Skipping 671 KB..
Full Log==> serveESP completed successfully
real 0m0.324s
user 0m0.452s
sys 0m0.011s
+++ set +x
damaged_2 passed (as expected)
--------------------------------------------------------------------------------------------------
( 9 )
+++ /Users/jenkins/workspace/ESP_UndefinedCaps/7.4/OpenCSM/data/Slugs/DARWINM1/ESP/DARWINM1/bin/Slugs ../../OpenCSM/trunk/data/Slugs/demo1_0 -outLevel 0 -batch -jrnl ../../OpenCSM/trunk/data/Slugs/demo1_0.mod.jrnl
..
After reading: npnt = 5177
ntri = 10350
==> Opening input journal file "../../OpenCSM/trunk/data/Slugs/demo1_0.mod.jrnl"
starting dijkstra passes . done
0 dxyzmax= 3.57521e-02 ( 9,1) 1.3921 0.8346 -0.0875
100 dxyzmax= 6.86792e-04 ( 9,1) 1.3978 0.9318 -0.0289
200 dxyzmax= 2.55803e-04 ( 9,1) 1.3984 0.9750 -0.0158
300 dxyzmax= 8.83313e-05 ( 9,1) 1.3984 0.9905 -0.0125
400 dxyzmax= 2.91574e-05 ( 8,1) 1.3939 0.9959 0.0640
500 dxyzmax= 1.00915e-05 ( 9,1) 1.3983 0.9977 -0.0120
600 dxyzmax= 3.56681e-06 ( 9,1) 1.3983 0.9984 -0.0120
700 dxyzmax= 3.39124e-06 ( 8,1) 1.3939 0.9988 0.0645
800 dxyzmax= 1.16688e-06 ( 9,1) 1.3983 0.9990 -0.0117
900 dxyzmax= 4.11511e-07 ( 9,1) 1.3983 0.9990 -0.0117
1000 dxyzmax= 1.45409e-07 ( 9,1) 1.3983 0.9991 -0.0117
converged
1042 dxyzmax= 9.39622e-08 ( 9,1) 1.3983 0.9991 -0.0117
starting dijkstra passes . done
starting dijkstra passes . done
0 dxyzmax= 2.90190e-02 ( 7,1) 0.9927 1.8143 -0.4911
100 dxyzmax= 1.52414e-05 ( 4,1) 0.9985 1.4997 -0.4898
converged
194 dxyzmax= 1.26140e-07 ( 4,1) 0.9986 1.5000 -0.4897
starting dijkstra passes . done
starting dijkstra passes . done
0 dxyzmax= 1.51804e-02 ( 7,0) 1.0167 1.8559 0.4849
100 dxyzmax= 3.13982e-06 ( 4,1) 0.9987 1.5002 0.4900
converged
163 dxyzmax= 1.26187e-07 ( 4,1) 0.9987 1.5002 0.4900
starting dijkstra passes . done
starting dijkstra passes . done
starting dijkstra passes . done
starting dijkstra passes . done
starting dijkstra passes . done
Face 1
...at beginning
Edge 1, npnt= 33, ibeg= 1, iend= 2
Edge 2, npnt= 33, ibeg= 3, iend= 4
Edge 3, npnt= 33, ibeg= 4, iend= 1
Edge 4, npnt= 33, ibeg= 2, iend= 3
...after sorting into Loops
Loop 0 (0:3)
Edge 1, npnt= 33, ibeg= 1, iend= 2
Edge 4, npnt= 33, ibeg= 2, iend= 3
Edge 2, npnt= 33, ibeg= 3, iend= 4
Edge 3, npnt= 33, ibeg= 4, iend= 1
Face 2
...at beginning
Edge 5, npnt= 9, ibeg= 5, iend= 6
Edge 6, npnt= 9, ibeg= 7, iend= 8
Edge 7, npnt= 25, ibeg= 9, iend= 5
Edge 8, npnt= 25, ibeg= 8, iend= 10
Edge 9, npnt= 17, ibeg= 11, iend= 12
Edge 10, npnt= 17, ibeg= 13, iend= 14
Edge 11, npnt= 17, ibeg= 6, iend= 13
Edge 12, npnt= 17, ibeg= 14, iend= 7
Edge 13, npnt= 7, ibeg= 10, iend= 11
Edge 14, npnt= 39, ibeg= 12, iend= 9
...after sorting into Loops
Loop 0 (0:9)
Edge 5, npnt= 9, ibeg= 5, iend= 6
Edge 11, npnt= 17, ibeg= 6, iend= 13
Edge 10, npnt= 17, ibeg= 13, iend= 14
Edge 12, npnt= 17, ibeg= 14, iend= 7
Edge 6, npnt= 9, ibeg= 7, iend= 8
Edge 8, npnt= 25, ibeg= 8, iend= 10
Edge 13, npnt= 7, ibeg= 10, iend= 11
Edge 9, npnt= 17, ibeg= 11, iend= 12
Edge 14, npnt= 39, ibeg= 12, iend= 9
Edge 7, npnt= 25, ibeg= 9, iend= 5
Face 3
...at beginning
Edge -1, npnt= 33, iend= 2, ibeg= 1
Edge 15, npnt= 33, ibeg= 1, iend= 15
Edge 16, npnt= 33, ibeg= 16, iend= 2
Edge 17, npnt= 33, ibeg= 15, iend= 16
...after sorting into Loops
Loop 0 (0:3)
Edge -1, npnt= 33, iend= 2, ibeg= 1
Edge 15, npnt= 33, ibeg= 1, iend= 15
Edge 17, npnt= 33, ibeg= 15, iend= 16
Edge 16, npnt= 33, ibeg= 16, iend= 2
Face 4
...at beginning
Edge -2, npnt= 33, iend= 4, ibeg= 3
Edge -5, npnt= 9, iend= 6, ibeg= 5
Edge -6, npnt= 9, iend= 8, ibeg= 7
Edge 18, npnt= 33, ibeg= 5, iend= 4
Edge 19, npnt= 33, ibeg= 3, iend= 8
Edge 20, npnt= 20, ibeg= 7, iend= 6
...after sorting into Loops
Loop 0 (0:5)
Edge -2, npnt= 33, iend= 4, ibeg= 3
Edge 19, npnt= 33, ibeg= 3, iend= 8
Edge -6, npnt= 9, iend= 8, ibeg= 7
Edge 20, npnt= 20, ibeg= 7, iend= 6
Edge -5, npnt= 9, iend= 6, ibeg= 5
Edge 18, npnt= 33, ibeg= 5, iend= 4
Face 5
...at beginning
Edge -3, npnt= 33, iend= 1, ibeg= 4
Edge -7, npnt= 25, iend= 5, ibeg= 9
Edge -15, npnt= 33, iend= 15, ibeg= 1
Edge -18, npnt= 33, iend= 4, ibeg= 5
Edge 21, npnt= 9, ibeg= 9, iend= 15
...after sorting into Loops
Loop 0 (0:4)
Edge -3, npnt= 33, iend= 1, ibeg= 4
Edge -18, npnt= 33, iend= 4, ibeg= 5
Edge -7, npnt= 25, iend= 5, ibeg= 9
Edge 21, npnt= 9, ibeg= 9, iend= 15
Edge -15, npnt= 33, iend= 15, ibeg= 1
Face 6
...at beginning
Edge -4, npnt= 33, iend= 3, ibeg= 2
Edge -8, npnt= 25, iend= 10, ibeg= 8
Edge -16, npnt= 33, iend= 2, ibeg= 16
Edge -19, npnt= 33, iend= 8, ibeg= 3
Edge 22, npnt= 9, ibeg= 16, iend= 10
...after sorting into Loops
Loop 0 (0:4)
Edge -4, npnt= 33, iend= 3, ibeg= 2
Edge -16, npnt= 33, iend= 2, ibeg= 16
Edge 22, npnt= 9, ibeg= 16, iend= 10
Edge -8, npnt= 25, iend= 10, ibeg= 8
Edge -19, npnt= 33, iend= 8, ibeg= 3
Face 7
...at beginning
Edge 23, npnt= 17, ibeg= 17, iend= 18
Edge 24, npnt= 17, ibeg= 18, iend= 17
...after sorting into Loops
Loop 0 (0:1)
Edge 23, npnt= 17, ibeg= 17, iend= 18
Edge 24, npnt= 17, ibeg= 18, iend= 17
Face 8
...at beginning
Edge -9, npnt= 17, iend= 12, ibeg= 11
Edge -23, npnt= 17, iend= 18, ibeg= 17
Edge 25, npnt= 9, ibeg= 11, iend= 18
Edge 26, npnt= 9, ibeg= 17, iend= 12
...after sorting into Loops
Loop 0 (0:3)
Edge -9, npnt= 17, iend= 12, ibeg= 11
Edge 25, npnt= 9, ibeg= 11, iend= 18
Edge -23, npnt= 17, iend= 18, ibeg= 17
Edge 26, npnt= 9, ibeg= 17, iend= 12
Face 9
...at beginning
Edge -10, npnt= 17, iend= 14, ibeg= 13
Edge 27, npnt= 17, ibeg= 13, iend= 14
...after sorting into Loops
Loop 0 (0:1)
Edge -10, npnt= 17, iend= 14, ibeg= 13
Edge 27, npnt= 17, ibeg= 13, iend= 14
Face 10
...at beginning
Edge -11, npnt= 17, iend= 13, ibeg= 6
Edge -12, npnt= 17, iend= 7, ibeg= 14
Edge -27, npnt= 17, iend= 14, ibeg= 13
Edge 28, npnt= 38, ibeg= 6, iend= 7
...after sorting into Loops
Loop 0 (0:3)
Edge -11, npnt= 17, iend= 13, ibeg= 6
Edge 28, npnt= 38, ibeg= 6, iend= 7
Edge -12, npnt= 17, iend= 7, ibeg= 14
Edge -27, npnt= 17, iend= 14, ibeg= 13
Face 11
...at beginning
Edge 29, npnt= 19, ibeg= 19, iend= 20
Edge 30, npnt= 15, ibeg= 20, iend= 19
...after sorting into Loops
Loop 0 (0:1)
Edge 29, npnt= 19, ibeg= 19, iend= 20
Edge 30, npnt= 15, ibeg= 20, iend= 19
Face 12
...at beginning
Edge -20, npnt= 20, iend= 6, ibeg= 7
Edge -29, npnt= 19, iend= 20, ibeg= 19
Edge 31, npnt= 14, ibeg= 19, iend= 6
Edge 32, npnt= 13, ibeg= 7, iend= 20
...after sorting into Loops
Loop 0 (0:3)
Edge -20, npnt= 20, iend= 6, ibeg= 7
Edge 32, npnt= 13, ibeg= 7, iend= 20
Edge -29, npnt= 19, iend= 20, ibeg= 19
Edge 31, npnt= 14, ibeg= 19, iend= 6
Face 13
...at beginning
Edge -28, npnt= 38, iend= 7, ibeg= 6
Edge -30, npnt= 15, iend= 19, ibeg= 20
Edge -31, npnt= 14, iend= 6, ibeg= 19
Edge -32, npnt= 13, iend= 20, ibeg= 7
...after sorting into Loops
Loop 0 (0:3)
Edge -28, npnt= 38, iend= 7, ibeg= 6
Edge -31, npnt= 14, iend= 6, ibeg= 19
Edge -30, npnt= 15, iend= 19, ibeg= 20
Edge -32, npnt= 13, iend= 20, ibeg= 7
Face 14
...at beginning
Edge -24, npnt= 17, iend= 17, ibeg= 18
Edge -25, npnt= 9, iend= 18, ibeg= 11
Edge -26, npnt= 9, iend= 12, ibeg= 17
Edge 33, npnt= 17, ibeg= 11, iend= 12
...after sorting into Loops
Loop 0 (0:3)
Edge -24, npnt= 17, iend= 17, ibeg= 18
Edge -25, npnt= 9, iend= 18, ibeg= 11
Edge 33, npnt= 17, ibeg= 11, iend= 12
Edge -26, npnt= 9, iend= 12, ibeg= 17
Face 15
...at beginning
Edge -13, npnt= 7, iend= 11, ibeg= 10
Edge -14, npnt= 39, iend= 9, ibeg= 12
Edge -17, npnt= 33, iend= 16, ibeg= 15
Edge -21, npnt= 9, iend= 15, ibeg= 9
Edge -22, npnt= 9, iend= 10, ibeg= 16
Edge -33, npnt= 17, iend= 12, ibeg= 11
...after sorting into Loops
Loop 0 (0:5)
Edge -13, npnt= 7, iend= 11, ibeg= 10
Edge -22, npnt= 9, iend= 10, ibeg= 16
Edge -17, npnt= 33, iend= 16, ibeg= 15
Edge -21, npnt= 9, iend= 15, ibeg= 9
Edge -14, npnt= 39, iend= 9, ibeg= 12
Edge -33, npnt= 17, iend= 12, ibeg= 11
fit1dCloud(npnt=33, ncp=9) -> status=0, numiter= 9, normf= 4.1129e-07, dotmin= nan, nmin=4
fit1dCloud(npnt=33, ncp=9) -> status=0, numiter= 9, normf= 4.1129e-07, dotmin= nan, nmin=4
fit1dCloud(npnt=33, ncp=9) -> status=0, numiter= 9, normf= 4.1129e-07, dotmin= nan, nmin=4
fit1dCloud(npnt=33, ncp=9) -> status=0, numiter= 9, normf= 4.1129e-07, dotmin= nan, nmin=4
fit1dCloud(npnt=9, ncp=9) -> status=0, numiter= 8, normf= 1.9760e-08, dotmin= nan, nmin=1
fit1dCloud(npnt=9, ncp=9) -> status=0, numiter= 8, normf= 1.9760e-08, dotmin= nan, nmin=1
fit1dCloud(npnt=25, ncp=9) -> status=0, numiter= 9, normf= 1.4961e-07, dotmin= nan, nmin=3
fit1dCloud(npnt=25, ncp=9) -> status=0, numiter= 9, normf= 1.4961e-07, dotmin= nan, nmin=3
fit1dCloud(npnt=17, ncp=9) -> status=0, numiter=822, normf= 1.2924e-04, dotmin= 0.8719, nmin=2
fit1dCloud(npnt=17, ncp=9) -> status=0, numiter= 8, normf= 1.7149e-07, dotmin= nan, nmin=2
fit1dCloud(npnt=17, ncp=9) -> status=0, numiter= 8, normf= 1.7503e-07, dotmin= nan, nmin=2
fit1dCloud(npnt=17, ncp=9) -> status=0, numiter= 8, normf= 1.7503e-07, dotmin= nan, nmin=2
fit1dCloud(npnt=7, ncp=9) -> status=0, numiter= 8, normf= 3.2021e-08, dotmin= nan, nmin=0
fit1dCloud(npnt=39, ncp=9) -> status=0, numiter= 10, normf= 5.3914e-07, dotmin= nan, nmin=4
fit1dCloud(npnt=33, ncp=9) -> status=0, numiter= 9, normf= 4.1129e-07, dotmin= nan, nmin=4
fit1dCloud(npnt=33, ncp=9) -> status=0, numiter= 9, normf= 4.1129e-07, dotmin= nan, nmin=4
fit1dCloud(npnt=33, ncp=9) -> status=0, numiter= 9, normf= 4.1129e-07, dotmin= nan, nmin=4
fit1dCloud(npnt=33, ncp=9) -> status=0, numiter= 9, normf= 4.1129e-07, dotmin= nan, nmin=4
fit1dCloud(npnt=33, ncp=9) -> status=0, numiter= 9, normf= 4.1129e-07, dotmin= nan, nmin=4
fit1dCloud(npnt=20, ncp=9) -> status=0, numiter=772, normf= 3.1408e-04, dotmin= 0.8395, nmin=2
fit1dCloud(npnt=9, ncp=9) -> status=0, numiter= 8, normf= 1.9368e-08, dotmin= nan, nmin=1
fit1dCloud(npnt=9, ncp=9) -> status=0, numiter= 8, normf= 1.9368e-08, dotmin= nan, nmin=1
fit1dCloud(npnt=17, ncp=9) -> status=0, numiter=822, normf= 1.2924e-04, dotmin= 0.8719, nmin=2
fit1dCloud(npnt=17, ncp=9) -> status=0, numiter=822, normf= 1.2924e-04, dotmin= 0.8719, nmin=2
fit1dCloud(npnt=9, ncp=9) -> status=0, numiter= 8, normf= 1.9368e-08, dotmin= nan, nmin=1
fit1dCloud(npnt=9, ncp=9) -> status=0, numiter= 8, normf= 1.9368e-08, dotmin= nan, nmin=1
fit1dCloud(npnt=17, ncp=9) -> status=0, numiter=685, normf= 2.4146e-04, dotmin= 0.8973, nmin=2
fit1dCloud(npnt=38, ncp=9) -> status=0, numiter=445, normf= 4.4933e-04, dotmin= 0.8903, nmin=2
fit1dCloud(npnt=19, ncp=9) -> status=0, numiter=1000, normf= 2.6635e-04, dotmin= 0.8457, nmin=2
fit1dCloud(npnt=15, ncp=9) -> status=0, numiter=635, normf= 2.5955e-04, dotmin= 0.8930, nmin=1
fit1dCloud(npnt=14, ncp=9) -> status=0, numiter= 8, normf= 1.3518e-04, dotmin= 1.0000, nmin=1
fit1dCloud(npnt=13, ncp=9) -> status=0, numiter=659, normf= 3.7523e-04, dotmin= 0.8776, nmin=1
fit1dCloud(npnt=17, ncp=9) -> status=0, numiter=822, normf= 1.2924e-04, dotmin= 0.8719, nmin=2
generateFits(1D), CPU= 0.89 sec
iface= 1 npnt= 888
nfit= 888 (100%)
iface= 2 npnt= 537
nfit= 537 (100%)
iface= 3 npnt= 901
nfit= 901 (100%)
iface= 4 npnt= 624
nfit= 624 (100%)
iface= 5 npnt= 901
nfit= 901 (100%)
iface= 6 npnt= 890
nfit= 890 (100%)
iface= 7 npnt= 85
nfit= 85 (100%)
iface= 8 npnt= 69
nfit= 40 ( 57%)
non-planar (fitting) ipnt=1, prod= -0.04877
extracting south control points from iedge= -9
extracting east control points from iedge= 25
extracting north control points from iedge= -23
extracting west control points from iedge= 26
iface= 9 npnt= 62
nfit= 62 (100%)
iface= 10 npnt= 207
nfit= 132 ( 63%)
non-planar (fitting) ipnt=1, prod= 0.00647
extracting south control points from iedge= -11
extracting east control points from iedge= 28
extracting north control points from iedge= -12
extracting west control points from iedge= -27
iface= 11 npnt= 85
nfit= 85 (100%)
iface= 12 npnt= 200
nfit= 123 ( 61%)
non-planar (fitting) ipnt=1, prod= -0.04011
extracting south control points from iedge= -20
extracting east control points from iedge= 32
extracting north control points from iedge= -29
extracting west control points from iedge= 31
iface= 13 npnt= 154
nfit= 93 ( 60%)
non-planar (fitting) ipnt=1, prod= 0.03871
extracting south control points from iedge= -28
extracting east control points from iedge= -31
extracting north control points from iedge= -30
extracting west control points from iedge= -32
iface= 14 npnt= 69
nfit= 40 ( 57%)
non-planar (fitting) ipnt=1, prod= -0.04877
extracting south control points from iedge= -24
extracting east control points from iedge= -25
extracting north control points from iedge= 33
extracting west control points from iedge= -26
iface= 15 npnt= 291
nfit= 291 (100%)
ID 1f939ba80: is master
ID 1f939ba80: iface 3 has 901 fitting Points
ID 1f939ba80: iface 3 skipped
ID 1f939ba80: iface 5 has 901 fitting Points
ID 1f939ba80: iface 5 skipped
ID 1f939ba80: iface 6 has 890 fitting Points
ID 1f939ba80: iface 6 skipped
ID 1f939ba80: iface 1 has 888 fitting Points
ID 1f939ba80: iface 1 skipped
ID 1f939ba80: iface 4 has 624 fitting Points
ID 1f939ba80: iface 4 skipped
ID 1f939ba80: iface 2 has 537 fitting Points
ID 1f939ba80: iface 2 skipped
ID 1f939ba80: iface 15 has 291 fitting Points
ID 1f939ba80: iface 15 skipped
ID 1f939ba80: iface 10 has 132 fitting Points
ID 16d4f7000: start thread
ID 16d4f7000: iface 12 has 123 fitting Points
ID 1f939ba80: iface 10 complete with status=0, numiter= 11, normf= 3.0079e-04, dotmin= 0.8893, nmin= 0, npierce= 0
ID 1f939ba80: iface 13 has 93 fitting Points
ID 1f939ba80: iface 13 complete with status=0, numiter=100, normf= 3.7333e-04, dotmin= 0.8895, nmin= 0, npierce= 0
ID 1f939ba80: iface 7 has 85 fitting Points
ID 1f939ba80: iface 7 skipped
ID 1f939ba80: iface 11 has 85 fitting Points
ID 1f939ba80: iface 11 skipped
ID 1f939ba80: iface 9 has 62 fitting Points
ID 1f939ba80: iface 9 skipped
ID 1f939ba80: iface 8 has 40 fitting Points
ID 16d4f7000: iface 12 complete with status=0, numiter=100, normf= 3.9755e-04, dotmin= 0.8286, nmin= 0, npierce= 0
ID 16d4f7000: iface 14 has 40 fitting Points
ID 1f939ba80: iface 8 complete with status=0, numiter= 10, normf= 8.4415e-05, dotmin= 0.8696, nmin= 0, npierce= 0
ID 16d4f7000: iface 14 complete with status=0, numiter= 10, normf= 8.4415e-05, dotmin= nan, nmin= 0, npierce= 0
ID 16d4f7000: stop thread
generateFits(2D), CPU= 10.75 sec
inode= 1, nedg= 3, xyz= -1.00000 -1.00000 -1.00000
inode= 2, nedg= 3, xyz= -1.00000 -1.00000 1.00000
inode= 3, nedg= 3, xyz= -1.00000 1.00000 1.00000
inode= 4, nedg= 3, xyz= -1.00000 1.00000 -1.00000
inode= 5, nedg= 3, xyz= 1.00000 1.00000 -1.00000
inode= 6, nedg= 5, xyz= 1.00000 1.00000 -0.48990
inode= 7, nedg= 5, xyz= 1.00000 1.00000 0.48990
inode= 8, nedg= 3, xyz= 1.00000 1.00000 1.00000
inode= 9, nedg= 3, xyz= 1.00000 -0.50000 -1.00000
inode= 10, nedg= 3, xyz= 1.00000 -0.50000 1.00000
inode= 11, nedg= 4, xyz= 1.00000 -0.50000 0.75000
inode= 12, nedg= 4, xyz= 1.00000 -0.50000 0.25000
inode= 13, nedg= 3, xyz= 1.00000 0.00000 -0.48990
inode= 14, nedg= 3, xyz= 1.00000 0.00000 0.48990
inode= 15, nedg= 3, xyz= 1.00000 -1.00000 -1.00000
inode= 16, nedg= 3, xyz= 1.00000 -1.00000 1.00000
inode= 17, nedg= 3, xyz= 0.50000 -0.50000 0.25000
inode= 18, nedg= 3, xyz= 0.50000 -0.50000 0.75000
inode= 19, nedg= 3, xyz= 0.99755 2.00000 -0.49039
inode= 20, nedg= 3, xyz= 0.99755 2.00000 0.49039
iedge= 1, ibeg= 1, iend= 2, ileft= 1, irite= 3
iedge= 2, ibeg= 3, iend= 4, ileft= 1, irite= 4
iedge= 3, ibeg= 4, iend= 1, ileft= 1, irite= 5
iedge= 4, ibeg= 2, iend= 3, ileft= 1, irite= 6
iedge= 5, ibeg= 5, iend= 6, ileft= 2, irite= 4
iedge= 6, ibeg= 7, iend= 8, ileft= 2, irite= 4
iedge= 7, ibeg= 9, iend= 5, ileft= 2, irite= 5
iedge= 8, ibeg= 8, iend= 10, ileft= 2, irite= 6
iedge= 9, ibeg= 11, iend= 12, ileft= 2, irite= 8
iedge= 10, ibeg= 13, iend= 14, ileft= 2, irite= 9
iedge= 11, ibeg= 6, iend= 13, ileft= 2, irite= 10
iedge= 12, ibeg= 14, iend= 7, ileft= 2, irite= 10
iedge= 13, ibeg= 10, iend= 11, ileft= 2, irite= 15
iedge= 14, ibeg= 12, iend= 9, ileft= 2, irite= 15
iedge= 15, ibeg= 1, iend= 15, ileft= 3, irite= 5
iedge= 16, ibeg= 16, iend= 2, ileft= 3, irite= 6
iedge= 17, ibeg= 15, iend= 16, ileft= 3, irite= 15
iedge= 18, ibeg= 5, iend= 4, ileft= 4, irite= 5
iedge= 19, ibeg= 3, iend= 8, ileft= 4, irite= 6
iedge= 20, ibeg= 7, iend= 6, ileft= 4, irite= 12
iedge= 21, ibeg= 9, iend= 15, ileft= 5, irite= 15
iedge= 22, ibeg= 16, iend= 10, ileft= 6, irite= 15
iedge= 23, ibeg= 17, iend= 18, ileft= 7, irite= 8
iedge= 24, ibeg= 18, iend= 17, ileft= 7, irite= 14
iedge= 25, ibeg= 11, iend= 18, ileft= 8, irite= 14
iedge= 26, ibeg= 17, iend= 12, ileft= 8, irite= 14
iedge= 27, ibeg= 13, iend= 14, ileft= 9, irite= 10
iedge= 28, ibeg= 6, iend= 7, ileft= 10, irite= 13
iedge= 29, ibeg= 19, iend= 20, ileft= 11, irite= 12
iedge= 30, ibeg= 20, iend= 19, ileft= 11, irite= 13
iedge= 31, ibeg= 19, iend= 6, ileft= 12, irite= 13
iedge= 32, ibeg= 7, iend= 20, ileft= 12, irite= 13
iedge= 33, ibeg= 11, iend= 12, ileft= 14, irite= 15
iface= 1, icol= 1, nedg= 4, nlup= 1
edg= 1 4 2 3
lup= 0
iface= 2, icol= 2, nedg= 10, nlup= 1
edg= 5 11 10 12 6 8 13 9 14 7
lup= 0
iface= 3, icol= 3, nedg= 4, nlup= 1
edg= -1 15 17 16
lup= 0
iface= 4, icol= 4, nedg= 6, nlup= 1
edg= -2 19 -6 20 -5 18
lup= 0
iface= 5, icol= 5, nedg= 5, nlup= 1
edg= -3 -18 -7 21 -15
lup= 0
iface= 6, icol= 6, nedg= 5, nlup= 1
edg= -4 -16 22 -8 -19
lup= 0
iface= 7, icol= 7, nedg= 2, nlup= 1
edg= 23 24
lup= 0
iface= 8, icol= 8, nedg= 4, nlup= 1
edg= -9 25 -23 26
lup= 0
iface= 9, icol= 9, nedg= 2, nlup= 1
edg= -10 27
lup= 0
iface= 10, icol= 10, nedg= 4, nlup= 1
edg= -11 28 -12 -27
lup= 0
iface= 11, icol= 11, nedg= 2, nlup= 1
edg= 29 30
lup= 0
iface= 12, icol= 12, nedg= 4, nlup= 1
edg= -20 32 -29 31
lup= 0
iface= 13, icol= 13, nedg= 4, nlup= 1
edg= -28 -31 -30 -32
lup= 0
iface= 14, icol= 14, nedg= 4, nlup= 1
edg= -24 -25 33 -26
lup= 0
iface= 15, icol= 15, nedg= 6, nlup= 1
edg= -13 -22 -17 -21 -14 -33
lup= 0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
planar
iface= 1 is planar, so accuracy is not computed
planar
iface= 2 is planar, so accuracy is not computed
planar
iface= 3 is planar, so accuracy is not computed
planar
iface= 4 is planar, so accuracy is not computed
planar
iface= 5 is planar, so accuracy is not computed
planar
iface= 6 is planar, so accuracy is not computed
planar
iface= 7 is planar, so accuracy is not computed
non-planar
iface=8, nedg=4, nlup=1
EG_makeGeometry(SURFACE) -> status=0
EG_makeGeometry(PCURVE 0) -> status=0
EG_makeGeometry(PCURVE 1) -> status=0
EG_makeGeometry(PCURVE 2) -> status=0
EG_makeGeometry(PCURVE 3) -> status=0
EG_makeTopology(LOOP) -> status=0
EG_makeTopology(FACE) -> status=0
iface= 8 nfit= 40 rms= 2.140e-04
npnt= 69 rms= 2.715e-04
planar
iface= 9 is planar, so accuracy is not computed
non-planar
iface=10, nedg=4, nlup=1
EG_makeGeometry(SURFACE) -> status=0
EG_makeGeometry(PCURVE 0) -> status=0
EG_makeGeometry(PCURVE 1) -> status=0
EG_makeGeometry(PCURVE 2) -> status=0
EG_makeGeometry(PCURVE 3) -> status=0
EG_makeTopology(LOOP) -> status=0
EG_makeTopology(FACE) -> status=0
iface= 10 nfit= 132 rms= 5.927e-04
npnt= 207 rms= 6.183e-04
planar
iface= 11 is planar, so accuracy is not computed
non-planar
iface=12, nedg=4, nlup=1
EG_makeGeometry(SURFACE) -> status=0
EG_makeGeometry(PCURVE 0) -> status=0
EG_makeGeometry(PCURVE 1) -> status=0
EG_makeGeometry(PCURVE 2) -> status=0
EG_makeGeometry(PCURVE 3) -> status=0
EG_makeTopology(LOOP) -> status=0
EG_makeTopology(FACE) -> status=0
iface= 12 nfit= 123 rms= 6.964e-04
npnt= 200 rms= 8.300e-04
non-planar
iface=13, nedg=4, nlup=1
EG_makeGeometry(SURFACE) -> status=0
EG_makeGeometry(PCURVE 0) -> status=0
EG_makeGeometry(PCURVE 1) -> status=0
EG_makeGeometry(PCURVE 2) -> status=0
EG_makeGeometry(PCURVE 3) -> status=0
EG_makeTopology(LOOP) -> status=0
EG_makeTopology(FACE) -> status=0
iface= 13 nfit= 93 rms= 6.968e-04
npnt= 154 rms= 7.962e-04
non-planar
iface=14, nedg=4, nlup=1
EG_makeGeometry(SURFACE) -> status=0
EG_makeGeometry(PCURVE 0) -> status=0
EG_makeGeometry(PCURVE 1) -> status=0
EG_makeGeometry(PCURVE 2) -> status=0
EG_makeGeometry(PCURVE 3) -> status=0
EG_makeTopology(LOOP) -> status=0
EG_makeTopology(FACE) -> status=0
iface= 14 nfit= 40 rms= 2.140e-04
npnt= 69 rms= 2.715e-04
planar
iface= 15 is planar, so accuracy is not computed
before makeTopology(SHELL, nfaces=15, closed=1)
File "../../OpenCSM/trunk/data/Slugs/demo1_1.egads" is being written
==> Closing input journal file
real 0m8.718s
user 0m13.128s
sys 0m0.073s
+++ set +x
demo1_0 passed (as expected)
+++ /Users/jenkins/workspace/ESP_UndefinedCaps/7.4/OpenCSM/data/Slugs/DARWINM1/ESP/DARWINM1/bin/serveESP ../../OpenCSM/trunk/data/Slugs/demo1_1 -outLevel 0 -batch -verify
==> serveESP completed successfully
real 0m0.745s
user 0m0.990s
sys 0m0.016s
+++ set +x
demo1_1 passed (as expected)
--------------------------------------------------------------------------------------------------
( 10 )
+++ /Users/jenkins/workspace/ESP_UndefinedCaps/7.4/OpenCSM/data/Slugs/DARWINM1/ESP/DARWINM1/bin/Slugs ../../OpenCSM/trunk/data/Slugs/duct_0 -outLevel 0 -batch -jrnl ../../OpenCSM/trunk/data/Slugs/duct_0.mod.jrnl -subsample 10
.........
After reading: npnt = 44875
ntri = 89746
==> Opening input journal file "../../OpenCSM/trunk/data/Slugs/duct_0.mod.jrnl"
starting dijkstra passes . done
starting dijkstra passes . done
starting dijkstra passes . done
starting dijkstra passes . done
starting dijkstra passes . done
Face 1
...at beginning
Edge 1, npnt= 65, ibeg= 1, iend= 2
Edge 2, npnt= 65, ibeg= 3, iend= 1
Edge 3, npnt= 68, ibeg= 4, iend= 3
Edge 4, npnt= 65, ibeg= 2, iend= 4
...after sorting into Loops
Loop 0 (0:3)
Edge 1, npnt= 65, ibeg= 1, iend= 2
Edge 4, npnt= 65, ibeg= 2, iend= 4
Edge 3, npnt= 68, ibeg= 4, iend= 3
Edge 2, npnt= 65, ibeg= 3, iend= 1
Face 2
...at beginning
Edge 5, npnt= 65, ibeg= 5, iend= 6
Edge 6, npnt= 65, ibeg= 6, iend= 7
Edge 7, npnt= 65, ibeg= 7, iend= 8
Edge 8, npnt= 65, ibeg= 8, iend= 5
...after sorting into Loops
Loop 0 (0:3)
Edge 5, npnt= 65, ibeg= 5, iend= 6
Edge 6, npnt= 65, ibeg= 6, iend= 7
Edge 7, npnt= 65, ibeg= 7, iend= 8
Edge 8, npnt= 65, ibeg= 8, iend= 5
Face 3
...at beginning
Edge -1, npnt= 65, iend= 2, ibeg= 1
Edge -5, npnt= 65, iend= 6, ibeg= 5
Edge 9, npnt= 257, ibeg= 1, iend= 6
Edge 10, npnt= 257, ibeg= 5, iend= 2
...after sorting into Loops
Loop 0 (0:3)
Edge -1, npnt= 65, iend= 2, ibeg= 1
Edge 9, npnt= 257, ibeg= 1, iend= 6
Edge -5, npnt= 65, iend= 6, ibeg= 5
Edge 10, npnt= 257, ibeg= 5, iend= 2
Face 4
...at beginning
Edge -2, npnt= 65, iend= 1, ibeg= 3
Edge -6, npnt= 65, iend= 7, ibeg= 6
Edge -9, npnt= 257, iend= 6, ibeg= 1
Edge 11, npnt= 257, ibeg= 3, iend= 7
...after sorting into Loops
Loop 0 (0:3)
Edge -2, npnt= 65, iend= 1, ibeg= 3
Edge 11, npnt= 257, ibeg= 3, iend= 7
Edge -6, npnt= 65, iend= 7, ibeg= 6
Edge -9, npnt= 257, iend= 6, ibeg= 1
Face 5
...at beginning
Edge -3, npnt= 68, iend= 3, ibeg= 4
Edge -7, npnt= 65, iend= 8, ibeg= 7
Edge -11, npnt= 257, iend= 7, ibeg= 3
Edge 12, npnt= 257, ibeg= 4, iend= 8
...after sorting into Loops
Loop 0 (0:3)
Edge -3, npnt= 68, iend= 3, ibeg= 4
Edge 12, npnt= 257, ibeg= 4, iend= 8
Edge -7, npnt= 65, iend= 8, ibeg= 7
Edge -11, npnt= 257, iend= 7, ibeg= 3
Face 6
...at beginning
Edge -4, npnt= 65, iend= 4, ibeg= 2
Edge -8, npnt= 65, iend= 5, ibeg= 8
Edge -10, npnt= 257, iend= 2, ibeg= 5
Edge -12, npnt= 257, iend= 8, ibeg= 4
...after sorting into Loops
Loop 0 (0:3)
Edge -4, npnt= 65, iend= 4, ibeg= 2
Edge -10, npnt= 257, iend= 2, ibeg= 5
Edge -8, npnt= 65, iend= 5, ibeg= 8
Edge -12, npnt= 257, iend= 8, ibeg= 4
fit1dCloud(npnt=65, ncp=9) -> status=0, numiter=384, normf= 5.8629e-04, dotmin= 0.9476, nmin=8
fit1dCloud(npnt=65, ncp=9) -> status=0, numiter=395, normf= 5.6069e-04, dotmin= 0.9557, nmin=7
fit1dCloud(npnt=68, ncp=9) -> status=0, numiter=422, normf= 7.8264e-04, dotmin= 0.8374, nmin=7
fit1dCloud(npnt=65, ncp=9) -> status=0, numiter=384, normf= 5.8568e-04, dotmin= 0.9481, nmin=8
fit1dCloud(npnt=65, ncp=9) -> status=0, numiter=412, normf= 5.9554e-04, dotmin= 0.8773, nmin=6
fit1dCloud(npnt=65, ncp=9) -> status=0, numiter=377, normf= 1.0059e-03, dotmin= 0.9148, nmin=8
fit1dCloud(npnt=65, ncp=9) -> status=0, numiter=377, normf= 1.0024e-03, dotmin= 0.9143, nmin=8
fit1dCloud(npnt=65, ncp=9) -> status=0, numiter=384, normf= 5.8556e-04, dotmin= 0.9482, nmin=8
fit1dCloud(npnt=257, ncp=9) -> status=0, numiter=231, normf= 2.3560e-03, dotmin= 0.9834, nmin=32
fit1dCloud(npnt=257, ncp=9) -> status=0, numiter= 13, normf= 1.4216e-06, dotmin= nan, nmin=32
fit1dCloud(npnt=257, ncp=9) -> status=0, numiter=169, normf= 1.8147e-03, dotmin= 0.9965, nmin=32
fit1dCloud(npnt=257, ncp=9) -> status=0, numiter=231, normf= 2.3560e-03, dotmin= 0.9834, nmin=32
generateFits(1D), CPU= 1.61 sec
iface= 1 npnt= 4177
nfit= 1133 ( 27%)
non-planar (fitting) ipnt=1, prod= -0.01239
extracting south control points from iedge= 1
extracting east control points from iedge= 4
extracting north control points from iedge= 3
extracting west control points from iedge= 2
iface= 2 npnt= 3644
nfit= 1042 ( 28%)
non-planar (fitting) ipnt=1, prod= -0.00118
extracting south control points from iedge= 5
extracting east control points from iedge= 6
extracting north control points from iedge= 7
extracting west control points from iedge= 8
iface= 3 npnt= 9696
nfit= 1850 ( 19%)
non-planar (fitting) ipnt=1, prod= 0.00170
extracting south control points from iedge= -1
extracting east control points from iedge= 9
extracting north control points from iedge= -5
extracting west control points from iedge= 10
iface= 4 npnt= 9511
nfit= 1715 ( 18%)
non-planar (fitting) ipnt=1, prod= -0.03111
extracting south control points from iedge= -2
extracting east control points from iedge= 11
extracting north control points from iedge= -6
extracting west control points from iedge= -9
iface= 5 npnt= 9673
nfit= 1721 ( 17%)
non-planar (fitting) ipnt=1, prod= 0.04501
extracting south control points from iedge= -3
extracting east control points from iedge= 12
extracting north control points from iedge= -7
extracting west control points from iedge= -11
iface= 6 npnt= 9717
nfit= 1697 ( 17%)
non-planar (fitting) ipnt=1, prod= 0.04433
extracting south control points from iedge= -4
extracting east control points from iedge= -10
extracting north control points from iedge= -8
extracting west control points from iedge= -12
ID 1f939ba80: is master
ID 1f939ba80: iface 3 has 1850 fitting Points
ID 16b943000: start thread
ID 16b943000: iface 5 has 1721 fitting Points
ID 16b943000: iface 5 complete with status=0, numiter= 17, normf= 1.7845e-03, dotmin= 0.8490, nmin= 13, npierce= 0
ID 16b943000: iface 4 has 1715 fitting Points
ID 1f939ba80: iface 3 complete with status=0, numiter= 16, normf= 1.5311e-03, dotmin= 0.8371, nmin= 12, npierce= 0
ID 1f939ba80: iface 6 has 1697 fitting Points
ID 1f939ba80: iface 6 complete with status=0, numiter= 15, normf= 1.2297e-03, dotmin= 0.8565, nmin= 8, npierce= 0
ID 1f939ba80: iface 1 has 1133 fitting Points
ID 1f939ba80: iface 1 complete with status=0, numiter= 16, normf= 6.4168e-04, dotmin= 0.9206, nmin= 18, npierce= 0
ID 1f939ba80: iface 2 has 1042 fitting Points
ID 16b943000: iface 4 complete with status=0, numiter= 30, normf= 1.8865e-03, dotmin= 0.8777, nmin= 11, npierce= 0
ID 16b943000: stop thread
ID 1f939ba80: iface 2 complete with status=0, numiter= 21, normf= 8.8714e-04, dotmin= 0.9535, nmin= 12, npierce= 0
generateFits(2D), CPU= 65.05 sec
inode= 1, nedg= 3, xyz= 2.28868 0.00000 8.70413
inode= 2, nedg= 3, xyz= 0.00000 2.00000 8.77496
inode= 3, nedg= 3, xyz= 0.00000 -2.27302 8.70824
inode= 4, nedg= 3, xyz= -2.28868 0.00000 8.70413
inode= 5, nedg= 3, xyz= 0.00000 2.00000 -8.77496
inode= 6, nedg= 3, xyz= 2.28810 0.00000 -8.70429
inode= 7, nedg= 3, xyz= 0.00000 -4.03040 -8.04711
inode= 8, nedg= 3, xyz= -2.28810 0.00000 -8.70429
iedge= 1, ibeg= 1, iend= 2, ileft= 1, irite= 3
iedge= 2, ibeg= 3, iend= 1, ileft= 1, irite= 4
iedge= 3, ibeg= 4, iend= 3, ileft= 1, irite= 5
iedge= 4, ibeg= 2, iend= 4, ileft= 1, irite= 6
iedge= 5, ibeg= 5, iend= 6, ileft= 2, irite= 3
iedge= 6, ibeg= 6, iend= 7, ileft= 2, irite= 4
iedge= 7, ibeg= 7, iend= 8, ileft= 2, irite= 5
iedge= 8, ibeg= 8, iend= 5, ileft= 2, irite= 6
iedge= 9, ibeg= 1, iend= 6, ileft= 3, irite= 4
iedge= 10, ibeg= 5, iend= 2, ileft= 3, irite= 6
iedge= 11, ibeg= 3, iend= 7, ileft= 4, irite= 5
iedge= 12, ibeg= 4, iend= 8, ileft= 5, irite= 6
iface= 1, icol= 1, nedg= 4, nlup= 1
edg= 1 4 3 2
lup= 0
iface= 2, icol= 2, nedg= 4, nlup= 1
edg= 5 6 7 8
lup= 0
iface= 3, icol= 3, nedg= 4, nlup= 1
edg= -1 9 -5 10
lup= 0
iface= 4, icol= 4, nedg= 4, nlup= 1
edg= -2 11 -6 -9
lup= 0
iface= 5, icol= 5, nedg= 4, nlup= 1
edg= -3 12 -7 -11
lup= 0
iface= 6, icol= 6, nedg= 4, nlup= 1
edg= -4 -10 -8 -12
lup= 0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
non-planar
iface=1, nedg=4, nlup=1
EG_makeGeometry(SURFACE) -> status=0
EG_makeGeometry(PCURVE 0) -> status=0
EG_makeGeometry(PCURVE 1) -> status=0
EG_makeGeometry(PCURVE 2) -> status=0
EG_makeGeometry(PCURVE 3) -> status=0
EG_makeTopology(LOOP) -> status=0
EG_makeTopology(FACE) -> status=0
iface= 1 nfit= 1133 rms= 5.776e-04
npnt= 4177 rms= 5.699e-04
non-planar
iface=2, nedg=4, nlup=1
EG_makeGeometry(SURFACE) -> status=0
EG_makeGeometry(PCURVE 0) -> status=0
EG_makeGeometry(PCURVE 1) -> status=0
EG_makeGeometry(PCURVE 2) -> status=0
EG_makeGeometry(PCURVE 3) -> status=0
EG_makeTopology(LOOP) -> status=0
EG_makeTopology(FACE) -> status=0
iface= 2 nfit= 1042 rms= 8.587e-04
npnt= 3644 rms= 8.815e-04
non-planar
iface=3, nedg=4, nlup=1
EG_makeGeometry(SURFACE) -> status=0
EG_makeGeometry(PCURVE 0) -> status=0
EG_makeGeometry(PCURVE 1) -> status=0
EG_makeGeometry(PCURVE 2) -> status=0
EG_makeGeometry(PCURVE 3) -> status=0
EG_makeTopology(LOOP) -> status=0
EG_makeTopology(FACE) -> status=0
iface= 3 nfit= 1850 rms= 2.020e-03
npnt= 9696 rms= 1.952e-03
non-planar
iface=4, nedg=4, nlup=1
EG_makeGeometry(SURFACE) -> status=0
EG_makeGeometry(PCURVE 0) -> status=0
EG_makeGeometry(PCURVE 1) -> status=0
EG_makeGeometry(PCURVE 2) -> status=0
EG_makeGeometry(PCURVE 3) -> status=0
EG_makeTopology(LOOP) -> status=0
EG_makeTopology(FACE) -> status=0
iface= 4 nfit= 1715 rms= 2.136e-03
npnt= 9511 rms= 2.113e-03
non-planar
iface=5, nedg=4, nlup=1
EG_makeGeometry(SURFACE) -> status=0
EG_makeGeometry(PCURVE 0) -> status=0
EG_makeGeometry(PCURVE 1) -> status=0
EG_makeGeometry(PCURVE 2) -> status=0
EG_makeGeometry(PCURVE 3) -> status=0
EG_makeTopology(LOOP) -> status=0
EG_makeTopology(FACE) -> status=0
iface= 5 nfit= 1721 rms= 2.125e-03
npnt= 9673 rms= 2.070e-03
non-planar
iface=6, nedg=4, nlup=1
EG_makeGeometry(SURFACE) -> status=0
EG_makeGeometry(PCURVE 0) -> status=0
EG_makeGeometry(PCURVE 1) -> status=0
EG_makeGeometry(PCURVE 2) -> status=0
EG_makeGeometry(PCURVE 3) -> status=0
EG_makeTopology(LOOP) -> status=0
EG_makeTopology(FACE) -> status=0
iface= 6 nfit= 1697 rms= 1.772e-03
npnt= 9717 rms= 1.789e-03
before makeTopology(SHELL, nfaces=6, closed=1)
File "../../OpenCSM/trunk/data/Slugs/duct_1.egads" is being written
==> Closing input journal file
real 1m34.540s
user 2m0.676s
sys 0m0.589s
+++ set +x
duct_0 passed (as expected)
+++ /Users/jenkins/workspace/ESP_UndefinedCaps/7.4/OpenCSM/data/Slugs/DARWINM1/ESP/DARWINM1/bin/serveESP ../../OpenCSM/trunk/data/Slugs/duct_1 -outLevel 0 -batch -verify
==> serveESP completed successfully
real 0m0.276s
user 0m0.342s
sys 0m0.009s
+++ set +x
duct_1 passed (as expected)
--------------------------------------------------------------------------------------------------
( 11 )
+++ /Users/jenkins/workspace/ESP_UndefinedCaps/7.4/OpenCSM/data/Slugs/DARWINM1/ESP/DARWINM1/bin/Slugs ../../OpenCSM/trunk/data/Slugs/eyeball_0 -outLevel 0 -batch -jrnl ../../OpenCSM/trunk/data/Slugs/eyeball_0.mod.jrnl
....
After reading: npnt = 17507
ntri = 35010
==> Opening input journal file "../../OpenCSM/trunk/data/Slugs/eyeball_0.mod.jrnl"
starting dijkstra passes . done
starting dijkstra passes . done
starting dijkstra passes . done
starting dijkstra passes . done
starting dijkstra passes . done
starting dijkstra passes . done
Face 1
...at beginning
Edge 1, npnt= 33, ibeg= 1, iend= 2
Edge 2, npnt= 33, ibeg= 2, iend= 1
...after sorting into Loops
Loop 0 (0:1)
Edge 1, npnt= 33, ibeg= 1, iend= 2
Edge 2, npnt= 33, ibeg= 2, iend= 1
Face 2
...at beginning
Edge 3, npnt= 33, ibeg= 3, iend= 4
Edge 4, npnt= 33, ibeg= 4, iend= 3
Edge 5, npnt= 65, ibeg= 5, iend= 6
Edge 6, npnt= 65, ibeg= 6, iend= 5
...after sorting into Loops
Loop 0 (0:1)
Edge 3, npnt= 33, ibeg= 3, iend= 4
Edge 4, npnt= 33, ibeg= 4, iend= 3
Loop 1 (2:3)
Edge 5, npnt= 65, ibeg= 5, iend= 6
Edge 6, npnt= 65, ibeg= 6, iend= 5
Loop 0 starts at i= 0 (iedge= 3) and has area 3.968057
Loop 1 starts at i= 2 (iedge= 5) and has area 0.565260
...after sorting Loops so that largest area is first
Loop 0 (0:1)
Edge 3, npnt= 33, ibeg= 3, iend= 4
Edge 4, npnt= 33, ibeg= 4, iend= 3
Loop 1 (2:3)
Edge 5, npnt= 65, ibeg= 5, iend= 6
Edge 6, npnt= 65, ibeg= 6, iend= 5
there are 2 Loops, so no face* file created
Face 3
...at beginning
Edge -1, npnt= 33, iend= 2, ibeg= 1
Edge -3, npnt= 33, iend= 4, ibeg= 3
Edge 7, npnt= 65, ibeg= 3, iend= 2
Edge 8, npnt= 65, ibeg= 1, iend= 4
...after sorting into Loops
Loop 0 (0:3)
Edge -1, npnt= 33, iend= 2, ibeg= 1
Edge 8, npnt= 65, ibeg= 1, iend= 4
Edge -3, npnt= 33, iend= 4, ibeg= 3
Edge 7, npnt= 65, ibeg= 3, iend= 2
Face 4
...at beginning
Edge -2, npnt= 33, iend= 1, ibeg= 2
Edge -4, npnt= 33, iend= 3, ibeg= 4
Edge -7, npnt= 65, iend= 2, ibeg= 3
Edge -8, npnt= 65, iend= 4, ibeg= 1
...after sorting into Loops
Loop 0 (0:3)
Edge -2, npnt= 33, iend= 1, ibeg= 2
Edge -7, npnt= 65, iend= 2, ibeg= 3
Edge -4, npnt= 33, iend= 3, ibeg= 4
Edge -8, npnt= 65, iend= 4, ibeg= 1
Face 5
...at beginning
Edge -5, npnt= 65, iend= 6, ibeg= 5
Edge 9, npnt= 33, ibeg= 5, iend= 7
Edge 10, npnt= 33, ibeg= 8, iend= 6
Edge 11, npnt= 65, ibeg= 7, iend= 8
...after sorting into Loops
Loop 0 (0:3)
Edge -5, npnt= 65, iend= 6, ibeg= 5
Edge 9, npnt= 33, ibeg= 5, iend= 7
Edge 11, npnt= 65, ibeg= 7, iend= 8
Edge 10, npnt= 33, ibeg= 8, iend= 6
Face 6
...at beginning
Edge -6, npnt= 65, iend= 5, ibeg= 6
Edge -9, npnt= 33, iend= 7, ibeg= 5
Edge -10, npnt= 33, iend= 6, ibeg= 8
Edge 12, npnt= 65, ibeg= 8, iend= 7
...after sorting into Loops
Loop 0 (0:3)
Edge -6, npnt= 65, iend= 5, ibeg= 6
Edge -10, npnt= 33, iend= 6, ibeg= 8
Edge 12, npnt= 65, ibeg= 8, iend= 7
Edge -9, npnt= 33, iend= 7, ibeg= 5
Face 7
...at beginning
Edge -11, npnt= 65, iend= 8, ibeg= 7
Edge -12, npnt= 65, iend= 7, ibeg= 8
Edge 13, npnt= 65, ibeg= 9, iend= 10
Edge 14, npnt= 65, ibeg= 10, iend= 9
...after sorting into Loops
Loop 0 (0:1)
Edge -11, npnt= 65, iend= 8, ibeg= 7
Edge -12, npnt= 65, iend= 7, ibeg= 8
Loop 1 (2:3)
Edge 13, npnt= 65, ibeg= 9, iend= 10
Edge 14, npnt= 65, ibeg= 10, iend= 9
Loop 0 starts at i= 0 (iedge= -11) and has area 0.565260
Loop 1 starts at i= 2 (iedge= 13) and has area 0.062807
...after sorting Loops so that largest area is first
Loop 0 (0:1)
Edge -11, npnt= 65, iend= 8, ibeg= 7
Edge -12, npnt= 65, iend= 7, ibeg= 8
Loop 1 (2:3)
Edge 13, npnt= 65, ibeg= 9, iend= 10
Edge 14, npnt= 65, ibeg= 10, iend= 9
there are 2 Loops, so no face* file created
Face 8
...at beginning
Edge -13, npnt= 65, iend= 10, ibeg= 9
Edge 15, npnt= 65, ibeg= 9, iend= 11
Edge 16, npnt= 65, ibeg= 12, iend= 10
Edge 17, npnt= 65, ibeg= 11, iend= 12
...after sorting into Loops
Loop 0 (0:3)
Edge -13, npnt= 65, iend= 10, ibeg= 9
Edge 15, npnt= 65, ibeg= 9, iend= 11
Edge 17, npnt= 65, ibeg= 11, iend= 12
Edge 16, npnt= 65, ibeg= 12, iend= 10
Face 9
...at beginning
Edge -14, npnt= 65, iend= 9, ibeg= 10
Edge -15, npnt= 65, iend= 11, ibeg= 9
Edge -16, npnt= 65, iend= 10, ibeg= 12
Edge 18, npnt= 65, ibeg= 12, iend= 11
...after sorting into Loops
Loop 0 (0:3)
Edge -14, npnt= 65, iend= 9, ibeg= 10
Edge -16, npnt= 65, iend= 10, ibeg= 12
Edge 18, npnt= 65, ibeg= 12, iend= 11
Edge -15, npnt= 65, iend= 11, ibeg= 9
Face 10
...at beginning
Edge -17, npnt= 65, iend= 12, ibeg= 11
Edge -18, npnt= 65, iend= 11, ibeg= 12
...after sorting into Loops
Loop 0 (0:1)
Edge -17, npnt= 65, iend= 12, ibeg= 11
Edge -18, npnt= 65, iend= 11, ibeg= 12
fit1dCloud(npnt=33, ncp=9) -> status=0, numiter=576, normf= 4.2086e-04, dotmin= 0.9150, nmin=4
fit1dCloud(npnt=33, ncp=9) -> status=0, numiter=576, normf= 4.2085e-04, dotmin= 0.9150, nmin=4
fit1dCloud(npnt=33, ncp=9) -> status=0, numiter=576, normf= 4.2086e-04, dotmin= 0.9150, nmin=4
fit1dCloud(npnt=33, ncp=9) -> status=0, numiter=576, normf= 4.2085e-04, dotmin= 0.9150, nmin=4
fit1dCloud(npnt=65, ncp=9) -> status=0, numiter=669, normf= 1.0793e-04, dotmin= 0.8847, nmin=8
fit1dCloud(npnt=65, ncp=9) -> status=0, numiter=669, normf= 1.0793e-04, dotmin= 0.8847, nmin=8
fit1dCloud(npnt=65, ncp=9) -> status=0, numiter= 10, normf= 8.9740e-07, dotmin= nan, nmin=8
fit1dCloud(npnt=65, ncp=9) -> status=0, numiter= 10, normf= 8.9740e-07, dotmin= nan, nmin=8
fit1dCloud(npnt=33, ncp=9) -> status=0, numiter= 9, normf= 4.0663e-07, dotmin= nan, nmin=4
fit1dCloud(npnt=33, ncp=9) -> status=0, numiter= 9, normf= 4.0663e-07, dotmin= nan, nmin=4
fit1dCloud(npnt=65, ncp=9) -> status=0, numiter=669, normf= 1.0793e-04, dotmin= 0.8847, nmin=8
fit1dCloud(npnt=65, ncp=9) -> status=0, numiter=669, normf= 1.0793e-04, dotmin= 0.8847, nmin=8
fit1dCloud(npnt=65, ncp=9) -> status=0, numiter=669, normf= 3.5975e-05, dotmin= 0.8847, nmin=8
fit1dCloud(npnt=65, ncp=9) -> status=0, numiter=669, normf= 3.5975e-05, dotmin= 0.8847, nmin=8
fit1dCloud(npnt=65, ncp=9) -> status=0, numiter= 10, normf= 4.8498e-07, dotmin= nan, nmin=8
fit1dCloud(npnt=65, ncp=9) -> status=0, numiter= 10, normf= 4.8498e-07, dotmin= nan, nmin=8
fit1dCloud(npnt=65, ncp=9) -> status=0, numiter=669, normf= 3.5975e-05, dotmin= 0.8847, nmin=8
fit1dCloud(npnt=65, ncp=9) -> status=0, numiter=669, normf= 3.5975e-05, dotmin= 0.8847, nmin=8
generateFits(1D), CPU= 2.08 sec
iface= 1 npnt= 283
nfit= 175 ( 61%)
non-planar (fitting) ipnt=1, prod= -0.00841
extracting south control points from iedge= 1
copying east control points from degen -0.9539 0.0000 -1.7578
extracting north control points from iedge= 2
copying west control points from degen 0.9539 0.0000 -1.7578
iface= 2 npnt= 966
nfit= 391 ( 40%)
non-planar (fitting) ipnt=1, prod= 0.02887
extracting south control points from iedge= 3
copying east control points from degen 0.9539 0.0000 1.7578
extracting north control points from iedge= 4
copying west control points from degen -0.9539 0.0000 1.7578
iface= 3 npnt= 2122
nfit= 951 ( 44%)
non-planar (fitting) ipnt=1, prod= -0.07061
extracting south control points from iedge= -1
extracting east control points from iedge= 8
extracting north control points from iedge= -3
extracting west control points from iedge= 7
iface= 4 npnt= 2138
nfit= 954 ( 44%)
non-planar (fitting) ipnt=1, prod= -0.05724
extracting south control points from iedge= -2
extracting east control points from iedge= -7
extracting north control points from iedge= -4
extracting west control points from iedge= -8
iface= 5 npnt= 1960
nfit= 932 ( 47%)
non-planar (fitting) ipnt=1, prod= -0.01252
extracting south control points from iedge= -5
extracting east control points from iedge= 9
extracting north control points from iedge= 11
extracting west control points from iedge= 10
iface= 6 npnt= 1943
nfit= 969 ( 49%)
non-planar (fitting) ipnt=1, prod= 0.00697
extracting south control points from iedge= -6
extracting east control points from iedge= -10
extracting north control points from iedge= 12
extracting west control points from iedge= -9
iface= 7 npnt= 2403
nfit= 2403 (100%)
iface= 8 npnt= 2749
nfit= 1229 ( 44%)
non-planar (fitting) ipnt=1, prod= -0.00391
extracting south control points from iedge= -13
extracting east control points from iedge= 15
extracting north control points from iedge= 17
extracting west control points from iedge= 16
iface= 9 npnt= 2775
nfit= 1219 ( 43%)
non-planar (fitting) ipnt=1, prod= -0.00323
extracting south control points from iedge= -14
extracting east control points from iedge= -16
extracting north control points from iedge= 18
extracting west control points from iedge= -15
iface= 10 npnt= 1134
nfit= 1134 (100%)
ID 1f939ba80: is master
ID 1f939ba80: iface 7 has 2403 fitting Points
ID 1f939ba80: iface 7 skipped
ID 1f939ba80: iface 8 has 1229 fitting Points
ID 16b74b000: start thread
ID 16b74b000: iface 9 has 1219 fitting Points
ID 16b74b000: iface 9 complete with status=0, numiter= 8, normf= 3.7416e-05, dotmin= 0.8852, nmin= 13, npierce= 0
ID 16b74b000: iface 10 has 1134 fitting Points
ID 16b74b000: iface 10 skipped
ID 16b74b000: iface 6 has 969 fitting Points
ID 1f939ba80: iface 8 complete with status=0, numiter= 8, normf= 3.7335e-05, dotmin= 0.8846, nmin= 13, npierce= 0
ID 1f939ba80: iface 4 has 954 fitting Points
ID 1f939ba80: iface 4 complete with status=0, numiter= 11, normf= 4.2531e-04, dotmin= 0.9155, nmin= 12, npierce= 0
ID 1f939ba80: iface 3 has 951 fitting Points
ID 16b74b000: iface 6 complete with status=0, numiter= 12, normf= 1.0763e-04, dotmin= 0.8857, nmin= 13, npierce= 0
ID 16b74b000: iface 5 has 932 fitting Points
ID 16b74b000: iface 5 complete with status=0, numiter= 7, normf= 1.0685e-04, dotmin= 0.8844, nmin= 13, npierce= 0
ID 16b74b000: iface 2 has 391 fitting Points
ID 1f939ba80: iface 3 complete with status=0, numiter= 13, normf= 4.0998e-04, dotmin= 0.9161, nmin= 12, npierce= 0
ID 1f939ba80: iface 1 has 175 fitting Points
ID 1f939ba80: iface 1 complete with status=-6, numiter=100, normf= 8.7598e-04, dotmin= nan, nmin= 0, npierce= 42
ID 16b74b000: iface 2 complete with status=-6, numiter=100, normf= 3.2273e-04, dotmin= 0.9171, nmin= 2, npierce= 42
ID 16b74b000: stop thread
generateFits(2D), CPU= 45.32 sec
inode= 1, nedg= 3, xyz= 0.95394 0.00000 -1.75784
inode= 2, nedg= 3, xyz= -0.95394 0.00000 -1.75784
inode= 3, nedg= 3, xyz= -0.95394 0.00000 1.75784
inode= 4, nedg= 3, xyz= 0.95394 0.00000 1.75784
inode= 5, nedg= 3, xyz= 0.30000 -0.00000 1.97737
inode= 6, nedg= 3, xyz= -0.30000 0.00000 1.97737
inode= 7, nedg= 3, xyz= 0.30000 -0.00000 0.00000
inode= 8, nedg= 3, xyz= -0.30000 0.00000 0.00000
inode= 9, nedg= 3, xyz= 0.10000 -0.00000 0.00000
inode= 10, nedg= 3, xyz= -0.10000 0.00000 0.00000
inode= 11, nedg= 3, xyz= 0.10000 -0.00000 1.90000
inode= 12, nedg= 3, xyz= -0.10000 0.00000 1.90000
iedge= 1, ibeg= 1, iend= 2, ileft= 1, irite= 3
iedge= 2, ibeg= 2, iend= 1, ileft= 1, irite= 4
iedge= 3, ibeg= 3, iend= 4, ileft= 2, irite= 3
iedge= 4, ibeg= 4, iend= 3, ileft= 2, irite= 4
iedge= 5, ibeg= 5, iend= 6, ileft= 2, irite= 5
iedge= 6, ibeg= 6, iend= 5, ileft= 2, irite= 6
iedge= 7, ibeg= 3, iend= 2, ileft= 3, irite= 4
iedge= 8, ibeg= 1, iend= 4, ileft= 3, irite= 4
iedge= 9, ibeg= 5, iend= 7, ileft= 5, irite= 6
iedge= 10, ibeg= 8, iend= 6, ileft= 5, irite= 6
iedge= 11, ibeg= 7, iend= 8, ileft= 5, irite= 7
iedge= 12, ibeg= 8, iend= 7, ileft= 6, irite= 7
iedge= 13, ibeg= 9, iend= 10, ileft= 7, irite= 8
iedge= 14, ibeg= 10, iend= 9, ileft= 7, irite= 9
iedge= 15, ibeg= 9, iend= 11, ileft= 8, irite= 9
iedge= 16, ibeg= 12, iend= 10, ileft= 8, irite= 9
iedge= 17, ibeg= 11, iend= 12, ileft= 8, irite= 10
iedge= 18, ibeg= 12, iend= 11, ileft= 9, irite= 10
iface= 1, icol= 1, nedg= 2, nlup= 1
edg= 1 2
lup= 0
iface= 2, icol= 2, nedg= 4, nlup= 2
edg= 3 4 5 6
lup= 0 2
iface= 3, icol= 3, nedg= 4, nlup= 1
edg= -1 8 -3 7
lup= 0
iface= 4, icol= 4, nedg= 4, nlup= 1
edg= -2 -7 -4 -8
lup= 0
iface= 5, icol= 5, nedg= 4, nlup= 1
edg= -5 9 11 10
lup= 0
iface= 6, icol= 6, nedg= 4, nlup= 1
edg= -6 -10 12 -9
lup= 0
iface= 7, icol= 7, nedg= 4, nlup= 2
edg= -11 -12 13 14
lup= 0 2
iface= 8, icol= 8, nedg= 4, nlup= 1
edg= -13 15 17 16
lup= 0
iface= 9, icol= 9, nedg= 4, nlup= 1
edg= -14 -16 18 -15
lup= 0
iface= 10, icol= 10, nedg= 2, nlup= 1
edg= -17 -18
lup= 0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
non-planar
iface=1, nedg=2, nlup=1
EG_makeGeometry(SURFACE) -> status=0
EG_makeGeometry(PCURVE 0) -> status=0
EG_makeTopology(DEGEN 1) -> status=0
EG_makeGeometry(PCURVE 1) -> status=0
EG_makeGeometry(PCURVE 2) -> status=0
EG_makeTopology(DEGEN 3) -> status=0
EG_makeGeometry(PCURVE 3) -> status=0
EG_makeTopology(LOOP) -> status=0
EG_makeTopology(FACE) -> status=0
iface= 1 nfit= 175 rms= 6.382e-04
npnt= 281 rms= 6.817e-04
non-planar
iface=2, nedg=4, nlup=2
EG_makeGeometry(SURFACE) -> status=0
EG_makeGeometry(PCURVE 0) -> status=0
EG_makeTopology(DEGEN 1) -> status=0
EG_makeGeometry(PCURVE 1) -> status=0
EG_makeGeometry(PCURVE 2) -> status=0
EG_makeTopology(DEGEN 3) -> status=0
EG_makeGeometry(PCURVE 3) -> status=0
EG_makeTopology(LOOP) -> status=0
EG_otherCurve(0) -> status=0
EG_otherCurve(1) -> status=0
EG_makeTopology(FACE) -> status=0
iface= 2 nfit= 391 rms= 2.955e-04
npnt= 964 rms= 2.651e-04
non-planar
iface=3, nedg=4, nlup=1
EG_makeGeometry(SURFACE) -> status=0
EG_makeGeometry(PCURVE 0) -> status=0
EG_makeGeometry(PCURVE 1) -> status=0
EG_makeGeometry(PCURVE 2) -> status=0
EG_makeGeometry(PCURVE 3) -> status=0
EG_makeTopology(LOOP) -> status=0
EG_makeTopology(FACE) -> status=0
iface= 3 nfit= 951 rms= 6.740e-04
npnt= 2122 rms= 6.591e-04
non-planar
iface=4, nedg=4, nlup=1
EG_makeGeometry(SURFACE) -> status=0
EG_makeGeometry(PCURVE 0) -> status=0
EG_makeGeometry(PCURVE 1) -> status=0
EG_makeGeometry(PCURVE 2) -> status=0
EG_makeGeometry(PCURVE 3) -> status=0
EG_makeTopology(LOOP) -> status=0
EG_makeTopology(FACE) -> status=0
iface= 4 nfit= 954 rms= 7.096e-04
npnt= 2138 rms= 6.807e-04
non-planar
iface=5, nedg=4, nlup=1
EG_makeGeometry(SURFACE) -> status=0
EG_makeGeometry(PCURVE 0) -> status=0
EG_makeGeometry(PCURVE 1) -> status=0
EG_makeGeometry(PCURVE 2) -> status=0
EG_makeGeometry(PCURVE 3) -> status=0
EG_makeTopology(LOOP) -> status=0
EG_makeTopology(FACE) -> status=0
iface= 5 nfit= 932 rms= 1.893e-04
npnt= 1960 rms= 1.876e-04
non-planar
iface=6, nedg=4, nlup=1
EG_makeGeometry(SURFACE) -> status=0
EG_makeGeometry(PCURVE 0) -> status=0
EG_makeGeometry(PCURVE 1) -> status=0
EG_makeGeometry(PCURVE 2) -> status=0
EG_makeGeometry(PCURVE 3) -> status=0
EG_makeTopology(LOOP) -> status=0
EG_makeTopology(FACE) -> status=0
iface= 6 nfit= 969 rms= 1.872e-04
npnt= 1943 rms= 1.830e-04
planar
iface= 7 is planar, so accuracy is not computed
non-planar
iface=8, nedg=4, nlup=1
EG_makeGeometry(SURFACE) -> status=0
EG_makeGeometry(PCURVE 0) -> status=0
EG_makeGeometry(PCURVE 1) -> status=0
EG_makeGeometry(PCURVE 2) -> status=0
EG_makeGeometry(PCURVE 3) -> status=0
EG_makeTopology(LOOP) -> status=0
EG_makeTopology(FACE) -> status=0
iface= 8 nfit= 1229 rms= 6.457e-05
npnt= 2749 rms= 6.472e-05
non-planar
iface=9, nedg=4, nlup=1
EG_makeGeometry(SURFACE) -> status=0
EG_makeGeometry(PCURVE 0) -> status=0
EG_makeGeometry(PCURVE 1) -> status=0
EG_makeGeometry(PCURVE 2) -> status=0
EG_makeGeometry(PCURVE 3) -> status=0
EG_makeTopology(LOOP) -> status=0
EG_makeTopology(FACE) -> status=0
iface= 9 nfit= 1219 rms= 6.480e-05
npnt= 2775 rms= 6.511e-05
planar
iface= 10 is planar, so accuracy is not computed
before makeTopology(SHELL, nfaces=10, closed=1)
File "../../OpenCSM/trunk/data/Slugs/eyeball_1.egads" is being written
==> Closing input journal file
real 0m48.409s
user 1m5.094s
sys 0m0.323s
+++ set +x
eyeball_0 passed (as expected)
+++ /Users/jenkins/workspace/ESP_UndefinedCaps/7.4/OpenCSM/data/Slugs/DARWINM1/ESP/DARWINM1/bin/serveESP ../../OpenCSM/trunk/data/Slugs/eyeball_1 -outLevel 0 -batch -verify
==> serveESP completed successfully with 1 warnings
real 0m0.961s
user 0m1.077s
sys 0m0.011s
+++ set +x
eyeball_1 passed (as expected)
--------------------------------------------------------------------------------------------------
( 12 )
+++ /Users/jenkins/workspace/ESP_UndefinedCaps/7.4/OpenCSM/data/Slugs/DARWINM1/ESP/DARWINM1/bin/Slugs ../../OpenCSM/trunk/data/Slugs/holes_0 -outLevel 0 -batch -jrnl ../../OpenCSM/trunk/data/Slugs/holes_0.mod.jrnl
.
After reading: npnt = 1811
ntri = 3626
==> Opening input journal file "../../OpenCSM/trunk/data/Slugs/holes_0.mod.jrnl"
starting dijkstra passes . done
starting dijkstra passes . done
starting dijkstra passes . done
starting dijkstra passes . done
Face 1
...at beginning
Edge 1, npnt= 9, ibeg= 1, iend= 2
Edge 2, npnt= 9, ibeg= 3, iend= 4
Edge 3, npnt= 17, ibeg= 4, iend= 1
Edge 4, npnt= 17, ibeg= 2, iend= 3
...after sorting into Loops
Loop 0 (0:3)
Edge 1, npnt= 9, ibeg= 1, iend= 2
Edge 4, npnt= 17, ibeg= 2, iend= 3
Edge 2, npnt= 9, ibeg= 3, iend= 4
Edge 3, npnt= 17, ibeg= 4, iend= 1
Face 2
...at beginning
Edge -1, npnt= 9, iend= 2, ibeg= 1
Edge -2, npnt= 9, iend= 4, ibeg= 3
Edge 5, npnt= 17, ibeg= 1, iend= 4
Edge 6, npnt= 17, ibeg= 3, iend= 2
...after sorting into Loops
Loop 0 (0:3)
Edge -1, npnt= 9, iend= 2, ibeg= 1
Edge 5, npnt= 17, ibeg= 1, iend= 4
Edge -2, npnt= 9, iend= 4, ibeg= 3
Edge 6, npnt= 17, ibeg= 3, iend= 2
Face 3
...at beginning
Edge -3, npnt= 17, iend= 1, ibeg= 4
Edge -5, npnt= 17, iend= 4, ibeg= 1
Edge 7, npnt= 17, ibeg= 5, iend= 6
Edge 8, npnt= 33, ibeg= 6, iend= 7
Edge 9, npnt= 33, ibeg= 8, iend= 5
Edge 10, npnt= 17, ibeg= 9, iend= 10
Edge 11, npnt= 17, ibeg= 10, iend= 9
Edge 12, npnt= 17, ibeg= 7, iend= 8
...after sorting into Loops
Loop 0 (0:1)
Edge -3, npnt= 17, iend= 1, ibeg= 4
Edge -5, npnt= 17, iend= 4, ibeg= 1
Loop 1 (2:5)
Edge 7, npnt= 17, ibeg= 5, iend= 6
Edge 8, npnt= 33, ibeg= 6, iend= 7
Edge 12, npnt= 17, ibeg= 7, iend= 8
Edge 9, npnt= 33, ibeg= 8, iend= 5
Loop 2 (6:7)
Edge 11, npnt= 17, ibeg= 10, iend= 9
Edge 10, npnt= 17, ibeg= 9, iend= 10
Loop 0 starts at i= 0 (iedge= -3) and has area 1.560723
Loop 1 starts at i= 2 (iedge= 7) and has area 16.000009
Loop 2 starts at i= 6 (iedge= 11) and has area 1.560723
...after sorting Loops so that largest area is first
Loop 0 (0:3)
Edge 7, npnt= 17, ibeg= 5, iend= 6
Edge 8, npnt= 33, ibeg= 6, iend= 7
Edge 12, npnt= 17, ibeg= 7, iend= 8
Edge 9, npnt= 33, ibeg= 8, iend= 5
Loop 1 (4:5)
Edge -3, npnt= 17, iend= 1, ibeg= 4
Edge -5, npnt= 17, iend= 4, ibeg= 1
Loop 2 (6:7)
Edge 11, npnt= 17, ibeg= 10, iend= 9
Edge 10, npnt= 17, ibeg= 9, iend= 10
there are 3 Loops, so no face* file created
Face 4
...at beginning
Edge -7, npnt= 17, iend= 6, ibeg= 5
Edge 13, npnt= 17, ibeg= 11, iend= 12
Edge 14, npnt= 9, ibeg= 12, iend= 6
Edge 15, npnt= 9, ibeg= 5, iend= 11
...after sorting into Loops
Loop 0 (0:3)
Edge -7, npnt= 17, iend= 6, ibeg= 5
Edge 15, npnt= 9, ibeg= 5, iend= 11
Edge 13, npnt= 17, ibeg= 11, iend= 12
Edge 14, npnt= 9, ibeg= 12, iend= 6
Face 5
...at beginning
Edge -4, npnt= 17, iend= 3, ibeg= 2
Edge -6, npnt= 17, iend= 2, ibeg= 3
Edge -13, npnt= 17, iend= 12, ibeg= 11
Edge 16, npnt= 33, ibeg= 13, iend= 12
Edge 17, npnt= 33, ibeg= 11, iend= 14
Edge 18, npnt= 17, ibeg= 15, iend= 16
Edge 19, npnt= 17, ibeg= 16, iend= 15
Edge 20, npnt= 17, ibeg= 14, iend= 13
...after sorting into Loops
Loop 0 (0:1)
Edge -4, npnt= 17, iend= 3, ibeg= 2
Edge -6, npnt= 17, iend= 2, ibeg= 3
Loop 1 (2:5)
Edge -13, npnt= 17, iend= 12, ibeg= 11
Edge 17, npnt= 33, ibeg= 11, iend= 14
Edge 20, npnt= 17, ibeg= 14, iend= 13
Edge 16, npnt= 33, ibeg= 13, iend= 12
Loop 2 (6:7)
Edge 19, npnt= 17, ibeg= 16, iend= 15
Edge 18, npnt= 17, ibeg= 15, iend= 16
Loop 0 starts at i= 0 (iedge= -4) and has area 1.560723
Loop 1 starts at i= 2 (iedge= -13) and has area 16.000007
Loop 2 starts at i= 6 (iedge= 19) and has area 1.560723
...after sorting Loops so that largest area is first
Loop 0 (0:3)
Edge -13, npnt= 17, iend= 12, ibeg= 11
Edge 17, npnt= 33, ibeg= 11, iend= 14
Edge 20, npnt= 17, ibeg= 14, iend= 13
Edge 16, npnt= 33, ibeg= 13, iend= 12
Loop 1 (4:5)
Edge 19, npnt= 17, ibeg= 16, iend= 15
Edge 18, npnt= 17, ibeg= 15, iend= 16
Loop 2 (6:7)
Edge -4, npnt= 17, iend= 3, ibeg= 2
Edge -6, npnt= 17, iend= 2, ibeg= 3
there are 3 Loops, so no face* file created
Face 6
...at beginning
Edge -8, npnt= 33, iend= 7, ibeg= 6
Edge -14, npnt= 9, iend= 6, ibeg= 12
Edge -16, npnt= 33, iend= 12, ibeg= 13
Edge 21, npnt= 9, ibeg= 13, iend= 7
...after sorting into Loops
Loop 0 (0:3)
Edge -8, npnt= 33, iend= 7, ibeg= 6
Edge -14, npnt= 9, iend= 6, ibeg= 12
Edge -16, npnt= 33, iend= 12, ibeg= 13
Edge 21, npnt= 9, ibeg= 13, iend= 7
Face 7
...at beginning
Edge -9, npnt= 33, iend= 5, ibeg= 8
Edge -15, npnt= 9, iend= 11, ibeg= 5
Edge -17, npnt= 33, iend= 14, ibeg= 11
Edge 22, npnt= 9, ibeg= 8, iend= 14
...after sorting into Loops
Loop 0 (0:3)
Edge -9, npnt= 33, iend= 5, ibeg= 8
Edge 22, npnt= 9, ibeg= 8, iend= 14
Edge -17, npnt= 33, iend= 14, ibeg= 11
Edge -15, npnt= 9, iend= 11, ibeg= 5
Face 8
...at beginning
Edge -10, npnt= 17, iend= 10, ibeg= 9
Edge -18, npnt= 17, iend= 16, ibeg= 15
Edge 23, npnt= 9, ibeg= 15, iend= 10
Edge 24, npnt= 9, ibeg= 9, iend= 16
...after sorting into Loops
Loop 0 (0:3)
Edge -10, npnt= 17, iend= 10, ibeg= 9
Edge 24, npnt= 9, ibeg= 9, iend= 16
Edge -18, npnt= 17, iend= 16, ibeg= 15
Edge 23, npnt= 9, ibeg= 15, iend= 10
Face 9
...at beginning
Edge -11, npnt= 17, iend= 9, ibeg= 10
Edge -19, npnt= 17, iend= 15, ibeg= 16
Edge -23, npnt= 9, iend= 10, ibeg= 15
Edge -24, npnt= 9, iend= 16, ibeg= 9
...after sorting into Loops
Loop 0 (0:3)
Edge -11, npnt= 17, iend= 9, ibeg= 10
Edge -23, npnt= 9, iend= 10, ibeg= 15
Edge -19, npnt= 17, iend= 15, ibeg= 16
Edge -24, npnt= 9, iend= 16, ibeg= 9
Face 10
...at beginning
Edge -12, npnt= 17, iend= 8, ibeg= 7
Edge -20, npnt= 17, iend= 13, ibeg= 14
Edge -21, npnt= 9, iend= 7, ibeg= 13
Edge -22, npnt= 9, iend= 14, ibeg= 8
...after sorting into Loops
Loop 0 (0:3)
Edge -12, npnt= 17, iend= 8, ibeg= 7
Edge -21, npnt= 9, iend= 7, ibeg= 13
Edge -20, npnt= 17, iend= 13, ibeg= 14
Edge -22, npnt= 9, iend= 14, ibeg= 8
fit1dCloud(npnt=9, ncp=7) -> status=0, numiter= 8, normf= 4.9372e-08, dotmin= 1.0000, nmin=1
fit1dCloud(npnt=9, ncp=7) -> status=0, numiter= 8, normf= 2.6189e-08, dotmin= 1.0000, nmin=1
fit1dCloud(npnt=17, ncp=7) -> status=0, numiter=1000, normf= 3.5838e-04, dotmin= 0.7847, nmin=3
fit1dCloud(npnt=17, ncp=7) -> status=0, numiter=1000, normf= 3.5839e-04, dotmin= 0.7847, nmin=3
fit1dCloud(npnt=17, ncp=7) -> status=0, numiter=1000, normf= 3.5837e-04, dotmin= 0.7847, nmin=3
fit1dCloud(npnt=17, ncp=7) -> status=0, numiter=1000, normf= 3.5837e-04, dotmin= 0.7847, nmin=3
fit1dCloud(npnt=17, ncp=7) -> status=0, numiter= 8, normf= 8.0133e-08, dotmin= nan, nmin=2
fit1dCloud(npnt=33, ncp=7) -> status=0, numiter= 8, normf= 7.6465e-07, dotmin= 1.0000, nmin=5
fit1dCloud(npnt=33, ncp=7) -> status=0, numiter= 8, normf= 7.6465e-07, dotmin= 1.0000, nmin=5
fit1dCloud(npnt=17, ncp=7) -> status=0, numiter=1000, normf= 3.5840e-04, dotmin= 0.7847, nmin=3
fit1dCloud(npnt=17, ncp=7) -> status=0, numiter=1000, normf= 3.5842e-04, dotmin= 0.7847, nmin=3
fit1dCloud(npnt=17, ncp=7) -> status=0, numiter= 8, normf= 8.0133e-08, dotmin= nan, nmin=2
fit1dCloud(npnt=17, ncp=7) -> status=0, numiter= 8, normf= 8.0133e-08, dotmin= nan, nmin=2
fit1dCloud(npnt=9, ncp=7) -> status=0, numiter= 8, normf= 4.9639e-08, dotmin= 1.0000, nmin=1
fit1dCloud(npnt=9, ncp=7) -> status=0, numiter= 8, normf= 4.9639e-08, dotmin= 1.0000, nmin=1
fit1dCloud(npnt=33, ncp=7) -> status=0, numiter= 8, normf= 7.6337e-07, dotmin= 1.0000, nmin=5
fit1dCloud(npnt=33, ncp=7) -> status=0, numiter= 8, normf= 7.6337e-07, dotmin= 1.0000, nmin=5
fit1dCloud(npnt=17, ncp=7) -> status=0, numiter=1000, normf= 3.5838e-04, dotmin= 0.7847, nmin=3
fit1dCloud(npnt=17, ncp=7) -> status=0, numiter=1000, normf= 3.5840e-04, dotmin= 0.7847, nmin=3
fit1dCloud(npnt=17, ncp=7) -> status=0, numiter= 8, normf= 8.0133e-08, dotmin= nan, nmin=2
fit1dCloud(npnt=9, ncp=7) -> status=0, numiter= 8, normf= 1.2037e-08, dotmin= 1.0000, nmin=1
fit1dCloud(npnt=9, ncp=7) -> status=0, numiter= 8, normf= 1.2037e-08, dotmin= 1.0000, nmin=1
fit1dCloud(npnt=9, ncp=7) -> status=0, numiter= 8, normf= 1.1748e-08, dotmin= 1.0000, nmin=1
fit1dCloud(npnt=9, ncp=7) -> status=0, numiter= 8, normf= 1.1329e-08, dotmin= 1.0000, nmin=1
generateFits(1D), CPU= 0.49 sec
iface= 1 npnt= 102
nfit= 69 ( 67%)
non-planar (fitting) ipnt=1, prod= -0.11418
extracting south control points from iedge= 1
extracting east control points from iedge= 4
extracting north control points from iedge= 2
extracting west control points from iedge= 3
iface= 2 npnt= 102
nfit= 69 ( 67%)
non-planar (fitting) ipnt=1, prod= -0.04089
extracting south control points from iedge= -1
extracting east control points from iedge= 5
extracting north control points from iedge= -2
extracting west control points from iedge= 6
iface= 3 npnt= 512
nfit= 255 ( 49%)
iface= 4 npnt= 135
nfit= 94 ( 69%)
iface= 5 npnt= 510
nfit= 240 ( 47%)
iface= 6 npnt= 256
nfit= 256 (100%)
iface= 7 npnt= 251
nfit= 251 (100%)
iface= 8 npnt= 102
nfit= 69 ( 67%)
non-planar (fitting) ipnt=1, prod= 0.08379
extracting south control points from iedge= -10
extracting east control points from iedge= 24
extracting north control points from iedge= -18
extracting west control points from iedge= 23
iface= 9 npnt= 102
nfit= 69 ( 67%)
non-planar (fitting) ipnt=1, prod= 0.05199
extracting south control points from iedge= -11
extracting east control points from iedge= -23
extracting north control points from iedge= -19
extracting west control points from iedge= -24
iface= 10 npnt= 131
nfit= 79 ( 60%)
ID 1f939ba80: is master
ID 1f939ba80: iface 6 has 256 fitting Points
ID 1f939ba80: iface 6 skipped
ID 1f939ba80: iface 3 has 255 fitting Points
ID 1f939ba80: iface 3 skipped
ID 1f939ba80: iface 7 has 251 fitting Points
ID 1f939ba80: iface 7 skipped
ID 1f939ba80: iface 5 has 240 fitting Points
ID 1f939ba80: iface 5 skipped
ID 1f939ba80: iface 4 has 94 fitting Points
ID 1f939ba80: iface 4 skipped
ID 1f939ba80: iface 10 has 79 fitting Points
ID 1f939ba80: iface 10 skipped
ID 1f939ba80: iface 1 has 69 fitting Points
ID 16dddf000: start thread
ID 16dddf000: iface 2 has 69 fitting Points
ID 16dddf000: iface 2 complete with status=0, numiter= 9, normf= 3.6224e-04, dotmin= 0.7828, nmin= 1, npierce= 0
ID 16dddf000: iface 8 has 69 fitting Points
ID 1f939ba80: iface 1 complete with status=0, numiter= 10, normf= 3.7316e-04, dotmin= 0.7824, nmin= 1, npierce= 0
ID 1f939ba80: iface 9 has 69 fitting Points
ID 16dddf000: iface 8 complete with status=0, numiter= 9, normf= 3.3176e-04, dotmin= 0.7828, nmin= 1, npierce= 0
ID 16dddf000: stop thread
ID 1f939ba80: iface 9 complete with status=0, numiter= 10, normf= 3.4364e-04, dotmin= 0.7824, nmin= 1, npierce= 0
generateFits(2D), CPU= 0.33 sec
inode= 1, nedg= 3, xyz= 3.53109 1.00000 -0.88397
inode= 2, nedg= 3, xyz= 3.03109 1.00000 -1.75000
inode= 3, nedg= 3, xyz= 2.16506 1.00000 -1.25000
inode= 4, nedg= 3, xyz= 2.66506 1.00000 -0.38397
inode= 5, nedg= 3, xyz= 3.96410 0.00000 -1.13397
inode= 6, nedg= 3, xyz= 3.96410 2.00000 -1.13397
inode= 7, nedg= 3, xyz= 0.50000 2.00000 0.86603
inode= 8, nedg= 3, xyz= 0.50000 0.00000 0.86603
inode= 9, nedg= 3, xyz= 0.93301 1.00000 0.61603
inode= 10, nedg= 3, xyz= 1.79904 1.00000 0.11603
inode= 11, nedg= 3, xyz= 3.46410 0.00000 -2.00000
inode= 12, nedg= 3, xyz= 3.46410 2.00000 -2.00000
inode= 13, nedg= 3, xyz= 0.00000 2.00000 0.00000
inode= 14, nedg= 3, xyz= 0.00000 0.00000 0.00000
inode= 15, nedg= 3, xyz= 1.29904 1.00000 -0.75000
inode= 16, nedg= 3, xyz= 0.43301 1.00000 -0.25000
iedge= 1, ibeg= 1, iend= 2, ileft= 1, irite= 2
iedge= 2, ibeg= 3, iend= 4, ileft= 1, irite= 2
iedge= 3, ibeg= 4, iend= 1, ileft= 1, irite= 3
iedge= 4, ibeg= 2, iend= 3, ileft= 1, irite= 5
iedge= 5, ibeg= 1, iend= 4, ileft= 2, irite= 3
iedge= 6, ibeg= 3, iend= 2, ileft= 2, irite= 5
iedge= 7, ibeg= 5, iend= 6, ileft= 3, irite= 4
iedge= 8, ibeg= 6, iend= 7, ileft= 3, irite= 6
iedge= 9, ibeg= 8, iend= 5, ileft= 3, irite= 7
iedge= 10, ibeg= 9, iend= 10, ileft= 3, irite= 8
iedge= 11, ibeg= 10, iend= 9, ileft= 3, irite= 9
iedge= 12, ibeg= 7, iend= 8, ileft= 3, irite= 10
iedge= 13, ibeg= 11, iend= 12, ileft= 4, irite= 5
iedge= 14, ibeg= 12, iend= 6, ileft= 4, irite= 6
iedge= 15, ibeg= 5, iend= 11, ileft= 4, irite= 7
iedge= 16, ibeg= 13, iend= 12, ileft= 5, irite= 6
iedge= 17, ibeg= 11, iend= 14, ileft= 5, irite= 7
iedge= 18, ibeg= 15, iend= 16, ileft= 5, irite= 8
iedge= 19, ibeg= 16, iend= 15, ileft= 5, irite= 9
iedge= 20, ibeg= 14, iend= 13, ileft= 5, irite= 10
iedge= 21, ibeg= 13, iend= 7, ileft= 6, irite= 10
iedge= 22, ibeg= 8, iend= 14, ileft= 7, irite= 10
iedge= 23, ibeg= 15, iend= 10, ileft= 8, irite= 9
iedge= 24, ibeg= 9, iend= 16, ileft= 8, irite= 9
iface= 1, icol= 1, nedg= 4, nlup= 1
edg= 1 4 2 3
lup= 0
iface= 2, icol= 2, nedg= 4, nlup= 1
edg= -1 5 -2 6
lup= 0
iface= 3, icol= 3, nedg= 8, nlup= 3
edg= 7 8 12 9 -3 -5 11 10
lup= 0 4 6
iface= 4, icol= 4, nedg= 4, nlup= 1
edg= -7 15 13 14
lup= 0
iface= 5, icol= 5, nedg= 8, nlup= 3
edg= -13 17 20 16 19 18 -4 -6
lup= 0 4 6
iface= 6, icol= 6, nedg= 4, nlup= 1
edg= -8 -14 -16 21
lup= 0
iface= 7, icol= 7, nedg= 4, nlup= 1
edg= -9 22 -17 -15
lup= 0
iface= 8, icol= 8, nedg= 4, nlup= 1
edg= -10 24 -18 23
lup= 0
iface= 9, icol= 9, nedg= 4, nlup= 1
edg= -11 -23 -19 -24
lup= 0
iface= 10, icol= 10, nedg= 4, nlup= 1
edg= -12 -21 -20 -22
lup= 0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
non-planar
iface=1, nedg=4, nlup=1
EG_makeGeometry(SURFACE) -> status=0
EG_makeGeometry(PCURVE 0) -> status=0
EG_makeGeometry(PCURVE 1) -> status=0
EG_makeGeometry(PCURVE 2) -> status=0
EG_makeGeometry(PCURVE 3) -> status=0
EG_makeTopology(LOOP) -> status=0
EG_makeTopology(FACE) -> status=0
iface= 1 nfit= 69 rms= 7.459e-04
npnt= 102 rms= 7.093e-04
non-planar
iface=2, nedg=4, nlup=1
EG_makeGeometry(SURFACE) -> status=0
EG_makeGeometry(PCURVE 0) -> status=0
EG_makeGeometry(PCURVE 1) -> status=0
EG_makeGeometry(PCURVE 2) -> status=0
EG_makeGeometry(PCURVE 3) -> status=0
EG_makeTopology(LOOP) -> status=0
EG_makeTopology(FACE) -> status=0
iface= 2 nfit= 69 rms= 7.254e-04
npnt= 102 rms= 7.177e-04
planar
iface= 3 is planar, so accuracy is not computed
planar
iface= 4 is planar, so accuracy is not computed
planar
iface= 5 is planar, so accuracy is not computed
planar
iface= 6 is planar, so accuracy is not computed
planar
iface= 7 is planar, so accuracy is not computed
non-planar
iface=8, nedg=4, nlup=1
EG_makeGeometry(SURFACE) -> status=0
EG_makeGeometry(PCURVE 0) -> status=0
EG_makeGeometry(PCURVE 1) -> status=0
EG_makeGeometry(PCURVE 2) -> status=0
EG_makeGeometry(PCURVE 3) -> status=0
EG_makeTopology(LOOP) -> status=0
EG_makeTopology(FACE) -> status=0
iface= 8 nfit= 69 rms= 6.631e-04
npnt= 102 rms= 7.177e-04
non-planar
iface=9, nedg=4, nlup=1
EG_makeGeometry(SURFACE) -> status=0
EG_makeGeometry(PCURVE 0) -> status=0
EG_makeGeometry(PCURVE 1) -> status=0
EG_makeGeometry(PCURVE 2) -> status=0
EG_makeGeometry(PCURVE 3) -> status=0
EG_makeTopology(LOOP) -> status=0
EG_makeTopology(FACE) -> status=0
iface= 9 nfit= 69 rms= 6.855e-04
npnt= 102 rms= 7.093e-04
planar
iface= 10 is planar, so accuracy is not computed
before makeTopology(SHELL, nfaces=10, closed=1)
File "../../OpenCSM/trunk/data/Slugs/holes_1.egads" is being written
==> Closing input journal file
real 0m1.440s
user 0m1.420s
sys 0m0.017s
+++ set +x
holes_0 passed (as expected)
+++ /Users/jenkins/workspace/ESP_UndefinedCaps/7.4/OpenCSM/data/Slugs/DARWINM1/ESP/DARWINM1/bin/serveESP ../../OpenCSM/trunk/data/Slugs/holes_1 -outLevel 0 -batch -verify
==> serveESP completed successfully
real 0m0.500s
user 0m0.679s
sys 0m0.012s
+++ set +x
holes_1 passed (as expected)
--------------------------------------------------------------------------------------------------
( 13 )
+++ /Users/jenkins/workspace/ESP_UndefinedCaps/7.4/OpenCSM/data/Slugs/DARWINM1/ESP/DARWINM1/bin/Slugs ../../OpenCSM/trunk/data/Slugs/pieslice_0 -outLevel 0 -batch -jrnl ../../OpenCSM/trunk/data/Slugs/pieslice_0.mod.jrnl
.
After reading: npnt = 1529
ntri = 3054
==> Opening input journal file "../../OpenCSM/trunk/data/Slugs/pieslice_0.mod.jrnl"
Face 1
...at beginning
Edge 1, npnt= 33, ibeg= 1, iend= 2
Edge 2, npnt= 33, ibeg= 3, iend= 4
Edge 3, npnt= 17, ibeg= 2, iend= 3
Edge 4, npnt= 17, ibeg= 4, iend= 1
...after sorting into Loops
Loop 0 (0:3)
Edge 1, npnt= 33, ibeg= 1, iend= 2
Edge 3, npnt= 17, ibeg= 2, iend= 3
Edge 2, npnt= 33, ibeg= 3, iend= 4
Edge 4, npnt= 17, ibeg= 4, iend= 1
Face 2
...at beginning
Edge -1, npnt= 33, iend= 2, ibeg= 1
Edge 5, npnt= 33, ibeg= 5, iend= 6
Edge 6, npnt= 17, ibeg= 6, iend= 2
Edge 7, npnt= 17, ibeg= 1, iend= 5
...after sorting into Loops
Loop 0 (0:3)
Edge -1, npnt= 33, iend= 2, ibeg= 1
Edge 7, npnt= 17, ibeg= 1, iend= 5
Edge 5, npnt= 33, ibeg= 5, iend= 6
Edge 6, npnt= 17, ibeg= 6, iend= 2
Face 3
...at beginning
Edge -2, npnt= 33, iend= 4, ibeg= 3
Edge -5, npnt= 33, iend= 6, ibeg= 5
Edge 8, npnt= 17, ibeg= 3, iend= 6
Edge 9, npnt= 17, ibeg= 5, iend= 4
...after sorting into Loops
Loop 0 (0:3)
Edge -2, npnt= 33, iend= 4, ibeg= 3
Edge 8, npnt= 17, ibeg= 3, iend= 6
Edge -5, npnt= 33, iend= 6, ibeg= 5
Edge 9, npnt= 17, ibeg= 5, iend= 4
Face 4
...at beginning
Edge -3, npnt= 17, iend= 3, ibeg= 2
Edge -6, npnt= 17, iend= 2, ibeg= 6
Edge -8, npnt= 17, iend= 6, ibeg= 3
...after sorting into Loops
Loop 0 (0:2)
Edge -3, npnt= 17, iend= 3, ibeg= 2
Edge -6, npnt= 17, iend= 2, ibeg= 6
Edge -8, npnt= 17, iend= 6, ibeg= 3
Face 5
...at beginning
Edge -4, npnt= 17, iend= 1, ibeg= 4
Edge -7, npnt= 17, iend= 5, ibeg= 1
Edge -9, npnt= 17, iend= 4, ibeg= 5
...after sorting into Loops
Loop 0 (0:2)
Edge -4, npnt= 17, iend= 1, ibeg= 4
Edge -9, npnt= 17, iend= 4, ibeg= 5
Edge -7, npnt= 17, iend= 5, ibeg= 1
fit1dCloud(npnt=33, ncp=9) -> status=0, numiter= 9, normf= 3.7016e-07, dotmin= nan, nmin=4
fit1dCloud(npnt=33, ncp=9) -> status=0, numiter= 9, normf= 3.3503e-07, dotmin= nan, nmin=4
fit1dCloud(npnt=17, ncp=9) -> status=0, numiter=231, normf= 9.8898e-05, dotmin= 1.0000, nmin=2
fit1dCloud(npnt=17, ncp=9) -> status=0, numiter=231, normf= 9.8899e-05, dotmin= 1.0000, nmin=2
fit1dCloud(npnt=33, ncp=9) -> status=0, numiter= 9, normf= 3.3503e-07, dotmin= nan, nmin=4
fit1dCloud(npnt=17, ncp=9) -> status=0, numiter=231, normf= 9.8898e-05, dotmin= 1.0000, nmin=2
fit1dCloud(npnt=17, ncp=9) -> status=0, numiter=231, normf= 9.8899e-05, dotmin= 1.0000, nmin=2
fit1dCloud(npnt=17, ncp=9) -> status=0, numiter=393, normf= 1.2923e-04, dotmin= 0.9825, nmin=2
fit1dCloud(npnt=17, ncp=9) -> status=0, numiter=393, normf= 1.2923e-04, dotmin= 0.9825, nmin=2
generateFits(1D), CPU= 0.18 sec
iface= 1 npnt= 496
nfit= 287 ( 57%)
iface= 2 npnt= 500
nfit= 287 ( 57%)
iface= 3 npnt= 480
nfit= 291 ( 60%)
non-planar (fitting) ipnt=1, prod= 0.00344
extracting south control points from iedge= -2
extracting east control points from iedge= 8
extracting north control points from iedge= -5
extracting west control points from iedge= 9
iface= 4 npnt= 124
nfit= 75 ( 60%)
non-planar (fitting) ipnt=1, prod= -0.00508
extracting south control points from iedge= -3
extracting east control points from iedge= -6
extracting north control points from iedge= -8
copying west control points from degen 0.9239 -0.3827 0.1854
iface= 5 npnt= 124
nfit= 75 ( 60%)
non-planar (fitting) ipnt=1, prod= 0.00231
extracting south control points from iedge= -4
extracting east control points from iedge= -9
extracting north control points from iedge= -7
copying west control points from degen 0.0000 0.0000 1.9000
ID 1f939ba80: is master
ID 1f939ba80: iface 3 has 291 fitting Points
ID 16b36b000: start thread
ID 16b36b000: iface 1 has 287 fitting Points
ID 16b36b000: iface 1 skipped
ID 16b36b000: iface 2 has 287 fitting Points
ID 16b36b000: iface 2 skipped
ID 16b36b000: iface 4 has 75 fitting Points
ID 16b36b000: iface 4 complete with status=0, numiter= 11, normf= 5.6673e-05, dotmin= 0.9837, nmin= 0, npierce= 42
ID 16b36b000: iface 5 has 75 fitting Points
ID 1f939ba80: iface 3 complete with status=0, numiter= 7, normf= 6.1262e-05, dotmin= 0.9854, nmin= 1, npierce= 0
ID 16b36b000: iface 5 complete with status=0, numiter= 23, normf= 1.1991e-04, dotmin= 0.9842, nmin= 0, npierce= 42
ID 16b36b000: stop thread
generateFits(2D), CPU= 2.08 sec
inode= 1, nedg= 3, xyz= 0.00000 0.00000 1.90000
inode= 2, nedg= 3, xyz= 0.00000 0.00000 0.10000
inode= 3, nedg= 3, xyz= 0.92388 -0.38268 0.18541
inode= 4, nedg= 3, xyz= 0.92388 -0.38268 1.81459
inode= 5, nedg= 3, xyz= 0.92388 0.38268 1.81459
inode= 6, nedg= 3, xyz= 0.92388 0.38268 0.18541
iedge= 1, ibeg= 1, iend= 2, ileft= 1, irite= 2
iedge= 2, ibeg= 3, iend= 4, ileft= 1, irite= 3
iedge= 3, ibeg= 2, iend= 3, ileft= 1, irite= 4
iedge= 4, ibeg= 4, iend= 1, ileft= 1, irite= 5
iedge= 5, ibeg= 5, iend= 6, ileft= 2, irite= 3
iedge= 6, ibeg= 6, iend= 2, ileft= 2, irite= 4
iedge= 7, ibeg= 1, iend= 5, ileft= 2, irite= 5
iedge= 8, ibeg= 3, iend= 6, ileft= 3, irite= 4
iedge= 9, ibeg= 5, iend= 4, ileft= 3, irite= 5
iface= 1, icol= 1, nedg= 4, nlup= 1
edg= 1 3 2 4
lup= 0
iface= 2, icol= 2, nedg= 4, nlup= 1
edg= -1 7 5 6
lup= 0
iface= 3, icol= 3, nedg= 4, nlup= 1
edg= -2 8 -5 9
lup= 0
iface= 4, icol= 4, nedg= 3, nlup= 1
edg= -3 -6 -8
lup= 0
iface= 5, icol= 5, nedg= 3, nlup= 1
edg= -4 -9 -7
lup= 0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
planar
iface= 1 is planar, so accuracy is not computed
planar
iface= 2 is planar, so accuracy is not computed
non-planar
iface=3, nedg=4, nlup=1
EG_makeGeometry(SURFACE) -> status=0
EG_makeGeometry(PCURVE 0) -> status=0
EG_makeGeometry(PCURVE 1) -> status=0
EG_makeGeometry(PCURVE 2) -> status=0
EG_makeGeometry(PCURVE 3) -> status=0
EG_makeTopology(LOOP) -> status=0
EG_makeTopology(FACE) -> status=0
iface= 3 nfit= 291 rms= 1.139e-04
npnt= 480 rms= 1.142e-04
non-planar
iface=4, nedg=3, nlup=1
EG_makeGeometry(SURFACE) -> status=0
EG_makeGeometry(PCURVE 0) -> status=0
EG_makeGeometry(PCURVE 1) -> status=0
EG_makeGeometry(PCURVE 2) -> status=0
EG_makeTopology(DEGEN 3) -> status=0
EG_makeGeometry(PCURVE 3) -> status=0
EG_makeTopology(LOOP) -> status=0
EG_makeTopology(FACE) -> status=0
iface= 4 nfit= 75 rms= 1.031e-04
npnt= 123 rms= 9.781e-05
non-planar
iface=5, nedg=3, nlup=1
EG_makeGeometry(SURFACE) -> status=0
EG_makeGeometry(PCURVE 0) -> status=0
EG_makeGeometry(PCURVE 1) -> status=0
EG_makeGeometry(PCURVE 2) -> status=0
EG_makeTopology(DEGEN 3) -> status=0
EG_makeGeometry(PCURVE 3) -> status=0
EG_makeTopology(LOOP) -> status=0
EG_makeTopology(FACE) -> status=0
iface= 5 nfit= 75 rms= 1.121e-04
npnt= 123 rms= 1.034e-04
before makeTopology(SHELL, nfaces=5, closed=1)
File "../../OpenCSM/trunk/data/Slugs/pieslice_1.egads" is being written
==> Closing input journal file
real 0m2.749s
user 0m3.392s
sys 0m0.023s
+++ set +x
pieslice_0 passed (as expected)
+++ /Users/jenkins/workspace/ESP_UndefinedCaps/7.4/OpenCSM/data/Slugs/DARWINM1/ESP/DARWINM1/bin/serveESP ../../OpenCSM/trunk/data/Slugs/pieslice_1 -outLevel 0 -batch -verify
==> serveESP completed successfully
real 0m0.419s
user 0m0.463s
sys 0m0.010s
+++ set +x
pieslice_1 passed (as expected)
--------------------------------------------------------------------------------------------------
( 14 )
+++ /Users/jenkins/workspace/ESP_UndefinedCaps/7.4/OpenCSM/data/Slugs/DARWINM1/ESP/DARWINM1/bin/Slugs ../../OpenCSM/trunk/data/Slugs/sphere_0 -outLevel 0 -batch -jrnl ../../OpenCSM/trunk/data/Slugs/sphere_0.mod.jrnl
.
After reading: npnt = 2631
ntri = 5258
==> Opening input journal file "../../OpenCSM/trunk/data/Slugs/sphere_0.mod.jrnl"
starting dijkstra passes . done
starting dijkstra passes . done
starting dijkstra passes . done
starting dijkstra passes . done
Face 1
...at beginning
Edge 1, npnt= 33, ibeg= 1, iend= 2
Edge 2, npnt= 33, ibeg= 2, iend= 3
Edge 3, npnt= 33, ibeg= 3, iend= 1
...after sorting into Loops
Loop 0 (0:2)
Edge 1, npnt= 33, ibeg= 1, iend= 2
Edge 2, npnt= 33, ibeg= 2, iend= 3
Edge 3, npnt= 33, ibeg= 3, iend= 1
Face 2
...at beginning
Edge -1, npnt= 33, iend= 2, ibeg= 1
Edge 4, npnt= 33, ibeg= 4, iend= 2
Edge 5, npnt= 33, ibeg= 1, iend= 4
...after sorting into Loops
Loop 0 (0:2)
Edge -1, npnt= 33, iend= 2, ibeg= 1
Edge 5, npnt= 33, ibeg= 1, iend= 4
Edge 4, npnt= 33, ibeg= 4, iend= 2
Face 3
...at beginning
Edge -2, npnt= 33, iend= 3, ibeg= 2
Edge -4, npnt= 33, iend= 2, ibeg= 4
Edge 6, npnt= 33, ibeg= 4, iend= 3
...after sorting into Loops
Loop 0 (0:2)
Edge -2, npnt= 33, iend= 3, ibeg= 2
Edge -4, npnt= 33, iend= 2, ibeg= 4
Edge 6, npnt= 33, ibeg= 4, iend= 3
Face 4
...at beginning
Edge -3, npnt= 33, iend= 1, ibeg= 3
Edge -5, npnt= 33, iend= 4, ibeg= 1
Edge -6, npnt= 33, iend= 3, ibeg= 4
...after sorting into Loops
Loop 0 (0:2)
Edge -3, npnt= 33, iend= 1, ibeg= 3
Edge -6, npnt= 33, iend= 3, ibeg= 4
Edge -5, npnt= 33, iend= 4, ibeg= 1
fit1dCloud(npnt=33, ncp=9) -> status=0, numiter=476, normf= 2.4424e-04, dotmin= 0.9622, nmin=4
fit1dCloud(npnt=33, ncp=9) -> status=0, numiter=476, normf= 2.4422e-04, dotmin= 0.9622, nmin=4
fit1dCloud(npnt=33, ncp=9) -> status=0, numiter=476, normf= 2.4422e-04, dotmin= 0.9622, nmin=4
fit1dCloud(npnt=33, ncp=9) -> status=0, numiter=476, normf= 2.4422e-04, dotmin= 0.9622, nmin=4
fit1dCloud(npnt=33, ncp=9) -> status=0, numiter=476, normf= 2.4422e-04, dotmin= 0.9622, nmin=4
fit1dCloud(npnt=33, ncp=9) -> status=0, numiter= 9, normf= 4.1129e-07, dotmin= 1.0000, nmin=4
generateFits(1D), CPU= 0.49 sec
iface= 1 npnt= 1057
nfit= 545 ( 51%)
non-planar (fitting) ipnt=1, prod= -0.02701
extracting south control points from iedge= 1
extracting east control points from iedge= 2
extracting north control points from iedge= 3
copying west control points from degen 0.0000 -0.0000 1.0000
iface= 2 npnt= 823
nfit= 452 ( 54%)
non-planar (fitting) ipnt=1, prod= -0.02772
extracting south control points from iedge= -1
extracting east control points from iedge= 5
extracting north control points from iedge= 4
copying west control points from degen -1.0000 0.0000 0.0000
iface= 3 npnt= 470
nfit= 253 ( 53%)
iface= 4 npnt= 475
nfit= 278 ( 58%)
ID 1f939ba80: is master
ID 1f939ba80: iface 1 has 545 fitting Points
ID 16dcdb000: start thread
ID 16dcdb000: iface 2 has 452 fitting Points
ID 16dcdb000: iface 2 complete with status=0, numiter=100, normf= 3.7780e-04, dotmin= nan, nmin= 1, npierce= 42
ID 16dcdb000: iface 4 has 278 fitting Points
ID 16dcdb000: iface 4 skipped
ID 16dcdb000: iface 3 has 253 fitting Points
ID 16dcdb000: iface 3 skipped
ID 16dcdb000: stop thread
ID 1f939ba80: iface 1 complete with status=0, numiter=100, normf= 3.3480e-04, dotmin= nan, nmin= 5, npierce= 42
generateFits(2D), CPU= 40.09 sec
inode= 1, nedg= 3, xyz= 0.00000 -0.00000 1.00000
inode= 2, nedg= 3, xyz= -1.00000 0.00000 -0.00000
inode= 3, nedg= 3, xyz= -0.00000 -1.00000 0.00000
inode= 4, nedg= 3, xyz= 0.00000 1.00000 0.00000
iedge= 1, ibeg= 1, iend= 2, ileft= 1, irite= 2
iedge= 2, ibeg= 2, iend= 3, ileft= 1, irite= 3
iedge= 3, ibeg= 3, iend= 1, ileft= 1, irite= 4
iedge= 4, ibeg= 4, iend= 2, ileft= 2, irite= 3
iedge= 5, ibeg= 1, iend= 4, ileft= 2, irite= 4
iedge= 6, ibeg= 4, iend= 3, ileft= 3, irite= 4
iface= 1, icol= 1, nedg= 3, nlup= 1
edg= 1 2 3
lup= 0
iface= 2, icol= 2, nedg= 3, nlup= 1
edg= -1 5 4
lup= 0
iface= 3, icol= 3, nedg= 3, nlup= 1
edg= -2 -4 6
lup= 0
iface= 4, icol= 4, nedg= 3, nlup= 1
edg= -3 -6 -5
lup= 0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
non-planar
iface=1, nedg=3, nlup=1
EG_makeGeometry(SURFACE) -> status=0
EG_makeGeometry(PCURVE 0) -> status=0
EG_makeGeometry(PCURVE 1) -> status=0
EG_makeGeometry(PCURVE 2) -> status=0
EG_makeTopology(DEGEN 3) -> status=0
EG_makeGeometry(PCURVE 3) -> status=0
EG_makeTopology(LOOP) -> status=0
EG_makeTopology(FACE) -> status=0
iface= 1 nfit= 545 rms= 4.941e-04
npnt= 1056 rms= 5.221e-04
non-planar
iface=2, nedg=3, nlup=1
EG_makeGeometry(SURFACE) -> status=0
EG_makeGeometry(PCURVE 0) -> status=0
EG_makeGeometry(PCURVE 1) -> status=0
EG_makeGeometry(PCURVE 2) -> status=0
EG_makeTopology(DEGEN 3) -> status=0
EG_makeGeometry(PCURVE 3) -> status=0
EG_makeTopology(LOOP) -> status=0
EG_makeTopology(FACE) -> status=0
iface= 2 nfit= 452 rms= 5.483e-04
npnt= 822 rms= 5.860e-04
planar
iface= 3 is planar, so accuracy is not computed
planar
iface= 4 is planar, so accuracy is not computed
before makeTopology(SHELL, nfaces=4, closed=1)
File "../../OpenCSM/trunk/data/Slugs/sphere_1.egads" is being written
==> Closing input journal file
real 0m28.078s
user 0m43.081s
sys 0m0.180s
+++ set +x
sphere_0 passed (as expected)
+++ /Users/jenkins/workspace/ESP_UndefinedCaps/7.4/OpenCSM/data/Slugs/DARWINM1/ESP/DARWINM1/bin/serveESP ../../OpenCSM/trunk/data/Slugs/sphere_1 -outLevel 0 -batch -verify
==> serveESP completed successfully
real 0m0.257s
user 0m0.296s
sys 0m0.012s
+++ set +x
sphere_1 passed (as expected)
--------------------------------------------------------------------------------------------------
( 15 )
+++ /Users/jenkins/workspace/ESP_UndefinedCaps/7.4/OpenCSM/data/Slugs/DARWINM1/ESP/DARWINM1/bin/Slugs ../../OpenCSM/trunk/data/Slugs/torus_0 -outLevel 0 -batch -jrnl ../../OpenCSM/trunk/data/Slugs/torus_0.mod.jrnl
...
After reading: npnt = 13247
ntri = 26494
==> Opening input journal file "../../OpenCSM/trunk/data/Slugs/torus_0.mod.jrnl"
starting dijkstra passes . done
starting dijkstra passes . done
starting dijkstra passes . done
starting dijkstra passes . done
starting dijkstra passes . done
starting dijkstra passes . done
starting dijkstra passes . done
starting dijkstra passes . done
starting dijkstra passes . done
starting dijkstra passes . done
starting dijkstra passes . done
starting dijkstra passes . done
starting dijkstra passes . done
starting dijkstra passes . done
starting dijkstra passes . done
starting dijkstra passes . done
starting dijkstra passes . done
starting dijkstra passes . done
starting dijkstra passes . done
starting dijkstra passes . done
starting dijkstra passes . done
starting dijkstra passes . done
starting dijkstra passes . done
starting dijkstra passes . done
starting dijkstra passes . done
starting dijkstra passes . done
starting dijkstra passes . done
starting dijkstra passes . done
starting dijkstra passes . done
starting dijkstra passes . done
starting dijkstra passes . done
starting dijkstra passes . done
starting dijkstra passes . done
starting dijkstra passes . done
Face 1
...at beginning
Edge 1, npnt= 65, ibeg= 1, iend= 2
Edge 2, npnt= 65, ibeg= 3, iend= 4
Edge 3, npnt= 33, ibeg= 4, iend= 1
Edge 4, npnt= 33, ibeg= 2, iend= 3
...after sorting into Loops
Loop 0 (0:3)
Edge 1, npnt= 65, ibeg= 1, iend= 2
Edge 4, npnt= 33, ibeg= 2, iend= 3
Edge 2, npnt= 65, ibeg= 3, iend= 4
Edge 3, npnt= 33, ibeg= 4, iend= 1
Face 2
...at beginning
Edge 5, npnt= 65, ibeg= 5, iend= 6
Edge 6, npnt= 65, ibeg= 7, iend= 8
Edge 7, npnt= 33, ibeg= 8, iend= 5
Edge 8, npnt= 33, ibeg= 6, iend= 7
...after sorting into Loops
Loop 0 (0:3)
Edge 5, npnt= 65, ibeg= 5, iend= 6
Edge 8, npnt= 33, ibeg= 6, iend= 7
Edge 6, npnt= 65, ibeg= 7, iend= 8
Edge 7, npnt= 33, ibeg= 8, iend= 5
Face 3
...at beginning
Edge -1, npnt= 65, iend= 2, ibeg= 1
Edge -5, npnt= 65, iend= 6, ibeg= 5
Edge 9, npnt= 33, ibeg= 1, iend= 6
Edge 10, npnt= 33, ibeg= 5, iend= 2
...after sorting into Loops
Loop 0 (0:3)
Edge -1, npnt= 65, iend= 2, ibeg= 1
Edge 9, npnt= 33, ibeg= 1, iend= 6
Edge -5, npnt= 65, iend= 6, ibeg= 5
Edge 10, npnt= 33, ibeg= 5, iend= 2
Face 4
...at beginning
Edge -2, npnt= 65, iend= 4, ibeg= 3
Edge -6, npnt= 65, iend= 8, ibeg= 7
Edge 11, npnt= 33, ibeg= 3, iend= 8
Edge 12, npnt= 33, ibeg= 7, iend= 4
...after sorting into Loops
Loop 0 (0:3)
Edge -2, npnt= 65, iend= 4, ibeg= 3
Edge 11, npnt= 33, ibeg= 3, iend= 8
Edge -6, npnt= 65, iend= 8, ibeg= 7
Edge 12, npnt= 33, ibeg= 7, iend= 4
Face 5
...at beginning
Edge -7, npnt= 33, iend= 5, ibeg= 8
Edge -8, npnt= 33, iend= 7, ibeg= 6
Edge 13, npnt= 65, ibeg= 8, iend= 7
Edge 14, npnt= 65, ibeg= 6, iend= 5
...after sorting into Loops
Loop 0 (0:3)
Edge -7, npnt= 33, iend= 5, ibeg= 8
Edge 13, npnt= 65, ibeg= 8, iend= 7
Edge -8, npnt= 33, iend= 7, ibeg= 6
Edge 14, npnt= 65, ibeg= 6, iend= 5
Face 6
...at beginning
Edge -11, npnt= 33, iend= 8, ibeg= 3
Edge -12, npnt= 33, iend= 4, ibeg= 7
Edge -13, npnt= 65, iend= 7, ibeg= 8
Edge 15, npnt= 65, ibeg= 3, iend= 4
...after sorting into Loops
Loop 0 (0:3)
Edge -11, npnt= 33, iend= 8, ibeg= 3
Edge 15, npnt= 65, ibeg= 3, iend= 4
Edge -12, npnt= 33, iend= 4, ibeg= 7
Edge -13, npnt= 65, iend= 7, ibeg= 8
Face 7
...at beginning
Edge -3, npnt= 33, iend= 1, ibeg= 4
Edge -4, npnt= 33, iend= 3, ibeg= 2
Edge -15, npnt= 65, iend= 4, ibeg= 3
Edge 16, npnt= 65, ibeg= 2, iend= 1
...after sorting into Loops
Loop 0 (0:3)
Edge -3, npnt= 33, iend= 1, ibeg= 4
Edge -15, npnt= 65, iend= 4, ibeg= 3
Edge -4, npnt= 33, iend= 3, ibeg= 2
Edge 16, npnt= 65, ibeg= 2, iend= 1
Face 8
...at beginning
Edge -9, npnt= 33, iend= 6, ibeg= 1
Edge -10, npnt= 33, iend= 2, ibeg= 5
Edge -14, npnt= 65, iend= 5, ibeg= 6
Edge -16, npnt= 65, iend= 1, ibeg= 2
...after sorting into Loops
Loop 0 (0:3)
Edge -9, npnt= 33, iend= 6, ibeg= 1
Edge -16, npnt= 65, iend= 1, ibeg= 2
Edge -10, npnt= 33, iend= 2, ibeg= 5
Edge -14, npnt= 65, iend= 5, ibeg= 6
fit1dCloud(npnt=65, ncp=9) -> status=0, numiter=670, normf= 1.7973e-04, dotmin= 0.8848, nmin=8
fit1dCloud(npnt=65, ncp=9) -> status=0, numiter=670, normf= 1.7975e-04, dotmin= 0.8848, nmin=8
fit1dCloud(npnt=33, ncp=9) -> status=0, numiter=476, normf= 3.6629e-04, dotmin= 0.9622, nmin=4
fit1dCloud(npnt=33, ncp=9) -> status=0, numiter=476, normf= 1.2210e-04, dotmin= 0.9622, nmin=4
fit1dCloud(npnt=65, ncp=9) -> status=0, numiter=669, normf= 1.7987e-04, dotmin= 0.8847, nmin=8
fit1dCloud(npnt=65, ncp=9) -> status=0, numiter=670, normf= 1.7973e-04, dotmin= 0.8848, nmin=8
fit1dCloud(npnt=33, ncp=9) -> status=0, numiter=476, normf= 1.2210e-04, dotmin= 0.9622, nmin=4
fit1dCloud(npnt=33, ncp=9) -> status=0, numiter=476, normf= 3.6629e-04, dotmin= 0.9622, nmin=4
fit1dCloud(npnt=33, ncp=9) -> status=0, numiter=476, normf= 3.6629e-04, dotmin= 0.9622, nmin=4
fit1dCloud(npnt=33, ncp=9) -> status=0, numiter=476, normf= 1.2210e-04, dotmin= 0.9622, nmin=4
fit1dCloud(npnt=33, ncp=9) -> status=0, numiter=476, normf= 1.2210e-04, dotmin= 0.9622, nmin=4
fit1dCloud(npnt=33, ncp=9) -> status=0, numiter=476, normf= 3.6629e-04, dotmin= 0.9622, nmin=4
fit1dCloud(npnt=65, ncp=9) -> status=0, numiter=670, normf= 1.7973e-04, dotmin= 0.8848, nmin=8
fit1dCloud(npnt=65, ncp=9) -> status=0, numiter=669, normf= 1.7987e-04, dotmin= 0.8847, nmin=8
fit1dCloud(npnt=65, ncp=9) -> status=0, numiter=670, normf= 1.7975e-04, dotmin= 0.8848, nmin=8
fit1dCloud(npnt=65, ncp=9) -> status=0, numiter=670, normf= 1.7973e-04, dotmin= 0.8848, nmin=8
generateFits(1D), CPU= 2.56 sec
iface= 1 npnt= 1759
nfit= 881 ( 50%)
non-planar (fitting) ipnt=1, prod= 0.02082
extracting south control points from iedge= 1
extracting east control points from iedge= 4
extracting north control points from iedge= 2
extracting west control points from iedge= 3
iface= 2 npnt= 1750
nfit= 908 ( 51%)
non-planar (fitting) ipnt=1, prod= -0.01990
extracting south control points from iedge= 5
extracting east control points from iedge= 8
extracting north control points from iedge= 6
extracting west control points from iedge= 7
iface= 3 npnt= 1769
nfit= 904 ( 51%)
non-planar (fitting) ipnt=1, prod= 0.00459
extracting south control points from iedge= -1
extracting east control points from iedge= 9
extracting north control points from iedge= -5
extracting west control points from iedge= 10
iface= 4 npnt= 1746
nfit= 919 ( 52%)
non-planar (fitting) ipnt=1, prod= 0.00688
extracting south control points from iedge= -2
extracting east control points from iedge= 11
extracting north control points from iedge= -6
extracting west control points from iedge= 12
iface= 5 npnt= 1748
nfit= 890 ( 50%)
non-planar (fitting) ipnt=1, prod= 0.00967
extracting south control points from iedge= -7
extracting east control points from iedge= 13
extracting north control points from iedge= -8
extracting west control points from iedge= 14
iface= 6 npnt= 1757
nfit= 872 ( 49%)
non-planar (fitting) ipnt=1, prod= -0.00612
extracting south control points from iedge= -11
extracting east control points from iedge= 15
extracting north control points from iedge= -12
extracting west control points from iedge= -13
iface= 7 npnt= 1763
nfit= 900 ( 51%)
non-planar (fitting) ipnt=2, prod= 0.00274
extracting south control points from iedge= -3
extracting east control points from iedge= -15
extracting north control points from iedge= -4
extracting west control points from iedge= 16
iface= 8 npnt= 1731
nfit= 879 ( 50%)
non-planar (fitting) ipnt=1, prod= -0.00667
extracting south control points from iedge= -9
extracting east control points from iedge= -16
extracting north control points from iedge= -10
extracting west control points from iedge= -14
ID 1f939ba80: is master
ID 1f939ba80: iface 4 has 919 fitting Points
ID 16f6f3000: start thread
ID 16f6f3000: iface 2 has 908 fitting Points
ID 16f6f3000: iface 2 complete with status=0, numiter=100, normf= 2.9988e-04, dotmin= 0.8867, nmin= 9, npierce= 0
ID 16f6f3000: iface 3 has 904 fitting Points
ID 1f939ba80: iface 4 complete with status=0, numiter=100, normf= 2.9139e-04, dotmin= 0.8870, nmin= 11, npierce= 0
ID 1f939ba80: iface 7 has 900 fitting Points
ID 16f6f3000: iface 3 complete with status=0, numiter=100, normf= 3.0012e-04, dotmin= 0.8865, nmin= 10, npierce= 0
ID 16f6f3000: iface 5 has 890 fitting Points
ID 1f939ba80: iface 7 complete with status=0, numiter=100, normf= 2.9479e-04, dotmin= 0.8865, nmin= 11, npierce= 0
ID 1f939ba80: iface 1 has 881 fitting Points
ID 16f6f3000: iface 5 complete with status=0, numiter=100, normf= 2.9820e-04, dotmin= 0.8860, nmin= 10, npierce= 0
ID 16f6f3000: iface 8 has 879 fitting Points
ID 1f939ba80: iface 1 complete with status=0, numiter=100, normf= 2.9594e-04, dotmin= 0.8856, nmin= 11, npierce= 0
ID 1f939ba80: iface 6 has 872 fitting Points
ID 16f6f3000: iface 8 complete with status=0, numiter=100, normf= 3.0112e-04, dotmin= 0.8860, nmin= 7, npierce= 0
ID 16f6f3000: stop thread
ID 1f939ba80: iface 6 complete with status=0, numiter=100, normf= 3.0408e-04, dotmin= 0.8866, nmin= 8, npierce= 0
generateFits(2D), CPU= 284.60 sec
inode= 1, nedg= 4, xyz= -1.50000 -0.00000 -0.00000
inode= 2, nedg= 4, xyz= -0.50000 0.00000 -0.00000
inode= 3, nedg= 4, xyz= 0.00000 0.00000 -0.50000
inode= 4, nedg= 4, xyz= 0.00000 0.00000 -1.50000
inode= 5, nedg= 4, xyz= 0.00000 0.00000 0.50000
inode= 6, nedg= 4, xyz= -0.00000 -0.00000 1.50000
inode= 7, nedg= 4, xyz= 1.50000 -0.00000 0.00000
inode= 8, nedg= 4, xyz= 0.50000 0.00000 0.00000
iedge= 1, ibeg= 1, iend= 2, ileft= 1, irite= 3
iedge= 2, ibeg= 3, iend= 4, ileft= 1, irite= 4
iedge= 3, ibeg= 4, iend= 1, ileft= 1, irite= 7
iedge= 4, ibeg= 2, iend= 3, ileft= 1, irite= 7
iedge= 5, ibeg= 5, iend= 6, ileft= 2, irite= 3
iedge= 6, ibeg= 7, iend= 8, ileft= 2, irite= 4
iedge= 7, ibeg= 8, iend= 5, ileft= 2, irite= 5
iedge= 8, ibeg= 6, iend= 7, ileft= 2, irite= 5
iedge= 9, ibeg= 1, iend= 6, ileft= 3, irite= 8
iedge= 10, ibeg= 5, iend= 2, ileft= 3, irite= 8
iedge= 11, ibeg= 3, iend= 8, ileft= 4, irite= 6
iedge= 12, ibeg= 7, iend= 4, ileft= 4, irite= 6
iedge= 13, ibeg= 8, iend= 7, ileft= 5, irite= 6
iedge= 14, ibeg= 6, iend= 5, ileft= 5, irite= 8
iedge= 15, ibeg= 3, iend= 4, ileft= 6, irite= 7
iedge= 16, ibeg= 2, iend= 1, ileft= 7, irite= 8
iface= 1, icol= 1, nedg= 4, nlup= 1
edg= 1 4 2 3
lup= 0
iface= 2, icol= 2, nedg= 4, nlup= 1
edg= 5 8 6 7
lup= 0
iface= 3, icol= 3, nedg= 4, nlup= 1
edg= -1 9 -5 10
lup= 0
iface= 4, icol= 4, nedg= 4, nlup= 1
edg= -2 11 -6 12
lup= 0
iface= 5, icol= 5, nedg= 4, nlup= 1
edg= -7 13 -8 14
lup= 0
iface= 6, icol= 6, nedg= 4, nlup= 1
edg= -11 15 -12 -13
lup= 0
iface= 7, icol= 7, nedg= 4, nlup= 1
edg= -3 -15 -4 16
lup= 0
iface= 8, icol= 8, nedg= 4, nlup= 1
edg= -9 -16 -10 -14
lup= 0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
non-planar
iface=1, nedg=4, nlup=1
EG_makeGeometry(SURFACE) -> status=0
EG_makeGeometry(PCURVE 0) -> status=0
EG_makeGeometry(PCURVE 1) -> status=0
EG_makeGeometry(PCURVE 2) -> status=0
EG_makeGeometry(PCURVE 3) -> status=0
EG_makeTopology(LOOP) -> status=0
EG_makeTopology(FACE) -> status=0
iface= 1 nfit= 881 rms= 4.353e-04
npnt= 1759 rms= 4.167e-04
non-planar
iface=2, nedg=4, nlup=1
EG_makeGeometry(SURFACE) -> status=0
EG_makeGeometry(PCURVE 0) -> status=0
EG_makeGeometry(PCURVE 1) -> status=0
EG_makeGeometry(PCURVE 2) -> status=0
EG_makeGeometry(PCURVE 3) -> status=0
EG_makeTopology(LOOP) -> status=0
EG_makeTopology(FACE) -> status=0
iface= 2 nfit= 908 rms= 4.450e-04
npnt= 1750 rms= 4.175e-04
non-planar
iface=3, nedg=4, nlup=1
EG_makeGeometry(SURFACE) -> status=0
EG_makeGeometry(PCURVE 0) -> status=0
EG_makeGeometry(PCURVE 1) -> status=0
EG_makeGeometry(PCURVE 2) -> status=0
EG_makeGeometry(PCURVE 3) -> status=0
EG_makeTopology(LOOP) -> status=0
EG_makeTopology(FACE) -> status=0
iface= 3 nfit= 904 rms= 4.441e-04
npnt= 1769 rms= 4.151e-04
non-planar
iface=4, nedg=4, nlup=1
EG_makeGeometry(SURFACE) -> status=0
EG_makeGeometry(PCURVE 0) -> status=0
EG_makeGeometry(PCURVE 1) -> status=0
EG_makeGeometry(PCURVE 2) -> status=0
EG_makeGeometry(PCURVE 3) -> status=0
EG_makeTopology(LOOP) -> status=0
EG_makeTopology(FACE) -> status=0
iface= 4 nfit= 919 rms= 4.295e-04
npnt= 1746 rms= 4.114e-04
non-planar
iface=5, nedg=4, nlup=1
EG_makeGeometry(SURFACE) -> status=0
EG_makeGeometry(PCURVE 0) -> status=0
EG_makeGeometry(PCURVE 1) -> status=0
EG_makeGeometry(PCURVE 2) -> status=0
EG_makeGeometry(PCURVE 3) -> status=0
EG_makeTopology(LOOP) -> status=0
EG_makeTopology(FACE) -> status=0
iface= 5 nfit= 890 rms= 4.391e-04
npnt= 1748 rms= 4.124e-04
non-planar
iface=6, nedg=4, nlup=1
EG_makeGeometry(SURFACE) -> status=0
EG_makeGeometry(PCURVE 0) -> status=0
EG_makeGeometry(PCURVE 1) -> status=0
EG_makeGeometry(PCURVE 2) -> status=0
EG_makeGeometry(PCURVE 3) -> status=0
EG_makeTopology(LOOP) -> status=0
EG_makeTopology(FACE) -> status=0
iface= 6 nfit= 872 rms= 4.516e-04
npnt= 1757 rms= 4.134e-04
non-planar
iface=7, nedg=4, nlup=1
EG_makeGeometry(SURFACE) -> status=0
EG_makeGeometry(PCURVE 0) -> status=0
EG_makeGeometry(PCURVE 1) -> status=0
EG_makeGeometry(PCURVE 2) -> status=0
EG_makeGeometry(PCURVE 3) -> status=0
EG_makeTopology(LOOP) -> status=0
EG_makeTopology(FACE) -> status=0
iface= 7 nfit= 900 rms= 4.346e-04
npnt= 1763 rms= 4.186e-04
non-planar
iface=8, nedg=4, nlup=1
EG_makeGeometry(SURFACE) -> status=0
EG_makeGeometry(PCURVE 0) -> status=0
EG_makeGeometry(PCURVE 1) -> status=0
EG_makeGeometry(PCURVE 2) -> status=0
EG_makeGeometry(PCURVE 3) -> status=0
EG_makeTopology(LOOP) -> status=0
EG_makeTopology(FACE) -> status=0
iface= 8 nfit= 879 rms= 4.437e-04
npnt= 1731 rms= 4.157e-04
before makeTopology(SHELL, nfaces=8, closed=1)
File "../../OpenCSM/trunk/data/Slugs/torus_1.egads" is being written
==> Closing input journal file
real 3m3.092s
user 5m3.969s
sys 0m1.385s
+++ set +x
torus_0 passed (as expected)
+++ /Users/jenkins/workspace/ESP_UndefinedCaps/7.4/OpenCSM/data/Slugs/DARWINM1/ESP/DARWINM1/bin/serveESP ../../OpenCSM/trunk/data/Slugs/torus_1 -outLevel 0 -batch -verify
==> serveESP completed successfully
real 0m1.156s
user 0m1.537s
sys 0m0.016s
+++ set +x
torus_1 passed (as expected)
--------------------------------------------------------------------------------------------------
( 16 )
+++ /Users/jenkins/workspace/ESP_UndefinedCaps/7.4/OpenCSM/data/Slugs/DARWINM1/ESP/DARWINM1/bin/Slugs ../../OpenCSM/trunk/data/Slugs/tutorial1 -outLevel 0 -batch -jrnl ../../OpenCSM/trunk/data/Slugs/tutorial1.mod.jrnl
.
After reading: npnt = 4064
ntri = 8102
ncolr = 0
==> Opening input journal file "../../OpenCSM/trunk/data/Slugs/tutorial1.mod.jrnl"
starting dijkstra passes . done
starting dijkstra passes . done
starting dijkstra passes . done
0 dxyzmax= 2.56402e-02 ( 1,1) -2.9163 -0.0289 0.9983
100 dxyzmax= 1.45323e-04 ( 9,1) -1.9409 -0.0146 0.9997
200 dxyzmax= 5.09396e-05 ( 8,1) -2.0590 -0.0046 0.9969
300 dxyzmax= 1.49616e-05 ( 8,1) -2.0594 -0.0017 0.9971
400 dxyzmax= 4.45655e-06 ( 8,1) -2.0595 -0.0009 0.9971
500 dxyzmax= 1.32919e-06 ( 8,1) -2.0596 -0.0006 0.9971
600 dxyzmax= 3.96947e-07 ( 8,1) -2.0596 -0.0005 0.9971
converged
697 dxyzmax= 1.23076e-07 ( 8,1) -2.0596 -0.0005 0.9971
starting dijkstra passes . done
starting dijkstra passes . done
0 dxyzmax= 2.20868e-02 ( 7,0) 2.1405 -0.5575 0.8297
100 dxyzmax= 2.28547e-04 ( 9,1) 1.8131 -0.5377 0.8412
200 dxyzmax= 6.12840e-05 ( 8,1) 1.9363 -0.5296 0.8469
300 dxyzmax= 1.48521e-05 ( 8,1) 1.9338 -0.5265 0.8485
400 dxyzmax= 3.19534e-06 ( 8,1) 1.9332 -0.5257 0.8489
500 dxyzmax= 6.83221e-07 ( 8,1) 1.9331 -0.5255 0.8490
600 dxyzmax= 1.46041e-07 ( 8,1) 1.9330 -0.5255 0.8490
converged
603 dxyzmax= 1.39434e-07 ( 8,1) 1.9330 -0.5255 0.8490
starting dijkstra passes . done
starting dijkstra passes . done
0 dxyzmax= 2.09568e-02 ( 9,0) 1.9247 0.5882 0.8083
100 dxyzmax= 4.25922e-04 ( 8,1) 1.9585 0.5157 0.8530
200 dxyzmax= 1.03603e-04 ( 9,1) 1.8056 0.4941 0.8664
300 dxyzmax= 2.51013e-05 ( 7,1) 2.0683 0.4859 0.8726
400 dxyzmax= 5.55542e-06 ( 7,1) 2.0672 0.4847 0.8733
500 dxyzmax= 1.23147e-06 ( 7,1) 2.0670 0.4844 0.8735
600 dxyzmax= 2.73002e-07 ( 7,1) 2.0669 0.4843 0.8735
converged
645 dxyzmax= 1.38598e-07 ( 7,1) 2.0669 0.4843 0.8735
starting dijkstra passes . done
starting dijkstra passes . done
0 dxyzmax= 2.73743e-02 ( 10,0) -0.9049 0.3021 0.9528
100 dxyzmax= 5.24984e-05 ( 5,2) -0.9610 0.7923 0.6088
200 dxyzmax= 2.68814e-06 ( 5,2) -0.9610 0.7912 0.6105
300 dxyzmax= 1.37019e-07 ( 5,2) -0.9610 0.7912 0.6106
converged
301 dxyzmax= 1.33000e-07 ( 5,2) -0.9610 0.7912 0.6106
starting dijkstra passes . done
starting dijkstra passes . done
0 dxyzmax= 2.33401e-02 ( 1,2) 0.8663 0.9931 0.1057
100 dxyzmax= 6.17670e-05 ( 4,0) 0.9634 0.8916 0.4515
200 dxyzmax= 1.09056e-06 ( 4,0) 0.9648 0.8914 0.4518
converged
254 dxyzmax= 1.23321e-07 ( 4,0) 0.9649 0.8914 0.4518
starting dijkstra passes . done
starting dijkstra passes . done
0 dxyzmax= 2.86805e-02 ( 1,0) -0.9729 -0.9848 0.1687
100 dxyzmax= 3.52678e-04 ( 8,1) -0.9799 -0.4233 0.9051
200 dxyzmax= 1.13721e-05 ( 5,0) -0.9673 -0.7572 0.6516
300 dxyzmax= 7.39764e-07 ( 5,0) -0.9676 -0.7570 0.6518
converged
359 dxyzmax= 1.46460e-07 ( 5,0) -0.9677 -0.7570 0.6518
starting dijkstra passes . done
starting dijkstra passes . done
0 dxyzmax= 2.75324e-02 ( 6,0) 0.9700 -0.7365 0.6764
100 dxyzmax= 3.45937e-05 ( 3,0) 0.9611 -0.9229 0.3831
200 dxyzmax= 2.02092e-07 ( 4,0) 0.9695 -0.8624 0.4997
converged
207 dxyzmax= 1.41049e-07 ( 4,0) 0.9695 -0.8624 0.4997
starting dijkstra passes . done
starting dijkstra passes . done
0 dxyzmax= 1.68911e-02 ( 13,0) -0.9112 0.1974 -0.9802
100 dxyzmax= 7.77697e-05 ( 10,1) -0.9244 0.4911 -0.8690
200 dxyzmax= 2.73423e-05 ( 5,2) -0.9303 0.8652 -0.5011
300 dxyzmax= 5.88987e-06 ( 10,1) -0.9210 0.4974 -0.8656
400 dxyzmax= 1.67538e-06 ( 8,0) -0.9240 0.6680 -0.7439
500 dxyzmax= 5.31026e-07 ( 8,0) -0.9239 0.6680 -0.7439
600 dxyzmax= 1.67928e-07 ( 8,0) -0.9239 0.6680 -0.7439
converged
638 dxyzmax= 1.08376e-07 ( 8,0) -0.9238 0.6680 -0.7439
starting dijkstra passes . done
starting dijkstra passes . done
0 dxyzmax= 2.92202e-02 ( 11,0) -0.9816 -0.9814 -0.1903
100 dxyzmax= 7.90250e-05 ( 6,0) -0.9248 -0.7432 -0.6680
200 dxyzmax= 1.09405e-05 ( 6,0) -0.9214 -0.7426 -0.6686
300 dxyzmax= 1.56026e-06 ( 6,0) -0.9209 -0.7425 -0.6687
400 dxyzmax= 2.22447e-07 ( 6,0) -0.9208 -0.7425 -0.6687
converged
435 dxyzmax= 1.12489e-07 ( 6,0) -0.9208 -0.7425 -0.6687
starting dijkstra passes . done
starting dijkstra passes . done
0 dxyzmax= 2.38941e-02 ( 7,0) 1.0525 -0.6857 -0.7274
100 dxyzmax= 2.80061e-04 ( 3,2) 0.9560 -0.9428 -0.3330
200 dxyzmax= 2.47659e-04 ( 10,1) 0.9764 -0.4559 -0.8897
300 dxyzmax= 1.89916e-05 ( 9,1) 0.9690 -0.5557 -0.8307
400 dxyzmax= 4.73644e-06 ( 8,0) 0.9647 -0.6441 -0.7640
500 dxyzmax= 1.26399e-06 ( 8,0) 0.9645 -0.6442 -0.7639
600 dxyzmax= 3.39281e-07 ( 8,0) 0.9644 -0.6442 -0.7639
converged
684 dxyzmax= 1.12725e-07 ( 8,0) 0.9644 -0.6442 -0.7639
starting dijkstra passes . done
starting dijkstra passes . done
0 dxyzmax= 2.08145e-02 ( 8,0) 0.9860 0.7973 -0.6027
100 dxyzmax= 1.81990e-04 ( 7,0) 0.9742 0.7633 -0.6454
200 dxyzmax= 2.63937e-05 ( 6,0) 0.9700 0.6973 -0.7162
300 dxyzmax= 4.79353e-06 ( 7,0) 0.9650 0.7653 -0.6431
400 dxyzmax= 8.86350e-07 ( 7,0) 0.9648 0.7653 -0.6430
500 dxyzmax= 1.63828e-07 ( 7,0) 0.9647 0.7653 -0.6430
converged
526 dxyzmax= 1.05617e-07 ( 7,0) 0.9647 0.7653 -0.6430
starting dijkstra passes . done
Face 1
...at beginning
Edge 1, npnt= 17, ibeg= 1, iend= 2
Edge 2, npnt= 17, ibeg= 3, iend= 1
Edge 3, npnt= 33, ibeg= 2, iend= 3
...after sorting into Loops
Loop 0 (0:2)
Edge 1, npnt= 17, ibeg= 1, iend= 2
Edge 3, npnt= 33, ibeg= 2, iend= 3
Edge 2, npnt= 17, ibeg= 3, iend= 1
Face 2
...at beginning
Edge 4, npnt= 33, ibeg= 4, iend= 5
Edge 5, npnt= 12, ibeg= 6, iend= 7
Edge 6, npnt= 12, ibeg= 5, iend= 6
Edge 7, npnt= 11, ibeg= 7, iend= 4
...after sorting into Loops
Loop 0 (0:3)
Edge 4, npnt= 33, ibeg= 4, iend= 5
Edge 6, npnt= 12, ibeg= 5, iend= 6
Edge 5, npnt= 12, ibeg= 6, iend= 7
Edge 7, npnt= 11, ibeg= 7, iend= 4
Face 3
...at beginning
Edge 8, npnt= 17, ibeg= 8, iend= 9
Edge 9, npnt= 17, ibeg= 10, iend= 11
Edge 10, npnt= 17, ibeg= 9, iend= 10
Edge 11, npnt= 17, ibeg= 11, iend= 8
...after sorting into Loops
Loop 0 (0:3)
Edge 8, npnt= 17, ibeg= 8, iend= 9
Edge 10, npnt= 17, ibeg= 9, iend= 10
Edge 9, npnt= 17, ibeg= 10, iend= 11
Edge 11, npnt= 17, ibeg= 11, iend= 8
Face 4
...at beginning
Edge -8, npnt= 17, iend= 9, ibeg= 8
Edge 12, npnt= 17, ibeg= 12, iend= 13
Edge 13, npnt= 17, ibeg= 13, iend= 9
Edge 14, npnt= 17, ibeg= 8, iend= 12
...after sorting into Loops
Loop 0 (0:3)
Edge -8, npnt= 17, iend= 9, ibeg= 8
Edge 14, npnt= 17, ibeg= 8, iend= 12
Edge 12, npnt= 17, ibeg= 12, iend= 13
Edge 13, npnt= 17, ibeg= 13, iend= 9
Face 5
...at beginning
Edge -9, npnt= 17, iend= 11, ibeg= 10
Edge -12, npnt= 17, iend= 13, ibeg= 12
Edge 15, npnt= 9, ibeg= 10, iend= 13
Edge 16, npnt= 9, ibeg= 12, iend= 11
...after sorting into Loops
Loop 0 (0:3)
Edge -9, npnt= 17, iend= 11, ibeg= 10
Edge 15, npnt= 9, ibeg= 10, iend= 13
Edge -12, npnt= 17, iend= 13, ibeg= 12
Edge 16, npnt= 9, ibeg= 12, iend= 11
Face 6
...at beginning
Edge -10, npnt= 17, iend= 10, ibeg= 9
Edge -13, npnt= 17, iend= 9, ibeg= 13
Edge -15, npnt= 9, iend= 13, ibeg= 10
...after sorting into Loops
Loop 0 (0:2)
Edge -10, npnt= 17, iend= 10, ibeg= 9
Edge -13, npnt= 17, iend= 9, ibeg= 13
Edge -15, npnt= 9, iend= 13, ibeg= 10
Face 7
...at beginning
Edge -1, npnt= 17, iend= 2, ibeg= 1
Edge 17, npnt= 26, ibeg= 8, iend= 14
Edge 18, npnt= 32, ibeg= 1, iend= 8
Edge 19, npnt= 23, ibeg= 14, iend= 2
...after sorting into Loops
Loop 0 (0:3)
Edge -1, npnt= 17, iend= 2, ibeg= 1
Edge 18, npnt= 32, ibeg= 1, iend= 8
Edge 17, npnt= 26, ibeg= 8, iend= 14
Edge 19, npnt= 23, ibeg= 14, iend= 2
Face 8
...at beginning
Edge -4, npnt= 33, iend= 5, ibeg= 4
Edge 20, npnt= 23, ibeg= 15, iend= 5
Edge 21, npnt= 62, ibeg= 16, iend= 15
Edge 22, npnt= 23, ibeg= 4, iend= 16
...after sorting into Loops
Loop 0 (0:3)
Edge -4, npnt= 33, iend= 5, ibeg= 4
Edge 22, npnt= 23, ibeg= 4, iend= 16
Edge 21, npnt= 62, ibeg= 16, iend= 15
Edge 20, npnt= 23, ibeg= 15, iend= 5
Face 9
...at beginning
Edge -5, npnt= 12, iend= 7, ibeg= 6
Edge -16, npnt= 9, iend= 11, ibeg= 12
Edge 23, npnt= 31, ibeg= 6, iend= 11
Edge 24, npnt= 33, ibeg= 12, iend= 7
...after sorting into Loops
Loop 0 (0:3)
Edge -5, npnt= 12, iend= 7, ibeg= 6
Edge 23, npnt= 31, ibeg= 6, iend= 11
Edge -16, npnt= 9, iend= 11, ibeg= 12
Edge 24, npnt= 33, ibeg= 12, iend= 7
Face 10
...at beginning
Edge -11, npnt= 17, iend= 8, ibeg= 11
Edge -17, npnt= 26, iend= 14, ibeg= 8
Edge 25, npnt= 19, ibeg= 11, iend= 15
Edge 26, npnt= 21, ibeg= 15, iend= 14
...after sorting into Loops
Loop 0 (0:3)
Edge -11, npnt= 17, iend= 8, ibeg= 11
Edge 25, npnt= 19, ibeg= 11, iend= 15
Edge 26, npnt= 21, ibeg= 15, iend= 14
Edge -17, npnt= 26, iend= 14, ibeg= 8
Face 11
...at beginning
Edge -6, npnt= 12, iend= 6, ibeg= 5
Edge -20, npnt= 23, iend= 5, ibeg= 15
Edge -23, npnt= 31, iend= 11, ibeg= 6
Edge -25, npnt= 19, iend= 15, ibeg= 11
...after sorting into Loops
Loop 0 (0:3)
Edge -6, npnt= 12, iend= 6, ibeg= 5
Edge -20, npnt= 23, iend= 5, ibeg= 15
Edge -25, npnt= 19, iend= 15, ibeg= 11
Edge -23, npnt= 31, iend= 11, ibeg= 6
Face 12
...at beginning
Edge -2, npnt= 17, iend= 1, ibeg= 3
Edge -18, npnt= 32, iend= 8, ibeg= 1
Edge 27, npnt= 25, ibeg= 17, iend= 8
Edge 28, npnt= 23, ibeg= 3, iend= 17
...after sorting into Loops
Loop 0 (0:3)
Edge -2, npnt= 17, iend= 1, ibeg= 3
Edge 28, npnt= 23, ibeg= 3, iend= 17
Edge 27, npnt= 25, ibeg= 17, iend= 8
Edge -18, npnt= 32, iend= 8, ibeg= 1
Face 13
...at beginning
Edge -14, npnt= 17, iend= 12, ibeg= 8
Edge -27, npnt= 25, iend= 8, ibeg= 17
Edge 29, npnt= 21, ibeg= 17, iend= 16
Edge 30, npnt= 18, ibeg= 16, iend= 12
...after sorting into Loops
Loop 0 (0:3)
Edge -14, npnt= 17, iend= 12, ibeg= 8
Edge -27, npnt= 25, iend= 8, ibeg= 17
Edge 29, npnt= 21, ibeg= 17, iend= 16
Edge 30, npnt= 18, ibeg= 16, iend= 12
Face 14
...at beginning
Edge -3, npnt= 33, iend= 3, ibeg= 2
Edge -19, npnt= 23, iend= 2, ibeg= 14
Edge -28, npnt= 23, iend= 17, ibeg= 3
Edge 31, npnt= 64, ibeg= 14, iend= 17
...after sorting into Loops
Loop 0 (0:3)
Edge -3, npnt= 33, iend= 3, ibeg= 2
Edge -19, npnt= 23, iend= 2, ibeg= 14
Edge 31, npnt= 64, ibeg= 14, iend= 17
Edge -28, npnt= 23, iend= 17, ibeg= 3
Face 15
...at beginning
Edge -21, npnt= 62, iend= 15, ibeg= 16
Edge -26, npnt= 21, iend= 14, ibeg= 15
Edge -29, npnt= 21, iend= 16, ibeg= 17
Edge -31, npnt= 64, iend= 17, ibeg= 14
...after sorting into Loops
Loop 0 (0:3)
Edge -21, npnt= 62, iend= 15, ibeg= 16
Edge -29, npnt= 21, iend= 16, ibeg= 17
Edge -31, npnt= 64, iend= 17, ibeg= 14
Edge -26, npnt= 21, iend= 14, ibeg= 15
Face 16
...at beginning
Edge -7, npnt= 11, iend= 4, ibeg= 7
Edge -22, npnt= 23, iend= 16, ibeg= 4
Edge -24, npnt= 33, iend= 7, ibeg= 12
Edge -30, npnt= 18, iend= 12, ibeg= 16
...after sorting into Loops
Loop 0 (0:3)
Edge -7, npnt= 11, iend= 4, ibeg= 7
Edge -24, npnt= 33, iend= 7, ibeg= 12
Edge -30, npnt= 18, iend= 12, ibeg= 16
Edge -22, npnt= 23, iend= 16, ibeg= 4
fit1dCloud(npnt=17, ncp=9) -> status=0, numiter=514, normf= 2.4080e-04, dotmin= 0.9614, nmin=2
fit1dCloud(npnt=17, ncp=9) -> status=0, numiter=514, normf= 2.4080e-04, dotmin= 0.9614, nmin=2
fit1dCloud(npnt=33, ncp=9) -> status=0, numiter=774, normf= 4.2593e-04, dotmin= 0.8790, nmin=4
fit1dCloud(npnt=33, ncp=9) -> status=0, numiter=774, normf= 4.2593e-04, dotmin= 0.8790, nmin=4
fit1dCloud(npnt=12, ncp=9) -> status=0, numiter=402, normf= 1.7605e-04, dotmin= 0.9818, nmin=1
fit1dCloud(npnt=12, ncp=9) -> status=0, numiter=412, normf= 1.6679e-04, dotmin= 0.9817, nmin=1
fit1dCloud(npnt=11, ncp=9) -> status=0, numiter=414, normf= 1.2413e-04, dotmin= 0.9844, nmin=1
fit1dCloud(npnt=17, ncp=9) -> status=0, numiter= 8, normf= 3.5006e-07, dotmin= nan, nmin=2
fit1dCloud(npnt=17, ncp=9) -> status=0, numiter= 8, normf= 3.7351e-07, dotmin= nan, nmin=2
fit1dCloud(npnt=17, ncp=9) -> status=0, numiter= 8, normf= 3.6084e-07, dotmin= nan, nmin=2
fit1dCloud(npnt=17, ncp=9) -> status=0, numiter=202, normf= 2.1021e-04, dotmin= 1.0000, nmin=2
fit1dCloud(npnt=17, ncp=9) -> status=0, numiter= 8, normf= 3.7351e-07, dotmin= nan, nmin=2
fit1dCloud(npnt=17, ncp=9) -> status=0, numiter= 8, normf= 3.6084e-07, dotmin= nan, nmin=2
fit1dCloud(npnt=17, ncp=9) -> status=0, numiter=202, normf= 2.1021e-04, dotmin= 1.0000, nmin=2
fit1dCloud(npnt=9, ncp=9) -> status=0, numiter=472, normf= 1.0011e-04, dotmin= 0.9658, nmin=1
fit1dCloud(npnt=9, ncp=9) -> status=0, numiter=486, normf= 9.9262e-05, dotmin= 0.9670, nmin=1
fit1dCloud(npnt=26, ncp=9) -> status=0, numiter=498, normf= 3.3299e-04, dotmin= 0.9587, nmin=3
fit1dCloud(npnt=32, ncp=9) -> status=0, numiter=100, normf= 4.8649e-04, dotmin= 0.9999, nmin=4
fit1dCloud(npnt=23, ncp=9) -> status=0, numiter= 8, normf= 7.5848e-07, dotmin= nan, nmin=2
fit1dCloud(npnt=23, ncp=9) -> status=0, numiter= 8, normf= 7.5848e-07, dotmin= nan, nmin=2
fit1dCloud(npnt=62, ncp=9) -> status=0, numiter=533, normf= 6.8306e-04, dotmin= 0.8774, nmin=6
fit1dCloud(npnt=23, ncp=9) -> status=0, numiter= 8, normf= 7.5848e-07, dotmin= nan, nmin=2
fit1dCloud(npnt=31, ncp=9) -> status=0, numiter= 8, normf= 5.1324e-04, dotmin= 1.0000, nmin=3
fit1dCloud(npnt=33, ncp=9) -> status=0, numiter= 8, normf= 6.0209e-04, dotmin= 1.0000, nmin=2
fit1dCloud(npnt=19, ncp=9) -> status=0, numiter=362, normf= 2.7223e-04, dotmin= 0.9854, nmin=2
fit1dCloud(npnt=21, ncp=9) -> status=0, numiter= 8, normf= 5.5073e-07, dotmin= nan, nmin=2
fit1dCloud(npnt=25, ncp=9) -> status=0, numiter=1000, normf= 3.1980e-04, dotmin= 0.9553, nmin=2
fit1dCloud(npnt=23, ncp=9) -> status=0, numiter= 8, normf= 7.5848e-07, dotmin= nan, nmin=2
fit1dCloud(npnt=21, ncp=9) -> status=0, numiter= 8, normf= 5.5073e-07, dotmin= nan, nmin=2
fit1dCloud(npnt=18, ncp=9) -> status=0, numiter=377, normf= 3.8584e-04, dotmin= 0.9867, nmin=1
fit1dCloud(npnt=64, ncp=9) -> status=0, numiter=473, normf= 7.0379e-04, dotmin= 0.8759, nmin=7
generateFits(1D), CPU= 1.20 sec
iface= 1 npnt= 302
nfit= 302 (100%)
iface= 2 npnt= 299
nfit= 299 (100%)
iface= 3 npnt= 241
nfit= 146 ( 60%)
iface= 4 npnt= 236
nfit= 157 ( 66%)
iface= 5 npnt= 148
nfit= 101 ( 68%)
non-planar (fitting) ipnt=1, prod= 0.08122
extracting south control points from iedge= -9
extracting east control points from iedge= 15
extracting north control points from iedge= -12
extracting west control points from iedge= 16
iface= 6 npnt= 80
nfit= 80 (100%)
iface= 7 npnt= 310
nfit= 198 ( 63%)
non-planar (fitting) ipnt=1, prod= 0.03425
extracting south control points from iedge= -1
extracting east control points from iedge= 18
extracting north control points from iedge= 17
extracting west control points from iedge= 19
iface= 8 npnt= 667
nfit= 408 ( 61%)
non-planar (fitting) ipnt=1, prod= 0.01162
extracting south control points from iedge= -4
extracting east control points from iedge= 22
extracting north control points from iedge= 21
extracting west control points from iedge= 20
iface= 9 npnt= 187
nfit= 98 ( 52%)
non-planar (fitting) ipnt=1, prod= -0.01804
extracting south control points from iedge= -5
extracting east control points from iedge= 23
extracting north control points from iedge= -16
extracting west control points from iedge= 24
iface= 10 npnt= 227
nfit= 134 ( 59%)
non-planar (fitting) ipnt=1, prod= -0.07063
extracting south control points from iedge= -11
extracting east control points from iedge= 25
extracting north control points from iedge= 26
extracting west control points from iedge= -17
iface= 11 npnt= 224
nfit= 131 ( 58%)
non-planar (fitting) ipnt=1, prod= -0.03309
extracting south control points from iedge= -6
extracting east control points from iedge= -20
extracting north control points from iedge= -25
extracting west control points from iedge= -23
iface= 12 npnt= 315
nfit= 176 ( 55%)
non-planar (fitting) ipnt=1, prod= 0.03056
extracting south control points from iedge= -2
extracting east control points from iedge= 28
extracting north control points from iedge= 27
extracting west control points from iedge= -18
iface= 13 npnt= 234
nfit= 147 ( 62%)
non-planar (fitting) ipnt=1, prod= 0.00222
extracting south control points from iedge= -14
extracting east control points from iedge= -27
extracting north control points from iedge= 29
extracting west control points from iedge= 30
iface= 14 npnt= 687
nfit= 422 ( 61%)
non-planar (fitting) ipnt=1, prod= 0.04193
extracting south control points from iedge= -3
extracting east control points from iedge= -19
extracting north control points from iedge= 31
extracting west control points from iedge= -28
iface= 15 npnt= 679
nfit= 411 ( 60%)
non-planar (fitting) ipnt=1, prod= -0.10927
extracting south control points from iedge= -21
extracting east control points from iedge= -29
extracting north control points from iedge= -31
extracting west control points from iedge= -26
iface= 16 npnt= 217
nfit= 127 ( 58%)
non-planar (fitting) ipnt=1, prod= -0.03905
extracting south control points from iedge= -7
extracting east control points from iedge= -24
extracting north control points from iedge= -30
extracting west control points from iedge= -22
ID 1f939ba80: is master
ID 1f939ba80: iface 14 has 422 fitting Points
ID 16d8cf000: start thread
ID 16d8cf000: iface 15 has 411 fitting Points
ID 1f939ba80: iface 14 complete with status=0, numiter= 9, normf= 4.8486e-04, dotmin= 0.8758, nmin= 3, npierce= 0
ID 1f939ba80: iface 8 has 408 fitting Points
ID 16d8cf000: iface 15 complete with status=0, numiter= 11, normf= 5.2428e-04, dotmin= 0.8746, nmin= 4, npierce= 0
ID 16d8cf000: iface 1 has 302 fitting Points
ID 16d8cf000: iface 1 skipped
ID 16d8cf000: iface 2 has 299 fitting Points
ID 16d8cf000: iface 2 skipped
ID 16d8cf000: iface 7 has 198 fitting Points
ID 1f939ba80: iface 8 complete with status=0, numiter= 10, normf= 4.5818e-04, dotmin= 0.8765, nmin= 4, npierce= 0
ID 1f939ba80: iface 12 has 176 fitting Points
ID 16d8cf000: iface 7 complete with status=0, numiter= 19, normf= 3.1339e-04, dotmin= 0.9585, nmin= 1, npierce= 0
ID 16d8cf000: iface 4 has 157 fitting Points
ID 16d8cf000: iface 4 skipped
ID 16d8cf000: iface 13 has 147 fitting Points
ID 16d8cf000: iface 13 complete with status=0, numiter=100, normf= 2.7204e-04, dotmin= 0.9598, nmin= 1, npierce= 0
ID 16d8cf000: iface 3 has 146 fitting Points
ID 16d8cf000: iface 3 skipped
ID 16d8cf000: iface 10 has 134 fitting Points
ID 16d8cf000: iface 10 complete with status=0, numiter= 9, normf= 2.1907e-04, dotmin= 0.9613, nmin= 0, npierce= 0
ID 16d8cf000: iface 11 has 131 fitting Points
ID 1f939ba80: iface 12 complete with status=0, numiter= 99, normf= 3.0453e-04, dotmin= 0.9572, nmin= 1, npierce= 0
ID 1f939ba80: iface 16 has 127 fitting Points
ID 16d8cf000: iface 11 complete with status=0, numiter= 9, normf= 2.4405e-04, dotmin= 0.9800, nmin= 0, npierce= 0
ID 16d8cf000: iface 5 has 101 fitting Points
ID 16d8cf000: iface 5 complete with status=0, numiter= 8, normf= 1.6762e-04, dotmin= 0.9652, nmin= 0, npierce= 0
ID 16d8cf000: iface 9 has 98 fitting Points
ID 16d8cf000: iface 9 complete with status=0, numiter= 9, normf= 3.7300e-04, dotmin= 0.9678, nmin= 0, npierce= 0
ID 16d8cf000: iface 6 has 80 fitting Points
ID 16d8cf000: iface 6 skipped
ID 16d8cf000: stop thread
ID 1f939ba80: iface 16 complete with status=0, numiter= 86, normf= 2.3016e-04, dotmin= 0.9741, nmin= 0, npierce= 0
generateFits(2D), CPU= 26.99 sec
inode= 1, nedg= 3, xyz= -3.00000 0.00000 1.00000
inode= 2, nedg= 3, xyz= -3.00000 1.00000 -0.00000
inode= 3, nedg= 3, xyz= -3.00000 -1.00000 0.00000
inode= 4, nedg= 3, xyz= 3.00000 -1.00000 0.00000
inode= 5, nedg= 3, xyz= 3.00000 1.00000 -0.00000
inode= 6, nedg= 3, xyz= 3.00000 0.47140 0.88192
inode= 7, nedg= 3, xyz= 3.00000 -0.55557 0.83147
inode= 8, nedg= 6, xyz= -1.00000 0.00000 1.00000
inode= 9, nedg= 3, xyz= -1.00000 0.00000 3.00000
inode= 10, nedg= 3, xyz= 1.00000 0.50000 3.00000
inode= 11, nedg= 5, xyz= 1.00000 0.50000 0.86603
inode= 12, nedg= 5, xyz= 1.00000 -0.50000 0.86603
inode= 13, nedg= 3, xyz= 1.00000 -0.50000 3.00000
inode= 14, nedg= 4, xyz= -0.93750 1.00000 -0.00000
inode= 15, nedg= 4, xyz= 0.93750 1.00000 -0.00000
inode= 16, nedg= 4, xyz= 0.93750 -1.00000 0.00000
inode= 17, nedg= 4, xyz= -0.93750 -1.00000 0.00000
iedge= 1, ibeg= 1, iend= 2, ileft= 1, irite= 7
iedge= 2, ibeg= 3, iend= 1, ileft= 1, irite= 12
iedge= 3, ibeg= 2, iend= 3, ileft= 1, irite= 14
iedge= 4, ibeg= 4, iend= 5, ileft= 2, irite= 8
iedge= 5, ibeg= 6, iend= 7, ileft= 2, irite= 9
iedge= 6, ibeg= 5, iend= 6, ileft= 2, irite= 11
iedge= 7, ibeg= 7, iend= 4, ileft= 2, irite= 16
iedge= 8, ibeg= 8, iend= 9, ileft= 3, irite= 4
iedge= 9, ibeg= 10, iend= 11, ileft= 3, irite= 5
iedge= 10, ibeg= 9, iend= 10, ileft= 3, irite= 6
iedge= 11, ibeg= 11, iend= 8, ileft= 3, irite= 10
iedge= 12, ibeg= 12, iend= 13, ileft= 4, irite= 5
iedge= 13, ibeg= 13, iend= 9, ileft= 4, irite= 6
iedge= 14, ibeg= 8, iend= 12, ileft= 4, irite= 13
iedge= 15, ibeg= 10, iend= 13, ileft= 5, irite= 6
iedge= 16, ibeg= 12, iend= 11, ileft= 5, irite= 9
iedge= 17, ibeg= 8, iend= 14, ileft= 7, irite= 10
iedge= 18, ibeg= 1, iend= 8, ileft= 7, irite= 12
iedge= 19, ibeg= 14, iend= 2, ileft= 7, irite= 14
iedge= 20, ibeg= 15, iend= 5, ileft= 8, irite= 11
iedge= 21, ibeg= 16, iend= 15, ileft= 8, irite= 15
iedge= 22, ibeg= 4, iend= 16, ileft= 8, irite= 16
iedge= 23, ibeg= 6, iend= 11, ileft= 9, irite= 11
iedge= 24, ibeg= 12, iend= 7, ileft= 9, irite= 16
iedge= 25, ibeg= 11, iend= 15, ileft= 10, irite= 11
iedge= 26, ibeg= 15, iend= 14, ileft= 10, irite= 15
iedge= 27, ibeg= 17, iend= 8, ileft= 12, irite= 13
iedge= 28, ibeg= 3, iend= 17, ileft= 12, irite= 14
iedge= 29, ibeg= 17, iend= 16, ileft= 13, irite= 15
iedge= 30, ibeg= 16, iend= 12, ileft= 13, irite= 16
iedge= 31, ibeg= 14, iend= 17, ileft= 14, irite= 15
iface= 1, icol= 1, nedg= 3, nlup= 1
edg= 1 3 2
lup= 0
iface= 2, icol= 2, nedg= 4, nlup= 1
edg= 4 6 5 7
lup= 0
iface= 3, icol= 3, nedg= 4, nlup= 1
edg= 8 10 9 11
lup= 0
iface= 4, icol= 4, nedg= 4, nlup= 1
edg= -8 14 12 13
lup= 0
iface= 5, icol= 5, nedg= 4, nlup= 1
edg= -9 15 -12 16
lup= 0
iface= 6, icol= 6, nedg= 3, nlup= 1
edg= -10 -13 -15
lup= 0
iface= 7, icol= 7, nedg= 4, nlup= 1
edg= -1 18 17 19
lup= 0
iface= 8, icol= 8, nedg= 4, nlup= 1
edg= -4 22 21 20
lup= 0
iface= 9, icol= 9, nedg= 4, nlup= 1
edg= -5 23 -16 24
lup= 0
iface= 10, icol= 10, nedg= 4, nlup= 1
edg= -11 25 26 -17
lup= 0
iface= 11, icol= 11, nedg= 4, nlup= 1
edg= -6 -20 -25 -23
lup= 0
iface= 12, icol= 12, nedg= 4, nlup= 1
edg= -2 28 27 -18
lup= 0
iface= 13, icol= 13, nedg= 4, nlup= 1
edg= -14 -27 29 30
lup= 0
iface= 14, icol= 14, nedg= 4, nlup= 1
edg= -3 -19 31 -28
lup= 0
iface= 15, icol= 15, nedg= 4, nlup= 1
edg= -21 -29 -31 -26
lup= 0
iface= 16, icol= 16, nedg= 4, nlup= 1
edg= -7 -24 -30 -22
lup= 0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
planar
iface= 1 is planar, so accuracy is not computed
planar
iface= 2 is planar, so accuracy is not computed
planar
iface= 3 is planar, so accuracy is not computed
planar
iface= 4 is planar, so accuracy is not computed
non-planar
iface=5, nedg=4, nlup=1
EG_makeGeometry(SURFACE) -> status=0
EG_makeGeometry(PCURVE 0) -> status=0
EG_makeGeometry(PCURVE 1) -> status=0
EG_makeGeometry(PCURVE 2) -> status=0
EG_makeGeometry(PCURVE 3) -> status=0
EG_makeTopology(LOOP) -> status=0
EG_makeTopology(FACE) -> status=0
iface= 5 nfit= 101 rms= 3.429e-04
npnt= 148 rms= 3.538e-04
planar
iface= 6 is planar, so accuracy is not computed
non-planar
iface=7, nedg=4, nlup=1
EG_makeGeometry(SURFACE) -> status=0
EG_makeGeometry(PCURVE 0) -> status=0
EG_makeGeometry(PCURVE 1) -> status=0
EG_makeGeometry(PCURVE 2) -> status=0
EG_makeGeometry(PCURVE 3) -> status=0
EG_makeTopology(LOOP) -> status=0
EG_makeTopology(FACE) -> status=0
iface= 7 nfit= 198 rms= 5.905e-04
npnt= 310 rms= 6.471e-04
non-planar
iface=8, nedg=4, nlup=1
EG_makeGeometry(SURFACE) -> status=0
EG_makeGeometry(PCURVE 0) -> status=0
EG_makeGeometry(PCURVE 1) -> status=0
EG_makeGeometry(PCURVE 2) -> status=0
EG_makeGeometry(PCURVE 3) -> status=0
EG_makeTopology(LOOP) -> status=0
EG_makeTopology(FACE) -> status=0
iface= 8 nfit= 408 rms= 8.219e-04
npnt= 667 rms= 8.316e-04
non-planar
iface=9, nedg=4, nlup=1
EG_makeGeometry(SURFACE) -> status=0
EG_makeGeometry(PCURVE 0) -> status=0
EG_makeGeometry(PCURVE 1) -> status=0
EG_makeGeometry(PCURVE 2) -> status=0
EG_makeGeometry(PCURVE 3) -> status=0
EG_makeTopology(LOOP) -> status=0
EG_makeTopology(FACE) -> status=0
iface= 9 nfit= 98 rms= 7.772e-04
npnt= 187 rms= 7.312e-04
non-planar
iface=10, nedg=4, nlup=1
EG_makeGeometry(SURFACE) -> status=0
EG_makeGeometry(PCURVE 0) -> status=0
EG_makeGeometry(PCURVE 1) -> status=0
EG_makeGeometry(PCURVE 2) -> status=0
EG_makeGeometry(PCURVE 3) -> status=0
EG_makeTopology(LOOP) -> status=0
EG_makeTopology(FACE) -> status=0
iface= 10 nfit= 134 rms= 4.326e-04
npnt= 227 rms= 4.397e-04
non-planar
iface=11, nedg=4, nlup=1
EG_makeGeometry(SURFACE) -> status=0
EG_makeGeometry(PCURVE 0) -> status=0
EG_makeGeometry(PCURVE 1) -> status=0
EG_makeGeometry(PCURVE 2) -> status=0
EG_makeGeometry(PCURVE 3) -> status=0
EG_makeTopology(LOOP) -> status=0
EG_makeTopology(FACE) -> status=0
iface= 11 nfit= 131 rms= 4.861e-04
npnt= 224 rms= 5.392e-04
non-planar
iface=12, nedg=4, nlup=1
EG_makeGeometry(SURFACE) -> status=0
EG_makeGeometry(PCURVE 0) -> status=0
EG_makeGeometry(PCURVE 1) -> status=0
EG_makeGeometry(PCURVE 2) -> status=0
EG_makeGeometry(PCURVE 3) -> status=0
EG_makeTopology(LOOP) -> status=0
EG_makeTopology(FACE) -> status=0
iface= 12 nfit= 176 rms= 5.678e-04
npnt= 315 rms= 6.022e-04
non-planar
iface=13, nedg=4, nlup=1
EG_makeGeometry(SURFACE) -> status=0
EG_makeGeometry(PCURVE 0) -> status=0
EG_makeGeometry(PCURVE 1) -> status=0
EG_makeGeometry(PCURVE 2) -> status=0
EG_makeGeometry(PCURVE 3) -> status=0
EG_makeTopology(LOOP) -> status=0
EG_makeTopology(FACE) -> status=0
iface= 13 nfit= 147 rms= 5.052e-04
npnt= 234 rms= 4.777e-04
non-planar
iface=14, nedg=4, nlup=1
EG_makeGeometry(SURFACE) -> status=0
EG_makeGeometry(PCURVE 0) -> status=0
EG_makeGeometry(PCURVE 1) -> status=0
EG_makeGeometry(PCURVE 2) -> status=0
EG_makeGeometry(PCURVE 3) -> status=0
EG_makeTopology(LOOP) -> status=0
EG_makeTopology(FACE) -> status=0
iface= 14 nfit= 422 rms= 8.746e-04
npnt= 687 rms= 8.848e-04
non-planar
iface=15, nedg=4, nlup=1
EG_makeGeometry(SURFACE) -> status=0
EG_makeGeometry(PCURVE 0) -> status=0
EG_makeGeometry(PCURVE 1) -> status=0
EG_makeGeometry(PCURVE 2) -> status=0
EG_makeGeometry(PCURVE 3) -> status=0
EG_makeTopology(LOOP) -> status=0
EG_makeTopology(FACE) -> status=0
iface= 15 nfit= 411 rms= 9.378e-04
npnt= 679 rms= 9.462e-04
non-planar
iface=16, nedg=4, nlup=1
EG_makeGeometry(SURFACE) -> status=0
EG_makeGeometry(PCURVE 0) -> status=0
EG_makeGeometry(PCURVE 1) -> status=0
EG_makeGeometry(PCURVE 2) -> status=0
EG_makeGeometry(PCURVE 3) -> status=0
EG_makeTopology(LOOP) -> status=0
EG_makeTopology(FACE) -> status=0
iface= 16 nfit= 127 rms= 4.368e-04
npnt= 217 rms= 6.038e-04
before makeTopology(SHELL, nfaces=16, closed=1)
File "../../OpenCSM/trunk/data/Slugs/tutorial1.egads" is being written
==> Closing input journal file
real 0m24.806s
user 0m34.999s
sys 0m0.142s
+++ set +x
tutorial1 passed (as expected)
+++ /Users/jenkins/workspace/ESP_UndefinedCaps/7.4/OpenCSM/data/Slugs/DARWINM1/ESP/DARWINM1/bin/serveESP ../../OpenCSM/trunk/data/Slugs/tutorial1 -outLevel 0 -batch -verify
==> serveESP completed successfully
real 0m0.698s
user 0m0.748s
sys 0m0.012s
+++ set +x
tutorial1 passed (as expected)
--------------------------------------------------------------------------------------------------
( 17 )
+++ /Users/jenkins/workspace/ESP_UndefinedCaps/7.4/OpenCSM/data/Slugs/DARWINM1/ESP/DARWINM1/bin/Slugs ../../OpenCSM/trunk/data/Slugs/wing_0 -outLevel 0 -batch -jrnl ../../OpenCSM/trunk/data/Slugs/wing_0.mod.jrnl -subsample 10
................
After reading: npnt = 75954
ntri = 151904
==> Opening input journal file "../../OpenCSM/trunk/data/Slugs/wing_0.mod.jrnl"
starting dijkstra passes . done
starting dijkstra passes . done
starting dijkstra passes . done
starting dijkstra passes .. done
starting dijkstra passes . done
starting dijkstra passes .. done
starting dijkstra passes . done
starting dijkstra passes . done
starting dijkstra passes . done
starting dijkstra passes . done
Face 1
...at beginning
Edge 1, npnt= 82, ibeg= 1, iend= 2
Edge 2, npnt= 82, ibeg= 2, iend= 1
...after sorting into Loops
Loop 0 (0:1)
Edge 1, npnt= 82, ibeg= 1, iend= 2
Edge 2, npnt= 82, ibeg= 2, iend= 1
Face 2
...at beginning
Edge 3, npnt= 52, ibeg= 3, iend= 4
Edge 4, npnt= 53, ibeg= 4, iend= 3
...after sorting into Loops
Loop 0 (0:1)
Edge 3, npnt= 52, ibeg= 3, iend= 4
Edge 4, npnt= 53, ibeg= 4, iend= 3
Face 3
...at beginning
Edge -1, npnt= 82, iend= 2, ibeg= 1
Edge -3, npnt= 52, iend= 4, ibeg= 3
Edge 5, npnt= 1025, ibeg= 1, iend= 4
Edge 6, npnt= 257, ibeg= 3, iend= 2
...after sorting into Loops
Loop 0 (0:3)
Edge -1, npnt= 82, iend= 2, ibeg= 1
Edge 5, npnt= 1025, ibeg= 1, iend= 4
Edge -3, npnt= 52, iend= 4, ibeg= 3
Edge 6, npnt= 257, ibeg= 3, iend= 2
Face 4
...at beginning
Edge -2, npnt= 82, iend= 1, ibeg= 2
Edge -4, npnt= 53, iend= 3, ibeg= 4
Edge -5, npnt= 1025, iend= 4, ibeg= 1
Edge -6, npnt= 257, iend= 2, ibeg= 3
...after sorting into Loops
Loop 0 (0:3)
Edge -2, npnt= 82, iend= 1, ibeg= 2
Edge -6, npnt= 257, iend= 2, ibeg= 3
Edge -4, npnt= 53, iend= 3, ibeg= 4
Edge -5, npnt= 1025, iend= 4, ibeg= 1
fit1dCloud(npnt=82, ncp=9) -> status=0, numiter=389, normf= 5.1365e-04, dotmin= 0.4369, nmin=6
fit1dCloud(npnt=82, ncp=9) -> status=0, numiter=387, normf= 7.3607e-04, dotmin= 0.4046, nmin=7
fit1dCloud(npnt=52, ncp=9) -> status=0, numiter=411, normf= 3.0312e-04, dotmin= 0.4520, nmin=3
fit1dCloud(npnt=53, ncp=9) -> status=0, numiter=409, normf= 4.1968e-04, dotmin= 0.3874, nmin=4
fit1dCloud(npnt=1025, ncp=9) -> status=0, numiter= 14, normf= 4.3780e-06, dotmin= 1.0000, nmin=128
fit1dCloud(npnt=257, ncp=9) -> status=0, numiter= 13, normf= 1.0694e-06, dotmin= 1.0000, nmin=32
generateFits(1D), CPU= 0.61 sec
iface= 1 npnt= 543
nfit= 215 ( 39%)
iface= 2 npnt= 239
nfit= 127 ( 53%)
iface= 3 npnt= 37529
nfit= 1571 ( 4%)
non-planar (fitting) ipnt=7, prod= -0.00130
extracting south control points from iedge= -1
extracting east control points from iedge= 5
extracting north control points from iedge= -3
extracting west control points from iedge= 6
iface= 4 npnt= 39190
nfit= 1477 ( 3%)
non-planar (fitting) ipnt=1, prod= 0.00480
extracting south control points from iedge= -2
extracting east control points from iedge= -6
extracting north control points from iedge= -4
extracting west control points from iedge= -5
ID 1f939ba80: is master
ID 1f939ba80: iface 3 has 1571 fitting Points
ID 16ba4f000: start thread
ID 16ba4f000: iface 4 has 1477 fitting Points
ID 16ba4f000: iface 4 complete with status=0, numiter= 8, normf= 4.0950e-04, dotmin= 0.4044, nmin= 17, npierce= 0
ID 16ba4f000: iface 1 has 215 fitting Points
ID 16ba4f000: iface 1 skipped
ID 16ba4f000: iface 2 has 127 fitting Points
ID 16ba4f000: iface 2 skipped
ID 16ba4f000: stop thread
ID 1f939ba80: iface 3 complete with status=0, numiter= 10, normf= 1.6210e-04, dotmin= 0.4397, nmin= 17, npierce= 0
generateFits(2D), CPU= 10.70 sec
inode= 1, nedg= 3, xyz= 0.00000 0.00000 0.00000
inode= 2, nedg= 3, xyz= 4.72456 -0.00000 -0.00000
inode= 3, nedg= 3, xyz= 5.15653 13.47582 1.15737
inode= 4, nedg= 3, xyz= 2.33259 13.22876 1.15737
iedge= 1, ibeg= 1, iend= 2, ileft= 1, irite= 3
iedge= 2, ibeg= 2, iend= 1, ileft= 1, irite= 4
iedge= 3, ibeg= 3, iend= 4, ileft= 2, irite= 3
iedge= 4, ibeg= 4, iend= 3, ileft= 2, irite= 4
iedge= 5, ibeg= 1, iend= 4, ileft= 3, irite= 4
iedge= 6, ibeg= 3, iend= 2, ileft= 3, irite= 4
iface= 1, icol= 1, nedg= 2, nlup= 1
edg= 1 2
lup= 0
iface= 2, icol= 2, nedg= 2, nlup= 1
edg= 3 4
lup= 0
iface= 3, icol= 3, nedg= 4, nlup= 1
edg= -1 5 -3 6
lup= 0
iface= 4, icol= 4, nedg= 4, nlup= 1
edg= -2 -6 -4 -5
lup= 0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
EG_makeGeometry(CURVE) -> status=0
planar
iface= 1 is planar, so accuracy is not computed
planar
iface= 2 is planar, so accuracy is not computed
non-planar
iface=3, nedg=4, nlup=1
EG_makeGeometry(SURFACE) -> status=0
EG_makeGeometry(PCURVE 0) -> status=0
EG_makeGeometry(PCURVE 1) -> status=0
EG_makeGeometry(PCURVE 2) -> status=0
EG_makeGeometry(PCURVE 3) -> status=0
EG_makeTopology(LOOP) -> status=0
EG_makeTopology(FACE) -> status=0
iface= 3 nfit= 1571 rms= 2.480e-04
npnt= 37529 rms= 2.370e-04
non-planar
iface=4, nedg=4, nlup=1
EG_makeGeometry(SURFACE) -> status=0
EG_makeGeometry(PCURVE 0) -> status=0
EG_makeGeometry(PCURVE 1) -> status=0
EG_makeGeometry(PCURVE 2) -> status=0
EG_makeGeometry(PCURVE 3) -> status=0
EG_makeTopology(LOOP) -> status=0
EG_makeTopology(FACE) -> status=0
iface= 4 nfit= 1477 rms= 6.934e-04
npnt= 39190 rms= 4.870e-04
before makeTopology(SHELL, nfaces=4, closed=1)
File "../../OpenCSM/trunk/data/Slugs/wing_1.egads" is being written
==> Closing input journal file
real 1m28.597s
user 1m31.259s
sys 0m0.338s
+++ set +x
wing_0 passed (as expected)
+++ /Users/jenkins/workspace/ESP_UndefinedCaps/7.4/OpenCSM/data/Slugs/DARWINM1/ESP/DARWINM1/bin/serveESP ../../OpenCSM/trunk/data/Slugs/wing_1 -outLevel 0 -batch -verify
==> serveESP completed successfully with 1 warnings
real 0m0.803s
user 0m1.391s
sys 0m0.016s
+++ set +x
wing_1 passed (as expected)
--------------------------------------------------------------------------------------------------
[GNU C Compiler (gcc)] Parsing console log (workspace: '/Users/jenkins/workspace/ESP_UndefinedCaps/7.4/OpenCSM/data/Slugs/DARWINM1')
[GNU C Compiler (gcc)] Successfully parsed console log
[GNU C Compiler (gcc)] -> found 0 issues (skipped 0 duplicates)
[GNU C Compiler (gcc)] Skipping post processing
[GNU C Compiler (gcc)] No filter has been set, publishing all 0 issues
[GNU C Compiler (gcc)] Repository miner is not configured, skipping repository mining
[Clang] Parsing console log (workspace: '/Users/jenkins/workspace/ESP_UndefinedCaps/7.4/OpenCSM/data/Slugs/DARWINM1')
[Clang] -> found 0 issues (skipped 0 duplicates)
[Clang] Parsing console log (workspace: '/Users/jenkins/workspace/ESP_UndefinedCaps/7.4/OpenCSM/data/Slugs/DARWINM1')
[Clang] -> found 0 issues (skipped 0 duplicates)
[Clang] Successfully parsed console log
[Clang] -> found 0 issues (skipped 0 duplicates)
[Clang] Parsing console log (workspace: '/Users/jenkins/workspace/ESP_UndefinedCaps/7.4/OpenCSM/data/Slugs/DARWINM1')
[Clang] Skipping post processing
[Clang] No filter has been set, publishing all 0 issues
[Clang] Repository miner is not configured, skipping repository mining
[Static Analysis] Reference build recorder is not configured
[Static Analysis] Obtaining reference build from same job (7.4,OpenCSM/data/Slugs,DARWINM1,viggen)
[Static Analysis] Using reference build 'ESP_UndefinedCaps/CASREV=7.4,ESPTEST=OpenCSM/data/Slugs,ESP_ARCH=DARWINM1,buildnode=viggen #174' to compute new, fixed, and outstanding issues
[Static Analysis] Issues delta (vs. reference build): outstanding: 0, new: 0, fixed: 0
[Static Analysis] Evaluating quality gates
[Static Analysis] -> PASSED - Total (any severity): 0 - Quality Gate: 1
[Static Analysis] -> All quality gates have been passed
[Static Analysis] Health report is disabled - skipping
[Static Analysis] Created analysis result for 0 issues (found 0 new issues, fixed 0 issues)
[Static Analysis] Attaching ResultAction with ID 'analysis' to build 'ESP_UndefinedCaps/CASREV=7.4,ESPTEST=OpenCSM/data/Slugs,ESP_ARCH=DARWINM1,buildnode=viggen #175'.
[Checks API] No suitable checks publisher found.
[PostBuildScript] - [INFO] Executing post build scripts.
[PostBuildScript] - [INFO] build step #0 should only be executed on MATRIX
[WS-CLEANUP] Deleting project workspace...
[WS-CLEANUP] done
Finished: SUCCESS
![[Jenkins]](/csi/static/a404d988/images/svgs/logo.svg){kind=logo}
