __| | | |_ ) Release 8.0.0 "Harrier" |
| \__ \ |_| |/ / |
| |___/\___//___| Suite (Computational Fluid Dynamics Code) |
| |
-------------------------------------------------------------------------
| SU2 Project Website: https://su2code.github.io |
| |
| The SU2 Project is maintained by the SU2 Foundation |
| (http://su2foundation.org) |
-------------------------------------------------------------------------
| Copyright 2012-2023, SU2 Contributors |
| |
| SU2 is free software; you can redistribute it and/or |
| modify it under the terms of the GNU Lesser General Public |
| License as published by the Free Software Foundation; either |
| version 2.1 of the License, or (at your option) any later version. |
| |
| SU2 is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| Lesser General Public License for more details. |
| |
| You should have received a copy of the GNU Lesser General Public |
| License along with SU2. If not, see <http://www.gnu.org/licenses/>. |
-------------------------------------------------------------------------
Parsing config file for zone 0
----------------- Physical Case Definition ( Zone 0 ) -------------------
Compressible Euler equations.
Mach number: 0.294118.
Angle of attack (AoA): 0 deg, and angle of sideslip (AoS): 0 deg.
No restart solution, use the values at infinity (freestream).
Dimensional simulation.
The reference area is 4240 m^2.
The semi-span will be computed using the max y(3D) value.
The reference length is 195.346 m.
Reference origin for moment evaluation is (55.4263, 0, 0).
Surface(s) where the force coefficients are evaluated: BC_1.
Surface(s) plotted in the output file: BC_1.
Surface(s) affected by the design variables: BC_1.
Input mesh file name: ../aflr3/aflr3_CAPS.su2
--------------- Space Numerical Integration ( Zone 0 ) ------------------
Roe (with entropy fix = 0.001) solver for the flow inviscid terms.
Standard Roe without low-dissipation function.
Second order integration in space, with slope limiter.
Venkatakrishnan slope-limiting method, with constant: 0.05.
The reference element size is: 1.
Gradient for upwind reconstruction: inverse-distance weighted Least-Squares.
Gradient for viscous and source terms: inverse-distance weighted Least-Squares.
--------------- Time Numerical Integration ( Zone 0 ) ------------------
Local time stepping (steady state simulation).
Euler implicit method for the flow equations.
FGMRES is used for solving the linear system.
Using a ILU(0) preconditioning.
Convergence criteria of the linear solver: 1e-06.
Max number of linear iterations: 10.
V Multigrid Cycle, with 2 multigrid levels.
Damping factor for the residual restriction: 0.75.
Damping factor for the correction prolongation: 0.75.
No CFL adaptation.
+-------------------------------------------+
| MG Level| Presmooth|PostSmooth|CorrectSmo|
+-------------------------------------------+
| 0| 1| 0| 0|
| 1| 2| 0| 0|
| 2| 3| 0| 0|
+-------------------------------------------+
Courant-Friedrichs-Lewy number: 10
------------------ Convergence Criteria ( Zone 0 ) ---------------------
Maximum number of solver subiterations: 5.
Begin convergence monitoring at iteration 5.
Residual minimum value: 1e-14.
Cauchy series min. value: 1e-10.
Number of Cauchy elements: 100.
Begin windowed time average at iteration 0.
-------------------- Output Information ( Zone 0 ) ----------------------
File writing frequency:
+------------------------------------+
| File| Frequency|
+------------------------------------+
| RESTART| 250|
| SURFACE_CSV| 250|
| TECPLOT| 250|
| SURFACE_TECPLOT| 250|
+------------------------------------+
Writing the convergence history file every 1 inner iterations.
Writing the screen convergence history every 1 inner iterations.
The tabular file format is CSV (.csv).
Convergence history file name: history.
Forces breakdown file name: forces_breakdown_aeroelasticIterative.dat.
Surface file name: surface_flow_aeroelasticIterative.
Volume file name: flow_aeroelasticIterative.
Restart file name: restart_flow_aeroelasticIterative.dat.
------------- Config File Boundary Information ( Zone 0 ) ---------------
+-----------------------------------------------------------------------+
| Marker Type| Marker Name|
+-----------------------------------------------------------------------+
| Euler wall| BC_1|
+-----------------------------------------------------------------------+
| Far-field| BC_2|
+-----------------------------------------------------------------------+
-------------------- Output Preprocessing ( Zone 0 ) --------------------
WARNING: SURFACE_PRESSURE_DROP can only be computed for at least 2 surfaces (outlet, inlet, ...)
Screen output fields: TIME_ITER, OUTER_ITER, INNER_ITER, CUR_TIME, TIME_STEP, WALL_TIME, RMS_DENSITY, RMS_MOMENTUM-X, RMS_MOMENTUM-Y, RMS_ENERGY, EFFICIENCY
History output group(s): ITER, TIME_DOMAIN, WALL_TIME, RMS_RES, AERO_COEFF
Convergence field(s): RMS_DENSITY
Warning: No (valid) fields chosen for time convergence monitoring. Time convergence monitoring inactive.
Volume output fields: COORDINATES, SOLUTION, PRIMITIVE
------------------- Geometry Preprocessing ( Zone 0 ) -------------------
Three dimensional problem.
869207 grid points.
4910168 volume elements.
2 surface markers.
151672 boundary elements in index 0 (Marker = BC_1).
36 boundary elements in index 1 (Marker = BC_2).
4910168 tetrahedra.
Setting point connectivity.
Renumbering points (Reverse Cuthill McKee Ordering).
Recomputing point connectivity.
Setting element connectivity.
Checking the numerical grid orientation.
All volume elements are correctly orientend.
All surface elements are correctly orientend.
Identifying edges and vertices.
Setting the control volume structure.
Volume of the computational grid: 5.96352e+10.
Searching for the closest normal neighbors to the surfaces.
Storing a mapping from global to local point index.
Compute the surface curvature.
Max K: 122.726. Mean K: 4.02927. Standard deviation K: 11.959.
Checking for periodicity.
Computing mesh quality statistics for the dual control volumes.
+--------------------------------------------------------------+
| Mesh Quality Metric| Minimum| Maximum|
+--------------------------------------------------------------+
| Orthogonality Angle (deg.)| 42.0582| 87.4998|
| CV Face Area Aspect Ratio| 1.02246| 6063.72|
| CV Sub-Volume Ratio| 1.00664| 97979.3|
+--------------------------------------------------------------+
Setting the multigrid structure.
+-------------------------------------------+
| MG Level| CVs|Aggl. Rate| CFL|
+-------------------------------------------+
| 0| 869207| 1/1.00| 10|
| 1| 142422| 1/6.1| 8.2081|
| 2| 21672| 1/6.57| 6.57316|
+-------------------------------------------+
Finding max control volume width.
Semi-span length = 97.6729 m.
Wetted area = 8795.17 m^2.
Area projection in the x-plane = 681.447 m^2, y-plane = 449.382 m^2, z-plane = 4224.13 m^2.
Max. coordinate in the x-direction = 123.552 m, y-direction = 97.6729 m, z-direction = 4.71806 m.
Min. coordinate in the x-direction = 49.9621 m, y-direction = -97.6729 m, z-direction = -8.47903 m.
Checking if Euler & Symmetry markers are straight/plane:
Boundary marker BC_1 is NOT a single plane.
Computing wall distances.
-------------------- Solver Preprocessing ( Zone 0 ) --------------------
Inviscid flow: Computing density based on free-stream
temperature and pressure using the ideal gas law.
Force coefficients computed using free-stream values.
-- Models:
+------------------------------------------------------------------------------+
| Viscosity Model| Conductivity Model| Fluid Model|
+------------------------------------------------------------------------------+
| -| -| STANDARD_AIR|
+------------------------------------------------------------------------------+
-- Fluid properties:
+------------------------------------------------------------------------------+
| Name| Dim. value| Ref. value| Unit|Non-dim. value|
+------------------------------------------------------------------------------+
| Gas Constant| 287.058| 1| N.m/kg.K| 287.058|
| Spec. Heat Ratio| -| -| -| 1.4|
+------------------------------------------------------------------------------+
-- Initial and free-stream conditions:
+------------------------------------------------------------------------------+
| Name| Dim. value| Ref. value| Unit|Non-dim. value|
+------------------------------------------------------------------------------+
| Static Pressure| 101325| 1| Pa| 101325|
| Density| 1.22498| 1| kg/m^3| 1.22498|
| Temperature| 288.15| 1| K| 288.15|
| Total Energy| 211798| 1| m^2/s^2| 211798|
| Velocity-X| 100.087| 1| m/s| 100.087|
| Velocity-Y| 0| 1| m/s| 0|
| Velocity-Z| 0| 1| m/s| 0|
| Velocity Magnitude| 100.087| 1| m/s| 100.087|
+------------------------------------------------------------------------------+
| Mach Number| -| -| -| 0.294118|
+------------------------------------------------------------------------------+
Initialize Jacobian structure (Euler). MG level: 0.
Initialize Jacobian structure (Euler). MG level: 1.
Initialize Jacobian structure (Euler). MG level: 2.
------------------- Numerics Preprocessing ( Zone 0 ) -------------------
----------------- Integration Preprocessing ( Zone 0 ) ------------------
------------------- Iteration Preprocessing ( Zone 0 ) ------------------
Euler/Navier-Stokes/RANS fluid iteration.
------------------------------ Begin Solver -----------------------------
Simulation Run using the Single-zone Driver
WARNING: SU2 was not compiled for an AVX-capable architecture. Performance could be better,
see https://su2code.github.io/docs_v7/Build-SU2-Linux-MacOS/#compiler-optimizations
WARNING: SU2 was not compiled for an AVX-capable architecture. Performance could be better,
see https://su2code.github.io/docs_v7/Build-SU2-Linux-MacOS/#compiler-optimizations
WARNING: SU2 was not compiled for an AVX-capable architecture. Performance could be better,
see https://su2code.github.io/docs_v7/Build-SU2-Linux-MacOS/#compiler-optimizations
+----------------------------------------------------------------------------------------------------------------------------------------------+
| Time_Iter| Outer_Iter| Inner_Iter| Cur_Time| Time_Step| Time(sec)| rms[Rho]| rms[RhoU]| rms[RhoV]| rms[RhoE]| CEff|
+----------------------------------------------------------------------------------------------------------------------------------------------+
| 0| 0| 0| 0.0000e+00| 0.0000e+00| 3.4901e+01| 0.133403| 2.254433| 1.860795| 5.602509| -0.744827|
| 0| 0| 1| 0.0000e+00| 0.0000e+00| 3.1547e+01| 2.584080| 4.825637| 4.842578| 8.031359| -0.533534|
| 0| 0| 2| 0.0000e+00| 0.0000e+00| 3.0073e+01| 4.027346| 6.414797| 6.285201| 9.489335| 1.969634|
| 0| 0| 3| 0.0000e+00| 0.0000e+00| 2.9355e+01| 5.604219| 7.997273| 7.931849| 11.073725| -8.397526|
| 0| 0| 4| 0.0000e+00| 0.0000e+00| 2.8939e+01| 5.598695| 8.002670| 7.942566| 11.068590| -9.540712|
----------------------------- Solver Exit -------------------------------
Maximum number of iterations reached (ITER = 5) before convergence.
+-----------------------------------------------------------------------+
| Convergence Field | Value | Criterion | Converged |
+-----------------------------------------------------------------------+
| rms[Rho]| 5.59869| < -14| No|
+-----------------------------------------------------------------------+
-------------------------------------------------------------------------
+-----------------------------------------------------------------------+
| File Writing Summary | Filename |
+-----------------------------------------------------------------------+
|SU2 binary restart |restart_flow_aeroelasticIterative.dat|
Writing the forces breakdown file (forces_breakdown_aeroelasticIterative.dat).
|CSV file |surface_flow_aeroelasticIterative.csv|
Writing the forces breakdown file (forces_breakdown_aeroelasticIterative.dat).
|Tecplot binary |flow_aeroelasticIterative.szplt |
Writing the forces breakdown file (forces_breakdown_aeroelasticIterative.dat).
|Tecplot binary surface |surface_flow_aeroelasticIterative.szplt|
Writing the forces breakdown file (forces_breakdown_aeroelasticIterative.dat).
+-----------------------------------------------------------------------+
Warning: there are 218 non-physical points in the solution.
--------------------------- Finalizing Solver ---------------------------
Deleted CNumerics container.
Deleted CIntegration container.
Deleted CSolver container.
Deleted CIteration container.
Deleted CInterface container.
Deleted CGeometry container.
Deleted CFreeFormDefBox class.
Deleted CSurfaceMovement class.
Deleted CVolumetricMovement class.
Deleted CConfig container.
Deleted nInst container.
Deleted COutput class.
-------------------------------------------------------------------------
------------------------- Exit Success (SU2_CFD) ------------------------
==> Running SU2 post-analysis...
==> Running ASTROS pre-analysis...
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 5
Name = leftWingSkin, index = 1
Name = wingRib, index = 2
Name = riteWingSkin, index = 3
Name = wingSpar1, index = 4
Name = wingSpar2, index = 5
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 2
Name = wingSpar1, index = 1
Name = wingSpar2, index = 2
Getting surface mesh for body 1 (of 1)
Body 1 (of 1)
Number of nodes = 425
Number of elements = 482
Number of triangle elements = 0
Number of quadrilateral elements = 482
----------------------------
Total number of nodes = 425
Total number of elements = 482
Mapping Csys attributes ................
Number of unique Csys attributes = 2
Name = leftWingSkin, index = 1
Name = riteWingSkin, index = 2
Getting FEA coordinate systems.......
Number of coordinate systems - 2
Coordinate system name - leftWingSkin
Coordinate system name - riteWingSkin
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = rootConstraint, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 4
Name = leftWingSkin, index = 1
Name = riteWingSkin, index = 2
Name = leftPointLoad, index = 3
Name = ritePointLoad, index = 4
Mapping capsBound attributes ................
Number of unique capsBound attributes = 4
Name = upperWing, index = 1
Name = lowerWing, index = 2
Name = leftTip, index = 3
Name = riteTip, index = 4
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsReference attributes ................
Number of unique capsReference attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 5
Name = leftWingSkin, index = 1
Name = wingRib, index = 2
Name = riteWingSkin, index = 3
Name = wingSpar1, index = 4
Name = wingSpar2, index = 5
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 425
Number of elements = 482
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 482
Aero_Reference value is NULL - No aero reference parameters set
Getting FEA materials.......
Number of materials - 2
Material name - Madeupium
Material name - Unobtainium
No "materialType" specified for Material tuple Unobtainium, defaulting to "Isotropic"
Done getting FEA materials
Getting FEA properties.......
Number of properties - 5
Property name - leftWingSkin
Property name - riteWingSkin
Property name - wingRib
Property name - wingSpar1
Property name - wingSpar2
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - rootConstraint
No "constraintType" specified for Constraint tuple rootConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - pressureAero
No "groupName" specified for Load tuple pressureAero, going to use load name
Done getting FEA loads
Optimization Control tuple is NULL - Default optimization control is used
Getting FEA optimization control.......
Done getting FEA Optimization Control
Design_Variable tuple is NULL - No design variables applied
Design_Constraint tuple is NULL - No design constraints applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Reading SU2 AeroLoad File - surface_flow_aeroelasticIterative.csv
Number of variables = 16
Number of data points = 75838
CAPS Info: Bound 'upperWing' Normalized Integrated 'Pressure'
Rank 0: src = 3.386278e+12, tgt = 3.386278e+12, diff = 1.145576e+03
Reading SU2 AeroLoad File - surface_flow_aeroelasticIterative.csv
Number of variables = 16
Number of data points = 75838
CAPS Info: Bound 'lowerWing' Normalized Integrated 'Pressure'
Rank 0: src = 1.909061e+12, tgt = 1.909061e+12, diff = 8.266602e+00
Reading SU2 AeroLoad File - surface_flow_aeroelasticIterative.csv
Number of variables = 16
Number of data points = 75838
CAPS Info: Bound 'leftTip' Normalized Integrated 'Pressure'
Rank 0: src = 8.910657e+08, tgt = 8.910659e+08, diff = 2.631137e+02
Reading SU2 AeroLoad File - surface_flow_aeroelasticIterative.csv
Number of variables = 16
Number of data points = 75838
CAPS Info: Bound 'riteTip' Normalized Integrated 'Pressure'
Rank 0: src = 4.586933e+08, tgt = 4.586932e+08, diff = 6.994789e+01
Extracting external pressure loads from data transfer....
TransferName = upperWing
Number of Elements = 98 (total = 98)
Extracting external pressure loads from data transfer....
TransferName = lowerWing
Number of Elements = 98 (total = 196)
Extracting external pressure loads from data transfer....
TransferName = leftTip
Number of Elements = 17 (total = 213)
Extracting external pressure loads from data transfer....
TransferName = riteTip
Number of Elements = 17 (total = 230)
Writing Astros grid and connectivity file (in free field format) ....
Finished writing Astros grid file
Writing subElement types (if any) - appending mesh file
Writing Astros instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint cards--each subcase individually
Writing load cards
Writing material cards
Writing property cards
Writing coordinate system cards
==> Running mASTROS......
==> Running ASTROS post-analysis...
==> Running SU2 pre-analysis...
Writing boundary flags
- bcProps.surfaceProp[0].surfaceType = 3
- bcProps.surfaceProp[1].surfaceType = 1
Done boundary flags
Writing SU2 data transfer files
Writing SU2 Motion File - aeroelasticIterative_motion.dat
Warning: The su2 cfg file will be overwritten!
Write SU2 configuration file for version "Harrier (8.0.1)"
==> Running SU2......
-------------------------------------------------------------------------
| ___ _ _ ___ |
| / __| | | |_ ) Release 8.0.0 "Harrier" |
| \__ \ |_| |/ / |
| |___/\___//___| Suite (Mesh Deformation Code) |
| |
-------------------------------------------------------------------------
| SU2 Project Website: https://su2code.github.io |
| |
| The SU2 Project is maintained by the SU2 Foundation |
| (http://su2foundation.org) |
-------------------------------------------------------------------------
| Copyright 2012-2023, SU2 Contributors |
| |
| SU2 is free software; you can redistribute it and/or |
| modify it under the terms of the GNU Lesser General Public |
| License as published by the Free Software Foundation; either |
| version 2.1 of the License, or (at your option) any later version. |
| |
| SU2 is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| Lesser General Public License for more details. |
| |
| You should have received a copy of the GNU Lesser General Public |
| License along with SU2. If not, see <http://www.gnu.org/licenses/>. |
-------------------------------------------------------------------------
----------------- Physical Case Definition ( Zone 0 ) -------------------
Input mesh file name: ../aflr3/aflr3_CAPS.su2
---------------- Grid deformation parameters ( Zone 0 ) ----------------
Grid deformation using a linear elasticity method.
-------------------- Output Information ( Zone 0 ) ----------------------
Output mesh file name: ../aflr3/aflr3_CAPS.su2.
Cell stiffness scaled by distance to nearest solid surface.
------------- Config File Boundary Information ( Zone 0 ) ---------------
+-----------------------------------------------------------------------+
| Marker Type| Marker Name|
+-----------------------------------------------------------------------+
| Euler wall| BC_1|
+-----------------------------------------------------------------------+
| Far-field| BC_2|
+-----------------------------------------------------------------------+
Three dimensional problem.
869207 grid points.
4910168 volume elements.
2 surface markers.
151672 boundary elements in index 0 (Marker = BC_1).
36 boundary elements in index 1 (Marker = BC_2).
4910168 tetrahedra.
----------------------- Preprocessing computations ----------------------
Setting local point connectivity.
Checking the numerical grid orientation of the interior elements.
All volume elements are correctly orientend.
All surface elements are correctly orientend.
Identify edges and vertices.
Setting the bound control volume structure.
Volume of the computational grid: 5.96352e+10.
Info: Ignoring the following volume output fields/groups:
SOLUTION
Volume output fields: COORDINATES
Info: Ignoring the following screen output fields:
RMS_DENSITY, RMS_MOMENTUM-X, RMS_MOMENTUM-Y, RMS_ENERGY, EFFICIENCY
Screen output fields: TIME_ITER, OUTER_ITER, INNER_ITER, CUR_TIME, TIME_STEP, WALL_TIME
Info: Ignoring the following history output groups:
RMS_RES, AERO_COEFF
History output group(s): ITER, TIME_DOMAIN, WALL_TIME
Warning: No (valid) fields chosen for convergence monitoring. Convergence monitoring inactive.
Warning: No (valid) fields chosen for time convergence monitoring. Time convergence monitoring inactive.
--------------------- Surface grid deformation (ZONE 0) -----------------
Performing the deformation of the surface grid.
Updating the surface coordinates from the input file.
------------------- Volumetric grid deformation (ZONE 0) ----------------
Performing the deformation of the volumetric grid.
WARNING: Convexity is not checked for 3D elements (issue #1171).
Completed in 4544.858114 seconds on 1 core.
----------------------- Write deformed grid files -----------------------
|SU2 mesh |../aflr3/aflr3_CAPS.su2 |
|CSV file |surface_deformed.csv |
|Tecplot binary |volume_deformed.szplt |
|Tecplot binary surface |surface_deformed.szplt |
Adding any FFD information to the SU2 file.
------------------------- Finalize Solver -------------------------
Deleted CNumerics container.
Deleted CSolver container.
Deleted CGeometry container.
Deleted CSurfaceMovement class.
Deleted CVolumetricMovement class.
Deleted CConfig container.
Deleted COutput class.
------------------------- Exit Success (SU2_DEF) ------------------------
-------------------------------------------------------------------------
| ___ _ _ ___ |
| / __| | | |_ ) Release 8.0.0 "Harrier" |
| \__ \ |_| |/ / |
| |___/\___//___| Suite (Computational Fluid Dynamics Code) |
| |
-------------------------------------------------------------------------
| SU2 Project Website: https://su2code.github.io |
| |
| The SU2 Project is maintained by the SU2 Foundation |
| (http://su2foundation.org) |
-------------------------------------------------------------------------
| Copyright 2012-2023, SU2 Contributors |
| |
| SU2 is free software; you can redistribute it and/or |
| modify it under the terms of the GNU Lesser General Public |
| License as published by the Free Software Foundation; either |
| version 2.1 of the License, or (at your option) any later version. |
| |
| SU2 is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| Lesser General Public License for more details. |
| |
| You should have received a copy of the GNU Lesser General Public |
| License along with SU2. If not, see <http://www.gnu.org/licenses/>. |
-------------------------------------------------------------------------
Parsing config file for zone 0
----------------- Physical Case Definition ( Zone 0 ) -------------------
Compressible Euler equations.
Mach number: 0.294118.
Angle of attack (AoA): 0 deg, and angle of sideslip (AoS): 0 deg.
No restart solution, use the values at infinity (freestream).
Dimensional simulation.
The reference area is 4240 m^2.
The semi-span will be computed using the max y(3D) value.
The reference length is 195.346 m.
Reference origin for moment evaluation is (55.4263, 0, 0).
Surface(s) where the force coefficients are evaluated: BC_1.
Surface(s) plotted in the output file: BC_1.
Surface(s) affected by the design variables: BC_1.
Input mesh file name: ../aflr3/aflr3_CAPS.su2
--------------- Space Numerical Integration ( Zone 0 ) ------------------
Roe (with entropy fix = 0.001) solver for the flow inviscid terms.
Standard Roe without low-dissipation function.
Second order integration in space, with slope limiter.
Venkatakrishnan slope-limiting method, with constant: 0.05.
The reference element size is: 1.
Gradient for upwind reconstruction: inverse-distance weighted Least-Squares.
Gradient for viscous and source terms: inverse-distance weighted Least-Squares.
--------------- Time Numerical Integration ( Zone 0 ) ------------------
Local time stepping (steady state simulation).
Euler implicit method for the flow equations.
FGMRES is used for solving the linear system.
Using a ILU(0) preconditioning.
Convergence criteria of the linear solver: 1e-06.
Max number of linear iterations: 10.
V Multigrid Cycle, with 2 multigrid levels.
Damping factor for the residual restriction: 0.75.
Damping factor for the correction prolongation: 0.75.
No CFL adaptation.
+-------------------------------------------+
| MG Level| Presmooth|PostSmooth|CorrectSmo|
+-------------------------------------------+
| 0| 1| 0| 0|
| 1| 2| 0| 0|
| 2| 3| 0| 0|
+-------------------------------------------+
Courant-Friedrichs-Lewy number: 10
------------------ Convergence Criteria ( Zone 0 ) ---------------------
Maximum number of solver subiterations: 5.
Begin convergence monitoring at iteration 5.
Residual minimum value: 1e-14.
Cauchy series min. value: 1e-10.
Number of Cauchy elements: 100.
Begin windowed time average at iteration 0.
-------------------- Output Information ( Zone 0 ) ----------------------
File writing frequency:
+------------------------------------+
| File| Frequency|
+------------------------------------+
| RESTART| 250|
| SURFACE_CSV| 250|
| TECPLOT| 250|
| SURFACE_TECPLOT| 250|
+------------------------------------+
Writing the convergence history file every 1 inner iterations.
Writing the screen convergence history every 1 inner iterations.
The tabular file format is CSV (.csv).
Convergence history file name: history.
Forces breakdown file name: forces_breakdown_aeroelasticIterative.dat.
Surface file name: surface_flow_aeroelasticIterative.
Volume file name: flow_aeroelasticIterative.
Restart file name: restart_flow_aeroelasticIterative.dat.
------------- Config File Boundary Information ( Zone 0 ) ---------------
+-----------------------------------------------------------------------+
| Marker Type| Marker Name|
+-----------------------------------------------------------------------+
| Euler wall| BC_1|
+-----------------------------------------------------------------------+
| Far-field| BC_2|
+-----------------------------------------------------------------------+
-------------------- Output Preprocessing ( Zone 0 ) --------------------
WARNING: SURFACE_PRESSURE_DROP can only be computed for at least 2 surfaces (outlet, inlet, ...)
Screen output fields: TIME_ITER, OUTER_ITER, INNER_ITER, CUR_TIME, TIME_STEP, WALL_TIME, RMS_DENSITY, RMS_MOMENTUM-X, RMS_MOMENTUM-Y, RMS_ENERGY, EFFICIENCY
History output group(s): ITER, TIME_DOMAIN, WALL_TIME, RMS_RES, AERO_COEFF
Convergence field(s): RMS_DENSITY
Warning: No (valid) fields chosen for time convergence monitoring. Time convergence monitoring inactive.
Volume output fields: COORDINATES, SOLUTION, PRIMITIVE
------------------- Geometry Preprocessing ( Zone 0 ) -------------------
Three dimensional problem.
869207 grid points.
4910168 volume elements.
2 surface markers.
151672 boundary elements in index 0 (Marker = BC_1).
36 boundary elements in index 1 (Marker = BC_2).
4910168 tetrahedra.
Setting point connectivity.
Renumbering points (Reverse Cuthill McKee Ordering).
Recomputing point connectivity.
Setting element connectivity.
Checking the numerical grid orientation.
There has been a re-orientation of 2382008 TETRAHEDRON volume elements.
There has been a re-orientation of 64946 TRIANGLE surface elements.
Identifying edges and vertices.
Setting the control volume structure.
Volume of the computational grid: 1.72845e+11.
Searching for the closest normal neighbors to the surfaces.
Storing a mapping from global to local point index.
Compute the surface curvature.
Max K: 1565.47. Mean K: 3.59992. Standard deviation K: 22.0309.
Checking for periodicity.
Computing mesh quality statistics for the dual control volumes.
+--------------------------------------------------------------+
| Mesh Quality Metric| Minimum| Maximum|
+--------------------------------------------------------------+
| Orthogonality Angle (deg.)| 0.0334675| 85.2255|
| CV Face Area Aspect Ratio| 1.10599| 2.42085e+06|
| CV Sub-Volume Ratio| 1.07739| 3.87319e+09|
+--------------------------------------------------------------+
Setting the multigrid structure.
+-------------------------------------------+
| MG Level| CVs|Aggl. Rate| CFL|
+-------------------------------------------+
| 0| 869207| 1/1.00| 10|
| 1| 142415| 1/6.1| 8.20796|
| 2| 21730| 1/6.55| 6.57902|
+-------------------------------------------+
Finding max control volume width.
Semi-span length = 371.666 m.
Wetted area = 2.59746e+08 m^2.
Area projection in the x-plane = 1.3403e+08 m^2, y-plane = 3.91188e+06 m^2, z-plane = 7.36094e+06 m^2.
Max. coordinate in the x-direction = 144.926 m, y-direction = 371.666 m, z-direction = 5806.15 m.
Min. coordinate in the x-direction = -201.8 m, y-direction = -367.266 m, z-direction = -221.384 m.
Checking if Euler & Symmetry markers are straight/plane:
Boundary marker BC_1 is NOT a single plane.
Computing wall distances.
-------------------- Solver Preprocessing ( Zone 0 ) --------------------
Inviscid flow: Computing density based on free-stream
temperature and pressure using the ideal gas law.
Force coefficients computed using free-stream values.
-- Models:
+------------------------------------------------------------------------------+
| Viscosity Model| Conductivity Model| Fluid Model|
+------------------------------------------------------------------------------+
| -| -| STANDARD_AIR|
+------------------------------------------------------------------------------+
-- Fluid properties:
+------------------------------------------------------------------------------+
| Name| Dim. value| Ref. value| Unit|Non-dim. value|
+------------------------------------------------------------------------------+
| Gas Constant| 287.058| 1| N.m/kg.K| 287.058|
| Spec. Heat Ratio| -| -| -| 1.4|
+------------------------------------------------------------------------------+
-- Initial and free-stream conditions:
+------------------------------------------------------------------------------+
| Name| Dim. value| Ref. value| Unit|Non-dim. value|
+------------------------------------------------------------------------------+
| Static Pressure| 101325| 1| Pa| 101325|
| Density| 1.22498| 1| kg/m^3| 1.22498|
| Temperature| 288.15| 1| K| 288.15|
| Total Energy| 211798| 1| m^2/s^2| 211798|
| Velocity-X| 100.087| 1| m/s| 100.087|
| Velocity-Y| 0| 1| m/s| 0|
| Velocity-Z| 0| 1| m/s| 0|
| Velocity Magnitude| 100.087| 1| m/s| 100.087|
+------------------------------------------------------------------------------+
| Mach Number| -| -| -| 0.294118|
+------------------------------------------------------------------------------+
Initialize Jacobian structure (Euler). MG level: 0.
Initialize Jacobian structure (Euler). MG level: 1.
Initialize Jacobian structure (Euler). MG level: 2.
------------------- Numerics Preprocessing ( Zone 0 ) -------------------
----------------- Integration Preprocessing ( Zone 0 ) ------------------
------------------- Iteration Preprocessing ( Zone 0 ) ------------------
Euler/Navier-Stokes/RANS fluid iteration.
------------------------------ Begin Solver -----------------------------
Simulation Run using the Single-zone Driver
WARNING: SU2 was not compiled for an AVX-capable architecture. Performance could be better,
see https://su2code.github.io/docs_v7/Build-SU2-Linux-MacOS/#compiler-optimizations
WARNING: SU2 was not compiled for an AVX-capable architecture. Performance could be better,
see https://su2code.github.io/docs_v7/Build-SU2-Linux-MacOS/#compiler-optimizations
WARNING: SU2 was not compiled for an AVX-capable architecture. Performance could be better,
see https://su2code.github.io/docs_v7/Build-SU2-Linux-MacOS/#compiler-optimizations
+----------------------------------------------------------------------------------------------------------------------------------------------+
| Time_Iter| Outer_Iter| Inner_Iter| Cur_Time| Time_Step| Time(sec)| rms[Rho]| rms[RhoU]| rms[RhoV]| rms[RhoE]| CEff|
+----------------------------------------------------------------------------------------------------------------------------------------------+
| 0| 0| 0| 0.0000e+00| 0.0000e+00| 3.3538e+01| 6.300992| 9.267332| 9.331274| 11.770098| 0.054126|
| 0| 0| 1| 0.0000e+00| 0.0000e+00| 3.4691e+01| 6.389360| 9.181309| 9.282834| 11.835518| 0.054548|
| 0| 0| 2| 0.0000e+00| 0.0000e+00| 3.4957e+01| 6.474313| 9.201152| 9.295231| 11.928485| 0.054029|
| 0| 0| 3| 0.0000e+00| 0.0000e+00| 3.4611e+01| 6.514608| 9.211385| 9.302044| 11.972766| 0.053798|
| 0| 0| 4| 0.0000e+00| 0.0000e+00| 3.4653e+01| 6.542493| 9.226906| 9.309881| 12.008868| 0.053970|
----------------------------- Solver Exit -------------------------------
Maximum number of iterations reached (ITER = 5) before convergence.
+-----------------------------------------------------------------------+
| Convergence Field | Value | Criterion | Converged |
+-----------------------------------------------------------------------+
| rms[Rho]| 6.54249| < -14| No|
+-----------------------------------------------------------------------+
-------------------------------------------------------------------------
+-----------------------------------------------------------------------+
| File Writing Summary | Filename |
+-----------------------------------------------------------------------+
|SU2 binary restart |restart_flow_aeroelasticIterative.dat|
Writing the forces breakdown file (forces_breakdown_aeroelasticIterative.dat).
|CSV file |surface_flow_aeroelasticIterative.csv|
Writing the forces breakdown file (forces_breakdown_aeroelasticIterative.dat).
|Tecplot binary |flow_aeroelasticIterative.szplt |
Writing the forces breakdown file (forces_breakdown_aeroelasticIterative.dat).
|Tecplot binary surface |surface_flow_aeroelasticIterative.szplt|
Writing the forces breakdown file (forces_breakdown_aeroelasticIterative.dat).
+-----------------------------------------------------------------------+
Warning: there are 298 non-physical points in the solution.
Warning: 89 reconstructed states for upwinding are non-physical.
--------------------------- Finalizing Solver ---------------------------
Deleted CNumerics container.
Deleted CIntegration container.
Deleted CSolver container.
Deleted CIteration container.
Deleted CInterface container.
Deleted CGeometry container.
Deleted CFreeFormDefBox class.
Deleted CSurfaceMovement class.
Deleted CVolumetricMovement class.
Deleted CConfig container.
Deleted nInst container.
Deleted COutput class.
-------------------------------------------------------------------------
------------------------- Exit Success (SU2_CFD) ------------------------
==> Running SU2 post-analysis...
==> Running ASTROS pre-analysis...
Reading SU2 AeroLoad File - surface_flow_aeroelasticIterative.csv
Number of variables = 16
Number of data points = 75838
CAPS Info: Bound 'upperWing' Normalized Integrated 'Pressure'
Rank 0: src = 2.841708e+12, tgt = 2.841708e+12, diff = 1.305566e+01
Reading SU2 AeroLoad File - surface_flow_aeroelasticIterative.csv
Number of variables = 16
Number of data points = 75838
CAPS Info: Bound 'lowerWing' Normalized Integrated 'Pressure'
Rank 0: src = 2.437758e+12, tgt = 2.437758e+12, diff = 7.556646e+02
Reading SU2 AeroLoad File - surface_flow_aeroelasticIterative.csv
Number of variables = 16
Number of data points = 75838
CAPS Info: Bound 'leftTip' Normalized Integrated 'Pressure'
Rank 0: src = 8.178489e+08, tgt = 8.178488e+08, diff = 7.905755e+01
Reading SU2 AeroLoad File - surface_flow_aeroelasticIterative.csv
Number of variables = 16
Number of data points = 75838
CAPS Info: Bound 'riteTip' Normalized Integrated 'Pressure'
Rank 0: src = 7.880075e+08, tgt = 7.880207e+08, diff = 1.314268e+04
Extracting external pressure loads from data transfer....
TransferName = upperWing
Number of Elements = 98 (total = 98)
Extracting external pressure loads from data transfer....
TransferName = lowerWing
Number of Elements = 98 (total = 196)
Extracting external pressure loads from data transfer....
TransferName = leftTip
Number of Elements = 17 (total = 213)
Extracting external pressure loads from data transfer....
TransferName = riteTip
Number of Elements = 17 (total = 230)
Writing Astros grid and connectivity file (in free field format) ....
Finished writing Astros grid file
Writing subElement types (if any) - appending mesh file
Writing Astros instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint cards--each subcase individually
Writing load cards
Writing material cards
Writing property cards
Writing coordinate system cards
==> Running mASTROS......
==> Running ASTROS post-analysis...
real 91m58.796s
user 92m13.371s
sys 8m55.448s
+ status=0
+ set +x
=================================================
data/session10/2_aeroelastic_Iterative_SU2_Astros.py passed (as expected)
=================================================
*************************************************
*************************************************
=================================================
Did not run examples for:
session08 fun3d
session09 nastran
session11 fun3d+astros
=================================================
All tests pass!
[Execution node] check if [reynolds] is in [[windows10x64]]
Run condition [Execution node ] preventing perform for step [Execute Windows batch command]
[GNU C Compiler (gcc)] Parsing console log (workspace: '/jenkins/workspace/ESP_RegCaps/7.8/CAPS/training/LINUX64')
[GNU C Compiler (gcc)] Successfully parsed console log
[GNU C Compiler (gcc)] -> found 0 issues (skipped 0 duplicates)
[GNU C Compiler (gcc)] Skipping post processing
[GNU C Compiler (gcc)] No filter has been set, publishing all 0 issues
[GNU C Compiler (gcc)] Repository miner is not configured, skipping repository mining
[Clang] Parsing console log (workspace: '/jenkins/workspace/ESP_RegCaps/7.8/CAPS/training/LINUX64')
[Clang] -> found 0 issues (skipped 0 duplicates)
[Clang] Parsing console log (workspace: '/jenkins/workspace/ESP_RegCaps/7.8/CAPS/training/LINUX64')
[Clang] Skipping post processing
[Clang] No filter has been set, publishing all 0 issues
[Clang] Repository miner is not configured, skipping repository mining
[Static Analysis] Successfully parsed console log
[Static Analysis] -> found 0 issues (skipped 0 duplicates)
[Static Analysis] Parsing console log (workspace: '/jenkins/workspace/ESP_RegCaps/7.8/CAPS/training/LINUX64')
[Static Analysis] Successfully parsed console log
[Static Analysis] -> found 0 issues (skipped 0 duplicates)
[Static Analysis] Skipping post processing
[Static Analysis] No filter has been set, publishing all 0 issues
[Static Analysis] Repository miner is not configured, skipping repository mining
[Static Analysis] Parsing console log (workspace: '/jenkins/workspace/ESP_RegCaps/7.8/CAPS/training/LINUX64')
[Static Analysis] Skipping post processing
[Static Analysis] No filter has been set, publishing all 0 issues
[Static Analysis] Repository miner is not configured, skipping repository mining
[Static Analysis] Reference build recorder is not configured
[Static Analysis] No valid reference build found
[Static Analysis] All reported issues will be considered outstanding
[Static Analysis] No quality gates have been set - skipping
[Static Analysis] Health report is disabled - skipping
[Static Analysis] Created analysis result for 0 issues (found 0 new issues, fixed 0 issues)
[Static Analysis] Attaching ResultAction with ID 'analysis' to build 'ESP_RegCaps/CASREV=7.8,ESPTEST=CAPS/training,ESP_ARCH=LINUX64,buildnode=reynolds #676'.
[Checks API] No suitable checks publisher found.
[PostBuildScript] - [INFO] Executing post build scripts.
[PostBuildScript] - [INFO] build step #0 should only be executed on MATRIX
[WS-CLEANUP] Deleting project workspace...
[WS-CLEANUP] done
Finished: SUCCESS