Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - plateWidth
Number of design variable relations - 0
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
CAPS Info: Sensitivity FD step 1.000000e-05 used for: plateWidth[1,1]
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - plateWidth
Number of design variable relations - 0
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
CAPS Info: Sensitivity FD step 1.000000e-05 used for: plateWidth[1,1]
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - plateWidth
Number of design variable relations - 0
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
CAPS Info: Sensitivity FD step 1.000000e-05 used for: plateWidth[1,1]
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - plateWidth
Number of design variable relations - 0
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
CAPS Info: Sensitivity FD step 1.000000e-05 used for: plateWidth[1,1]
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - plateWidth
Number of design variable relations - 0
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
CAPS Info: Sensitivity FD step 1.000000e-05 used for: plateWidth[1,1]
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - plateWidth
Number of design variable relations - 0
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
CAPS Info: Sensitivity FD step 1.000000e-05 used for: plateWidth[1,1]
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - plateWidth
Number of design variable relations - 0
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
CAPS Info: Sensitivity FD step 1.000000e-05 used for: plateWidth[1,1]
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - plateWidth
Number of design variable relations - 0
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
CAPS Info: Sensitivity FD step 1.000000e-05 used for: plateWidth[1,1]
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - plateWidth
Number of design variable relations - 0
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
CAPS Info: Sensitivity FD step 1.000000e-05 used for: plateWidth[1,1]
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - plateWidth
Number of design variable relations - 0
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
CAPS Info: Sensitivity FD step 1.000000e-05 used for: plateWidth[1,1]
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - plateWidth
Number of design variable relations - 0
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
CAPS Info: Sensitivity FD step 1.000000e-05 used for: plateWidth[1,1]
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - plateWidth
Number of design variable relations - 0
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
CAPS Info: Sensitivity FD step 1.000000e-05 used for: plateWidth[1,1]
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - plateWidth
Number of design variable relations - 0
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
CAPS Info: Sensitivity FD step 1.000000e-05 used for: plateWidth[1,1]
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - plateWidth
Number of design variable relations - 0
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
CAPS Info: Sensitivity FD step 1.000000e-05 used for: plateWidth[1,1]
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - plateWidth
Number of design variable relations - 0
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
CAPS Info: Sensitivity FD step 1.000000e-05 used for: plateWidth[1,1]
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - plateWidth
Number of design variable relations - 0
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
CAPS Info: Sensitivity FD step 1.000000e-05 used for: plateWidth[1,1]
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
.ERROR:: BAD STATUS = -276 from matsol (called from solveSketchOrig:58043)
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 7
Name = box, index = 1
Name = cylinder, index = 2
Name = cone, index = 3
Name = torus, index = 4
Name = sphere, index = 5
Name = boxhole, index = 6
Name = bullet, index = 7
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 1
Name = box, index = 1
Getting surface mesh for body 1 (of 7)
Getting surface mesh for body 2 (of 7)
Getting surface mesh for body 3 (of 7)
Getting surface mesh for body 4 (of 7)
Getting surface mesh for body 5 (of 7)
Getting surface mesh for body 6 (of 7)
1F2D41B40 EGADS Info: Face #3 -> Edge #9 (9) Internally in Loop 4 7, sen = -1!
16FABF000 EGADS Info: Face #5 -> Edge #17 (9) Internally in Loop 7 4, sen = -1!
1F2D41B40 EGADS Info: Face #3 -> Edge #9 (9) Internally in Loop 7 4, sen = 1!
16FABF000 EGADS Info: Face #5 -> Edge #17 (9) Internally in Loop 4 7, sen = 1!
Getting surface mesh for body 7 (of 7)
Body 1 (of 7)
Number of nodes = 98
Number of elements = 192
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 192
Number of quadrilateral elements = 0
Body 2 (of 7)
Number of nodes = 298
Number of elements = 592
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 592
Number of quadrilateral elements = 0
Body 3 (of 7)
Number of nodes = 488
Number of elements = 972
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 972
Number of quadrilateral elements = 0
Warning: No capsGroup/capsIgnore attribute found on edge 1 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 2 of face 1, unable to assign a boundary index value
Body 4 (of 7)
Number of nodes = 2048
Number of elements = 4096
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 4096
Number of quadrilateral elements = 0
Body 5 (of 7)
Number of nodes = 152
Number of elements = 300
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 300
Number of quadrilateral elements = 0
Body 6 (of 7)
Number of nodes = 624
Number of elements = 1248
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 1248
Number of quadrilateral elements = 0
Body 7 (of 7)
Number of nodes = 489
Number of elements = 974
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 974
Number of quadrilateral elements = 0
----------------------------
Total number of nodes = 4197
Total number of elements = 8374
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 7
Name = box, index = 1
Name = cylinder, index = 2
Name = cone, index = 3
Name = torus, index = 4
Name = sphere, index = 5
Name = boxhole, index = 6
Name = bullet, index = 7
Body 1 number of surface: nodes - 98, elements - 192
Body 2 number of surface: nodes - 298, elements - 592
Body 3 number of surface: nodes - 488, elements - 972
Body 4 number of surface: nodes - 2048, elements - 4096
Body 5 number of surface: nodes - 152, elements - 300
Body 6 number of surface: nodes - 624, elements - 1248
Body 7 number of surface: nodes - 489, elements - 974
Getting volume mesh for body 1 (of 7)
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = box, index = 1
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.00322
Creating surface mesh ...
Surface mesh seconds: 0.000198
Recovering boundaries...
Boundary recovery seconds: 0.00125
Removing exterior tetrahedra ...
Spreading region attributes.
Exterior tets removal seconds: 6e-05
Recovering Delaunayness...
Delaunay recovery seconds: 0.003698
Refining mesh...
Refinement seconds: 0.001995
Smoothing vertices...
Mesh smoothing seconds: 0.004397
Improving mesh...
Mesh improvement seconds: 0.000172
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 4.4e-05
Total running seconds: 0.015101
Statistics:
Input points: 98
Input facets: 192
Input segments: 288
Input holes: 0
Input regions: 0
Mesh points: 100
Mesh tetrahedra: 232
Mesh faces: 560
Mesh faces on exterior boundary: 192
Mesh faces on input facets: 192
Mesh edges on input segments: 288
Steiner points inside domain: 2
Done meshing using TetGen!
Getting volume mesh for body 2 (of 7)
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = cylinder, index = 1
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.017317
Creating surface mesh ...
Surface mesh seconds: 0.000574
Recovering boundaries...
Boundary recovery seconds: 0.002741
Removing exterior tetrahedra ...
Spreading region attributes.
Exterior tets removal seconds: 0.000377
Recovering Delaunayness...
Delaunay recovery seconds: 0.008071
Refining mesh...
Refinement seconds: 0.032565
Smoothing vertices...
Mesh smoothing seconds: 0.042972
Improving mesh...
Mesh improvement seconds: 0.001298
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.000308
Total running seconds: 0.106301
Statistics:
Input points: 298
Input facets: 592
Input segments: 888
Input holes: 0
Input regions: 0
Mesh points: 355
Mesh tetrahedra: 1106
Mesh faces: 2508
Mesh faces on exterior boundary: 592
Mesh faces on input facets: 592
Mesh edges on input segments: 888
Steiner points inside domain: 57
Done meshing using TetGen!
Getting volume mesh for body 3 (of 7)
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = cone, index = 1
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.108957
Creating surface mesh ...
Surface mesh seconds: 0.000923
Recovering boundaries...
Boundary recovery seconds: 0.014633
Removing exterior tetrahedra ...
Spreading region attributes.
Exterior tets removal seconds: 0.000858
Recovering Delaunayness...
Delaunay recovery seconds: 0.023469
Refining mesh...
650 insertions, added 162 points, 7185 tetrahedra in queue.
216 insertions, added 10 points, 5924 tetrahedra in queue.
288 insertions, added 6 points, 2911 tetrahedra in queue.
384 insertions, added 10 points, 126 tetrahedra in queue.
Refinement seconds: 0.297664
Smoothing vertices...
Mesh smoothing seconds: 0.106375
Improving mesh...
Mesh improvement seconds: 0.002175
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.000219
Total running seconds: 0.555346
Statistics:
Input points: 488
Input facets: 972
Input segments: 1458
Input holes: 0
Input regions: 0
Mesh points: 687
Mesh tetrahedra: 2744
Mesh faces: 5974
Mesh faces on exterior boundary: 972
Mesh faces on input facets: 972
Mesh edges on input segments: 1458
Steiner points inside domain: 199
Done meshing using TetGen!
Getting volume mesh for body 4 (of 7)
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = torus, index = 1
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.749834
Creating surface mesh ...
Surface mesh seconds: 0.006698
Recovering boundaries...
Boundary recovery seconds: 0.015747
Removing exterior tetrahedra ...
Spreading region attributes.
Exterior tets removal seconds: 0.003319
Recovering Delaunayness...
Delaunay recovery seconds: 0.224651
Refining mesh...
Refinement seconds: 0.561695
Smoothing vertices...
Mesh smoothing seconds: 0.452572
Improving mesh...
Mesh improvement seconds: 0.009973
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.00222
Total running seconds: 2.027
Statistics:
Input points: 2048
Input facets: 4096
Input segments: 6144
Input holes: 0
Input regions: 0
Mesh points: 2901
Mesh tetrahedra: 11307
Mesh faces: 24662
Mesh faces on exterior boundary: 4096
Mesh faces on input facets: 4096
Mesh edges on input segments: 6144
Steiner points inside domain: 853
Done meshing using TetGen!
Getting volume mesh for body 5 (of 7)
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = sphere, index = 1
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.000716
Creating surface mesh ...
Surface mesh seconds: 0.000313
Recovering boundaries...
Boundary recovery seconds: 0.000517
Removing exterior tetrahedra ...
Spreading region attributes.
Exterior tets removal seconds: 0.000114
Recovering Delaunayness...
Delaunay recovery seconds: 0.000665
Refining mesh...
Refinement seconds: 0.009094
Smoothing vertices...
Mesh smoothing seconds: 0.006754
Improving mesh...
Mesh improvement seconds: 0.000437
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 7e-05
Total running seconds: 0.018719
Statistics:
Input points: 152
Input facets: 300
Input segments: 450
Input holes: 0
Input regions: 0
Mesh points: 193
Mesh tetrahedra: 636
Mesh faces: 1422
Mesh faces on exterior boundary: 300
Mesh faces on input facets: 300
Mesh edges on input segments: 450
Steiner points inside domain: 41
Done meshing using TetGen!
Getting volume mesh for body 6 (of 7)
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = boxhole, index = 1
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.088516
Creating surface mesh ...
Surface mesh seconds: 0.002812
Recovering boundaries...
Boundary recovery seconds: 0.011017
Removing exterior tetrahedra ...
Spreading region attributes.
Exterior tets removal seconds: 0.000968
Recovering Delaunayness...
Delaunay recovery seconds: 0.015009
Refining mesh...
831 insertions, added 215 points, 6026 tetrahedra in queue.
276 insertions, added 15 points, 1148 tetrahedra in queue.
Refinement seconds: 0.13412
Smoothing vertices...
Mesh smoothing seconds: 0.117017
Improving mesh...
Mesh improvement seconds: 0.002452
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.000254
Total running seconds: 0.372245
Statistics:
Input points: 624
Input facets: 1248
Input segments: 1872
Input holes: 0
Input regions: 0
Mesh points: 854
Mesh tetrahedra: 3220
Mesh faces: 7064
Mesh faces on exterior boundary: 1248
Mesh faces on input facets: 1248
Mesh edges on input segments: 1872
Steiner points inside domain: 230
Done meshing using TetGen!
Getting volume mesh for body 7 (of 7)
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = bullet, index = 1
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.079635
Creating surface mesh ...
Surface mesh seconds: 0.000954
Recovering boundaries...
Boundary recovery seconds: 0.010931
Removing exterior tetrahedra ...
Spreading region attributes.
Exterior tets removal seconds: 0.000565
Recovering Delaunayness...
Delaunay recovery seconds: 0.060561
Refining mesh...
Refinement seconds: 0.098671
Smoothing vertices...
Mesh smoothing seconds: 0.054161
Improving mesh...
Mesh improvement seconds: 0.002673
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.000213
Total running seconds: 0.308435
Statistics:
Input points: 489
Input facets: 974
Input segments: 1461
Input holes: 0
Input regions: 0
Mesh points: 670
Mesh tetrahedra: 2479
Mesh faces: 5445
Mesh faces on exterior boundary: 974
Mesh faces on input facets: 974
Mesh edges on input segments: 1461
Steiner points inside domain: 181
Done meshing using TetGen!
Writing AFLR3 file ....
Finished writing AFLR3 file
Writing AFLR3 file ....
Finished writing AFLR3 file
Writing AFLR3 file ....
Finished writing AFLR3 file
Writing AFLR3 file ....
Finished writing AFLR3 file
Writing AFLR3 file ....
Finished writing AFLR3 file
Writing AFLR3 file ....
Finished writing AFLR3 file
Writing AFLR3 file ....
Finished writing AFLR3 file
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 7
Name = box, index = 1
Name = cylinder, index = 2
Name = cone, index = 3
Name = torus, index = 4
Name = sphere, index = 5
Name = boxhole, index = 6
Name = bullet, index = 7
Body 1 number of surface: nodes - 98, elements - 192
Body 2 number of surface: nodes - 298, elements - 592
Body 3 number of surface: nodes - 488, elements - 972
Body 4 number of surface: nodes - 2048, elements - 4096
Body 5 number of surface: nodes - 152, elements - 300
Body 6 number of surface: nodes - 624, elements - 1248
Body 7 number of surface: nodes - 489, elements - 974
Getting volume mesh
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.003216
Creating surface mesh ...
Surface mesh seconds: 0.00019
Recovering boundaries...
Boundary recovery seconds: 0.001239
Removing exterior tetrahedra ...
Spreading region attributes.
Exterior tets removal seconds: 6e-05
Recovering Delaunayness...
Delaunay recovery seconds: 0.001129
Refining mesh...
Refinement seconds: 0.000587
Smoothing vertices...
Mesh smoothing seconds: 0.004099
Improving mesh...
Mesh improvement seconds: 0.000161
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 4.3e-05
Total running seconds: 0.010762
Statistics:
Input points: 98
Input facets: 192
Input segments: 288
Input holes: 0
Input regions: 1
Mesh points: 100
Mesh tetrahedra: 232
Mesh faces: 560
Mesh faces on exterior boundary: 192
Mesh faces on input facets: 192
Mesh edges on input segments: 288
Steiner points inside domain: 2
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.023978
Creating surface mesh ...
Surface mesh seconds: 0.000587
Recovering boundaries...
Boundary recovery seconds: 0.002801
Removing exterior tetrahedra ...
Warning: The 1-th region point lies outside the convex hull.
Spreading region attributes.
Exterior tets removal seconds: 0.000388
Recovering Delaunayness...
Delaunay recovery seconds: 0.011026
Refining mesh...
Refinement seconds: 0.033286
Smoothing vertices...
Mesh smoothing seconds: 0.036357
Improving mesh...
Mesh improvement seconds: 0.001318
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.000289
Total running seconds: 0.110096
Statistics:
Input points: 298
Input facets: 592
Input segments: 888
Input holes: 0
Input regions: 2
Mesh points: 355
Mesh tetrahedra: 1106
Mesh faces: 2508
Mesh faces on exterior boundary: 592
Mesh faces on input facets: 592
Mesh edges on input segments: 888
Steiner points inside domain: 57
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.107021
Creating surface mesh ...
Surface mesh seconds: 0.000942
Recovering boundaries...
Boundary recovery seconds: 0.014657
Removing exterior tetrahedra ...
Warning: The 1-th region point lies outside the convex hull.
Warning: The 2-th region point lies outside the convex hull.
Spreading region attributes.
Exterior tets removal seconds: 0.000885
Recovering Delaunayness...
Delaunay recovery seconds: 0.02279
Refining mesh...
650 insertions, added 162 points, 7185 tetrahedra in queue.
216 insertions, added 10 points, 5924 tetrahedra in queue.
288 insertions, added 6 points, 2911 tetrahedra in queue.
384 insertions, added 10 points, 126 tetrahedra in queue.
Refinement seconds: 0.286262
Smoothing vertices...
Mesh smoothing seconds: 0.111567
Improving mesh...
Mesh improvement seconds: 0.002066
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.000211
Total running seconds: 0.546526
Statistics:
Input points: 488
Input facets: 972
Input segments: 1458
Input holes: 0
Input regions: 3
Mesh points: 687
Mesh tetrahedra: 2744
Mesh faces: 5974
Mesh faces on exterior boundary: 972
Mesh faces on input facets: 972
Mesh edges on input segments: 1458
Steiner points inside domain: 199
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.767802
Creating surface mesh ...
Surface mesh seconds: 0.007488
Recovering boundaries...
Boundary recovery seconds: 0.01906
Removing exterior tetrahedra ...
Warning: The 1-th region point lies outside the convex hull.
Warning: The 2-th region point lies outside the convex hull.
Warning: The 3-th region point lies outside the convex hull.
Spreading region attributes.
Exterior tets removal seconds: 0.003327
Recovering Delaunayness...
Delaunay recovery seconds: 0.220431
Refining mesh...
Refinement seconds: 0.580304
Smoothing vertices...
Mesh smoothing seconds: 0.453813
Improving mesh...
Mesh improvement seconds: 0.015294
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.00088
Total running seconds: 2.06868
Statistics:
Input points: 2048
Input facets: 4096
Input segments: 6144
Input holes: 0
Input regions: 4
Mesh points: 2901
Mesh tetrahedra: 11307
Mesh faces: 24662
Mesh faces on exterior boundary: 4096
Mesh faces on input facets: 4096
Mesh edges on input segments: 6144
Steiner points inside domain: 853
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.000702
Creating surface mesh ...
Surface mesh seconds: 0.000307
Recovering boundaries...
Boundary recovery seconds: 0.000498
Removing exterior tetrahedra ...
Warning: The 1-th region point lies outside the convex hull.
Warning: The 2-th region point lies outside the convex hull.
Warning: The 3-th region point lies outside the convex hull.
Warning: The 4-th region point lies outside the convex hull.
Spreading region attributes.
Exterior tets removal seconds: 0.000118
Recovering Delaunayness...
Delaunay recovery seconds: 0.000642
Refining mesh...
Refinement seconds: 0.011546
Smoothing vertices...
Mesh smoothing seconds: 0.004519
Improving mesh...
Mesh improvement seconds: 0.000414
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 6.5e-05
Total running seconds: 0.018841
Statistics:
Input points: 152
Input facets: 300
Input segments: 450
Input holes: 0
Input regions: 5
Mesh points: 193
Mesh tetrahedra: 636
Mesh faces: 1422
Mesh faces on exterior boundary: 300
Mesh faces on input facets: 300
Mesh edges on input segments: 450
Steiner points inside domain: 41
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.087843
Creating surface mesh ...
Surface mesh seconds: 0.001193
Recovering boundaries...
Boundary recovery seconds: 0.01328
Removing exterior tetrahedra ...
Warning: The 1-th region point lies outside the convex hull.
Warning: The 2-th region point lies outside the convex hull.
Warning: The 3-th region point lies outside the convex hull.
Warning: The 4-th region point lies outside the convex hull.
Warning: The 5-th region point lies outside the convex hull.
Spreading region attributes.
Exterior tets removal seconds: 0.00101
Recovering Delaunayness...
Delaunay recovery seconds: 0.011902
Refining mesh...
831 insertions, added 215 points, 6026 tetrahedra in queue.
276 insertions, added 15 points, 1148 tetrahedra in queue.
Refinement seconds: 0.125564
Smoothing vertices...
Mesh smoothing seconds: 0.113834
Improving mesh...
Mesh improvement seconds: 0.002434
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.000248
Total running seconds: 0.357381
Statistics:
Input points: 624
Input facets: 1248
Input segments: 1872
Input holes: 0
Input regions: 6
Mesh points: 854
Mesh tetrahedra: 3220
Mesh faces: 7064
Mesh faces on exterior boundary: 1248
Mesh faces on input facets: 1248
Mesh edges on input segments: 1872
Steiner points inside domain: 230
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.078824
Creating surface mesh ...
Surface mesh seconds: 0.000953
Recovering boundaries...
Boundary recovery seconds: 0.005941
Removing exterior tetrahedra ...
Warning: The 1-th region point lies outside the convex hull.
Warning: The 2-th region point lies outside the convex hull.
Warning: The 3-th region point lies outside the convex hull.
Warning: The 4-th region point lies outside the convex hull.
Warning: The 5-th region point lies outside the convex hull.
Warning: The 6-th region point lies outside the convex hull.
Spreading region attributes.
Exterior tets removal seconds: 0.000948
Recovering Delaunayness...
Delaunay recovery seconds: 0.060906
Refining mesh...
Refinement seconds: 0.09421
Smoothing vertices...
Mesh smoothing seconds: 0.056429
Improving mesh...
Mesh improvement seconds: 0.004267
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.000474
Total running seconds: 0.30305
Statistics:
Input points: 489
Input facets: 974
Input segments: 1461
Input holes: 0
Input regions: 7
Mesh points: 673
Mesh tetrahedra: 2510
Mesh faces: 5507
Mesh faces on exterior boundary: 974
Mesh faces on input facets: 974
Mesh edges on input segments: 1461
Steiner points inside domain: 184
Done meshing using TetGen!
Writing AFLR3 file ....
Finished writing AFLR3 file
.Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 3
Name = Farfield, index = 1
Name = Wing1, index = 2
Name = trailingEdge, index = 3
Getting mesh sizing parameters
Mesh sizing name - Farfield
Done getting mesh sizing parameters
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Number of surface: nodes - 9583, elements - 19158
Getting volume mesh
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Done meshing using TetGen!
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Number of surface: nodes - 9583, elements - 19158
Getting volume mesh
Generating volume mesh using TetGen.....
Tetgen input string = pYq2.000/0.000QT1.00e-16A
Done meshing using TetGen!
EGADS Info: 0 Objects, 0 Reference in Use (of 0) at Close!
CAPS Info: Hit last success -- going live!
CAPS Info: Hit last success -- going live!
CAPS Info: Hit last success -- going live!
CAPS Info: Hit last success -- going live!
CAPS Info: Hit last success -- going live!
CAPS Info: Hit last success -- going live!
CAPS Info: Hit last success -- going live!
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 3
Name = Farfield, index = 1
Name = Wing1, index = 2
Name = trailingEdge, index = 3
Getting mesh sizing parameters
Mesh sizing name - Farfield
Done getting mesh sizing parameters
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Number of surface: nodes - 9583, elements - 19158
Getting volume mesh
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Done meshing using TetGen!
CAPS Info: Hit last success -- going live!
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 3
Name = Farfield, index = 1
Name = Wing1, index = 2
Name = trailingEdge, index = 3
Getting mesh sizing parameters
Mesh sizing name - Farfield
Done getting mesh sizing parameters
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
CAPS Info: Hit last success -- going live!
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 3
Name = Farfield, index = 1
Name = Wing1, index = 2
Name = trailingEdge, index = 3
Getting mesh sizing parameters
Mesh sizing name - Farfield
Done getting mesh sizing parameters
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
CAPS Info: Hit last success -- going live!
CAPS Info: Hit last success -- going live!
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 3
Name = Farfield, index = 1
Name = Wing1, index = 2
Name = trailingEdge, index = 3
Getting mesh sizing parameters
Mesh sizing name - Farfield
Done getting mesh sizing parameters
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Number of surface: nodes - 9583, elements - 19158
Getting volume mesh
Generating volume mesh using TetGen.....
Tetgen input string = pYq2.000/0.000QT1.00e-16A
Done meshing using TetGen!
CAPS Info: Hit last success -- going live!
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 3
Name = Farfield, index = 1
Name = Wing1, index = 2
Name = trailingEdge, index = 3
Getting mesh sizing parameters
Mesh sizing name - Farfield
Done getting mesh sizing parameters
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
.Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 3
Name = Farfield, index = 1
Name = Wing1, index = 2
Name = trailingEdge, index = 3
Getting mesh sizing parameters
Mesh sizing name - Farfield
Done getting mesh sizing parameters
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Number of surface: nodes - 9583, elements - 19158
Getting volume mesh
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Done meshing using TetGen!
Writing TECPLOT file: test.dat ....
Finished writing TECPLOT file
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 3
Name = Farfield, index = 1
Name = Wing1, index = 2
Name = trailingEdge, index = 3
Getting mesh sizing parameters
Mesh sizing name - Farfield
Done getting mesh sizing parameters
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 3
Name = Farfield, index = 1
Name = Wing1, index = 2
Name = trailingEdge, index = 3
Getting mesh sizing parameters
Mesh sizing name - Farfield
Done getting mesh sizing parameters
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Number of surface: nodes - 7137, elements - 14266
Getting volume mesh
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Done meshing using TetGen!
Writing TECPLOT file: test.dat ....
Finished writing TECPLOT file
.Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 3
Name = Farfield, index = 1
Name = Wing1, index = 2
Name = trailingEdge, index = 3
Getting mesh sizing parameters
Mesh sizing name - Farfield
Done getting mesh sizing parameters
Getting surface mesh for body 1 (of 1)
Body 1 (of 1)
Number of nodes = 9583
Number of elements = 19158
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 19158
Number of quadrilateral elements = 0
----------------------------
Total number of nodes = 9583
Total number of elements = 19158
Writing TECPLOT file: test.dat ....
Finished writing TECPLOT file
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Number of surface: nodes - 9583, elements - 19158
Getting volume mesh
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Done meshing using TetGen!
Writing TECPLOT file: test.dat ....
Finished writing TECPLOT file
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Number of surface: nodes - 9583, elements - 19158
Getting volume mesh
Generating volume mesh using TetGen.....
Tetgen input string = pYq2.000/0.000QT1.00e-16A
Done meshing using TetGen!
Writing TECPLOT file: test.dat ....
Finished writing TECPLOT file
. EGADS Info: 0 Objects, 0 Reference in Use (of 0) at Close!
.........
======================================================================
ERROR: test_phase (test_su2.TestSU2)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/Users/jenkins/workspace/ESP_UndefinedCaps/7.6/CAPS/unit/DARWINM1/CAPS/aim/unitTest/pyCAPS/test_su2.py", line 229, in test_phase
su2.preAnalysis()
File "/Users/jenkins/workspace/ESP_UndefinedCaps/7.6/CAPS/unit/DARWINM1/CAPS/pyCAPS/pyCAPS/problem.py", line 2140, in preAnalysis
self._analysisObj.preAnalysis()
File "/Users/jenkins/workspace/ESP_UndefinedCaps/7.6/CAPS/unit/DARWINM1/CAPS/pyCAPS/pyCAPS/caps.py", line 999, in wrapper_checkClosed
return func(*args, **kwargs)
File "/Users/jenkins/workspace/ESP_UndefinedCaps/7.6/CAPS/unit/DARWINM1/CAPS/pyCAPS/pyCAPS/caps.py", line 2861, in preAnalysis
if stat: _raiseStatus(stat, errors=capsErrs(nErr, errs))
File "/Users/jenkins/workspace/ESP_UndefinedCaps/7.6/CAPS/unit/DARWINM1/CAPS/pyCAPS/pyCAPS/caps.py", line 822, in _raiseStatus
raise CAPSError(status, msg=msg, errors=errors)
pyCAPS.caps.CAPSError: CAPS_EXECERR:
================================================================================
tetgen_Interface.cpp:481 in tetgen_VolumeMesh():
Error: Tetgen failed to generate an empty volume mesh......!!!
See Tecplot file /Users/jenkins/workspace/ESP_UndefinedCaps/7.6/CAPS/unit/DARWINM1/CAPS/aim/unitTest/pyCAPS/su2_problem_Phase/Phase0/tetgen/tetgenDebugSurface.dat for the surface mesh
tetgenAIM.cpp:740 in aimPreAnalysis():
Error: TetGen volume mesh failed!!!!
transferValues for Mesh from Volume_Mesh = -335
================================================================================
----------------------------------------------------------------------
Ran 123 tests in 939.490s
FAILED (errors=1, skipped=10)
make[1]: *** [test] Error 1
make: *** [unitaim] Error 2
++ true
[GNU C Compiler (gcc)] Parsing console log (workspace: '/Users/jenkins/workspace/ESP_UndefinedCaps/7.6/CAPS/unit/DARWINM1')
[GNU C Compiler (gcc)] Successfully parsed console log
[GNU C Compiler (gcc)] -> found 0 issues (skipped 0 duplicates)
[GNU C Compiler (gcc)] Skipping post processing
[GNU C Compiler (gcc)] No filter has been set, publishing all 0 issues
[GNU C Compiler (gcc)] Repository miner is not configured, skipping repository mining
[Clang] Parsing console log (workspace: '/Users/jenkins/workspace/ESP_UndefinedCaps/7.6/CAPS/unit/DARWINM1')
[Clang] -> found 0 issues (skipped 0 duplicates)
[Clang] Parsing console log (workspace: '/Users/jenkins/workspace/ESP_UndefinedCaps/7.6/CAPS/unit/DARWINM1')
[Clang] -> found 0 issues (skipped 0 duplicates)
[Clang] Successfully parsed console log
[Clang] -> found 0 issues (skipped 0 duplicates)
[Clang] Parsing console log (workspace: '/Users/jenkins/workspace/ESP_UndefinedCaps/7.6/CAPS/unit/DARWINM1')
[Clang] Skipping post processing
[Clang] No filter has been set, publishing all 0 issues
[Clang] Repository miner is not configured, skipping repository mining
[Static Analysis] Successfully parsed console log
[Static Analysis] -> found 0 issues (skipped 0 duplicates)
[Static Analysis] Parsing console log (workspace: '/Users/jenkins/workspace/ESP_UndefinedCaps/7.6/CAPS/unit/DARWINM1')
[Static Analysis] Successfully parsed console log
[Static Analysis] -> found 0 issues (skipped 0 duplicates)
[Static Analysis] Skipping post processing
[Static Analysis] No filter has been set, publishing all 0 issues
[Static Analysis] Repository miner is not configured, skipping repository mining
[Static Analysis] Successfully parsed console log
[Static Analysis] -> found 0 issues (skipped 0 duplicates)
[Static Analysis] Successfully parsed console log
[Static Analysis] -> found 0 issues (skipped 0 duplicates)
[Static Analysis] Successfully parsed console log
[Static Analysis] -> found 0 issues (skipped 0 duplicates)
[Static Analysis] Parsing console log (workspace: '/Users/jenkins/workspace/ESP_UndefinedCaps/7.6/CAPS/unit/DARWINM1')
[Static Analysis] Skipping post processing
[Static Analysis] No filter has been set, publishing all 0 issues
[Static Analysis] Repository miner is not configured, skipping repository mining
[Static Analysis] Reference build recorder is not configured
[Static Analysis] Obtaining reference build from same job (7.6,CAPS/unit,DARWINM1,viggen)
[Static Analysis] Using reference build 'ESP_UndefinedCaps/CASREV=7.6,ESPTEST=CAPS/unit,ESP_ARCH=DARWINM1,buildnode=viggen #178' to compute new, fixed, and outstanding issues
[Static Analysis] Issues delta (vs. reference build): outstanding: 0, new: 0, fixed: 0
[Static Analysis] Evaluating quality gates
[Static Analysis] -> PASSED - Total (any severity): 0 - Quality Gate: 1
[Static Analysis] -> All quality gates have been passed
[Static Analysis] Health report is disabled - skipping
[Static Analysis] Created analysis result for 0 issues (found 0 new issues, fixed 0 issues)
[Static Analysis] Attaching ResultAction with ID 'analysis' to build 'ESP_UndefinedCaps/CASREV=7.6,ESPTEST=CAPS/unit,ESP_ARCH=DARWINM1,buildnode=viggen #179'.
[Checks API] No suitable checks publisher found.
Build step 'Console output (build log) parsing' changed build result to FAILURE
[PostBuildScript] - [INFO] Executing post build scripts.
[PostBuildScript] - [INFO] build step #0 should only be executed on MATRIX
[WS-CLEANUP] Deleting project workspace...
[WS-CLEANUP] Skipped based on build state FAILURE
Finished: FAILURE