Skipping 559 KB..
Full Log
AFLR3 GG : ISOTROPIC VOLUME GRID GENERATION
AFLR3 GG : Nodes, Elements = 298 822
AFLR3 GG : Nodes, Elements = 349 975
AFLR3 GG : Nodes, Elements = 349 1115
AFLR3 GG : Nodes, Elements = 349 1047
AFLR3 GG : Nodes, Elements = 383 1149
AFLR3 GG : Nodes, Elements = 383 1311
AFLR3 GG : Nodes, Elements = 383 1254
AFLR3 GG : Nodes, Elements = 399 1302
AFLR3 GG : Nodes, Elements = 399 1374
AFLR3 GG : Nodes, Elements = 399 1350
AFLR3 GG : Nodes, Elements = 403 1362
AFLR3 GG : Nodes, Elements = 403 1377
AFLR3 GG : Nodes, Elements = 403 1376
AFLR3 : CPU Time = 0.123 seconds
AFLR3 QI : QUALITY IMPROVEMENT
AFLR3 QI : Nodes, Elements = 403 1376
AFLR3 QI : Nodes, Elements = 402 1370
AFLR3 QI : Nodes, Elements = 402 1376
AFLR3 QI : Nodes, Elements = 402 1371
AFLR3 QI : Nodes, Elements = 402 1365
AFLR3 QI : Nodes, Elements = 402 1368
AFLR3 QI : Nodes, Elements = 402 1364
AFLR3 QI : Nodes, Elements = 402 1363
AFLR3 : CPU Time = 0.060 seconds
AFLR3 : DONE
UG3 : DIHEDRAL ANGLE CHECK
UG3 : No. Tet Elems = 1363
UG3 : Min, Max Ang = 21.47 133.3
UG3 : Average Angle = 70.1
UG3 : No. Angle>160.0 = 0
UG3 : No. Angle>179.9 = 0
UG3 : VOL CHECK
UG3 : Total-Volume = 0.0184
UG3 : No. Tet Elems = 1363
UG3 : Min Vol = 1.71e-06
UG3 : Average Vol = 1.35e-05
UG3 : Total-Tet-Vol = 0.0184
UG3 : No. Vol<TOL = 0
UG3 : Q VOL-LENGTH-RATIO CHECK
2/3 2
UG3 : Q = c * Vol / sum( L )
UG3 : 0 <= Q <= 1
UG3 : No. Tet Elems = 1363
UG3 : Min, Max Q = 0.599 0.999
UG3 : Average Q = 0.859
UG3 : No. Q< 0.1 = 0
UG3 : No. Q< 0.01 = 0
UG3 : DIHEDRAL ANGLE CHECK
UG3 : No. Tet Elems = 1363
UG3 : Min, Max Ang = 21.47 133.3
UG3 : Average Angle = 70.1
UG3 : No. Angle>160.0 = 0
UG3 : No. Angle>179.9 = 0
UG3 : VOL CHECK
UG3 : Total-Volume = 0.0184
UG3 : No. Tet Elems = 1363
UG3 : Min Vol = 1.71e-06
UG3 : Average Vol = 1.35e-05
UG3 : Total-Tet-Vol = 0.0184
UG3 : No. Vol<TOL = 0
UG3 : Q VOL-LENGTH-RATIO CHECK
2/3 2
UG3 : Q = c * Vol / sum( L )
UG3 : 0 <= Q <= 1
UG3 : Note that L includes scaling for BL-aspect=ratio
UG3 : No. Tet Elems = 1363
UG3 : Min, Max Q = 0.649 1
UG3 : Average Q = 0.878
UG3 : No. Q< 0.1 = 0
UG3 : No. Q< 0.01 = 0
UG3 : CPU Time = 0.000 seconds
EGADS : ---------------------------------------
EGADS : Engineering Geometry Aircraft Design System
EGADS : Version 1.23
EGADS : OpenCASCADE Version 7.4.1
EGADS : ---------------------------------------
OVERALL : CPU Time = 0.414 seconds
EGADS : CREATE EGADS TESS FROM AFLR3 DATA
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 1
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 2
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 3
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 4
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 5
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 6
EGADS : CREATING TESSELLATION FOR BODY 0 FACE 1
EGADS : CREATING TESSELLATION FOR BODY 0 FACE 2
EGADS : CREATING TESSELLATION FOR BODY 0 FACE 3
EGADS : CREATING TESSELLATION FOR BODY 0 FACE 4
EGADS : EGADS TESS CREATED
EGADS : CHECK TESS GLOBAL FACE NODE MAP
EGADS : CHECKING NODE MAP FOR BODY 0 FACE 1
EGADS : CHECKING NODE MAP FOR BODY 0 FACE 2
EGADS : CHECKING NODE MAP FOR BODY 0 FACE 3
EGADS : CHECKING NODE MAP FOR BODY 0 FACE 4
Volume mesh:
Number of nodes = 3789
Number of elements = 18890
Number of triangles = 5566
Number of quadrilatarals = 0
Number of tetrahedrals = 13324
Number of pyramids = 0
Number of prisms = 0
Number of hexahedrals = 0
Writing VTK file: volume.vtk....
Finished writing VTK file
Writing exodus file ....
Block: 'tableTop', blk_id 1, num_entries 7791
Block: 'leg0', blk_id 2, num_entries 1409
Block: 'leg1', blk_id 3, num_entries 1369
Block: 'leg2', blk_id 4, num_entries 1392
Block: 'leg3', blk_id 5, num_entries 1363
Sideset: 'leg0Side', set_id 1, num_entries 598
Sideset: 'leg1Side', set_id 2, num_entries 592
Sideset: 'leg2Side', set_id 3, num_entries 598
Sideset: 'leg3Side', set_id 4, num_entries 592
Sideset: 'tableTopSide', set_id 5, num_entries 3186
Nodeset: 'edge', set_id 1, num_entries 25
Nodeset: 'face1', set_id 2, num_entries 244
Nodeset: 'face2', set_id 3, num_entries 248
Nodeset: 'node', set_id 4, num_entries 1
Finished writing Exodus file
==1783279==
==1783279== HEAP SUMMARY:
==1783279== in use at exit: 4,170,651 bytes in 24,683 blocks
==1783279== total heap usage: 1,672,072 allocs, 1,647,389 frees, 1,183,180,235 bytes allocated
==1783279==
==1783279== LEAK SUMMARY:
==1783279== definitely lost: 0 bytes in 0 blocks
==1783279== indirectly lost: 0 bytes in 0 blocks
==1783279== possibly lost: 0 bytes in 0 blocks
==1783279== still reachable: 0 bytes in 0 blocks
==1783279== suppressed: 4,170,651 bytes in 24,683 blocks
==1783279==
==1783279== For lists of detected and suppressed errors, rerun with: -s
==1783279== ERROR SUMMARY: 0 errors from 0 contexts (suppressed: 1869 from 1869)
47.48user 0.74system 0:48.22elapsed 100%CPU (0avgtext+0avgdata 366404maxresident)k
0inputs+10736outputs (0major+360813minor)pagefaults 0swaps
real 0m48.228s
user 0m47.485s
sys 0m0.785s
+ status=0
+ set +x
=================================================
CAPS verification (using pyCAPS) case plato_aflr_table_PyTest.py passed (as expected)
=================================================
=================================================
+ echo 'plato_aflr_table_morph_PyTest.py test;'
+ tee -a /jenkins/workspace/ESP_ValgrindCaps/7.4/CAPS/STRUCTURE/LINUX64/ESP/LINUX64/examples/regressionTest/pyCAPSlog.txt
plato_aflr_table_morph_PyTest.py test;
+ time valgrind --tool=memcheck --error-exitcode=0 --leak-check=yes --show-leak-kinds=all --keep-debuginfo=yes --gen-suppressions=all --max-stackframe=4000000 --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.4/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-AFLR.supp --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.4/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-exodus.supp --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.4/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-IRIT.supp --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.4/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-MKL.supp --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.4/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-python.supp --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.4/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-Tblade3.supp --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.4/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-Ubuntu.supp --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.4/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-OCC7.4.supp python -u plato_aflr_table_morph_PyTest.py -outLevel=0
+ tee -a /jenkins/workspace/ESP_ValgrindCaps/7.4/CAPS/STRUCTURE/LINUX64/ESP/LINUX64/examples/regressionTest/pyCAPSlog.txt
==1785007== Memcheck, a memory error detector
==1785007== Copyright (C) 2002-2017, and GNU GPL'd, by Julian Seward et al.
==1785007== Using Valgrind-3.18.1 and LibVEX; rerun with -h for copyright info
==1785007== Command: python -u plato_aflr_table_morph_PyTest.py -outLevel=0
==1785007==
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 5
Name = tableTopSide, index = 1
Name = leg0Side, index = 2
Name = leg1Side, index = 3
Name = leg2Side, index = 4
Name = leg3Side, index = 5
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 0
AFLR2 : ---------------------------------------
AFLR2 : AFLR2 LIBRARY
AFLR2 : ADVANCING-FRONT/LOCAL-RECONNECTION
AFLR2 : TRIA/QUAD GRID GENERATOR
AFLR2 : Version Number 9.14.6
AFLR2 : Version Date 11/20/22 @ 09:21PM
AFLR2 : Compile OS Linux 3.10.0-957.27.2.el7.x86_64 x86_64
AFLR2 : Compile Date 11/21/22 @ 12:54PM
AFLR2 : Copyright 1994-2021, D.L. Marcum
AFLR2 : ---------------------------------------
AFLR4 : ---------------------------------------
AFLR4 : AFLR4 LIBRARY
AFLR4 : ADVANCING-FRONT/LOCAL-RECONNECTION
AFLR4 : TRIA/QUAD SURFACE GRID GENERATOR
AFLR4 : Version Number 11.3.15
AFLR4 : Version Date 12/07/22 @ 10:53AM
AFLR4 : Compile OS Linux 3.10.0-957.27.2.el7.x86_64 x86_64
AFLR4 : Compile Date 12/11/22 @ 11:55AM
AFLR4 : Copyright 1994-2021, D.L. Marcum
AFLR4 : ---------------------------------------
EGADS : ---------------------------------------
EGADS : Engineering Geometry Aircraft Design System
EGADS : Version 1.23
EGADS : OpenCASCADE Version 7.4.1
EGADS : ---------------------------------------
EGADS : EGADS CAD Geometry Setup
EGADS : Model has 5 Active Bodies
EGADS : Body 0 is a SolidBody
EGADS : Body 0 has 1 Shells
EGADS : Body 0 has 6 Faces
EGADS : Body 0 has 12 Edges
EGADS : Body 0 has 6 Loops
EGADS : Body 0 has 8 Nodes
EGADS : Body 1 is a SolidBody
EGADS : Body 1 has 1 Shells
EGADS : Body 1 has 4 Faces
EGADS : Body 1 has 6 Edges
EGADS : Body 1 has 4 Loops
EGADS : Body 1 has 4 Nodes
EGADS : Body 2 is a SolidBody
EGADS : Body 2 has 1 Shells
EGADS : Body 2 has 4 Faces
EGADS : Body 2 has 6 Edges
EGADS : Body 2 has 4 Loops
EGADS : Body 2 has 4 Nodes
EGADS : Body 3 is a SolidBody
EGADS : Body 3 has 1 Shells
EGADS : Body 3 has 4 Faces
EGADS : Body 3 has 6 Edges
EGADS : Body 3 has 4 Loops
EGADS : Body 3 has 4 Nodes
EGADS : Body 4 is a SolidBody
EGADS : Body 4 has 1 Shells
EGADS : Body 4 has 4 Faces
EGADS : Body 4 has 6 Edges
EGADS : Body 4 has 4 Loops
EGADS : Body 4 has 4 Nodes
EGADS : Check Grid BCs
EGADS : Grid BCs are OK
EGADS : Face Neighbor-Faces Information
EGADS : QC = Face Quad Combination Flag
EGADS : IER = Face Isolated Edge Refinement Flag
EGADS : ER = Face Edge Refinement Factor
EGADS : Not applicable for Faces with a FarField Grid BC.
EGADS : SF = Face Scale Factor
EGADS : Not applicable for Faces with a FarField Grid BC.
EGADS : Face Body QC IER ER Scale Neighbor
EGADS : ID Active ID Flag Flag Weight Factor Faces
EGADS : 1 Yes 0 0 1 0 1 3 4 5 6
EGADS : 2 Yes 0 0 1 0 1 3 4 5 6
EGADS : 3 Yes 0 0 1 0 1 1 2 5 6
EGADS : 4 Yes 0 0 1 0 1 1 2 5 6
EGADS : 5 Yes 0 0 1 0 1 1 2 3 4
EGADS : 6 Yes 0 0 1 0 1 1 2 3 4
EGADS : 7 Yes 1 0 1 0 1 8 9 10
EGADS : 8 Yes 1 0 1 0 1 7 9 10
EGADS : 9 Yes 1 0 1 0 1 7 8
EGADS : 10 Yes 1 0 1 0 1 7 8
EGADS : 11 Yes 2 0 1 0 1 12 13 14
EGADS : 12 Yes 2 0 1 0 1 11 13 14
EGADS : 13 Yes 2 0 1 0 1 11 12
EGADS : 14 Yes 2 0 1 0 1 11 12
EGADS : 15 Yes 3 0 1 0 1 16 17 18
EGADS : 16 Yes 3 0 1 0 1 15 17 18
EGADS : 17 Yes 3 0 1 0 1 15 16
EGADS : 18 Yes 3 0 1 0 1 15 16
EGADS : 19 Yes 4 0 1 0 1 20 21 22
EGADS : 20 Yes 4 0 1 0 1 19 21 22
EGADS : 21 Yes 4 0 1 0 1 19 20
EGADS : 22 Yes 4 0 1 0 1 19 20
EGADS : Face Edges Information
EGADS : Face Edges
EGADS : 1 1 2 -3 -4
EGADS : 2 -5 8 7 -6
EGADS : 3 9 5 -10 -1
EGADS : 4 -11 3 12 -7
EGADS : 5 4 11 -8 -9
EGADS : 6 -2 10 6 -12
EGADS : 7 -13 -14 15 16
EGADS : 8 17 14 -18 -16
EGADS : 9 13 18
EGADS : 10 -15 -17
EGADS : 11 -19 -20 21 22
EGADS : 12 23 20 -24 -22
EGADS : 13 19 24
EGADS : 14 -21 -23
EGADS : 15 -25 -26 27 28
EGADS : 16 29 26 -30 -28
EGADS : 17 25 30
EGADS : 18 -27 -29
EGADS : 19 -31 -32 33 34
EGADS : 20 35 32 -36 -34
EGADS : 21 31 36
EGADS : 22 -33 -35
EGADS : Face Loops Information
EGADS : Face Loops
EGADS : 1 1
EGADS : 2 2
EGADS : 3 3
EGADS : 4 4
EGADS : 5 5
EGADS : 6 6
EGADS : 7 7
EGADS : 8 8
EGADS : 9 9
EGADS : 10 10
EGADS : 11 11
EGADS : 12 12
EGADS : 13 13
EGADS : 14 14
EGADS : 15 15
EGADS : 16 16
EGADS : 17 17
EGADS : 18 18
EGADS : 19 19
EGADS : 20 20
EGADS : 21 21
EGADS : 22 22
EGADS : Loop Edges Information
EGADS : Loop Active Sense Edges
EGADS : 1 Yes 1 1 2 -3 -4
EGADS : 2 Yes 1 -5 8 7 -6
EGADS : 3 Yes 1 9 5 -10 -1
EGADS : 4 Yes 1 -11 3 12 -7
EGADS : 5 Yes 1 4 11 -8 -9
EGADS : 6 Yes 1 -2 10 6 -12
EGADS : 7 Yes 1 -13 -14 15 16
EGADS : 8 Yes 1 17 14 -18 -16
EGADS : 9 Yes 1 13 18
EGADS : 10 Yes 1 -15 -17
EGADS : 11 Yes 1 -19 -20 21 22
EGADS : 12 Yes 1 23 20 -24 -22
EGADS : 13 Yes 1 19 24
EGADS : 14 Yes 1 -21 -23
EGADS : 15 Yes 1 -25 -26 27 28
EGADS : 16 Yes 1 29 26 -30 -28
EGADS : 17 Yes 1 25 30
EGADS : 18 Yes 1 -27 -29
EGADS : 19 Yes 1 -31 -32 33 34
EGADS : 20 Yes 1 35 32 -36 -34
EGADS : 21 Yes 1 31 36
EGADS : 22 Yes 1 -33 -35
EGADS : Edge Node, Scale Factor, and Neighbor-Faces Information
EGADS : ESF = Edge Scale Factor
EGADS : Not applicable for DEGENERATE Edges or Edges with a FarField
EGADS : Grid BC Neighbor Face.
EGADS : Neighbor
EGADS : Edge Body Active Node1 Node2 ESF Faces
EGADS : 1 0 Yes 2 1 1 1 3
EGADS : 2 0 Yes 1 3 1 1 6
EGADS : 3 0 Yes 4 3 1 1 4
EGADS : 4 0 Yes 2 4 1 1 5
EGADS : 5 0 Yes 6 5 1 2 3
EGADS : 6 0 Yes 5 7 1 2 6
EGADS : 7 0 Yes 8 7 1 2 4
EGADS : 8 0 Yes 6 8 1 2 5
EGADS : 9 0 Yes 2 6 1 3 5
EGADS : 10 0 Yes 1 5 1 3 6
EGADS : 11 0 Yes 4 8 1 4 5
EGADS : 12 0 Yes 3 7 1 4 6
EGADS : 13 1 Yes 10 9 1 7 9
EGADS : 14 1 Yes 11 10 1 7 8
EGADS : 15 1 Yes 11 12 1 7 10
EGADS : 16 1 Yes 12 9 1 7 8
EGADS : 17 1 Yes 12 11 1 8 10
EGADS : 18 1 Yes 9 10 1 8 9
EGADS : 19 2 Yes 14 13 1 11 13
EGADS : 20 2 Yes 15 14 1 11 12
EGADS : 21 2 Yes 15 16 1 11 14
EGADS : 22 2 Yes 16 13 1 11 12
EGADS : 23 2 Yes 16 15 1 12 14
EGADS : 24 2 Yes 13 14 1 12 13
EGADS : 25 3 Yes 18 17 1 15 17
EGADS : 26 3 Yes 19 18 1 15 16
EGADS : 27 3 Yes 19 20 1 15 18
EGADS : 28 3 Yes 20 17 1 15 16
EGADS : 29 3 Yes 20 19 1 16 18
EGADS : 30 3 Yes 17 18 1 16 17
EGADS : 31 4 Yes 22 21 1 19 21
EGADS : 32 4 Yes 23 22 1 19 20
EGADS : 33 4 Yes 23 24 1 19 22
EGADS : 34 4 Yes 24 21 1 19 20
EGADS : 35 4 Yes 24 23 1 20 22
EGADS : 36 4 Yes 21 22 1 20 21
EGADS : Node Information
EGADS : Node Active Coordinates
EGADS : 1 Yes 0 0 0.5
EGADS : 2 Yes 0 0 0
EGADS : 3 Yes 0 0.1 0.5
EGADS : 4 Yes 0 0.1 0
EGADS : 5 Yes 0.5 0 0.5
EGADS : 6 Yes 0.5 0 0
EGADS : 7 Yes 0.5 0.1 0.5
EGADS : 8 Yes 0.5 0.1 0
EGADS : 9 Yes 0 0 0
EGADS : 10 Yes 0 0 0
EGADS : 11 Yes 0 0 0
EGADS : 12 Yes 0 0 0
EGADS : 13 Yes 0 0 0.26
EGADS : 14 Yes 0 0 0.46
EGADS : 15 Yes 0 0 0.46
EGADS : 16 Yes 0 0 0.26
EGADS : 17 Yes 0.36 0 0.26
EGADS : 18 Yes 0.36 0 0.46
EGADS : 19 Yes 0.36 0 0.46
EGADS : 20 Yes 0.36 0 0.26
EGADS : 21 Yes 0.36 0 0
EGADS : 22 Yes 0.36 0 0
EGADS : 23 Yes 0.36 0 0
EGADS : 24 Yes 0.36 0 0
AFLR4 : Surface Mesh Spacing Setup
AFLR4 : Max Bounding Box Length = 1
AFLR4 : Min Bounding Box Length = 0.7
AFLR4 : Max Ref Bounding Box Length = 1
AFLR4 : Min Ref Bounding Box Length = 0.7
AFLR4 : Reference Length = 10
AFLR4 : BL Thickness = 0
AFLR4 : Abs Min Surf Spacing = 0.025
AFLR4 : Min Surf Spacing = 0.05
AFLR4 : Max Surf Spacing = 1
AFLR4 : Global Scale Factor = 1
AFLR4 : Geometry Definition Information
AFLR4 : Definition Definition Composite Grid BC
AFLR4 : ID Type ID Type
AFLR4 : 0 glue-only composite - -
AFLR4 : 1 CAD geometry 0 STD w/BL
AFLR4 : 2 CAD geometry 0 STD w/BL
AFLR4 : 3 CAD geometry 0 STD w/BL
AFLR4 : 4 CAD geometry 0 STD w/BL
AFLR4 : 5 CAD geometry 0 STD w/BL
AFLR4 : 6 CAD geometry 0 STD w/BL
AFLR4 : 7 CAD geometry 0 STD w/BL
AFLR4 : 8 CAD geometry 0 STD w/BL
AFLR4 : 9 CAD geometry 0 STD w/BL
AFLR4 : 10 CAD geometry 0 STD w/BL
AFLR4 : 11 CAD geometry 0 STD w/BL
AFLR4 : 12 CAD geometry 0 STD w/BL
AFLR4 : 13 CAD geometry 0 STD w/BL
AFLR4 : 14 CAD geometry 0 STD w/BL
AFLR4 : 15 CAD geometry 0 STD w/BL
AFLR4 : 16 CAD geometry 0 STD w/BL
AFLR4 : 17 CAD geometry 0 STD w/BL
AFLR4 : 18 CAD geometry 0 STD w/BL
AFLR4 : 19 CAD geometry 0 STD w/BL
AFLR4 : 20 CAD geometry 0 STD w/BL
AFLR4 : 21 CAD geometry 0 STD w/BL
AFLR4 : 22 CAD geometry 0 STD w/BL
AFLR4 : Case has 5 Proximity Checking Components
AFLR4 : Component 1 includes Definitions 1 2 3 4 5 6
AFLR4 : Component 2 includes Definitions 7 8 9 10
AFLR4 : Component 3 includes Definitions 11 12 13 14
AFLR4 : Component 4 includes Definitions 15 16 17 18
AFLR4 : Component 5 includes Definitions 19 20 21 22
AFLR4 : Define CAD surface definition 1
AFLR4 : Define CAD surface definition 2
AFLR4 : Define CAD surface definition 3
AFLR4 : Define CAD surface definition 4
AFLR4 : Define CAD surface definition 5
AFLR4 : Define CAD surface definition 6
AFLR4 : Define CAD surface definition 7
AFLR4 : Define CAD surface definition 8
AFLR4 : Define CAD surface definition 9
AFLR4 : Define CAD surface definition 10
AFLR4 : Define CAD surface definition 11
AFLR4 : Define CAD surface definition 12
AFLR4 : Define CAD surface definition 13
AFLR4 : Define CAD surface definition 14
AFLR4 : Define CAD surface definition 15
AFLR4 : Define CAD surface definition 16
AFLR4 : Define CAD surface definition 17
AFLR4 : Define CAD surface definition 18
AFLR4 : Define CAD surface definition 19
AFLR4 : Define CAD surface definition 20
AFLR4 : Define CAD surface definition 21
AFLR4 : Define CAD surface definition 22
AFLR4 : Surface Grid Generation
AFLR4 : Generate optimal mesh on surface definition 1
AFLR2 : Nodes, Trias,Quads= 9 10 0
AFLR4 : Nodes, Trias,Quads= 6 4 0
AFLR4 : Generate optimal mesh on surface definition 2
AFLR2 : Nodes, Trias,Quads= 9 10 0
AFLR4 : Nodes, Trias,Quads= 6 4 0
AFLR4 : Generate optimal mesh on surface definition 3
AFLR2 : Nodes, Trias,Quads= 12 14 0
AFLR4 : Nodes, Trias,Quads= 8 6 0
AFLR4 : Generate optimal mesh on surface definition 4
AFLR2 : Nodes, Trias,Quads= 12 14 0
AFLR4 : Nodes, Trias,Quads= 8 6 0
AFLR4 : Generate optimal mesh on surface definition 5
AFLR2 : Nodes, Trias,Quads= 9 10 0
AFLR4 : Nodes, Trias,Quads= 6 4 0
AFLR4 : Generate optimal mesh on surface definition 6
AFLR2 : Nodes, Trias,Quads= 9 10 0
AFLR4 : Nodes, Trias,Quads= 6 4 0
AFLR4 : Generate optimal mesh on surface definition 7
AFLR2 : Nodes, Trias,Quads= 118 194 0
AFLR4 : Nodes, Trias,Quads= 117 192 0
AFLR4 : Generate optimal mesh on surface definition 8
AFLR2 : Nodes, Trias,Quads= 118 194 0
AFLR4 : Nodes, Trias,Quads= 117 192 0
AFLR4 : Generate optimal mesh on surface definition 9
AFLR2 : Nodes, Trias,Quads= 30 42 0
AFLR4 : Nodes, Trias,Quads= 22 26 0
AFLR4 : Generate optimal mesh on surface definition 10
AFLR2 : Nodes, Trias,Quads= 31 44 0
AFLR4 : Nodes, Trias,Quads= 23 28 0
AFLR4 : Generate optimal mesh on surface definition 11
AFLR2 : Nodes, Trias,Quads= 118 194 0
AFLR4 : Nodes, Trias,Quads= 117 192 0
AFLR4 : Generate optimal mesh on surface definition 12
AFLR2 : Nodes, Trias,Quads= 118 194 0
AFLR4 : Nodes, Trias,Quads= 117 192 0
AFLR4 : Generate optimal mesh on surface definition 13
AFLR2 : Nodes, Trias,Quads= 30 42 0
AFLR4 : Nodes, Trias,Quads= 22 26 0
AFLR4 : Generate optimal mesh on surface definition 14
AFLR2 : Nodes, Trias,Quads= 31 44 0
AFLR4 : Nodes, Trias,Quads= 23 28 0
AFLR4 : Generate optimal mesh on surface definition 15
AFLR2 : Nodes, Trias,Quads= 118 194 0
AFLR4 : Nodes, Trias,Quads= 117 192 0
AFLR4 : Generate optimal mesh on surface definition 16
AFLR2 : Nodes, Trias,Quads= 118 194 0
AFLR4 : Nodes, Trias,Quads= 117 192 0
AFLR4 : Generate optimal mesh on surface definition 17
AFLR2 : Nodes, Trias,Quads= 30 42 0
AFLR4 : Nodes, Trias,Quads= 22 26 0
AFLR4 : Generate optimal mesh on surface definition 18
AFLR2 : Nodes, Trias,Quads= 31 44 0
AFLR4 : Nodes, Trias,Quads= 23 28 0
AFLR4 : Generate optimal mesh on surface definition 19
AFLR2 : Nodes, Trias,Quads= 118 194 0
AFLR4 : Nodes, Trias,Quads= 117 192 0
AFLR4 : Generate optimal mesh on surface definition 20
AFLR2 : Nodes, Trias,Quads= 118 194 0
AFLR4 : Nodes, Trias,Quads= 117 192 0
AFLR4 : Generate optimal mesh on surface definition 21
AFLR2 : Nodes, Trias,Quads= 30 42 0
AFLR4 : Nodes, Trias,Quads= 22 26 0
AFLR4 : Generate optimal mesh on surface definition 22
AFLR2 : Nodes, Trias,Quads= 31 44 0
AFLR4 : Nodes, Trias,Quads= 23 28 0
DGEOM : Add surface definitions to composite definition 0
DGEOM : Glue composite surface definition 0
DGEOM : Nodes,Faces,BEdges= 900 1780 488
AFLR4 : Curvature BG Surface Grid Generation
AFLR4 : Nodes, Trias = 900 1780
AFLR4 : Surface Grid Generation
AFLR4 : Generate optimal mesh on surface definition 1
AFLR2 : Nodes, Trias,Quads= 11 13 0
AFLR4 : Nodes, Trias,Quads= 7 5 0
AFLR4 : Generate optimal mesh on surface definition 2
AFLR2 : Nodes, Trias,Quads= 11 13 0
AFLR4 : Nodes, Trias,Quads= 7 5 0
AFLR4 : Generate optimal mesh on surface definition 3
AFLR2 : Nodes, Trias,Quads= 15 18 0
AFLR4 : Nodes, Trias,Quads= 11 10 0
AFLR4 : Generate optimal mesh on surface definition 4
AFLR2 : Nodes, Trias,Quads= 15 18 0
AFLR4 : Nodes, Trias,Quads= 11 10 0
AFLR4 : Generate optimal mesh on surface definition 5
AFLR2 : Nodes, Trias,Quads= 11 13 0
AFLR4 : Nodes, Trias,Quads= 7 5 0
AFLR4 : Generate optimal mesh on surface definition 6
AFLR2 : Nodes, Trias,Quads= 11 13 0
AFLR4 : Nodes, Trias,Quads= 7 5 0
AFLR4 : Generate optimal mesh on surface definition 7
AFLR2 : Nodes, Trias,Quads= 126 210 0
AFLR4 : Nodes, Trias,Quads= 120 198 0
AFLR4 : Generate optimal mesh on surface definition 8
AFLR2 : Nodes, Trias,Quads= 126 210 0
AFLR4 : Nodes, Trias,Quads= 120 198 0
AFLR4 : Generate optimal mesh on surface definition 9
AFLR2 : Nodes, Trias,Quads= 25 34 0
AFLR4 : Nodes, Trias,Quads= 21 26 0
AFLR4 : Generate optimal mesh on surface definition 10
AFLR2 : Nodes, Trias,Quads= 25 34 0
AFLR4 : Nodes, Trias,Quads= 21 26 0
AFLR4 : Generate optimal mesh on surface definition 11
AFLR2 : Nodes, Trias,Quads= 126 210 0
AFLR4 : Nodes, Trias,Quads= 120 198 0
AFLR4 : Generate optimal mesh on surface definition 12
AFLR2 : Nodes, Trias,Quads= 126 210 0
AFLR4 : Nodes, Trias,Quads= 120 198 0
AFLR4 : Generate optimal mesh on surface definition 13
AFLR2 : Nodes, Trias,Quads= 25 34 0
AFLR4 : Nodes, Trias,Quads= 21 26 0
AFLR4 : Generate optimal mesh on surface definition 14
AFLR2 : Nodes, Trias,Quads= 25 34 0
AFLR4 : Nodes, Trias,Quads= 21 26 0
AFLR4 : Generate optimal mesh on surface definition 15
AFLR2 : Nodes, Trias,Quads= 126 210 0
AFLR4 : Nodes, Trias,Quads= 120 198 0
AFLR4 : Generate optimal mesh on surface definition 16
AFLR2 : Nodes, Trias,Quads= 126 210 0
AFLR4 : Nodes, Trias,Quads= 120 198 0
AFLR4 : Generate optimal mesh on surface definition 17
AFLR2 : Nodes, Trias,Quads= 25 34 0
AFLR4 : Nodes, Trias,Quads= 21 26 0
AFLR4 : Generate optimal mesh on surface definition 18
AFLR2 : Nodes, Trias,Quads= 25 34 0
AFLR4 : Nodes, Trias,Quads= 21 26 0
AFLR4 : Generate optimal mesh on surface definition 19
AFLR2 : Nodes, Trias,Quads= 126 210 0
AFLR4 : Nodes, Trias,Quads= 120 198 0
AFLR4 : Generate optimal mesh on surface definition 20
AFLR2 : Nodes, Trias,Quads= 126 210 0
AFLR4 : Nodes, Trias,Quads= 120 198 0
AFLR4 : Generate optimal mesh on surface definition 21
AFLR2 : Nodes, Trias,Quads= 25 34 0
AFLR4 : Nodes, Trias,Quads= 21 26 0
AFLR4 : Generate optimal mesh on surface definition 22
AFLR2 : Nodes, Trias,Quads= 25 34 0
AFLR4 : Nodes, Trias,Quads= 21 26 0
DGEOM : Add surface definitions to composite definition 0
DGEOM : Glue composite surface definition 0
DGEOM : Nodes,Faces,BEdges= 926 1832 480
AFLR4 : Proximity BG Surface Grid Generation
AFLR4 : Nodes, Trias = 986 1952
AFLR4 : Nodes, Trias = 1206 2392
AFLR4 : Nodes, Trias = 1760 3500
AFLR4 : Nodes, Trias = 2067 4114
AFLR4 : Nodes, Trias = 2106 4192
AFLR4 : Nodes, Trias = 2108 4196
AFLR4 : Surface Grid Generation
AFLR4 : Generate optimal mesh on surface definition 1
AFLR2 : Nodes, Trias,Quads= 110 160 0
AFLR4 : Nodes, Trias,Quads= 120 180 0
AFLR4 : Generate optimal mesh on surface definition 2
AFLR2 : Nodes, Trias,Quads= 119 175 0
AFLR4 : Nodes, Trias,Quads= 126 189 0
AFLR4 : Generate optimal mesh on surface definition 3
AFLR2 : Nodes, Trias,Quads= 992 1859 0
AFLR4 : Nodes, Trias,Quads= 706 1287 0
AFLR4 : Generate optimal mesh on surface definition 4
AFLR2 : Nodes, Trias,Quads= 625 1152 0
AFLR4 : Nodes, Trias,Quads= 618 1138 0
AFLR4 : Generate optimal mesh on surface definition 5
AFLR2 : Nodes, Trias,Quads= 115 167 0
AFLR4 : Nodes, Trias,Quads= 128 193 0
AFLR4 : Generate optimal mesh on surface definition 6
AFLR2 : Nodes, Trias,Quads= 127 189 0
AFLR4 : Nodes, Trias,Quads= 132 199 0
AFLR4 : Generate optimal mesh on surface definition 7
AFLR2 : Nodes, Trias,Quads= 155 262 0
AFLR4 : Nodes, Trias,Quads= 145 242 0
AFLR4 : Generate optimal mesh on surface definition 8
AFLR2 : Nodes, Trias,Quads= 165 280 0
AFLR4 : Nodes, Trias,Quads= 156 262 0
AFLR4 : Generate optimal mesh on surface definition 9
AFLR2 : Nodes, Trias,Quads= 62 100 0
AFLR4 : Nodes, Trias,Quads= 47 70 0
AFLR4 : Generate optimal mesh on surface definition 10
AFLR2 : Nodes, Trias,Quads= 26 36 0
AFLR4 : Nodes, Trias,Quads= 20 24 0
AFLR4 : Generate optimal mesh on surface definition 11
AFLR2 : Nodes, Trias,Quads= 154 260 0
AFLR4 : Nodes, Trias,Quads= 144 240 0
AFLR4 : Generate optimal mesh on surface definition 12
AFLR2 : Nodes, Trias,Quads= 168 286 0
AFLR4 : Nodes, Trias,Quads= 154 258 0
AFLR4 : Generate optimal mesh on surface definition 13
AFLR2 : Nodes, Trias,Quads= 63 102 0
AFLR4 : Nodes, Trias,Quads= 47 70 0
AFLR4 : Generate optimal mesh on surface definition 14
AFLR2 : Nodes, Trias,Quads= 26 36 0
AFLR4 : Nodes, Trias,Quads= 20 24 0
AFLR4 : Generate optimal mesh on surface definition 15
AFLR2 : Nodes, Trias,Quads= 163 276 0
AFLR4 : Nodes, Trias,Quads= 156 262 0
AFLR4 : Generate optimal mesh on surface definition 16
AFLR2 : Nodes, Trias,Quads= 155 262 0
AFLR4 : Nodes, Trias,Quads= 145 242 0
AFLR4 : Generate optimal mesh on surface definition 17
AFLR2 : Nodes, Trias,Quads= 63 102 0
AFLR4 : Nodes, Trias,Quads= 47 70 0
AFLR4 : Generate optimal mesh on surface definition 18
AFLR2 : Nodes, Trias,Quads= 26 36 0
AFLR4 : Nodes, Trias,Quads= 20 24 0
AFLR4 : Generate optimal mesh on surface definition 19
AFLR2 : Nodes, Trias,Quads= 166 282 0
AFLR4 : Nodes, Trias,Quads= 156 262 0
AFLR4 : Generate optimal mesh on surface definition 20
AFLR2 : Nodes, Trias,Quads= 158 267 0
AFLR4 : Nodes, Trias,Quads= 145 241 0
AFLR4 : Generate optimal mesh on surface definition 21
AFLR2 : Nodes, Trias,Quads= 67 109 0
AFLR4 : Nodes, Trias,Quads= 45 65 0
AFLR4 : Generate optimal mesh on surface definition 22
AFLR2 : Nodes, Trias,Quads= 26 36 0
AFLR4 : Nodes, Trias,Quads= 20 24 0
DGEOM : Add surface definitions to composite definition 0
DGEOM : Glue composite surface definition 0
DGEOM : Nodes,Faces,BEdges= 2793 5566 984
OVERALL : CPU Time = 4.524 seconds
Body 1 (of 5)
Number of nodes = 1595
Number of elements = 3186
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 3186
Number of quadrilateral elements = 0
Body 2 (of 5)
Number of nodes = 301
Number of elements = 598
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 598
Number of quadrilateral elements = 0
Body 3 (of 5)
Number of nodes = 298
Number of elements = 592
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 592
Number of quadrilateral elements = 0
Body 4 (of 5)
Number of nodes = 301
Number of elements = 598
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 598
Number of quadrilateral elements = 0
Body 5 (of 5)
Number of nodes = 298
Number of elements = 592
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 592
Number of quadrilateral elements = 0
----------------------------
Total number of nodes = 2793
Total number of elements = 5566
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 5
Name = tableTopSide, index = 1
Name = leg0Side, index = 2
Name = leg1Side, index = 3
Name = leg2Side, index = 4
Name = leg3Side, index = 5
Getting volume mesh for body 1 (of 5)
AFLR2 : ---------------------------------------
AFLR2 : AFLR2 LIBRARY
AFLR2 : ADVANCING-FRONT/LOCAL-RECONNECTION
AFLR2 : TRIA/QUAD GRID GENERATOR
AFLR2 : Version Number 9.14.6
AFLR2 : Version Date 11/20/22 @ 09:21PM
AFLR2 : Compile OS Linux 3.10.0-957.27.2.el7.x86_64 x86_64
AFLR2 : Compile Date 11/21/22 @ 12:54PM
AFLR2 : Copyright 1994-2021, D.L. Marcum
AFLR2 : ---------------------------------------
AFLR4 : ---------------------------------------
AFLR4 : AFLR4 LIBRARY
AFLR4 : ADVANCING-FRONT/LOCAL-RECONNECTION
AFLR4 : TRIA/QUAD SURFACE GRID GENERATOR
AFLR4 : Version Number 11.3.15
AFLR4 : Version Date 12/07/22 @ 10:53AM
AFLR4 : Compile OS Linux 3.10.0-957.27.2.el7.x86_64 x86_64
AFLR4 : Compile Date 12/11/22 @ 11:55AM
AFLR4 : Copyright 1994-2021, D.L. Marcum
AFLR4 : ---------------------------------------
EGADS : ---------------------------------------
EGADS : Engineering Geometry Aircraft Design System
EGADS : Version 1.23
EGADS : OpenCASCADE Version 7.4.1
EGADS : ---------------------------------------
OVERALL : CPU Time = 5.767 seconds
DGEOM : Add surface definitions to composite definition 0
DGEOM : Glue composite surface definition 0
DGEOM : Nodes,Faces,BEdges= 1595 3186 462
UG PARAM : SETTING INPUT PARAMETERS FROM ARGUMENT VECTOR
UG PARAM : mrecm = 3
UG PARAM : mrecqm = 3
UG PARAM : SETTING INPUT PARAMETERS FROM ARGUMENT VECTOR
UG PARAM : mrecm = 3
UG PARAM : mrecqm = 3
UG PARAM : mpfrmt = 0
AFLR3 : ---------------------------------------
AFLR3 : AFLR3 LIBRARY
AFLR3 : ADVANCING-FRONT/LOCAL-RECONNECTION
AFLR3 : TETRAHEDRAL GRID GENERATOR
AFLR3 : Version Number 16.32.36
AFLR3 : Version Date 11/20/22 @ 09:28PM
AFLR3 : Compile OS Linux 3.10.0-957.27.2.el7.x86_64 x86_64
AFLR3 : Compile Date 12/11/22 @ 11:52AM
AFLR3 : Copyright 1994-2021, D.L. Marcum
AFLR3 : ---------------------------------------
AFLR3 IC : INPUT SURFACE GRID CHECK
AFLR3 IC : Nodes, Elements = 1595 0
UG3 : Boundary Conditions
UG3 : B-Face ID Boundary Condition
UG3 : 1 Solid
UG3 : 2 Solid
UG3 : 3 Solid
UG3 : 4 Solid
UG3 : 5 Solid
UG3 : 6 Solid
AFLR3 : CPU Time = 0.144 seconds
AFLR3 IG : INITIAL VOLUME GRID GENERATION
AFLR3 IG : Nodes, Elements = 1595 0
AFLR3 IG : Nodes, Elements = 8 10
AFLR3 IG : Nodes, Elements = 320 1689
AFLR3 IG : Nodes, Elements = 640 3362
AFLR3 IG : Nodes, Elements = 960 4997
AFLR3 IG : Nodes, Elements = 1280 6581
AFLR3 IG : Nodes, Elements = 1600 8125
AFLR3 IG : Nodes, Elements = 1602 8136
AFLR3 IG : Nodes, Elements = 1602 8097
AFLR3 IG : Nodes, Elements = 1595 4634
AFLR3 IG : Nodes, Elements = 1595 4673
AFLR3 IG : Nodes, Elements = 1595 4445
AFLR3 IG : Nodes, Elements = 1595 4438
AFLR3 : CPU Time = 0.781 seconds
AFLR3 GG : ISOTROPIC VOLUME GRID GENERATION
AFLR3 GG : Nodes, Elements = 1595 4438
AFLR3 GG : Nodes, Elements = 1920 5413
AFLR3 GG : Nodes, Elements = 1920 6730
AFLR3 GG : Nodes, Elements = 1920 6359
AFLR3 GG : Nodes, Elements = 2094 6881
AFLR3 GG : Nodes, Elements = 2094 7705
AFLR3 GG : Nodes, Elements = 2094 7426
AFLR3 GG : Nodes, Elements = 2148 7588
AFLR3 GG : Nodes, Elements = 2148 7831
AFLR3 GG : Nodes, Elements = 2148 7749
AFLR3 GG : Nodes, Elements = 2160 7785
AFLR3 GG : Nodes, Elements = 2160 7829
AFLR3 GG : Nodes, Elements = 2160 7816
AFLR3 GG : Nodes, Elements = 2162 7822
AFLR3 GG : Nodes, Elements = 2162 7826
AFLR3 : CPU Time = 0.749 seconds
AFLR3 QI : QUALITY IMPROVEMENT
AFLR3 QI : Nodes, Elements = 2162 7826
AFLR3 QI : Nodes, Elements = 2161 7821
AFLR3 QI : Nodes, Elements = 2161 7853
AFLR3 QI : Nodes, Elements = 2161 7820
AFLR3 QI : Nodes, Elements = 2161 7795
AFLR3 QI : Nodes, Elements = 2161 7799
AFLR3 QI : Nodes, Elements = 2161 7792
AFLR3 QI : Nodes, Elements = 2161 7791
AFLR3 : CPU Time = 0.347 seconds
AFLR3 : DONE
UG3 : DIHEDRAL ANGLE CHECK
UG3 : No. Tet Elems = 7791
UG3 : Min, Max Ang = 20.17 146.6
UG3 : Average Angle = 70.1
UG3 : No. Angle>160.0 = 0
UG3 : No. Angle>179.9 = 0
UG3 : VOL CHECK
UG3 : Total-Volume = 0.1
UG3 : No. Tet Elems = 7791
UG3 : Min Vol = 1.27e-06
UG3 : Average Vol = 1.28e-05
UG3 : Total-Tet-Vol = 0.1
UG3 : No. Vol<TOL = 0
UG3 : Q VOL-LENGTH-RATIO CHECK
2/3 2
UG3 : Q = c * Vol / sum( L )
UG3 : 0 <= Q <= 1
UG3 : No. Tet Elems = 7791
UG3 : Min, Max Q = 0.508 0.999
UG3 : Average Q = 0.86
UG3 : No. Q< 0.1 = 0
UG3 : No. Q< 0.01 = 0
UG3 : DIHEDRAL ANGLE CHECK
UG3 : No. Tet Elems = 7791
UG3 : Min, Max Ang = 20.17 146.6
UG3 : Average Angle = 70.1
UG3 : No. Angle>160.0 = 0
UG3 : No. Angle>179.9 = 0
UG3 : VOL CHECK
UG3 : Total-Volume = 0.1
UG3 : No. Tet Elems = 7791
UG3 : Min Vol = 1.27e-06
UG3 : Average Vol = 1.28e-05
UG3 : Total-Tet-Vol = 0.1
UG3 : No. Vol<TOL = 0
UG3 : Q VOL-LENGTH-RATIO CHECK
2/3 2
UG3 : Q = c * Vol / sum( L )
UG3 : 0 <= Q <= 1
UG3 : Note that L includes scaling for BL-aspect=ratio
UG3 : No. Tet Elems = 7791
UG3 : Min, Max Q = 0.522 1
UG3 : Average Q = 0.86
UG3 : No. Q< 0.1 = 0
UG3 : No. Q< 0.01 = 0
UG3 : CPU Time = 0.000 seconds
EGADS : ---------------------------------------
EGADS : Engineering Geometry Aircraft Design System
EGADS : Version 1.23
EGADS : OpenCASCADE Version 7.4.1
EGADS : ---------------------------------------
OVERALL : CPU Time = 5.520 seconds
EGADS : CREATE EGADS TESS FROM AFLR3 DATA
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 1
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 2
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 3
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 4
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 5
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 6
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 7
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 8
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 9
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 10
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 11
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 12
EGADS : CREATING TESSELLATION FOR BODY 0 FACE 1
EGADS : CREATING TESSELLATION FOR BODY 0 FACE 2
EGADS : CREATING TESSELLATION FOR BODY 0 FACE 3
EGADS : CREATING TESSELLATION FOR BODY 0 FACE 4
EGADS : CREATING TESSELLATION FOR BODY 0 FACE 5
EGADS : CREATING TESSELLATION FOR BODY 0 FACE 6
EGADS : EGADS TESS CREATED
EGADS : CHECK TESS GLOBAL FACE NODE MAP
EGADS : CHECKING NODE MAP FOR BODY 0 FACE 1
EGADS : CHECKING NODE MAP FOR BODY 0 FACE 2
EGADS : CHECKING NODE MAP FOR BODY 0 FACE 3
EGADS : CHECKING NODE MAP FOR BODY 0 FACE 4
EGADS : CHECKING NODE MAP FOR BODY 0 FACE 5
EGADS : CHECKING NODE MAP FOR BODY 0 FACE 6
Getting volume mesh for body 2 (of 5)
EGADS : ---------------------------------------
EGADS : Engineering Geometry Aircraft Design System
EGADS : Version 1.23
EGADS : OpenCASCADE Version 7.4.1
EGADS : ---------------------------------------
OVERALL : CPU Time = 0.425 seconds
DGEOM : Add surface definitions to composite definition 0
DGEOM : Glue composite surface definition 0
DGEOM : Nodes,Faces,BEdges= 301 598 130
UG PARAM : SETTING INPUT PARAMETERS FROM ARGUMENT VECTOR
UG PARAM : mrecm = 3
UG PARAM : mrecqm = 3
UG PARAM : SETTING INPUT PARAMETERS FROM ARGUMENT VECTOR
UG PARAM : mrecm = 3
UG PARAM : mrecqm = 3
UG PARAM : mpfrmt = 0
AFLR3 IC : INPUT SURFACE GRID CHECK
AFLR3 IC : Nodes, Elements = 301 0
UG3 : Boundary Conditions
UG3 : B-Face ID Boundary Condition
UG3 : 1 Solid
UG3 : 2 Solid
UG3 : 3 Solid
UG3 : 4 Solid
AFLR3 : CPU Time = 0.017 seconds
AFLR3 IG : INITIAL VOLUME GRID GENERATION
AFLR3 IG : Nodes, Elements = 301 0
AFLR3 IG : Nodes, Elements = 8 10
AFLR3 IG : Nodes, Elements = 62 338
AFLR3 IG : Nodes, Elements = 124 736
AFLR3 IG : Nodes, Elements = 186 1135
AFLR3 IG : Nodes, Elements = 248 1546
AFLR3 IG : Nodes, Elements = 308 1953
AFLR3 IG : Nodes, Elements = 301 1093
AFLR3 IG : Nodes, Elements = 301 941
AFLR3 IG : Nodes, Elements = 301 829
AFLR3 : CPU Time = 0.116 seconds
AFLR3 GG : ISOTROPIC VOLUME GRID GENERATION
AFLR3 GG : Nodes, Elements = 301 829
AFLR3 GG : Nodes, Elements = 349 973
AFLR3 GG : Nodes, Elements = 349 1076
AFLR3 GG : Nodes, Elements = 349 1030
AFLR3 GG : Nodes, Elements = 382 1129
AFLR3 GG : Nodes, Elements = 382 1292
AFLR3 GG : Nodes, Elements = 382 1245
AFLR3 GG : Nodes, Elements = 399 1296
AFLR3 GG : Nodes, Elements = 399 1370
AFLR3 GG : Nodes, Elements = 399 1349
AFLR3 GG : Nodes, Elements = 408 1376
AFLR3 GG : Nodes, Elements = 408 1409
AFLR3 GG : Nodes, Elements = 408 1393
AFLR3 GG : Nodes, Elements = 411 1402
AFLR3 GG : Nodes, Elements = 411 1411
AFLR3 GG : Nodes, Elements = 411 1410
AFLR3 : CPU Time = 0.131 seconds
AFLR3 QI : QUALITY IMPROVEMENT
AFLR3 QI : Nodes, Elements = 411 1410
AFLR3 QI : Nodes, Elements = 411 1425
AFLR3 QI : Nodes, Elements = 411 1412
AFLR3 QI : Nodes, Elements = 411 1410
AFLR3 QI : Nodes, Elements = 411 1411
AFLR3 QI : Nodes, Elements = 411 1409
AFLR3 : CPU Time = 0.055 seconds
AFLR3 : DONE
UG3 : DIHEDRAL ANGLE CHECK
UG3 : No. Tet Elems = 1409
UG3 : Min, Max Ang = 19.95 147.8
UG3 : Average Angle = 70.1
UG3 : No. Angle>160.0 = 0
UG3 : No. Angle>179.9 = 0
UG3 : VOL CHECK
UG3 : Total-Volume = 0.0184
UG3 : No. Tet Elems = 1409
UG3 : Min Vol = 1.17e-06
UG3 : Average Vol = 1.3e-05
UG3 : Total-Tet-Vol = 0.0184
UG3 : No. Vol<TOL = 0
UG3 : Q VOL-LENGTH-RATIO CHECK
2/3 2
UG3 : Q = c * Vol / sum( L )
UG3 : 0 <= Q <= 1
UG3 : No. Tet Elems = 1409
UG3 : Min, Max Q = 0.497 0.997
UG3 : Average Q = 0.86
UG3 : No. Q< 0.1 = 0
UG3 : No. Q< 0.01 = 0
UG3 : DIHEDRAL ANGLE CHECK
UG3 : No. Tet Elems = 1409
UG3 : Min, Max Ang = 19.95 147.8
UG3 : Average Angle = 70.1
UG3 : No. Angle>160.0 = 0
UG3 : No. Angle>179.9 = 0
UG3 : VOL CHECK
UG3 : Total-Volume = 0.0184
UG3 : No. Tet Elems = 1409
UG3 : Min Vol = 1.17e-06
UG3 : Average Vol = 1.3e-05
UG3 : Total-Tet-Vol = 0.0184
UG3 : No. Vol<TOL = 0
UG3 : Q VOL-LENGTH-RATIO CHECK
2/3 2
UG3 : Q = c * Vol / sum( L )
UG3 : 0 <= Q <= 1
UG3 : Note that L includes scaling for BL-aspect=ratio
UG3 : No. Tet Elems = 1409
UG3 : Min, Max Q = 0.556 1
UG3 : Average Q = 0.87
UG3 : No. Q< 0.1 = 0
UG3 : No. Q< 0.01 = 0
UG3 : CPU Time = 0.000 seconds
EGADS : ---------------------------------------
EGADS : Engineering Geometry Aircraft Design System
EGADS : Version 1.23
EGADS : OpenCASCADE Version 7.4.1
EGADS : ---------------------------------------
OVERALL : CPU Time = 0.412 seconds
EGADS : CREATE EGADS TESS FROM AFLR3 DATA
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 1
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 2
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 3
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 4
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 5
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 6
EGADS : CREATING TESSELLATION FOR BODY 0 FACE 1
EGADS : CREATING TESSELLATION FOR BODY 0 FACE 2
EGADS : CREATING TESSELLATION FOR BODY 0 FACE 3
EGADS : CREATING TESSELLATION FOR BODY 0 FACE 4
EGADS : EGADS TESS CREATED
EGADS : CHECK TESS GLOBAL FACE NODE MAP
EGADS : CHECKING NODE MAP FOR BODY 0 FACE 1
EGADS : CHECKING NODE MAP FOR BODY 0 FACE 2
EGADS : CHECKING NODE MAP FOR BODY 0 FACE 3
EGADS : CHECKING NODE MAP FOR BODY 0 FACE 4
Getting volume mesh for body 3 (of 5)
EGADS : ---------------------------------------
EGADS : Engineering Geometry Aircraft Design System
EGADS : Version 1.23
EGADS : OpenCASCADE Version 7.4.1
EGADS : ---------------------------------------
OVERALL : CPU Time = 0.410 seconds
DGEOM : Add surface definitions to composite definition 0
DGEOM : Glue composite surface definition 0
DGEOM : Nodes,Faces,BEdges= 298 592 130
UG PARAM : SETTING INPUT PARAMETERS FROM ARGUMENT VECTOR
UG PARAM : mrecm = 3
UG PARAM : mrecqm = 3
UG PARAM : SETTING INPUT PARAMETERS FROM ARGUMENT VECTOR
UG PARAM : mrecm = 3
UG PARAM : mrecqm = 3
UG PARAM : mpfrmt = 0
AFLR3 IC : INPUT SURFACE GRID CHECK
AFLR3 IC : Nodes, Elements = 298 0
UG3 : Boundary Conditions
UG3 : B-Face ID Boundary Condition
UG3 : 1 Solid
UG3 : 2 Solid
UG3 : 3 Solid
UG3 : 4 Solid
AFLR3 : CPU Time = 0.016 seconds
AFLR3 IG : INITIAL VOLUME GRID GENERATION
AFLR3 IG : Nodes, Elements = 298 0
AFLR3 IG : Nodes, Elements = 8 10
AFLR3 IG : Nodes, Elements = 62 343
AFLR3 IG : Nodes, Elements = 124 749
AFLR3 IG : Nodes, Elements = 186 1146
AFLR3 IG : Nodes, Elements = 248 1560
AFLR3 IG : Nodes, Elements = 305 1937
AFLR3 IG : Nodes, Elements = 298 1080
AFLR3 IG : Nodes, Elements = 298 937
AFLR3 IG : Nodes, Elements = 298 819
AFLR3 : CPU Time = 0.109 seconds
AFLR3 GG : ISOTROPIC VOLUME GRID GENERATION
AFLR3 GG : Nodes, Elements = 298 819
AFLR3 GG : Nodes, Elements = 342 951
AFLR3 GG : Nodes, Elements = 342 1044
AFLR3 GG : Nodes, Elements = 342 983
AFLR3 GG : Nodes, Elements = 376 1085
AFLR3 GG : Nodes, Elements = 376 1256
AFLR3 GG : Nodes, Elements = 376 1209
AFLR3 GG : Nodes, Elements = 395 1266
AFLR3 GG : Nodes, Elements = 395 1349
AFLR3 GG : Nodes, Elements = 395 1321
AFLR3 GG : Nodes, Elements = 401 1339
AFLR3 GG : Nodes, Elements = 401 1364
AFLR3 GG : Nodes, Elements = 401 1352
AFLR3 GG : Nodes, Elements = 403 1358
AFLR3 GG : Nodes, Elements = 403 1368
AFLR3 GG : Nodes, Elements = 403 1363
AFLR3 GG : Nodes, Elements = 405 1369
AFLR3 GG : Nodes, Elements = 405 1377
AFLR3 GG : Nodes, Elements = 405 1374
AFLR3 : CPU Time = 0.122 seconds
AFLR3 QI : QUALITY IMPROVEMENT
AFLR3 QI : Nodes, Elements = 405 1374
AFLR3 QI : Nodes, Elements = 405 1381
AFLR3 QI : Nodes, Elements = 405 1375
AFLR3 QI : Nodes, Elements = 405 1372
AFLR3 QI : Nodes, Elements = 405 1376
AFLR3 QI : Nodes, Elements = 405 1369
AFLR3 : CPU Time = 0.055 seconds
AFLR3 : DONE
UG3 : DIHEDRAL ANGLE CHECK
UG3 : No. Tet Elems = 1369
UG3 : Min, Max Ang = 21.02 132.9
UG3 : Average Angle = 70.2
UG3 : No. Angle>160.0 = 0
UG3 : No. Angle>179.9 = 0
UG3 : VOL CHECK
UG3 : Total-Volume = 0.0184
UG3 : No. Tet Elems = 1369
UG3 : Min Vol = 1.15e-06
UG3 : Average Vol = 1.34e-05
UG3 : Total-Tet-Vol = 0.0184
UG3 : No. Vol<TOL = 0
UG3 : Q VOL-LENGTH-RATIO CHECK
2/3 2
UG3 : Q = c * Vol / sum( L )
UG3 : 0 <= Q <= 1
UG3 : No. Tet Elems = 1369
UG3 : Min, Max Q = 0.578 0.999
UG3 : Average Q = 0.858
UG3 : No. Q< 0.1 = 0
UG3 : No. Q< 0.01 = 0
UG3 : DIHEDRAL ANGLE CHECK
UG3 : No. Tet Elems = 1369
UG3 : Min, Max Ang = 21.02 132.9
UG3 : Average Angle = 70.2
UG3 : No. Angle>160.0 = 0
UG3 : No. Angle>179.9 = 0
UG3 : VOL CHECK
UG3 : Total-Volume = 0.0184
UG3 : No. Tet Elems = 1369
UG3 : Min Vol = 1.15e-06
UG3 : Average Vol = 1.34e-05
UG3 : Total-Tet-Vol = 0.0184
UG3 : No. Vol<TOL = 0
UG3 : Q VOL-LENGTH-RATIO CHECK
2/3 2
UG3 : Q = c * Vol / sum( L )
UG3 : 0 <= Q <= 1
UG3 : Note that L includes scaling for BL-aspect=ratio
UG3 : No. Tet Elems = 1369
UG3 : Min, Max Q = 0.661 1
UG3 : Average Q = 0.873
UG3 : No. Q< 0.1 = 0
UG3 : No. Q< 0.01 = 0
UG3 : CPU Time = 0.000 seconds
EGADS : ---------------------------------------
EGADS : Engineering Geometry Aircraft Design System
EGADS : Version 1.23
EGADS : OpenCASCADE Version 7.4.1
EGADS : ---------------------------------------
OVERALL : CPU Time = 0.414 seconds
EGADS : CREATE EGADS TESS FROM AFLR3 DATA
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 1
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 2
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 3
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 4
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 5
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 6
EGADS : CREATING TESSELLATION FOR BODY 0 FACE 1
EGADS : CREATING TESSELLATION FOR BODY 0 FACE 2
EGADS : CREATING TESSELLATION FOR BODY 0 FACE 3
EGADS : CREATING TESSELLATION FOR BODY 0 FACE 4
EGADS : EGADS TESS CREATED
EGADS : CHECK TESS GLOBAL FACE NODE MAP
EGADS : CHECKING NODE MAP FOR BODY 0 FACE 1
EGADS : CHECKING NODE MAP FOR BODY 0 FACE 2
EGADS : CHECKING NODE MAP FOR BODY 0 FACE 3
EGADS : CHECKING NODE MAP FOR BODY 0 FACE 4
Getting volume mesh for body 4 (of 5)
EGADS : ---------------------------------------
EGADS : Engineering Geometry Aircraft Design System
EGADS : Version 1.23
EGADS : OpenCASCADE Version 7.4.1
EGADS : ---------------------------------------
OVERALL : CPU Time = 0.411 seconds
DGEOM : Add surface definitions to composite definition 0
DGEOM : Glue composite surface definition 0
DGEOM : Nodes,Faces,BEdges= 301 598 130
UG PARAM : SETTING INPUT PARAMETERS FROM ARGUMENT VECTOR
UG PARAM : mrecm = 3
UG PARAM : mrecqm = 3
UG PARAM : SETTING INPUT PARAMETERS FROM ARGUMENT VECTOR
UG PARAM : mrecm = 3
UG PARAM : mrecqm = 3
UG PARAM : mpfrmt = 0
AFLR3 IC : INPUT SURFACE GRID CHECK
AFLR3 IC : Nodes, Elements = 301 0
UG3 : Boundary Conditions
UG3 : B-Face ID Boundary Condition
UG3 : 1 Solid
UG3 : 2 Solid
UG3 : 3 Solid
UG3 : 4 Solid
AFLR3 : CPU Time = 0.016 seconds
AFLR3 IG : INITIAL VOLUME GRID GENERATION
AFLR3 IG : Nodes, Elements = 301 0
AFLR3 IG : Nodes, Elements = 8 10
AFLR3 IG : Nodes, Elements = 62 337
AFLR3 IG : Nodes, Elements = 124 738
AFLR3 IG : Nodes, Elements = 186 1163
AFLR3 IG : Nodes, Elements = 248 1543
AFLR3 IG : Nodes, Elements = 308 1980
AFLR3 IG : Nodes, Elements = 301 1112
AFLR3 IG : Nodes, Elements = 301 972
AFLR3 IG : Nodes, Elements = 301 823
AFLR3 : CPU Time = 0.116 seconds
AFLR3 GG : ISOTROPIC VOLUME GRID GENERATION
AFLR3 GG : Nodes, Elements = 301 823
AFLR3 GG : Nodes, Elements = 354 982
AFLR3 GG : Nodes, Elements = 354 1132
AFLR3 GG : Nodes, Elements = 354 1056
AFLR3 GG : Nodes, Elements = 382 1140
AFLR3 GG : Nodes, Elements = 382 1293
AFLR3 GG : Nodes, Elements = 382 1237
AFLR3 GG : Nodes, Elements = 399 1288
AFLR3 GG : Nodes, Elements = 399 1362
AFLR3 GG : Nodes, Elements = 399 1336
AFLR3 GG : Nodes, Elements = 405 1354
AFLR3 GG : Nodes, Elements = 405 1386
AFLR3 GG : Nodes, Elements = 405 1370
AFLR3 GG : Nodes, Elements = 410 1385
AFLR3 GG : Nodes, Elements = 410 1399
AFLR3 GG : Nodes, Elements = 410 1398
AFLR3 : CPU Time = 0.126 seconds
AFLR3 QI : QUALITY IMPROVEMENT
AFLR3 QI : Nodes, Elements = 410 1398
AFLR3 QI : Nodes, Elements = 410 1405
AFLR3 QI : Nodes, Elements = 410 1398
AFLR3 QI : Nodes, Elements = 410 1393
AFLR3 QI : Nodes, Elements = 410 1394
AFLR3 QI : Nodes, Elements = 410 1392
AFLR3 : CPU Time = 0.049 seconds
AFLR3 : DONE
UG3 : DIHEDRAL ANGLE CHECK
UG3 : No. Tet Elems = 1392
UG3 : Min, Max Ang = 13.52 154.5
UG3 : Average Angle = 70.2
UG3 : No. Angle>160.0 = 0
UG3 : No. Angle>179.9 = 0
UG3 : VOL CHECK
UG3 : Total-Volume = 0.0184
UG3 : No. Tet Elems = 1392
UG3 : Min Vol = 1.15e-06
UG3 : Average Vol = 1.32e-05
UG3 : Total-Tet-Vol = 0.0184
UG3 : No. Vol<TOL = 0
UG3 : Q VOL-LENGTH-RATIO CHECK
2/3 2
UG3 : Q = c * Vol / sum( L )
UG3 : 0 <= Q <= 1
UG3 : No. Tet Elems = 1392
UG3 : Min, Max Q = 0.419 0.998
UG3 : Average Q = 0.863
UG3 : No. Q< 0.1 = 0
UG3 : No. Q< 0.01 = 0
UG3 : DIHEDRAL ANGLE CHECK
UG3 : No. Tet Elems = 1392
UG3 : Min, Max Ang = 13.52 154.5
UG3 : Average Angle = 70.2
UG3 : No. Angle>160.0 = 0
UG3 : No. Angle>179.9 = 0
UG3 : VOL CHECK
UG3 : Total-Volume = 0.0184
UG3 : No. Tet Elems = 1392
UG3 : Min Vol = 1.15e-06
UG3 : Average Vol = 1.32e-05
UG3 : Total-Tet-Vol = 0.0184
UG3 : No. Vol<TOL = 0
UG3 : Q VOL-LENGTH-RATIO CHECK
2/3 2
UG3 : Q = c * Vol / sum( L )
UG3 : 0 <= Q <= 1
UG3 : Note that L includes scaling for BL-aspect=ratio
UG3 : No. Tet Elems = 1392
UG3 : Min, Max Q = 0.495 1
UG3 : Average Q = 0.88
UG3 : No. Q< 0.1 = 0
UG3 : No. Q< 0.01 = 0
UG3 : CPU Time = 0.000 seconds
EGADS : ---------------------------------------
EGADS : Engineering Geometry Aircraft Design System
EGADS : Version 1.23
EGADS : OpenCASCADE Version 7.4.1
EGADS : ---------------------------------------
OVERALL : CPU Time = 0.411 seconds
EGADS : CREATE EGADS TESS FROM AFLR3 DATA
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 1
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 2
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 3
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 4
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 5
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 6
EGADS : CREATING TESSELLATION FOR BODY 0 FACE 1
EGADS : CREATING TESSELLATION FOR BODY 0 FACE 2
EGADS : CREATING TESSELLATION FOR BODY 0 FACE 3
EGADS : CREATING TESSELLATION FOR BODY 0 FACE 4
EGADS : EGADS TESS CREATED
EGADS : CHECK TESS GLOBAL FACE NODE MAP
EGADS : CHECKING NODE MAP FOR BODY 0 FACE 1
EGADS : CHECKING NODE MAP FOR BODY 0 FACE 2
EGADS : CHECKING NODE MAP FOR BODY 0 FACE 3
EGADS : CHECKING NODE MAP FOR BODY 0 FACE 4
Getting volume mesh for body 5 (of 5)
EGADS : ---------------------------------------
EGADS : Engineering Geometry Aircraft Design System
EGADS : Version 1.23
EGADS : OpenCASCADE Version 7.4.1
EGADS : ---------------------------------------
OVERALL : CPU Time = 0.407 seconds
DGEOM : Add surface definitions to composite definition 0
DGEOM : Glue composite surface definition 0
DGEOM : Nodes,Faces,BEdges= 298 592 132
UG PARAM : SETTING INPUT PARAMETERS FROM ARGUMENT VECTOR
UG PARAM : mrecm = 3
UG PARAM : mrecqm = 3
UG PARAM : SETTING INPUT PARAMETERS FROM ARGUMENT VECTOR
UG PARAM : mrecm = 3
UG PARAM : mrecqm = 3
UG PARAM : mpfrmt = 0
AFLR3 IC : INPUT SURFACE GRID CHECK
AFLR3 IC : Nodes, Elements = 298 0
UG3 : Boundary Conditions
UG3 : B-Face ID Boundary Condition
UG3 : 1 Solid
UG3 : 2 Solid
UG3 : 3 Solid
UG3 : 4 Solid
AFLR3 : CPU Time = 0.016 seconds
AFLR3 IG : INITIAL VOLUME GRID GENERATION
AFLR3 IG : Nodes, Elements = 298 0
AFLR3 IG : Nodes, Elements = 8 10
AFLR3 IG : Nodes, Elements = 62 334
AFLR3 IG : Nodes, Elements = 124 726
AFLR3 IG : Nodes, Elements = 186 1151
AFLR3 IG : Nodes, Elements = 248 1547
AFLR3 IG : Nodes, Elements = 305 1919
AFLR3 IG : Nodes, Elements = 298 1076
AFLR3 IG : Nodes, Elements = 298 931
AFLR3 IG : Nodes, Elements = 298 822
AFLR3 : CPU Time = 0.113 seconds
AFLR3 GG : ISOTROPIC VOLUME GRID GENERATION
AFLR3 GG : Nodes, Elements = 298 822
AFLR3 GG : Nodes, Elements = 349 975
AFLR3 GG : Nodes, Elements = 349 1115
AFLR3 GG : Nodes, Elements = 349 1047
AFLR3 GG : Nodes, Elements = 383 1149
AFLR3 GG : Nodes, Elements = 383 1311
AFLR3 GG : Nodes, Elements = 383 1254
AFLR3 GG : Nodes, Elements = 399 1302
AFLR3 GG : Nodes, Elements = 399 1374
AFLR3 GG : Nodes, Elements = 399 1350
AFLR3 GG : Nodes, Elements = 403 1362
AFLR3 GG : Nodes, Elements = 403 1377
AFLR3 GG : Nodes, Elements = 403 1376
AFLR3 : CPU Time = 0.123 seconds
AFLR3 QI : QUALITY IMPROVEMENT
AFLR3 QI : Nodes, Elements = 403 1376
AFLR3 QI : Nodes, Elements = 402 1370
AFLR3 QI : Nodes, Elements = 402 1376
AFLR3 QI : Nodes, Elements = 402 1371
AFLR3 QI : Nodes, Elements = 402 1365
AFLR3 QI : Nodes, Elements = 402 1368
AFLR3 QI : Nodes, Elements = 402 1364
AFLR3 QI : Nodes, Elements = 402 1363
AFLR3 : CPU Time = 0.060 seconds
AFLR3 : DONE
UG3 : DIHEDRAL ANGLE CHECK
UG3 : No. Tet Elems = 1363
UG3 : Min, Max Ang = 21.47 133.3
UG3 : Average Angle = 70.1
UG3 : No. Angle>160.0 = 0
UG3 : No. Angle>179.9 = 0
UG3 : VOL CHECK
UG3 : Total-Volume = 0.0184
UG3 : No. Tet Elems = 1363
UG3 : Min Vol = 1.71e-06
UG3 : Average Vol = 1.35e-05
UG3 : Total-Tet-Vol = 0.0184
UG3 : No. Vol<TOL = 0
UG3 : Q VOL-LENGTH-RATIO CHECK
2/3 2
UG3 : Q = c * Vol / sum( L )
UG3 : 0 <= Q <= 1
UG3 : No. Tet Elems = 1363
UG3 : Min, Max Q = 0.599 0.999
UG3 : Average Q = 0.859
UG3 : No. Q< 0.1 = 0
UG3 : No. Q< 0.01 = 0
UG3 : DIHEDRAL ANGLE CHECK
UG3 : No. Tet Elems = 1363
UG3 : Min, Max Ang = 21.47 133.3
UG3 : Average Angle = 70.1
UG3 : No. Angle>160.0 = 0
UG3 : No. Angle>179.9 = 0
UG3 : VOL CHECK
UG3 : Total-Volume = 0.0184
UG3 : No. Tet Elems = 1363
UG3 : Min Vol = 1.71e-06
UG3 : Average Vol = 1.35e-05
UG3 : Total-Tet-Vol = 0.0184
UG3 : No. Vol<TOL = 0
UG3 : Q VOL-LENGTH-RATIO CHECK
2/3 2
UG3 : Q = c * Vol / sum( L )
UG3 : 0 <= Q <= 1
UG3 : Note that L includes scaling for BL-aspect=ratio
UG3 : No. Tet Elems = 1363
UG3 : Min, Max Q = 0.649 1
UG3 : Average Q = 0.878
UG3 : No. Q< 0.1 = 0
UG3 : No. Q< 0.01 = 0
UG3 : CPU Time = 0.000 seconds
EGADS : ---------------------------------------
EGADS : Engineering Geometry Aircraft Design System
EGADS : Version 1.23
EGADS : OpenCASCADE Version 7.4.1
EGADS : ---------------------------------------
OVERALL : CPU Time = 0.411 seconds
EGADS : CREATE EGADS TESS FROM AFLR3 DATA
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 1
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 2
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 3
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 4
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 5
EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 6
EGADS : CREATING TESSELLATION FOR BODY 0 FACE 1
EGADS : CREATING TESSELLATION FOR BODY 0 FACE 2
EGADS : CREATING TESSELLATION FOR BODY 0 FACE 3
EGADS : CREATING TESSELLATION FOR BODY 0 FACE 4
EGADS : EGADS TESS CREATED
EGADS : CHECK TESS GLOBAL FACE NODE MAP
EGADS : CHECKING NODE MAP FOR BODY 0 FACE 1
EGADS : CHECKING NODE MAP FOR BODY 0 FACE 2
EGADS : CHECKING NODE MAP FOR BODY 0 FACE 3
EGADS : CHECKING NODE MAP FOR BODY 0 FACE 4
Volume mesh:
Number of nodes = 3789
Number of elements = 18890
Number of triangles = 5566
Number of quadrilatarals = 0
Number of tetrahedrals = 13324
Number of pyramids = 0
Number of prisms = 0
Number of hexahedrals = 0
No project name ("Proj_Name") provided - A volume mesh will not be written out
Writing exodus file ....
Block: 'tableTop', blk_id 1, num_entries 7791
Block: 'leg0', blk_id 2, num_entries 1409
Block: 'leg1', blk_id 3, num_entries 1369
Block: 'leg2', blk_id 4, num_entries 1392
Block: 'leg3', blk_id 5, num_entries 1363
Sideset: 'leg0Side', set_id 1, num_entries 598
Sideset: 'leg1Side', set_id 2, num_entries 592
Sideset: 'leg2Side', set_id 3, num_entries 598
Sideset: 'leg3Side', set_id 4, num_entries 592
Sideset: 'tableTopSide', set_id 5, num_entries 3186
Nodeset: 'edge', set_id 1, num_entries 25
Nodeset: 'face1', set_id 2, num_entries 244
Nodeset: 'face2', set_id 3, num_entries 248
Nodeset: 'node', set_id 4, num_entries 1
Finished writing Exodus file
Projecting tessellation 1 (of 5) on to new body
Projecting tessellation 2 (of 5) on to new body
Projecting tessellation 3 (of 5) on to new body
Projecting tessellation 4 (of 5) on to new body
Projecting tessellation 5 (of 5) on to new body
==1785007==
==1785007== HEAP SUMMARY:
==1785007== in use at exit: 4,170,651 bytes in 24,683 blocks
==1785007== total heap usage: 1,761,513 allocs, 1,736,830 frees, 1,321,862,082 bytes allocated
==1785007==
==1785007== LEAK SUMMARY:
==1785007== definitely lost: 0 bytes in 0 blocks
==1785007== indirectly lost: 0 bytes in 0 blocks
==1785007== possibly lost: 0 bytes in 0 blocks
==1785007== still reachable: 0 bytes in 0 blocks
==1785007== suppressed: 4,170,651 bytes in 24,683 blocks
==1785007==
==1785007== For lists of detected and suppressed errors, rerun with: -s
==1785007== ERROR SUMMARY: 0 errors from 0 contexts (suppressed: 1870 from 1870)
49.38user 1.00system 0:50.38elapsed 100%CPU (0avgtext+0avgdata 364348maxresident)k
0inputs+12504outputs (0major+461735minor)pagefaults 0swaps
real 0m50.386s
user 0m49.391s
sys 0m1.034s
+ status=0
+ set +x
=================================================
CAPS verification (using pyCAPS) case plato_aflr_table_morph_PyTest.py passed (as expected)
=================================================
=================================================
+ echo 'plato_aflr_tetgen_cyli_box_PyTest.py test;'
+ tee -a /jenkins/workspace/ESP_ValgrindCaps/7.4/CAPS/STRUCTURE/LINUX64/ESP/LINUX64/examples/regressionTest/pyCAPSlog.txt
plato_aflr_tetgen_cyli_box_PyTest.py test;
+ time valgrind --tool=memcheck --error-exitcode=0 --leak-check=yes --show-leak-kinds=all --keep-debuginfo=yes --gen-suppressions=all --max-stackframe=4000000 --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.4/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-AFLR.supp --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.4/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-exodus.supp --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.4/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-IRIT.supp --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.4/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-MKL.supp --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.4/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-python.supp --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.4/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-Tblade3.supp --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.4/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-Ubuntu.supp --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.4/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-OCC7.4.supp python -u plato_aflr_tetgen_cyli_box_PyTest.py -outLevel=0
+ tee -a /jenkins/workspace/ESP_ValgrindCaps/7.4/CAPS/STRUCTURE/LINUX64/ESP/LINUX64/examples/regressionTest/pyCAPSlog.txt
==1786892== Memcheck, a memory error detector
==1786892== Copyright (C) 2002-2017, and GNU GPL'd, by Julian Seward et al.
==1786892== Using Valgrind-3.18.1 and LibVEX; rerun with -h for copyright info
==1786892== Command: python -u plato_aflr_tetgen_cyli_box_PyTest.py -outLevel=0
==1786892==
EGADS Warning: Loop 2 marked with -1
EGADS Warning: Loop 2 marked with -1
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 5
Name = box, index = 1
Name = cyl2, index = 2
Name = box;cyl2, index = 3
Name = cyl1, index = 4
Name = cyl1;box;cyl2, index = 5
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 0
AFLR2 : ---------------------------------------
AFLR2 : AFLR2 LIBRARY
AFLR2 : ADVANCING-FRONT/LOCAL-RECONNECTION
AFLR2 : TRIA/QUAD GRID GENERATOR
AFLR2 : Version Number 9.14.6
AFLR2 : Version Date 11/20/22 @ 09:21PM
AFLR2 : Compile OS Linux 3.10.0-957.27.2.el7.x86_64 x86_64
AFLR2 : Compile Date 11/21/22 @ 12:54PM
AFLR2 : Copyright 1994-2021, D.L. Marcum
AFLR2 : ---------------------------------------
AFLR4 : ---------------------------------------
AFLR4 : AFLR4 LIBRARY
AFLR4 : ADVANCING-FRONT/LOCAL-RECONNECTION
AFLR4 : TRIA/QUAD SURFACE GRID GENERATOR
AFLR4 : Version Number 11.3.15
AFLR4 : Version Date 12/07/22 @ 10:53AM
AFLR4 : Compile OS Linux 3.10.0-957.27.2.el7.x86_64 x86_64
AFLR4 : Compile Date 12/11/22 @ 11:55AM
AFLR4 : Copyright 1994-2021, D.L. Marcum
AFLR4 : ---------------------------------------
EGADS : ---------------------------------------
EGADS : Engineering Geometry Aircraft Design System
EGADS : Version 1.23
EGADS : OpenCASCADE Version 7.4.1
EGADS : ---------------------------------------
EGADS : EGADS CAD Geometry Setup
EGADS : Model has 1 Active Bodies
EGADS : Body 0 is a SheetBody
EGADS : Body 0 has 1 Shells
EGADS : Body 0 has 14 Faces
EGADS : Body 0 has 24 Edges
EGADS : Body 0 has 18 Loops
EGADS : Body 0 has 16 Nodes
EGADS : Check Grid BCs
EGADS : Grid BCs are OK
EGADS : Face Neighbor-Faces Information
EGADS : QC = Face Quad Combination Flag
EGADS : IER = Face Isolated Edge Refinement Flag
EGADS : ER = Face Edge Refinement Factor
EGADS : Not applicable for Faces with a FarField Grid BC.
EGADS : SF = Face Scale Factor
EGADS : Not applicable for Faces with a FarField Grid BC.
EGADS : Face Body QC IER ER Scale Neighbor
EGADS : ID Active ID Flag Flag Weight Factor Faces
EGADS : 1 Yes 0 0 1 0 1 2 6 7 8
EGADS : 2 Yes 0 0 1 0 1 1 3 4 5 7 8 9
EGADS : 3 Yes 0 0 1 0 1 2 4 6 9 12
EGADS : 4 Yes 0 0 1 0 1 2 3 6 9 12
EGADS : 5 Yes 0 0 1 0 1 2 6 7 8
EGADS : 6 Yes 0 0 1 0 1 1 3 4 5 7 8 12
EGADS : 7 Yes 0 0 1 0 1 1 2 5 6
EGADS : 8 Yes 0 0 1 0 1 1 2 5 6
EGADS : 9 Yes 0 0 1 0 1 2 3 4 10 11 13
EGADS : 10 Yes 0 0 1 0 1 9 11 12 13 14
EGADS : 11 Yes 0 0 1 0 1 9 10 12 13 14
EGADS : 12 Yes 0 0 1 0 1 3 4 6 10 11 14
EGADS : 13 Yes 0 0 1 0 1 9 10 11
EGADS : 14 Yes 0 0 1 0 1 10 11 12
EGADS : Face Edges Information
EGADS : Face Edges
EGADS : 1 -1 4 3 -2
EGADS : 2 5 1 -6 -7 8 9
EGADS : 3 10 -12 -11 8
EGADS : 4 -10 9 11 -13
EGADS : 5 7 14 -15 -16
EGADS : 6 -17 15 18 -3 -12 -13
EGADS : 7 16 17 -4 -5
EGADS : 8 -14 6 2 -18
EGADS : 9 -8 -9 19 20
EGADS : 10 21 -23 -22 19
EGADS : 11 -21 20 22 -24
EGADS : 12 12 13 -23 -24
EGADS : 13 -19 -20
EGADS : 14 23 24
EGADS : Face Loops Information
EGADS : Face Loops
EGADS : 1 1
EGADS : 2 2 3
EGADS : 3 4
EGADS : 4 5
EGADS : 5 6
EGADS : 6 7 8
EGADS : 7 9
EGADS : 8 10
EGADS : 9 11 12
EGADS : 10 13
EGADS : 11 14
EGADS : 12 15 16
EGADS : 13 17
EGADS : 14 18
EGADS : Loop Edges Information
EGADS : Loop Active Sense Edges
EGADS : 1 Yes 1 -1 4 3 -2
EGADS : 2 Yes 1 5 1 -6 -7
EGADS : 3 Yes 1 8 9
EGADS : 4 Yes 1 10 -12 -11 8
EGADS : 5 Yes 1 -10 9 11 -13
EGADS : 6 Yes 1 7 14 -15 -16
EGADS : 7 Yes 1 -17 15 18 -3
EGADS : 8 Yes 1 -12 -13
EGADS : 9 Yes 1 16 17 -4 -5
EGADS : 10 Yes 1 -14 6 2 -18
EGADS : 11 Yes 1 -8 -9
EGADS : 12 Yes 1 19 20
EGADS : 13 Yes 1 21 -23 -22 19
EGADS : 14 Yes 1 -21 20 22 -24
EGADS : 15 Yes 1 12 13
EGADS : 16 Yes 1 -23 -24
EGADS : 17 Yes 1 -19 -20
EGADS : 18 Yes 1 23 24
EGADS : Edge Node, Scale Factor, and Neighbor-Faces Information
EGADS : ESF = Edge Scale Factor
EGADS : Not applicable for DEGENERATE Edges or Edges with a FarField
EGADS : Grid BC Neighbor Face.
EGADS : Neighbor
EGADS : Edge Body Active Node1 Node2 ESF Faces
EGADS : 1 0 Yes 2 1 1 1 2
EGADS : 2 0 Yes 1 3 1 1 8
EGADS : 3 0 Yes 4 3 1 1 6
EGADS : 4 0 Yes 2 4 1 1 7
EGADS : 5 0 Yes 5 2 1 2 7
EGADS : 6 0 Yes 6 1 1 2 8
EGADS : 7 0 Yes 5 6 1 2 5
EGADS : 8 0 Yes 7 8 1 2 3 9
EGADS : 9 0 Yes 8 7 1 2 4 9
EGADS : 10 0 Yes 8 9 1 3 4
EGADS : 11 0 Yes 7 10 1 3 4
EGADS : 12 0 Yes 10 9 1 3 6 12
EGADS : 13 0 Yes 9 10 1 4 6 12
EGADS : 14 0 Yes 6 11 1 5 8
EGADS : 15 0 Yes 12 11 1 5 6
EGADS : 16 0 Yes 5 12 1 5 7
EGADS : 17 0 Yes 12 4 1 6 7
EGADS : 18 0 Yes 11 3 1 6 8
EGADS : 19 0 Yes 13 14 1 9 10 13
EGADS : 20 0 Yes 14 13 1 9 11 13
EGADS : 21 0 Yes 14 15 1 10 11
EGADS : 22 0 Yes 13 16 1 10 11
EGADS : 23 0 Yes 16 15 1 10 12 14
EGADS : 24 0 Yes 15 16 1 11 12 14
EGADS : Node Information
EGADS : Node Active Coordinates
EGADS : 1 Yes 0.5 0 0.5
EGADS : 2 Yes 0.5 0 0
EGADS : 3 Yes 0.5 0.5 0.5
EGADS : 4 Yes 0.5 0.5 0
EGADS : 5 Yes 0 0 0
EGADS : 6 Yes 0 0 0.5
EGADS : 7 Yes 0 0 0.2
EGADS : 8 Yes 0 0 0
EGADS : 9 Yes 0 0.5 0
EGADS : 10 Yes 0 0.5 0.2
EGADS : 11 Yes 0 0.5 0.5
EGADS : 12 Yes 0 0.5 0
EGADS : 13 Yes 0 0 0.1
EGADS : 14 Yes 0 0 0
EGADS : 15 Yes 0 0.5 0
EGADS : 16 Yes 0 0.5 0.1
AFLR4 : Surface Mesh Spacing Setup
AFLR4 : Max Bounding Box Length = 1
AFLR4 : Min Bounding Box Length = 1
AFLR4 : Max Ref Bounding Box Length = 1
AFLR4 : Min Ref Bounding Box Length = 1
AFLR4 : Reference Length = 1
AFLR4 : BL Thickness = 0
AFLR4 : Abs Min Surf Spacing = 0.0025
AFLR4 : Min Surf Spacing = 0.005
AFLR4 : Max Surf Spacing = 0.1
AFLR4 : Global Scale Factor = 1
AFLR4 : Geometry Definition Information
AFLR4 : Definition Definition Composite Grid BC
AFLR4 : ID Type ID Type
AFLR4 : 0 glue-only composite - -
AFLR4 : 1 CAD geometry 0 STD
AFLR4 : 2 CAD geometry 0 STD
AFLR4 : 3 CAD geometry 0 TRANSP
AFLR4 : 4 CAD geometry 0 TRANSP
AFLR4 : 5 CAD geometry 0 STD
AFLR4 : 6 CAD geometry 0 STD
AFLR4 : 7 CAD geometry 0 STD
AFLR4 : 8 CAD geometry 0 STD
AFLR4 : 9 CAD geometry 0 STD
AFLR4 : 10 CAD geometry 0 TRANSP
AFLR4 : 11 CAD geometry 0 TRANSP
AFLR4 : 12 CAD geometry 0 STD
AFLR4 : 13 CAD geometry 0 STD
AFLR4 : 14 CAD geometry 0 STD
AFLR4 : Define CAD surface definition 1
AFLR4 : Define CAD surface definition 2
AFLR4 : Define CAD surface definition 3
AFLR4 : Define CAD surface definition 4
AFLR4 : Define CAD surface definition 5
AFLR4 : Define CAD surface definition 6
AFLR4 : Define CAD surface definition 7
AFLR4 : Define CAD surface definition 8
AFLR4 : Define CAD surface definition 9
AFLR4 : Define CAD surface definition 10
AFLR4 : Define CAD surface definition 11
AFLR4 : Define CAD surface definition 12
AFLR4 : Define CAD surface definition 13
AFLR4 : Define CAD surface definition 14
AFLR4 : Surface Grid Generation
AFLR4 : Generate optimal mesh on surface definition 1
AFLR2 : Nodes, Trias,Quads= 136 230 0
AFLR4 : Nodes, Trias,Quads= 132 222 0
AFLR4 : Generate optimal mesh on surface definition 2
AFLR2 : Nodes, Trias,Quads= 486 868 0
AFLR4 : Nodes, Trias,Quads= 477 850 0
AFLR4 : Generate optimal mesh on surface definition 3
AFLR2 : Nodes, Trias,Quads= 1904 3642 0
AFLR4 : Nodes, Trias,Quads= 1889 3612 0
AFLR4 : Generate optimal mesh on surface definition 4
AFLR2 : Nodes, Trias,Quads= 1904 3642 0
AFLR4 : Nodes, Trias,Quads= 1889 3612 0
AFLR4 : Generate optimal mesh on surface definition 5
AFLR2 : Nodes, Trias,Quads= 136 230 0
AFLR4 : Nodes, Trias,Quads= 132 222 0
AFLR4 : Generate optimal mesh on surface definition 6
AFLR2 : Nodes, Trias,Quads= 486 868 0
AFLR4 : Nodes, Trias,Quads= 476 848 0
AFLR4 : Generate optimal mesh on surface definition 7
AFLR2 : Nodes, Trias,Quads= 134 226 0
AFLR4 : Nodes, Trias,Quads= 132 222 0
AFLR4 : Generate optimal mesh on surface definition 8
AFLR2 : Nodes, Trias,Quads= 135 228 0
AFLR4 : Nodes, Trias,Quads= 131 220 0
AFLR4 : Generate optimal mesh on surface definition 9
AFLR2 : Nodes, Trias,Quads= 582 1036 0
AFLR4 : Nodes, Trias,Quads= 576 1024 0
AFLR4 : Generate optimal mesh on surface definition 10
AFLR2 : Nodes, Trias,Quads= 3745 7224 0
AFLR4 : Nodes, Trias,Quads= 3741 7216 0
AFLR4 : Generate optimal mesh on surface definition 11
AFLR2 : Nodes, Trias,Quads= 3745 7224 0
AFLR4 : Nodes, Trias,Quads= 3741 7216 0
AFLR4 : Generate optimal mesh on surface definition 12
AFLR2 : Nodes, Trias,Quads= 582 1036 0
AFLR4 : Nodes, Trias,Quads= 576 1024 0
AFLR4 : Generate optimal mesh on surface definition 13
AFLR2 : Nodes, Trias,Quads= 504 942 0
AFLR4 : Nodes, Trias,Quads= 402 738 0
AFLR4 : Generate optimal mesh on surface definition 14
AFLR2 : Nodes, Trias,Quads= 515 964 0
AFLR4 : Nodes, Trias,Quads= 413 760 0
DGEOM : Add surface definitions to composite definition 0
DGEOM : Glue composite surface definition 0
DGEOM : Nodes,Faces,BEdges= 13767 27786 1608
AFLR4 : Curvature BG Surface Grid Generation
AFLR4 : Nodes, Trias = 13767 27786
AFLR4 : Surface Grid Generation
AFLR4 : Generate optimal mesh on surface definition 1
AFLR2 : Nodes, Trias,Quads= 137 232 0
AFLR4 : Nodes, Trias,Quads= 132 222 0
AFLR4 : Generate optimal mesh on surface definition 2
AFLR2 : Nodes, Trias,Quads= 507 910 0
AFLR4 : Nodes, Trias,Quads= 711 1318 0
AFLR4 : Generate optimal mesh on surface definition 3
AFLR2 : Nodes, Trias,Quads= 1882 3598 0
AFLR4 : Nodes, Trias,Quads= 1884 3602 0
AFLR4 : Generate optimal mesh on surface definition 4
AFLR2 : Nodes, Trias,Quads= 1876 3586 0
AFLR4 : Nodes, Trias,Quads= 1881 3596 0
AFLR4 : Generate optimal mesh on surface definition 5
AFLR2 : Nodes, Trias,Quads= 136 230 0
AFLR4 : Nodes, Trias,Quads= 132 222 0
AFLR4 : Generate optimal mesh on surface definition 6
AFLR2 : Nodes, Trias,Quads= 499 894 0
AFLR4 : Nodes, Trias,Quads= 710 1316 0
AFLR4 : Generate optimal mesh on surface definition 7
AFLR2 : Nodes, Trias,Quads= 136 230 0
AFLR4 : Nodes, Trias,Quads= 132 222 0
AFLR4 : Generate optimal mesh on surface definition 8
AFLR2 : Nodes, Trias,Quads= 137 232 0
AFLR4 : Nodes, Trias,Quads= 132 222 0
AFLR4 : Generate optimal mesh on surface definition 9
AFLR2 : Nodes, Trias,Quads= 576 1024 0
AFLR4 : Nodes, Trias,Quads= 576 1024 0
AFLR4 : Generate optimal mesh on surface definition 10
AFLR2 : Nodes, Trias,Quads= 3736 7206 0
AFLR4 : Nodes, Trias,Quads= 3727 7188 0
AFLR4 : Generate optimal mesh on surface definition 11
AFLR2 : Nodes, Trias,Quads= 3735 7204 0
AFLR4 : Nodes, Trias,Quads= 3730 7194 0
AFLR4 : Generate optimal mesh on surface definition 12
AFLR2 : Nodes, Trias,Quads= 576 1024 0
AFLR4 : Nodes, Trias,Quads= 576 1024 0
AFLR4 : Generate optimal mesh on surface definition 13
AFLR2 : Nodes, Trias,Quads= 504 942 0
AFLR4 : Nodes, Trias,Quads= 406 746 0
AFLR4 : Generate optimal mesh on surface definition 14
AFLR2 : Nodes, Trias,Quads= 498 930 0
AFLR4 : Nodes, Trias,Quads= 416 766 0
DGEOM : Add surface definitions to composite definition 0
DGEOM : Glue composite surface definition 0
DGEOM : Nodes,Faces,BEdges= 14205 28662 1608
OVERALL : CPU Time = 9.044 seconds
Body 1 (of 1)
Number of nodes = 14205
Number of elements = 28662
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 28662
Number of quadrilateral elements = 0
----------------------------
Total number of nodes = 14205
Total number of elements = 28662
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 5
Name = box, index = 1
Name = cyl2, index = 2
Name = box;cyl2, index = 3
Name = cyl1, index = 4
Name = cyl1;box;cyl2, index = 5
Number of surface: nodes - 14205, elements - 28662
Getting volume mesh
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 4.73346
Creating surface mesh ...
Surface mesh seconds: 0.46871
Recovering boundaries...
Boundary recovery seconds: 1.15973
Removing exterior tetrahedra ...
Warning: The 3-th region point lies outside the convex hull.
Spreading region attributes.
Exterior tets removal seconds: 0.189961
Recovering Delaunayness...
Delaunay recovery seconds: 2.88303
Refining mesh...
Refinement seconds: 10.1629
Smoothing vertices...
Mesh smoothing seconds: 15.1219
Improving mesh...
Mesh improvement seconds: 0.746516
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.086975
Total running seconds: 35.5628
Statistics:
Input points: 14205
Input facets: 28662
Input segments: 42865
Input holes: 0
Input regions: 3
Mesh points: 22408
Mesh tetrahedra: 122233
Mesh faces: 248007
Mesh faces on exterior boundary: 7082
Mesh faces on input facets: 28662
Mesh edges on input segments: 42865
Steiner points inside domain: 8203
Done meshing using TetGen!
Writing VTK file: volume.vtk....
Finished writing VTK file
Writing exodus file ....
Block: 'c', blk_id 3, num_entries 27550
Block: 'b', blk_id 2, num_entries 58313
Block: 'a', blk_id 1, num_entries 36370
Sideset: 'box', set_id 1, num_entries 7082
Sideset: 'cyl1', set_id 2, num_entries 15894
Sideset: 'cyl2', set_id 3, num_entries 10758
Finished writing Exodus file
==1786892==
==1786892== HEAP SUMMARY:
==1786892== in use at exit: 4,170,954 bytes in 24,688 blocks
==1786892== total heap usage: 2,219,156 allocs, 2,194,468 frees, 46,276,149,756 bytes allocated
==1786892==
==1786892== LEAK SUMMARY:
==1786892== definitely lost: 0 bytes in 0 blocks
==1786892== indirectly lost: 0 bytes in 0 blocks
==1786892== possibly lost: 0 bytes in 0 blocks
==1786892== still reachable: 0 bytes in 0 blocks
==1786892== suppressed: 4,170,954 bytes in 24,688 blocks
==1786892==
==1786892== For lists of detected and suppressed errors, rerun with: -s
==1786892== ERROR SUMMARY: 0 errors from 0 contexts (suppressed: 1871 from 1871)
171.56user 5.89system 2:57.44elapsed 100%CPU (0avgtext+0avgdata 531736maxresident)k
0inputs+32248outputs (0major+2861083minor)pagefaults 0swaps
real 2m57.452s
user 2m51.575s
sys 0m5.899s
+ status=0
+ set +x
=================================================
CAPS verification (using pyCAPS) case plato_aflr_tetgen_cyli_box_PyTest.py passed (as expected)
=================================================
=================================================
+ echo 'plato_tetgen_table_PyTest.py test;'
+ tee -a /jenkins/workspace/ESP_ValgrindCaps/7.4/CAPS/STRUCTURE/LINUX64/ESP/LINUX64/examples/regressionTest/pyCAPSlog.txt
plato_tetgen_table_PyTest.py test;
+ time valgrind --tool=memcheck --error-exitcode=0 --leak-check=yes --show-leak-kinds=all --keep-debuginfo=yes --gen-suppressions=all --max-stackframe=4000000 --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.4/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-AFLR.supp --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.4/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-exodus.supp --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.4/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-IRIT.supp --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.4/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-MKL.supp --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.4/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-python.supp --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.4/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-Tblade3.supp --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.4/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-Ubuntu.supp --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.4/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-OCC7.4.supp python -u plato_tetgen_table_PyTest.py -outLevel=0
+ tee -a /jenkins/workspace/ESP_ValgrindCaps/7.4/CAPS/STRUCTURE/LINUX64/ESP/LINUX64/examples/regressionTest/pyCAPSlog.txt
==1795511== Memcheck, a memory error detector
==1795511== Copyright (C) 2002-2017, and GNU GPL'd, by Julian Seward et al.
==1795511== Using Valgrind-3.18.1 and LibVEX; rerun with -h for copyright info
==1795511== Command: python -u plato_tetgen_table_PyTest.py -outLevel=0
==1795511==
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 5
Name = tableTopSide, index = 1
Name = leg0Side, index = 2
Name = leg1Side, index = 3
Name = leg2Side, index = 4
Name = leg3Side, index = 5
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 0
Getting surface mesh for body 1 (of 5)
Getting surface mesh for body 2 (of 5)
Getting surface mesh for body 3 (of 5)
Getting surface mesh for body 4 (of 5)
Getting surface mesh for body 5 (of 5)
Body 1 (of 5)
Number of nodes = 642
Number of elements = 1280
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 1280
Number of quadrilateral elements = 0
Body 2 (of 5)
Number of nodes = 1070
Number of elements = 2136
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 2136
Number of quadrilateral elements = 0
Body 3 (of 5)
Number of nodes = 1070
Number of elements = 2136
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 2136
Number of quadrilateral elements = 0
Body 4 (of 5)
Number of nodes = 1070
Number of elements = 2136
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 2136
Number of quadrilateral elements = 0
Body 5 (of 5)
Number of nodes = 1070
Number of elements = 2136
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 2136
Number of quadrilateral elements = 0
----------------------------
Total number of nodes = 4922
Total number of elements = 9824
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 5
Name = tableTopSide, index = 1
Name = leg0Side, index = 2
Name = leg1Side, index = 3
Name = leg2Side, index = 4
Name = leg3Side, index = 5
Body 1 number of surface: nodes - 642, elements - 1280
Body 2 number of surface: nodes - 1070, elements - 2136
Body 3 number of surface: nodes - 1070, elements - 2136
Body 4 number of surface: nodes - 1070, elements - 2136
Body 5 number of surface: nodes - 1070, elements - 2136
Getting volume mesh
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.79688
Creating surface mesh ...
Surface mesh seconds: 0.020692
Recovering boundaries...
Boundary recovery seconds: 0.145877
Removing exterior tetrahedra ...
Spreading region attributes.
Exterior tets removal seconds: 0.017297
Recovering Delaunayness...
Delaunay recovery seconds: 0.216439
Refining mesh...
Refinement seconds: 0.043208
Improving mesh...
Mesh improvement seconds: 0.015592
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.005999
Total running seconds: 1.26565
Statistics:
Input points: 642
Input facets: 1280
Input segments: 1920
Input holes: 0
Input regions: 1
Mesh points: 642
Mesh tetrahedra: 1722
Mesh faces: 4084
Mesh faces on exterior boundary: 1280
Mesh faces on input facets: 1280
Mesh edges on input segments: 1920
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 3.26288
Creating surface mesh ...
Surface mesh seconds: 0.058059
Recovering boundaries...
Boundary recovery seconds: 0.227158
Removing exterior tetrahedra ...
Warning: The 1-th region point lies outside the convex hull.
Spreading region attributes.
Exterior tets removal seconds: 0.02729
Recovering Delaunayness...
Delaunay recovery seconds: 1.12649
Refining mesh...
Refinement seconds: 2.49498
Smoothing vertices...
Mesh smoothing seconds: 2.52035
Improving mesh...
Mesh improvement seconds: 0.061164
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.007908
Total running seconds: 9.78995
Statistics:
Input points: 1070
Input facets: 2136
Input segments: 3204
Input holes: 0
Input regions: 2
Mesh points: 1315
Mesh tetrahedra: 4460
Mesh faces: 9988
Mesh faces on exterior boundary: 2136
Mesh faces on input facets: 2136
Mesh edges on input segments: 3204
Steiner points inside domain: 245
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 3.34252
Creating surface mesh ...
Surface mesh seconds: 0.047456
Recovering boundaries...
Boundary recovery seconds: 0.195866
Removing exterior tetrahedra ...
Warning: The 1-th region point lies outside the convex hull.
Warning: The 2-th region point lies outside the convex hull.
Spreading region attributes.
Exterior tets removal seconds: 0.027265
Recovering Delaunayness...
Delaunay recovery seconds: 1.03343
Refining mesh...
Refinement seconds: 2.90652
Smoothing vertices...
Mesh smoothing seconds: 2.6176
Improving mesh...
Mesh improvement seconds: 0.058755
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.008436
Total running seconds: 10.2392
Statistics:
Input points: 1070
Input facets: 2136
Input segments: 3204
Input holes: 0
Input regions: 3
Mesh points: 1314
Mesh tetrahedra: 4436
Mesh faces: 9940
Mesh faces on exterior boundary: 2136
Mesh faces on input facets: 2136
Mesh edges on input segments: 3204
Steiner points inside domain: 244
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 3.72278
Creating surface mesh ...
Surface mesh seconds: 0.032683
Recovering boundaries...
Boundary recovery seconds: 0.203954
Removing exterior tetrahedra ...
Warning: The 1-th region point lies outside the convex hull.
Warning: The 2-th region point lies outside the convex hull.
Warning: The 3-th region point lies outside the convex hull.
Spreading region attributes.
Exterior tets removal seconds: 0.024522
Recovering Delaunayness...
Delaunay recovery seconds: 1.10141
Refining mesh...
Refinement seconds: 2.42835
Smoothing vertices...
Mesh smoothing seconds: 2.35097
Improving mesh...
Mesh improvement seconds: 0.041201
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.00458
Total running seconds: 9.91262
Statistics:
Input points: 1070
Input facets: 2136
Input segments: 3204
Input holes: 0
Input regions: 4
Mesh points: 1317
Mesh tetrahedra: 4459
Mesh faces: 9986
Mesh faces on exterior boundary: 2136
Mesh faces on input facets: 2136
Mesh edges on input segments: 3204
Steiner points inside domain: 247
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 3.69086
Creating surface mesh ...
Surface mesh seconds: 0.054939
Recovering boundaries...
Boundary recovery seconds: 0.164221
Removing exterior tetrahedra ...
Warning: The 1-th region point lies outside the convex hull.
Warning: The 2-th region point lies outside the convex hull.
Warning: The 3-th region point lies outside the convex hull.
Warning: The 4-th region point lies outside the convex hull.
Spreading region attributes.
Exterior tets removal seconds: 0.034455
Recovering Delaunayness...
Delaunay recovery seconds: 1.13148
Refining mesh...
Refinement seconds: 2.38896
Smoothing vertices...
Mesh smoothing seconds: 2.20086
Improving mesh...
Mesh improvement seconds: 0.052204
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.008146
Total running seconds: 9.7275
Statistics:
Input points: 1070
Input facets: 2136
Input segments: 3204
Input holes: 0
Input regions: 5
Mesh points: 1312
Mesh tetrahedra: 4414
Mesh faces: 9896
Mesh faces on exterior boundary: 2136
Mesh faces on input facets: 2136
Mesh edges on input segments: 3204
Steiner points inside domain: 242
Done meshing using TetGen!
Writing VTK file: volume.vtk....
Finished writing VTK file
Writing exodus file ....
Block: 'tableTop', blk_id 1, num_entries 1722
Block: 'leg0', blk_id 2, num_entries 4460
Block: 'leg1', blk_id 3, num_entries 4436
Block: 'leg2', blk_id 4, num_entries 4459
Block: 'leg3', blk_id 5, num_entries 4414
Sideset: 'leg0Side', set_id 1, num_entries 2136
Sideset: 'leg1Side', set_id 2, num_entries 2136
Sideset: 'leg2Side', set_id 3, num_entries 2136
Sideset: 'leg3Side', set_id 4, num_entries 2136
Sideset: 'tableTopSide', set_id 5, num_entries 1280
Nodeset: 'edge', set_id 1, num_entries 17
Nodeset: 'face1', set_id 2, num_entries 99
Nodeset: 'face2', set_id 3, num_entries 99
Nodeset: 'node', set_id 4, num_entries 1
Finished writing Exodus file
==1795511==
==1795511== HEAP SUMMARY:
==1795511== in use at exit: 4,095,909 bytes in 24,496 blocks
==1795511== total heap usage: 632,886 allocs, 608,390 frees, 1,105,163,158 bytes allocated
==1795511==
==1795511== LEAK SUMMARY:
==1795511== definitely lost: 0 bytes in 0 blocks
==1795511== indirectly lost: 0 bytes in 0 blocks
==1795511== possibly lost: 0 bytes in 0 blocks
==1795511== still reachable: 0 bytes in 0 blocks
==1795511== suppressed: 4,095,909 bytes in 24,496 blocks
==1795511==
==1795511== For lists of detected and suppressed errors, rerun with: -s
==1795511== ERROR SUMMARY: 0 errors from 0 contexts (suppressed: 1878 from 1878)
95.91user 1.67system 1:37.60elapsed 99%CPU (0avgtext+0avgdata 366404maxresident)k
32inputs+11824outputs (0major+402199minor)pagefaults 0swaps
real 1m37.611s
user 1m35.919s
sys 0m1.676s
+ status=0
+ set +x
=================================================
CAPS verification (using pyCAPS) case plato_tetgen_table_PyTest.py passed (as expected)
=================================================
=================================================
+ echo 'plato_tetgen_cyli_box_PyTest.py test;'
+ tee -a /jenkins/workspace/ESP_ValgrindCaps/7.4/CAPS/STRUCTURE/LINUX64/ESP/LINUX64/examples/regressionTest/pyCAPSlog.txt
plato_tetgen_cyli_box_PyTest.py test;
+ time valgrind --tool=memcheck --error-exitcode=0 --leak-check=yes --show-leak-kinds=all --keep-debuginfo=yes --gen-suppressions=all --max-stackframe=4000000 --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.4/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-AFLR.supp --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.4/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-exodus.supp --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.4/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-IRIT.supp --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.4/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-MKL.supp --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.4/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-python.supp --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.4/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-Tblade3.supp --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.4/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-Ubuntu.supp --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.4/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-OCC7.4.supp python -u plato_tetgen_cyli_box_PyTest.py -outLevel=0
+ tee -a /jenkins/workspace/ESP_ValgrindCaps/7.4/CAPS/STRUCTURE/LINUX64/ESP/LINUX64/examples/regressionTest/pyCAPSlog.txt
==1803070== Memcheck, a memory error detector
==1803070== Copyright (C) 2002-2017, and GNU GPL'd, by Julian Seward et al.
==1803070== Using Valgrind-3.18.1 and LibVEX; rerun with -h for copyright info
==1803070== Command: python -u plato_tetgen_cyli_box_PyTest.py -outLevel=0
==1803070==
EGADS Warning: Loop 2 marked with -1
EGADS Warning: Loop 2 marked with -1
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 5
Name = box, index = 1
Name = cyl2, index = 2
Name = box;cyl2, index = 3
Name = cyl1, index = 4
Name = cyl1;box;cyl2, index = 5
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 0
Getting surface mesh for body 1 (of 1)
Body 1 (of 1)
Number of nodes = 3603
Number of elements = 7330
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 7330
Number of quadrilateral elements = 0
----------------------------
Total number of nodes = 3603
Total number of elements = 7330
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 5
Name = box, index = 1
Name = cyl2, index = 2
Name = box;cyl2, index = 3
Name = cyl1, index = 4
Name = cyl1;box;cyl2, index = 5
Number of surface: nodes - 3603, elements - 7330
Getting volume mesh
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 8.01205
Creating surface mesh ...
Surface mesh seconds: 0.163433
Recovering boundaries...
Boundary recovery seconds: 0.964896
Removing exterior tetrahedra ...
Warning: The 3-th region point lies outside the convex hull.
Spreading region attributes.
Exterior tets removal seconds: 0.074308
Recovering Delaunayness...
Delaunay recovery seconds: 7.75651
Refining mesh...
Refinement seconds: 11.6819
Smoothing vertices...
Mesh smoothing seconds: 14.1473
Improving mesh...
Mesh improvement seconds: 0.319774
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.024276
Total running seconds: 43.152
Statistics:
Input points: 3603
Input facets: 7330
Input segments: 10931
Input holes: 0
Input regions: 3
Mesh points: 5634
Mesh tetrahedra: 29520
Mesh faces: 60657
Mesh faces on exterior boundary: 3234
Mesh faces on input facets: 7330
Mesh edges on input segments: 10931
Steiner points inside domain: 2031
Done meshing using TetGen!
Writing VTK file: volume.vtk....
Finished writing VTK file
Writing exodus file ....
Block: 'c', blk_id 3, num_entries 12838
Block: 'b', blk_id 2, num_entries 11116
Block: 'a', blk_id 1, num_entries 5566
Sideset: 'box', set_id 1, num_entries 3234
Sideset: 'cyl1', set_id 2, num_entries 2120
Sideset: 'cyl2', set_id 3, num_entries 2314
Finished writing Exodus file
==1803070==
==1803070== HEAP SUMMARY:
==1803070== in use at exit: 4,096,537 bytes in 24,501 blocks
==1803070== total heap usage: 1,003,437 allocs, 978,936 frees, 3,066,461,062 bytes allocated
==1803070==
==1803070== LEAK SUMMARY:
==1803070== definitely lost: 0 bytes in 0 blocks
==1803070== indirectly lost: 0 bytes in 0 blocks
==1803070== possibly lost: 0 bytes in 0 blocks
==1803070== still reachable: 0 bytes in 0 blocks
==1803070== suppressed: 4,096,537 bytes in 24,501 blocks
==1803070==
==1803070== For lists of detected and suppressed errors, rerun with: -s
==1803070== ERROR SUMMARY: 0 errors from 0 contexts (suppressed: 1879 from 1879)
109.31user 1.72system 1:51.63elapsed 99%CPU (0avgtext+0avgdata 440032maxresident)k
0inputs+11624outputs (0major+674312minor)pagefaults 0swaps
real 1m51.638s
user 1m49.320s
sys 0m1.729s
+ status=0
+ set +x
=================================================
CAPS verification (using pyCAPS) case plato_tetgen_cyli_box_PyTest.py passed (as expected)
=================================================
=================================================
+ echo 'plato_aflr_tetgen_table_PyTest.py test;'
+ tee -a /jenkins/workspace/ESP_ValgrindCaps/7.4/CAPS/STRUCTURE/LINUX64/ESP/LINUX64/examples/regressionTest/pyCAPSlog.txt
plato_aflr_tetgen_table_PyTest.py test;
+ time valgrind --tool=memcheck --error-exitcode=0 --leak-check=yes --show-leak-kinds=all --keep-debuginfo=yes --gen-suppressions=all --max-stackframe=4000000 --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.4/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-AFLR.supp --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.4/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-exodus.supp --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.4/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-IRIT.supp --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.4/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-MKL.supp --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.4/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-python.supp --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.4/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-Tblade3.supp --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.4/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-Ubuntu.supp --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.4/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-OCC7.4.supp python -u plato_aflr_tetgen_table_PyTest.py -outLevel=0
+ tee -a /jenkins/workspace/ESP_ValgrindCaps/7.4/CAPS/STRUCTURE/LINUX64/ESP/LINUX64/examples/regressionTest/pyCAPSlog.txt
==1813312== Memcheck, a memory error detector
==1813312== Copyright (C) 2002-2017, and GNU GPL'd, by Julian Seward et al.
==1813312== Using Valgrind-3.18.1 and LibVEX; rerun with -h for copyright info
==1813312== Command: python -u plato_aflr_tetgen_table_PyTest.py -outLevel=0
==1813312==
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 5
Name = tableTopSide, index = 1
Name = leg0Side, index = 2
Name = leg1Side, index = 3
Name = leg2Side, index = 4
Name = leg3Side, index = 5
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 0
AFLR2 : ---------------------------------------
AFLR2 : AFLR2 LIBRARY
AFLR2 : ADVANCING-FRONT/LOCAL-RECONNECTION
AFLR2 : TRIA/QUAD GRID GENERATOR
AFLR2 : Version Number 9.14.6
AFLR2 : Version Date 11/20/22 @ 09:21PM
AFLR2 : Compile OS Linux 3.10.0-957.27.2.el7.x86_64 x86_64
AFLR2 : Compile Date 11/21/22 @ 12:54PM
AFLR2 : Copyright 1994-2021, D.L. Marcum
AFLR2 : ---------------------------------------
AFLR4 : ---------------------------------------
AFLR4 : AFLR4 LIBRARY
AFLR4 : ADVANCING-FRONT/LOCAL-RECONNECTION
AFLR4 : TRIA/QUAD SURFACE GRID GENERATOR
AFLR4 : Version Number 11.3.15
AFLR4 : Version Date 12/07/22 @ 10:53AM
AFLR4 : Compile OS Linux 3.10.0-957.27.2.el7.x86_64 x86_64
AFLR4 : Compile Date 12/11/22 @ 11:55AM
AFLR4 : Copyright 1994-2021, D.L. Marcum
AFLR4 : ---------------------------------------
EGADS : ---------------------------------------
EGADS : Engineering Geometry Aircraft Design System
EGADS : Version 1.23
EGADS : OpenCASCADE Version 7.4.1
EGADS : ---------------------------------------
EGADS : EGADS CAD Geometry Setup
EGADS : Model has 5 Active Bodies
EGADS : Body 0 is a SolidBody
EGADS : Body 0 has 1 Shells
EGADS : Body 0 has 6 Faces
EGADS : Body 0 has 12 Edges
EGADS : Body 0 has 6 Loops
EGADS : Body 0 has 8 Nodes
EGADS : Body 1 is a SolidBody
EGADS : Body 1 has 1 Shells
EGADS : Body 1 has 4 Faces
EGADS : Body 1 has 6 Edges
EGADS : Body 1 has 4 Loops
EGADS : Body 1 has 4 Nodes
EGADS : Body 2 is a SolidBody
EGADS : Body 2 has 1 Shells
EGADS : Body 2 has 4 Faces
EGADS : Body 2 has 6 Edges
EGADS : Body 2 has 4 Loops
EGADS : Body 2 has 4 Nodes
EGADS : Body 3 is a SolidBody
EGADS : Body 3 has 1 Shells
EGADS : Body 3 has 4 Faces
EGADS : Body 3 has 6 Edges
EGADS : Body 3 has 4 Loops
EGADS : Body 3 has 4 Nodes
EGADS : Body 4 is a SolidBody
EGADS : Body 4 has 1 Shells
EGADS : Body 4 has 4 Faces
EGADS : Body 4 has 6 Edges
EGADS : Body 4 has 4 Loops
EGADS : Body 4 has 4 Nodes
EGADS : Check Grid BCs
EGADS : Grid BCs are OK
EGADS : Face Neighbor-Faces Information
EGADS : QC = Face Quad Combination Flag
EGADS : IER = Face Isolated Edge Refinement Flag
EGADS : ER = Face Edge Refinement Factor
EGADS : Not applicable for Faces with a FarField Grid BC.
EGADS : SF = Face Scale Factor
EGADS : Not applicable for Faces with a FarField Grid BC.
EGADS : Face Body QC IER ER Scale Neighbor
EGADS : ID Active ID Flag Flag Weight Factor Faces
EGADS : 1 Yes 0 0 1 0 1 3 4 5 6
EGADS : 2 Yes 0 0 1 0 1 3 4 5 6
EGADS : 3 Yes 0 0 1 0 1 1 2 5 6
EGADS : 4 Yes 0 0 1 0 1 1 2 5 6
EGADS : 5 Yes 0 0 1 0 1 1 2 3 4
EGADS : 6 Yes 0 0 1 0 1 1 2 3 4
EGADS : 7 Yes 1 0 1 0 1 8 9 10
EGADS : 8 Yes 1 0 1 0 1 7 9 10
EGADS : 9 Yes 1 0 1 0 1 7 8
EGADS : 10 Yes 1 0 1 0 1 7 8
EGADS : 11 Yes 2 0 1 0 1 12 13 14
EGADS : 12 Yes 2 0 1 0 1 11 13 14
EGADS : 13 Yes 2 0 1 0 1 11 12
EGADS : 14 Yes 2 0 1 0 1 11 12
EGADS : 15 Yes 3 0 1 0 1 16 17 18
EGADS : 16 Yes 3 0 1 0 1 15 17 18
EGADS : 17 Yes 3 0 1 0 1 15 16
EGADS : 18 Yes 3 0 1 0 1 15 16
EGADS : 19 Yes 4 0 1 0 1 20 21 22
EGADS : 20 Yes 4 0 1 0 1 19 21 22
EGADS : 21 Yes 4 0 1 0 1 19 20
EGADS : 22 Yes 4 0 1 0 1 19 20
EGADS : Face Edges Information
EGADS : Face Edges
EGADS : 1 1 2 -3 -4
EGADS : 2 -5 8 7 -6
EGADS : 3 9 5 -10 -1
EGADS : 4 -11 3 12 -7
EGADS : 5 4 11 -8 -9
EGADS : 6 -2 10 6 -12
EGADS : 7 -13 -14 15 16
EGADS : 8 17 14 -18 -16
EGADS : 9 13 18
EGADS : 10 -15 -17
EGADS : 11 -19 -20 21 22
EGADS : 12 23 20 -24 -22
EGADS : 13 19 24
EGADS : 14 -21 -23
EGADS : 15 -25 -26 27 28
EGADS : 16 29 26 -30 -28
EGADS : 17 25 30
EGADS : 18 -27 -29
EGADS : 19 -31 -32 33 34
EGADS : 20 35 32 -36 -34
EGADS : 21 31 36
EGADS : 22 -33 -35
EGADS : Face Loops Information
EGADS : Face Loops
EGADS : 1 1
EGADS : 2 2
EGADS : 3 3
EGADS : 4 4
EGADS : 5 5
EGADS : 6 6
EGADS : 7 7
EGADS : 8 8
EGADS : 9 9
EGADS : 10 10
EGADS : 11 11
EGADS : 12 12
EGADS : 13 13
EGADS : 14 14
EGADS : 15 15
EGADS : 16 16
EGADS : 17 17
EGADS : 18 18
EGADS : 19 19
EGADS : 20 20
EGADS : 21 21
EGADS : 22 22
EGADS : Loop Edges Information
EGADS : Loop Active Sense Edges
EGADS : 1 Yes 1 1 2 -3 -4
EGADS : 2 Yes 1 -5 8 7 -6
EGADS : 3 Yes 1 9 5 -10 -1
EGADS : 4 Yes 1 -11 3 12 -7
EGADS : 5 Yes 1 4 11 -8 -9
EGADS : 6 Yes 1 -2 10 6 -12
EGADS : 7 Yes 1 -13 -14 15 16
EGADS : 8 Yes 1 17 14 -18 -16
EGADS : 9 Yes 1 13 18
EGADS : 10 Yes 1 -15 -17
EGADS : 11 Yes 1 -19 -20 21 22
EGADS : 12 Yes 1 23 20 -24 -22
EGADS : 13 Yes 1 19 24
EGADS : 14 Yes 1 -21 -23
EGADS : 15 Yes 1 -25 -26 27 28
EGADS : 16 Yes 1 29 26 -30 -28
EGADS : 17 Yes 1 25 30
EGADS : 18 Yes 1 -27 -29
EGADS : 19 Yes 1 -31 -32 33 34
EGADS : 20 Yes 1 35 32 -36 -34
EGADS : 21 Yes 1 31 36
EGADS : 22 Yes 1 -33 -35
EGADS : Edge Node, Scale Factor, and Neighbor-Faces Information
EGADS : ESF = Edge Scale Factor
EGADS : Not applicable for DEGENERATE Edges or Edges with a FarField
EGADS : Grid BC Neighbor Face.
EGADS : Neighbor
EGADS : Edge Body Active Node1 Node2 ESF Faces
EGADS : 1 0 Yes 2 1 1 1 3
EGADS : 2 0 Yes 1 3 1 1 6
EGADS : 3 0 Yes 4 3 1 1 4
EGADS : 4 0 Yes 2 4 1 1 5
EGADS : 5 0 Yes 6 5 1 2 3
EGADS : 6 0 Yes 5 7 1 2 6
EGADS : 7 0 Yes 8 7 1 2 4
EGADS : 8 0 Yes 6 8 1 2 5
EGADS : 9 0 Yes 2 6 1 3 5
EGADS : 10 0 Yes 1 5 1 3 6
EGADS : 11 0 Yes 4 8 1 4 5
EGADS : 12 0 Yes 3 7 1 4 6
EGADS : 13 1 Yes 10 9 1 7 9
EGADS : 14 1 Yes 11 10 1 7 8
EGADS : 15 1 Yes 11 12 1 7 10
EGADS : 16 1 Yes 12 9 1 7 8
EGADS : 17 1 Yes 12 11 1 8 10
EGADS : 18 1 Yes 9 10 1 8 9
EGADS : 19 2 Yes 14 13 1 11 13
EGADS : 20 2 Yes 15 14 1 11 12
EGADS : 21 2 Yes 15 16 1 11 14
EGADS : 22 2 Yes 16 13 1 11 12
EGADS : 23 2 Yes 16 15 1 12 14
EGADS : 24 2 Yes 13 14 1 12 13
EGADS : 25 3 Yes 18 17 1 15 17
EGADS : 26 3 Yes 19 18 1 15 16
EGADS : 27 3 Yes 19 20 1 15 18
EGADS : 28 3 Yes 20 17 1 15 16
EGADS : 29 3 Yes 20 19 1 16 18
EGADS : 30 3 Yes 17 18 1 16 17
EGADS : 31 4 Yes 22 21 1 19 21
EGADS : 32 4 Yes 23 22 1 19 20
EGADS : 33 4 Yes 23 24 1 19 22
EGADS : 34 4 Yes 24 21 1 19 20
EGADS : 35 4 Yes 24 23 1 20 22
EGADS : 36 4 Yes 21 22 1 20 21
EGADS : Node Information
EGADS : Node Active Coordinates
EGADS : 1 Yes 0 0 0.5
EGADS : 2 Yes 0 0 0
EGADS : 3 Yes 0 0.1 0.5
EGADS : 4 Yes 0 0.1 0
EGADS : 5 Yes 0.5 0 0.5
EGADS : 6 Yes 0.5 0 0
EGADS : 7 Yes 0.5 0.1 0.5
EGADS : 8 Yes 0.5 0.1 0
EGADS : 9 Yes 0 0 0
EGADS : 10 Yes 0 0 0
EGADS : 11 Yes 0 0 0
EGADS : 12 Yes 0 0 0
EGADS : 13 Yes 0 0 0.26
EGADS : 14 Yes 0 0 0.46
EGADS : 15 Yes 0 0 0.46
EGADS : 16 Yes 0 0 0.26
EGADS : 17 Yes 0.36 0 0.26
EGADS : 18 Yes 0.36 0 0.46
EGADS : 19 Yes 0.36 0 0.46
EGADS : 20 Yes 0.36 0 0.26
EGADS : 21 Yes 0.36 0 0
EGADS : 22 Yes 0.36 0 0
EGADS : 23 Yes 0.36 0 0
EGADS : 24 Yes 0.36 0 0
AFLR4 : Surface Mesh Spacing Setup
AFLR4 : Max Bounding Box Length = 1
AFLR4 : Min Bounding Box Length = 0.7
AFLR4 : Max Ref Bounding Box Length = 1
AFLR4 : Min Ref Bounding Box Length = 0.7
AFLR4 : Reference Length = 1
AFLR4 : BL Thickness = 0
AFLR4 : Abs Min Surf Spacing = 0.0025
AFLR4 : Min Surf Spacing = 0.005
AFLR4 : Max Surf Spacing = 0.1
AFLR4 : Global Scale Factor = 1
AFLR4 : Geometry Definition Information
AFLR4 : Definition Definition Composite Grid BC
AFLR4 : ID Type ID Type
AFLR4 : 0 glue-only composite - -
AFLR4 : 1 CAD geometry 0 STD w/BL
AFLR4 : 2 CAD geometry 0 STD w/BL
AFLR4 : 3 CAD geometry 0 STD w/BL
AFLR4 : 4 CAD geometry 0 STD w/BL
AFLR4 : 5 CAD geometry 0 STD w/BL
AFLR4 : 6 CAD geometry 0 STD w/BL
AFLR4 : 7 CAD geometry 0 STD w/BL
AFLR4 : 8 CAD geometry 0 STD w/BL
AFLR4 : 9 CAD geometry 0 STD w/BL
AFLR4 : 10 CAD geometry 0 STD w/BL
AFLR4 : 11 CAD geometry 0 STD w/BL
AFLR4 : 12 CAD geometry 0 STD w/BL
AFLR4 : 13 CAD geometry 0 STD w/BL
AFLR4 : 14 CAD geometry 0 STD w/BL
AFLR4 : 15 CAD geometry 0 STD w/BL
AFLR4 : 16 CAD geometry 0 STD w/BL
AFLR4 : 17 CAD geometry 0 STD w/BL
AFLR4 : 18 CAD geometry 0 STD w/BL
AFLR4 : 19 CAD geometry 0 STD w/BL
AFLR4 : 20 CAD geometry 0 STD w/BL
AFLR4 : 21 CAD geometry 0 STD w/BL
AFLR4 : 22 CAD geometry 0 STD w/BL
AFLR4 : Case has 5 Proximity Checking Components
AFLR4 : Component 1 includes Definitions 1 2 3 4 5 6
AFLR4 : Component 2 includes Definitions 7 8 9 10
AFLR4 : Component 3 includes Definitions 11 12 13 14
AFLR4 : Component 4 includes Definitions 15 16 17 18
AFLR4 : Component 5 includes Definitions 19 20 21 22
AFLR4 : Define CAD surface definition 1
AFLR4 : Define CAD surface definition 2
AFLR4 : Define CAD surface definition 3
AFLR4 : Define CAD surface definition 4
AFLR4 : Define CAD surface definition 5
AFLR4 : Define CAD surface definition 6
AFLR4 : Define CAD surface definition 7
AFLR4 : Define CAD surface definition 8
AFLR4 : Define CAD surface definition 9
AFLR4 : Define CAD surface definition 10
AFLR4 : Define CAD surface definition 11
AFLR4 : Define CAD surface definition 12
AFLR4 : Define CAD surface definition 13
AFLR4 : Define CAD surface definition 14
AFLR4 : Define CAD surface definition 15
AFLR4 : Define CAD surface definition 16
AFLR4 : Define CAD surface definition 17
AFLR4 : Define CAD surface definition 18
AFLR4 : Define CAD surface definition 19
AFLR4 : Define CAD surface definition 20
AFLR4 : Define CAD surface definition 21
AFLR4 : Define CAD surface definition 22
AFLR4 : Surface Grid Generation
AFLR4 : Generate optimal mesh on surface definition 1
AFLR2 : Nodes, Trias,Quads= 49 64 0
AFLR4 : Nodes, Trias,Quads= 34 34 0
AFLR4 : Generate optimal mesh on surface definition 2
AFLR2 : Nodes, Trias,Quads= 49 64 0
AFLR4 : Nodes, Trias,Quads= 34 34 0
AFLR4 : Generate optimal mesh on surface definition 3
AFLR2 : Nodes, Trias,Quads= 229 400 0
AFLR4 : Nodes, Trias,Quads= 212 366 0
AFLR4 : Generate optimal mesh on surface definition 4
AFLR2 : Nodes, Trias,Quads= 230 402 0
AFLR4 : Nodes, Trias,Quads= 212 366 0
AFLR4 : Generate optimal mesh on surface definition 5
AFLR2 : Nodes, Trias,Quads= 49 64 0
AFLR4 : Nodes, Trias,Quads= 34 34 0
AFLR4 : Generate optimal mesh on surface definition 6
AFLR2 : Nodes, Trias,Quads= 49 64 0
AFLR4 : Nodes, Trias,Quads= 34 34 0
AFLR4 : Generate optimal mesh on surface definition 7
AFLR2 : Nodes, Trias,Quads= 2270 4354 0
AFLR4 : Nodes, Trias,Quads= 2258 4330 0
AFLR4 : Generate optimal mesh on surface definition 8
AFLR2 : Nodes, Trias,Quads= 2270 4354 0
AFLR4 : Nodes, Trias,Quads= 2259 4332 0
AFLR4 : Generate optimal mesh on surface definition 9
AFLR2 : Nodes, Trias,Quads= 515 964 0
AFLR4 : Nodes, Trias,Quads= 413 760 0
AFLR4 : Generate optimal mesh on surface definition 10
AFLR2 : Nodes, Trias,Quads= 504 942 0
AFLR4 : Nodes, Trias,Quads= 402 738 0
AFLR4 : Generate optimal mesh on surface definition 11
AFLR2 : Nodes, Trias,Quads= 2270 4354 0
AFLR4 : Nodes, Trias,Quads= 2258 4330 0
AFLR4 : Generate optimal mesh on surface definition 12
AFLR2 : Nodes, Trias,Quads= 2270 4354 0
AFLR4 : Nodes, Trias,Quads= 2259 4332 0
AFLR4 : Generate optimal mesh on surface definition 13
AFLR2 : Nodes, Trias,Quads= 515 964 0
AFLR4 : Nodes, Trias,Quads= 413 760 0
AFLR4 : Generate optimal mesh on surface definition 14
AFLR2 : Nodes, Trias,Quads= 504 942 0
AFLR4 : Nodes, Trias,Quads= 402 738 0
AFLR4 : Generate optimal mesh on surface definition 15
AFLR2 : Nodes, Trias,Quads= 2270 4354 0
AFLR4 : Nodes, Trias,Quads= 2258 4330 0
AFLR4 : Generate optimal mesh on surface definition 16
AFLR2 : Nodes, Trias,Quads= 2270 4354 0
AFLR4 : Nodes, Trias,Quads= 2259 4332 0
AFLR4 : Generate optimal mesh on surface definition 17
AFLR2 : Nodes, Trias,Quads= 515 964 0
AFLR4 : Nodes, Trias,Quads= 413 760 0
AFLR4 : Generate optimal mesh on surface definition 18
AFLR2 : Nodes, Trias,Quads= 504 942 0
AFLR4 : Nodes, Trias,Quads= 402 738 0
AFLR4 : Generate optimal mesh on surface definition 19
AFLR2 : Nodes, Trias,Quads= 2270 4354 0
AFLR4 : Nodes, Trias,Quads= 2258 4330 0
AFLR4 : Generate optimal mesh on surface definition 20
AFLR2 : Nodes, Trias,Quads= 2270 4354 0
AFLR4 : Nodes, Trias,Quads= 2259 4332 0
AFLR4 : Generate optimal mesh on surface definition 21
AFLR2 : Nodes, Trias,Quads= 515 964 0
AFLR4 : Nodes, Trias,Quads= 413 760 0
AFLR4 : Generate optimal mesh on surface definition 22
AFLR2 : Nodes, Trias,Quads= 504 942 0
AFLR4 : Nodes, Trias,Quads= 402 738 0
DGEOM : Add surface definitions to composite definition 0
DGEOM : Glue composite surface definition 0
DGEOM : Nodes,Faces,BEdges= 20764 41508 2224
AFLR4 : Curvature BG Surface Grid Generation
AFLR4 : Nodes, Trias = 20764 41508
AFLR4 : Surface Grid Generation
AFLR4 : Generate optimal mesh on surface definition 1
AFLR2 : Nodes, Trias,Quads= 46 60 0
AFLR4 : Nodes, Trias,Quads= 30 28 0
AFLR4 : Generate optimal mesh on surface definition 2
AFLR2 : Nodes, Trias,Quads= 46 60 0
AFLR4 : Nodes, Trias,Quads= 30 28 0
AFLR4 : Generate optimal mesh on surface definition 3
AFLR2 : Nodes, Trias,Quads= 201 348 0
AFLR4 : Nodes, Trias,Quads= 193 332 0
AFLR4 : Generate optimal mesh on surface definition 4
AFLR2 : Nodes, Trias,Quads= 204 354 0
AFLR4 : Nodes, Trias,Quads= 193 332 0
AFLR4 : Generate optimal mesh on surface definition 5
AFLR2 : Nodes, Trias,Quads= 46 60 0
AFLR4 : Nodes, Trias,Quads= 30 28 0
AFLR4 : Generate optimal mesh on surface definition 6
AFLR2 : Nodes, Trias,Quads= 46 60 0
AFLR4 : Nodes, Trias,Quads= 30 28 0
AFLR4 : Generate optimal mesh on surface definition 7
AFLR2 : Nodes, Trias,Quads= 2245 4304 0
AFLR4 : Nodes, Trias,Quads= 2244 4302 0
AFLR4 : Generate optimal mesh on surface definition 8
AFLR2 : Nodes, Trias,Quads= 2248 4310 0
AFLR4 : Nodes, Trias,Quads= 2248 4310 0
AFLR4 : Generate optimal mesh on surface definition 9
AFLR2 : Nodes, Trias,Quads= 496 926 0
AFLR4 : Nodes, Trias,Quads= 416 766 0
AFLR4 : Generate optimal mesh on surface definition 10
AFLR2 : Nodes, Trias,Quads= 502 938 0
AFLR4 : Nodes, Trias,Quads= 408 750 0
AFLR4 : Generate optimal mesh on surface definition 11
AFLR2 : Nodes, Trias,Quads= 2245 4304 0
AFLR4 : Nodes, Trias,Quads= 2243 4300 0
AFLR4 : Generate optimal mesh on surface definition 12
AFLR2 : Nodes, Trias,Quads= 2248 4310 0
AFLR4 : Nodes, Trias,Quads= 2249 4312 0
AFLR4 : Generate optimal mesh on surface definition 13
AFLR2 : Nodes, Trias,Quads= 496 926 0
AFLR4 : Nodes, Trias,Quads= 416 766 0
AFLR4 : Generate optimal mesh on surface definition 14
AFLR2 : Nodes, Trias,Quads= 502 938 0
AFLR4 : Nodes, Trias,Quads= 408 750 0
AFLR4 : Generate optimal mesh on surface definition 15
AFLR2 : Nodes, Trias,Quads= 2245 4304 0
AFLR4 : Nodes, Trias,Quads= 2244 4302 0
AFLR4 : Generate optimal mesh on surface definition 16
AFLR2 : Nodes, Trias,Quads= 2248 4310 0
AFLR4 : Nodes, Trias,Quads= 2249 4312 0
AFLR4 : Generate optimal mesh on surface definition 17
AFLR2 : Nodes, Trias,Quads= 496 926 0
AFLR4 : Nodes, Trias,Quads= 416 766 0
AFLR4 : Generate optimal mesh on surface definition 18
AFLR2 : Nodes, Trias,Quads= 502 938 0
AFLR4 : Nodes, Trias,Quads= 408 750 0
AFLR4 : Generate optimal mesh on surface definition 19
AFLR2 : Nodes, Trias,Quads= 2245 4304 0
AFLR4 : Nodes, Trias,Quads= 2244 4302 0
AFLR4 : Generate optimal mesh on surface definition 20
AFLR2 : Nodes, Trias,Quads= 2248 4310 0
AFLR4 : Nodes, Trias,Quads= 2246 4306 0
AFLR4 : Generate optimal mesh on surface definition 21
AFLR2 : Nodes, Trias,Quads= 496 926 0
AFLR4 : Nodes, Trias,Quads= 416 766 0
AFLR4 : Generate optimal mesh on surface definition 22
AFLR2 : Nodes, Trias,Quads= 502 938 0
AFLR4 : Nodes, Trias,Quads= 408 750 0
DGEOM : Add surface definitions to composite definition 0
DGEOM : Glue composite surface definition 0
DGEOM : Nodes,Faces,BEdges= 20653 41286 2208
AFLR4 : Proximity BG Surface Grid Generation
AFLR4 : Nodes, Trias = 21566 43112
AFLR4 : Nodes, Trias = 22450 44880
AFLR4 : Nodes, Trias = 22542 45064
AFLR4 : Surface Grid Generation
AFLR4 : Generate optimal mesh on surface definition 1
AFLR2 : Nodes, Trias,Quads= 311 517 0
AFLR4 : Nodes, Trias,Quads= 309 513 0
AFLR4 : Generate optimal mesh on surface definition 2
AFLR2 : Nodes, Trias,Quads= 313 521 0
AFLR4 : Nodes, Trias,Quads= 309 513 0
AFLR4 : Generate optimal mesh on surface definition 3
AFLR2 : Nodes, Trias,Quads= 3277 6339 0
AFLR4 : Nodes, Trias,Quads= 1431 2647 0
AFLR4 : Generate optimal mesh on surface definition 4
AFLR2 : Nodes, Trias,Quads= 1864 3566 0
AFLR4 : Nodes, Trias,Quads= 1736 3310 0
AFLR4 : Generate optimal mesh on surface definition 5
AFLR2 : Nodes, Trias,Quads= 315 525 0
AFLR4 : Nodes, Trias,Quads= 307 509 0
AFLR4 : Generate optimal mesh on surface definition 6
AFLR2 : Nodes, Trias,Quads= 318 530 0
AFLR4 : Nodes, Trias,Quads= 314 522 0
AFLR4 : Generate optimal mesh on surface definition 7
AFLR2 : Nodes, Trias,Quads= 2301 4412 0
AFLR4 : Nodes, Trias,Quads= 2272 4354 0
AFLR4 : Generate optimal mesh on surface definition 8
AFLR2 : Nodes, Trias,Quads= 2302 4414 0
AFLR4 : Nodes, Trias,Quads= 2275 4360 0
AFLR4 : Generate optimal mesh on surface definition 9
AFLR2 : Nodes, Trias,Quads= 548 1028 0
AFLR4 : Nodes, Trias,Quads= 423 778 0
AFLR4 : Generate optimal mesh on surface definition 10
AFLR2 : Nodes, Trias,Quads= 549 1030 0
AFLR4 : Nodes, Trias,Quads= 418 768 0
AFLR4 : Generate optimal mesh on surface definition 11
AFLR2 : Nodes, Trias,Quads= 2301 4412 0
AFLR4 : Nodes, Trias,Quads= 2272 4354 0
AFLR4 : Generate optimal mesh on surface definition 12
AFLR2 : Nodes, Trias,Quads= 2302 4414 0
AFLR4 : Nodes, Trias,Quads= 2276 4362 0
AFLR4 : Generate optimal mesh on surface definition 13
AFLR2 : Nodes, Trias,Quads= 548 1028 0
AFLR4 : Nodes, Trias,Quads= 423 778 0
AFLR4 : Generate optimal mesh on surface definition 14
AFLR2 : Nodes, Trias,Quads= 549 1030 0
AFLR4 : Nodes, Trias,Quads= 418 768 0
AFLR4 : Generate optimal mesh on surface definition 15
AFLR2 : Nodes, Trias,Quads= 2301 4412 0
AFLR4 : Nodes, Trias,Quads= 2272 4354 0
AFLR4 : Generate optimal mesh on surface definition 16
AFLR2 : Nodes, Trias,Quads= 2302 4414 0
AFLR4 : Nodes, Trias,Quads= 2275 4360 0
AFLR4 : Generate optimal mesh on surface definition 17
AFLR2 : Nodes, Trias,Quads= 548 1028 0
AFLR4 : Nodes, Trias,Quads= 423 778 0
AFLR4 : Generate optimal mesh on surface definition 18
AFLR2 : Nodes, Trias,Quads= 549 1030 0
AFLR4 : Nodes, Trias,Quads= 418 768 0
AFLR4 : Generate optimal mesh on surface definition 19
AFLR2 : Nodes, Trias,Quads= 2301 4412 0
AFLR4 : Nodes, Trias,Quads= 2271 4352 0
AFLR4 : Generate optimal mesh on surface definition 20
AFLR2 : Nodes, Trias,Quads= 2302 4414 0
AFLR4 : Nodes, Trias,Quads= 2274 4358 0
AFLR4 : Generate optimal mesh on surface definition 21
AFLR2 : Nodes, Trias,Quads= 548 1028 0
AFLR4 : Nodes, Trias,Quads= 423 778 0
AFLR4 : Generate optimal mesh on surface definition 22
AFLR2 : Nodes, Trias,Quads= 549 1030 0
AFLR4 : Nodes, Trias,Quads= 418 768 0
DGEOM : Add surface definitions to composite definition 0
DGEOM : Glue composite surface definition 0
DGEOM : Nodes,Faces,BEdges= 24536 49052 2818
OVERALL : CPU Time = 42.148 seconds
Body 1 (of 5)
Number of nodes = 4009
Number of elements = 8014
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 8014
Number of quadrilateral elements = 0
Body 2 (of 5)
Number of nodes = 5132
Number of elements = 10260
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 10260
Number of quadrilateral elements = 0
Body 3 (of 5)
Number of nodes = 5133
Number of elements = 10262
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 10262
Number of quadrilateral elements = 0
Body 4 (of 5)
Number of nodes = 5132
Number of elements = 10260
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 10260
Number of quadrilateral elements = 0
Body 5 (of 5)
Number of nodes = 5130
Number of elements = 10256
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 10256
Number of quadrilateral elements = 0
----------------------------
Total number of nodes = 24536
Total number of elements = 49052
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 5
Name = tableTopSide, index = 1
Name = leg0Side, index = 2
Name = leg1Side, index = 3
Name = leg2Side, index = 4
Name = leg3Side, index = 5
Body 1 number of surface: nodes - 4009, elements - 8014
Body 2 number of surface: nodes - 5132, elements - 10260
Body 3 number of surface: nodes - 5133, elements - 10262
Body 4 number of surface: nodes - 5132, elements - 10260
Body 5 number of surface: nodes - 5130, elements - 10256
Getting volume mesh
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 1.69165
Creating surface mesh ...
Surface mesh seconds: 0.192261
Recovering boundaries...
Boundary recovery seconds: 0.595455
Removing exterior tetrahedra ...
Spreading region attributes.
Exterior tets removal seconds: 0.072378
Recovering Delaunayness...
Delaunay recovery seconds: 0.239934
Refining mesh...
Refinement seconds: 1.51793
Smoothing vertices...
Mesh smoothing seconds: 2.40098
Improving mesh...
Mesh improvement seconds: 0.150987
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.037356
Total running seconds: 6.90364
Statistics:
Input points: 4009
Input facets: 8014
Input segments: 12021
Input holes: 0
Input regions: 1
Mesh points: 4773
Mesh tetrahedra: 15871
Mesh faces: 35749
Mesh faces on exterior boundary: 8014
Mesh faces on input facets: 8014
Mesh edges on input segments: 12021
Steiner points inside domain: 764
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 2.49677
Creating surface mesh ...
Surface mesh seconds: 0.282137
Recovering boundaries...
Boundary recovery seconds: 0.862806
Removing exterior tetrahedra ...
Warning: The 1-th region point lies outside the convex hull.
Spreading region attributes.
Exterior tets removal seconds: 0.355722
Recovering Delaunayness...
Delaunay recovery seconds: 0.697784
Refining mesh...
Refinement seconds: 4.07901
Smoothing vertices...
Mesh smoothing seconds: 3.76031
Improving mesh...
Mesh improvement seconds: 0.217426
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.054218
Total running seconds: 12.8132
Statistics:
Input points: 5132
Input facets: 10260
Input segments: 15390
Input holes: 0
Input regions: 2
Mesh points: 6601
Mesh tetrahedra: 23352
Mesh faces: 51834
Mesh faces on exterior boundary: 10260
Mesh faces on input facets: 10260
Mesh edges on input segments: 15390
Steiner points inside domain: 1469
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 2.47778
Creating surface mesh ...
Surface mesh seconds: 0.273034
Recovering boundaries...
Boundary recovery seconds: 0.86637
Removing exterior tetrahedra ...
Warning: The 1-th region point lies outside the convex hull.
Warning: The 2-th region point lies outside the convex hull.
Spreading region attributes.
Exterior tets removal seconds: 0.328728
Recovering Delaunayness...
Delaunay recovery seconds: 0.682631
Refining mesh...
Refinement seconds: 3.74995
Smoothing vertices...
Mesh smoothing seconds: 3.76823
Improving mesh...
Mesh improvement seconds: 0.180178
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.055652
Total running seconds: 12.3893
Statistics:
Input points: 5133
Input facets: 10262
Input segments: 15393
Input holes: 0
Input regions: 3
Mesh points: 6578
Mesh tetrahedra: 23237
Mesh faces: 51605
Mesh faces on exterior boundary: 10262
Mesh faces on input facets: 10262
Mesh edges on input segments: 15393
Steiner points inside domain: 1445
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 2.65145
Creating surface mesh ...
Surface mesh seconds: 0.292655
Recovering boundaries...
Boundary recovery seconds: 0.919989
Removing exterior tetrahedra ...
Warning: The 1-th region point lies outside the convex hull.
Warning: The 2-th region point lies outside the convex hull.
Warning: The 3-th region point lies outside the convex hull.
Spreading region attributes.
Exterior tets removal seconds: 0.348145
Recovering Delaunayness...
Delaunay recovery seconds: 0.751253
Refining mesh...
Refinement seconds: 4.31981
Smoothing vertices...
Mesh smoothing seconds: 4.60071
Improving mesh...
Mesh improvement seconds: 0.25301
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.053341
Total running seconds: 14.1973
Statistics:
Input points: 5132
Input facets: 10260
Input segments: 15390
Input holes: 0
Input regions: 4
Mesh points: 6591
Mesh tetrahedra: 23307
Mesh faces: 51744
Mesh faces on exterior boundary: 10260
Mesh faces on input facets: 10260
Mesh edges on input segments: 15390
Steiner points inside domain: 1459
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 2.53784
Creating surface mesh ...
Surface mesh seconds: 0.293806
Recovering boundaries...
Boundary recovery seconds: 0.93724
Removing exterior tetrahedra ...
Warning: The 1-th region point lies outside the convex hull.
Warning: The 2-th region point lies outside the convex hull.
Warning: The 3-th region point lies outside the convex hull.
Warning: The 4-th region point lies outside the convex hull.
Spreading region attributes.
Exterior tets removal seconds: 0.33997
Recovering Delaunayness...
Delaunay recovery seconds: 0.704788
Refining mesh...
Refinement seconds: 4.25516
Smoothing vertices...
Mesh smoothing seconds: 4.57385
Improving mesh...
Mesh improvement seconds: 0.237317
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.052437
Total running seconds: 13.9388
Statistics:
Input points: 5130
Input facets: 10256
Input segments: 15384
Input holes: 0
Input regions: 5
Mesh points: 6609
Mesh tetrahedra: 23392
Mesh faces: 51912
Mesh faces on exterior boundary: 10256
Mesh faces on input facets: 10256
Mesh edges on input segments: 15384
Steiner points inside domain: 1479
Done meshing using TetGen!
Writing VTK file: volume.vtk....
Finished writing VTK file
Writing exodus file ....
Block: 'tableTop', blk_id 1, num_entries 15871
Block: 'leg0', blk_id 2, num_entries 23352
Block: 'leg1', blk_id 3, num_entries 23237
Block: 'leg2', blk_id 4, num_entries 23307
Block: 'leg3', blk_id 5, num_entries 23392
Sideset: 'leg0Side', set_id 1, num_entries 10260
Sideset: 'leg1Side', set_id 2, num_entries 10262
Sideset: 'leg2Side', set_id 3, num_entries 10260
Sideset: 'leg3Side', set_id 4, num_entries 10256
Sideset: 'tableTopSide', set_id 5, num_entries 8014
Nodeset: 'edge', set_id 1, num_entries 41
Nodeset: 'face1', set_id 2, num_entries 610
Nodeset: 'face2', set_id 3, num_entries 617
Nodeset: 'node', set_id 4, num_entries 1
Finished writing Exodus file
==1813312==
==1813312== HEAP SUMMARY:
==1813312== in use at exit: 4,170,582 bytes in 24,683 blocks
==1813312== total heap usage: 1,805,647 allocs, 1,780,964 frees, 23,327,955,339 bytes allocated
==1813312==
==1813312== LEAK SUMMARY:
==1813312== definitely lost: 0 bytes in 0 blocks
==1813312== indirectly lost: 0 bytes in 0 blocks
==1813312== possibly lost: 0 bytes in 0 blocks
==1813312== still reachable: 0 bytes in 0 blocks
==1813312== suppressed: 4,170,582 bytes in 24,683 blocks
==1813312==
==1813312== For lists of detected and suppressed errors, rerun with: -s
==1813312== ERROR SUMMARY: 0 errors from 0 contexts (suppressed: 1869 from 1869)
241.30user 4.33system 4:05.86elapsed 99%CPU (0avgtext+0avgdata 399896maxresident)k
0inputs+37712outputs (0major+1302149minor)pagefaults 0swaps
real 4m5.870s
user 4m1.317s
sys 0m4.354s
+ status=0
+ set +x
=================================================
CAPS verification (using pyCAPS) case plato_aflr_tetgen_table_PyTest.py passed (as expected)
=================================================
*************************************************
*************************************************
=================================================
Did not run examples for:
Astros
Nastran
=================================================
All tests pass!
+ exit 0
[GNU C Compiler (gcc)] Parsing console log (workspace: '/jenkins/workspace/ESP_ValgrindCaps/7.4/CAPS/STRUCTURE/LINUX64')
[GNU C Compiler (gcc)] Successfully parsed console log
[GNU C Compiler (gcc)] -> found 0 issues (skipped 0 duplicates)
[GNU C Compiler (gcc)] Skipping post processing
[GNU C Compiler (gcc)] No filter has been set, publishing all 0 issues
[GNU C Compiler (gcc)] Repository miner is not configured, skipping repository mining
[Clang] Parsing console log (workspace: '/jenkins/workspace/ESP_ValgrindCaps/7.4/CAPS/STRUCTURE/LINUX64')
[Clang] -> found 0 issues (skipped 0 duplicates)
[Clang] Parsing console log (workspace: '/jenkins/workspace/ESP_ValgrindCaps/7.4/CAPS/STRUCTURE/LINUX64')
[Clang] -> found 0 issues (skipped 0 duplicates)
[Clang] Successfully parsed console log
[Clang] -> found 0 issues (skipped 0 duplicates)
[Clang] Parsing console log (workspace: '/jenkins/workspace/ESP_ValgrindCaps/7.4/CAPS/STRUCTURE/LINUX64')
[Clang] Skipping post processing
[Clang] No filter has been set, publishing all 0 issues
[Clang] Repository miner is not configured, skipping repository mining
[Static Analysis] Reference build recorder is not configured
[Static Analysis] Obtaining reference build from same job (7.4,CAPS/STRUCTURE,LINUX64,reynolds)
[Static Analysis] Using reference build 'ESP_ValgrindCaps/CASREV=7.4,ESPTEST=CAPS/STRUCTURE,ESP_ARCH=LINUX64,buildnode=reynolds #198' to compute new, fixed, and outstanding issues
[Static Analysis] Issues delta (vs. reference build): outstanding: 0, new: 0, fixed: 0
[Static Analysis] Evaluating quality gates
[Static Analysis] -> PASSED - Total (any severity): 0 - Quality Gate: 1
[Static Analysis] -> All quality gates have been passed
[Static Analysis] Health report is disabled - skipping
[Static Analysis] Created analysis result for 0 issues (found 0 new issues, fixed 0 issues)
[Static Analysis] Attaching ResultAction with ID 'analysis' to build 'ESP_ValgrindCaps/CASREV=7.4,ESPTEST=CAPS/STRUCTURE,ESP_ARCH=LINUX64,buildnode=reynolds #199'.
[Checks API] No suitable checks publisher found.
[Valgrind] Files to copy:
[Valgrind] Analysing valgrind results
[Valgrind] Ending the valgrind analysis.
[PostBuildScript] - [INFO] Executing post build scripts.
[PostBuildScript] - [INFO] build step #0 should only be executed on MATRIX
[WS-CLEANUP] Deleting project workspace...
[WS-CLEANUP] done
Finished: SUCCESS