Changes

Summary

1. fix test_pyOCSM to account for updated MESSAGE statement
2. extend MESSAGE to optionally write to a file; modify message test case; update ESP-help and ESP_QuickReference
3. fix memory leak when a UDF returns an error; remove extra prints when udfFlend or udfOffset detect an error; update sanitize targets in Makefile.LINUX
4. allow OFFSET to function properly when the number of Edges in the offset is fewer than the original Body; fix escape-close-parenthesis in ESP_QuickReference; add ability to create periodic SPLINE in sketcher by using SSLOPE(0); add sslope6* test cases
5. add assert in udfOffset to eliminate warnings on gcc
6. fix bug that caused ereped to not work for a named Body; fix bug that added bar at end of file that was being editted in ESP; extend ereped so that it can be applied if there are multiple Bodys on the stack; add ereped8 test case; fix ESP hint associated with ELEVATE command; fix bug when SELECT EGDE with a bounding box was applied to a Body with degenerate Edges; add extractBodys test case; fix array bounds error in udpEqn2body; fix bug in ereped initializations for a single Body
7. remove use of _scaleuv Attribute
8. allow very long message to be sent from browser to server; add setCsmFile instead of setScmFileBeg/Mid/End; if error occurs when processing a timMesg, put the tim back into READY mode; post message when erep is successfully generated; implement udpEqn2body for SheetBodys; update frustrum3 test case; use __usedBodys__ attribute when computing velocity of Faces or Edges for RULE and BLEND; fix bug in sensCSM that did not reset maximum errors for Bodys when in -tess mode; fix big that did not copy .hasdots during RESTORE . (dot)
9. update Makefile.LINUX64
10. add udfDumpPmtrs and associated test case; implement RESTORE .. (dot dot) to duplicate all Bodys (and Mark) back to the Mark and RESTORE ... (dot dot dot) to duplicate entire stack; add restore3 test case; allow UDF to not return a Body or Bodys; update udfOffset so that it can handle concave corners (but not case where Edges disappear)
11. temporarily remove offset9* test cases
12. update udfOffset for negative distance
13. fix hint associated with JOIN; change JOIN so that it can make non-manifold WireBodys; modify numWireBody* test cases; create ELEVATE command, which only elevates WireBody to SheetBody and SheetBody to SolidBody; remove COMBINE command and instruct user to use JOIN and ELEVATE instead; update UNION and JOIN such that if toMark is set but the operation fails, the stack is left unaltered; add unionSolids* test cases; fix typos in ESP-help (and OpenCSM.h)
14. add (unneeded) initializations in udfOffset to resolve incorrect lint complaints
15. implement udpEqn2body for WireBodys; modify inflatedBody2b to use the replicate.udc; implement udfOffset; create offset* test cases; improve error handling associated with SELECT SORT; modify flend5* test cases to use udfOffset
16. uprev to v1.22
17. fix bug that did not update at-parameters for REORDER command; fix bug that changed the input Body to REORDER; fix sensitivity bug whan a RULE/BLEND xsect is RESTOREd after being used
18. initialize *info in ocsmBodyDetails; return sensible error message when a SET is applied to a CONPMTR, CFGPMTR, or DESPMTR
19. update duct7.vfy files
20. return stub.py to expected state at beginning of tutorial6
21. add wingBEM2 test case; add duct7 test case; add replicate.udc and ereped6* and ereped7 test cases; add sharpFin test case; typo fix in documentation
22. protect for degenerate Edges in sensCSM; fix ESP bug that dropped user out of CapsMode if a non-existant pyscript is attempted; update ESP_QuickReference
23. update compare1b.vfy
24. fix bug in computing tessellation sensitivities for a NodeBody
25. try invEvaluateGuess for very hard cases in udfCompare; update compare1b test case
26. fix bug in IDE that did not properly journal updates to the intent phrase
27. second cut at tutorial6 write-up
28. more documentation updates
29. remove erroneous non-manifold warning associated with NodeBodys
30. fix bug when visualizing new-style quads and .mixed=NULL; do not process _makeQuads on a Face if the Body has a _makeQuads Attribute
31. fix bug in ESP.js that did not properly clear the display when velocities were cleared
32. fix bug that did not persist Edge Attributes to new non-manifold Edges that are generated by EXTRACTing Faces; add attributeA test case; add duct6 test case
33. fix bug in ESP.js associated with clearing velocities for a scalar; update tutorials 1 to 5 for v1.21
34. modify way python is initialized and finalized to work around a problem in numpy - take 2
35. modify way python is initialized and finalized to work around a problem in numpy
36. copy CFGPMTRs and DESPMTRs from temporary CAPS MODL back into the ESP MODL in CapsCommit and CapsSuspend; automatically rebuild MODL in CapsCommit and CapsSuspend
37. fix recently-added typo to timPyscript.c
38. add sanitize-thread target to Makefile.DARWIN64
39. fix error message associated with not enough arguments to SPHERE; fix bug when user double-clicks in MessageWindow (Chrome and Safari)
40. fix setting of PYTHONHOME for a double-quoted string
41. generate WARNING if importing an .egads file that has an Attribute that cannot be evaluated
42. remove debug print statement
43. remove side effects from assert() statements, which work differently on Windoze
44. allow pyscripts to end without a newline
45. fix bug associated with finishing non-manifold WireBodys
46. allow overlay to execute a mesg even when in TIM_EXECUTING; update tutorial6 files
47. remove debug printing of long cast
48. suppress profile printing if outLevel==0; fix filename updates in ESP after saving new file and after exporting the feature tree
49. limit size of inflatedBody2a to reduce its CPU time
50. add tutorial6/model2c
51. numerous updates
52. add sub03 and f104 to studentGallery
53. remove try/catch from IDE demo pyscript files; use skeletonAIM instead of jfd3AIM in IDE demo; only show Display table entries (Node/Edge/Face/Csystem/Pips) if it contains any child entities; fix sensitivity bug associated with UDP/UDFs that requires finite differences coupled with an OUTPMTR that is tied to a mass property; add udpTest; initial commit of new timGloves and associated files
54. add ocsmPrintProfile to explicitly print the profile of CPU usage (instead of printing automatically during ocsmBuild); automagically run pyscript.py when running in continuation mode; change Cvals via script when in CAPS mode; change DESPMTRs via script when in CAPS mode; offer to steal capsLock in CAPS mode; add ogive* test cases
55. protect non-script caps_ calls with caps_debug; fix bug in timCapsMode that sometimes reverted to original .csm file; update demo_tim.txt; remove duplicate entries from ListHistory; fix typo in ESP-help associated with EVALUATE command
56. remove -caps command-line option (replaced by timCapsMode); add cleanup process in pyscript.py only between scripts (not at end); fix bug that did not profile MESSAGE statements; reset profile info at beginning of ocsmBuild; fix bug that did not print OUTPMTRs during call to ocsmPrintPmtrs
57. compile serveESP in Makefile and NMakefile
58. inform user when CAPS overrides .csm value(s); first attemp at re-running pyscript in continuation mode
59. add indication for Phases that are a predecessor of current Phase in ListPhases
60. add calls to caps_debug around List* messages in timCapsMode; update data/ide/*.py to directly rebuild the geometry; reorder Caps menu options
61. fix ListHistory in timCapsMode
62. update demo_tim.txt
63. modify demo_caps.txt and demo_tim.txt; make changes needed to make both demos operate properly
64. fix stanalyzer error
65. more modifications to support timCapsMode
66. temporary commit to be used for debugging
67. remove debug print statement
68. additional bugs fixed in timCapsMode; add unequalRules test case to show how to RULE between xsects with different nnumber of Edges
69. remove temporary printf statements
70. rename capsIde to capsMode; restrict SPHEREs to have a positive radius; allow multiple ESP-help tabs in browser; partial implementation of timCapsMode
71. revert previous commit
72. fix previous commit
73. remove unneeded windoze headers from tim.c
74. Fix continuation marker in serveESP.mak
75. Fix headers for Windows in timPyscript
76. fix windoze problem with includes in pervious commit
77. only allow one open ESP-help tab at a time; implement timFlowchart; modify interpolateUpper.py and conserveUpper.py to demonstrate flowcharting tool
78. allow for .py scripts to run both in serveESP -caps and in python; add ocsmSetAuxPtr and ocsmGetAuxPtr in OpenCSM API
79. fix stanalyzer problem in timCapsIde.c
80. update serveESP.mak in previous commit to include timCapsIde.obj
81. change display scaling so that if there is only one NodeBody it still gets displayed; initial implementation of timCapsIde
82. allow nesting of TIMs to MAX_TIM_NESTING=10
83. fix bugs in File->Open and File->Edit for cases with and without UDCs
84. fix bug in ocsmSave that did not write DIMENSION statements correctly when writing either a .csm or .cpc file with a variable nrow and/or ncol; update calls to caps_open to handle UDCs
85. change -caps mode to accommodate both fore- and back-slashed in filenames; use ocsmTessellate in serveESP; update serveESP.make and serveESP.mak to define USING_CAPS (so that serveESP can be built without CAPS); remove unneeded code that generates a warning with new clang version; use updated caps_open so that cases with UDCs work properly
86. remove unneeded code that generates a clang warning
87. add ocsmAdjustUDCs to OpenCSM API to copy all UDCs to the same directory as the .csm file; implement File->New, File->Open, and File-Edit->OK in caps mode
88. more improvements for ListHistory; use caps_open in read-only mode in ListPhases and ListHistory
89. do not let esp.UpdateESP rebuild (force rebuild in .py script)
90. extend ListHistory to GEOMETRYIN and GEOMETRYOUT
91. update Makefiles for cases without python; add many features to -caps mode; add data/ide/* to test -caps mode; fix many bugs in -caps mode; expose ocsmTessellate
92. Makefile updates to supress Python builds
93. first implementation of CAPS menu in ESP
94. allow branching of Phases when running serveESP in -caps mode
95. caps_PrintObjects signature changed
96. allow wild-carding (with 0) in SELECT ADD and SELECT SUB; update connect9a and connect9b; update Makefile.DARWIN64 for 3-way testing
97. in timViewer, use smoothing shading when looking at BOUNDS; allow wild-carding (with 0) in SELECT ADD and SELECT SUB; update Makefile.DARWIN64 for 3-way testing
98. add viewing of BOUNDS in timViewer; allow GetToken in tim.c to work if the text string does not end in a delimiter; improve error message generated when SKVAR does not contain triplets; improve CAPS summary at end if running in -caps mode
99. in timViewer, use a tessellation associated with the AIM if available, otherwise share the tessellation with OpenCSM
100. fix (long) cast in previous commit
101. extend STORE such that if index=-1, the first available index is used; fix bug that generated two copies of Bodys on stack when RESTOREing with index<0; if running serveESP in -caps mode, get MODL from CAPS (instead of building it in OpenCSM); extend timViewer to view Bodys associated with an AIM
102. fix bug that either hangs or seg faults serveESP if user closes browser while timPyscript is executing. this is done by not calling Py_Finalize, which will result in a memory leak; fix bug that occasionally does not show pyscript file when serveESP is starterd with a .py file
103. fix bug in esp.py to account from change from timPython to timPyscript
104. improve error message when project.csm exists before the project directorry when running serveESP in -caps mode
105. improve the creation, editting, and removal of Caps Values in -caps mode; allow multi-valued Caps Values in ESP; add udfShadow and shadow* test cases
106. added numpts argument to udpKulfan, which helps avoid small dimples near the leading edge of a very thin section
107. add debug GRAFICs to udpKulfan
108. add SELECT LOOP to get Edges associated with a Loop in a Face; allow unary + or - in front of (multi-valued) Parameter when used alone in an expression; add sectionsWithHoles* test cases
109. create hollowSheet and hollowSolid test cases to show all possibile uses of HOLLOW command; improve description of HOLLOW in OpenCSM.h; if HOLLOW fails, input Body is left on the stack; add hollowE* test cases to show some of the limitations of HOLLOW; change timPython to timPyscript to get around problems with linking with python on Windoze; have OpenCSM return SUCCESS even when all the Bodys have been recycled; put note in ESP-help and OpenCSM.h that warns users that results from HOLLOW and SWEEP may be unpredicable due to OpenCASCADE issues; add timPlotter and plotter* test cases
110. fix bug in ocsmPrintEgo when called on BSPLINE Curve or Surface; require positive scale factors in udfNuscale when applied to a SolidBody; add initial version of timPlotter and test cases; change GetToken in tim.c so that tokens can have unlimited length
111. fix errors that occur because Py_Finalize cannot be used more than once (because of a numpy bug); fix bug that did not show Cvals for -caps runs in serveESP and Brchs when running without -caps
112. update Caps Value handling in ESP
113. do not show Branches in serveESP when in -caps mode; allow serveESP to change .csm file when in -caps mode; fix OpenCSM.c to remove stanalizer error
114. for a UDP/UDF, only use finite differences if one of its arguements is ATTRREAL and has non-zero dots
115. add growing3.py test case
116. modify timPython to get around numPy problems associated with Py_Finalize; modify tim interface to allow a tim to perform cleanup at the end of serveESP
117. fix tessellation sensitivity bug associated with SheetBodys that are INTERSECTed with a SolidBody; add designP5* test cases; fix Node sensitivity for two parallel Edges; move timViewer from Makefile to serveESP.make; add tufts for Nodes when displaying tessellation sesnitivities in serveESP; ensure that tessellation sensitivities on the boundaries of Face and ends of Edges agree with Edge and Node sensitivities; update .tsen files
118. remove serveESP from Makefile and NMakefile; create serveESP.make and serveESP.mak
119. index.lt.0 in RESTORE is now a wildcard, meaning that Bodys in all storages that match name are put onto the stack; initial integration of CAPS into serveESP
120. update ESP_QuickReference; update ESP so that double-clicking in MessageWindow takes you to filename:linenum that is clicked on, else takes you to last filename:linenum in MessageWindow; update sensCSM to use RMS errors; reduce ratio of errors for alerts from 5 to 2; update .gsen and .tsen files for 7.4.1 and 7.6.0
121. fix ocsm.def for last commit
122. implement Debug in .csm editor; fix a few bugs in parent/child Body pointers
123. fix bugs associated with running a .py file
124. improve tessellation sensitivities for Edges and Faces that are not trimmed by a boolean operation; update .tsen files
125. update to special plotting associated with Face velocities for INTERP_VEL=6
126. update CAPS/myPlane for intent 4 (avl) and 5 (bem)
127. .py files are automatically edited in serveESP
128. add quad3 and quad4 test cases
129. fix bug if user with ball loaded a new .csm file and then editted (where user without ball saw wrong file); adjust closeBody2 test case to REORDER the Edges so that all the Faces point outward; inform users if someone has joined or left a collaboration; modify visualization of grids on Faces in serveESP * new-style quads if _makeQuads attribute on Body (.tessType==Quad or .tessType==Mixed) * old-style quads if _makeQuads attribute on Faces (npatch>0) * triangles oherwise; fix valgrind error in sensCSM
130. check for proper result types from SWEEP; check mass props before topology in verification files; add verification data for OpenCASCADE 7.6.0; change copyright to 2022; give @version a value before the first Body is built; allow DIMENSIONed variable to be returned from a UDC; update expressions test case to demonstrate multi-value returns
131. more improvements to udfCompare (and fix sanitizer error); update GRAFIC plots of trim curves to show the points on the Pcurves; increase size of plot points in serveESP; add fixture* test cases
132. update Makefile.LINUX64; fix typo in mitten2.py
133. add ability of specifying color of items in a plotfile; change udfCompare to group bad points based upon the magnitude of the error; update udfCompare to check distances from Nodes and Edges as well as distances from Faces
134. update documentation for DUMP in OpenCSM.h
135. create ESP-viewer.js; pass callbacks to overlay if they exist; reorganize python test cases; change verification tests to include serveESP
136. update timViewer to be able to make changes to the scene graph; add ocsmLoadFromModel to pyOCSM; add shapes test case; fix initialization bug in ocsm.py
137. remove timViewModl from timPython.def
138. update test.py to remove call to removed esp.ViewModl()
139. add ability to hold python execution while an overlay (viewer) is executing; update viewer.py
140. change locking mechanism for tim_mesg to use ThreadWait instead of a mutex
141. fix bug that did not release the lock if tim_mesg is in holding mode
142. fix mutex problems associated with tim_mesg
143. fix lint error in tim.c
144. add timViewer and associated test cases; create mechanism to allow a TIM to call a TIM; fix a few typos in ESP-help
145. updates to Windoze .def files
146. Fix up ocsm.def to include GetToken (whose name should probably change)
147. Windoze tim.def file fix
148. Windoze tim.def file fix
149. Windoze ocsm.def file fix
150. fix bug in udfNuscale when zscale=0; first cut at calling a TIM from the python TIM
151. do not change outLevel if ocsmSetOutLevel is called with negative argument; add printout for outLevel.ge.2 when TIM broadcasts a message to the browsers; add option to plot trim curves associated with all Faces
152. fix Makefile and NMakefile associated with previous commit
153. reorganize way TIMs broadcast messages out to the browsers
154. use new BLEND C0 treatment, including in sensitivities; fix bug in timMitten associated with cleanup
155. add .tsen data for 7.3.1
156. remove special sensitivity treatment for BLENDs with C0; update sensCSM verification data; add blend22* and rule22 test cases
157. add closeBody* test cases; add collab* test cases; add documentation about what happens for a 0 in either SELECT ADD or SELECT SUB statement
158. fix bug associated with MALLOCs in udpWaffle
159. fix bug associated with MALLOCs in udpWaffle
160. fix typo in error message associated with COMBINE command; make error messages from udpWaffle more explicit
161. remove Windoze warnings from previous commit
162. fix bug so that wv_broadcastText is not called by a TIM when running in batch mode
163. improve sensitivities associated with tip treatments in BLEND; update designG5 and designG6 test cases
164. update timMesg so that it does not return a response; allow non-*host* to initiate file editting; fix bug that does not give appropriate error messages when having trouble opening a .py file from the command line; fix bug that does not give appropriate error messages when timPython has trouble opening a file from Tools->Python
165. add IFTHEN/ENDIF to udpWaffle; add waffleA* test cases; update Makefile.LINUX64; fix bug that lost ball if user with ball sends a message
166. update to latest version of Tblade3; allow default xaxis=0, yaxis=0, and zaxis=0 in ROTATEX, ROTATEY, and ROTATEZ; add rotate1 test case; add LAYOUT to udpWaffle; add waffle3* test case; fix memory leak associated with mprp arrays
167. missed designU1c.tsen in previous commit
168. remove tim_data from TIM interface (no longer needed); change NXSECT argument in udpGuide to ATTRREAL so that finite difference sensitivities are triggered; remove RAD argument to udpBox in designI2 and designI4 so that finite differences are not triggered; fix bug that re-computed velocities when re-computation was not necessary; fix bug associated with sensitivities of mass properties
169. update timPython to post stdout to the MessageWindow while python is executing; fix postMessage so that blanks lines between messages are eliminated
170. fix bug introduced in previous commit
171. fix bug in previous commit; add ocsmLoadFromModel function; add withTess=0 argument to DUMP command; add dumpTest* test cases; update Makefile.DARWIN64.gcc
172. updates to way PYTHONHOME is found in timPython; add designV1 test case; set sgFocus in timMitten so that it can start with an empty MODL
173. fix hint for SCALE in ESP; shorten hint time-out in ESP to 15 sec; fix bug in timPython that did not register MesgCB and SizeCB after a timLoad (which caused a problem if started with a .py file); add (not-yet-implemented) Debug option in ESP editor; update ESP editor so that users without the ball can see the edits as they happen; clean up unneeded routines in TIMs; add debug and debugged testcases; add designU* test cases
174. For timPython, put Python lib location in rpath
175. Build timPython on Windows
176. Allow for building TIMs outside of OpenCSM/src
177. fix bug that did not remove UDP cache entries when a Body was deleted (such as during recycling); do not consider DEGENERATE Edges when SELECTing either by bounding box of nearest-to
178. Dynamic Web Server library cleanup
179. update Makefile.DARWIN64 to get rpath correct when running a script directly in python (and not serveESP); allow CONPMTR statement if at top-level scope; update scope test case; fix bug that did not compute sensitivity correctly when a DESPMTR was used in an include-type UDC
180. change button to yellow and RunningPython while python is running; update Makefile.DARWIN64 to get rpath correct when running a script directly in python (and not serveESP)
181. fix pyOCSM test errors caused by addition of @scope
182. start getting ready for editing .py files; separate loading and running in timPython; run python in separate thread; add @scope at-parameter; add scope test case
183. add esp.h
184. fix stdout sequencing in timPython; get rid of global data in serveESP; update data/python/test* files
185. fix bug associated with (FD) sensitivities for a MODL with a OUTPMTR being set before a FILLET or CHAMFER; remove code that protects against calls to EG_replaceFaces in SolidBodys with more than one Shell
186. enable esp.SetModl() to see MODL in serveESP after python finishes
187. stub routines added to account for change in tim.def
188. fix bug associated with expressions that contain mass properties; add designT1 test case; fix bug that causes an error to be raised if the mass property sensitivities are computed by FDs before the last Body is built; add designT2 test case; add python mode to CodeMirror; add esp.py
189. add udpTire testing to Makefile.DARWIN64; compute sensitivity correctly with udfCreateBEM, udfCreatePoly, udfEditAttr, udfPrintBbox, udfPrintBrep, and udoPrintEgo; add designS3 test case
190. fix bug in udfGuide that did not work properly for an input SheetBody; add designS* test cases; fix bug that did not compute sensitivities correctly for UDFs when one (or more) of the input Bodys had non-zero velocities
191. add udpBodyList to udp.def for Windoze
192. initial code for proper UDF sensitivity calculations --- not enabled yet
193. modify udfNacelle* test cases to use DESPMTRs; add splitWing* test cases; remove gallery/FJ2 from distribution
194. allow pyOCSM to import an externally-generated MODL; enable timMitten; create timPython and data/python/test*; allow serveESP to start with a .py file
195. uprev to v1.21 (ESP.html, ESP-localhost.html, ESP-help.html, OpenCSM.h, ocsm.rc); create unpublished routine convertToBSplines. modify so that BSPLINES are not reconverted; modify udpParabaloid and udfNuscale to use convertToBSplines. add DEBUG prints in udpNuscale; add sculpt* test cases; add attrProp test case to show how Edge Attributes get propagated to Faces by EXTRUDE and REVOLVE but not by RULE and BLEND. attrProp also shows that Edge Attributes are not carried forward by EXTRUDE, REVOLVE, RULE, or BLEND; make INTERFACE DIM obsolete; issue WARNING to use DIMENSION statement instead; add udfNacelle and udfNacelle* test cases
196. fix bug in StepThru that was introduced when computation of _tParams was delayed
197. fix minor documentation typos
198. fix bug in JOIN associated with Faces that share Edges but which have bounding boxes that differ; add halfSpheres test case; remove spurious printout associated with SKEND command; disable timMitten for v1.20 release
199. fix bug that did not allow a user to EXTRACT multiple Faces from a SolidBody that had an internal hole; add extractShells* test cases; fix memory leak in udpParabaloid; update ESP_QuickReference for v1.20
200. add attrScribe test case; add udpParabaloid and test case
201. implement outLevel in timPlugs; improve -plugs option in serveCSM so that more cases work; mark plugs4c as successful in Jenkins; modify attribute and getattr1 test cases to account for fact that _tParams only exists when Body is recycled
202. fix ocsmGetName prototype in ocsm.py
203. fix long delay when browser without ball syncs display
204. remove inside-out test for SolidBodys to improve performance; move Plugs to a TIM in serveESP; do not add _tParams attribute unless the Body will be tessellated; remove coarseBox test case
205. remove print in tim.c to eliminate Windoze warning
206. remove unistd.h from timMitten.c
207. fix bug that sometimes uses FD sensitivities when analytic derivatives could be used instead (associated with UDPARG statements); change method for setting mass properties so that rebuild is not needed when changing spectrum limits in ESP
208. another attempt to fix Makefiles
209. another attempt to fix Makefiles
210. another attempt to fix Makefiles
211. another attempt to fix Makefiles
212. another attempt to fix Makefiles
213. another attempt to fix Makefiles
214. another attempt to fix Makefiles
215. another attempt to fix Makefiles
216. fix Makefiles for latest commits
217. apply attributes on LINSEG, ARC, CIRARC, BEZIER, SPLINE, and SSLOPE Branches to the Edge that they create; add attrSketch* test cases; remove Gloves and ErepEd from serveCSM; next version of serveESP that uses TIMs; move ErepEd to a TIM in serveESP; move Gloves to a TIM in serveESP; create Mitten as a TIM example
218. small updates to be consistent with recent EGADS changes
219. initial version of serveESP; reorganize udp.c to serve as a pattern for serveESP
220. improve accuracy of udpFreeform; update associated verification data
221. add PLUGS_CREATE_EGADS_FILES to serveCSM; add more info to plugs.hist fille; add data/plugs/showHistory.csm to help debug operation of Plugs; change number of reclassified points in Plugs to be the larger of 5 and a fraction of area associated with a Face
222. more protections in plugs for cases with unclassified points
223. fix plugs bug for unclassified points during reinitializati9on; make plugs1c as expected failure (for now)
224. fix bug in Slugs associated with recent EGADS topology changes
225. fix possible NULL-dereference flagged by stanalyzer
226. fix non-initialized warning message
227. fix CONNECT errors associated with non-contiguous Faces; add connect7f test case; preserve orientation of Faces during EXTRACT; add extract4 test case; add sketch11* test cases; do not include SSLOPE statments when determining if Sketch points are co-planar; update OpenCSM to account for EGADS changes associated with making Faces and degenerate Edges
228. significantly speed up recycling
229. Allow static builds
230. fix typo in previous commit
231. update droopInlet* test cases to use slpfact=-1; compute mass properties only when needed; add warnings when recycling stops
232. match slopes and curvatures at seams in UDP supell when slpfact<0; broadcast view matrix to partners when cursor leaves canvas before mouse up event; reorganize mass property calculations
233. fix bug that did not readjust the level when returning from a UDC; fix bug when the last line of a UDC (without an END statement) calls a UDC (with an END statement); add supell7* test cases
234. fix First and last Node warnings associated with COMBINE and with esa_logo
235. fix bug associated with -dxdd option (incorrectly wrote .tess file instead of .sens file); add mechanism2 test case; add esa_logo test case; add normals to output from EVALUATE FACE command; when SUBTRACTing co-planar SheetBodys, make sure result has same normal as the outer SheetBody; add subtract6j-k test cases; allow -dxdd option to be applied to subscripted DEPMTRs; fix memory leak associated when COMBINE closes a WireBody in order to make a SheetBody; add plotting of normals to DisplayType
236. add ability to print call history during sensitivity calculations; add stickFuselage test case; extend COMBINE command to close WireBody if needed; add combine8* test cases; add splitFlap2* and splitFlap3* test cases; extend CONNECT to work with WireBodys
237. fix bug when starting serveCSM on Windoze from an .egads, .igs, or .stp file for filename with backslashes; add autoStart test case
238. fixed adjoint calculations in massProps; add adjoint* test cases; add testAdjoint target to Makefile.DARWIN64; fix token parsing associated with DOS CR (carriage return) in udpWaffle and udfEditAttr; update tessellation sensitivity verification data; fix bug in mass property derivatives; update sew1, sew2, and import5 to account for improvements in IGES writer; add Curve, Pcurve, and Surface printouts to ocsmPrintEgo; add toler=0 argument to CONNECT command; break Makefile.DARWIN64 up so that test suite can be run in parallel
239. Fix typo in clean target
240. fix bug in latest commit associated with calling a non-existant UDP/UDF; first version of massProps and adjointCSM
241. fix bug in latest commit associated with calling a non-existant UDP/UDF
242. update test_pyOCSM to account for slight change in applyTparams.udc
243. add angle argument to applyTparams.udc; add .tParams attribute to Body too in applyTparams.udc; in udfSlices, if there is a .tParams attribute on the input Body, put it on the slices too; change message in udc loader for cases where file is not found (to avoid Jenkins false positive)
244. fix eqn2body.udc so that it warns (as oposed to errors) if a local variable is being overwritten; fix bug that prematurely exits if UDP does not exist and we are recycling
245. check if a user gave an illegal order to SUBTRACT; add eqn2body.udc and helix* and frustrum* test cases; fix bugs associated with SSLOPE statement (especially when a sketch is flipped); add sketch10* test cases; fix tolerance checking in sketch solvers; add theta[] argument to udpEllipse; add ellipse2 test case
246. upgrade to latest version ot Tblade3; fix a few typos in the documentation; update some training_2021 files; fix comments in contains.udc and overlaps.udc; add assembly3 and assembly4 test cases; allow CATBEG to catch overconstrained and underconstrained errors; generate underconstrained, overconstrained, or not_converged signals from CATEND; add sketch9* test cases; improve convergence tolerance in sketcher; fix sign of dip to minimize residual for S and R constraints in sketcher; ensure that sweep() function always gives sign that is the same as dab
247. add Makefile.DARWIN64.gcc for testing with gcc-10; modify testing procedure to also test against gcc-10; fix memory error associated with reordering senses in loops (inletWithWalls1); fix seg fault if order in INTERSECT is given with leading dollar-sign; check that only valid order are given; fix test cases that used invalid order
248. improve speed of udfEditAttr and udpWaffle (on LINUX) when script is very long
249. uprev to v1.20 (ESP.html, ESP-localhost.html, ESP-help.html, OpenCSM.h, ocsm.rc); fix ESP Hint associated with CONNECT command; extend CONNECT so that it can CONNECT Faces in a single Body if there is a Mark before the last SolidBody; improve detection of matching Edges in CONNECT; add inletWithWalls* test cases
250. fix core dump if opening file in ESP without a filename; fix bug in ESP that made commands not available if File->Open had more Branches than previous model; add description of MessageWindow background colors in Tutorial 1
251. fix error when drawing outline in StepThru mode
252. change DisplayFilter so that it posts help via an alert instead of the MessageWindow; update all tutorials in ESP-help.html
253. do not allow editing of .udc in ESP unless there is a matching .csm or .cpc; if ocsmSave is called to write a .udc file but there is no matching UDPRIM statement, write a include-type UDC
254. allow selection of geometric and tessellation sensitivities for multi-valued DESPMTRs in ESP; update to tutorial files for cases when spindle is not created; fix coloring of children Branches when a DesignParameter is editted in ESP; first attempt at new tutorial descriptions
255. remove unneeded part of tutorial3
256. RESTORE . (dot) now duplicates Body on top of stack; add restore2 test case; return an error from ESP if despmtr change is illegal (such as out of range); modify contains.udc and overlaps.udc so that they leave the stack unchanged; update ESP-help (except tutorials); update ESP_QuickReference
257. add ExpandAll/CollapseAll button in ESP to expand listing of Branches; fix coloring of some Branches in ESP TreeWindow
258. add imprint5 test case (which is expected to fail); move data/tutorial* to data/legacy/tutorial*
259. change the name of configuration sensitivities to geometric sensitivities
260. do not remove previous velocities if call to ocsmSetVel or ocsmSetVelD does not result in a change; fix bug in STORE when overwriting a storage location with a GROUP that contains a different number of Bodys; add group6 test case; fix bug that returned an error when IMPORTing an .egads file that contains a tessellation; add import8* test cases; fix bug in ocsmSave when writing .csm file that has UDPARG statements associated with a UDC; add save1 test case; add save2 test case to ensure that inline inputs to a UDP get saved correctly in ocsmSave; fix out-of-bounds bug when processing inline files associated with a UDP/UDF; change ocsmGetEgo so that it always returns the ego rather than a copy of the ego; add ocsmSetEgo to OpenCSM API, pyOCSM, and test_pyOCSM
261. reorganize pyOCSM files so that python recognizes it as a package
262. update verification data for parsec2* on 7.3.1; update udpWaffle to get its file from a stream; add waffle9b test case; update udpBezier to get its file from a stream; update udpFitcurve to get its file from a stream; modify fitCurve6* test cases; update udpFreeform to get its file from a stream; update udpNurbbody to get its file from a stream; add more nurbbody* test cases
263. minor changes to Makefile.DARWIN64 and Makefile.LINUX64
264. Update updParsec include dependencies
265. update udpParsec; update parsec test cases; add designR* test cases; in removeVels, remove sensitivity cache for any Body created by a UDPRIM (since we do not know what was done inside the UDP)
266. add lock in serveCSM so that browser messages do not interfere with each other when there are multiple browsers; update pyOCSM for latest Windoze/Python 3.9 change; fix SOLBEG iteration message; fix bug in ocsmGetTessVels that did not rebuild perturbation for cases where a UDPARG contained an argument that could not be computed analytically; add more droopInlet* test cases (rounded inlets); add appliedLate test case to show how to apply chamfers and fillets at the end of the build process; fold case in argument names to UDPARG and UDPRIM
267. add lock in serveCSM so that browser messages do not interfere with each other when there are multiple browsers; update pyOCSM for latest Windoze/Python 3.9 change; fix SOLBEG iteration message; fix bug in ocsmGetTessVels that did not rebuild perturbation for cases where a UDPARG contained an argument that could not be computed analytically; add more droopInlet* test cases (rounded inlets); add appliedLate test case to show how to apply chamfers and fillets at the end of the build process; fold case in argument names to UDPARG and UDPRIM
268. extend ocsmGetEgo to allow EBody or tessellation on EBody to be returned; add options to udpSupell to get better end-slopes, which is sometimes needed for very large n abd high apsect ratios; add droopInlet* test cases; fix memory leak in sensCSM -tessel
269. fix memory leaks in udfFlend
270. more improvements to ESP collaboration
271. update IMPORT to use tessellation if .egads file contains one or more tessellations; update UDPRIM to use tessellation if returned model contains one or more tessellations; fix bug in ocsmPrintEgo for cases where MODL contained a TESSELLATION or EBODY; fix memory leaks in udfFlend; improvements to multi-user collaboration
272. change all wv_sendText to wv_broadcastText in serveCSM
273. signal an error when attempting to EXTRACT a degenerate Edge; fix bug in JOIN if toMark is set but there is only one Body after the mark; fix Tblade3 cases that use flends; fix bug in flend that caused out-of-bounds error; first cut at multi-user collaboration in ESP
274. update wingStruct test cases to use JOIN instead of UNION; add many more flend* test cases; add ability to apply flend to a single Body; update flend to work even in cases where tangent vectors are (anti-)parallel
275. fix bug in ocsmCopy to not malloc when minline=0
276. fix bug in ocsmCopy to not malloc when minline=0
277. fix warning message in udfSlices
278. add udfSlices; add slices* test cases
279. fix recently-added bug that did not put attributes on a Body that was recycled via -loadEgads; fix bug in computing tessellation sensitivity at endpoints of Edges; fix allocation bug in sensCSM -tessel; update some .tsen files; fix bug in udfNuscale that caused an abort if input was a FaceBody; add nuscale4 test case; compute tessellation sensitivities for EBodys
280. revise Makefile.DARWIN64 so that target testESP tests -dumpEgads and -loadEgads
281. add more DEBUG information in udfEditAttr; add testBasic2 target in Makefile.DARWIN64; fix bug that wrote Body_xxxxxx.egads file twice if from a UDF; fix bug associated with Edge attributes when Body was recycled via -loadEgads; update to udfEditAttr to account for the fact that windoze does not properly handle ftell() and fseek() if file is opened for read in text mode
282. add more info in key window printout when in ESP-sketch; update Makefile.LINUX64 for use on new ubuntu 20.04 system
283. simplify udfEditAttr code to accomodate stanalyzer
284. more useless guards to pass stanalyzer
285. remove dead code detected by stanalyzer
286. initialize fp to avoid warnings
287. allow color names to be specified in either lowercase or UPPERCASE; fix bug that improperly colored Edges after call to udfEditAttr; fix tessellation sensitivity bug along Edges; add creation of a logdist.plot file that contains triangles with the log(distance) at every Face tessellation point (blue=1e-12, red=1e-03) if sensCSM is called with the -tessel and -despmtr flags; add __hasC0blend__ Attribute so that finite differences are used for sensitivities if a C0 blend has been recycled; update .tsen files; allow UDP/UDF to get its << arguments from a stream instead of a tmp_OpenCSM_xx/yy file; add udpInline* test cases; allow udfEditAttr to get its file from a stream; fix bug that did not properly write inline files associated with a UDPARG statement
288. refactor (simplify) tessellation sensitivities code; update .tsen files; add designQ* test cases
289. add waffle9a test case
290. fix some minor bugs when compiling with GRAFIC; update ESP for recent change to WebViewer; update Makefiles for requirement to compile with c++; minor update to parka to eliminate warning with old gcc
291. Link serveCSM with C++
292. fix important bug in tessellation sensitivities for Faces; allow configuration sensitivities on EEdges and EFaces; add more features to Erep Editor; add ereped5 test case; allow user to show either configuration or tessellation sensitivities in ESP (and make the -tessel flag obsolete in serveCSM); update .tsen files to be consistent with fixed bug in tessellation sensitivities
293. extend ocsmPrintEgo to work for EBodys, ...; add ocsmMakeEBody to OpenCSM API; next version of Erep Editor; add erapAtEnd flag so that ocsmBuild builds EBodys at end based upon _erepAttr and _erepAngle attributes; add new DisplayType in ESP to visualize EBodys if they exist
294. fix problems that were caused by incorrect fix of memory leaks in udfNuscale
295. fix memory leaks in udfNuscale
296. add udfPrintEgo to Makefile and NMakefile
297. first implementation of ErepEd; add ereped* test cases; add udfNuscale to non-uniformly scale a Body (after converting it to all BSPLINES); add nuscale* test cases; fix typo in GetUV in pyOCSM; add nasa_worm test case
298. issue error message if problem generating SPLINE with specified SSLOPE; fix bug associated with flipped Sketch containing an SSLOPE statement; add sslope5* test cases
299. New ifort updates
300. significant speedup in creating sceneGraphMetaData, especially for cases with many Faces and Edges
301. adjust tolerance for detecting colinear points in CIRARC in sketcher
302. (for now) disable _hist and __trace__ in Bodys that are returned from udpCsm (which means that we cannot get sensitivities on the Body returned from udpCsm); add etopo* test cases
303. add A12 to studentGallery
304. fix bug introduced in last attempt to get around false-positives in stanizer
305. another attempt to eliminate lint errors
306. update Makefile for lint options
307. another attempt to pass all Stanalizer tests
308. fix bug associated with CSYSTEMs that was introduced recently; a few more fixups to try to pass ESP_Stanalizer
309. fix bug introduced when making sure code was lint-free
310. fix SHOW_SPLINES so that grafic.h is not needed
311. many changes in order to pass lint and scan-build tests
312. Try to fix stanalyzer errors again
313. Fix jlEGADS makefiles
314. Try to fix stanalyzer errors
315. Suppress gcc-12 warning
316. Effective Topology: apply last change only for EFaces with more than 1 Face
317. Effective Topology: check result of getEdgeUV against invEval and pick the closer
318. A different possible fix for the MemcheckOcsm on the rule28 cases
319. A different possible fix for the MemcheckOcsm on the rule28 cases
320. A possible fix for the MemcheckOcsm on the rule28 cases
321. Effective Topology: Mark Planar/Periodic EFaces not to tessellate Edges based on Face Curvature
322. Fix scan-build warning from last commit again
323. Fix scan-build warning from last commit
324. Effective Topology: Fix NM Sheetbody Node removal
325. Fix NULL bays at end with multiNode Rule
326. Updated ruled sensitvities for multiNode
327. A minor update of the documentation of EG_approximate
328. Update the docs to specify the additions to EG_approximate and EG_ruled
329. Fix _close! function to properly check garbage collection for both egads and egadslite
330. Fix jlEGADS makefiles for zsh
331. jlEGADS makefile adjusments. Other small cleanup.
332. delete manifest from lite
333. now ??
334. egads also used from egadscommon.jl dependencies
335. remove unnecesary ENVS
336. now with actually things inside
337. created egads common folders
338. Rule with Loops of differing number of Edges passes simple test with null 'bay'
339. Can rule with sections of different number of Edges -- still need to check null bays, multiplicity > 1, curved EndCaps & EG_splineGeom_dot
340. Close memory leak in EGADSlite associated with full attributes
341. Fix scan-build problem
342. Fix warning from last commit
343. Second (but incomplete) cut at Rule with differring numbers of Edges
344. Another minor correction to last commit
345. Minor correction to last commit
346. First (but incomplete) cut at Rule with differring numbers of Edges
347. Don't allow for Figure 8 Nodes in ELoops (for now)
348. Another def file fix
349. Add setTessParam to lite def file
350. Updates to egadslite to support pyEGADS.egadslite
351. First cut at pyEGADS.egadslite
352. Remove manifest files for jlEGADS. Check array size for makeGeometry. Fix makeGeometry tests. Some references fixes.
353. Fix some pyEGADS refrencing. Check data length for pyEGADS makeGeometry.
354. Fix topObj during EGADSlite import
355. Add U periodic options to EG_approximate for surfaces
356. try
357. Allow for full attribution in EGADSlite
358. Add reference counting for jlEGADS finalizers. Lots of other jlEGADS cleanup.
359. Fix for last commit
360. Various Julia cleanup and fixes
361. Update julia Makefile
362. Remove jlEGADS environment variable
363. added package install
364. added Makefile
365. first jlEGADS
366. First cut at fitting periodic curves
367. Fix a number of bugs in the Effective Topology
368. Uprev EGADS
369. Forgot DARWIN64.clang and DARWIN64.gcc
370. Move DARWIN64 ifort link flag to support EGADS test builds
371. Fix for ifort on newer versions of macOS
372. Add _USE_MATH_DEFINES for MSVC
373. Add error functions erf and erfc to Surreal
374. README update
375. Config update
376. Fix bug returning wrong parameters in pyEGADS effectiveMap
377. More defensive Surreal defines
378. Some config updates
379. Fix up EMP_ThreadDestroy for the M1
380. Stanalizer fixes for Lazy Surreal
381. Use std c++11 for Surreal tests. Fix in depricated EG_loadTess.
382. Use Lazy Expressions for Surreal for slightly better performance on windoze
383. Minor config changes
384. Config change for Windows to always start browsers in the background
385. Windows configuration change to promote Edge
386. update README.txt with note about Safari block-ups
387. Add makeNmWireBody to pyEGADS
388. Don't clobber LD_LIBRARY_PATH with ESPenv
389. Configuration changes and signature change for EG_makeNmWireBody
390. Documentation updates
391. More Doc updates
392. Some Documentation updates
393. Fix the fix for memory issue with getting units from imports
394. Fix memory issue with getting units from imports
395. Document some of the new updates to SETP/IGES handling
396. Support units on both STEP and IGES exports
397. Add an option to do less checking with makeTopology on a Loop
398. Another touch of splitPeriodics
399. Try that again -- revert and get the if statement correct!
400. Try that again
401. Don't update the shape in splitPeriodics if it fails curve simplification
402. Fix scan-build warning from last commit
403. Implement EG_makeNMWireBody
404. Straighten out non-manifold WireBodies
405. Supress informational message on initial triangulation problem with Planar Faces
406. Guard against infinite loop on planar surfaces with bad initial triangulation
407. More support for tessellations without face tessellations
408. Enable EG_finishTess to fill in missing face tessellation.
409. Remove warnings generated by a new compiler
410. Config change
411. Explicitly open files as bindary in EG_saveTess/EG_loadTess.
412. Effective Topology: fix memory problem with interior Edge (in Loop twice)
413. Remove Degenerate EEdges once Faces are merged in an EFace
414. Documentation updates
415. Only consider Python 3.8 or newer in makeEnv/winEnv
416. Some config updates
417. Export Body CSystems that ar free-standing (aLen = 9)
418. Update egads_dot.h. Explicit makefile in scan-build/scan-view.
419. change startup messages in wvServer from stderr to stdout
420. Add missing DEGENERATE Edge check to EG_exportModel
421. Properly reflect the move of OCC copies in this repository
422. Fix array out-of-bounds in EG_extrude_dot
423. When splitting periodic Faces convert the order 1 BSpline to a Line; allow for calling wv_cleanupServers when there are active server threads
424. Don't fix Faces for EG_makeTopology(SOLIDBODY)
425. Fix warning
426. Makefile fixes
427. Add EG_rotate_dot and fix EG_extrude_dot to work with OCC. Fix for topological changes in EG_rotate (not enabled yet).
428. Do not use Edge tangents for vertex insertion when the magnitude is deminishing (near C0s)
429. Though premature, update the copyright year
430. Attempt to mitigate the fillTris error when presented with bad PCurves
431. Use the define OCC_VERSION_DEVELOPMENT to tell us we built the OpenCASCADE
432. Some trianglulation changes needed to deal with the GMGW3 'foreign' STEP files
433. Another config update and another update for Windows threading
434. Start FireFox in the background & try to fix stanalizer again
435. Try to fix a scan-build error that spuriously popped up!
436. Protect EMP against NULL Locks and revert Safari's startup in makeEnv
437. Windows config update and fix for EMP_LockTest for Windows
438. Fix arcLength (EGADSlite) for BSplines and update some configure scripts
439. Fix bugs in EG_arcLenSeg
440. Add MCG_ARCLEN for suggested arclen approach. Add some more quadrature options for arclen.
441. Temp brute-force fix for BSpline arcLength in EGADSlite; fix tessellation progress warning; config updates -- list XQuartz min rev
442. Fix recent update to EGADSlite arcLength code
443. Fix the flattening of periodic BSplines when exporting to EGADSlite; Fix the BSPline range in EGADSlite when flattened
444. Fix STEP writing with Name attributes
445. Mark invalid Bodies during STEP/IGES reads & limit number of inserted verts when tessellating
446. Add MSVC 2022 config file
447. C0 Blend fix so that the surface derivatives (normals) do not vanish at the C0
448. Scan-build fix from last commit
449. Functions that insert verts based on surface arc-length use underlying Face when all positions are on that Face (Effective Topology). Used in Quadding & HO tessellations.
450. Improved error message. Use brep V2 for OCC 7.6. Minor cleanup.
451. Minor cleanup
452. Fix blend tip sensitvities
453. clang analyzer fixes
454. Fix so DEBUG code compiles
455. Allow degenerate Edge in blend/ruled sections
456. Fix Blend with non-planar sections and Degerenate Edges in the Sections
457. Target arm64 darwin, not specifically macOS 11
458. Reduce testing output
459. Cleanup old config files
460. No longer support OCC less than Rev 7.0
461. Changes to support OCC 7.6
462. Update Makefiles for OCC 7.6. Improved error message.
463. Other Python config updates
464. Dynamic Web Server library cleanup
465. Fix the new wvServer dynamic library def file
466. NMakefile fix
467. Make the WV server library dynamic
468. Allow for passing a user pointer into browserMessage -- breaks compatibility!
469. minor updates
470. update udpTire.c
471. Allow for Solids with multiple Shells to work in replaceFaces
472. update udpTire.c
473. update udpTire.c for change in cacheUdp
474. Retain all Topology labeled as internal but reject external -- keep Nodes that have a non-zero valence
475. Revert Internal Node change -- needs more work!
476. An update to the last commit -- remove only Nodes that do not touch active Edges
477. Retain Internal Nodes during parsing -- THIS HAS THE POTENTAL OF BREAKING EGADS FILE READS FOR THE VERY FEW CASES THIS COMES UP (the result is that attributes are not reassigned)
478. scan-build suppression
479. Use jenkins setup for scan-build instead
480. Removed one too many
481. Another M1 fix
482. Fix last commit
483. Remove depreacted OCC defines. Fix for M1 scan-build.
484. Enable scan-build on M1
485. Fix analyzer error
486. UpRev to 1.21 and deal with Names on STEP IO
487. README updates
488. Remark on a fix to pyEGADS
489. Fix memory problem in patch tester
490. Fix last warnings
491. First cut at the Tessellation support for the new AVL; some configuration updates
492. update config/README.txt for v1.20
493. Append ESPFLIBS on M1
494. Remove OCC 6.8 from config files. Explicitly build arm64 with DARWINM1
495. Remove MSVC 2015 as approved compiler
496. Check environment variables
497. AFLR M1 config changes
498. Configure updates in support of Rev 1.20
499. Allow for server to post messages to browserMessage
500. Add missing files to clean target
501. Create possibly missing tess2d structure in EG_setTessFace
502. Document secure transport for wvServer
503. Specify static link of FORTRAN/gcc libraries
504. Fix EG_makeTopology(FACE) for Planar Surface with relaxed tolerances and fix for peridoic Edges
505. Shield debug print statment with outLevel > 1
506. Fix scan-build warning
507. Add EG_stack functions to def file
508. Add testing EG_getTopology -> EG_makeTopology with _dot tests. Test context is empty when closed with _dot tests. Test bottom-up periodic Face construction with pyEGADS. Consistent tolerance check between BrepCheck_Edge and EG_makePCurve. EG_getTopology always returns NULL geom for DEGENERATE Edge. Fix EG_isSame for DEGENERATE Edges. Fix EG_copyGeometry_dot for DEGNERATE Edge. Remove DEGNERATE Curves in EG_traverseBody. Fix EG_makePCurves for periodic Edge. Remove modifying DEGENERATE input Edge in EG_makeTopolgy. Remove arbitrary tolerance increase in EG_getArea, EG_makeTopology(FACE), and EG_getUVInfo. EG_orientWire returns Face for efficiency. Fix geom reference for EG_makeFace(LOOP). Fix duplicate Makefile target.
509. Fix for loop with single Edge
510. Remove EG_flipObject(EDGE) from EG_ruled
511. Makefile update for M1
512. Config updates and removal of Edges from EG_filpObject
513. Fix max
514. Fix tire.py
515. Update pyEGADS for new EG_makeTopology(LOOP). Remove surface sensitvity for FACE in EG_setGeometry_dot(NULL). Use InifinitePoint check for wire orientation. Fix EG_makeFace_dot.
516. cannot make TWONODE Edge if Nodes are the same; properly account for Loops senses when making Faces; fix EG_removeFaces to return error if remaining Faces are not contiguous
517. Fix Topology references when copying an EBody with different Body
518. Fix up copyObject with Tessellation Objects and EBodies also check that EBodies are closed
519. Update Windoze zlib to 1.2.11
520. Add gprof config
521. Improve IGES reader to handle units; support changes EBody references during copyObject; Update docs
522. Fix redefined warning
523. Fix flipObject for a Loop with SREVERSE edges created with makeTopology
524. Added SINNER/SOUTER defines for FACE/SHELL senses. Updated docs for fixes to getArea/makeFace/makeTopology. Minor fix in blend/rule.
525. Slightly better error message
526. EGADSlite can now tessellate an EBody
527. Expanded Model now supported by EGADSlite
528. Flip not properly marking Loops as closed
529. Improve IGES export
530. Add EG_getTessFrame to expose the information for interior Face mappings
531. Fix of AFLR4 internal Edge use of setTessFace
532. Allow for output of setTess functions
533. Allow for multiple (more than 2) Loops touching a Node in setTessFace
534. NonManifold Nodes now functional in setTessFace
535. Fix Stanalizer warning
536. Almost have NonManifold Nodes working in setTessFace
537. Fix exportLite.mak
538. move towards full Model support in EGADSlite
539. rewrite of setTessFace to support internal Edges
540. Clarify .mixed for a single face with both triangles and quads. Uprev EGADS doc.
541. Prepare EGADSlite for Effective Topology
542. Prepare EGADSlite for Effective Topology
543. Fix Stanitizer error
544. Improve Edge tessellation w/ arc length splitting
545. Uprev to 1.20
546. update config and add attribute dup on EG_copyObject for tessellations
547. update README.txt
548. README updates
549. Update README
550. Some Doc updates
551. Update PreBuilt READMEs
552. Update configure scripts and Fix seeding for inverse evaluations on toroidal surfaces
553. Try again to fix deleteObject on Model with Tess or EBody references
554. Revert last commit
555. Fix EG_deleteObject reference count for TESSELLATION & EBODY Objects in a Model
556. Update the error message in EG_imprint when EGADS fails and uses the OpenCASCADE method; also add a note in the documentation on this
557. Update the README for the next release
558. Generalize the last commit
559. Allow for getEdgeUV on single Face EFaces with Degenerate Edges, but not for multi-Face EFaces
560. Fix inverse evaluate on periodics where the Face limits are not in the periodic range
561. Fix py_to_c(takeOwnership=True)
562. Update egads doc with py_to_c(takeOwnership=False)
563. Add takeOwnership=False to py_to_c
564. Add missing WIN32 dllexport
565. UVMAP tester fix
566. Forget to change the UVMAP test code
567. Update UVMAP to the latest release
568. Remove old docs
569. Fix pyEGADS CDLL on Windows for Python >= 3.8
570. Fix warning generated when upgrading UVmap
571. Update UVmap for Effective Topology
572. Make tessellation handling more immune to bad topology
573. Properly delete scenegraph with multiple browsers
574. Fix segFault in EG_splitBody when given broken topology
575. Make sure the OCC Shape type does not change when fixing imported Bodies
576. Update EGADS API doc
577. Add undocumented EG_getTessEFace
578. Fix free on trmap in EG_destroyEBody
579. Add more tests
580. Allow EG_spline2dRaw to have fixed knot spacing
581. Only error out if the Loop's length differs
582. Fix scribe segFault; correct t value in multi segment EEdge
583. Configuration fix
584. Fix for Python 2.7 support
585. Make getEdgeUV more consistent for EFaces with a single patch
586. rename callback in wv that can get called when scene is updated
587. Improve Effective Topology performance by walking the triangulation to find position
588. Fix Stanalyzer error
589. Update Effective Topology to all tolerances; fix sceneGraph call-back in wvServer; add map lookup in wvServer
590. add wvSceneUpdated() callback after scene graph has been updated
591. Reinstate EGADS_EXTRAPOL for EFace evaluations outside of the triangulation
592. Fix incorrect reference in a DEBUG block (stanalyzer has DEBUG on)
593. Refactor how Edges are internally handled in Effective Topology
594. Forget def file in last commit
595. Provide access to an EFace's triangles -- for sensitivities
596. Allow for return from makeAttrEFaces to be NULL
597. Better Python 2 string compatability
598. Inform when an EEdge is rejected due to dihedral
599. Minor debug correction
600. Fix region checker for EEdges w/ multiple Edges in the (-) sense
601. Fix indexing problem in collecting Faces for makeAttrEFaaces
602. Fix indexing problem in collecting Faces for makeAttrEFaaces
603. Fix makeEFace with more than 2 ELoops
604. Prep for ESP beta
605. Config PYTHONPATH udpates. pyEGADS updates. doc updates for pyEGADS.
606. Fix cases where DEGENERATE Edges end up without a tessellation; copyObject can now change the Body associted with a Tessellation; vAttr will use a stored Tessellation in the model
607. Adjust the ifort library dependencies
608. Finish the implementation of all Tessellation functions that support Effective Topology
609. Minor corrections
610. Fix last commit
611. Effective Topology tesselltion corrections
612. Cleanup up some closure issues in Effective Topology
613. Additional DEGENERATE EEdge updates
614. Fix t storage for DEGENERATE EEdges
615. Fix scan-build warning from last commit
616. Allow for retaining common attributes in Effective Topology merges
617. Fix ET BoundBox calculation; Update Edge Tesselltion for EBody; Document EG_getWindingAngle
618. Effective Topology: don't use Node positions when computing Edge winding angle
619. Full Attribution & Effective Topology
620. Fix ONENODE EEdge ELLOOP construction
621. Allow for wrap-around mappings assuming a single seam
622. Minor ET cleanup
623. Can now merge EEdges to make ONENODE
624. scan-build fixes
625. stanalyzer corrections
626. Fix up wv_setKey from memory issues
627. Fix non-manifold initialization of UVs and reinstate the compute of 2nd derivatives for composites
628. Support changing outLevel and running select files
629. Don't do jlEGADS testing just yet
630. Revert ESP_venv for ESP_Beta
631. Move virtualenv into ESP directory
632. Only run minimal CAPS examples in beta
633. Install torch for beta
634. pip install torch for corsair
635. Smartsr error log parse
636. numpy suppression
637. Always build egadslite
638. Update julia path on linux
639. Remove jlEGADS from Sanitizer and Valgrind
640. mark helix3 and frustrum3 as expected successes
641. Add jlEGADS test to Sanitizer and valgrind
642. Correct path
643. Add julia testing
644. Small fix in xfoil executables
645. Higher output precision xfoil executables
646. Upgrade to AFLR 10.22.23
647. Another regsx fix
648. Fix email template
649. Ignore ifort warnings
650. Use updated wget for ESP_PreBuilt.bat
651. Beta script updates
652. Trying to limit pip install conflits. Cleaner batch pip install function.
653. Skip some long running tests with Sanitizer and Valgrind
654. Missed one more
655. More python suppressions
656. Suppress AFLR uninitialized data
657. Yet more numpy suppressions
658. Another numpy suppression
659. Upgrade to AFLR 10.22.22 on Windoze. Suppress numpy leak.
660. Upgrade to AFLR 10.22.22 on Unix systems
661. Upgrade jenkins to SU2 7.3.1
662. Look for more tessellation errors in the log file
663. Upgrade to AFLR 10.22.21
664. Add random sleep for Windoze pip install to avoid install conflicts
665. Install corsairlite dependencies for ESP_Beta testing
666. Python suppression
667. More error checking in ESPbfr.bat
668. Attempt Python 3.9.13 again
669. macM1 uses 3.8.11
670. Revert back to ESP_Python 3.8.9 for now
671. install matplotlib and scipy for corsairlite
672. install packaging for corsairlite
673. Upgade to ESP_Python-3.9.13
674. Install dill and cvxopt
675. Fix funny permissions on DARWIN64 mastros
676. Update macOS intel/M1 mastros with old macOS target
677. astros has array out-of-bound problems
678. Don't define ASTROS_ROOT on machines without astros
679. Restore mastros on macOS, macM1, and restore astros on Linux
680. Uses msys64 wget on Windoze
681. fix formatting error associated with expected errors for frustrum3 and helix3
682. fix formatting error associated with expected errors for frustrum3 and helix3
683. add frustrum3 and helix3 to expected failures
684. Windoze requires exe extension
685. Add mses to ESPbfr.tgz with tighter convergence tolerance
686. Another python suppression
687. change testing from serveCSM to serveESP
688. Third time is the charm
689. Try updating Windoze avl again...
690. Update avl exec on Linux and Windoze
691. Try that again
692. Update macOS avl executables without X11 dylib dependency
693. Remove redundant testing
694. Remove mastros.exe on macys and viggen because it does not work
695. Don't look for python deprecation warnings
696. Look for python deprecation warnings
697. Limit threading with OMP_NUM_THREADS
698. Don't pipe sanitize pyOCSM testing
699. add numpy valgrind suppression
700. Look for python unit test timing in log parse
701. Reduce CAPS ESP_Commit testing
702. scipy is now available on Monterey
703. Look for planar meshing errors
704. Update avl and DAWIN64/mastros.exe executables
705. astros.exe does not work on Monterey
706. Upgrade macOS santizer library path
707. Remove libquadmath dependency on DARWIN64
708. Correct avl version number to 3.40
709. Reduce avl NVMAX for DARWINM1
710. Upgrade to avl 3.41
711. Upgrade to MYSTRAN 13.3A on Windoze
712. Upgrade to Mystran 13.3a
713. Another python suppression
714. Update jenkins to run skeletonAIM example
715. Upgrade to SU2-v7.3.0 for Jenkins
716. Update error messages
717. Upgrade to PointwiseV18.5R1 on macOS
718. Another python suppression
719. Don't build CAPS for OpenCSM with lint
720. Upgrade to Pointwise V18.5R1 on reynolds. Compile serveESP for stanalizer
721. Build serveESP
722. Add csmOCCFailure_7.6.txt file
723. Remove csmOCCFailure_7.6.txt directory
724. Should have kept last numpy suppression
725. Another try at suppressing numpy leaks
726. Suppress numpy leak
727. mark closeBody2 as expected success
728. Update sens parsers
729. Jenkins updates for 7.6.0
730. update verification data for 7.6.0
731. Add Warning: LockRelease to jenkins parser
732. Don't set UDUNITS for beta testing
733. Remove last alias
734. Alias python3 on centOS8
735. Update mses path
736. Add PATHs to MSES executables
737. Upgrade Jenkins env for MSVC 2022
738. Update CASROOT
739. Add 7.6 files (needs updates)
740. Enable awave again for viggen
741. mark closeBody2 as failure on 7.3.1
742. changes to accomodate better sensitivities associated with tip treatment in BLENDs
743. Dissable astros and awave on viggen
744. Use bash on Windoze as well
745. Suppress output from test_pyOCSM to reduce email generation time.
746. Update python suppression
747. add debug.csm as known failure
748. Update how ESP_Python is found
749. source .bashrc as part of env
750. Fix scipy install on viggen
751. Another Cart3D suppression
752. Typo
753. Use anaconda scipy on M1 for now
754. Don't use system site packages for virtualenv
755. Don't use system site packages for virtualenv
756. Suppress perl memory leaks
757. Remove cart perl command
758. Missed CART3D_ARCH
759. Update env for Cart3D design
760. Change back the getdelim suppression
761. Fix bug in Valgrind script not running CAPS unit test
762. Try again to suppress libc problem
763. Adjust sanitizer suppression
764. Upgrade macOS clang 13.0.0
765. remove testing of plugs7a and plugs8a
766. Another Windoze fix
767. Turn on echo again for Windoze
768. Fix typo
769. Add M1 to PreBuilt testing
770. Upgrade to SU2 7.2.0
771. Fix for memcheck python script on darwin
772. scipy and curses suppressions
773. Use system site-packages
774. Add openmdao to pip installs
775. Globaly have minimal CAPS output for Jenkins
776. Upgrade pointwise on macys
777. Generalize valgrind suppression
778. Another python suppression
779. remove plugs6a from testing
780. Add keep-debuginfo=yes to valgrind flags
781. Another attempt at suppression Pointwise memory problems
782. Always suppress alloc dealloc missmatch
783. Undo mystran exclusion from valgrind
784. Suppress Pointwise alloc dealloc missmatch
785. Exclude mystran from valgrind due to false positives
786. Upgrade Pointwise on Reynolds
787. Undo last change
788. Fix virtualenv on macOS
789. Don't install matplotlib for testing
790. Upgrade valgrind version
791. Dissable undefined sanitizer vptr option
792. mark plugs4c as successful
793. Update mastros rpath on viggen
794. Update ESPFLIBS for ubsan
795. Another viggen update
796. Enable viggen Memcheck and Undefined
797. Switch back to bash on viggen
798. Update ESPbft.tgz
799. Remove anaconda from Windoze Env
800. Correct python version on viggen
801. Fix for viggen
802. Upgrade to AFLR 10.17.5. Add DARWINM1 testing.
803. One more try at Windoze
804. Fix virtualenv on Windoze
805. Also upgrade pip
806. Try pip install multiple times
807. Upgrade gcc version for sansLIP
808. Suppress bash memory leak
809. Suppress leak in sed
810. Upgrade to libasan.so.6
811. Use gcc-11 for sanitizer
812. fwrite valgrind suppression
813. Fix typo
814. Add valgrind to slugs testing
815. One more memcheck fix
816. Fix for MemcheckCaps
817. Slugs fixes for sanitizer and valgrind
818. Slashes...
819. One more Windoze try
820. Another Windoze Slugs script fix
821. Windoze Slugs fix
822. Slugs script updates
823. Add Slugs testing scripts
824. Only run plugs*.csm files for plugs
825. Only run plugs*.csm files for plugs testing.
826. plugs1c is not longer expected failure
827. Remove verbosity
828. Finally fixed
829. Getting closer
830. what is going on...
831. One more Plugs fix
832. Update expectPLUGS script
833. Windoze slashes
834. Test plugs0 which is actually expected to pass
835. Add numpy to venv for SU2
836. Plugs, not plugs
837. Fix beta scripts
838. mark plugs1c as expected failure (for now)
839. Catch tire errors on Windoze
840. Update asan lib path
841. Ignore pip timeout warning
842. Of coarse, three slashes...
843. Escape slashes on Windoze
844. One more try at autoStart on windoze
845. Update autoStart testing for Sanitizer and Valgrind
846. Fix path for Windoze autoStart
847. Fix autoStart testing
848. Another valgrind supprsssion. Windoze fix
849. Add autoStart testing for Sanitizer and Valgrind
850. Add autoStart testing. Another OCC valgrind fix.
851. Fix last commit
852. Valgrind suppression fixes
853. matplotlib valgrind suppressions
854. Sanitizer suppressions
855. Don't update Jenkins files in bfr
856. Add Jenkins ESP_parse and ESP_email.template config files. Remove OCC 6.8 files.
857. note that rocketnozzle1 and rocketnozzle2 are expected to fail
858. Update ESP_Beta testing. Add ESP_PreBuilt testing.
859. Update to AFLR 10.15.6
860. SU2 path fix on macOS
861. Correct SU2 path
862. Upgrade to SU2 Blackbird
863. Update to AFLR 10.15.3
864. Remove centOS68 if statements
865. Remove 6.8 files, add legacy directory
866. add imprint5 to list of expected failures
867. Upgrade to AFLR 10.15.1
868. change the name of configuration sensitivities to geometric sensitivities
869. Add pyOCSM to PYTHONPATH
870. Update path to test_pyOCSM.py
871. One more valgrind suppression
872. Put back one suppression
873. Suppress numpy memory leaks
874. Fix setting memcheck and valgrind python
875. Suppress python memory leak
876. Suppress numpy memory leaks
877. Add scan-build links
878. Single PYTHON_VERSION for all Jenkins scipts
879. Use python 3.8.9
880. Add --embed to python-config when appropriate
881. Upgrade Python to 3.9.4
882. Python 2.6.6 is really dead
883. Don't try to use Python 2.6
884. Fix script
885. Run legacy pyCAPS tests
886. Remove 2018 template_avl
887. Enable python fault handler
888. Don't try to compile IRIT when it does not exist
889. Don't use Python 2.6 on CentOS 6.8
890. Don't run pointwise on commit
891. Don't run on Python 2.6
892. Script fixes for rnning CAPS unit tests
893. Minor beta fix
894. One more path fix
895. Path fix for Beta
896. Update jenkins scripts for new pyCAPS
897. Run pyCAPS unit tests with Sanitizer
898. Fix PYTHONPATH
899. Use new ctypes pyCAPS
900. Upgrade ifort on Windoze
901. Another Intel fix
902. Missed sone intel updates
903. Update intel compiler
904. Remove scan-build directories if clean
905. Remove CPATH for stanalizer