Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - plateWidth
Number of design variable relations - 0
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
CAPS Info: Sensitivity FD step 1.000000e-05 used for: plateWidth[1,1]
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - plateWidth
Number of design variable relations - 0
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
CAPS Info: Sensitivity FD step 1.000000e-05 used for: plateWidth[1,1]
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - plateWidth
Number of design variable relations - 0
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
CAPS Info: Sensitivity FD step 1.000000e-05 used for: plateWidth[1,1]
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - plateWidth
Number of design variable relations - 0
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
CAPS Info: Sensitivity FD step 1.000000e-05 used for: plateWidth[1,1]
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - plateWidth
Number of design variable relations - 0
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
CAPS Info: Sensitivity FD step 1.000000e-05 used for: plateWidth[1,1]
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - plateWidth
Number of design variable relations - 0
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
CAPS Info: Sensitivity FD step 1.000000e-05 used for: plateWidth[1,1]
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - plateWidth
Number of design variable relations - 0
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
CAPS Info: Sensitivity FD step 1.000000e-05 used for: plateWidth[1,1]
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - plateWidth
Number of design variable relations - 0
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
CAPS Info: Sensitivity FD step 1.000000e-05 used for: plateWidth[1,1]
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - plateWidth
Number of design variable relations - 0
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
CAPS Info: Sensitivity FD step 1.000000e-05 used for: plateWidth[1,1]
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - plateWidth
Number of design variable relations - 0
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
CAPS Info: Sensitivity FD step 1.000000e-05 used for: plateWidth[1,1]
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - plateWidth
Number of design variable relations - 0
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
CAPS Info: Sensitivity FD step 1.000000e-05 used for: plateWidth[1,1]
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - plateWidth
Number of design variable relations - 0
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
CAPS Info: Sensitivity FD step 1.000000e-05 used for: plateWidth[1,1]
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - plateWidth
Number of design variable relations - 0
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
CAPS Info: Sensitivity FD step 1.000000e-05 used for: plateWidth[1,1]
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - plateWidth
Number of design variable relations - 0
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
CAPS Info: Sensitivity FD step 1.000000e-05 used for: plateWidth[1,1]
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - plateWidth
Number of design variable relations - 0
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
CAPS Info: Sensitivity FD step 1.000000e-05 used for: plateWidth[1,1]
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - plateWidth
Number of design variable relations - 0
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
CAPS Info: Sensitivity FD step 1.000000e-05 used for: plateWidth[1,1]
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
.ERROR:: BAD STATUS = -276 from matsol (called from solveSketchOrig:58043)
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 7
Name = box, index = 1
Name = cylinder, index = 2
Name = cone, index = 3
Name = torus, index = 4
Name = sphere, index = 5
Name = boxhole, index = 6
Name = bullet, index = 7
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 1
Name = box, index = 1
Getting surface mesh for body 1 (of 7)
Getting surface mesh for body 2 (of 7)
Getting surface mesh for body 3 (of 7)
Getting surface mesh for body 4 (of 7)
Getting surface mesh for body 5 (of 7)
Getting surface mesh for body 6 (of 7)
1DC0F9E00 EGADS Info: Face #3 -> Edge #9 (9) Internally in Loop 4 7, sen = -1!
1DC0F9E00 EGADS Info: Face #3 -> Edge #9 (9) Internally in Loop 7 4, sen = 1!
1DC0F9E00 EGADS Info: Face #5 -> Edge #17 (9) Internally in Loop 7 4, sen = -1!
1DC0F9E00 EGADS Info: Face #5 -> Edge #17 (9) Internally in Loop 4 7, sen = 1!
Getting surface mesh for body 7 (of 7)
Body 1 (of 7)
Number of nodes = 98
Number of elements = 192
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 192
Number of quadrilateral elements = 0
Body 2 (of 7)
Number of nodes = 298
Number of elements = 592
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 592
Number of quadrilateral elements = 0
Body 3 (of 7)
Number of nodes = 488
Number of elements = 972
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 972
Number of quadrilateral elements = 0
Warning: No capsGroup/capsIgnore attribute found on edge 1 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 2 of face 1, unable to assign a boundary index value
Body 4 (of 7)
Number of nodes = 2048
Number of elements = 4096
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 4096
Number of quadrilateral elements = 0
Body 5 (of 7)
Number of nodes = 152
Number of elements = 300
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 300
Number of quadrilateral elements = 0
Body 6 (of 7)
Number of nodes = 624
Number of elements = 1248
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 1248
Number of quadrilateral elements = 0
Body 7 (of 7)
Number of nodes = 489
Number of elements = 974
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 974
Number of quadrilateral elements = 0
----------------------------
Total number of nodes = 4197
Total number of elements = 8374
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 7
Name = box, index = 1
Name = cylinder, index = 2
Name = cone, index = 3
Name = torus, index = 4
Name = sphere, index = 5
Name = boxhole, index = 6
Name = bullet, index = 7
Body 1 number of surface: nodes - 98, elements - 192
Body 2 number of surface: nodes - 298, elements - 592
Body 3 number of surface: nodes - 488, elements - 972
Body 4 number of surface: nodes - 2048, elements - 4096
Body 5 number of surface: nodes - 152, elements - 300
Body 6 number of surface: nodes - 624, elements - 1248
Body 7 number of surface: nodes - 489, elements - 974
Getting volume mesh for body 1 (of 7)
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = box, index = 1
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.003384
Creating surface mesh ...
Surface mesh seconds: 0.000194
Recovering boundaries...
Boundary recovery seconds: 0.001249
Removing exterior tetrahedra ...
Spreading region attributes.
Exterior tets removal seconds: 5.5e-05
Recovering Delaunayness...
Delaunay recovery seconds: 0.001132
Refining mesh...
Refinement seconds: 0.001222
Smoothing vertices...
Mesh smoothing seconds: 0.004205
Improving mesh...
Mesh improvement seconds: 0.000665
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 4.3e-05
Total running seconds: 0.012181
Statistics:
Input points: 98
Input facets: 192
Input segments: 288
Input holes: 0
Input regions: 0
Mesh points: 100
Mesh tetrahedra: 232
Mesh faces: 560
Mesh faces on exterior boundary: 192
Mesh faces on input facets: 192
Mesh edges on input segments: 288
Steiner points inside domain: 2
Done meshing using TetGen!
Getting volume mesh for body 2 (of 7)
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = cylinder, index = 1
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.017377
Creating surface mesh ...
Surface mesh seconds: 0.00057
Recovering boundaries...
Boundary recovery seconds: 0.002724
Removing exterior tetrahedra ...
Spreading region attributes.
Exterior tets removal seconds: 0.000377
Recovering Delaunayness...
Delaunay recovery seconds: 0.004917
Refining mesh...
Refinement seconds: 0.025992
Smoothing vertices...
Mesh smoothing seconds: 0.030411
Improving mesh...
Mesh improvement seconds: 0.001393
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.000118
Total running seconds: 0.083922
Statistics:
Input points: 298
Input facets: 592
Input segments: 888
Input holes: 0
Input regions: 0
Mesh points: 355
Mesh tetrahedra: 1106
Mesh faces: 2508
Mesh faces on exterior boundary: 592
Mesh faces on input facets: 592
Mesh edges on input segments: 888
Steiner points inside domain: 57
Done meshing using TetGen!
Getting volume mesh for body 3 (of 7)
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = cone, index = 1
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.078777
Creating surface mesh ...
Surface mesh seconds: 0.000942
Recovering boundaries...
Boundary recovery seconds: 0.007817
Removing exterior tetrahedra ...
Spreading region attributes.
Exterior tets removal seconds: 0.000828
Recovering Delaunayness...
Delaunay recovery seconds: 0.023368
Refining mesh...
650 insertions, added 162 points, 7185 tetrahedra in queue.
216 insertions, added 10 points, 5924 tetrahedra in queue.
288 insertions, added 6 points, 2911 tetrahedra in queue.
384 insertions, added 10 points, 126 tetrahedra in queue.
Refinement seconds: 0.21399
Smoothing vertices...
Mesh smoothing seconds: 0.089974
Improving mesh...
Mesh improvement seconds: 0.002046
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.000206
Total running seconds: 0.418009
Statistics:
Input points: 488
Input facets: 972
Input segments: 1458
Input holes: 0
Input regions: 0
Mesh points: 687
Mesh tetrahedra: 2744
Mesh faces: 5974
Mesh faces on exterior boundary: 972
Mesh faces on input facets: 972
Mesh edges on input segments: 1458
Steiner points inside domain: 199
Done meshing using TetGen!
Getting volume mesh for body 4 (of 7)
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = torus, index = 1
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.573236
Creating surface mesh ...
Surface mesh seconds: 0.004495
Recovering boundaries...
Boundary recovery seconds: 0.010905
Removing exterior tetrahedra ...
Spreading region attributes.
Exterior tets removal seconds: 0.00296
Recovering Delaunayness...
Delaunay recovery seconds: 0.170603
Refining mesh...
Refinement seconds: 0.43744
Smoothing vertices...
Mesh smoothing seconds: 0.347607
Improving mesh...
Mesh improvement seconds: 0.009944
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.000831
Total running seconds: 1.55814
Statistics:
Input points: 2048
Input facets: 4096
Input segments: 6144
Input holes: 0
Input regions: 0
Mesh points: 2901
Mesh tetrahedra: 11307
Mesh faces: 24662
Mesh faces on exterior boundary: 4096
Mesh faces on input facets: 4096
Mesh edges on input segments: 6144
Steiner points inside domain: 853
Done meshing using TetGen!
Getting volume mesh for body 5 (of 7)
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = sphere, index = 1
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.000699
Creating surface mesh ...
Surface mesh seconds: 0.000301
Recovering boundaries...
Boundary recovery seconds: 0.000491
Removing exterior tetrahedra ...
Spreading region attributes.
Exterior tets removal seconds: 0.000106
Recovering Delaunayness...
Delaunay recovery seconds: 0.000639
Refining mesh...
Refinement seconds: 0.005369
Smoothing vertices...
Mesh smoothing seconds: 0.004696
Improving mesh...
Mesh improvement seconds: 0.000514
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.000146
Total running seconds: 0.012995
Statistics:
Input points: 152
Input facets: 300
Input segments: 450
Input holes: 0
Input regions: 0
Mesh points: 193
Mesh tetrahedra: 636
Mesh faces: 1422
Mesh faces on exterior boundary: 300
Mesh faces on input facets: 300
Mesh edges on input segments: 450
Steiner points inside domain: 41
Done meshing using TetGen!
Getting volume mesh for body 6 (of 7)
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = boxhole, index = 1
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.064564
Creating surface mesh ...
Surface mesh seconds: 0.001336
Recovering boundaries...
Boundary recovery seconds: 0.006551
Removing exterior tetrahedra ...
Spreading region attributes.
Exterior tets removal seconds: 0.000957
Recovering Delaunayness...
Delaunay recovery seconds: 0.008392
Refining mesh...
831 insertions, added 215 points, 6026 tetrahedra in queue.
276 insertions, added 15 points, 1148 tetrahedra in queue.
Refinement seconds: 0.091421
Smoothing vertices...
Mesh smoothing seconds: 0.077473
Improving mesh...
Mesh improvement seconds: 0.002651
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.000252
Total running seconds: 0.253658
Statistics:
Input points: 624
Input facets: 1248
Input segments: 1872
Input holes: 0
Input regions: 0
Mesh points: 854
Mesh tetrahedra: 3220
Mesh faces: 7064
Mesh faces on exterior boundary: 1248
Mesh faces on input facets: 1248
Mesh edges on input segments: 1872
Steiner points inside domain: 230
Done meshing using TetGen!
Getting volume mesh for body 7 (of 7)
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = bullet, index = 1
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.057317
Creating surface mesh ...
Surface mesh seconds: 0.000948
Recovering boundaries...
Boundary recovery seconds: 0.006259
Removing exterior tetrahedra ...
Spreading region attributes.
Exterior tets removal seconds: 0.000561
Recovering Delaunayness...
Delaunay recovery seconds: 0.042353
Refining mesh...
Refinement seconds: 0.062258
Smoothing vertices...
Mesh smoothing seconds: 0.041001
Improving mesh...
Mesh improvement seconds: 0.001887
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.000204
Total running seconds: 0.212843
Statistics:
Input points: 489
Input facets: 974
Input segments: 1461
Input holes: 0
Input regions: 0
Mesh points: 670
Mesh tetrahedra: 2479
Mesh faces: 5445
Mesh faces on exterior boundary: 974
Mesh faces on input facets: 974
Mesh edges on input segments: 1461
Steiner points inside domain: 181
Done meshing using TetGen!
Writing AFLR3 file ....
Finished writing AFLR3 file
Writing AFLR3 file ....
Finished writing AFLR3 file
Writing AFLR3 file ....
Finished writing AFLR3 file
Writing AFLR3 file ....
Finished writing AFLR3 file
Writing AFLR3 file ....
Finished writing AFLR3 file
Writing AFLR3 file ....
Finished writing AFLR3 file
Writing AFLR3 file ....
Finished writing AFLR3 file
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 7
Name = box, index = 1
Name = cylinder, index = 2
Name = cone, index = 3
Name = torus, index = 4
Name = sphere, index = 5
Name = boxhole, index = 6
Name = bullet, index = 7
Body 1 number of surface: nodes - 98, elements - 192
Body 2 number of surface: nodes - 298, elements - 592
Body 3 number of surface: nodes - 488, elements - 972
Body 4 number of surface: nodes - 2048, elements - 4096
Body 5 number of surface: nodes - 152, elements - 300
Body 6 number of surface: nodes - 624, elements - 1248
Body 7 number of surface: nodes - 489, elements - 974
Getting volume mesh
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.003213
Creating surface mesh ...
Surface mesh seconds: 0.00023
Recovering boundaries...
Boundary recovery seconds: 0.00125
Removing exterior tetrahedra ...
Spreading region attributes.
Exterior tets removal seconds: 6e-05
Recovering Delaunayness...
Delaunay recovery seconds: 0.001131
Refining mesh...
Refinement seconds: 0.000614
Smoothing vertices...
Mesh smoothing seconds: 0.00449
Improving mesh...
Mesh improvement seconds: 0.000725
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 4.6e-05
Total running seconds: 0.011796
Statistics:
Input points: 98
Input facets: 192
Input segments: 288
Input holes: 0
Input regions: 1
Mesh points: 100
Mesh tetrahedra: 232
Mesh faces: 560
Mesh faces on exterior boundary: 192
Mesh faces on input facets: 192
Mesh edges on input segments: 288
Steiner points inside domain: 2
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.021804
Creating surface mesh ...
Surface mesh seconds: 0.000589
Recovering boundaries...
Boundary recovery seconds: 0.006447
Removing exterior tetrahedra ...
Warning: The 1-th region point lies outside the convex hull.
Spreading region attributes.
Exterior tets removal seconds: 0.000478
Recovering Delaunayness...
Delaunay recovery seconds: 0.004913
Refining mesh...
Refinement seconds: 0.027868
Smoothing vertices...
Mesh smoothing seconds: 0.032106
Improving mesh...
Mesh improvement seconds: 0.000822
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.000153
Total running seconds: 0.095258
Statistics:
Input points: 298
Input facets: 592
Input segments: 888
Input holes: 0
Input regions: 2
Mesh points: 355
Mesh tetrahedra: 1106
Mesh faces: 2508
Mesh faces on exterior boundary: 592
Mesh faces on input facets: 592
Mesh edges on input segments: 888
Steiner points inside domain: 57
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.075041
Creating surface mesh ...
Surface mesh seconds: 0.001096
Recovering boundaries...
Boundary recovery seconds: 0.008178
Removing exterior tetrahedra ...
Warning: The 1-th region point lies outside the convex hull.
Warning: The 2-th region point lies outside the convex hull.
Spreading region attributes.
Exterior tets removal seconds: 0.000892
Recovering Delaunayness...
Delaunay recovery seconds: 0.016943
Refining mesh...
650 insertions, added 162 points, 7185 tetrahedra in queue.
216 insertions, added 10 points, 5924 tetrahedra in queue.
288 insertions, added 6 points, 2911 tetrahedra in queue.
384 insertions, added 10 points, 126 tetrahedra in queue.
Refinement seconds: 0.206003
Smoothing vertices...
Mesh smoothing seconds: 0.077307
Improving mesh...
Mesh improvement seconds: 0.002838
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.000259
Total running seconds: 0.388616
Statistics:
Input points: 488
Input facets: 972
Input segments: 1458
Input holes: 0
Input regions: 3
Mesh points: 687
Mesh tetrahedra: 2744
Mesh faces: 5974
Mesh faces on exterior boundary: 972
Mesh faces on input facets: 972
Mesh edges on input segments: 1458
Steiner points inside domain: 199
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.563355
Creating surface mesh ...
Surface mesh seconds: 0.004004
Recovering boundaries...
Boundary recovery seconds: 0.011847
Removing exterior tetrahedra ...
Warning: The 1-th region point lies outside the convex hull.
Warning: The 2-th region point lies outside the convex hull.
Warning: The 3-th region point lies outside the convex hull.
Spreading region attributes.
Exterior tets removal seconds: 0.003323
Recovering Delaunayness...
Delaunay recovery seconds: 0.172198
Refining mesh...
Refinement seconds: 0.443895
Smoothing vertices...
Mesh smoothing seconds: 0.335046
Improving mesh...
Mesh improvement seconds: 0.013636
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.001671
Total running seconds: 1.54911
Statistics:
Input points: 2048
Input facets: 4096
Input segments: 6144
Input holes: 0
Input regions: 4
Mesh points: 2901
Mesh tetrahedra: 11307
Mesh faces: 24662
Mesh faces on exterior boundary: 4096
Mesh faces on input facets: 4096
Mesh edges on input segments: 6144
Steiner points inside domain: 853
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.000698
Creating surface mesh ...
Surface mesh seconds: 0.000303
Recovering boundaries...
Boundary recovery seconds: 0.000499
Removing exterior tetrahedra ...
Warning: The 1-th region point lies outside the convex hull.
Warning: The 2-th region point lies outside the convex hull.
Warning: The 3-th region point lies outside the convex hull.
Warning: The 4-th region point lies outside the convex hull.
Spreading region attributes.
Exterior tets removal seconds: 0.000121
Recovering Delaunayness...
Delaunay recovery seconds: 0.000638
Refining mesh...
Refinement seconds: 0.004683
Smoothing vertices...
Mesh smoothing seconds: 0.004485
Improving mesh...
Mesh improvement seconds: 0.000411
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.000152
Total running seconds: 0.012023
Statistics:
Input points: 152
Input facets: 300
Input segments: 450
Input holes: 0
Input regions: 5
Mesh points: 193
Mesh tetrahedra: 636
Mesh faces: 1422
Mesh faces on exterior boundary: 300
Mesh faces on input facets: 300
Mesh edges on input segments: 450
Steiner points inside domain: 41
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.068038
Creating surface mesh ...
Surface mesh seconds: 0.001189
Recovering boundaries...
Boundary recovery seconds: 0.006265
Removing exterior tetrahedra ...
Warning: The 1-th region point lies outside the convex hull.
Warning: The 2-th region point lies outside the convex hull.
Warning: The 3-th region point lies outside the convex hull.
Warning: The 4-th region point lies outside the convex hull.
Warning: The 5-th region point lies outside the convex hull.
Spreading region attributes.
Exterior tets removal seconds: 0.000973
Recovering Delaunayness...
Delaunay recovery seconds: 0.008235
Refining mesh...
831 insertions, added 215 points, 6026 tetrahedra in queue.
276 insertions, added 15 points, 1148 tetrahedra in queue.
Refinement seconds: 0.099343
Smoothing vertices...
Mesh smoothing seconds: 0.079375
Improving mesh...
Mesh improvement seconds: 0.002426
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.000251
Total running seconds: 0.266158
Statistics:
Input points: 624
Input facets: 1248
Input segments: 1872
Input holes: 0
Input regions: 6
Mesh points: 854
Mesh tetrahedra: 3220
Mesh faces: 7064
Mesh faces on exterior boundary: 1248
Mesh faces on input facets: 1248
Mesh edges on input segments: 1872
Steiner points inside domain: 230
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.059422
Creating surface mesh ...
Surface mesh seconds: 0.000954
Recovering boundaries...
Boundary recovery seconds: 0.006285
Removing exterior tetrahedra ...
Warning: The 1-th region point lies outside the convex hull.
Warning: The 2-th region point lies outside the convex hull.
Warning: The 3-th region point lies outside the convex hull.
Warning: The 4-th region point lies outside the convex hull.
Warning: The 5-th region point lies outside the convex hull.
Warning: The 6-th region point lies outside the convex hull.
Spreading region attributes.
Exterior tets removal seconds: 0.000597
Recovering Delaunayness...
Delaunay recovery seconds: 0.046982
Refining mesh...
Refinement seconds: 0.065652
Smoothing vertices...
Mesh smoothing seconds: 0.04361
Improving mesh...
Mesh improvement seconds: 0.004092
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.000431
Total running seconds: 0.228092
Statistics:
Input points: 489
Input facets: 974
Input segments: 1461
Input holes: 0
Input regions: 7
Mesh points: 673
Mesh tetrahedra: 2510
Mesh faces: 5507
Mesh faces on exterior boundary: 974
Mesh faces on input facets: 974
Mesh edges on input segments: 1461
Steiner points inside domain: 184
Done meshing using TetGen!
Writing AFLR3 file ....
Finished writing AFLR3 file
.Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 3
Name = Farfield, index = 1
Name = Wing1, index = 2
Name = trailingEdge, index = 3
Getting mesh sizing parameters
Mesh sizing name - Farfield
Done getting mesh sizing parameters
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Number of surface: nodes - 9583, elements - 19158
Getting volume mesh
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Done meshing using TetGen!
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Number of surface: nodes - 9583, elements - 19158
Getting volume mesh
Generating volume mesh using TetGen.....
Tetgen input string = pYq2.000/0.000QT1.00e-16A
Done meshing using TetGen!
EGADS Info: 0 Objects, 0 Reference in Use (of 0) at Close!
CAPS Info: Hit last success -- going live!
CAPS Info: Hit last success -- going live!
CAPS Info: Hit last success -- going live!
CAPS Info: Hit last success -- going live!
CAPS Info: Hit last success -- going live!
CAPS Info: Hit last success -- going live!
CAPS Info: Hit last success -- going live!
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 3
Name = Farfield, index = 1
Name = Wing1, index = 2
Name = trailingEdge, index = 3
Getting mesh sizing parameters
Mesh sizing name - Farfield
Done getting mesh sizing parameters
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Number of surface: nodes - 9583, elements - 19158
Getting volume mesh
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Done meshing using TetGen!
CAPS Info: Hit last success -- going live!
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 3
Name = Farfield, index = 1
Name = Wing1, index = 2
Name = trailingEdge, index = 3
Getting mesh sizing parameters
Mesh sizing name - Farfield
Done getting mesh sizing parameters
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
CAPS Info: Hit last success -- going live!
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 3
Name = Farfield, index = 1
Name = Wing1, index = 2
Name = trailingEdge, index = 3
Getting mesh sizing parameters
Mesh sizing name - Farfield
Done getting mesh sizing parameters
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
CAPS Info: Hit last success -- going live!
CAPS Info: Hit last success -- going live!
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 3
Name = Farfield, index = 1
Name = Wing1, index = 2
Name = trailingEdge, index = 3
Getting mesh sizing parameters
Mesh sizing name - Farfield
Done getting mesh sizing parameters
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Number of surface: nodes - 9583, elements - 19158
Getting volume mesh
Generating volume mesh using TetGen.....
Tetgen input string = pYq2.000/0.000QT1.00e-16A
Done meshing using TetGen!
CAPS Info: Hit last success -- going live!
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 3
Name = Farfield, index = 1
Name = Wing1, index = 2
Name = trailingEdge, index = 3
Getting mesh sizing parameters
Mesh sizing name - Farfield
Done getting mesh sizing parameters
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
.Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 3
Name = Farfield, index = 1
Name = Wing1, index = 2
Name = trailingEdge, index = 3
Getting mesh sizing parameters
Mesh sizing name - Farfield
Done getting mesh sizing parameters
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Number of surface: nodes - 9583, elements - 19158
Getting volume mesh
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Done meshing using TetGen!
Writing TECPLOT file: test.dat ....
Finished writing TECPLOT file
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 3
Name = Farfield, index = 1
Name = Wing1, index = 2
Name = trailingEdge, index = 3
Getting mesh sizing parameters
Mesh sizing name - Farfield
Done getting mesh sizing parameters
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 3
Name = Farfield, index = 1
Name = Wing1, index = 2
Name = trailingEdge, index = 3
Getting mesh sizing parameters
Mesh sizing name - Farfield
Done getting mesh sizing parameters
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Number of surface: nodes - 7137, elements - 14266
Getting volume mesh
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Done meshing using TetGen!
Writing TECPLOT file: test.dat ....
Finished writing TECPLOT file
.Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 3
Name = Farfield, index = 1
Name = Wing1, index = 2
Name = trailingEdge, index = 3
Getting mesh sizing parameters
Mesh sizing name - Farfield
Done getting mesh sizing parameters
Getting surface mesh for body 1 (of 1)
Body 1 (of 1)
Number of nodes = 9583
Number of elements = 19158
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 19158
Number of quadrilateral elements = 0
----------------------------
Total number of nodes = 9583
Total number of elements = 19158
Writing TECPLOT file: test.dat ....
Finished writing TECPLOT file
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Number of surface: nodes - 9583, elements - 19158
Getting volume mesh
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Done meshing using TetGen!
Writing TECPLOT file: test.dat ....
Finished writing TECPLOT file
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Number of surface: nodes - 9583, elements - 19158
Getting volume mesh
Generating volume mesh using TetGen.....
Tetgen input string = pYq2.000/0.000QT1.00e-16A
Done meshing using TetGen!
Writing TECPLOT file: test.dat ....
Finished writing TECPLOT file
. EGADS Info: 0 Objects, 0 Reference in Use (of 0) at Close!
.........
======================================================================
ERROR: test_phase (test_su2.TestSU2)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/Users/jenkins/workspace/ESP_UndefinedCaps/7.7/CAPS/unit/DARWIN_ARM64/CAPS/aim/unitTest/pyCAPS/test_su2.py", line 229, in test_phase
su2.preAnalysis()
File "/Users/jenkins/workspace/ESP_UndefinedCaps/7.7/CAPS/unit/DARWIN_ARM64/CAPS/pyCAPS/pyCAPS/problem.py", line 2140, in preAnalysis
self._analysisObj.preAnalysis()
File "/Users/jenkins/workspace/ESP_UndefinedCaps/7.7/CAPS/unit/DARWIN_ARM64/CAPS/pyCAPS/pyCAPS/caps.py", line 999, in wrapper_checkClosed
return func(*args, **kwargs)
File "/Users/jenkins/workspace/ESP_UndefinedCaps/7.7/CAPS/unit/DARWIN_ARM64/CAPS/pyCAPS/pyCAPS/caps.py", line 2861, in preAnalysis
if stat: _raiseStatus(stat, errors=capsErrs(nErr, errs))
File "/Users/jenkins/workspace/ESP_UndefinedCaps/7.7/CAPS/unit/DARWIN_ARM64/CAPS/pyCAPS/pyCAPS/caps.py", line 822, in _raiseStatus
raise CAPSError(status, msg=msg, errors=errors)
pyCAPS.caps.CAPSError: CAPS_EXECERR:
================================================================================
tetgen_Interface.cpp:481 in tetgen_VolumeMesh():
Error: Tetgen failed to generate an empty volume mesh......!!!
See Tecplot file /Users/jenkins/workspace/ESP_UndefinedCaps/7.7/CAPS/unit/DARWIN_ARM64/CAPS/aim/unitTest/pyCAPS/su2_problem_Phase/Phase0/tetgen/tetgenDebugSurface.dat for the surface mesh
tetgenAIM.cpp:740 in aimPreAnalysis():
Error: TetGen volume mesh failed!!!!
transferValues for Mesh from Volume_Mesh = -335
================================================================================
----------------------------------------------------------------------
Ran 123 tests in 620.220s
FAILED (errors=1, skipped=10)
make[1]: *** [test] Error 1
make: *** [unitaim] Error 2
++ true
[GNU C Compiler (gcc)] Parsing console log (workspace: '/Users/jenkins/workspace/ESP_UndefinedCaps/7.7/CAPS/unit/DARWIN_ARM64')
[GNU C Compiler (gcc)] Successfully parsed console log
[GNU C Compiler (gcc)] -> found 0 issues (skipped 0 duplicates)
[GNU C Compiler (gcc)] Skipping post processing
[GNU C Compiler (gcc)] No filter has been set, publishing all 0 issues
[GNU C Compiler (gcc)] Repository miner is not configured, skipping repository mining
[Clang] Parsing console log (workspace: '/Users/jenkins/workspace/ESP_UndefinedCaps/7.7/CAPS/unit/DARWIN_ARM64')
[Clang] -> found 0 issues (skipped 0 duplicates)
[Clang] Parsing console log (workspace: '/Users/jenkins/workspace/ESP_UndefinedCaps/7.7/CAPS/unit/DARWIN_ARM64')
[Clang] -> found 0 issues (skipped 0 duplicates)
[Clang] Successfully parsed console log
[Clang] -> found 0 issues (skipped 0 duplicates)
[Clang] Parsing console log (workspace: '/Users/jenkins/workspace/ESP_UndefinedCaps/7.7/CAPS/unit/DARWIN_ARM64')
[Clang] Skipping post processing
[Clang] No filter has been set, publishing all 0 issues
[Clang] Repository miner is not configured, skipping repository mining
[Static Analysis] Successfully parsed console log
[Static Analysis] -> found 0 issues (skipped 0 duplicates)
[Static Analysis] Parsing console log (workspace: '/Users/jenkins/workspace/ESP_UndefinedCaps/7.7/CAPS/unit/DARWIN_ARM64')
[Static Analysis] Successfully parsed console log
[Static Analysis] -> found 0 issues (skipped 0 duplicates)
[Static Analysis] Skipping post processing
[Static Analysis] No filter has been set, publishing all 0 issues
[Static Analysis] Repository miner is not configured, skipping repository mining
[Static Analysis] Successfully parsed console log
[Static Analysis] -> found 0 issues (skipped 0 duplicates)
[Static Analysis] Successfully parsed console log
[Static Analysis] -> found 0 issues (skipped 0 duplicates)
[Static Analysis] Successfully parsed console log
[Static Analysis] -> found 0 issues (skipped 0 duplicates)
[Static Analysis] Parsing console log (workspace: '/Users/jenkins/workspace/ESP_UndefinedCaps/7.7/CAPS/unit/DARWIN_ARM64')
[Static Analysis] Skipping post processing
[Static Analysis] No filter has been set, publishing all 0 issues
[Static Analysis] Repository miner is not configured, skipping repository mining
[Static Analysis] Reference build recorder is not configured
[Static Analysis] Obtaining reference build from same job (7.7,CAPS/unit,DARWIN_ARM64,viggen)
[Static Analysis] No valid reference build found that meets the criteria (NO_JOB_FAILURE - SUCCESSFUL_QUALITY_GATE)
[Static Analysis] All reported issues will be considered outstanding
[Static Analysis] Evaluating quality gates
[Static Analysis] -> PASSED - Total (any severity): 0 - Quality Gate: 1
[Static Analysis] -> All quality gates have been passed
[Static Analysis] Health report is disabled - skipping
[Static Analysis] Created analysis result for 0 issues (found 0 new issues, fixed 0 issues)
[Static Analysis] Attaching ResultAction with ID 'analysis' to build 'ESP_UndefinedCaps/CASREV=7.7,ESPTEST=CAPS/unit,ESP_ARCH=DARWIN_ARM64,buildnode=viggen #181'.
[Checks API] No suitable checks publisher found.
Build step 'Console output (build log) parsing' changed build result to FAILURE
[PostBuildScript] - [INFO] Executing post build scripts.
[PostBuildScript] - [INFO] build step #0 should only be executed on MATRIX
[WS-CLEANUP] Deleting project workspace...
[WS-CLEANUP] Skipped based on build state FAILURE
Finished: FAILURE