Skipping 834 KB..
Full Log
AFLR3 IC : INPUT SURFACE GRID CHECK
AFLR3 IC : Nodes, Elements = 298 0
UG3 : Boundary Conditions
UG3 : B-Face ID Boundary Condition
UG3 : 1 Solid
UG3 : 2 Solid
UG3 : 3 Solid
UG3 : 4 Solid
AFLR3 : CPU Time = 0.001 seconds
AFLR3 IG : INITIAL VOLUME GRID GENERATION
AFLR3 IG : Nodes, Elements = 298 0
AFLR3 IG : Nodes, Elements = 8 10
AFLR3 IG : Nodes, Elements = 62 334
AFLR3 IG : Nodes, Elements = 124 726
AFLR3 IG : Nodes, Elements = 186 1151
AFLR3 IG : Nodes, Elements = 248 1547
AFLR3 IG : Nodes, Elements = 305 1919
AFLR3 IG : Nodes, Elements = 298 1076
AFLR3 IG : Nodes, Elements = 298 931
AFLR3 IG : Nodes, Elements = 298 822
AFLR3 : CPU Time = 0.004 seconds
AFLR3 GG : ISOTROPIC VOLUME GRID GENERATION
AFLR3 GG : Nodes, Elements = 298 822
AFLR3 GG : Nodes, Elements = 349 975
AFLR3 GG : Nodes, Elements = 349 1115
AFLR3 GG : Nodes, Elements = 349 1047
AFLR3 GG : Nodes, Elements = 383 1149
AFLR3 GG : Nodes, Elements = 383 1311
AFLR3 GG : Nodes, Elements = 383 1254
AFLR3 GG : Nodes, Elements = 399 1302
AFLR3 GG : Nodes, Elements = 399 1374
AFLR3 GG : Nodes, Elements = 399 1350
AFLR3 GG : Nodes, Elements = 403 1362
AFLR3 GG : Nodes, Elements = 403 1377
AFLR3 GG : Nodes, Elements = 403 1376
AFLR3 : CPU Time = 0.004 seconds
AFLR3 QI : QUALITY IMPROVEMENT
AFLR3 QI : Nodes, Elements = 403 1376
AFLR3 QI : Nodes, Elements = 402 1370
AFLR3 QI : Nodes, Elements = 402 1376
AFLR3 QI : Nodes, Elements = 402 1371
AFLR3 QI : Nodes, Elements = 402 1365
AFLR3 QI : Nodes, Elements = 402 1368
AFLR3 QI : Nodes, Elements = 402 1364
AFLR3 QI : Nodes, Elements = 402 1363
AFLR3 : CPU Time = 0.002 seconds
AFLR3 : DONE
UG3 : DIHEDRAL ANGLE CHECK
UG3 : No. Tet Elems = 1363
UG3 : Min, Max Ang = 21.47 133.3
UG3 : Average Angle = 70.1
UG3 : No. Angle>160.0 = 0
UG3 : No. Angle>179.9 = 0
UG3 : VOL CHECK
UG3 : Total-Volume = 0.0184
UG3 : No. Tet Elems = 1363
UG3 : Min Vol = 1.71e-06
UG3 : Average Vol = 1.35e-05
UG3 : Total-Tet-Vol = 0.0184
UG3 : No. Vol<TOL = 0
UG3 : Q VOL-LENGTH-RATIO CHECK
2/3 2
UG3 : Q = c * Vol / sum( L )
UG3 : 0 <= Q <= 1
UG3 : No. Tet Elems = 1363
UG3 : Min, Max Q = 0.599 0.999
UG3 : Average Q = 0.859
UG3 : No. Q< 0.1 = 0
UG3 : No. Q< 0.01 = 0
OVERALL : CPU Time = 0.013 seconds
UG3 : DIHEDRAL ANGLE CHECK
UG3 : No. Tet Elems = 1363
UG3 : Min, Max Ang = 21.47 133.3
UG3 : Average Angle = 70.1
UG3 : No. Angle>160.0 = 0
UG3 : No. Angle>179.9 = 0
UG3 : VOL CHECK
UG3 : Total-Volume = 0.0184
UG3 : No. Tet Elems = 1363
UG3 : Min Vol = 1.71e-06
UG3 : Average Vol = 1.35e-05
UG3 : Total-Tet-Vol = 0.0184
UG3 : No. Vol<TOL = 0
UG3 : Q VOL-LENGTH-RATIO CHECK
2/3 2
UG3 : Q = c * Vol / sum( L )
UG3 : 0 <= Q <= 1
UG3 : Note that L includes scaling for BL-aspect=ratio
UG3 : No. Tet Elems = 1363
UG3 : Min, Max Q = 0.649 1
UG3 : Average Q = 0.878
UG3 : No. Q< 0.1 = 0
UG3 : No. Q< 0.01 = 0
UG3 : CPU Time = 0.000 seconds
EGADS : ---------------------------------------
EGADS : Engineering Geometry Aircraft Design System
EGADS : Version 1.24
EGADS : OpenCASCADE Version 7.6.0
EGADS : ---------------------------------------
EGADS : CREATE EGADS TESS FROM AFLR3 DATA
: XYZ DEVIATION > TOLERANCE AT 9 NODES ON EDGE 1
: MAX XYZ DEVIATION 0.000778949 TOLERANCE 0.000251272 AT NODE 12
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 1
: INPUT EDGE COORDINATE T 3.1338
: INPUT X,Y,Z COORDINATES 0.36, 0, -0.46
: EVALUATED X,Y,Z COORDINATES 0.360779, 0, -0.459997
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 2
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 3
: XYZ DEVIATION > TOLERANCE AT 6 NODES ON EDGE 3
: MAX XYZ DEVIATION 0.00250734 TOLERANCE 0.000451572 AT NODE 7
: INPUT EDGE COORDINATE T 3.11652
: INPUT X,Y,Z COORDINATES 0.36, -0.6, -0.46
: EVALUATED X,Y,Z COORDINATES 0.362507, -0.6, -0.459969
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 4
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 5
: XYZ DEVIATION > TOLERANCE AT 6 NODES ON EDGE 5
: MAX XYZ DEVIATION 0.00250479 TOLERANCE 0.000441441 AT NODE 7
: INPUT EDGE COORDINATE T 6.25814
: INPUT X,Y,Z COORDINATES 0.36, -0.6, -0.26
: EVALUATED X,Y,Z COORDINATES 0.357495, -0.6, -0.260031
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 6
: XYZ DEVIATION > TOLERANCE AT 7 NODES ON EDGE 6
: MAX XYZ DEVIATION 0.00096734 TOLERANCE 0.000329529 AT NODE 11
: INPUT EDGE COORDINATE T 6.27351
: INPUT X,Y,Z COORDINATES 0.36, 0, -0.26
: EVALUATED X,Y,Z COORDINATES 0.359033, 0, -0.260005
EGADS : CREATING TESSELLATION FOR BODY 0 FACE 1
EGADS : CREATING TESSELLATION FOR BODY 0 FACE 2
EGADS : CREATING TESSELLATION FOR BODY 0 FACE 3
EGADS : CREATING TESSELLATION FOR BODY 0 FACE 4
*** NON-FATAL EGADS ERROR 3299 ***
*** COORDINATES FOUND THAT DEVIATE FROM EGADS GEOMETRY ***
EGADS : EGADS TESS CREATED
EGADS : CHECK TESS FACE NODE MAP
EGADS : CHECKING NODE MAP FOR BODY 0 FACE 1
EGADS : CHECKING NODE MAP FOR BODY 0 FACE 2
EGADS : CHECKING NODE MAP FOR BODY 0 FACE 3
EGADS : CHECKING NODE MAP FOR BODY 0 FACE 4
Volume mesh:
Number of nodes = 0
Number of elements = 0
Number of triangles = 0
Number of quadrilatarals = 0
Number of tetrahedrals = 0
Number of pyramids = 0
Number of prisms = 0
Number of hexahedrals = 0
No project name ("Proj_Name") provided - A volume mesh will not be written out
Traceback (most recent call last):
File "/Users/jenkins/workspace/ESP_UndefinedCaps/7.6/CAPS/STRUCTURE/DARWIN64/ESP/DARWIN64/examples/pyCAPS/plato_aflr_table_morph_PyTest.py", line 48, in <module>
plato.preAnalysis()
File "/Users/jenkins/workspace/ESP_UndefinedCaps/7.6/CAPS/STRUCTURE/DARWIN64/CAPS/pyCAPS/pyCAPS/problem.py", line 2140, in preAnalysis
self._analysisObj.preAnalysis()
File "/Users/jenkins/workspace/ESP_UndefinedCaps/7.6/CAPS/STRUCTURE/DARWIN64/CAPS/pyCAPS/pyCAPS/caps.py", line 999, in wrapper_checkClosed
return func(*args, **kwargs)
File "/Users/jenkins/workspace/ESP_UndefinedCaps/7.6/CAPS/STRUCTURE/DARWIN64/CAPS/pyCAPS/pyCAPS/caps.py", line 2861, in preAnalysis
if stat: _raiseStatus(stat, errors=capsErrs(nErr, errs))
File "/Users/jenkins/workspace/ESP_UndefinedCaps/7.6/CAPS/STRUCTURE/DARWIN64/CAPS/pyCAPS/pyCAPS/caps.py", line 822, in _raiseStatus
raise CAPSError(status, msg=msg, errors=errors)
pyCAPS.caps.CAPSError: CAPS_IOERR:
================================================================================
aimMesh.c:1071 in aim_readBinaryUgrid(): Error status = -332
aflr3AIM.c:1526 in aimCalcOutput(): Error status = -332
transferValues for Mesh from Volume_Mesh = -332
================================================================================
real 0m2.209s
user 0m1.937s
sys 0m0.412s
+ status=1
+ set +x
=================================================
CAPS verification (using pyCAPS) case plato_aflr_table_morph_PyTest.py failed (as NOT expected)
=================================================
=================================================
+ echo 'plato_aflr_cyli_box_PyTest.py test;'
+ tee -a /Users/jenkins/workspace/ESP_UndefinedCaps/7.6/CAPS/STRUCTURE/DARWIN64/ESP/DARWIN64/examples/regressionTest/pyCAPSlog.txt
plato_aflr_cyli_box_PyTest.py test;
+ python -u plato_aflr_cyli_box_PyTest.py -outLevel=0
+ tee -a /Users/jenkins/workspace/ESP_UndefinedCaps/7.6/CAPS/STRUCTURE/DARWIN64/ESP/DARWIN64/examples/regressionTest/pyCAPSlog.txt
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 5
Name = box, index = 1
Name = cyl2, index = 2
Name = box;cyl2, index = 3
Name = cyl1, index = 4
Name = box;cyl1, index = 5
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 0
AFLR2 : ---------------------------------------
AFLR2 : AFLR2 LIBRARY
AFLR2 : ADVANCING-FRONT/LOCAL-RECONNECTION
AFLR2 : TRIA/QUAD GRID GENERATOR
AFLR2 : Version Number 9.14.7
AFLR2 : Version Date 07/16/23 @ 01:42PM
AFLR2 : Compile OS Darwin 22.5.0 x86_64
AFLR2 : Compile Date 07/25/23 @ 11:59AM
AFLR2 : Copyright 1994-2021, D.L. Marcum
AFLR2 : ---------------------------------------
AFLR4 : ---------------------------------------
AFLR4 : AFLR4 LIBRARY
AFLR4 : ADVANCING-FRONT/LOCAL-RECONNECTION
AFLR4 : TRIA/QUAD SURFACE GRID GENERATOR
AFLR4 : Version Number 11.5.8
AFLR4 : Version Date 07/24/23 @ 06:11PM
AFLR4 : Compile OS Darwin 22.5.0 x86_64
AFLR4 : Compile Date 07/25/23 @ 12:00PM
AFLR4 : Copyright 1994-2021, D.L. Marcum
AFLR4 : ---------------------------------------
EGADS : ---------------------------------------
EGADS : Engineering Geometry Aircraft Design System
EGADS : Version 1.24
EGADS : OpenCASCADE Version 7.6.0
EGADS : ---------------------------------------
EGADS : EGADS CAD Geometry Setup
EGADS : Model has 3 Active Bodies
EGADS : Body 0 is a SolidBody
EGADS : Body 0 has 1 Shells
EGADS : Body 0 has 8 Faces
EGADS : Body 0 has 18 Edges
EGADS : Body 0 has 10 Loops
EGADS : Body 0 has 12 Nodes
EGADS : Body 1 is a SolidBody
EGADS : Body 1 has 1 Shells
EGADS : Body 1 has 6 Faces
EGADS : Body 1 has 12 Edges
EGADS : Body 1 has 8 Loops
EGADS : Body 1 has 8 Nodes
EGADS : Body 2 is a SolidBody
EGADS : Body 2 has 1 Shells
EGADS : Body 2 has 4 Faces
EGADS : Body 2 has 6 Edges
EGADS : Body 2 has 4 Loops
EGADS : Body 2 has 4 Nodes
EGADS : Check Grid BCs
EGADS : Grid BCs are OK
EGADS : Face Neighbor-Faces Information
EGADS : QC = Face Quad Combination Flag
EGADS : IER = Face Isolated Edge Refinement Flag
EGADS : ER = Face Edge Refinement Factor
EGADS : Not applicable for Faces with a FarField Grid BC.
EGADS : SF = Face Scale Factor
EGADS : Not applicable for Faces with a FarField Grid BC.
EGADS : Face Body QC IER ER Scale Neighbor
EGADS : ID Active ID Flag Flag Weight Factor Faces
EGADS : 1 Yes 0 0 1 0 1 2 3 4 5
EGADS : 2 Yes 0 0 1 0 1 1 3 5 6 7 8
EGADS : 3 Yes 0 0 1 0 1 1 2 4 6
EGADS : 4 Yes 0 0 1 0 1 1 3 5 6 7 8
EGADS : 5 Yes 0 0 1 0 1 1 2 4 6
EGADS : 6 Yes 0 0 1 0 1 2 3 4 5
EGADS : 7 Yes 0 0 1 0 1 2 4 8
EGADS : 8 Yes 0 0 1 0 1 2 4 7
EGADS : 9 Yes 1 0 1 0 1 10 11 12 13
EGADS : 10 Yes 1 0 1 0 1 9 11 14
EGADS : 11 Yes 1 0 1 0 1 9 10 14
EGADS : 12 Yes 1 0 1 0 1 9 13 14
EGADS : 13 Yes 1 0 1 0 1 9 12 14
EGADS : 14 Yes 1 0 1 0 1 10 11 12 13
EGADS : 15 Yes 2 0 1 0 1 16 17
EGADS : 16 Yes 2 0 1 0 1 15 17 18
EGADS : 17 Yes 2 0 1 0 1 15 16 18
EGADS : 18 Yes 2 0 1 0 1 16 17
EGADS : Face Edges Information
EGADS : Face Edges
EGADS : 1 1 2 -3 -4
EGADS : 2 5 6 -7 -1 8 9
EGADS : 3 -2 7 11 -10
EGADS : 4 -12 3 10 -13 -14 -15
EGADS : 5 4 12 -16 -5
EGADS : 6 -6 16 13 -11
EGADS : 7 -17 -8 18 14
EGADS : 8 17 15 -18 -9
EGADS : 9 -19 -20 21 22
EGADS : 10 -23 19 25 -24
EGADS : 11 23 -26 -25 20
EGADS : 12 -27 -21 28 29
EGADS : 13 27 30 -28 -22
EGADS : 14 24 26 -29 -30
EGADS : 15 -31 -32
EGADS : 16 -33 31 35 -34
EGADS : 17 33 -36 -35 32
EGADS : 18 34 36
EGADS : Face Loops Information
EGADS : Face Loops
EGADS : 1 1
EGADS : 2 2 3
EGADS : 3 4
EGADS : 4 5 6
EGADS : 5 7
EGADS : 6 8
EGADS : 7 9
EGADS : 8 10
EGADS : 9 11 12
EGADS : 10 13
EGADS : 11 14
EGADS : 12 15
EGADS : 13 16
EGADS : 14 17 18
EGADS : 15 19
EGADS : 16 20
EGADS : 17 21
EGADS : 18 22
EGADS : Loop Edges Information
EGADS : Loop Active Sense Edges
EGADS : 1 Yes 1 1 2 -3 -4
EGADS : 2 Yes 1 5 6 -7 -1
EGADS : 3 Yes 1 8 9
EGADS : 4 Yes 1 -2 7 11 -10
EGADS : 5 Yes 1 -12 3 10 -13
EGADS : 6 Yes 1 -14 -15
EGADS : 7 Yes 1 4 12 -16 -5
EGADS : 8 Yes 1 -6 16 13 -11
EGADS : 9 Yes 1 -17 -8 18 14
EGADS : 10 Yes 1 17 15 -18 -9
EGADS : 11 Yes 1 -19 -20
EGADS : 12 Yes 1 21 22
EGADS : 13 Yes 1 -23 19 25 -24
EGADS : 14 Yes 1 23 -26 -25 20
EGADS : 15 Yes 1 -27 -21 28 29
EGADS : 16 Yes 1 27 30 -28 -22
EGADS : 17 Yes 1 24 26
EGADS : 18 Yes 1 -29 -30
EGADS : 19 Yes 1 -31 -32
EGADS : 20 Yes 1 -33 31 35 -34
EGADS : 21 Yes 1 33 -36 -35 32
EGADS : 22 Yes 1 34 36
EGADS : Edge Node, Scale Factor, and Neighbor-Faces Information
EGADS : ESF = Edge Scale Factor
EGADS : Not applicable for DEGENERATE Edges or Edges with a FarField
EGADS : Grid BC Neighbor Face.
EGADS : Neighbor
EGADS : Edge Body Active Node1 Node2 ESF Faces
EGADS : 1 0 Yes 2 1 1 1 2
EGADS : 2 0 Yes 1 3 1 1 3
EGADS : 3 0 Yes 4 3 1 1 4
EGADS : 4 0 Yes 2 4 1 1 5
EGADS : 5 0 Yes 2 5 1 2 5
EGADS : 6 0 Yes 5 6 1 2 6
EGADS : 7 0 Yes 1 6 1 2 3
EGADS : 8 0 Yes 7 8 1 2 7
EGADS : 9 0 Yes 8 7 1 2 8
EGADS : 10 0 Yes 3 9 1 3 4
EGADS : 11 0 Yes 6 9 1 3 6
EGADS : 12 0 Yes 4 10 1 4 5
EGADS : 13 0 Yes 10 9 1 4 6
EGADS : 14 0 Yes 11 12 1 4 7
EGADS : 15 0 Yes 12 11 1 4 8
EGADS : 16 0 Yes 5 10 1 5 6
EGADS : 17 0 Yes 8 12 1 7 8
EGADS : 18 0 Yes 7 11 1 7 8
EGADS : 19 1 Yes 13 14 1 9 10
EGADS : 20 1 Yes 14 13 1 9 11
EGADS : 21 1 Yes 15 16 1 9 12
EGADS : 22 1 Yes 16 15 1 9 13
EGADS : 23 1 Yes 13 17 1 10 11
EGADS : 24 1 Yes 17 18 1 10 14
EGADS : 25 1 Yes 14 18 1 10 11
EGADS : 26 1 Yes 18 17 1 11 14
EGADS : 27 1 Yes 16 19 1 12 13
EGADS : 28 1 Yes 15 20 1 12 13
EGADS : 29 1 Yes 20 19 1 12 14
EGADS : 30 1 Yes 19 20 1 13 14
EGADS : 31 2 Yes 21 22 1 15 16
EGADS : 32 2 Yes 22 21 1 15 17
EGADS : 33 2 Yes 21 23 1 16 17
EGADS : 34 2 Yes 23 24 1 16 18
EGADS : 35 2 Yes 22 24 1 16 17
EGADS : 36 2 Yes 24 23 1 17 18
EGADS : Node Information
EGADS : Node Active Coordinates
EGADS : 1 Yes 0 0 0.5
EGADS : 2 Yes 0 0 0
EGADS : 3 Yes 0 0.5 0.5
EGADS : 4 Yes 0 0.5 0
EGADS : 5 Yes 0.5 0 0
EGADS : 6 Yes 0.5 0 0.5
EGADS : 7 Yes 0 0 0.2
EGADS : 8 Yes 0 0 0
EGADS : 9 Yes 0.5 0.5 0.5
EGADS : 10 Yes 0.5 0.5 0
EGADS : 11 Yes 0 0.5 0.2
EGADS : 12 Yes 0 0.5 0
EGADS : 13 Yes 0 0 0
EGADS : 14 Yes 0 0 0.2
EGADS : 15 Yes 0 0 0.1
EGADS : 16 Yes 0 0 0
EGADS : 17 Yes 0 0.5 0
EGADS : 18 Yes 0 0.5 0.2
EGADS : 19 Yes 0 0.5 0
EGADS : 20 Yes 0 0.5 0.1
EGADS : 21 Yes 0 0 0
EGADS : 22 Yes 0 0 0.1
EGADS : 23 Yes 0 0.5 0
EGADS : 24 Yes 0 0.5 0.1
EGADS : Face and Edge Match Information
EGADS : Body 0 Face 7 Matches Body 1 Face 11
EGADS : Body 0 Face 8 Matches Body 1 Face 10
EGADS : Body 1 Face 12 Matches Body 2 Face 17
EGADS : Body 1 Face 13 Matches Body 2 Face 16
EGADS : Body 0 Edge 8 Matches Body 1 Edge 20
EGADS : Body 0 Edge 9 Matches Body 1 Edge 19
EGADS : Body 0 Edge 14 Matches Body 1 Edge 26
EGADS : Body 0 Edge 15 Matches Body 1 Edge 24
EGADS : Body 0 Edge 17 Matches Body 1 Edge 23
EGADS : Body 0 Edge 18 Matches Body 1 Edge 25
EGADS : Body 1 Edge 21 Matches Body 2 Edge 32
EGADS : Body 1 Edge 22 Matches Body 2 Edge 31
EGADS : Body 1 Edge 27 Matches Body 2 Edge 33
EGADS : Body 1 Edge 28 Matches Body 2 Edge 35
EGADS : Body 1 Edge 29 Matches Body 2 Edge 36
EGADS : Body 1 Edge 30 Matches Body 2 Edge 34
AFLR4 : Surface Mesh Spacing Setup
AFLR4 : Max Bounding Box Length = 1
AFLR4 : Min Bounding Box Length = 1
AFLR4 : Max Ref Bounding Box Length = 1
AFLR4 : Min Ref Bounding Box Length = 1
AFLR4 : Reference Length = 10
AFLR4 : BL Thickness = 0
AFLR4 : Abs Min Surf Spacing = 0.025
AFLR4 : Min Surf Spacing = 0.05
AFLR4 : Max Surf Spacing = 1
AFLR4 : Global Scale Factor = 1
AFLR4 : Geometry Definition Information
AFLR4 : Definition Definition Composite Grid BC
AFLR4 : ID Type ID Type
AFLR4 : 0 glue-only composite - -
AFLR4 : 1 CAD geometry 0 STD
AFLR4 : 2 CAD geometry 0 STD
AFLR4 : 3 CAD geometry 0 STD
AFLR4 : 4 CAD geometry 0 STD
AFLR4 : 5 CAD geometry 0 STD
AFLR4 : 6 CAD geometry 0 STD
AFLR4 : 7 CAD geometry 0 STD
AFLR4 : 8 CAD geometry 0 STD
AFLR4 : 9 CAD geometry 0 STD
AFLR4 : 10 CAD geometry 0 STD
AFLR4 : 11 CAD geometry 0 STD
AFLR4 : 12 CAD geometry 0 STD
AFLR4 : 13 CAD geometry 0 STD
AFLR4 : 14 CAD geometry 0 STD
AFLR4 : 15 CAD geometry 0 STD
AFLR4 : 16 CAD geometry 0 STD
AFLR4 : 17 CAD geometry 0 STD
AFLR4 : 18 CAD geometry 0 STD
AFLR4 : Define CAD surface definition 1
AFLR4 : Define CAD surface definition 2
AFLR4 : Define CAD surface definition 3
AFLR4 : Define CAD surface definition 4
AFLR4 : Define CAD surface definition 5
AFLR4 : Define CAD surface definition 6
AFLR4 : Define CAD surface definition 7
AFLR4 : Define CAD surface definition 8
AFLR4 : Define CAD surface definition 9
AFLR4 : Define CAD surface definition 10
AFLR4 : Define CAD surface definition 11
AFLR4 : Define CAD surface definition 12
AFLR4 : Define CAD surface definition 13
AFLR4 : Define CAD surface definition 14
AFLR4 : Define CAD surface definition 15
AFLR4 : Define CAD surface definition 16
AFLR4 : Define CAD surface definition 17
AFLR4 : Define CAD surface definition 18
---------------------------------------------------------------
AFLR4 : Multi-Zone Mode
AFLR4 : Zone (Body) 0
---------------------------------------------------------------
EGADS : ---------------------------------------
EGADS : Engineering Geometry Aircraft Design System
EGADS : Version 1.24
EGADS : OpenCASCADE Version 7.6.0
EGADS : ---------------------------------------
EGADS : EGADS CAD Geometry Setup
EGADS : Model has 1 Active Bodies
EGADS : Body 0 is a SolidBody
EGADS : Body 0 has 1 Shells
EGADS : Body 0 has 8 Faces
EGADS : Body 0 has 18 Edges
EGADS : Body 0 has 10 Loops
EGADS : Body 0 has 12 Nodes
EGADS : Check Grid BCs
EGADS : Grid BCs are OK
EGADS : Face Neighbor-Faces Information
EGADS : QC = Face Quad Combination Flag
EGADS : IER = Face Isolated Edge Refinement Flag
EGADS : ER = Face Edge Refinement Factor
EGADS : Not applicable for Faces with a FarField Grid BC.
EGADS : SF = Face Scale Factor
EGADS : Not applicable for Faces with a FarField Grid BC.
EGADS : Face Body QC IER ER Scale Neighbor
EGADS : ID Active ID Flag Flag Weight Factor Faces
EGADS : 1 Yes 0 0 1 0 1 2 3 4 5
EGADS : 2 Yes 0 0 1 0 1 1 3 5 6 7 8
EGADS : 3 Yes 0 0 1 0 1 1 2 4 6
EGADS : 4 Yes 0 0 1 0 1 1 3 5 6 7 8
EGADS : 5 Yes 0 0 1 0 1 1 2 4 6
EGADS : 6 Yes 0 0 1 0 1 2 3 4 5
EGADS : 7 Yes 0 0 1 0 1 2 4 8
EGADS : 8 Yes 0 0 1 0 1 2 4 7
EGADS : Face Edges Information
EGADS : Face Edges
EGADS : 1 1 2 -3 -4
EGADS : 2 5 6 -7 -1 8 9
EGADS : 3 -2 7 11 -10
EGADS : 4 -12 3 10 -13 -14 -15
EGADS : 5 4 12 -16 -5
EGADS : 6 -6 16 13 -11
EGADS : 7 -17 -8 18 14
EGADS : 8 17 15 -18 -9
EGADS : Face Loops Information
EGADS : Face Loops
EGADS : 1 1
EGADS : 2 2 3
EGADS : 3 4
EGADS : 4 5 6
EGADS : 5 7
EGADS : 6 8
EGADS : 7 9
EGADS : 8 10
EGADS : Loop Edges Information
EGADS : Loop Active Sense Edges
EGADS : 1 Yes 1 1 2 -3 -4
EGADS : 2 Yes 1 5 6 -7 -1
EGADS : 3 Yes 1 8 9
EGADS : 4 Yes 1 -2 7 11 -10
EGADS : 5 Yes 1 -12 3 10 -13
EGADS : 6 Yes 1 -14 -15
EGADS : 7 Yes 1 4 12 -16 -5
EGADS : 8 Yes 1 -6 16 13 -11
EGADS : 9 Yes 1 -17 -8 18 14
EGADS : 10 Yes 1 17 15 -18 -9
EGADS : Edge Node, Scale Factor, and Neighbor-Faces Information
EGADS : ESF = Edge Scale Factor
EGADS : Not applicable for DEGENERATE Edges or Edges with a FarField
EGADS : Grid BC Neighbor Face.
EGADS : Neighbor
EGADS : Edge Body Active Node1 Node2 ESF Faces
EGADS : 1 0 Yes 2 1 1 1 2
EGADS : 2 0 Yes 1 3 1 1 3
EGADS : 3 0 Yes 4 3 1 1 4
EGADS : 4 0 Yes 2 4 1 1 5
EGADS : 5 0 Yes 2 5 1 2 5
EGADS : 6 0 Yes 5 6 1 2 6
EGADS : 7 0 Yes 1 6 1 2 3
EGADS : 8 0 Yes 7 8 1 2 7
EGADS : 9 0 Yes 8 7 1 2 8
EGADS : 10 0 Yes 3 9 1 3 4
EGADS : 11 0 Yes 6 9 1 3 6
EGADS : 12 0 Yes 4 10 1 4 5
EGADS : 13 0 Yes 10 9 1 4 6
EGADS : 14 0 Yes 11 12 1 4 7
EGADS : 15 0 Yes 12 11 1 4 8
EGADS : 16 0 Yes 5 10 1 5 6
EGADS : 17 0 Yes 8 12 1 7 8
EGADS : 18 0 Yes 7 11 1 7 8
EGADS : Node Information
EGADS : Node Active Coordinates
EGADS : 1 Yes 0 0 0.5
EGADS : 2 Yes 0 0 0
EGADS : 3 Yes 0 0.5 0.5
EGADS : 4 Yes 0 0.5 0
EGADS : 5 Yes 0.5 0 0
EGADS : 6 Yes 0.5 0 0.5
EGADS : 7 Yes 0 0 0.2
EGADS : 8 Yes 0 0 0
EGADS : 9 Yes 0.5 0.5 0.5
EGADS : 10 Yes 0.5 0.5 0
EGADS : 11 Yes 0 0.5 0.2
EGADS : 12 Yes 0 0.5 0
EGADS : Face and Edge Match Information
EGADS : No Face Matches Found
AFLR4 : Surface Mesh Spacing Setup
AFLR4 : Max Bounding Box Length = 1
AFLR4 : Min Bounding Box Length = 1
AFLR4 : Max Ref Bounding Box Length = 1
AFLR4 : Min Ref Bounding Box Length = 1
AFLR4 : Reference Length = 10
AFLR4 : BL Thickness = 0
AFLR4 : Abs Min Surf Spacing = 0.025
AFLR4 : Min Surf Spacing = 0.05
AFLR4 : Max Surf Spacing = 1
AFLR4 : Global Scale Factor = 1
AFLR4 : Geometry Definition Information
AFLR4 : Definition Definition Composite Grid BC
AFLR4 : ID Type ID Type
AFLR4 : 0 glue-only composite - -
AFLR4 : 1 CAD geometry 0 STD
AFLR4 : 2 CAD geometry 0 STD
AFLR4 : 3 CAD geometry 0 STD
AFLR4 : 4 CAD geometry 0 STD
AFLR4 : 5 CAD geometry 0 STD
AFLR4 : 6 CAD geometry 0 STD
AFLR4 : 7 CAD geometry 0 STD
AFLR4 : 8 CAD geometry 0 STD
AFLR4 : Define CAD surface definition 1
AFLR4 : Define CAD surface definition 2
AFLR4 : Define CAD surface definition 3
AFLR4 : Define CAD surface definition 4
AFLR4 : Define CAD surface definition 5
AFLR4 : Define CAD surface definition 6
AFLR4 : Define CAD surface definition 7
AFLR4 : Define CAD surface definition 8
AFLR4 : Surface Grid Generation
AFLR4 : Generate optimal mesh on surface definition 1
AFLR2 : Nodes, Trias,Quads= 12 14 0
AFLR4 : Nodes, Trias,Quads= 8 6 0
AFLR4 : Generate optimal mesh on surface definition 2
AFLR2 : Nodes, Trias,Quads= 60 86 0
AFLR4 : Nodes, Trias,Quads= 48 62 0
AFLR4 : Generate optimal mesh on surface definition 3
AFLR2 : Nodes, Trias,Quads= 12 14 0
AFLR4 : Nodes, Trias,Quads= 8 6 0
AFLR4 : Generate optimal mesh on surface definition 4
AFLR2 : Nodes, Trias,Quads= 60 86 0
AFLR4 : Nodes, Trias,Quads= 48 62 0
AFLR4 : Generate optimal mesh on surface definition 5
AFLR2 : Nodes, Trias,Quads= 12 14 0
AFLR4 : Nodes, Trias,Quads= 8 6 0
AFLR4 : Generate optimal mesh on surface definition 6
AFLR2 : Nodes, Trias,Quads= 12 14 0
AFLR4 : Nodes, Trias,Quads= 8 6 0
AFLR4 : Generate optimal mesh on surface definition 7
AFLR2 : Nodes, Trias,Quads= 327 586 0
AFLR4 : Nodes, Trias,Quads= 325 582 0
AFLR4 : Generate optimal mesh on surface definition 8
AFLR2 : Nodes, Trias,Quads= 327 586 0
AFLR4 : Nodes, Trias,Quads= 326 584 0
DGEOM : Add surface definitions to composite definition 0
DGEOM : Glue composite surface definition 0
DGEOM : Nodes,Faces,BEdges= 657 1314 232
AFLR4 : Curvature BG Surface Grid Generation
AFLR4 : Nodes, Faces = 657 1314
AFLR4 : Surface Grid Generation
AFLR4 : Generate optimal mesh on surface definition 1
AFLR2 : Nodes, Trias,Quads= 12 14 0
AFLR4 : Nodes, Trias,Quads= 8 6 0
AFLR4 : Generate optimal mesh on surface definition 2
AFLR2 : Nodes, Trias,Quads= 60 86 0
AFLR4 : Nodes, Trias,Quads= 52 70 0
AFLR4 : Generate optimal mesh on surface definition 3
AFLR2 : Nodes, Trias,Quads= 12 14 0
AFLR4 : Nodes, Trias,Quads= 8 6 0
AFLR4 : Generate optimal mesh on surface definition 4
AFLR2 : Nodes, Trias,Quads= 60 86 0
AFLR4 : Nodes, Trias,Quads= 52 70 0
AFLR4 : Generate optimal mesh on surface definition 5
AFLR2 : Nodes, Trias,Quads= 12 14 0
AFLR4 : Nodes, Trias,Quads= 8 6 0
AFLR4 : Generate optimal mesh on surface definition 6
AFLR2 : Nodes, Trias,Quads= 12 14 0
AFLR4 : Nodes, Trias,Quads= 8 6 0
AFLR4 : Generate optimal mesh on surface definition 7
AFLR2 : Nodes, Trias,Quads= 327 586 0
AFLR4 : Nodes, Trias,Quads= 325 582 0
AFLR4 : Generate optimal mesh on surface definition 8
AFLR2 : Nodes, Trias,Quads= 327 586 0
AFLR4 : Nodes, Trias,Quads= 326 584 0
DGEOM : Add surface definitions to composite definition 0
DGEOM : Glue composite surface definition 0
DGEOM : Nodes,Faces,BEdges= 665 1330 232
OVERALL : CPU Time = 0.061 seconds
---------------------------------------------------------------
AFLR4 : Multi-Zone Mode
AFLR4 : Zone (Body) 1
---------------------------------------------------------------
EGADS : ---------------------------------------
EGADS : Engineering Geometry Aircraft Design System
EGADS : Version 1.24
EGADS : OpenCASCADE Version 7.6.0
EGADS : ---------------------------------------
EGADS : EGADS CAD Geometry Setup
EGADS : Model has 1 Active Bodies
EGADS : Body 0 is a SolidBody
EGADS : Body 0 has 1 Shells
EGADS : Body 0 has 6 Faces
EGADS : Body 0 has 12 Edges
EGADS : Body 0 has 8 Loops
EGADS : Body 0 has 8 Nodes
EGADS : Check Grid BCs
EGADS : Grid BCs are OK
EGADS : Face Neighbor-Faces Information
EGADS : QC = Face Quad Combination Flag
EGADS : IER = Face Isolated Edge Refinement Flag
EGADS : ER = Face Edge Refinement Factor
EGADS : Not applicable for Faces with a FarField Grid BC.
EGADS : SF = Face Scale Factor
EGADS : Not applicable for Faces with a FarField Grid BC.
EGADS : Face Body QC IER ER Scale Neighbor
EGADS : ID Active ID Flag Flag Weight Factor Faces
EGADS : 1 Yes 0 0 1 0 1 2 3 4 5
EGADS : 2 Yes 0 0 1 0 1 1 3 6
EGADS : 3 Yes 0 0 1 0 1 1 2 6
EGADS : 4 Yes 0 0 1 0 1 1 5 6
EGADS : 5 Yes 0 0 1 0 1 1 4 6
EGADS : 6 Yes 0 0 1 0 1 2 3 4 5
EGADS : Face Edges Information
EGADS : Face Edges
EGADS : 1 -1 -2 3 4
EGADS : 2 -5 1 7 -6
EGADS : 3 5 -8 -7 2
EGADS : 4 -9 -3 10 11
EGADS : 5 9 12 -10 -4
EGADS : 6 6 8 -11 -12
EGADS : Face Loops Information
EGADS : Face Loops
EGADS : 1 1 2
EGADS : 2 3
EGADS : 3 4
EGADS : 4 5
EGADS : 5 6
EGADS : 6 7 8
EGADS : Loop Edges Information
EGADS : Loop Active Sense Edges
EGADS : 1 Yes 1 -1 -2
EGADS : 2 Yes 1 3 4
EGADS : 3 Yes 1 -5 1 7 -6
EGADS : 4 Yes 1 5 -8 -7 2
EGADS : 5 Yes 1 -9 -3 10 11
EGADS : 6 Yes 1 9 12 -10 -4
EGADS : 7 Yes 1 6 8
EGADS : 8 Yes 1 -11 -12
EGADS : Edge Node, Scale Factor, and Neighbor-Faces Information
EGADS : ESF = Edge Scale Factor
EGADS : Not applicable for DEGENERATE Edges or Edges with a FarField
EGADS : Grid BC Neighbor Face.
EGADS : Neighbor
EGADS : Edge Body Active Node1 Node2 ESF Faces
EGADS : 1 0 Yes 1 2 1 1 2
EGADS : 2 0 Yes 2 1 1 1 3
EGADS : 3 0 Yes 3 4 1 1 4
EGADS : 4 0 Yes 4 3 1 1 5
EGADS : 5 0 Yes 1 5 1 2 3
EGADS : 6 0 Yes 5 6 1 2 6
EGADS : 7 0 Yes 2 6 1 2 3
EGADS : 8 0 Yes 6 5 1 3 6
EGADS : 9 0 Yes 4 7 1 4 5
EGADS : 10 0 Yes 3 8 1 4 5
EGADS : 11 0 Yes 8 7 1 4 6
EGADS : 12 0 Yes 7 8 1 5 6
EGADS : Node Information
EGADS : Node Active Coordinates
EGADS : 1 Yes 2.4492936e-17 0 0
EGADS : 2 Yes 0 0 0.2
EGADS : 3 Yes 0 0 0.1
EGADS : 4 Yes 1.2246468e-17 0 0
EGADS : 5 Yes 2.4492936e-17 0.5 0
EGADS : 6 Yes 0 0.5 0.2
EGADS : 7 Yes 1.2246468e-17 0.5 0
EGADS : 8 Yes 0 0.5 0.1
EGADS : Face and Edge Match Information
EGADS : No Face Matches Found
AFLR4 : Surface Mesh Spacing Setup
AFLR4 : Max Bounding Box Length = 1
AFLR4 : Min Bounding Box Length = 0.4
AFLR4 : Max Ref Bounding Box Length = 1
AFLR4 : Min Ref Bounding Box Length = 0.4
AFLR4 : Reference Length = 10
AFLR4 : BL Thickness = 0
AFLR4 : Abs Min Surf Spacing = 0.025
AFLR4 : Min Surf Spacing = 0.05
AFLR4 : Max Surf Spacing = 1
AFLR4 : Global Scale Factor = 1
AFLR4 : Geometry Definition Information
AFLR4 : Definition Definition Composite Grid BC
AFLR4 : ID Type ID Type
AFLR4 : 0 glue-only composite - -
AFLR4 : 1 CAD geometry 0 STD
AFLR4 : 2 CAD geometry 0 STD
AFLR4 : 3 CAD geometry 0 STD
AFLR4 : 4 CAD geometry 0 STD
AFLR4 : 5 CAD geometry 0 STD
AFLR4 : 6 CAD geometry 0 STD
AFLR4 : Define CAD surface definition 1
AFLR4 : Define CAD surface definition 2
AFLR4 : Define CAD surface definition 3
AFLR4 : Define CAD surface definition 4
AFLR4 : Define CAD surface definition 5
AFLR4 : Define CAD surface definition 6
AFLR4 : Surface Grid Generation
AFLR4 : Generate optimal mesh on surface definition 1
AFLR2 : Nodes, Trias,Quads= 76 110 0
AFLR4 : Nodes, Trias,Quads= 68 94 0
AFLR4 : Generate optimal mesh on surface definition 2
AFLR2 : Nodes, Trias,Quads= 327 586 0
AFLR4 : Nodes, Trias,Quads= 325 582 0
AFLR4 : Generate optimal mesh on surface definition 3
AFLR2 : Nodes, Trias,Quads= 327 586 0
AFLR4 : Nodes, Trias,Quads= 327 586 0
AFLR4 : Generate optimal mesh on surface definition 4
AFLR2 : Nodes, Trias,Quads= 181 304 0
AFLR4 : Nodes, Trias,Quads= 180 302 0
AFLR4 : Generate optimal mesh on surface definition 5
AFLR2 : Nodes, Trias,Quads= 181 304 0
AFLR4 : Nodes, Trias,Quads= 180 302 0
AFLR4 : Generate optimal mesh on surface definition 6
AFLR2 : Nodes, Trias,Quads= 76 110 0
AFLR4 : Nodes, Trias,Quads= 68 94 0
DGEOM : Add surface definitions to composite definition 0
DGEOM : Glue composite surface definition 0
DGEOM : Nodes,Faces,BEdges= 980 1960 328
AFLR4 : Curvature BG Surface Grid Generation
AFLR4 : Nodes, Faces = 980 1960
AFLR4 : Surface Grid Generation
AFLR4 : Generate optimal mesh on surface definition 1
AFLR2 : Nodes, Trias,Quads= 76 110 0
AFLR4 : Nodes, Trias,Quads= 66 90 0
AFLR4 : Generate optimal mesh on surface definition 2
AFLR2 : Nodes, Trias,Quads= 327 586 0
AFLR4 : Nodes, Trias,Quads= 325 582 0
AFLR4 : Generate optimal mesh on surface definition 3
AFLR2 : Nodes, Trias,Quads= 327 586 0
AFLR4 : Nodes, Trias,Quads= 327 586 0
AFLR4 : Generate optimal mesh on surface definition 4
AFLR2 : Nodes, Trias,Quads= 181 304 0
AFLR4 : Nodes, Trias,Quads= 181 304 0
AFLR4 : Generate optimal mesh on surface definition 5
AFLR2 : Nodes, Trias,Quads= 181 304 0
AFLR4 : Nodes, Trias,Quads= 181 304 0
AFLR4 : Generate optimal mesh on surface definition 6
AFLR2 : Nodes, Trias,Quads= 76 110 0
AFLR4 : Nodes, Trias,Quads= 66 90 0
DGEOM : Add surface definitions to composite definition 0
DGEOM : Glue composite surface definition 0
DGEOM : Nodes,Faces,BEdges= 978 1956 328
OVERALL : CPU Time = 0.051 seconds
---------------------------------------------------------------
AFLR4 : Multi-Zone Mode
AFLR4 : Zone (Body) 2
---------------------------------------------------------------
EGADS : ---------------------------------------
EGADS : Engineering Geometry Aircraft Design System
EGADS : Version 1.24
EGADS : OpenCASCADE Version 7.6.0
EGADS : ---------------------------------------
EGADS : EGADS CAD Geometry Setup
EGADS : Model has 1 Active Bodies
EGADS : Body 0 is a SolidBody
EGADS : Body 0 has 1 Shells
EGADS : Body 0 has 4 Faces
EGADS : Body 0 has 6 Edges
EGADS : Body 0 has 4 Loops
EGADS : Body 0 has 4 Nodes
EGADS : Check Grid BCs
EGADS : Grid BCs are OK
EGADS : Face Neighbor-Faces Information
EGADS : QC = Face Quad Combination Flag
EGADS : IER = Face Isolated Edge Refinement Flag
EGADS : ER = Face Edge Refinement Factor
EGADS : Not applicable for Faces with a FarField Grid BC.
EGADS : SF = Face Scale Factor
EGADS : Not applicable for Faces with a FarField Grid BC.
EGADS : Face Body QC IER ER Scale Neighbor
EGADS : ID Active ID Flag Flag Weight Factor Faces
EGADS : 1 Yes 0 0 1 0 1 2 3
EGADS : 2 Yes 0 0 1 0 1 1 3 4
EGADS : 3 Yes 0 0 1 0 1 1 2 4
EGADS : 4 Yes 0 0 1 0 1 2 3
EGADS : Face Edges Information
EGADS : Face Edges
EGADS : 1 -1 -2
EGADS : 2 -3 1 5 -4
EGADS : 3 3 -6 -5 2
EGADS : 4 4 6
EGADS : Face Loops Information
EGADS : Face Loops
EGADS : 1 1
EGADS : 2 2
EGADS : 3 3
EGADS : 4 4
EGADS : Loop Edges Information
EGADS : Loop Active Sense Edges
EGADS : 1 Yes 1 -1 -2
EGADS : 2 Yes 1 -3 1 5 -4
EGADS : 3 Yes 1 3 -6 -5 2
EGADS : 4 Yes 1 4 6
EGADS : Edge Node, Scale Factor, and Neighbor-Faces Information
EGADS : ESF = Edge Scale Factor
EGADS : Not applicable for DEGENERATE Edges or Edges with a FarField
EGADS : Grid BC Neighbor Face.
EGADS : Neighbor
EGADS : Edge Body Active Node1 Node2 ESF Faces
EGADS : 1 0 Yes 1 2 1 1 2
EGADS : 2 0 Yes 2 1 1 1 3
EGADS : 3 0 Yes 1 3 1 2 3
EGADS : 4 0 Yes 3 4 1 2 4
EGADS : 5 0 Yes 2 4 1 2 3
EGADS : 6 0 Yes 4 3 1 3 4
EGADS : Node Information
EGADS : Node Active Coordinates
EGADS : 1 Yes 1.2246468e-17 0 0
EGADS : 2 Yes 0 0 0.1
EGADS : 3 Yes 1.2246468e-17 0.5 0
EGADS : 4 Yes 0 0.5 0.1
EGADS : Face and Edge Match Information
EGADS : No Face Matches Found
AFLR4 : Surface Mesh Spacing Setup
AFLR4 : Max Bounding Box Length = 1
AFLR4 : Min Bounding Box Length = 0.2
AFLR4 : Max Ref Bounding Box Length = 1
AFLR4 : Min Ref Bounding Box Length = 0.2
AFLR4 : Reference Length = 10
AFLR4 : BL Thickness = 0
AFLR4 : Abs Min Surf Spacing = 0.025
AFLR4 : Min Surf Spacing = 0.05
AFLR4 : Max Surf Spacing = 1
AFLR4 : Global Scale Factor = 1
AFLR4 : Geometry Definition Information
AFLR4 : Definition Definition Composite Grid BC
AFLR4 : ID Type ID Type
AFLR4 : 0 glue-only composite - -
AFLR4 : 1 CAD geometry 0 STD
AFLR4 : 2 CAD geometry 0 STD
AFLR4 : 3 CAD geometry 0 STD
AFLR4 : 4 CAD geometry 0 STD
AFLR4 : Define CAD surface definition 1
AFLR4 : Define CAD surface definition 2
AFLR4 : Define CAD surface definition 3
AFLR4 : Define CAD surface definition 4
AFLR4 : Surface Grid Generation
AFLR4 : Generate optimal mesh on surface definition 1
AFLR2 : Nodes, Trias,Quads= 32 46 0
AFLR4 : Nodes, Trias,Quads= 23 28 0
AFLR4 : Generate optimal mesh on surface definition 2
AFLR2 : Nodes, Trias,Quads= 182 306 0
AFLR4 : Nodes, Trias,Quads= 180 302 0
AFLR4 : Generate optimal mesh on surface definition 3
AFLR2 : Nodes, Trias,Quads= 182 306 0
AFLR4 : Nodes, Trias,Quads= 180 302 0
AFLR4 : Generate optimal mesh on surface definition 4
AFLR2 : Nodes, Trias,Quads= 30 42 0
AFLR4 : Nodes, Trias,Quads= 23 28 0
DGEOM : Add surface definitions to composite definition 0
DGEOM : Glue composite surface definition 0
DGEOM : Nodes,Faces,BEdges= 332 660 144
AFLR4 : Curvature BG Surface Grid Generation
AFLR4 : Nodes, Faces = 332 660
AFLR4 : Surface Grid Generation
AFLR4 : Generate optimal mesh on surface definition 1
AFLR2 : Nodes, Trias,Quads= 32 46 0
AFLR4 : Nodes, Trias,Quads= 24 30 0
AFLR4 : Generate optimal mesh on surface definition 2
AFLR2 : Nodes, Trias,Quads= 182 306 0
AFLR4 : Nodes, Trias,Quads= 180 302 0
AFLR4 : Generate optimal mesh on surface definition 3
AFLR2 : Nodes, Trias,Quads= 182 306 0
AFLR4 : Nodes, Trias,Quads= 180 302 0
AFLR4 : Generate optimal mesh on surface definition 4
AFLR2 : Nodes, Trias,Quads= 30 42 0
AFLR4 : Nodes, Trias,Quads= 25 32 0
DGEOM : Add surface definitions to composite definition 0
DGEOM : Glue composite surface definition 0
DGEOM : Nodes,Faces,BEdges= 335 666 144
OVERALL : CPU Time = 0.026 seconds
---------------------------------------------------------------
EGADS : Zone (Body) 0
DGEOM : Add surface definitions to composite definition 0
DGEOM : Glue composite surface definition 0
DGEOM : Nodes,Faces,BEdges= 665 1330 232
EGADS : Zone (Body) 1
DGEOM : Add surface definitions to composite definition 0
DGEOM : Glue composite surface definition 0
DGEOM : Nodes,Faces,BEdges= 977 1954 328
EGADS : Zone (Body) 2
DGEOM : Add surface definitions to composite definition 0
DGEOM : Glue composite surface definition 0
DGEOM : Nodes,Faces,BEdges= 337 670 144
---------------------------------------------------------------
EGADS : Combine Multi-Zone Glue-Only Composites
EGADS : Nodes,Faces,BEdges= 1979 3954 704
---------------------------------------------------------------
Body 1 (of 3)
Number of nodes = 665
Number of elements = 1330
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 1330
Number of quadrilateral elements = 0
Body 2 (of 3)
Number of nodes = 977
Number of elements = 1954
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 1954
Number of quadrilateral elements = 0
Body 3 (of 3)
Number of nodes = 337
Number of elements = 670
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 670
Number of quadrilateral elements = 0
----------------------------
Total number of nodes = 1979
Total number of elements = 3954
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 5
Name = box, index = 1
Name = cyl2, index = 2
Name = box;cyl2, index = 3
Name = cyl1, index = 4
Name = box;cyl1, index = 5
Getting volume mesh
UG PARAM : SETTING INPUT PARAMETERS FROM ARGUMENT VECTOR
UG PARAM : mrecm = 3
UG PARAM : mrecqm = 3
UG PARAM : mpfrmt = 0
AFLR2 : ---------------------------------------
AFLR2 : AFLR2 LIBRARY
AFLR2 : ADVANCING-FRONT/LOCAL-RECONNECTION
AFLR2 : TRIA/QUAD GRID GENERATOR
AFLR2 : Version Number 9.14.7
AFLR2 : Version Date 07/16/23 @ 01:42PM
AFLR2 : Compile OS Darwin 22.5.0 x86_64
AFLR2 : Compile Date 07/25/23 @ 11:59AM
AFLR2 : Copyright 1994-2021, D.L. Marcum
AFLR2 : ---------------------------------------
AFLR4 : ---------------------------------------
AFLR4 : AFLR4 LIBRARY
AFLR4 : ADVANCING-FRONT/LOCAL-RECONNECTION
AFLR4 : TRIA/QUAD SURFACE GRID GENERATOR
AFLR4 : Version Number 11.5.8
AFLR4 : Version Date 07/24/23 @ 06:11PM
AFLR4 : Compile OS Darwin 22.5.0 x86_64
AFLR4 : Compile Date 07/25/23 @ 12:00PM
AFLR4 : Copyright 1994-2021, D.L. Marcum
AFLR4 : ---------------------------------------
EGADS : ---------------------------------------
EGADS : Engineering Geometry Aircraft Design System
EGADS : Version 1.24
EGADS : OpenCASCADE Version 7.6.0
EGADS : ---------------------------------------
EGADS : EGADS CAD Geometry Setup
EGADS : Model has 3 Active Bodies
EGADS : Body 0 is a SolidBody
EGADS : Body 0 has 1 Shells
EGADS : Body 0 has 8 Faces
EGADS : Body 0 has 18 Edges
EGADS : Body 0 has 10 Loops
EGADS : Body 0 has 12 Nodes
EGADS : Body 1 is a SolidBody
EGADS : Body 1 has 1 Shells
EGADS : Body 1 has 6 Faces
EGADS : Body 1 has 12 Edges
EGADS : Body 1 has 8 Loops
EGADS : Body 1 has 8 Nodes
EGADS : Body 2 is a SolidBody
EGADS : Body 2 has 1 Shells
EGADS : Body 2 has 4 Faces
EGADS : Body 2 has 6 Edges
EGADS : Body 2 has 4 Loops
EGADS : Body 2 has 4 Nodes
EGADS : Check Grid BCs
EGADS : Grid BCs are OK
EGADS : Face Neighbor-Faces Information
EGADS : QC = Face Quad Combination Flag
EGADS : IER = Face Isolated Edge Refinement Flag
EGADS : ER = Face Edge Refinement Factor
EGADS : Not applicable for Faces with a FarField Grid BC.
EGADS : SF = Face Scale Factor
EGADS : Not applicable for Faces with a FarField Grid BC.
EGADS : Face Body QC IER ER Scale Neighbor
EGADS : ID Active ID Flag Flag Weight Factor Faces
EGADS : 1 Yes 0 0 1 0 1 2 3 4 5
EGADS : 2 Yes 0 0 1 0 1 1 3 5 6 7 8
EGADS : 3 Yes 0 0 1 0 1 1 2 4 6
EGADS : 4 Yes 0 0 1 0 1 1 3 5 6 7 8
EGADS : 5 Yes 0 0 1 0 1 1 2 4 6
EGADS : 6 Yes 0 0 1 0 1 2 3 4 5
EGADS : 7 Yes 0 0 1 0 1 2 4 8
EGADS : 8 Yes 0 0 1 0 1 2 4 7
EGADS : 9 Yes 1 0 1 0 1 10 11 12 13
EGADS : 10 Yes 1 0 1 0 1 9 11 14
EGADS : 11 Yes 1 0 1 0 1 9 10 14
EGADS : 12 Yes 1 0 1 0 1 9 13 14
EGADS : 13 Yes 1 0 1 0 1 9 12 14
EGADS : 14 Yes 1 0 1 0 1 10 11 12 13
EGADS : 15 Yes 2 0 1 0 1 16 17
EGADS : 16 Yes 2 0 1 0 1 15 17 18
EGADS : 17 Yes 2 0 1 0 1 15 16 18
EGADS : 18 Yes 2 0 1 0 1 16 17
EGADS : Face Edges Information
EGADS : Face Edges
EGADS : 1 1 2 -3 -4
EGADS : 2 5 6 -7 -1 8 9
EGADS : 3 -2 7 11 -10
EGADS : 4 -12 3 10 -13 -14 -15
EGADS : 5 4 12 -16 -5
EGADS : 6 -6 16 13 -11
EGADS : 7 -17 -8 18 14
EGADS : 8 17 15 -18 -9
EGADS : 9 -19 -20 21 22
EGADS : 10 -23 19 25 -24
EGADS : 11 23 -26 -25 20
EGADS : 12 -27 -21 28 29
EGADS : 13 27 30 -28 -22
EGADS : 14 24 26 -29 -30
EGADS : 15 -31 -32
EGADS : 16 -33 31 35 -34
EGADS : 17 33 -36 -35 32
EGADS : 18 34 36
EGADS : Face Loops Information
EGADS : Face Loops
EGADS : 1 1
EGADS : 2 2 3
EGADS : 3 4
EGADS : 4 5 6
EGADS : 5 7
EGADS : 6 8
EGADS : 7 9
EGADS : 8 10
EGADS : 9 11 12
EGADS : 10 13
EGADS : 11 14
EGADS : 12 15
EGADS : 13 16
EGADS : 14 17 18
EGADS : 15 19
EGADS : 16 20
EGADS : 17 21
EGADS : 18 22
EGADS : Loop Edges Information
EGADS : Loop Active Sense Edges
EGADS : 1 Yes 1 1 2 -3 -4
EGADS : 2 Yes 1 5 6 -7 -1
EGADS : 3 Yes 1 8 9
EGADS : 4 Yes 1 -2 7 11 -10
EGADS : 5 Yes 1 -12 3 10 -13
EGADS : 6 Yes 1 -14 -15
EGADS : 7 Yes 1 4 12 -16 -5
EGADS : 8 Yes 1 -6 16 13 -11
EGADS : 9 Yes 1 -17 -8 18 14
EGADS : 10 Yes 1 17 15 -18 -9
EGADS : 11 Yes 1 -19 -20
EGADS : 12 Yes 1 21 22
EGADS : 13 Yes 1 -23 19 25 -24
EGADS : 14 Yes 1 23 -26 -25 20
EGADS : 15 Yes 1 -27 -21 28 29
EGADS : 16 Yes 1 27 30 -28 -22
EGADS : 17 Yes 1 24 26
EGADS : 18 Yes 1 -29 -30
EGADS : 19 Yes 1 -31 -32
EGADS : 20 Yes 1 -33 31 35 -34
EGADS : 21 Yes 1 33 -36 -35 32
EGADS : 22 Yes 1 34 36
EGADS : Edge Node, Scale Factor, and Neighbor-Faces Information
EGADS : ESF = Edge Scale Factor
EGADS : Not applicable for DEGENERATE Edges or Edges with a FarField
EGADS : Grid BC Neighbor Face.
EGADS : Neighbor
EGADS : Edge Body Active Node1 Node2 ESF Faces
EGADS : 1 0 Yes 2 1 1 1 2
EGADS : 2 0 Yes 1 3 1 1 3
EGADS : 3 0 Yes 4 3 1 1 4
EGADS : 4 0 Yes 2 4 1 1 5
EGADS : 5 0 Yes 2 5 1 2 5
EGADS : 6 0 Yes 5 6 1 2 6
EGADS : 7 0 Yes 1 6 1 2 3
EGADS : 8 0 Yes 7 8 1 2 7
EGADS : 9 0 Yes 8 7 1 2 8
EGADS : 10 0 Yes 3 9 1 3 4
EGADS : 11 0 Yes 6 9 1 3 6
EGADS : 12 0 Yes 4 10 1 4 5
EGADS : 13 0 Yes 10 9 1 4 6
EGADS : 14 0 Yes 11 12 1 4 7
EGADS : 15 0 Yes 12 11 1 4 8
EGADS : 16 0 Yes 5 10 1 5 6
EGADS : 17 0 Yes 8 12 1 7 8
EGADS : 18 0 Yes 7 11 1 7 8
EGADS : 19 1 Yes 13 14 1 9 10
EGADS : 20 1 Yes 14 13 1 9 11
EGADS : 21 1 Yes 15 16 1 9 12
EGADS : 22 1 Yes 16 15 1 9 13
EGADS : 23 1 Yes 13 17 1 10 11
EGADS : 24 1 Yes 17 18 1 10 14
EGADS : 25 1 Yes 14 18 1 10 11
EGADS : 26 1 Yes 18 17 1 11 14
EGADS : 27 1 Yes 16 19 1 12 13
EGADS : 28 1 Yes 15 20 1 12 13
EGADS : 29 1 Yes 20 19 1 12 14
EGADS : 30 1 Yes 19 20 1 13 14
EGADS : 31 2 Yes 21 22 1 15 16
EGADS : 32 2 Yes 22 21 1 15 17
EGADS : 33 2 Yes 21 23 1 16 17
EGADS : 34 2 Yes 23 24 1 16 18
EGADS : 35 2 Yes 22 24 1 16 17
EGADS : 36 2 Yes 24 23 1 17 18
EGADS : Node Information
EGADS : Node Active Coordinates
EGADS : 1 Yes 0 0 0.5
EGADS : 2 Yes 0 0 0
EGADS : 3 Yes 0 0.5 0.5
EGADS : 4 Yes 0 0.5 0
EGADS : 5 Yes 0.5 0 0
EGADS : 6 Yes 0.5 0 0.5
EGADS : 7 Yes 0 0 0.2
EGADS : 8 Yes 0 0 0
EGADS : 9 Yes 0.5 0.5 0.5
EGADS : 10 Yes 0.5 0.5 0
EGADS : 11 Yes 0 0.5 0.2
EGADS : 12 Yes 0 0.5 0
EGADS : 13 Yes 0 0 0
EGADS : 14 Yes 0 0 0.2
EGADS : 15 Yes 0 0 0.1
EGADS : 16 Yes 0 0 0
EGADS : 17 Yes 0 0.5 0
EGADS : 18 Yes 0 0.5 0.2
EGADS : 19 Yes 0 0.5 0
EGADS : 20 Yes 0 0.5 0.1
EGADS : 21 Yes 0 0 0
EGADS : 22 Yes 0 0 0.1
EGADS : 23 Yes 0 0.5 0
EGADS : 24 Yes 0 0.5 0.1
EGADS : Face and Edge Match Information
EGADS : Body 0 Face 7 Matches Body 1 Face 11
EGADS : Body 0 Face 8 Matches Body 1 Face 10
EGADS : Body 1 Face 12 Matches Body 2 Face 17
EGADS : Body 1 Face 13 Matches Body 2 Face 16
EGADS : Body 0 Edge 8 Matches Body 1 Edge 20
EGADS : Body 0 Edge 9 Matches Body 1 Edge 19
EGADS : Body 0 Edge 14 Matches Body 1 Edge 26
EGADS : Body 0 Edge 15 Matches Body 1 Edge 24
EGADS : Body 0 Edge 17 Matches Body 1 Edge 23
EGADS : Body 0 Edge 18 Matches Body 1 Edge 25
EGADS : Body 1 Edge 21 Matches Body 2 Edge 32
EGADS : Body 1 Edge 22 Matches Body 2 Edge 31
EGADS : Body 1 Edge 27 Matches Body 2 Edge 33
EGADS : Body 1 Edge 28 Matches Body 2 Edge 35
EGADS : Body 1 Edge 29 Matches Body 2 Edge 36
EGADS : Body 1 Edge 30 Matches Body 2 Edge 34
AFLR4 : Surface Mesh Spacing Setup
AFLR4 : Max Bounding Box Length = 1
AFLR4 : Min Bounding Box Length = 1
AFLR4 : Max Ref Bounding Box Length = 1
AFLR4 : Min Ref Bounding Box Length = 1
AFLR4 : Reference Length = 1
AFLR4 : BL Thickness = 0
AFLR4 : Abs Min Surf Spacing = 0.0025
AFLR4 : Min Surf Spacing = 0.005
AFLR4 : Max Surf Spacing = 0.1
AFLR4 : Global Scale Factor = 1
AFLR4 : Geometry Definition Information
AFLR4 : Definition Definition Composite Grid BC
AFLR4 : ID Type ID Type
AFLR4 : 0 glue-only composite - -
AFLR4 : 1 CAD geometry 0 STD
AFLR4 : 2 CAD geometry 0 STD
AFLR4 : 3 CAD geometry 0 STD
AFLR4 : 4 CAD geometry 0 STD
AFLR4 : 5 CAD geometry 0 STD
AFLR4 : 6 CAD geometry 0 STD
AFLR4 : 7 CAD geometry 0 STD
AFLR4 : 8 CAD geometry 0 STD
AFLR4 : 9 CAD geometry 0 STD
AFLR4 : 10 CAD geometry 0 STD
AFLR4 : 11 CAD geometry 0 STD
AFLR4 : 12 CAD geometry 0 STD
AFLR4 : 13 CAD geometry 0 STD
AFLR4 : 14 CAD geometry 0 STD
AFLR4 : 15 CAD geometry 0 STD
AFLR4 : 16 CAD geometry 0 STD
AFLR4 : 17 CAD geometry 0 STD
AFLR4 : 18 CAD geometry 0 STD
AFLR4 : Define CAD surface definition 1
AFLR4 : Define CAD surface definition 2
AFLR4 : Define CAD surface definition 3
AFLR4 : Define CAD surface definition 4
AFLR4 : Define CAD surface definition 5
AFLR4 : Define CAD surface definition 6
AFLR4 : Define CAD surface definition 7
AFLR4 : Define CAD surface definition 8
AFLR4 : Define CAD surface definition 9
AFLR4 : Define CAD surface definition 10
AFLR4 : Define CAD surface definition 11
AFLR4 : Define CAD surface definition 12
AFLR4 : Define CAD surface definition 13
AFLR4 : Define CAD surface definition 14
AFLR4 : Define CAD surface definition 15
AFLR4 : Define CAD surface definition 16
AFLR4 : Define CAD surface definition 17
AFLR4 : Define CAD surface definition 18
AFLR43 : INPUT SURFACE MESH FROM TESS
AFLR43 : Quad Surface Faces= 0
AFLR43 : Tria Surface Faces= 1330
AFLR43 : Nodes = 665
UG PARAM : SETTING INPUT PARAMETERS FROM ARGUMENT VECTOR
UG PARAM : mrecm = 3
UG PARAM : mrecqm = 3
UG PARAM : mpfrmt = 0
AFLR3 : ---------------------------------------
AFLR3 : AFLR3 LIBRARY
AFLR3 : ADVANCING-FRONT/LOCAL-RECONNECTION
AFLR3 : TETRAHEDRAL GRID GENERATOR
AFLR3 : Version Number 16.32.49
AFLR3 : Version Date 07/26/23 @ 12:32AM
AFLR3 : Compile OS Darwin 22.5.0 x86_64
AFLR3 : Compile Date 07/26/23 @ 01:42PM
AFLR3 : Copyright 1994-2021, D.L. Marcum
AFLR3 : ---------------------------------------
AFLR3 IC : INPUT SURFACE GRID CHECK
AFLR3 IC : Nodes, Elements = 665 0
UG3 : Boundary Conditions
UG3 : B-Face ID Boundary Condition
UG3 : 1 Solid
UG3 : 2 Solid
UG3 : 3 Solid
UG3 : 4 Solid
UG3 : 5 Solid
UG3 : 6 Solid
UG3 : 7 Solid
UG3 : 8 Solid
AFLR3 : CPU Time = 0.001 seconds
AFLR3 IG : INITIAL VOLUME GRID GENERATION
AFLR3 IG : Nodes, Elements = 665 0
AFLR3 IG : Nodes, Elements = 8 10
AFLR3 IG : Nodes, Elements = 134 884
AFLR3 IG : Nodes, Elements = 268 2011
AFLR3 IG : Nodes, Elements = 402 3268
AFLR3 IG : Nodes, Elements = 536 4587
AFLR3 IG : Nodes, Elements = 670 5817
AFLR3 IG : Nodes, Elements = 672 5830
AFLR3 IG : Nodes, Elements = 672 5822
AFLR3 IG : Nodes, Elements = 672 5895
AFLR3 IG : Nodes, Elements = 672 5809
AFLR3 IG : Nodes, Elements = 672 5881
AFLR3 IG : Nodes, Elements = 672 5879
AFLR3 IG : Nodes, Elements = 672 5783
AFLR3 IG : Nodes, Elements = 672 5868
AFLR3 IG : Nodes, Elements = 672 5798
AFLR3 IG : Nodes, Elements = 672 5869
AFLR3 IG : Nodes, Elements = 672 5867
AFLR3 IG : Nodes, Elements = 672 5800
AFLR3 IG : Nodes, Elements = 672 5871
AFLR3 IG : Nodes, Elements = 672 5800
AFLR3 IG : Nodes, Elements = 672 5868
AFLR3 IG : Nodes, Elements = 672 5867
AFLR3 IG : Nodes, Elements = 672 5800
AFLR3 IG : Nodes, Elements = 672 5871
AFLR3 IG : Nodes, Elements = 672 5802
AFLR3 IG : Nodes, Elements = 672 5867
AFLR3 IG : Nodes, Elements = 672 5865
AFLR3 IG : Nodes, Elements = 672 5800
AFLR3 IG : Nodes, Elements = 672 5832
AFLR3 IG : Nodes, Elements = 672 5775
AFLR3 IG : Nodes, Elements = 665 1625
AFLR3 IG : Nodes, Elements = 665 1628
AFLR3 IG : Nodes, Elements = 665 1586
AFLR3 IG : Nodes, Elements = 665 1575
AFLR3 : CPU Time = 0.054 seconds
AFLR3 GG : ISOTROPIC VOLUME GRID GENERATION
AFLR3 GG : Nodes, Elements = 665 1575
AFLR3 GG : Nodes, Elements = 754 1842
AFLR3 GG : Nodes, Elements = 754 2320
AFLR3 GG : Nodes, Elements = 754 2222
AFLR3 GG : Nodes, Elements = 845 2495
AFLR3 GG : Nodes, Elements = 845 2923
AFLR3 GG : Nodes, Elements = 845 2798
AFLR3 GG : Nodes, Elements = 895 2948
AFLR3 GG : Nodes, Elements = 895 3182
AFLR3 GG : Nodes, Elements = 895 3086
AFLR3 GG : Nodes, Elements = 914 3143
AFLR3 GG : Nodes, Elements = 914 3254
AFLR3 GG : Nodes, Elements = 914 3199
AFLR3 GG : Nodes, Elements = 929 3244
AFLR3 GG : Nodes, Elements = 929 3310
AFLR3 GG : Nodes, Elements = 929 3279
AFLR3 GG : Nodes, Elements = 931 3285
AFLR3 GG : Nodes, Elements = 931 3295
AFLR3 GG : Nodes, Elements = 931 3290
AFLR3 : CPU Time = 0.009 seconds
AFLR3 QI : QUALITY IMPROVEMENT
AFLR3 QI : Nodes, Elements = 931 3290
AFLR3 QI : Nodes, Elements = 931 3393
AFLR3 QI : Nodes, Elements = 931 3295
AFLR3 QI : Nodes, Elements = 931 3261
AFLR3 QI : Nodes, Elements = 931 3318
AFLR3 QI : Nodes, Elements = 931 3258
AFLR3 QI : Nodes, Elements = 931 3253
AFLR3 QI : Nodes, Elements = 931 3301
AFLR3 QI : Nodes, Elements = 931 3256
AFLR3 QI : Nodes, Elements = 931 3253
AFLR3 : CPU Time = 0.008 seconds
AFLR3 : DONE
UG3 : DIHEDRAL ANGLE CHECK
UG3 : No. Tet Elems = 3253
UG3 : Min, Max Ang = 7.435 158.7
UG3 : Average Angle = 71.1
UG3 : No. Angle>160.0 = 0
UG3 : No. Angle>179.9 = 0
UG3 : VOL CHECK
UG3 : Total-Volume = 0.875
UG3 : No. Tet Elems = 3253
UG3 : Min Vol = 8.12e-06
UG3 : Average Vol = 0.000269
UG3 : Total-Tet-Vol = 0.875
UG3 : No. Vol<TOL = 0
UG3 : Q VOL-LENGTH-RATIO CHECK
2/3 2
UG3 : Q = c * Vol / sum( L )
UG3 : 0 <= Q <= 1
UG3 : No. Tet Elems = 3253
UG3 : Min, Max Q = 0.0902 0.998
UG3 : Average Q = 0.669
UG3 : No. Q< 0.1 = 78
UG3 : No. Q< 0.01 = 0
OVERALL : CPU Time = 0.080 seconds
UG3 : DIHEDRAL ANGLE CHECK
UG3 : No. Tet Elems = 3253
UG3 : Min, Max Ang = 7.435 158.7
UG3 : Average Angle = 71.1
UG3 : No. Angle>160.0 = 0
UG3 : No. Angle>179.9 = 0
UG3 : VOL CHECK
UG3 : Total-Volume = 0.875
UG3 : No. Tet Elems = 3253
UG3 : Min Vol = 8.12e-06
UG3 : Average Vol = 0.000269
UG3 : Total-Tet-Vol = 0.875
UG3 : No. Vol<TOL = 0
UG3 : Q VOL-LENGTH-RATIO CHECK
2/3 2
UG3 : Q = c * Vol / sum( L )
UG3 : 0 <= Q <= 1
UG3 : Note that L includes scaling for BL-aspect=ratio
UG3 : No. Tet Elems = 3253
UG3 : Min, Max Q = 0.275 1
UG3 : Average Q = 0.746
UG3 : No. Q< 0.1 = 0
UG3 : No. Q< 0.01 = 0
UG3 : CPU Time = 0.000 seconds
AFLR43 : INPUT SURFACE MESH FROM TESS
AFLR43 : Quad Surface Faces= 0
AFLR43 : Tria Surface Faces= 1954
AFLR43 : Nodes = 977
UG PARAM : SETTING INPUT PARAMETERS FROM ARGUMENT VECTOR
UG PARAM : mrecm = 3
UG PARAM : mrecqm = 3
UG PARAM : mpfrmt = 0
AFLR3 IC : INPUT SURFACE GRID CHECK
AFLR3 IC : Nodes, Elements = 977 0
UG3 : Boundary Conditions
UG3 : B-Face ID Boundary Condition
UG3 : 9 Solid
UG3 : 10 Solid
UG3 : 11 Solid
UG3 : 12 Solid
UG3 : 13 Solid
UG3 : 14 Solid
AFLR3 : CPU Time = 0.002 seconds
AFLR3 IG : INITIAL VOLUME GRID GENERATION
AFLR3 IG : Nodes, Elements = 977 0
AFLR3 IG : Nodes, Elements = 8 10
AFLR3 IG : Nodes, Elements = 196 1177
AFLR3 IG : Nodes, Elements = 392 2457
AFLR3 IG : Nodes, Elements = 588 3800
AFLR3 IG : Nodes, Elements = 784 4969
AFLR3 IG : Nodes, Elements = 980 6127
AFLR3 IG : Nodes, Elements = 984 6147
AFLR3 IG : Nodes, Elements = 984 6133
AFLR3 IG : Nodes, Elements = 977 2874
AFLR3 IG : Nodes, Elements = 977 2887
AFLR3 IG : Nodes, Elements = 977 2800
AFLR3 IG : Nodes, Elements = 977 2799
AFLR3 : CPU Time = 0.015 seconds
AFLR3 GG : ISOTROPIC VOLUME GRID GENERATION
AFLR3 GG : Nodes, Elements = 977 2799
AFLR3 GG : Nodes, Elements = 1125 3243
AFLR3 GG : Nodes, Elements = 1125 3858
AFLR3 GG : Nodes, Elements = 1125 3660
AFLR3 GG : Nodes, Elements = 1214 3928
AFLR3 GG : Nodes, Elements = 1214 4324
AFLR3 GG : Nodes, Elements = 1214 4185
AFLR3 GG : Nodes, Elements = 1250 4293
AFLR3 GG : Nodes, Elements = 1250 4462
AFLR3 GG : Nodes, Elements = 1250 4404
AFLR3 : CPU Time = 0.009 seconds
AFLR3 QI : QUALITY IMPROVEMENT
AFLR3 QI : Nodes, Elements = 1250 4404
AFLR3 QI : Nodes, Elements = 1250 4425
AFLR3 QI : Nodes, Elements = 1250 4409
AFLR3 QI : Nodes, Elements = 1250 4404
AFLR3 QI : Nodes, Elements = 1250 4403
AFLR3 QI : Nodes, Elements = 1250 4402
AFLR3 : CPU Time = 0.004 seconds
AFLR3 : DONE
UG3 : DIHEDRAL ANGLE CHECK
UG3 : No. Tet Elems = 4402
UG3 : Min, Max Ang = 23.45 145.7
UG3 : Average Angle = 70.1
UG3 : No. Angle>160.0 = 0
UG3 : No. Angle>179.9 = 0
UG3 : VOL CHECK
UG3 : Total-Volume = 0.0942
UG3 : No. Tet Elems = 4402
UG3 : Min Vol = 6.14e-06
UG3 : Average Vol = 2.14e-05
UG3 : Total-Tet-Vol = 0.0942
UG3 : No. Vol<TOL = 0
UG3 : Q VOL-LENGTH-RATIO CHECK
2/3 2
UG3 : Q = c * Vol / sum( L )
UG3 : 0 <= Q <= 1
UG3 : No. Tet Elems = 4402
UG3 : Min, Max Q = 0.54 0.998
UG3 : Average Q = 0.867
UG3 : No. Q< 0.1 = 0
UG3 : No. Q< 0.01 = 0
OVERALL : CPU Time = 0.033 seconds
UG3 : DIHEDRAL ANGLE CHECK
UG3 : No. Tet Elems = 4402
UG3 : Min, Max Ang = 23.45 145.7
UG3 : Average Angle = 70.1
UG3 : No. Angle>160.0 = 0
UG3 : No. Angle>179.9 = 0
UG3 : VOL CHECK
UG3 : Total-Volume = 0.0942
UG3 : No. Tet Elems = 4402
UG3 : Min Vol = 6.14e-06
UG3 : Average Vol = 2.14e-05
UG3 : Total-Tet-Vol = 0.0942
UG3 : No. Vol<TOL = 0
UG3 : Q VOL-LENGTH-RATIO CHECK
2/3 2
UG3 : Q = c * Vol / sum( L )
UG3 : 0 <= Q <= 1
UG3 : Note that L includes scaling for BL-aspect=ratio
UG3 : No. Tet Elems = 4402
UG3 : Min, Max Q = 0.543 1
UG3 : Average Q = 0.88
UG3 : No. Q< 0.1 = 0
UG3 : No. Q< 0.01 = 0
UG3 : CPU Time = 0.000 seconds
AFLR43 : INPUT SURFACE MESH FROM TESS
AFLR43 : Quad Surface Faces= 0
AFLR43 : Tria Surface Faces= 670
AFLR43 : Nodes = 337
UG PARAM : SETTING INPUT PARAMETERS FROM ARGUMENT VECTOR
UG PARAM : mrecm = 3
UG PARAM : mrecqm = 3
UG PARAM : mpfrmt = 0
AFLR3 IC : INPUT SURFACE GRID CHECK
AFLR3 IC : Nodes, Elements = 337 0
UG3 : Boundary Conditions
UG3 : B-Face ID Boundary Condition
UG3 : 15 Solid
UG3 : 16 Solid
UG3 : 17 Solid
UG3 : 18 Solid
AFLR3 : CPU Time = 0.001 seconds
AFLR3 IG : INITIAL VOLUME GRID GENERATION
AFLR3 IG : Nodes, Elements = 337 0
AFLR3 IG : Nodes, Elements = 8 10
AFLR3 IG : Nodes, Elements = 68 383
AFLR3 IG : Nodes, Elements = 136 817
AFLR3 IG : Nodes, Elements = 204 1254
AFLR3 IG : Nodes, Elements = 272 1698
AFLR3 IG : Nodes, Elements = 340 2201
AFLR3 IG : Nodes, Elements = 344 2235
AFLR3 IG : Nodes, Elements = 344 2231
AFLR3 IG : Nodes, Elements = 337 1325
AFLR3 IG : Nodes, Elements = 337 1329
AFLR3 IG : Nodes, Elements = 337 1122
AFLR3 IG : Nodes, Elements = 337 960
AFLR3 : CPU Time = 0.006 seconds
AFLR3 GG : ISOTROPIC VOLUME GRID GENERATION
AFLR3 GG : Nodes, Elements = 337 960
AFLR3 GG : Nodes, Elements = 384 1101
AFLR3 GG : Nodes, Elements = 384 1152
AFLR3 GG : Nodes, Elements = 384 1097
AFLR3 GG : Nodes, Elements = 414 1187
AFLR3 GG : Nodes, Elements = 414 1366
AFLR3 GG : Nodes, Elements = 414 1296
AFLR3 GG : Nodes, Elements = 431 1347
AFLR3 GG : Nodes, Elements = 431 1407
AFLR3 GG : Nodes, Elements = 431 1401
AFLR3 GG : Nodes, Elements = 436 1416
AFLR3 GG : Nodes, Elements = 436 1433
AFLR3 GG : Nodes, Elements = 436 1427
AFLR3 GG : Nodes, Elements = 437 1430
AFLR3 GG : Nodes, Elements = 437 1432
AFLR3 GG : Nodes, Elements = 437 1431
AFLR3 : CPU Time = 0.004 seconds
AFLR3 QI : QUALITY IMPROVEMENT
AFLR3 QI : Nodes, Elements = 437 1431
AFLR3 QI : Nodes, Elements = 436 1425
AFLR3 QI : Nodes, Elements = 436 1430
AFLR3 QI : Nodes, Elements = 436 1425
AFLR3 QI : Nodes, Elements = 436 1416
AFLR3 QI : Nodes, Elements = 436 1418
AFLR3 QI : Nodes, Elements = 436 1416
AFLR3 : CPU Time = 0.002 seconds
AFLR3 : DONE
UG3 : DIHEDRAL ANGLE CHECK
UG3 : No. Tet Elems = 1416
UG3 : Min, Max Ang = 13.34 153.1
UG3 : Average Angle = 70.1
UG3 : No. Angle>160.0 = 0
UG3 : No. Angle>179.9 = 0
UG3 : VOL CHECK
UG3 : Total-Volume = 0.0305
UG3 : No. Tet Elems = 1416
UG3 : Min Vol = 5.3e-06
UG3 : Average Vol = 2.15e-05
UG3 : Total-Tet-Vol = 0.0305
UG3 : No. Vol<TOL = 0
UG3 : Q VOL-LENGTH-RATIO CHECK
2/3 2
UG3 : Q = c * Vol / sum( L )
UG3 : 0 <= Q <= 1
UG3 : No. Tet Elems = 1416
UG3 : Min, Max Q = 0.42 1
UG3 : Average Q = 0.854
UG3 : No. Q< 0.1 = 0
UG3 : No. Q< 0.01 = 0
OVERALL : CPU Time = 0.015 seconds
UG3 : DIHEDRAL ANGLE CHECK
UG3 : No. Tet Elems = 1416
UG3 : Min, Max Ang = 13.34 153.1
UG3 : Average Angle = 70.1
UG3 : No. Angle>160.0 = 0
UG3 : No. Angle>179.9 = 0
UG3 : VOL CHECK
UG3 : Total-Volume = 0.0305
UG3 : No. Tet Elems = 1416
UG3 : Min Vol = 5.3e-06
UG3 : Average Vol = 2.15e-05
UG3 : Total-Tet-Vol = 0.0305
UG3 : No. Vol<TOL = 0
UG3 : Q VOL-LENGTH-RATIO CHECK
2/3 2
UG3 : Q = c * Vol / sum( L )
UG3 : 0 <= Q <= 1
UG3 : Note that L includes scaling for BL-aspect=ratio
UG3 : No. Tet Elems = 1416
UG3 : Min, Max Q = 0.506 1
UG3 : Average Q = 0.866
UG3 : No. Q< 0.1 = 0
UG3 : No. Q< 0.01 = 0
UG3 : CPU Time = 0.000 seconds
EGADS : ---------------------------------------
EGADS : Engineering Geometry Aircraft Design System
EGADS : Version 1.24
EGADS : OpenCASCADE Version 7.6.0
EGADS : ---------------------------------------
EGADS : CREATE EGADS TESS FROM AFLR3 DATA
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 1
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 2
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 3
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 4
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 5
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 6
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 7
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 8
: XYZ DEVIATION > TOLERANCE AT 9 NODES ON EDGE 8
: MAX XYZ DEVIATION 0.00127988 TOLERANCE 0.000499794 AT NODE 13
: INPUT EDGE COORDINATE T 3.13519
: INPUT X,Y,Z COORDINATES 2.44929e-17, -0.5, -0.2
: EVALUATED X,Y,Z COORDINATES 0.00127988, -0.5, -0.199996
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 9
: XYZ DEVIATION > TOLERANCE AT 9 NODES ON EDGE 9
: MAX XYZ DEVIATION 0.00127988 TOLERANCE 0.000499794 AT NODE 13
: INPUT EDGE COORDINATE T 6.27679
: INPUT X,Y,Z COORDINATES -4.89859e-17, -0.5, 0.2
: EVALUATED X,Y,Z COORDINATES -0.00127988, -0.5, 0.199996
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 10
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 11
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 12
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 13
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 14
: XYZ DEVIATION > TOLERANCE AT 9 NODES ON EDGE 14
: MAX XYZ DEVIATION 0.00127988 TOLERANCE 0.000499794 AT NODE 13
: INPUT EDGE COORDINATE T 3.13519
: INPUT X,Y,Z COORDINATES 2.44929e-17, 0.5, -0.2
: EVALUATED X,Y,Z COORDINATES 0.00127988, 0.5, -0.199996
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 15
: XYZ DEVIATION > TOLERANCE AT 9 NODES ON EDGE 15
: MAX XYZ DEVIATION 0.00127988 TOLERANCE 0.000499794 AT NODE 13
: INPUT EDGE COORDINATE T 6.27679
: INPUT X,Y,Z COORDINATES -4.89859e-17, 0.5, 0.2
: EVALUATED X,Y,Z COORDINATES -0.00127988, 0.5, 0.199996
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 16
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 17
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 18
EGADS : CREATING TESSELLATION FOR BODY 0 FACE 1
EGADS : CREATING TESSELLATION FOR BODY 0 FACE 2
EGADS : CREATING TESSELLATION FOR BODY 0 FACE 3
EGADS : CREATING TESSELLATION FOR BODY 0 FACE 4
EGADS : CREATING TESSELLATION FOR BODY 0 FACE 5
EGADS : CREATING TESSELLATION FOR BODY 0 FACE 6
EGADS : CREATING TESSELLATION FOR BODY 0 FACE 7
EGADS : CREATING TESSELLATION FOR BODY 0 FACE 8
EGADS : CREATING TESSELLATION FOR BODY 1 EDGE 19
: XYZ DEVIATION > TOLERANCE AT 9 NODES ON EDGE 19
: MAX XYZ DEVIATION 0.00127988 TOLERANCE 0.000499794 AT NODE 13
: INPUT EDGE COORDINATE T 6.27679
: INPUT X,Y,Z COORDINATES -4.89859e-17, -0.5, 0.2
: EVALUATED X,Y,Z COORDINATES -0.00127988, -0.5, 0.199996
EGADS : CREATING TESSELLATION FOR BODY 1 EDGE 20
: XYZ DEVIATION > TOLERANCE AT 9 NODES ON EDGE 20
: MAX XYZ DEVIATION 0.00127988 TOLERANCE 0.000499794 AT NODE 13
: INPUT EDGE COORDINATE T 3.13519
: INPUT X,Y,Z COORDINATES 2.44929e-17, -0.5, -0.2
: EVALUATED X,Y,Z COORDINATES 0.00127988, -0.5, -0.199996
EGADS : CREATING TESSELLATION FOR BODY 1 EDGE 21
: XYZ DEVIATION > TOLERANCE AT 7 NODES ON EDGE 21
: MAX XYZ DEVIATION 0.00188897 TOLERANCE 0.000390178 AT NODE 8
: INPUT EDGE COORDINATE T 3.1227
: INPUT X,Y,Z COORDINATES 1.22465e-17, -0.5, -0.1
: EVALUATED X,Y,Z COORDINATES 0.00188888, -0.5, -0.0999822
EGADS : CREATING TESSELLATION FOR BODY 1 EDGE 22
: XYZ DEVIATION > TOLERANCE AT 7 NODES ON EDGE 22
: MAX XYZ DEVIATION 0.00188897 TOLERANCE 0.000390205 AT NODE 8
: INPUT EDGE COORDINATE T 6.2643
: INPUT X,Y,Z COORDINATES -2.44929e-17, -0.5, 0.1
: EVALUATED X,Y,Z COORDINATES -0.00188888, -0.5, 0.0999822
EGADS : CREATING TESSELLATION FOR BODY 1 EDGE 23
EGADS : CREATING TESSELLATION FOR BODY 1 EDGE 24
: XYZ DEVIATION > TOLERANCE AT 9 NODES ON EDGE 24
: MAX XYZ DEVIATION 0.00127988 TOLERANCE 0.000499794 AT NODE 13
: INPUT EDGE COORDINATE T 6.27679
: INPUT X,Y,Z COORDINATES -4.89859e-17, 0.5, 0.2
: EVALUATED X,Y,Z COORDINATES -0.00127988, 0.5, 0.199996
EGADS : CREATING TESSELLATION FOR BODY 1 EDGE 25
EGADS : CREATING TESSELLATION FOR BODY 1 EDGE 26
: XYZ DEVIATION > TOLERANCE AT 9 NODES ON EDGE 26
: MAX XYZ DEVIATION 0.00127988 TOLERANCE 0.000499794 AT NODE 13
: INPUT EDGE COORDINATE T 3.13519
: INPUT X,Y,Z COORDINATES 2.44929e-17, 0.5, -0.2
: EVALUATED X,Y,Z COORDINATES 0.00127988, 0.5, -0.199996
EGADS : CREATING TESSELLATION FOR BODY 1 EDGE 27
EGADS : CREATING TESSELLATION FOR BODY 1 EDGE 28
EGADS : CREATING TESSELLATION FOR BODY 1 EDGE 29
: XYZ DEVIATION > TOLERANCE AT 7 NODES ON EDGE 29
: MAX XYZ DEVIATION 0.00188897 TOLERANCE 0.000390178 AT NODE 8
: INPUT EDGE COORDINATE T 3.1227
: INPUT X,Y,Z COORDINATES 1.22465e-17, 0.5, -0.1
: EVALUATED X,Y,Z COORDINATES 0.00188888, 0.5, -0.0999822
EGADS : CREATING TESSELLATION FOR BODY 1 EDGE 30
: XYZ DEVIATION > TOLERANCE AT 7 NODES ON EDGE 30
: MAX XYZ DEVIATION 0.00188897 TOLERANCE 0.000390205 AT NODE 8
: INPUT EDGE COORDINATE T 6.2643
: INPUT X,Y,Z COORDINATES -2.44929e-17, 0.5, 0.1
: EVALUATED X,Y,Z COORDINATES -0.00188888, 0.5, 0.0999822
EGADS : CREATING TESSELLATION FOR BODY 1 FACE 9
EGADS : CREATING TESSELLATION FOR BODY 1 FACE 10
EGADS : CREATING TESSELLATION FOR BODY 1 FACE 11
EGADS : CREATING TESSELLATION FOR BODY 1 FACE 12
EGADS : CREATING TESSELLATION FOR BODY 1 FACE 13
EGADS : CREATING TESSELLATION FOR BODY 1 FACE 14
EGADS : CREATING TESSELLATION FOR BODY 2 EDGE 31
: XYZ DEVIATION > TOLERANCE AT 7 NODES ON EDGE 31
: MAX XYZ DEVIATION 0.00188897 TOLERANCE 0.000390205 AT NODE 8
: INPUT EDGE COORDINATE T 6.2643
: INPUT X,Y,Z COORDINATES -2.44929e-17, -0.5, 0.1
: EVALUATED X,Y,Z COORDINATES -0.00188888, -0.5, 0.0999822
EGADS : CREATING TESSELLATION FOR BODY 2 EDGE 32
: XYZ DEVIATION > TOLERANCE AT 7 NODES ON EDGE 32
: MAX XYZ DEVIATION 0.00188897 TOLERANCE 0.000390178 AT NODE 8
: INPUT EDGE COORDINATE T 3.1227
: INPUT X,Y,Z COORDINATES 1.22465e-17, -0.5, -0.1
: EVALUATED X,Y,Z COORDINATES 0.00188888, -0.5, -0.0999822
EGADS : CREATING TESSELLATION FOR BODY 2 EDGE 33
EGADS : CREATING TESSELLATION FOR BODY 2 EDGE 34
: XYZ DEVIATION > TOLERANCE AT 7 NODES ON EDGE 34
: MAX XYZ DEVIATION 0.00188897 TOLERANCE 0.000390205 AT NODE 8
: INPUT EDGE COORDINATE T 6.2643
: INPUT X,Y,Z COORDINATES -2.44929e-17, 0.5, 0.1
: EVALUATED X,Y,Z COORDINATES -0.00188888, 0.5, 0.0999822
EGADS : CREATING TESSELLATION FOR BODY 2 EDGE 35
EGADS : CREATING TESSELLATION FOR BODY 2 EDGE 36
: XYZ DEVIATION > TOLERANCE AT 7 NODES ON EDGE 36
: MAX XYZ DEVIATION 0.00188897 TOLERANCE 0.000390178 AT NODE 8
: INPUT EDGE COORDINATE T 3.1227
: INPUT X,Y,Z COORDINATES 1.22465e-17, 0.5, -0.1
: EVALUATED X,Y,Z COORDINATES 0.00188888, 0.5, -0.0999822
EGADS : CREATING TESSELLATION FOR BODY 2 FACE 15
EGADS : CREATING TESSELLATION FOR BODY 2 FACE 16
EGADS : CREATING TESSELLATION FOR BODY 2 FACE 17
EGADS : CREATING TESSELLATION FOR BODY 2 FACE 18
*** NON-FATAL EGADS ERROR 3299 ***
*** COORDINATES FOUND THAT DEVIATE FROM EGADS GEOMETRY ***
EGADS : EGADS TESS CREATED
EGADS : CHECK TESS FACE NODE MAP
EGADS : CHECKING NODE MAP FOR BODY 0 FACE 1
EGADS : CHECKING NODE MAP FOR BODY 0 FACE 2
EGADS : CHECKING NODE MAP FOR BODY 0 FACE 3
EGADS : CHECKING NODE MAP FOR BODY 0 FACE 4
EGADS : CHECKING NODE MAP FOR BODY 0 FACE 5
EGADS : CHECKING NODE MAP FOR BODY 0 FACE 6
EGADS : CHECKING NODE MAP FOR BODY 0 FACE 7
EGADS : CHECKING NODE MAP FOR BODY 0 FACE 8
EGADS : CHECKING NODE MAP FOR BODY 1 FACE 9
EGADS : CHECKING NODE MAP FOR BODY 1 FACE 10
EGADS : CHECKING NODE MAP FOR BODY 1 FACE 11
EGADS : CHECKING NODE MAP FOR BODY 1 FACE 12
EGADS : CHECKING NODE MAP FOR BODY 1 FACE 13
EGADS : CHECKING NODE MAP FOR BODY 1 FACE 14
EGADS : CHECKING NODE MAP FOR BODY 2 FACE 15
EGADS : CHECKING NODE MAP FOR BODY 2 FACE 16
EGADS : CHECKING NODE MAP FOR BODY 2 FACE 17
EGADS : CHECKING NODE MAP FOR BODY 2 FACE 18
Volume mesh:
Number of nodes = 1688
Number of elements = 9477
Number of triangles = 406
Number of quadrilatarals = 0
Number of tetrahedrals = 9071
Number of pyramids = 0
Number of prisms = 0
Number of hexahedrals = 0
Writing VTK file: volume.vtk....
Finished writing VTK file
Writing exodus file ....
Block: 'Volume_1', blk_id 1, num_entries 3253
Block: 'Volume_2', blk_id 2, num_entries 4402
Block: 'Volume_3', blk_id 3, num_entries 1416
Sideset: 'box', set_id 1, num_entries 406
Sideset: 'cyl1', set_id 2, num_entries 62
Sideset: 'cyl2', set_id 3, num_entries 180
Finished writing Exodus file
real 0m1.935s
user 0m1.702s
sys 0m0.435s
+ status=0
+ set +x
=================================================
CAPS verification (using pyCAPS) case plato_aflr_cyli_box_PyTest.py passed (as expected)
=================================================
=================================================
+ echo 'plato_aflr_airfoil_morph_PyTest.py test;'
+ tee -a /Users/jenkins/workspace/ESP_UndefinedCaps/7.6/CAPS/STRUCTURE/DARWIN64/ESP/DARWIN64/examples/regressionTest/pyCAPSlog.txt
plato_aflr_airfoil_morph_PyTest.py test;
+ python -u plato_aflr_airfoil_morph_PyTest.py -outLevel=0
+ tee -a /Users/jenkins/workspace/ESP_UndefinedCaps/7.6/CAPS/STRUCTURE/DARWIN64/ESP/DARWIN64/examples/regressionTest/pyCAPSlog.txt
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 5
Name = 2DSlice, index = 1
Name = TunnelWall, index = 2
Name = OutFlow, index = 3
Name = InFlow, index = 4
Name = Airfoil, index = 5
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 4
Name = TunnelWall, index = 1
Name = OutFlow, index = 2
Name = InFlow, index = 3
Name = Airfoil, index = 4
Getting 2D mesh for body 1 (of 1)
AFLR2 : ---------------------------------------
AFLR2 : AFLR2 LIBRARY
AFLR2 : ADVANCING-FRONT/LOCAL-RECONNECTION
AFLR2 : TRIA/QUAD GRID GENERATOR
AFLR2 : Version Number 9.14.7
AFLR2 : Version Date 07/16/23 @ 01:42PM
AFLR2 : Compile OS Darwin 22.5.0 x86_64
AFLR2 : Compile Date 07/25/23 @ 11:59AM
AFLR2 : Copyright 1994-2021, D.L. Marcum
AFLR2 : ---------------------------------------
AFLR2 IC : INPUT DATA CHECK
AFLR2 IC : Nodes, Faces = 420 0
AFLR2 : CPU Time = 0.000 seconds
AFLR2 EG : EDGE GRID RE-GENERATION
AFLR2 EG : Nodes, Edges = 420 420
AFLR2 : CPU Time = 0.000 seconds
AFLR2 IG : INITIAL GRID GENERATION
AFLR2 IG : Nodes, Faces = 0 2
AFLR2 IG : Nodes, Faces = 84 170
AFLR2 IG : Nodes, Faces = 168 338
AFLR2 IG : Nodes, Faces = 252 506
AFLR2 IG : Nodes, Faces = 336 674
AFLR2 IG : Nodes, Faces = 344 690
AFLR2 IG : Nodes, Faces = 345 692
AFLR2 IG : Nodes, Faces = 420 842
AFLR2 IG : Nodes, Faces = 424 842
AFLR2 IG : Nodes, Faces = 420 420
AFLR2 : CPU Time = 0.001 seconds
AFLR2 GG : FIELD GRID GENERATION
AFLR2 GG : Nodes, Faces = 420 420
AFLR2 GG : Nodes, Faces = 832 1244
AFLR2 GG : Nodes, Faces = 1237 2054
AFLR2 GG : Nodes, Faces = 1634 2848
AFLR2 GG : Nodes, Faces = 2032 3644
AFLR2 GG : Nodes, Faces = 2422 4424
AFLR2 GG : Nodes, Faces = 2801 5182
AFLR2 GG : Nodes, Faces = 3177 5934
AFLR2 GG : Nodes, Faces = 3550 6680
AFLR2 GG : Nodes, Faces = 3915 7410
AFLR2 GG : Nodes, Faces = 4276 8132
AFLR2 GG : Nodes, Faces = 4630 8840
AFLR2 GG : Nodes, Faces = 4978 9536
AFLR2 GG : Nodes, Faces = 5320 10220
AFLR2 GG : Nodes, Faces = 5657 10894
AFLR2 GG : Nodes, Faces = 5984 11548
AFLR2 GG : Nodes, Faces = 6308 12196
AFLR2 GG : Nodes, Faces = 6626 12832
AFLR2 GG : Nodes, Faces = 6946 13472
AFLR2 GG : Nodes, Faces = 7256 14092
AFLR2 GG : Nodes, Faces = 7561 14702
AFLR2 GG : Nodes, Faces = 7855 15290
AFLR2 GG : Nodes, Faces = 8141 15862
AFLR2 GG : Nodes, Faces = 8421 16422
AFLR2 GG : Nodes, Faces = 8695 16970
AFLR2 GG : Nodes, Faces = 8967 17514
AFLR2 GG : Nodes, Faces = 9220 18020
AFLR2 GG : Nodes, Faces = 9475 18530
AFLR2 GG : Nodes, Faces = 9726 19032
AFLR2 GG : Nodes, Faces = 9971 19522
AFLR2 GG : Nodes, Faces = 10170 19920
AFLR2 GG : Nodes, Faces = 10351 20282
AFLR2 GG : Nodes, Faces = 10525 20630
AFLR2 GG : Nodes, Faces = 10695 20970
AFLR2 GG : Nodes, Faces = 10864 21308
AFLR2 GG : Nodes, Faces = 11038 21656
AFLR2 GG : Nodes, Faces = 11205 21990
AFLR2 GG : Nodes, Faces = 11358 22296
AFLR2 GG : Nodes, Faces = 11490 22560
AFLR2 GG : Nodes, Faces = 11598 22776
AFLR2 GG : Nodes, Faces = 11695 22970
AFLR2 GG : Nodes, Faces = 11776 23132
AFLR2 GG : Nodes, Faces = 11847 23274
AFLR2 GG : Nodes, Faces = 11913 23406
AFLR2 GG : Nodes, Faces = 11970 23520
AFLR2 GG : Nodes, Faces = 12021 23622
AFLR2 GG : Nodes, Faces = 12074 23728
AFLR2 GG : Nodes, Faces = 12116 23812
AFLR2 GG : Nodes, Faces = 12157 23894
AFLR2 GG : Nodes, Faces = 12188 23956
AFLR2 GG : Nodes, Faces = 12212 24004
AFLR2 GG : Nodes, Faces = 12232 24044
AFLR2 GG : Nodes, Faces = 12242 24064
AFLR2 GG : Nodes, Faces = 12244 24068
AFLR2 : CPU Time = 0.021 seconds
AFLR2 QI : QUALITY IMPROVEMENT
AFLR2 QI : Nodes, Faces = 12244 24068
AFLR2 : CPU Time = 0.003 seconds
AFLR2 : DONE
Writing AFLR3 file ....
Finished writing AFLR3 file
Number of nodes = 12244
Number of elements = 24488
Number of tris = 24068
Number of quad = 0
Writing exodus file ....
Block: 'Block0', blk_id 1, num_entries 24068
Sideset: 'Airfoil', set_id 1, num_entries 36
Sideset: 'InFlow', set_id 2, num_entries 64
Sideset: 'OutFlow', set_id 3, num_entries 64
Sideset: 'TunnelWall', set_id 4, num_entries 256
Finished writing Exodus file
Projecting tessellation 1 (of 1) on to new body
real 0m2.792s
user 0m3.356s
sys 0m0.801s
+ status=0
+ set +x
=================================================
CAPS verification (using pyCAPS) case plato_aflr_airfoil_morph_PyTest.py passed (as expected)
=================================================
=================================================
+ echo 'plato_tetgen_table_PyTest.py test;'
+ tee -a /Users/jenkins/workspace/ESP_UndefinedCaps/7.6/CAPS/STRUCTURE/DARWIN64/ESP/DARWIN64/examples/regressionTest/pyCAPSlog.txt
plato_tetgen_table_PyTest.py test;
+ python -u plato_tetgen_table_PyTest.py -outLevel=0
+ tee -a /Users/jenkins/workspace/ESP_UndefinedCaps/7.6/CAPS/STRUCTURE/DARWIN64/ESP/DARWIN64/examples/regressionTest/pyCAPSlog.txt
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 5
Name = tableTopSide, index = 1
Name = leg0Side, index = 2
Name = leg1Side, index = 3
Name = leg2Side, index = 4
Name = leg3Side, index = 5
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 0
Getting surface mesh for body 1 (of 5)
Getting surface mesh for body 2 (of 5)
Getting surface mesh for body 3 (of 5)
Getting surface mesh for body 4 (of 5)
Getting surface mesh for body 5 (of 5)
Body 1 (of 5)
Number of nodes = 642
Number of elements = 1280
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 1280
Number of quadrilateral elements = 0
Body 2 (of 5)
Number of nodes = 1066
Number of elements = 2128
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 2128
Number of quadrilateral elements = 0
Body 3 (of 5)
Number of nodes = 1066
Number of elements = 2128
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 2128
Number of quadrilateral elements = 0
Body 4 (of 5)
Number of nodes = 1066
Number of elements = 2128
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 2128
Number of quadrilateral elements = 0
Body 5 (of 5)
Number of nodes = 1066
Number of elements = 2128
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 2128
Number of quadrilateral elements = 0
----------------------------
Total number of nodes = 4906
Total number of elements = 9792
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 5
Name = tableTopSide, index = 1
Name = leg0Side, index = 2
Name = leg1Side, index = 3
Name = leg2Side, index = 4
Name = leg3Side, index = 5
Body 1 number of surface: nodes - 642, elements - 1280
Body 2 number of surface: nodes - 1066, elements - 2128
Body 3 number of surface: nodes - 1066, elements - 2128
Body 4 number of surface: nodes - 1066, elements - 2128
Body 5 number of surface: nodes - 1066, elements - 2128
Getting volume mesh
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.02674
Creating surface mesh ...
Surface mesh seconds: 0.002591
Recovering boundaries...
Boundary recovery seconds: 0.007033
Removing exterior tetrahedra ...
Spreading region attributes.
Exterior tets removal seconds: 0.000751
Recovering Delaunayness...
Delaunay recovery seconds: 0.007391
Refining mesh...
Refinement seconds: 0.001493
Improving mesh...
Mesh improvement seconds: 0.002005
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.000555
Total running seconds: 0.048737
Statistics:
Input points: 642
Input facets: 1280
Input segments: 1920
Input holes: 0
Input regions: 1
Mesh points: 642
Mesh tetrahedra: 1722
Mesh faces: 4084
Mesh faces on exterior boundary: 1280
Mesh faces on input facets: 1280
Mesh edges on input segments: 1920
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.163153
Creating surface mesh ...
Surface mesh seconds: 0.004916
Recovering boundaries...
Boundary recovery seconds: 0.010564
Removing exterior tetrahedra ...
Warning: The 1-th region point lies outside the convex hull.
Spreading region attributes.
Exterior tets removal seconds: 0.003134
Recovering Delaunayness...
Delaunay recovery seconds: 0.047753
Refining mesh...
Refinement seconds: 0.155163
Smoothing vertices...
Mesh smoothing seconds: 0.131665
Improving mesh...
Mesh improvement seconds: 0.006075
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.00116
Total running seconds: 0.523769
Statistics:
Input points: 1066
Input facets: 2128
Input segments: 3192
Input holes: 0
Input regions: 2
Mesh points: 1307
Mesh tetrahedra: 4393
Mesh faces: 9850
Mesh faces on exterior boundary: 2128
Mesh faces on input facets: 2128
Mesh edges on input segments: 3192
Steiner points inside domain: 241
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.165994
Creating surface mesh ...
Surface mesh seconds: 0.004018
Recovering boundaries...
Boundary recovery seconds: 0.011174
Removing exterior tetrahedra ...
Warning: The 1-th region point lies outside the convex hull.
Warning: The 2-th region point lies outside the convex hull.
Spreading region attributes.
Exterior tets removal seconds: 0.003476
Recovering Delaunayness...
Delaunay recovery seconds: 0.049359
Refining mesh...
Refinement seconds: 0.152105
Smoothing vertices...
Mesh smoothing seconds: 0.128898
Improving mesh...
Mesh improvement seconds: 0.00622
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.001136
Total running seconds: 0.522521
Statistics:
Input points: 1066
Input facets: 2128
Input segments: 3192
Input holes: 0
Input regions: 3
Mesh points: 1302
Mesh tetrahedra: 4374
Mesh faces: 9812
Mesh faces on exterior boundary: 2128
Mesh faces on input facets: 2128
Mesh edges on input segments: 3192
Steiner points inside domain: 236
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.169562
Creating surface mesh ...
Surface mesh seconds: 0.003969
Recovering boundaries...
Boundary recovery seconds: 0.011209
Removing exterior tetrahedra ...
Warning: The 1-th region point lies outside the convex hull.
Warning: The 2-th region point lies outside the convex hull.
Warning: The 3-th region point lies outside the convex hull.
Spreading region attributes.
Exterior tets removal seconds: 0.003338
Recovering Delaunayness...
Delaunay recovery seconds: 0.049695
Refining mesh...
Refinement seconds: 0.155523
Smoothing vertices...
Mesh smoothing seconds: 0.129895
Improving mesh...
Mesh improvement seconds: 0.005949
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.000886
Total running seconds: 0.530171
Statistics:
Input points: 1066
Input facets: 2128
Input segments: 3192
Input holes: 0
Input regions: 4
Mesh points: 1313
Mesh tetrahedra: 4448
Mesh faces: 9960
Mesh faces on exterior boundary: 2128
Mesh faces on input facets: 2128
Mesh edges on input segments: 3192
Steiner points inside domain: 247
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.168476
Creating surface mesh ...
Surface mesh seconds: 0.004051
Recovering boundaries...
Boundary recovery seconds: 0.010928
Removing exterior tetrahedra ...
Warning: The 1-th region point lies outside the convex hull.
Warning: The 2-th region point lies outside the convex hull.
Warning: The 3-th region point lies outside the convex hull.
Warning: The 4-th region point lies outside the convex hull.
Spreading region attributes.
Exterior tets removal seconds: 0.003276
Recovering Delaunayness...
Delaunay recovery seconds: 0.048916
Refining mesh...
Refinement seconds: 0.157965
Smoothing vertices...
Mesh smoothing seconds: 0.145649
Improving mesh...
Mesh improvement seconds: 0.006317
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.001025
Total running seconds: 0.546756
Statistics:
Input points: 1066
Input facets: 2128
Input segments: 3192
Input holes: 0
Input regions: 5
Mesh points: 1306
Mesh tetrahedra: 4416
Mesh faces: 9896
Mesh faces on exterior boundary: 2128
Mesh faces on input facets: 2128
Mesh edges on input segments: 3192
Steiner points inside domain: 240
Done meshing using TetGen!
Writing VTK file: volume.vtk....
Finished writing VTK file
Writing exodus file ....
Block: 'tableTop', blk_id 1, num_entries 1722
Block: 'leg0', blk_id 2, num_entries 4393
Block: 'leg1', blk_id 3, num_entries 4374
Block: 'leg2', blk_id 4, num_entries 4448
Block: 'leg3', blk_id 5, num_entries 4416
Sideset: 'leg0Side', set_id 1, num_entries 2128
Sideset: 'leg1Side', set_id 2, num_entries 2128
Sideset: 'leg2Side', set_id 3, num_entries 2128
Sideset: 'leg3Side', set_id 4, num_entries 2128
Sideset: 'tableTopSide', set_id 5, num_entries 1280
Nodeset: 'edge', set_id 1, num_entries 17
Nodeset: 'face1', set_id 2, num_entries 99
Nodeset: 'face2', set_id 3, num_entries 99
Nodeset: 'node', set_id 4, num_entries 1
Finished writing Exodus file
real 0m4.749s
user 0m4.383s
sys 0m0.426s
+ status=0
+ set +x
=================================================
CAPS verification (using pyCAPS) case plato_tetgen_table_PyTest.py passed (as expected)
=================================================
=================================================
+ echo 'plato_tetgen_cyli_box_PyTest.py test;'
+ tee -a /Users/jenkins/workspace/ESP_UndefinedCaps/7.6/CAPS/STRUCTURE/DARWIN64/ESP/DARWIN64/examples/regressionTest/pyCAPSlog.txt
plato_tetgen_cyli_box_PyTest.py test;
+ python -u plato_tetgen_cyli_box_PyTest.py -outLevel=0
+ tee -a /Users/jenkins/workspace/ESP_UndefinedCaps/7.6/CAPS/STRUCTURE/DARWIN64/ESP/DARWIN64/examples/regressionTest/pyCAPSlog.txt
EGADS Warning: Loop 2 marked with -1
EGADS Warning: Loop 2 marked with -1
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 5
Name = box, index = 1
Name = cyl2, index = 2
Name = box;cyl2, index = 3
Name = cyl1, index = 4
Name = cyl1;box;cyl2, index = 5
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 0
Getting surface mesh for body 1 (of 1)
Body 1 (of 1)
Number of nodes = 3600
Number of elements = 7324
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 7324
Number of quadrilateral elements = 0
----------------------------
Total number of nodes = 3600
Total number of elements = 7324
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 5
Name = box, index = 1
Name = cyl2, index = 2
Name = box;cyl2, index = 3
Name = cyl1, index = 4
Name = cyl1;box;cyl2, index = 5
Number of surface: nodes - 3600, elements - 7324
Getting volume mesh
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.359822
Creating surface mesh ...
Surface mesh seconds: 0.015486
Recovering boundaries...
Boundary recovery seconds: 0.05584
Removing exterior tetrahedra ...
Warning: The 3-th region point lies outside the convex hull.
Spreading region attributes.
Exterior tets removal seconds: 0.00601
Recovering Delaunayness...
Delaunay recovery seconds: 0.297827
Refining mesh...
Refinement seconds: 0.609236
Smoothing vertices...
Mesh smoothing seconds: 0.791509
Improving mesh...
Mesh improvement seconds: 0.038563
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.00436
Total running seconds: 2.17898
Statistics:
Input points: 3600
Input facets: 7324
Input segments: 10922
Input holes: 0
Input regions: 3
Mesh points: 5637
Mesh tetrahedra: 29545
Mesh faces: 60704
Mesh faces on exterior boundary: 3228
Mesh faces on input facets: 7324
Mesh edges on input segments: 10922
Steiner points inside domain: 2037
Done meshing using TetGen!
Writing VTK file: volume.vtk....
Finished writing VTK file
Writing exodus file ....
Block: 'c', blk_id 3, num_entries 12826
Block: 'b', blk_id 2, num_entries 11151
Block: 'a', blk_id 1, num_entries 5568
Sideset: 'box', set_id 1, num_entries 3228
Sideset: 'cyl1', set_id 2, num_entries 2120
Sideset: 'cyl2', set_id 3, num_entries 2314
Finished writing Exodus file
real 0m4.840s
user 0m4.629s
sys 0m0.443s
+ status=0
+ set +x
=================================================
CAPS verification (using pyCAPS) case plato_tetgen_cyli_box_PyTest.py passed (as expected)
=================================================
=================================================
+ echo 'plato_aflr_tetgen_table_PyTest.py test;'
+ tee -a /Users/jenkins/workspace/ESP_UndefinedCaps/7.6/CAPS/STRUCTURE/DARWIN64/ESP/DARWIN64/examples/regressionTest/pyCAPSlog.txt
plato_aflr_tetgen_table_PyTest.py test;
+ python -u plato_aflr_tetgen_table_PyTest.py -outLevel=0
+ tee -a /Users/jenkins/workspace/ESP_UndefinedCaps/7.6/CAPS/STRUCTURE/DARWIN64/ESP/DARWIN64/examples/regressionTest/pyCAPSlog.txt
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 5
Name = tableTopSide, index = 1
Name = leg0Side, index = 2
Name = leg1Side, index = 3
Name = leg2Side, index = 4
Name = leg3Side, index = 5
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 0
AFLR2 : ---------------------------------------
AFLR2 : AFLR2 LIBRARY
AFLR2 : ADVANCING-FRONT/LOCAL-RECONNECTION
AFLR2 : TRIA/QUAD GRID GENERATOR
AFLR2 : Version Number 9.14.7
AFLR2 : Version Date 07/16/23 @ 01:42PM
AFLR2 : Compile OS Darwin 22.5.0 x86_64
AFLR2 : Compile Date 07/25/23 @ 11:59AM
AFLR2 : Copyright 1994-2021, D.L. Marcum
AFLR2 : ---------------------------------------
AFLR4 : ---------------------------------------
AFLR4 : AFLR4 LIBRARY
AFLR4 : ADVANCING-FRONT/LOCAL-RECONNECTION
AFLR4 : TRIA/QUAD SURFACE GRID GENERATOR
AFLR4 : Version Number 11.5.8
AFLR4 : Version Date 07/24/23 @ 06:11PM
AFLR4 : Compile OS Darwin 22.5.0 x86_64
AFLR4 : Compile Date 07/25/23 @ 12:00PM
AFLR4 : Copyright 1994-2021, D.L. Marcum
AFLR4 : ---------------------------------------
EGADS : ---------------------------------------
EGADS : Engineering Geometry Aircraft Design System
EGADS : Version 1.24
EGADS : OpenCASCADE Version 7.6.0
EGADS : ---------------------------------------
EGADS : EGADS CAD Geometry Setup
EGADS : Model has 5 Active Bodies
EGADS : Body 0 is a SolidBody
EGADS : Body 0 has 1 Shells
EGADS : Body 0 has 6 Faces
EGADS : Body 0 has 12 Edges
EGADS : Body 0 has 6 Loops
EGADS : Body 0 has 8 Nodes
EGADS : Body 1 is a SolidBody
EGADS : Body 1 has 1 Shells
EGADS : Body 1 has 4 Faces
EGADS : Body 1 has 6 Edges
EGADS : Body 1 has 4 Loops
EGADS : Body 1 has 4 Nodes
EGADS : Body 2 is a SolidBody
EGADS : Body 2 has 1 Shells
EGADS : Body 2 has 4 Faces
EGADS : Body 2 has 6 Edges
EGADS : Body 2 has 4 Loops
EGADS : Body 2 has 4 Nodes
EGADS : Body 3 is a SolidBody
EGADS : Body 3 has 1 Shells
EGADS : Body 3 has 4 Faces
EGADS : Body 3 has 6 Edges
EGADS : Body 3 has 4 Loops
EGADS : Body 3 has 4 Nodes
EGADS : Body 4 is a SolidBody
EGADS : Body 4 has 1 Shells
EGADS : Body 4 has 4 Faces
EGADS : Body 4 has 6 Edges
EGADS : Body 4 has 4 Loops
EGADS : Body 4 has 4 Nodes
EGADS : Check Grid BCs
EGADS : Grid BCs are OK
EGADS : Face Neighbor-Faces Information
EGADS : QC = Face Quad Combination Flag
EGADS : IER = Face Isolated Edge Refinement Flag
EGADS : ER = Face Edge Refinement Factor
EGADS : Not applicable for Faces with a FarField Grid BC.
EGADS : SF = Face Scale Factor
EGADS : Not applicable for Faces with a FarField Grid BC.
EGADS : Face Body QC IER ER Scale Neighbor
EGADS : ID Active ID Flag Flag Weight Factor Faces
EGADS : 1 Yes 0 0 1 0 1 3 4 5 6
EGADS : 2 Yes 0 0 1 0 1 3 4 5 6
EGADS : 3 Yes 0 0 1 0 1 1 2 5 6
EGADS : 4 Yes 0 0 1 0 1 1 2 5 6
EGADS : 5 Yes 0 0 1 0 1 1 2 3 4
EGADS : 6 Yes 0 0 1 0 1 1 2 3 4
EGADS : 7 Yes 1 0 1 0 1 8 9 10
EGADS : 8 Yes 1 0 1 0 1 7 9 10
EGADS : 9 Yes 1 0 1 0 1 7 8
EGADS : 10 Yes 1 0 1 0 1 7 8
EGADS : 11 Yes 2 0 1 0 1 12 13 14
EGADS : 12 Yes 2 0 1 0 1 11 13 14
EGADS : 13 Yes 2 0 1 0 1 11 12
EGADS : 14 Yes 2 0 1 0 1 11 12
EGADS : 15 Yes 3 0 1 0 1 16 17 18
EGADS : 16 Yes 3 0 1 0 1 15 17 18
EGADS : 17 Yes 3 0 1 0 1 15 16
EGADS : 18 Yes 3 0 1 0 1 15 16
EGADS : 19 Yes 4 0 1 0 1 20 21 22
EGADS : 20 Yes 4 0 1 0 1 19 21 22
EGADS : 21 Yes 4 0 1 0 1 19 20
EGADS : 22 Yes 4 0 1 0 1 19 20
EGADS : Face Edges Information
EGADS : Face Edges
EGADS : 1 1 2 -3 -4
EGADS : 2 -5 8 7 -6
EGADS : 3 9 5 -10 -1
EGADS : 4 -11 3 12 -7
EGADS : 5 4 11 -8 -9
EGADS : 6 -2 10 6 -12
EGADS : 7 -13 -14 15 16
EGADS : 8 17 14 -18 -16
EGADS : 9 13 18
EGADS : 10 -15 -17
EGADS : 11 -19 -20 21 22
EGADS : 12 23 20 -24 -22
EGADS : 13 19 24
EGADS : 14 -21 -23
EGADS : 15 -25 -26 27 28
EGADS : 16 29 26 -30 -28
EGADS : 17 25 30
EGADS : 18 -27 -29
EGADS : 19 -31 -32 33 34
EGADS : 20 35 32 -36 -34
EGADS : 21 31 36
EGADS : 22 -33 -35
EGADS : Face Loops Information
EGADS : Face Loops
EGADS : 1 1
EGADS : 2 2
EGADS : 3 3
EGADS : 4 4
EGADS : 5 5
EGADS : 6 6
EGADS : 7 7
EGADS : 8 8
EGADS : 9 9
EGADS : 10 10
EGADS : 11 11
EGADS : 12 12
EGADS : 13 13
EGADS : 14 14
EGADS : 15 15
EGADS : 16 16
EGADS : 17 17
EGADS : 18 18
EGADS : 19 19
EGADS : 20 20
EGADS : 21 21
EGADS : 22 22
EGADS : Loop Edges Information
EGADS : Loop Active Sense Edges
EGADS : 1 Yes 1 1 2 -3 -4
EGADS : 2 Yes 1 -5 8 7 -6
EGADS : 3 Yes 1 9 5 -10 -1
EGADS : 4 Yes 1 -11 3 12 -7
EGADS : 5 Yes 1 4 11 -8 -9
EGADS : 6 Yes 1 -2 10 6 -12
EGADS : 7 Yes 1 -13 -14 15 16
EGADS : 8 Yes 1 17 14 -18 -16
EGADS : 9 Yes 1 13 18
EGADS : 10 Yes 1 -15 -17
EGADS : 11 Yes 1 -19 -20 21 22
EGADS : 12 Yes 1 23 20 -24 -22
EGADS : 13 Yes 1 19 24
EGADS : 14 Yes 1 -21 -23
EGADS : 15 Yes 1 -25 -26 27 28
EGADS : 16 Yes 1 29 26 -30 -28
EGADS : 17 Yes 1 25 30
EGADS : 18 Yes 1 -27 -29
EGADS : 19 Yes 1 -31 -32 33 34
EGADS : 20 Yes 1 35 32 -36 -34
EGADS : 21 Yes 1 31 36
EGADS : 22 Yes 1 -33 -35
EGADS : Edge Node, Scale Factor, and Neighbor-Faces Information
EGADS : ESF = Edge Scale Factor
EGADS : Not applicable for DEGENERATE Edges or Edges with a FarField
EGADS : Grid BC Neighbor Face.
EGADS : Neighbor
EGADS : Edge Body Active Node1 Node2 ESF Faces
EGADS : 1 0 Yes 2 1 1 1 3
EGADS : 2 0 Yes 1 3 1 1 6
EGADS : 3 0 Yes 4 3 1 1 4
EGADS : 4 0 Yes 2 4 1 1 5
EGADS : 5 0 Yes 6 5 1 2 3
EGADS : 6 0 Yes 5 7 1 2 6
EGADS : 7 0 Yes 8 7 1 2 4
EGADS : 8 0 Yes 6 8 1 2 5
EGADS : 9 0 Yes 2 6 1 3 5
EGADS : 10 0 Yes 1 5 1 3 6
EGADS : 11 0 Yes 4 8 1 4 5
EGADS : 12 0 Yes 3 7 1 4 6
EGADS : 13 1 Yes 10 9 1 7 9
EGADS : 14 1 Yes 11 10 1 7 8
EGADS : 15 1 Yes 11 12 1 7 10
EGADS : 16 1 Yes 12 9 1 7 8
EGADS : 17 1 Yes 12 11 1 8 10
EGADS : 18 1 Yes 9 10 1 8 9
EGADS : 19 2 Yes 14 13 1 11 13
EGADS : 20 2 Yes 15 14 1 11 12
EGADS : 21 2 Yes 15 16 1 11 14
EGADS : 22 2 Yes 16 13 1 11 12
EGADS : 23 2 Yes 16 15 1 12 14
EGADS : 24 2 Yes 13 14 1 12 13
EGADS : 25 3 Yes 18 17 1 15 17
EGADS : 26 3 Yes 19 18 1 15 16
EGADS : 27 3 Yes 19 20 1 15 18
EGADS : 28 3 Yes 20 17 1 15 16
EGADS : 29 3 Yes 20 19 1 16 18
EGADS : 30 3 Yes 17 18 1 16 17
EGADS : 31 4 Yes 22 21 1 19 21
EGADS : 32 4 Yes 23 22 1 19 20
EGADS : 33 4 Yes 23 24 1 19 22
EGADS : 34 4 Yes 24 21 1 19 20
EGADS : 35 4 Yes 24 23 1 20 22
EGADS : 36 4 Yes 21 22 1 20 21
EGADS : Node Information
EGADS : Node Active Coordinates
EGADS : 1 Yes 0 0 0.5
EGADS : 2 Yes 0 0 0
EGADS : 3 Yes 0 0.1 0.5
EGADS : 4 Yes 0 0.1 0
EGADS : 5 Yes 0.5 0 0.5
EGADS : 6 Yes 0.5 0 0
EGADS : 7 Yes 0.5 0.1 0.5
EGADS : 8 Yes 0.5 0.1 0
EGADS : 9 Yes 0 0 0
EGADS : 10 Yes 0 0 0
EGADS : 11 Yes 0 0 0
EGADS : 12 Yes 0 0 0
EGADS : 13 Yes 0 0 0.26
EGADS : 14 Yes 0 0 0.46
EGADS : 15 Yes 0 0 0.46
EGADS : 16 Yes 0 0 0.26
EGADS : 17 Yes 0.36 0 0.26
EGADS : 18 Yes 0.36 0 0.46
EGADS : 19 Yes 0.36 0 0.46
EGADS : 20 Yes 0.36 0 0.26
EGADS : 21 Yes 0.36 0 0
EGADS : 22 Yes 0.36 0 0
EGADS : 23 Yes 0.36 0 0
EGADS : 24 Yes 0.36 0 0
EGADS : Face and Edge Match Information
EGADS : No Face Matches Found
AFLR4 : Surface Mesh Spacing Setup
AFLR4 : Max Bounding Box Length = 1
AFLR4 : Min Bounding Box Length = 0.7
AFLR4 : Max Ref Bounding Box Length = 1
AFLR4 : Min Ref Bounding Box Length = 0.7
AFLR4 : Reference Length = 1
AFLR4 : BL Thickness = 0
AFLR4 : Abs Min Surf Spacing = 0.0025
AFLR4 : Min Surf Spacing = 0.005
AFLR4 : Max Surf Spacing = 0.1
AFLR4 : Global Scale Factor = 1
AFLR4 : Geometry Definition Information
AFLR4 : Definition Definition Composite Grid BC
AFLR4 : ID Type ID Type
AFLR4 : 0 glue-only composite - -
AFLR4 : 1 CAD geometry 0 STD w/BL
AFLR4 : 2 CAD geometry 0 STD w/BL
AFLR4 : 3 CAD geometry 0 STD w/BL
AFLR4 : 4 CAD geometry 0 STD w/BL
AFLR4 : 5 CAD geometry 0 STD w/BL
AFLR4 : 6 CAD geometry 0 STD w/BL
AFLR4 : 7 CAD geometry 0 STD w/BL
AFLR4 : 8 CAD geometry 0 STD w/BL
AFLR4 : 9 CAD geometry 0 STD w/BL
AFLR4 : 10 CAD geometry 0 STD w/BL
AFLR4 : 11 CAD geometry 0 STD w/BL
AFLR4 : 12 CAD geometry 0 STD w/BL
AFLR4 : 13 CAD geometry 0 STD w/BL
AFLR4 : 14 CAD geometry 0 STD w/BL
AFLR4 : 15 CAD geometry 0 STD w/BL
AFLR4 : 16 CAD geometry 0 STD w/BL
AFLR4 : 17 CAD geometry 0 STD w/BL
AFLR4 : 18 CAD geometry 0 STD w/BL
AFLR4 : 19 CAD geometry 0 STD w/BL
AFLR4 : 20 CAD geometry 0 STD w/BL
AFLR4 : 21 CAD geometry 0 STD w/BL
AFLR4 : 22 CAD geometry 0 STD w/BL
AFLR4 : Case has 5 Proximity Checking Components
AFLR4 : Component 1 includes Definitions 1 2 3 4 5 6
AFLR4 : Component 2 includes Definitions 7 8 9 10
AFLR4 : Component 3 includes Definitions 11 12 13 14
AFLR4 : Component 4 includes Definitions 15 16 17 18
AFLR4 : Component 5 includes Definitions 19 20 21 22
AFLR4 : Define CAD surface definition 1
AFLR4 : Define CAD surface definition 2
AFLR4 : Define CAD surface definition 3
AFLR4 : Define CAD surface definition 4
AFLR4 : Define CAD surface definition 5
AFLR4 : Define CAD surface definition 6
AFLR4 : Define CAD surface definition 7
AFLR4 : Define CAD surface definition 8
AFLR4 : Define CAD surface definition 9
AFLR4 : Define CAD surface definition 10
AFLR4 : Define CAD surface definition 11
AFLR4 : Define CAD surface definition 12
AFLR4 : Define CAD surface definition 13
AFLR4 : Define CAD surface definition 14
AFLR4 : Define CAD surface definition 15
AFLR4 : Define CAD surface definition 16
AFLR4 : Define CAD surface definition 17
AFLR4 : Define CAD surface definition 18
AFLR4 : Define CAD surface definition 19
AFLR4 : Define CAD surface definition 20
AFLR4 : Define CAD surface definition 21
AFLR4 : Define CAD surface definition 22
AFLR4 : Surface Grid Generation
AFLR4 : Generate optimal mesh on surface definition 1
AFLR2 : Nodes, Trias,Quads= 49 64 0
AFLR4 : Nodes, Trias,Quads= 34 34 0
AFLR4 : Generate optimal mesh on surface definition 2
AFLR2 : Nodes, Trias,Quads= 49 64 0
AFLR4 : Nodes, Trias,Quads= 34 34 0
AFLR4 : Generate optimal mesh on surface definition 3
AFLR2 : Nodes, Trias,Quads= 229 400 0
AFLR4 : Nodes, Trias,Quads= 212 366 0
AFLR4 : Generate optimal mesh on surface definition 4
AFLR2 : Nodes, Trias,Quads= 230 402 0
AFLR4 : Nodes, Trias,Quads= 212 366 0
AFLR4 : Generate optimal mesh on surface definition 5
AFLR2 : Nodes, Trias,Quads= 49 64 0
AFLR4 : Nodes, Trias,Quads= 34 34 0
AFLR4 : Generate optimal mesh on surface definition 6
AFLR2 : Nodes, Trias,Quads= 49 64 0
AFLR4 : Nodes, Trias,Quads= 34 34 0
AFLR4 : Generate optimal mesh on surface definition 7
AFLR2 : Nodes, Trias,Quads= 2270 4354 0
AFLR4 : Nodes, Trias,Quads= 2258 4330 0
AFLR4 : Generate optimal mesh on surface definition 8
AFLR2 : Nodes, Trias,Quads= 2270 4354 0
AFLR4 : Nodes, Trias,Quads= 2259 4332 0
AFLR4 : Generate optimal mesh on surface definition 9
AFLR2 : Nodes, Trias,Quads= 515 964 0
AFLR4 : Nodes, Trias,Quads= 413 760 0
AFLR4 : Generate optimal mesh on surface definition 10
AFLR2 : Nodes, Trias,Quads= 504 942 0
AFLR4 : Nodes, Trias,Quads= 402 738 0
AFLR4 : Generate optimal mesh on surface definition 11
AFLR2 : Nodes, Trias,Quads= 2270 4354 0
AFLR4 : Nodes, Trias,Quads= 2258 4330 0
AFLR4 : Generate optimal mesh on surface definition 12
AFLR2 : Nodes, Trias,Quads= 2270 4354 0
AFLR4 : Nodes, Trias,Quads= 2259 4332 0
AFLR4 : Generate optimal mesh on surface definition 13
AFLR2 : Nodes, Trias,Quads= 515 964 0
AFLR4 : Nodes, Trias,Quads= 413 760 0
AFLR4 : Generate optimal mesh on surface definition 14
AFLR2 : Nodes, Trias,Quads= 504 942 0
AFLR4 : Nodes, Trias,Quads= 402 738 0
AFLR4 : Generate optimal mesh on surface definition 15
AFLR2 : Nodes, Trias,Quads= 2270 4354 0
AFLR4 : Nodes, Trias,Quads= 2258 4330 0
AFLR4 : Generate optimal mesh on surface definition 16
AFLR2 : Nodes, Trias,Quads= 2270 4354 0
AFLR4 : Nodes, Trias,Quads= 2259 4332 0
AFLR4 : Generate optimal mesh on surface definition 17
AFLR2 : Nodes, Trias,Quads= 515 964 0
AFLR4 : Nodes, Trias,Quads= 413 760 0
AFLR4 : Generate optimal mesh on surface definition 18
AFLR2 : Nodes, Trias,Quads= 504 942 0
AFLR4 : Nodes, Trias,Quads= 402 738 0
AFLR4 : Generate optimal mesh on surface definition 19
AFLR2 : Nodes, Trias,Quads= 2270 4354 0
AFLR4 : Nodes, Trias,Quads= 2258 4330 0
AFLR4 : Generate optimal mesh on surface definition 20
AFLR2 : Nodes, Trias,Quads= 2270 4354 0
AFLR4 : Nodes, Trias,Quads= 2259 4332 0
AFLR4 : Generate optimal mesh on surface definition 21
AFLR2 : Nodes, Trias,Quads= 515 964 0
AFLR4 : Nodes, Trias,Quads= 413 760 0
AFLR4 : Generate optimal mesh on surface definition 22
AFLR2 : Nodes, Trias,Quads= 504 942 0
AFLR4 : Nodes, Trias,Quads= 402 738 0
DGEOM : Add surface definitions to composite definition 0
DGEOM : Glue composite surface definition 0
DGEOM : Nodes,Faces,BEdges= 20764 41508 2224
AFLR4 : Curvature BG Surface Grid Generation
AFLR4 : Nodes, Faces = 20764 41508
AFLR4 : Surface Grid Generation
AFLR4 : Generate optimal mesh on surface definition 1
AFLR2 : Nodes, Trias,Quads= 46 60 0
AFLR4 : Nodes, Trias,Quads= 30 28 0
AFLR4 : Generate optimal mesh on surface definition 2
AFLR2 : Nodes, Trias,Quads= 46 60 0
AFLR4 : Nodes, Trias,Quads= 30 28 0
AFLR4 : Generate optimal mesh on surface definition 3
AFLR2 : Nodes, Trias,Quads= 201 348 0
AFLR4 : Nodes, Trias,Quads= 193 332 0
AFLR4 : Generate optimal mesh on surface definition 4
AFLR2 : Nodes, Trias,Quads= 204 354 0
AFLR4 : Nodes, Trias,Quads= 193 332 0
AFLR4 : Generate optimal mesh on surface definition 5
AFLR2 : Nodes, Trias,Quads= 46 60 0
AFLR4 : Nodes, Trias,Quads= 30 28 0
AFLR4 : Generate optimal mesh on surface definition 6
AFLR2 : Nodes, Trias,Quads= 46 60 0
AFLR4 : Nodes, Trias,Quads= 30 28 0
AFLR4 : Generate optimal mesh on surface definition 7
AFLR2 : Nodes, Trias,Quads= 2245 4304 0
AFLR4 : Nodes, Trias,Quads= 2245 4304 0
AFLR4 : Generate optimal mesh on surface definition 8
AFLR2 : Nodes, Trias,Quads= 2248 4310 0
AFLR4 : Nodes, Trias,Quads= 2247 4308 0
AFLR4 : Generate optimal mesh on surface definition 9
AFLR2 : Nodes, Trias,Quads= 496 926 0
AFLR4 : Nodes, Trias,Quads= 416 766 0
AFLR4 : Generate optimal mesh on surface definition 10
AFLR2 : Nodes, Trias,Quads= 502 938 0
AFLR4 : Nodes, Trias,Quads= 408 750 0
AFLR4 : Generate optimal mesh on surface definition 11
AFLR2 : Nodes, Trias,Quads= 2245 4304 0
AFLR4 : Nodes, Trias,Quads= 2244 4302 0
AFLR4 : Generate optimal mesh on surface definition 12
AFLR2 : Nodes, Trias,Quads= 2248 4310 0
AFLR4 : Nodes, Trias,Quads= 2248 4310 0
AFLR4 : Generate optimal mesh on surface definition 13
AFLR2 : Nodes, Trias,Quads= 496 926 0
AFLR4 : Nodes, Trias,Quads= 416 766 0
AFLR4 : Generate optimal mesh on surface definition 14
AFLR2 : Nodes, Trias,Quads= 502 938 0
AFLR4 : Nodes, Trias,Quads= 408 750 0
AFLR4 : Generate optimal mesh on surface definition 15
AFLR2 : Nodes, Trias,Quads= 2245 4304 0
AFLR4 : Nodes, Trias,Quads= 2244 4302 0
AFLR4 : Generate optimal mesh on surface definition 16
AFLR2 : Nodes, Trias,Quads= 2248 4310 0
AFLR4 : Nodes, Trias,Quads= 2247 4308 0
AFLR4 : Generate optimal mesh on surface definition 17
AFLR2 : Nodes, Trias,Quads= 496 926 0
AFLR4 : Nodes, Trias,Quads= 416 766 0
AFLR4 : Generate optimal mesh on surface definition 18
AFLR2 : Nodes, Trias,Quads= 502 938 0
AFLR4 : Nodes, Trias,Quads= 408 750 0
AFLR4 : Generate optimal mesh on surface definition 19
AFLR2 : Nodes, Trias,Quads= 2245 4304 0
AFLR4 : Nodes, Trias,Quads= 2244 4302 0
AFLR4 : Generate optimal mesh on surface definition 20
AFLR2 : Nodes, Trias,Quads= 2248 4310 0
AFLR4 : Nodes, Trias,Quads= 2249 4312 0
AFLR4 : Generate optimal mesh on surface definition 21
AFLR2 : Nodes, Trias,Quads= 496 926 0
AFLR4 : Nodes, Trias,Quads= 416 766 0
AFLR4 : Generate optimal mesh on surface definition 22
AFLR2 : Nodes, Trias,Quads= 502 938 0
AFLR4 : Nodes, Trias,Quads= 408 750 0
DGEOM : Add surface definitions to composite definition 0
DGEOM : Glue composite surface definition 0
DGEOM : Nodes,Faces,BEdges= 20654 41288 2208
AFLR4 : Proximity BG Surface Grid Generation
AFLR4 : Nodes, Trias = 21567 43114
AFLR4 : Nodes, Trias = 22451 44882
AFLR4 : Nodes, Trias = 22543 45066
AFLR4 : Surface Grid Generation
AFLR4 : Generate optimal mesh on surface definition 1
AFLR2 : Nodes, Trias,Quads= 311 517 0
AFLR4 : Nodes, Trias,Quads= 309 513 0
AFLR4 : Generate optimal mesh on surface definition 2
AFLR2 : Nodes, Trias,Quads= 313 521 0
AFLR4 : Nodes, Trias,Quads= 309 513 0
AFLR4 : Generate optimal mesh on surface definition 3
AFLR2 : Nodes, Trias,Quads= 3277 6339 0
AFLR4 : Nodes, Trias,Quads= 1431 2647 0
AFLR4 : Generate optimal mesh on surface definition 4
AFLR2 : Nodes, Trias,Quads= 1864 3566 0
AFLR4 : Nodes, Trias,Quads= 1736 3310 0
AFLR4 : Generate optimal mesh on surface definition 5
AFLR2 : Nodes, Trias,Quads= 315 525 0
AFLR4 : Nodes, Trias,Quads= 307 509 0
AFLR4 : Generate optimal mesh on surface definition 6
AFLR2 : Nodes, Trias,Quads= 318 530 0
AFLR4 : Nodes, Trias,Quads= 314 522 0
AFLR4 : Generate optimal mesh on surface definition 7
AFLR2 : Nodes, Trias,Quads= 2301 4412 0
AFLR4 : Nodes, Trias,Quads= 2273 4356 0
AFLR4 : Generate optimal mesh on surface definition 8
AFLR2 : Nodes, Trias,Quads= 2302 4414 0
AFLR4 : Nodes, Trias,Quads= 2276 4362 0
AFLR4 : Generate optimal mesh on surface definition 9
AFLR2 : Nodes, Trias,Quads= 548 1028 0
AFLR4 : Nodes, Trias,Quads= 423 778 0
AFLR4 : Generate optimal mesh on surface definition 10
AFLR2 : Nodes, Trias,Quads= 549 1030 0
AFLR4 : Nodes, Trias,Quads= 418 768 0
AFLR4 : Generate optimal mesh on surface definition 11
AFLR2 : Nodes, Trias,Quads= 2301 4412 0
AFLR4 : Nodes, Trias,Quads= 2274 4358 0
AFLR4 : Generate optimal mesh on surface definition 12
AFLR2 : Nodes, Trias,Quads= 2302 4414 0
AFLR4 : Nodes, Trias,Quads= 2273 4356 0
AFLR4 : Generate optimal mesh on surface definition 13
AFLR2 : Nodes, Trias,Quads= 548 1028 0
AFLR4 : Nodes, Trias,Quads= 423 778 0
AFLR4 : Generate optimal mesh on surface definition 14
AFLR2 : Nodes, Trias,Quads= 549 1030 0
AFLR4 : Nodes, Trias,Quads= 418 768 0
AFLR4 : Generate optimal mesh on surface definition 15
AFLR2 : Nodes, Trias,Quads= 2301 4412 0
AFLR4 : Nodes, Trias,Quads= 2271 4352 0
AFLR4 : Generate optimal mesh on surface definition 16
AFLR2 : Nodes, Trias,Quads= 2302 4414 0
AFLR4 : Nodes, Trias,Quads= 2274 4358 0
AFLR4 : Generate optimal mesh on surface definition 17
AFLR2 : Nodes, Trias,Quads= 548 1028 0
AFLR4 : Nodes, Trias,Quads= 423 778 0
AFLR4 : Generate optimal mesh on surface definition 18
AFLR2 : Nodes, Trias,Quads= 549 1030 0
AFLR4 : Nodes, Trias,Quads= 418 768 0
AFLR4 : Generate optimal mesh on surface definition 19
AFLR2 : Nodes, Trias,Quads= 2301 4412 0
AFLR4 : Nodes, Trias,Quads= 2271 4352 0
AFLR4 : Generate optimal mesh on surface definition 20
AFLR2 : Nodes, Trias,Quads= 2302 4414 0
AFLR4 : Nodes, Trias,Quads= 2276 4362 0
AFLR4 : Generate optimal mesh on surface definition 21
AFLR2 : Nodes, Trias,Quads= 548 1028 0
AFLR4 : Nodes, Trias,Quads= 423 778 0
AFLR4 : Generate optimal mesh on surface definition 22
AFLR2 : Nodes, Trias,Quads= 549 1030 0
AFLR4 : Nodes, Trias,Quads= 418 768 0
DGEOM : Add surface definitions to composite definition 0
DGEOM : Glue composite surface definition 0
DGEOM : Nodes,Faces,BEdges= 24537 49054 2818
OVERALL : CPU Time = 1.098 seconds
Body 1 (of 5)
Number of nodes = 4009
Number of elements = 8014
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 8014
Number of quadrilateral elements = 0
Body 2 (of 5)
Number of nodes = 5134
Number of elements = 10264
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 10264
Number of quadrilateral elements = 0
Body 3 (of 5)
Number of nodes = 5132
Number of elements = 10260
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 10260
Number of quadrilateral elements = 0
Body 4 (of 5)
Number of nodes = 5130
Number of elements = 10256
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 10256
Number of quadrilateral elements = 0
Body 5 (of 5)
Number of nodes = 5132
Number of elements = 10260
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 10260
Number of quadrilateral elements = 0
----------------------------
Total number of nodes = 24537
Total number of elements = 49054
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 5
Name = tableTopSide, index = 1
Name = leg0Side, index = 2
Name = leg1Side, index = 3
Name = leg2Side, index = 4
Name = leg3Side, index = 5
Body 1 number of surface: nodes - 4009, elements - 8014
Body 2 number of surface: nodes - 5134, elements - 10264
Body 3 number of surface: nodes - 5132, elements - 10260
Body 4 number of surface: nodes - 5130, elements - 10256
Body 5 number of surface: nodes - 5132, elements - 10260
Getting volume mesh
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.070174
Creating surface mesh ...
Surface mesh seconds: 0.015736
Recovering boundaries...
Boundary recovery seconds: 0.035725
Removing exterior tetrahedra ...
Spreading region attributes.
Exterior tets removal seconds: 0.006127
Recovering Delaunayness...
Delaunay recovery seconds: 0.012026
Refining mesh...
Refinement seconds: 0.118072
Smoothing vertices...
Mesh smoothing seconds: 0.18664
Improving mesh...
Mesh improvement seconds: 0.017732
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.004076
Total running seconds: 0.466753
Statistics:
Input points: 4009
Input facets: 8014
Input segments: 12021
Input holes: 0
Input regions: 1
Mesh points: 4748
Mesh tetrahedra: 15739
Mesh faces: 35485
Mesh faces on exterior boundary: 8014
Mesh faces on input facets: 8014
Mesh edges on input segments: 12021
Steiner points inside domain: 739
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.16236
Creating surface mesh ...
Surface mesh seconds: 0.022265
Recovering boundaries...
Boundary recovery seconds: 0.079563
Removing exterior tetrahedra ...
Warning: The 1-th region point lies outside the convex hull.
Spreading region attributes.
Exterior tets removal seconds: 0.042459
Recovering Delaunayness...
Delaunay recovery seconds: 0.034362
Refining mesh...
Refinement seconds: 0.372412
Smoothing vertices...
Mesh smoothing seconds: 0.374979
Improving mesh...
Mesh improvement seconds: 0.026924
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.006234
Total running seconds: 1.12211
Statistics:
Input points: 5134
Input facets: 10264
Input segments: 15396
Input holes: 0
Input regions: 2
Mesh points: 6599
Mesh tetrahedra: 23322
Mesh faces: 51776
Mesh faces on exterior boundary: 10264
Mesh faces on input facets: 10264
Mesh edges on input segments: 15396
Steiner points inside domain: 1465
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.162116
Creating surface mesh ...
Surface mesh seconds: 0.021891
Recovering boundaries...
Boundary recovery seconds: 0.078753
Removing exterior tetrahedra ...
Warning: The 1-th region point lies outside the convex hull.
Warning: The 2-th region point lies outside the convex hull.
Spreading region attributes.
Exterior tets removal seconds: 0.04185
Recovering Delaunayness...
Delaunay recovery seconds: 0.037935
Refining mesh...
Refinement seconds: 0.363024
Smoothing vertices...
Mesh smoothing seconds: 0.36212
Improving mesh...
Mesh improvement seconds: 0.027252
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.006141
Total running seconds: 1.10163
Statistics:
Input points: 5132
Input facets: 10260
Input segments: 15390
Input holes: 0
Input regions: 3
Mesh points: 6597
Mesh tetrahedra: 23258
Mesh faces: 51646
Mesh faces on exterior boundary: 10260
Mesh faces on input facets: 10260
Mesh edges on input segments: 15390
Steiner points inside domain: 1465
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.162451
Creating surface mesh ...
Surface mesh seconds: 0.020349
Recovering boundaries...
Boundary recovery seconds: 0.091778
Removing exterior tetrahedra ...
Warning: The 1-th region point lies outside the convex hull.
Warning: The 2-th region point lies outside the convex hull.
Warning: The 3-th region point lies outside the convex hull.
Spreading region attributes.
Exterior tets removal seconds: 0.046751
Recovering Delaunayness...
Delaunay recovery seconds: 0.037658
Refining mesh...
Refinement seconds: 0.381648
Smoothing vertices...
Mesh smoothing seconds: 0.392508
Improving mesh...
Mesh improvement seconds: 0.027895
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.006362
Total running seconds: 1.16785
Statistics:
Input points: 5130
Input facets: 10256
Input segments: 15384
Input holes: 0
Input regions: 4
Mesh points: 6610
Mesh tetrahedra: 23420
Mesh faces: 51968
Mesh faces on exterior boundary: 10256
Mesh faces on input facets: 10256
Mesh edges on input segments: 15384
Steiner points inside domain: 1480
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.166218
Creating surface mesh ...
Surface mesh seconds: 0.020469
Recovering boundaries...
Boundary recovery seconds: 0.080719
Removing exterior tetrahedra ...
Warning: The 1-th region point lies outside the convex hull.
Warning: The 2-th region point lies outside the convex hull.
Warning: The 3-th region point lies outside the convex hull.
Warning: The 4-th region point lies outside the convex hull.
Spreading region attributes.
Exterior tets removal seconds: 0.04487
Recovering Delaunayness...
Delaunay recovery seconds: 0.035413
Refining mesh...
Refinement seconds: 0.37856
Smoothing vertices...
Mesh smoothing seconds: 0.362983
Improving mesh...
Mesh improvement seconds: 0.026978
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.006911
Total running seconds: 1.12392
Statistics:
Input points: 5132
Input facets: 10260
Input segments: 15390
Input holes: 0
Input regions: 5
Mesh points: 6601
Mesh tetrahedra: 23353
Mesh faces: 51836
Mesh faces on exterior boundary: 10260
Mesh faces on input facets: 10260
Mesh edges on input segments: 15390
Steiner points inside domain: 1469
Done meshing using TetGen!
Writing VTK file: volume.vtk....
Finished writing VTK file
Writing exodus file ....
Block: 'tableTop', blk_id 1, num_entries 15739
Block: 'leg0', blk_id 2, num_entries 23322
Block: 'leg1', blk_id 3, num_entries 23258
Block: 'leg2', blk_id 4, num_entries 23420
Block: 'leg3', blk_id 5, num_entries 23353
Sideset: 'leg0Side', set_id 1, num_entries 10264
Sideset: 'leg1Side', set_id 2, num_entries 10260
Sideset: 'leg2Side', set_id 3, num_entries 10256
Sideset: 'leg3Side', set_id 4, num_entries 10260
Sideset: 'tableTopSide', set_id 5, num_entries 8014
Nodeset: 'edge', set_id 1, num_entries 41
Nodeset: 'face1', set_id 2, num_entries 610
Nodeset: 'face2', set_id 3, num_entries 617
Nodeset: 'node', set_id 4, num_entries 1
Finished writing Exodus file
real 0m12.455s
user 0m11.967s
sys 0m0.591s
+ status=0
+ set +x
=================================================
CAPS verification (using pyCAPS) case plato_aflr_tetgen_table_PyTest.py passed (as expected)
=================================================
=================================================
+ echo 'plato_aflr_tetgen_cyli_box_PyTest.py test;'
+ tee -a /Users/jenkins/workspace/ESP_UndefinedCaps/7.6/CAPS/STRUCTURE/DARWIN64/ESP/DARWIN64/examples/regressionTest/pyCAPSlog.txt
plato_aflr_tetgen_cyli_box_PyTest.py test;
+ python -u plato_aflr_tetgen_cyli_box_PyTest.py -outLevel=0
+ tee -a /Users/jenkins/workspace/ESP_UndefinedCaps/7.6/CAPS/STRUCTURE/DARWIN64/ESP/DARWIN64/examples/regressionTest/pyCAPSlog.txt
Traceback (most recent call last):
File "/Users/jenkins/workspace/ESP_UndefinedCaps/7.6/CAPS/STRUCTURE/DARWIN64/ESP/DARWIN64/examples/pyCAPS/plato_aflr_tetgen_cyli_box_PyTest.py", line 20, in <module>
problem = pyCAPS.Problem(problemName = os.path.join(str(args.workDir[0]), "PlatoAFLRTetGenCyliBoxTest"),
File "/Users/jenkins/workspace/ESP_UndefinedCaps/7.6/CAPS/STRUCTURE/DARWIN64/CAPS/pyCAPS/pyCAPS/problem.py", line 449, in __init__
problemObj = caps.open(problemName, phaseName, flag, ptr, outLevel)
File "/Users/jenkins/workspace/ESP_UndefinedCaps/7.6/CAPS/STRUCTURE/DARWIN64/CAPS/pyCAPS/pyCAPS/caps.py", line 1123, in open
_raiseStatus(stat, msg=msg, errors=capsErrs(nErr, errs))
File "/Users/jenkins/workspace/ESP_UndefinedCaps/7.6/CAPS/STRUCTURE/DARWIN64/CAPS/pyCAPS/pyCAPS/caps.py", line 822, in _raiseStatus
raise CAPSError(status, msg=msg, errors=errors)
pyCAPS.caps.CAPSError: CAPS_NOTFOUND: Failed to open Problem with prName='./PlatoAFLRTetGenCyliBoxTest', phName=None, flag=0, and ptr='../csmData/cyli_box1.csm':
================================================================================
================================================================================
real 0m0.694s
user 0m0.670s
sys 0m0.139s
+ status=1
+ set +x
=================================================
CAPS verification (using pyCAPS) case plato_aflr_tetgen_cyli_box_PyTest.py failed (as NOT expected)
=================================================
*************************************************
*************************************************
=================================================
Did not run examples for:
Nastran
Mystran
=================================================
=================================================
Summary of examples NOT finished as expected
plato_aflr_table_PyTest.py
plato_aflr_table_morph_PyTest.py
plato_aflr_tetgen_cyli_box_PyTest.py
See pyCAPSlog.txt for more details.
=================================================
=================================================
=================================================
++ true
[GNU C Compiler (gcc)] Parsing console log (workspace: '/Users/jenkins/workspace/ESP_UndefinedCaps/7.6/CAPS/STRUCTURE/DARWIN64')
[GNU C Compiler (gcc)] Successfully parsed console log
[GNU C Compiler (gcc)] -> found 0 issues (skipped 0 duplicates)
[GNU C Compiler (gcc)] Skipping post processing
[GNU C Compiler (gcc)] No filter has been set, publishing all 0 issues
[GNU C Compiler (gcc)] Repository miner is not configured, skipping repository mining
[Clang] Parsing console log (workspace: '/Users/jenkins/workspace/ESP_UndefinedCaps/7.6/CAPS/STRUCTURE/DARWIN64')
[Clang] -> found 0 issues (skipped 0 duplicates)
[Clang] Parsing console log (workspace: '/Users/jenkins/workspace/ESP_UndefinedCaps/7.6/CAPS/STRUCTURE/DARWIN64')
[Clang] -> found 0 issues (skipped 0 duplicates)
[Clang] Successfully parsed console log
[Clang] -> found 0 issues (skipped 0 duplicates)
[Clang] Parsing console log (workspace: '/Users/jenkins/workspace/ESP_UndefinedCaps/7.6/CAPS/STRUCTURE/DARWIN64')
[Clang] Skipping post processing
[Clang] No filter has been set, publishing all 0 issues
[Clang] Repository miner is not configured, skipping repository mining
[Static Analysis] Successfully parsed console log
[Static Analysis] -> found 0 issues (skipped 0 duplicates)
[Static Analysis] Parsing console log (workspace: '/Users/jenkins/workspace/ESP_UndefinedCaps/7.6/CAPS/STRUCTURE/DARWIN64')
[Static Analysis] Successfully parsed console log
[Static Analysis] -> found 0 issues (skipped 0 duplicates)
[Static Analysis] Skipping post processing
[Static Analysis] No filter has been set, publishing all 0 issues
[Static Analysis] Repository miner is not configured, skipping repository mining
[Static Analysis] Successfully parsed console log
[Static Analysis] -> found 0 issues (skipped 0 duplicates)
[Static Analysis] Successfully parsed console log
[Static Analysis] -> found 0 issues (skipped 0 duplicates)
[Static Analysis] Successfully parsed console log
[Static Analysis] -> found 0 issues (skipped 0 duplicates)
[Static Analysis] Parsing console log (workspace: '/Users/jenkins/workspace/ESP_UndefinedCaps/7.6/CAPS/STRUCTURE/DARWIN64')
[Static Analysis] Skipping post processing
[Static Analysis] No filter has been set, publishing all 0 issues
[Static Analysis] Repository miner is not configured, skipping repository mining
[Static Analysis] Reference build recorder is not configured
[Static Analysis] Obtaining reference build from same job (7.6,CAPS/STRUCTURE,DARWIN64,macys)
[Static Analysis] Using reference build 'ESP_UndefinedCaps/CASREV=7.6,ESPTEST=CAPS/STRUCTURE,ESP_ARCH=DARWIN64,buildnode=macys #183' to compute new, fixed, and outstanding issues
[Static Analysis] Issues delta (vs. reference build): outstanding: 0, new: 0, fixed: 0
[Static Analysis] Evaluating quality gates
[Static Analysis] -> PASSED - Total (any severity): 0 - Quality Gate: 1
[Static Analysis] -> All quality gates have been passed
[Static Analysis] Health report is disabled - skipping
[Static Analysis] Created analysis result for 0 issues (found 0 new issues, fixed 0 issues)
[Static Analysis] Attaching ResultAction with ID 'analysis' to build 'ESP_UndefinedCaps/CASREV=7.6,ESPTEST=CAPS/STRUCTURE,ESP_ARCH=DARWIN64,buildnode=macys #185'.
[Checks API] No suitable checks publisher found.
Build step 'Console output (build log) parsing' changed build result to FAILURE
[PostBuildScript] - [INFO] Executing post build scripts.
[PostBuildScript] - [INFO] build step #0 should only be executed on MATRIX
[WS-CLEANUP] Deleting project workspace...
[WS-CLEANUP] Skipped based on build state FAILURE
Finished: FAILURE