The Jenkins Controller is preparing for shutdown. No new builds can be started.
Skipping 730 KB.. Full LogAFLR4 : Define CAD surface definition 15 AFLR4 : Define CAD surface definition 16 AFLR4 : Define CAD surface definition 17 AFLR4 : Define CAD surface definition 18 --------------------------------------------------------------- AFLR4 : Multi-Zone Mode AFLR4 : Zone (Body) 0 --------------------------------------------------------------- EGADS : --------------------------------------- EGADS : Engineering Geometry Aircraft Design System EGADS : Version 1.25 EGADS : OpenCASCADE Version 7.6.0 EGADS : --------------------------------------- EGADS : EGADS CAD Geometry Setup EGADS : Model has 1 Active Bodies EGADS : Body 0 is a SolidBody EGADS : Body 0 has 1 Shells EGADS : Body 0 has 8 Faces EGADS : Body 0 has 18 Edges EGADS : Body 0 has 10 Loops EGADS : Body 0 has 12 Nodes EGADS : Check Grid BCs EGADS : Grid BCs are OK EGADS : Face Neighbor-Faces Information EGADS : QC = Face Quad Combination Flag EGADS : IER = Face Isolated Edge Refinement Flag EGADS : ER = Face Edge Refinement Factor EGADS : Not applicable for Faces with a FarField Grid BC. EGADS : SF = Face Scale Factor EGADS : Not applicable for Faces with a FarField Grid BC. EGADS : Face Body QC IER ER Scale Neighbor EGADS : ID Active ID Flag Flag Weight Factor Faces EGADS : 1 Yes 0 0 1 0 1 2 3 4 5 EGADS : 2 Yes 0 0 1 0 1 1 3 5 6 7 8 EGADS : 3 Yes 0 0 1 0 1 1 2 4 6 EGADS : 4 Yes 0 0 1 0 1 1 3 5 6 7 8 EGADS : 5 Yes 0 0 1 0 1 1 2 4 6 EGADS : 6 Yes 0 0 1 0 1 2 3 4 5 EGADS : 7 Yes 0 0 1 0 1 2 4 8 EGADS : 8 Yes 0 0 1 0 1 2 4 7 EGADS : Face Edges Information EGADS : Face Edges EGADS : 1 1 2 -3 -4 EGADS : 2 5 6 -7 -1 8 9 EGADS : 3 -2 7 11 -10 EGADS : 4 -12 3 10 -13 -14 -15 EGADS : 5 4 12 -16 -5 EGADS : 6 -6 16 13 -11 EGADS : 7 -17 -8 18 14 EGADS : 8 17 15 -18 -9 EGADS : Face Loops Information EGADS : Face Loops EGADS : 1 1 EGADS : 2 2 3 EGADS : 3 4 EGADS : 4 5 6 EGADS : 5 7 EGADS : 6 8 EGADS : 7 9 EGADS : 8 10 EGADS : Loop Edges Information EGADS : Loop Active Sense Edges EGADS : 1 Yes 1 1 2 -3 -4 EGADS : 2 Yes 1 5 6 -7 -1 EGADS : 3 Yes 1 8 9 EGADS : 4 Yes 1 -2 7 11 -10 EGADS : 5 Yes 1 -12 3 10 -13 EGADS : 6 Yes 1 -14 -15 EGADS : 7 Yes 1 4 12 -16 -5 EGADS : 8 Yes 1 -6 16 13 -11 EGADS : 9 Yes 1 -17 -8 18 14 EGADS : 10 Yes 1 17 15 -18 -9 EGADS : Edge Node, Scale Factor, and Neighbor-Faces Information EGADS : ESF = Edge Scale Factor EGADS : Not applicable for DEGENERATE Edges or Edges with a FarField EGADS : Grid BC Neighbor Face. EGADS : Neighbor EGADS : Edge Body Active Node1 Node2 ESF Faces EGADS : 1 0 Yes 2 1 1 1 2 EGADS : 2 0 Yes 1 3 1 1 3 EGADS : 3 0 Yes 4 3 1 1 4 EGADS : 4 0 Yes 2 4 1 1 5 EGADS : 5 0 Yes 2 5 1 2 5 EGADS : 6 0 Yes 5 6 1 2 6 EGADS : 7 0 Yes 1 6 1 2 3 EGADS : 8 0 Yes 7 8 1 2 7 EGADS : 9 0 Yes 8 7 1 2 8 EGADS : 10 0 Yes 3 9 1 3 4 EGADS : 11 0 Yes 6 9 1 3 6 EGADS : 12 0 Yes 4 10 1 4 5 EGADS : 13 0 Yes 10 9 1 4 6 EGADS : 14 0 Yes 11 12 1 4 7 EGADS : 15 0 Yes 12 11 1 4 8 EGADS : 16 0 Yes 5 10 1 5 6 EGADS : 17 0 Yes 8 12 1 7 8 EGADS : 18 0 Yes 7 11 1 7 8 EGADS : Node Information EGADS : Node Active Coordinates EGADS : 1 Yes 0 0 0.5 EGADS : 2 Yes 0 0 0 EGADS : 3 Yes 0 0.5 0.5 EGADS : 4 Yes 0 0.5 0 EGADS : 5 Yes 0.5 0 0 EGADS : 6 Yes 0.5 0 0.5 EGADS : 7 Yes 0 0 0.2 EGADS : 8 Yes 0 0 0 EGADS : 9 Yes 0.5 0.5 0.5 EGADS : 10 Yes 0.5 0.5 0 EGADS : 11 Yes 0 0.5 0.2 EGADS : 12 Yes 0 0.5 0 EGADS : Face and Edge Match Information EGADS : No Face Matches Found AFLR4 : Surface Mesh Spacing Setup AFLR4 : Max Bounding Box Length = 1 AFLR4 : Min Bounding Box Length = 1 AFLR4 : Max Ref Bounding Box Length = 1 AFLR4 : Min Ref Bounding Box Length = 1 AFLR4 : Reference Length = 10 AFLR4 : BL Thickness = 0 AFLR4 : Abs Min Surf Spacing = 0.025 AFLR4 : Min Surf Spacing = 0.05 AFLR4 : Max Surf Spacing = 1 AFLR4 : Global Scale Factor = 1 AFLR4 : Geometry Definition Information AFLR4 : Definition Definition Composite Grid BC AFLR4 : ID Type ID Type AFLR4 : 0 glue-only composite - - AFLR4 : 1 CAD geometry 0 STD AFLR4 : 2 CAD geometry 0 STD AFLR4 : 3 CAD geometry 0 STD AFLR4 : 4 CAD geometry 0 STD AFLR4 : 5 CAD geometry 0 STD AFLR4 : 6 CAD geometry 0 STD AFLR4 : 7 CAD geometry 0 STD AFLR4 : 8 CAD geometry 0 STD AFLR4 : Define CAD surface definition 1 AFLR4 : Define CAD surface definition 2 AFLR4 : Define CAD surface definition 3 AFLR4 : Define CAD surface definition 4 AFLR4 : Define CAD surface definition 5 AFLR4 : Define CAD surface definition 6 AFLR4 : Define CAD surface definition 7 AFLR4 : Define CAD surface definition 8 AFLR4 : Surface Grid Generation AFLR4 : Generate optimal mesh on surface definition 1 AFLR2 : Nodes, Trias,Quads= 12 14 0 AFLR4 : Nodes, Trias,Quads= 8 6 0 AFLR4 : Generate optimal mesh on surface definition 2 AFLR2 : Nodes, Trias,Quads= 60 86 0 AFLR4 : Nodes, Trias,Quads= 48 62 0 AFLR4 : Generate optimal mesh on surface definition 3 AFLR2 : Nodes, Trias,Quads= 12 14 0 AFLR4 : Nodes, Trias,Quads= 8 6 0 AFLR4 : Generate optimal mesh on surface definition 4 AFLR2 : Nodes, Trias,Quads= 60 86 0 AFLR4 : Nodes, Trias,Quads= 48 62 0 AFLR4 : Generate optimal mesh on surface definition 5 AFLR2 : Nodes, Trias,Quads= 12 14 0 AFLR4 : Nodes, Trias,Quads= 8 6 0 AFLR4 : Generate optimal mesh on surface definition 6 AFLR2 : Nodes, Trias,Quads= 12 14 0 AFLR4 : Nodes, Trias,Quads= 8 6 0 AFLR4 : Generate optimal mesh on surface definition 7 AFLR2 : Nodes, Trias,Quads= 327 586 0 AFLR4 : Nodes, Trias,Quads= 325 582 0 AFLR4 : Generate optimal mesh on surface definition 8 AFLR2 : Nodes, Trias,Quads= 327 586 0 AFLR4 : Nodes, Trias,Quads= 326 584 0 DGEOM : Add surface definitions to composite definition 0 DGEOM : Glue composite surface definition 0 DGEOM : Nodes,Faces,BEdges= 657 1314 232 AFLR4 : Curvature BG Surface Grid Generation AFLR4 : Nodes, Faces = 657 1314 AFLR4 : Surface Grid Generation AFLR4 : Generate optimal mesh on surface definition 1 AFLR2 : Nodes, Trias,Quads= 12 14 0 AFLR4 : Nodes, Trias,Quads= 8 6 0 AFLR4 : Generate optimal mesh on surface definition 2 AFLR2 : Nodes, Trias,Quads= 60 86 0 AFLR4 : Nodes, Trias,Quads= 52 70 0 AFLR4 : Generate optimal mesh on surface definition 3 AFLR2 : Nodes, Trias,Quads= 12 14 0 AFLR4 : Nodes, Trias,Quads= 8 6 0 AFLR4 : Generate optimal mesh on surface definition 4 AFLR2 : Nodes, Trias,Quads= 60 86 0 AFLR4 : Nodes, Trias,Quads= 52 70 0 AFLR4 : Generate optimal mesh on surface definition 5 AFLR2 : Nodes, Trias,Quads= 12 14 0 AFLR4 : Nodes, Trias,Quads= 8 6 0 AFLR4 : Generate optimal mesh on surface definition 6 AFLR2 : Nodes, Trias,Quads= 12 14 0 AFLR4 : Nodes, Trias,Quads= 8 6 0 AFLR4 : Generate optimal mesh on surface definition 7 AFLR2 : Nodes, Trias,Quads= 327 586 0 AFLR4 : Nodes, Trias,Quads= 325 582 0 AFLR4 : Generate optimal mesh on surface definition 8 AFLR2 : Nodes, Trias,Quads= 327 586 0 AFLR4 : Nodes, Trias,Quads= 327 586 0 DGEOM : Add surface definitions to composite definition 0 DGEOM : Glue composite surface definition 0 DGEOM : Nodes,Faces,BEdges= 666 1332 232 OVERALL : CPU Time = 2.090 seconds --------------------------------------------------------------- AFLR4 : Multi-Zone Mode AFLR4 : Zone (Body) 1 --------------------------------------------------------------- EGADS : --------------------------------------- EGADS : Engineering Geometry Aircraft Design System EGADS : Version 1.25 EGADS : OpenCASCADE Version 7.6.0 EGADS : --------------------------------------- EGADS : EGADS CAD Geometry Setup EGADS : Model has 1 Active Bodies EGADS : Body 0 is a SolidBody EGADS : Body 0 has 1 Shells EGADS : Body 0 has 6 Faces EGADS : Body 0 has 12 Edges EGADS : Body 0 has 8 Loops EGADS : Body 0 has 8 Nodes EGADS : Check Grid BCs EGADS : Grid BCs are OK EGADS : Face Neighbor-Faces Information EGADS : QC = Face Quad Combination Flag EGADS : IER = Face Isolated Edge Refinement Flag EGADS : ER = Face Edge Refinement Factor EGADS : Not applicable for Faces with a FarField Grid BC. EGADS : SF = Face Scale Factor EGADS : Not applicable for Faces with a FarField Grid BC. EGADS : Face Body QC IER ER Scale Neighbor EGADS : ID Active ID Flag Flag Weight Factor Faces EGADS : 1 Yes 0 0 1 0 1 2 3 4 5 EGADS : 2 Yes 0 0 1 0 1 1 3 6 EGADS : 3 Yes 0 0 1 0 1 1 2 6 EGADS : 4 Yes 0 0 1 0 1 1 5 6 EGADS : 5 Yes 0 0 1 0 1 1 4 6 EGADS : 6 Yes 0 0 1 0 1 2 3 4 5 EGADS : Face Edges Information EGADS : Face Edges EGADS : 1 -1 -2 3 4 EGADS : 2 -5 1 7 -6 EGADS : 3 5 -8 -7 2 EGADS : 4 -9 -3 10 11 EGADS : 5 9 12 -10 -4 EGADS : 6 6 8 -11 -12 EGADS : Face Loops Information EGADS : Face Loops EGADS : 1 1 2 EGADS : 2 3 EGADS : 3 4 EGADS : 4 5 EGADS : 5 6 EGADS : 6 7 8 EGADS : Loop Edges Information EGADS : Loop Active Sense Edges EGADS : 1 Yes 1 -1 -2 EGADS : 2 Yes 1 3 4 EGADS : 3 Yes 1 -5 1 7 -6 EGADS : 4 Yes 1 5 -8 -7 2 EGADS : 5 Yes 1 -9 -3 10 11 EGADS : 6 Yes 1 9 12 -10 -4 EGADS : 7 Yes 1 6 8 EGADS : 8 Yes 1 -11 -12 EGADS : Edge Node, Scale Factor, and Neighbor-Faces Information EGADS : ESF = Edge Scale Factor EGADS : Not applicable for DEGENERATE Edges or Edges with a FarField EGADS : Grid BC Neighbor Face. EGADS : Neighbor EGADS : Edge Body Active Node1 Node2 ESF Faces EGADS : 1 0 Yes 1 2 1 1 2 EGADS : 2 0 Yes 2 1 1 1 3 EGADS : 3 0 Yes 3 4 1 1 4 EGADS : 4 0 Yes 4 3 1 1 5 EGADS : 5 0 Yes 1 5 1 2 3 EGADS : 6 0 Yes 5 6 1 2 6 EGADS : 7 0 Yes 2 6 1 2 3 EGADS : 8 0 Yes 6 5 1 3 6 EGADS : 9 0 Yes 4 7 1 4 5 EGADS : 10 0 Yes 3 8 1 4 5 EGADS : 11 0 Yes 8 7 1 4 6 EGADS : 12 0 Yes 7 8 1 5 6 EGADS : Node Information EGADS : Node Active Coordinates EGADS : 1 Yes 2.4492936e-17 0 0 EGADS : 2 Yes 0 0 0.2 EGADS : 3 Yes 0 0 0.1 EGADS : 4 Yes 1.2246468e-17 0 0 EGADS : 5 Yes 2.4492936e-17 0.5 0 EGADS : 6 Yes 0 0.5 0.2 EGADS : 7 Yes 1.2246468e-17 0.5 0 EGADS : 8 Yes 0 0.5 0.1 EGADS : Face and Edge Match Information EGADS : No Face Matches Found AFLR4 : Surface Mesh Spacing Setup AFLR4 : Max Bounding Box Length = 1 AFLR4 : Min Bounding Box Length = 0.4 AFLR4 : Max Ref Bounding Box Length = 1 AFLR4 : Min Ref Bounding Box Length = 0.4 AFLR4 : Reference Length = 10 AFLR4 : BL Thickness = 0 AFLR4 : Abs Min Surf Spacing = 0.025 AFLR4 : Min Surf Spacing = 0.05 AFLR4 : Max Surf Spacing = 1 AFLR4 : Global Scale Factor = 1 AFLR4 : Geometry Definition Information AFLR4 : Definition Definition Composite Grid BC AFLR4 : ID Type ID Type AFLR4 : 0 glue-only composite - - AFLR4 : 1 CAD geometry 0 STD AFLR4 : 2 CAD geometry 0 STD AFLR4 : 3 CAD geometry 0 STD AFLR4 : 4 CAD geometry 0 STD AFLR4 : 5 CAD geometry 0 STD AFLR4 : 6 CAD geometry 0 STD AFLR4 : Define CAD surface definition 1 AFLR4 : Define CAD surface definition 2 AFLR4 : Define CAD surface definition 3 AFLR4 : Define CAD surface definition 4 AFLR4 : Define CAD surface definition 5 AFLR4 : Define CAD surface definition 6 AFLR4 : Surface Grid Generation AFLR4 : Generate optimal mesh on surface definition 1 AFLR2 : Nodes, Trias,Quads= 76 110 0 AFLR4 : Nodes, Trias,Quads= 68 94 0 AFLR4 : Generate optimal mesh on surface definition 2 AFLR2 : Nodes, Trias,Quads= 327 586 0 AFLR4 : Nodes, Trias,Quads= 325 582 0 AFLR4 : Generate optimal mesh on surface definition 3 AFLR2 : Nodes, Trias,Quads= 327 586 0 AFLR4 : Nodes, Trias,Quads= 327 586 0 AFLR4 : Generate optimal mesh on surface definition 4 AFLR2 : Nodes, Trias,Quads= 181 304 0 AFLR4 : Nodes, Trias,Quads= 180 302 0 AFLR4 : Generate optimal mesh on surface definition 5 AFLR2 : Nodes, Trias,Quads= 181 304 0 AFLR4 : Nodes, Trias,Quads= 180 302 0 AFLR4 : Generate optimal mesh on surface definition 6 AFLR2 : Nodes, Trias,Quads= 76 110 0 AFLR4 : Nodes, Trias,Quads= 68 94 0 DGEOM : Add surface definitions to composite definition 0 DGEOM : Glue composite surface definition 0 DGEOM : Nodes,Faces,BEdges= 980 1960 328 AFLR4 : Curvature BG Surface Grid Generation AFLR4 : Nodes, Faces = 980 1960 AFLR4 : Surface Grid Generation AFLR4 : Generate optimal mesh on surface definition 1 AFLR2 : Nodes, Trias,Quads= 76 110 0 AFLR4 : Nodes, Trias,Quads= 66 90 0 AFLR4 : Generate optimal mesh on surface definition 2 AFLR2 : Nodes, Trias,Quads= 327 586 0 AFLR4 : Nodes, Trias,Quads= 325 582 0 AFLR4 : Generate optimal mesh on surface definition 3 AFLR2 : Nodes, Trias,Quads= 327 586 0 AFLR4 : Nodes, Trias,Quads= 327 586 0 AFLR4 : Generate optimal mesh on surface definition 4 AFLR2 : Nodes, Trias,Quads= 181 304 0 AFLR4 : Nodes, Trias,Quads= 181 304 0 AFLR4 : Generate optimal mesh on surface definition 5 AFLR2 : Nodes, Trias,Quads= 181 304 0 AFLR4 : Nodes, Trias,Quads= 181 304 0 AFLR4 : Generate optimal mesh on surface definition 6 AFLR2 : Nodes, Trias,Quads= 76 110 0 AFLR4 : Nodes, Trias,Quads= 66 90 0 DGEOM : Add surface definitions to composite definition 0 DGEOM : Glue composite surface definition 0 DGEOM : Nodes,Faces,BEdges= 978 1956 328 OVERALL : CPU Time = 1.296 seconds --------------------------------------------------------------- AFLR4 : Multi-Zone Mode AFLR4 : Zone (Body) 2 --------------------------------------------------------------- EGADS : --------------------------------------- EGADS : Engineering Geometry Aircraft Design System EGADS : Version 1.25 EGADS : OpenCASCADE Version 7.6.0 EGADS : --------------------------------------- EGADS : EGADS CAD Geometry Setup EGADS : Model has 1 Active Bodies EGADS : Body 0 is a SolidBody EGADS : Body 0 has 1 Shells EGADS : Body 0 has 4 Faces EGADS : Body 0 has 6 Edges EGADS : Body 0 has 4 Loops EGADS : Body 0 has 4 Nodes EGADS : Check Grid BCs EGADS : Grid BCs are OK EGADS : Face Neighbor-Faces Information EGADS : QC = Face Quad Combination Flag EGADS : IER = Face Isolated Edge Refinement Flag EGADS : ER = Face Edge Refinement Factor EGADS : Not applicable for Faces with a FarField Grid BC. EGADS : SF = Face Scale Factor EGADS : Not applicable for Faces with a FarField Grid BC. EGADS : Face Body QC IER ER Scale Neighbor EGADS : ID Active ID Flag Flag Weight Factor Faces EGADS : 1 Yes 0 0 1 0 1 2 3 EGADS : 2 Yes 0 0 1 0 1 1 3 4 EGADS : 3 Yes 0 0 1 0 1 1 2 4 EGADS : 4 Yes 0 0 1 0 1 2 3 EGADS : Face Edges Information EGADS : Face Edges EGADS : 1 -1 -2 EGADS : 2 -3 1 5 -4 EGADS : 3 3 -6 -5 2 EGADS : 4 4 6 EGADS : Face Loops Information EGADS : Face Loops EGADS : 1 1 EGADS : 2 2 EGADS : 3 3 EGADS : 4 4 EGADS : Loop Edges Information EGADS : Loop Active Sense Edges EGADS : 1 Yes 1 -1 -2 EGADS : 2 Yes 1 -3 1 5 -4 EGADS : 3 Yes 1 3 -6 -5 2 EGADS : 4 Yes 1 4 6 EGADS : Edge Node, Scale Factor, and Neighbor-Faces Information EGADS : ESF = Edge Scale Factor EGADS : Not applicable for DEGENERATE Edges or Edges with a FarField EGADS : Grid BC Neighbor Face. EGADS : Neighbor EGADS : Edge Body Active Node1 Node2 ESF Faces EGADS : 1 0 Yes 1 2 1 1 2 EGADS : 2 0 Yes 2 1 1 1 3 EGADS : 3 0 Yes 1 3 1 2 3 EGADS : 4 0 Yes 3 4 1 2 4 EGADS : 5 0 Yes 2 4 1 2 3 EGADS : 6 0 Yes 4 3 1 3 4 EGADS : Node Information EGADS : Node Active Coordinates EGADS : 1 Yes 1.2246468e-17 0 0 EGADS : 2 Yes 0 0 0.1 EGADS : 3 Yes 1.2246468e-17 0.5 0 EGADS : 4 Yes 0 0.5 0.1 EGADS : Face and Edge Match Information EGADS : No Face Matches Found AFLR4 : Surface Mesh Spacing Setup AFLR4 : Max Bounding Box Length = 1 AFLR4 : Min Bounding Box Length = 0.2 AFLR4 : Max Ref Bounding Box Length = 1 AFLR4 : Min Ref Bounding Box Length = 0.2 AFLR4 : Reference Length = 10 AFLR4 : BL Thickness = 0 AFLR4 : Abs Min Surf Spacing = 0.025 AFLR4 : Min Surf Spacing = 0.05 AFLR4 : Max Surf Spacing = 1 AFLR4 : Global Scale Factor = 1 AFLR4 : Geometry Definition Information AFLR4 : Definition Definition Composite Grid BC AFLR4 : ID Type ID Type AFLR4 : 0 glue-only composite - - AFLR4 : 1 CAD geometry 0 STD AFLR4 : 2 CAD geometry 0 STD AFLR4 : 3 CAD geometry 0 STD AFLR4 : 4 CAD geometry 0 STD AFLR4 : Define CAD surface definition 1 AFLR4 : Define CAD surface definition 2 AFLR4 : Define CAD surface definition 3 AFLR4 : Define CAD surface definition 4 AFLR4 : Surface Grid Generation AFLR4 : Generate optimal mesh on surface definition 1 AFLR2 : Nodes, Trias,Quads= 31 44 0 AFLR4 : Nodes, Trias,Quads= 23 28 0 AFLR4 : Generate optimal mesh on surface definition 2 AFLR2 : Nodes, Trias,Quads= 182 306 0 AFLR4 : Nodes, Trias,Quads= 180 302 0 AFLR4 : Generate optimal mesh on surface definition 3 AFLR2 : Nodes, Trias,Quads= 182 306 0 AFLR4 : Nodes, Trias,Quads= 180 302 0 AFLR4 : Generate optimal mesh on surface definition 4 AFLR2 : Nodes, Trias,Quads= 31 44 0 AFLR4 : Nodes, Trias,Quads= 22 26 0 DGEOM : Add surface definitions to composite definition 0 DGEOM : Glue composite surface definition 0 DGEOM : Nodes,Faces,BEdges= 331 658 144 AFLR4 : Curvature BG Surface Grid Generation AFLR4 : Nodes, Faces = 331 658 AFLR4 : Surface Grid Generation AFLR4 : Generate optimal mesh on surface definition 1 AFLR2 : Nodes, Trias,Quads= 31 44 0 AFLR4 : Nodes, Trias,Quads= 25 32 0 AFLR4 : Generate optimal mesh on surface definition 2 AFLR2 : Nodes, Trias,Quads= 182 306 0 AFLR4 : Nodes, Trias,Quads= 180 302 0 AFLR4 : Generate optimal mesh on surface definition 3 AFLR2 : Nodes, Trias,Quads= 182 306 0 AFLR4 : Nodes, Trias,Quads= 180 302 0 AFLR4 : Generate optimal mesh on surface definition 4 AFLR2 : Nodes, Trias,Quads= 31 44 0 AFLR4 : Nodes, Trias,Quads= 25 32 0 DGEOM : Add surface definitions to composite definition 0 DGEOM : Glue composite surface definition 0 DGEOM : Nodes,Faces,BEdges= 336 668 144 OVERALL : CPU Time = 0.612 seconds --------------------------------------------------------------- EGADS : Zone (Body) 0 DGEOM : Add surface definitions to composite definition 0 DGEOM : Glue composite surface definition 0 DGEOM : Nodes,Faces,BEdges= 666 1332 232 EGADS : Zone (Body) 1 DGEOM : Add surface definitions to composite definition 0 DGEOM : Glue composite surface definition 0 DGEOM : Nodes,Faces,BEdges= 978 1956 328 EGADS : Zone (Body) 2 DGEOM : Add surface definitions to composite definition 0 DGEOM : Glue composite surface definition 0 DGEOM : Nodes,Faces,BEdges= 338 672 144 --------------------------------------------------------------- EGADS : Combine Multi-Zone Glue-Only Composites EGADS : Nodes,Faces,BEdges= 1982 3960 704 --------------------------------------------------------------- Body 1 (of 3) Number of nodes = 666 Number of elements = 1332 Number of node elements = 0 Number of line elements = 0 Number of triangle elements = 1332 Number of quadrilateral elements = 0 Body 2 (of 3) Number of nodes = 978 Number of elements = 1956 Number of node elements = 0 Number of line elements = 0 Number of triangle elements = 1956 Number of quadrilateral elements = 0 Body 3 (of 3) Number of nodes = 338 Number of elements = 672 Number of node elements = 0 Number of line elements = 0 Number of triangle elements = 672 Number of quadrilateral elements = 0 ---------------------------- Total number of nodes = 1982 Total number of elements = 3960 Mapping capsMesh attributes ................ Number of unique capsMesh attributes = 0 Mapping capsGroup attributes ................ Number of unique capsGroup attributes = 5 Name = box, index = 1 Name = cyl2, index = 2 Name = box;cyl2, index = 3 Name = cyl1, index = 4 Name = box;cyl1, index = 5 Getting volume mesh UG PARAM : SETTING INPUT PARAMETERS FROM ARGUMENT VECTOR UG PARAM : mrecm = 3 UG PARAM : mrecqm = 3 UG PARAM : mpfrmt = 0 AFLR2 : --------------------------------------- AFLR2 : AFLR2 LIBRARY AFLR2 : ADVANCING-FRONT/LOCAL-RECONNECTION AFLR2 : TRIA/QUAD GRID GENERATOR AFLR2 : Version Number 9.14.7 AFLR2 : Version Date 07/16/23 @ 01:42PM AFLR2 : Compile OS Linux 3.10.0-1160.88.1.el7.x86_64 x86_64 AFLR2 : Compile Date 07/25/23 @ 11:58AM AFLR2 : Copyright 1994-2021, D.L. Marcum AFLR2 : --------------------------------------- AFLR4 : --------------------------------------- AFLR4 : AFLR4 LIBRARY AFLR4 : ADVANCING-FRONT/LOCAL-RECONNECTION AFLR4 : TRIA/QUAD SURFACE GRID GENERATOR AFLR4 : Version Number 11.5.9 AFLR4 : Version Date 08/14/23 @ 12:27AM AFLR4 : Compile OS Linux 3.10.0-1160.88.1.el7.x86_64 x86_64 AFLR4 : Compile Date 08/14/23 @ 01:20PM AFLR4 : Copyright 1994-2021, D.L. Marcum AFLR4 : --------------------------------------- EGADS : --------------------------------------- EGADS : Engineering Geometry Aircraft Design System EGADS : Version 1.25 EGADS : OpenCASCADE Version 7.6.0 EGADS : --------------------------------------- EGADS : EGADS CAD Geometry Setup EGADS : Model has 3 Active Bodies EGADS : Body 0 is a SolidBody EGADS : Body 0 has 1 Shells EGADS : Body 0 has 8 Faces EGADS : Body 0 has 18 Edges EGADS : Body 0 has 10 Loops EGADS : Body 0 has 12 Nodes EGADS : Body 1 is a SolidBody EGADS : Body 1 has 1 Shells EGADS : Body 1 has 6 Faces EGADS : Body 1 has 12 Edges EGADS : Body 1 has 8 Loops EGADS : Body 1 has 8 Nodes EGADS : Body 2 is a SolidBody EGADS : Body 2 has 1 Shells EGADS : Body 2 has 4 Faces EGADS : Body 2 has 6 Edges EGADS : Body 2 has 4 Loops EGADS : Body 2 has 4 Nodes EGADS : Check Grid BCs EGADS : Grid BCs are OK EGADS : Face Neighbor-Faces Information EGADS : QC = Face Quad Combination Flag EGADS : IER = Face Isolated Edge Refinement Flag EGADS : ER = Face Edge Refinement Factor EGADS : Not applicable for Faces with a FarField Grid BC. EGADS : SF = Face Scale Factor EGADS : Not applicable for Faces with a FarField Grid BC. EGADS : Face Body QC IER ER Scale Neighbor EGADS : ID Active ID Flag Flag Weight Factor Faces EGADS : 1 Yes 0 0 1 0 1 2 3 4 5 EGADS : 2 Yes 0 0 1 0 1 1 3 5 6 7 8 EGADS : 3 Yes 0 0 1 0 1 1 2 4 6 EGADS : 4 Yes 0 0 1 0 1 1 3 5 6 7 8 EGADS : 5 Yes 0 0 1 0 1 1 2 4 6 EGADS : 6 Yes 0 0 1 0 1 2 3 4 5 EGADS : 7 Yes 0 0 1 0 1 2 4 8 EGADS : 8 Yes 0 0 1 0 1 2 4 7 EGADS : 9 Yes 1 0 1 0 1 10 11 12 13 EGADS : 10 Yes 1 0 1 0 1 9 11 14 EGADS : 11 Yes 1 0 1 0 1 9 10 14 EGADS : 12 Yes 1 0 1 0 1 9 13 14 EGADS : 13 Yes 1 0 1 0 1 9 12 14 EGADS : 14 Yes 1 0 1 0 1 10 11 12 13 EGADS : 15 Yes 2 0 1 0 1 16 17 EGADS : 16 Yes 2 0 1 0 1 15 17 18 EGADS : 17 Yes 2 0 1 0 1 15 16 18 EGADS : 18 Yes 2 0 1 0 1 16 17 EGADS : Face Edges Information EGADS : Face Edges EGADS : 1 1 2 -3 -4 EGADS : 2 5 6 -7 -1 8 9 EGADS : 3 -2 7 11 -10 EGADS : 4 -12 3 10 -13 -14 -15 EGADS : 5 4 12 -16 -5 EGADS : 6 -6 16 13 -11 EGADS : 7 -17 -8 18 14 EGADS : 8 17 15 -18 -9 EGADS : 9 -19 -20 21 22 EGADS : 10 -23 19 25 -24 EGADS : 11 23 -26 -25 20 EGADS : 12 -27 -21 28 29 EGADS : 13 27 30 -28 -22 EGADS : 14 24 26 -29 -30 EGADS : 15 -31 -32 EGADS : 16 -33 31 35 -34 EGADS : 17 33 -36 -35 32 EGADS : 18 34 36 EGADS : Face Loops Information EGADS : Face Loops EGADS : 1 1 EGADS : 2 2 3 EGADS : 3 4 EGADS : 4 5 6 EGADS : 5 7 EGADS : 6 8 EGADS : 7 9 EGADS : 8 10 EGADS : 9 11 12 EGADS : 10 13 EGADS : 11 14 EGADS : 12 15 EGADS : 13 16 EGADS : 14 17 18 EGADS : 15 19 EGADS : 16 20 EGADS : 17 21 EGADS : 18 22 EGADS : Loop Edges Information EGADS : Loop Active Sense Edges EGADS : 1 Yes 1 1 2 -3 -4 EGADS : 2 Yes 1 5 6 -7 -1 EGADS : 3 Yes 1 8 9 EGADS : 4 Yes 1 -2 7 11 -10 EGADS : 5 Yes 1 -12 3 10 -13 EGADS : 6 Yes 1 -14 -15 EGADS : 7 Yes 1 4 12 -16 -5 EGADS : 8 Yes 1 -6 16 13 -11 EGADS : 9 Yes 1 -17 -8 18 14 EGADS : 10 Yes 1 17 15 -18 -9 EGADS : 11 Yes 1 -19 -20 EGADS : 12 Yes 1 21 22 EGADS : 13 Yes 1 -23 19 25 -24 EGADS : 14 Yes 1 23 -26 -25 20 EGADS : 15 Yes 1 -27 -21 28 29 EGADS : 16 Yes 1 27 30 -28 -22 EGADS : 17 Yes 1 24 26 EGADS : 18 Yes 1 -29 -30 EGADS : 19 Yes 1 -31 -32 EGADS : 20 Yes 1 -33 31 35 -34 EGADS : 21 Yes 1 33 -36 -35 32 EGADS : 22 Yes 1 34 36 EGADS : Edge Node, Scale Factor, and Neighbor-Faces Information EGADS : ESF = Edge Scale Factor EGADS : Not applicable for DEGENERATE Edges or Edges with a FarField EGADS : Grid BC Neighbor Face. EGADS : Neighbor EGADS : Edge Body Active Node1 Node2 ESF Faces EGADS : 1 0 Yes 2 1 1 1 2 EGADS : 2 0 Yes 1 3 1 1 3 EGADS : 3 0 Yes 4 3 1 1 4 EGADS : 4 0 Yes 2 4 1 1 5 EGADS : 5 0 Yes 2 5 1 2 5 EGADS : 6 0 Yes 5 6 1 2 6 EGADS : 7 0 Yes 1 6 1 2 3 EGADS : 8 0 Yes 7 8 1 2 7 EGADS : 9 0 Yes 8 7 1 2 8 EGADS : 10 0 Yes 3 9 1 3 4 EGADS : 11 0 Yes 6 9 1 3 6 EGADS : 12 0 Yes 4 10 1 4 5 EGADS : 13 0 Yes 10 9 1 4 6 EGADS : 14 0 Yes 11 12 1 4 7 EGADS : 15 0 Yes 12 11 1 4 8 EGADS : 16 0 Yes 5 10 1 5 6 EGADS : 17 0 Yes 8 12 1 7 8 EGADS : 18 0 Yes 7 11 1 7 8 EGADS : 19 1 Yes 13 14 1 9 10 EGADS : 20 1 Yes 14 13 1 9 11 EGADS : 21 1 Yes 15 16 1 9 12 EGADS : 22 1 Yes 16 15 1 9 13 EGADS : 23 1 Yes 13 17 1 10 11 EGADS : 24 1 Yes 17 18 1 10 14 EGADS : 25 1 Yes 14 18 1 10 11 EGADS : 26 1 Yes 18 17 1 11 14 EGADS : 27 1 Yes 16 19 1 12 13 EGADS : 28 1 Yes 15 20 1 12 13 EGADS : 29 1 Yes 20 19 1 12 14 EGADS : 30 1 Yes 19 20 1 13 14 EGADS : 31 2 Yes 21 22 1 15 16 EGADS : 32 2 Yes 22 21 1 15 17 EGADS : 33 2 Yes 21 23 1 16 17 EGADS : 34 2 Yes 23 24 1 16 18 EGADS : 35 2 Yes 22 24 1 16 17 EGADS : 36 2 Yes 24 23 1 17 18 EGADS : Node Information EGADS : Node Active Coordinates EGADS : 1 Yes 0 0 0.5 EGADS : 2 Yes 0 0 0 EGADS : 3 Yes 0 0.5 0.5 EGADS : 4 Yes 0 0.5 0 EGADS : 5 Yes 0.5 0 0 EGADS : 6 Yes 0.5 0 0.5 EGADS : 7 Yes 0 0 0.2 EGADS : 8 Yes 0 0 0 EGADS : 9 Yes 0.5 0.5 0.5 EGADS : 10 Yes 0.5 0.5 0 EGADS : 11 Yes 0 0.5 0.2 EGADS : 12 Yes 0 0.5 0 EGADS : 13 Yes 0 0 0 EGADS : 14 Yes 0 0 0.2 EGADS : 15 Yes 0 0 0.1 EGADS : 16 Yes 0 0 0 EGADS : 17 Yes 0 0.5 0 EGADS : 18 Yes 0 0.5 0.2 EGADS : 19 Yes 0 0.5 0 EGADS : 20 Yes 0 0.5 0.1 EGADS : 21 Yes 0 0 0 EGADS : 22 Yes 0 0 0.1 EGADS : 23 Yes 0 0.5 0 EGADS : 24 Yes 0 0.5 0.1 EGADS : Face and Edge Match Information EGADS : Body 0 Face 7 Matches Body 1 Face 11 EGADS : Body 0 Face 8 Matches Body 1 Face 10 EGADS : Body 1 Face 12 Matches Body 2 Face 17 EGADS : Body 1 Face 13 Matches Body 2 Face 16 EGADS : Body 0 Edge 8 Matches Body 1 Edge 20 EGADS : Body 0 Edge 9 Matches Body 1 Edge 19 EGADS : Body 0 Edge 14 Matches Body 1 Edge 26 EGADS : Body 0 Edge 15 Matches Body 1 Edge 24 EGADS : Body 0 Edge 17 Matches Body 1 Edge 23 EGADS : Body 0 Edge 18 Matches Body 1 Edge 25 EGADS : Body 1 Edge 21 Matches Body 2 Edge 32 EGADS : Body 1 Edge 22 Matches Body 2 Edge 31 EGADS : Body 1 Edge 27 Matches Body 2 Edge 33 EGADS : Body 1 Edge 28 Matches Body 2 Edge 35 EGADS : Body 1 Edge 29 Matches Body 2 Edge 36 EGADS : Body 1 Edge 30 Matches Body 2 Edge 34 AFLR4 : Surface Mesh Spacing Setup AFLR4 : Max Bounding Box Length = 1 AFLR4 : Min Bounding Box Length = 1 AFLR4 : Max Ref Bounding Box Length = 1 AFLR4 : Min Ref Bounding Box Length = 1 AFLR4 : Reference Length = 1 AFLR4 : BL Thickness = 0 AFLR4 : Abs Min Surf Spacing = 0.0025 AFLR4 : Min Surf Spacing = 0.005 AFLR4 : Max Surf Spacing = 0.1 AFLR4 : Global Scale Factor = 1 AFLR4 : Geometry Definition Information AFLR4 : Definition Definition Composite Grid BC AFLR4 : ID Type ID Type AFLR4 : 0 glue-only composite - - AFLR4 : 1 CAD geometry 0 STD AFLR4 : 2 CAD geometry 0 STD AFLR4 : 3 CAD geometry 0 STD AFLR4 : 4 CAD geometry 0 STD AFLR4 : 5 CAD geometry 0 STD AFLR4 : 6 CAD geometry 0 STD AFLR4 : 7 CAD geometry 0 STD AFLR4 : 8 CAD geometry 0 STD AFLR4 : 9 CAD geometry 0 STD AFLR4 : 10 CAD geometry 0 STD AFLR4 : 11 CAD geometry 0 STD AFLR4 : 12 CAD geometry 0 STD AFLR4 : 13 CAD geometry 0 STD AFLR4 : 14 CAD geometry 0 STD AFLR4 : 15 CAD geometry 0 STD AFLR4 : 16 CAD geometry 0 STD AFLR4 : 17 CAD geometry 0 STD AFLR4 : 18 CAD geometry 0 STD AFLR4 : Define CAD surface definition 1 AFLR4 : Define CAD surface definition 2 AFLR4 : Define CAD surface definition 3 AFLR4 : Define CAD surface definition 4 AFLR4 : Define CAD surface definition 5 AFLR4 : Define CAD surface definition 6 AFLR4 : Define CAD surface definition 7 AFLR4 : Define CAD surface definition 8 AFLR4 : Define CAD surface definition 9 AFLR4 : Define CAD surface definition 10 AFLR4 : Define CAD surface definition 11 AFLR4 : Define CAD surface definition 12 AFLR4 : Define CAD surface definition 13 AFLR4 : Define CAD surface definition 14 AFLR4 : Define CAD surface definition 15 AFLR4 : Define CAD surface definition 16 AFLR4 : Define CAD surface definition 17 AFLR4 : Define CAD surface definition 18 AFLR43 : INPUT SURFACE MESH FROM TESS AFLR43 : Quad Surface Faces= 0 AFLR43 : Tria Surface Faces= 1332 AFLR43 : Nodes = 666 UG PARAM : SETTING INPUT PARAMETERS FROM ARGUMENT VECTOR UG PARAM : mrecm = 3 UG PARAM : mrecqm = 3 UG PARAM : mpfrmt = 0 AFLR3 : --------------------------------------- AFLR3 : AFLR3 LIBRARY AFLR3 : ADVANCING-FRONT/LOCAL-RECONNECTION AFLR3 : TETRAHEDRAL GRID GENERATOR AFLR3 : Version Number 16.32.49 AFLR3 : Version Date 07/26/23 @ 12:32AM AFLR3 : Compile OS Linux 3.10.0-1160.88.1.el7.x86_64 x86_64 AFLR3 : Compile Date 07/26/23 @ 01:49PM AFLR3 : Copyright 1994-2021, D.L. Marcum AFLR3 : --------------------------------------- AFLR3 IC : INPUT SURFACE GRID CHECK AFLR3 IC : Nodes, Elements = 666 0 UG3 : Boundary Conditions UG3 : B-Face ID Boundary Condition UG3 : 1 Solid UG3 : 2 Solid UG3 : 3 Solid UG3 : 4 Solid UG3 : 5 Solid UG3 : 6 Solid UG3 : 7 Solid UG3 : 8 Solid AFLR3 : CPU Time = 0.157 seconds AFLR3 IG : INITIAL VOLUME GRID GENERATION AFLR3 IG : Nodes, Elements = 666 0 AFLR3 IG : Nodes, Elements = 8 10 AFLR3 IG : Nodes, Elements = 134 879 AFLR3 IG : Nodes, Elements = 268 2014 AFLR3 IG : Nodes, Elements = 402 3255 AFLR3 IG : Nodes, Elements = 536 4567 AFLR3 IG : Nodes, Elements = 670 5792 AFLR3 IG : Nodes, Elements = 673 5816 AFLR3 IG : Nodes, Elements = 673 5805 AFLR3 IG : Nodes, Elements = 673 5887 AFLR3 IG : Nodes, Elements = 673 5790 AFLR3 IG : Nodes, Elements = 673 5873 AFLR3 IG : Nodes, Elements = 673 5870 AFLR3 IG : Nodes, Elements = 673 5768 AFLR3 IG : Nodes, Elements = 673 5861 AFLR3 IG : Nodes, Elements = 673 5787 AFLR3 IG : Nodes, Elements = 673 5861 AFLR3 IG : Nodes, Elements = 673 5858 AFLR3 IG : Nodes, Elements = 673 5783 AFLR3 IG : Nodes, Elements = 673 5858 AFLR3 IG : Nodes, Elements = 673 5790 AFLR3 IG : Nodes, Elements = 673 5855 AFLR3 IG : Nodes, Elements = 673 5852 AFLR3 IG : Nodes, Elements = 673 5782 AFLR3 IG : Nodes, Elements = 673 5854 AFLR3 IG : Nodes, Elements = 673 5788 AFLR3 IG : Nodes, Elements = 673 5853 AFLR3 IG : Nodes, Elements = 673 5850 AFLR3 IG : Nodes, Elements = 673 5780 AFLR3 IG : Nodes, Elements = 673 5816 AFLR3 IG : Nodes, Elements = 673 5763 AFLR3 IG : Nodes, Elements = 666 1628 AFLR3 IG : Nodes, Elements = 666 1629 AFLR3 IG : Nodes, Elements = 666 1589 AFLR3 IG : Nodes, Elements = 666 1577 AFLR3 : CPU Time = 2.522 seconds AFLR3 GG : ISOTROPIC VOLUME GRID GENERATION AFLR3 GG : Nodes, Elements = 666 1577 AFLR3 GG : Nodes, Elements = 763 1868 AFLR3 GG : Nodes, Elements = 763 2377 AFLR3 GG : Nodes, Elements = 763 2259 AFLR3 GG : Nodes, Elements = 853 2529 AFLR3 GG : Nodes, Elements = 853 2944 AFLR3 GG : Nodes, Elements = 853 2822 AFLR3 GG : Nodes, Elements = 900 2963 AFLR3 GG : Nodes, Elements = 900 3184 AFLR3 GG : Nodes, Elements = 900 3112 AFLR3 GG : Nodes, Elements = 923 3181 AFLR3 GG : Nodes, Elements = 923 3286 AFLR3 GG : Nodes, Elements = 923 3247 AFLR3 GG : Nodes, Elements = 926 3256 AFLR3 GG : Nodes, Elements = 926 3272 AFLR3 GG : Nodes, Elements = 926 3262 AFLR3 GG : Nodes, Elements = 928 3268 AFLR3 GG : Nodes, Elements = 928 3279 AFLR3 GG : Nodes, Elements = 928 3272 AFLR3 : CPU Time = 0.703 seconds AFLR3 QI : QUALITY IMPROVEMENT AFLR3 QI : Nodes, Elements = 928 3272 AFLR3 QI : Nodes, Elements = 927 3268 AFLR3 QI : Nodes, Elements = 927 3371 AFLR3 QI : Nodes, Elements = 927 3270 AFLR3 QI : Nodes, Elements = 927 3240 AFLR3 QI : Nodes, Elements = 927 3306 AFLR3 QI : Nodes, Elements = 927 3231 AFLR3 QI : Nodes, Elements = 927 3227 AFLR3 QI : Nodes, Elements = 927 3275 AFLR3 QI : Nodes, Elements = 927 3229 AFLR3 QI : Nodes, Elements = 927 3224 AFLR3 : CPU Time = 0.654 seconds AFLR3 : DONE UG3 : DIHEDRAL ANGLE CHECK UG3 : No. Tet Elems = 3224 UG3 : Min, Max Ang = 6.574 157.8 UG3 : Average Angle = 71.1 UG3 : No. Angle>160.0 = 0 UG3 : No. Angle>179.9 = 0 UG3 : VOL CHECK UG3 : Total-Volume = 0.875 UG3 : No. Tet Elems = 3224 UG3 : Min Vol = 7.44e-06 UG3 : Average Vol = 0.000272 UG3 : Total-Tet-Vol = 0.875 UG3 : No. Vol<TOL = 0 UG3 : Q VOL-LENGTH-RATIO CHECK 2/3 2 UG3 : Q = c * Vol / sum( L ) UG3 : 0 <= Q <= 1 UG3 : No. Tet Elems = 3224 UG3 : Min, Max Q = 0.0812 0.999 UG3 : Average Q = 0.659 UG3 : No. Q< 0.1 = 85 UG3 : No. Q< 0.01 = 0 OVERALL : CPU Time = 4.301 seconds UG3 : DIHEDRAL ANGLE CHECK UG3 : No. Tet Elems = 3224 UG3 : Min, Max Ang = 6.574 157.8 UG3 : Average Angle = 71.1 UG3 : No. Angle>160.0 = 0 UG3 : No. Angle>179.9 = 0 UG3 : VOL CHECK UG3 : Total-Volume = 0.875 UG3 : No. Tet Elems = 3224 UG3 : Min Vol = 7.44e-06 UG3 : Average Vol = 0.000272 UG3 : Total-Tet-Vol = 0.875 UG3 : No. Vol<TOL = 0 UG3 : Q VOL-LENGTH-RATIO CHECK 2/3 2 UG3 : Q = c * Vol / sum( L ) UG3 : 0 <= Q <= 1 UG3 : Note that L includes scaling for BL-aspect=ratio UG3 : No. Tet Elems = 3224 UG3 : Min, Max Q = 0.253 1 UG3 : Average Q = 0.75 UG3 : No. Q< 0.1 = 0 UG3 : No. Q< 0.01 = 0 UG3 : CPU Time = 0.000 seconds AFLR43 : INPUT SURFACE MESH FROM TESS AFLR43 : Quad Surface Faces= 0 AFLR43 : Tria Surface Faces= 1956 AFLR43 : Nodes = 978 UG PARAM : SETTING INPUT PARAMETERS FROM ARGUMENT VECTOR UG PARAM : mrecm = 3 UG PARAM : mrecqm = 3 UG PARAM : mpfrmt = 0 AFLR3 IC : INPUT SURFACE GRID CHECK AFLR3 IC : Nodes, Elements = 978 0 UG3 : Boundary Conditions UG3 : B-Face ID Boundary Condition UG3 : 9 Solid UG3 : 10 Solid UG3 : 11 Solid UG3 : 12 Solid UG3 : 13 Solid UG3 : 14 Solid AFLR3 : CPU Time = 0.079 seconds AFLR3 IG : INITIAL VOLUME GRID GENERATION AFLR3 IG : Nodes, Elements = 978 0 AFLR3 IG : Nodes, Elements = 8 10 AFLR3 IG : Nodes, Elements = 196 1168 AFLR3 IG : Nodes, Elements = 392 2452 AFLR3 IG : Nodes, Elements = 588 3783 AFLR3 IG : Nodes, Elements = 784 4954 AFLR3 IG : Nodes, Elements = 980 6115 AFLR3 IG : Nodes, Elements = 985 6143 AFLR3 IG : Nodes, Elements = 985 6127 AFLR3 IG : Nodes, Elements = 978 2869 AFLR3 IG : Nodes, Elements = 978 2886 AFLR3 IG : Nodes, Elements = 978 2802 AFLR3 : CPU Time = 0.603 seconds AFLR3 GG : ISOTROPIC VOLUME GRID GENERATION AFLR3 GG : Nodes, Elements = 978 2802 AFLR3 GG : Nodes, Elements = 1123 3237 AFLR3 GG : Nodes, Elements = 1123 3847 AFLR3 GG : Nodes, Elements = 1123 3640 AFLR3 GG : Nodes, Elements = 1215 3916 AFLR3 GG : Nodes, Elements = 1215 4339 AFLR3 GG : Nodes, Elements = 1215 4189 AFLR3 GG : Nodes, Elements = 1251 4297 AFLR3 GG : Nodes, Elements = 1251 4465 AFLR3 GG : Nodes, Elements = 1251 4416 AFLR3 GG : Nodes, Elements = 1254 4425 AFLR3 GG : Nodes, Elements = 1254 4439 AFLR3 GG : Nodes, Elements = 1254 4435 AFLR3 : CPU Time = 0.620 seconds AFLR3 QI : QUALITY IMPROVEMENT AFLR3 QI : Nodes, Elements = 1254 4435 AFLR3 QI : Nodes, Elements = 1254 4453 AFLR3 QI : Nodes, Elements = 1254 4437 AFLR3 QI : Nodes, Elements = 1254 4430 AFLR3 QI : Nodes, Elements = 1254 4433 AFLR3 QI : Nodes, Elements = 1254 4430 AFLR3 : CPU Time = 0.241 seconds AFLR3 : DONE UG3 : DIHEDRAL ANGLE CHECK UG3 : No. Tet Elems = 4430 UG3 : Min, Max Ang = 21.8 147.4 UG3 : Average Angle = 70.1 UG3 : No. Angle>160.0 = 0 UG3 : No. Angle>179.9 = 0 UG3 : VOL CHECK UG3 : Total-Volume = 0.0942 UG3 : No. Tet Elems = 4430 UG3 : Min Vol = 7.36e-06 UG3 : Average Vol = 2.13e-05 UG3 : Total-Tet-Vol = 0.0942 UG3 : No. Vol<TOL = 0 UG3 : Q VOL-LENGTH-RATIO CHECK 2/3 2 UG3 : Q = c * Vol / sum( L ) UG3 : 0 <= Q <= 1 UG3 : No. Tet Elems = 4430 UG3 : Min, Max Q = 0.525 0.999 UG3 : Average Q = 0.87 UG3 : No. Q< 0.1 = 0 UG3 : No. Q< 0.01 = 0 OVERALL : CPU Time = 1.682 seconds UG3 : DIHEDRAL ANGLE CHECK UG3 : No. Tet Elems = 4430 UG3 : Min, Max Ang = 21.8 147.4 UG3 : Average Angle = 70.1 UG3 : No. Angle>160.0 = 0 UG3 : No. Angle>179.9 = 0 UG3 : VOL CHECK UG3 : Total-Volume = 0.0942 UG3 : No. Tet Elems = 4430 UG3 : Min Vol = 7.36e-06 UG3 : Average Vol = 2.13e-05 UG3 : Total-Tet-Vol = 0.0942 UG3 : No. Vol<TOL = 0 UG3 : Q VOL-LENGTH-RATIO CHECK 2/3 2 UG3 : Q = c * Vol / sum( L ) UG3 : 0 <= Q <= 1 UG3 : Note that L includes scaling for BL-aspect=ratio UG3 : No. Tet Elems = 4430 UG3 : Min, Max Q = 0.544 1 UG3 : Average Q = 0.884 UG3 : No. Q< 0.1 = 0 UG3 : No. Q< 0.01 = 0 UG3 : CPU Time = 0.000 seconds AFLR43 : INPUT SURFACE MESH FROM TESS AFLR43 : Quad Surface Faces= 0 AFLR43 : Tria Surface Faces= 672 AFLR43 : Nodes = 338 UG PARAM : SETTING INPUT PARAMETERS FROM ARGUMENT VECTOR UG PARAM : mrecm = 3 UG PARAM : mrecqm = 3 UG PARAM : mpfrmt = 0 AFLR3 IC : INPUT SURFACE GRID CHECK AFLR3 IC : Nodes, Elements = 338 0 UG3 : Boundary Conditions UG3 : B-Face ID Boundary Condition UG3 : 15 Solid UG3 : 16 Solid UG3 : 17 Solid UG3 : 18 Solid AFLR3 : CPU Time = 0.031 seconds AFLR3 IG : INITIAL VOLUME GRID GENERATION AFLR3 IG : Nodes, Elements = 338 0 AFLR3 IG : Nodes, Elements = 8 10 AFLR3 IG : Nodes, Elements = 68 376 AFLR3 IG : Nodes, Elements = 136 824 AFLR3 IG : Nodes, Elements = 204 1273 AFLR3 IG : Nodes, Elements = 272 1705 AFLR3 IG : Nodes, Elements = 340 2198 AFLR3 IG : Nodes, Elements = 345 2239 AFLR3 IG : Nodes, Elements = 345 2234 AFLR3 IG : Nodes, Elements = 338 1326 AFLR3 IG : Nodes, Elements = 338 1331 AFLR3 IG : Nodes, Elements = 338 1137 AFLR3 IG : Nodes, Elements = 338 969 AFLR3 : CPU Time = 0.257 seconds AFLR3 GG : ISOTROPIC VOLUME GRID GENERATION AFLR3 GG : Nodes, Elements = 338 969 AFLR3 GG : Nodes, Elements = 387 1116 AFLR3 GG : Nodes, Elements = 387 1207 AFLR3 GG : Nodes, Elements = 387 1132 AFLR3 GG : Nodes, Elements = 421 1234 AFLR3 GG : Nodes, Elements = 421 1416 AFLR3 GG : Nodes, Elements = 421 1343 AFLR3 GG : Nodes, Elements = 435 1385 AFLR3 GG : Nodes, Elements = 435 1440 AFLR3 GG : Nodes, Elements = 435 1424 AFLR3 GG : Nodes, Elements = 441 1442 AFLR3 GG : Nodes, Elements = 441 1463 AFLR3 GG : Nodes, Elements = 441 1456 AFLR3 : CPU Time = 0.226 seconds AFLR3 QI : QUALITY IMPROVEMENT AFLR3 QI : Nodes, Elements = 441 1456 AFLR3 QI : Nodes, Elements = 439 1444 AFLR3 QI : Nodes, Elements = 439 1451 AFLR3 QI : Nodes, Elements = 439 1440 AFLR3 QI : Nodes, Elements = 439 1435 AFLR3 QI : Nodes, Elements = 439 1438 AFLR3 QI : Nodes, Elements = 439 1435 AFLR3 QI : Nodes, Elements = 439 1434 AFLR3 : CPU Time = 0.078 seconds AFLR3 : DONE UG3 : DIHEDRAL ANGLE CHECK UG3 : No. Tet Elems = 1434 UG3 : Min, Max Ang = 17.63 154.6 UG3 : Average Angle = 70.1 UG3 : No. Angle>160.0 = 0 UG3 : No. Angle>179.9 = 0 UG3 : VOL CHECK UG3 : Total-Volume = 0.0305 UG3 : No. Tet Elems = 1434 UG3 : Min Vol = 6.04e-06 UG3 : Average Vol = 2.12e-05 UG3 : Total-Tet-Vol = 0.0305 UG3 : No. Vol<TOL = 0 UG3 : Q VOL-LENGTH-RATIO CHECK 2/3 2 UG3 : Q = c * Vol / sum( L ) UG3 : 0 <= Q <= 1 UG3 : No. Tet Elems = 1434 UG3 : Min, Max Q = 0.438 0.999 UG3 : Average Q = 0.854 UG3 : No. Q< 0.1 = 0 UG3 : No. Q< 0.01 = 0 OVERALL : CPU Time = 0.658 seconds UG3 : DIHEDRAL ANGLE CHECK UG3 : No. Tet Elems = 1434 UG3 : Min, Max Ang = 17.63 154.6 UG3 : Average Angle = 70.1 UG3 : No. Angle>160.0 = 0 UG3 : No. Angle>179.9 = 0 UG3 : VOL CHECK UG3 : Total-Volume = 0.0305 UG3 : No. Tet Elems = 1434 UG3 : Min Vol = 6.04e-06 UG3 : Average Vol = 2.12e-05 UG3 : Total-Tet-Vol = 0.0305 UG3 : No. Vol<TOL = 0 UG3 : Q VOL-LENGTH-RATIO CHECK 2/3 2 UG3 : Q = c * Vol / sum( L ) UG3 : 0 <= Q <= 1 UG3 : Note that L includes scaling for BL-aspect=ratio UG3 : No. Tet Elems = 1434 UG3 : Min, Max Q = 0.454 1 UG3 : Average Q = 0.868 UG3 : No. Q< 0.1 = 0 UG3 : No. Q< 0.01 = 0 UG3 : CPU Time = 0.000 seconds EGADS : --------------------------------------- EGADS : Engineering Geometry Aircraft Design System EGADS : Version 1.25 EGADS : OpenCASCADE Version 7.6.0 EGADS : --------------------------------------- EGADS : CREATE EGADS TESS FROM AFLR3 DATA EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 1 EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 2 EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 3 EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 4 EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 5 EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 6 EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 7 EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 8 EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 9 EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 10 EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 11 EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 12 EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 13 EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 14 EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 15 EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 16 EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 17 EGADS : CREATING TESSELLATION FOR BODY 0 EDGE 18 EGADS : CREATING TESSELLATION FOR BODY 0 FACE 1 EGADS : CREATING TESSELLATION FOR BODY 0 FACE 2 EGADS : CREATING TESSELLATION FOR BODY 0 FACE 3 EGADS : CREATING TESSELLATION FOR BODY 0 FACE 4 EGADS : CREATING TESSELLATION FOR BODY 0 FACE 5 EGADS : CREATING TESSELLATION FOR BODY 0 FACE 6 EGADS : CREATING TESSELLATION FOR BODY 0 FACE 7 EGADS : CREATING TESSELLATION FOR BODY 0 FACE 8 EGADS : CREATING TESSELLATION FOR BODY 1 EDGE 19 EGADS : CREATING TESSELLATION FOR BODY 1 EDGE 20 EGADS : CREATING TESSELLATION FOR BODY 1 EDGE 21 EGADS : CREATING TESSELLATION FOR BODY 1 EDGE 22 EGADS : CREATING TESSELLATION FOR BODY 1 EDGE 23 EGADS : CREATING TESSELLATION FOR BODY 1 EDGE 24 EGADS : CREATING TESSELLATION FOR BODY 1 EDGE 25 EGADS : CREATING TESSELLATION FOR BODY 1 EDGE 26 EGADS : CREATING TESSELLATION FOR BODY 1 EDGE 27 EGADS : CREATING TESSELLATION FOR BODY 1 EDGE 28 EGADS : CREATING TESSELLATION FOR BODY 1 EDGE 29 EGADS : CREATING TESSELLATION FOR BODY 1 EDGE 30 EGADS : CREATING TESSELLATION FOR BODY 1 FACE 9 EGADS : CREATING TESSELLATION FOR BODY 1 FACE 10 EGADS : CREATING TESSELLATION FOR BODY 1 FACE 11 EGADS : CREATING TESSELLATION FOR BODY 1 FACE 12 EGADS : CREATING TESSELLATION FOR BODY 1 FACE 13 EGADS : CREATING TESSELLATION FOR BODY 1 FACE 14 EGADS : CREATING TESSELLATION FOR BODY 2 EDGE 31 EGADS : CREATING TESSELLATION FOR BODY 2 EDGE 32 EGADS : CREATING TESSELLATION FOR BODY 2 EDGE 33 EGADS : CREATING TESSELLATION FOR BODY 2 EDGE 34 EGADS : CREATING TESSELLATION FOR BODY 2 EDGE 35 EGADS : CREATING TESSELLATION FOR BODY 2 EDGE 36 EGADS : CREATING TESSELLATION FOR BODY 2 FACE 15 EGADS : CREATING TESSELLATION FOR BODY 2 FACE 16 EGADS : CREATING TESSELLATION FOR BODY 2 FACE 17 EGADS : CREATING TESSELLATION FOR BODY 2 FACE 18 EGADS : EGADS TESS CREATED EGADS : CHECK TESS FACE NODE MAP EGADS : CHECKING NODE MAP FOR BODY 0 FACE 1 EGADS : CHECKING NODE MAP FOR BODY 0 FACE 2 EGADS : CHECKING NODE MAP FOR BODY 0 FACE 3 EGADS : CHECKING NODE MAP FOR BODY 0 FACE 4 EGADS : CHECKING NODE MAP FOR BODY 0 FACE 5 EGADS : CHECKING NODE MAP FOR BODY 0 FACE 6 EGADS : CHECKING NODE MAP FOR BODY 0 FACE 7 EGADS : CHECKING NODE MAP FOR BODY 0 FACE 8 EGADS : CHECKING NODE MAP FOR BODY 1 FACE 9 EGADS : CHECKING NODE MAP FOR BODY 1 FACE 10 EGADS : CHECKING NODE MAP FOR BODY 1 FACE 11 EGADS : CHECKING NODE MAP FOR BODY 1 FACE 12 EGADS : CHECKING NODE MAP FOR BODY 1 FACE 13 EGADS : CHECKING NODE MAP FOR BODY 1 FACE 14 EGADS : CHECKING NODE MAP FOR BODY 2 FACE 15 EGADS : CHECKING NODE MAP FOR BODY 2 FACE 16 EGADS : CHECKING NODE MAP FOR BODY 2 FACE 17 EGADS : CHECKING NODE MAP FOR BODY 2 FACE 18 Volume mesh: Number of nodes = 1690 Number of elements = 9496 Number of triangles = 408 Number of quadrilatarals = 0 Number of tetrahedrals = 9088 Number of pyramids = 0 Number of prisms = 0 Number of hexahedrals = 0 Writing VTK file: volume.vtk.... Finished writing VTK file Writing exodus file .... Block: 'Volume_1_tet', blk_id 1, num_entries 3224 Block: 'Volume_2_tet', blk_id 2, num_entries 4430 Block: 'Volume_3_tet', blk_id 3, num_entries 1434 Sideset: 'box', set_id 1, num_entries 408 Sideset: 'cyl1', set_id 2, num_entries 64 Sideset: 'cyl2', set_id 3, num_entries 180 Finished writing Exodus file ==123961== ==123961== HEAP SUMMARY: ==123961== in use at exit: 4,307,968 bytes in 23,727 blocks ==123961== total heap usage: 1,162,103 allocs, 1,138,376 frees, 466,713,476 bytes allocated ==123961== ==123961== LEAK SUMMARY: ==123961== definitely lost: 0 bytes in 0 blocks ==123961== indirectly lost: 0 bytes in 0 blocks ==123961== possibly lost: 0 bytes in 0 blocks ==123961== still reachable: 0 bytes in 0 blocks ==123961== suppressed: 4,307,968 bytes in 23,727 blocks ==123961== ==123961== For lists of detected and suppressed errors, rerun with: -s ==123961== ERROR SUMMARY: 0 errors from 0 contexts (suppressed: 1400 from 1400) 63.53user 1.34system 1:04.97elapsed 99%CPU (0avgtext+0avgdata 479372maxresident)k 0inputs+8400outputs (0major+385335minor)pagefaults 0swaps real 1m4.978s user 1m3.534s sys 0m1.385s + status=0 + set +x ================================================= CAPS verification (using pyCAPS) case plato_aflr_cyli_box_PyTest.py passed (as expected) ================================================= ================================================= + echo 'plato_aflr_airfoil_morph_PyTest.py test;' + tee -a /jenkins/workspace/ESP_ValgrindCaps/7.6/CAPS/STRUCTURE/LINUX64/ESP/LINUX64/examples/regressionTest/pyCAPSlog.txt plato_aflr_airfoil_morph_PyTest.py test; + time valgrind --tool=memcheck --error-exitcode=0 --leak-check=yes --show-leak-kinds=all --keep-debuginfo=yes --gen-suppressions=all --max-stackframe=4000000 --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.6/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-AFLR.supp --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.6/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-exodus.supp --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.6/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-IRIT.supp --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.6/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-MKL.supp --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.6/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-python.supp --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.6/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-Tblade3.supp --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.6/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-Ubuntu.supp --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.6/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-OCC7.6.supp python -u plato_aflr_airfoil_morph_PyTest.py -outLevel=0 + tee -a /jenkins/workspace/ESP_ValgrindCaps/7.6/CAPS/STRUCTURE/LINUX64/ESP/LINUX64/examples/regressionTest/pyCAPSlog.txt ==137518== Memcheck, a memory error detector ==137518== Copyright (C) 2002-2017, and GNU GPL'd, by Julian Seward et al. ==137518== Using Valgrind-3.18.1 and LibVEX; rerun with -h for copyright info ==137518== Command: python -u plato_aflr_airfoil_morph_PyTest.py -outLevel=0 ==137518== Mapping capsMesh attributes ................ Number of unique capsMesh attributes = 5 Name = 2DSlice, index = 1 Name = TunnelWall, index = 2 Name = OutFlow, index = 3 Name = InFlow, index = 4 Name = Airfoil, index = 5 Mapping capsGroup attributes ................ Number of unique capsGroup attributes = 4 Name = TunnelWall, index = 1 Name = OutFlow, index = 2 Name = InFlow, index = 3 Name = Airfoil, index = 4 Getting 2D mesh for body 1 (of 1) AFLR2 : --------------------------------------- AFLR2 : AFLR2 LIBRARY AFLR2 : ADVANCING-FRONT/LOCAL-RECONNECTION AFLR2 : TRIA/QUAD GRID GENERATOR AFLR2 : Version Number 9.14.7 AFLR2 : Version Date 07/16/23 @ 01:42PM AFLR2 : Compile OS Linux 3.10.0-1160.88.1.el7.x86_64 x86_64 AFLR2 : Compile Date 07/25/23 @ 11:58AM AFLR2 : Copyright 1994-2021, D.L. Marcum AFLR2 : --------------------------------------- AFLR2 IC : INPUT DATA CHECK AFLR2 IC : Nodes, Faces = 420 0 AFLR2 : CPU Time = 0.030 seconds AFLR2 EG : EDGE GRID RE-GENERATION AFLR2 EG : Nodes, Edges = 420 420 AFLR2 : CPU Time = 0.002 seconds AFLR2 IG : INITIAL GRID GENERATION AFLR2 IG : Nodes, Faces = 0 2 AFLR2 IG : Nodes, Faces = 84 170 AFLR2 IG : Nodes, Faces = 168 338 AFLR2 IG : Nodes, Faces = 252 506 AFLR2 IG : Nodes, Faces = 336 674 AFLR2 IG : Nodes, Faces = 344 690 AFLR2 IG : Nodes, Faces = 345 692 AFLR2 IG : Nodes, Faces = 420 842 AFLR2 IG : Nodes, Faces = 424 842 AFLR2 IG : Nodes, Faces = 420 420 AFLR2 : CPU Time = 0.089 seconds AFLR2 GG : FIELD GRID GENERATION AFLR2 GG : Nodes, Faces = 420 420 AFLR2 GG : Nodes, Faces = 832 1244 AFLR2 GG : Nodes, Faces = 1237 2054 AFLR2 GG : Nodes, Faces = 1634 2848 AFLR2 GG : Nodes, Faces = 2032 3644 AFLR2 GG : Nodes, Faces = 2422 4424 AFLR2 GG : Nodes, Faces = 2801 5182 AFLR2 GG : Nodes, Faces = 3177 5934 AFLR2 GG : Nodes, Faces = 3550 6680 AFLR2 GG : Nodes, Faces = 3915 7410 AFLR2 GG : Nodes, Faces = 4276 8132 AFLR2 GG : Nodes, Faces = 4630 8840 AFLR2 GG : Nodes, Faces = 4978 9536 AFLR2 GG : Nodes, Faces = 5320 10220 AFLR2 GG : Nodes, Faces = 5657 10894 AFLR2 GG : Nodes, Faces = 5984 11548 AFLR2 GG : Nodes, Faces = 6308 12196 AFLR2 GG : Nodes, Faces = 6626 12832 AFLR2 GG : Nodes, Faces = 6946 13472 AFLR2 GG : Nodes, Faces = 7256 14092 AFLR2 GG : Nodes, Faces = 7561 14702 AFLR2 GG : Nodes, Faces = 7855 15290 AFLR2 GG : Nodes, Faces = 8141 15862 AFLR2 GG : Nodes, Faces = 8421 16422 AFLR2 GG : Nodes, Faces = 8695 16970 AFLR2 GG : Nodes, Faces = 8967 17514 AFLR2 GG : Nodes, Faces = 9220 18020 AFLR2 GG : Nodes, Faces = 9475 18530 AFLR2 GG : Nodes, Faces = 9726 19032 AFLR2 GG : Nodes, Faces = 9971 19522 AFLR2 GG : Nodes, Faces = 10170 19920 AFLR2 GG : Nodes, Faces = 10351 20282 AFLR2 GG : Nodes, Faces = 10525 20630 AFLR2 GG : Nodes, Faces = 10695 20970 AFLR2 GG : Nodes, Faces = 10864 21308 AFLR2 GG : Nodes, Faces = 11038 21656 AFLR2 GG : Nodes, Faces = 11205 21990 AFLR2 GG : Nodes, Faces = 11358 22296 AFLR2 GG : Nodes, Faces = 11490 22560 AFLR2 GG : Nodes, Faces = 11598 22776 AFLR2 GG : Nodes, Faces = 11695 22970 AFLR2 GG : Nodes, Faces = 11776 23132 AFLR2 GG : Nodes, Faces = 11847 23274 AFLR2 GG : Nodes, Faces = 11913 23406 AFLR2 GG : Nodes, Faces = 11970 23520 AFLR2 GG : Nodes, Faces = 12021 23622 AFLR2 GG : Nodes, Faces = 12074 23728 AFLR2 GG : Nodes, Faces = 12116 23812 AFLR2 GG : Nodes, Faces = 12157 23894 AFLR2 GG : Nodes, Faces = 12188 23956 AFLR2 GG : Nodes, Faces = 12212 24004 AFLR2 GG : Nodes, Faces = 12232 24044 AFLR2 GG : Nodes, Faces = 12242 24064 AFLR2 GG : Nodes, Faces = 12244 24068 AFLR2 : CPU Time = 0.440 seconds AFLR2 QI : QUALITY IMPROVEMENT AFLR2 QI : Nodes, Faces = 12244 24068 AFLR2 : CPU Time = 0.091 seconds AFLR2 : DONE Writing AFLR3 file .... Finished writing AFLR3 file Number of nodes = 12244 Number of elements = 24488 Number of tris = 24068 Number of quad = 0 Writing exodus file .... Exodus expects 2D meshes be in the x-y plane... attempting to rotate mesh! Swapping z and y coordinates! Block: 'Block1', blk_id 1, num_entries 24068 Sideset: 'Airfoil', set_id 1, num_entries 36 Sideset: 'InFlow', set_id 2, num_entries 64 Sideset: 'OutFlow', set_id 3, num_entries 64 Sideset: 'TunnelWall', set_id 4, num_entries 256 Finished writing Exodus file Projecting tessellation 1 (of 1) on to new body ==137518== ==137518== HEAP SUMMARY: ==137518== in use at exit: 4,231,794 bytes in 23,535 blocks ==137518== total heap usage: 886,214 allocs, 862,679 frees, 426,218,138 bytes allocated ==137518== ==137518== LEAK SUMMARY: ==137518== definitely lost: 0 bytes in 0 blocks ==137518== indirectly lost: 0 bytes in 0 blocks ==137518== possibly lost: 0 bytes in 0 blocks ==137518== still reachable: 0 bytes in 0 blocks ==137518== suppressed: 4,231,794 bytes in 23,535 blocks ==137518== ==137518== For lists of detected and suppressed errors, rerun with: -s ==137518== ERROR SUMMARY: 0 errors from 0 contexts (suppressed: 1408 from 1408) 63.49user 1.46system 1:05.00elapsed 99%CPU (0avgtext+0avgdata 516340maxresident)k 0inputs+9224outputs (0major+574476minor)pagefaults 0swaps real 1m5.010s user 1m3.502s sys 0m1.470s + status=0 + set +x ================================================= CAPS verification (using pyCAPS) case plato_aflr_airfoil_morph_PyTest.py passed (as expected) ================================================= ================================================= + echo 'plato_tetgen_table_PyTest.py test;' + tee -a /jenkins/workspace/ESP_ValgrindCaps/7.6/CAPS/STRUCTURE/LINUX64/ESP/LINUX64/examples/regressionTest/pyCAPSlog.txt plato_tetgen_table_PyTest.py test; + time valgrind --tool=memcheck --error-exitcode=0 --leak-check=yes --show-leak-kinds=all --keep-debuginfo=yes --gen-suppressions=all --max-stackframe=4000000 --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.6/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-AFLR.supp --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.6/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-exodus.supp --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.6/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-IRIT.supp --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.6/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-MKL.supp --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.6/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-python.supp --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.6/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-Tblade3.supp --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.6/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-Ubuntu.supp --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.6/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-OCC7.6.supp python -u plato_tetgen_table_PyTest.py -outLevel=0 + tee -a /jenkins/workspace/ESP_ValgrindCaps/7.6/CAPS/STRUCTURE/LINUX64/ESP/LINUX64/examples/regressionTest/pyCAPSlog.txt ==181564== Memcheck, a memory error detector ==181564== Copyright (C) 2002-2017, and GNU GPL'd, by Julian Seward et al. ==181564== Using Valgrind-3.18.1 and LibVEX; rerun with -h for copyright info ==181564== Command: python -u plato_tetgen_table_PyTest.py -outLevel=0 ==181564== Mapping capsGroup attributes ................ Number of unique capsGroup attributes = 5 Name = tableTopSide, index = 1 Name = leg0Side, index = 2 Name = leg1Side, index = 3 Name = leg2Side, index = 4 Name = leg3Side, index = 5 Mapping capsMesh attributes ................ Number of unique capsMesh attributes = 0 Getting surface mesh for body 1 (of 5) Getting surface mesh for body 2 (of 5) Getting surface mesh for body 3 (of 5) Getting surface mesh for body 4 (of 5) Getting surface mesh for body 5 (of 5) Body 1 (of 5) Number of nodes = 642 Number of elements = 1280 Number of node elements = 0 Number of line elements = 0 Number of triangle elements = 1280 Number of quadrilateral elements = 0 Body 2 (of 5) Number of nodes = 1070 Number of elements = 2136 Number of node elements = 0 Number of line elements = 0 Number of triangle elements = 2136 Number of quadrilateral elements = 0 Body 3 (of 5) Number of nodes = 1070 Number of elements = 2136 Number of node elements = 0 Number of line elements = 0 Number of triangle elements = 2136 Number of quadrilateral elements = 0 Body 4 (of 5) Number of nodes = 1070 Number of elements = 2136 Number of node elements = 0 Number of line elements = 0 Number of triangle elements = 2136 Number of quadrilateral elements = 0 Body 5 (of 5) Number of nodes = 1070 Number of elements = 2136 Number of node elements = 0 Number of line elements = 0 Number of triangle elements = 2136 Number of quadrilateral elements = 0 ---------------------------- Total number of nodes = 4922 Total number of elements = 9824 Mapping capsGroup attributes ................ Number of unique capsGroup attributes = 5 Name = tableTopSide, index = 1 Name = leg0Side, index = 2 Name = leg1Side, index = 3 Name = leg2Side, index = 4 Name = leg3Side, index = 5 Body 1 number of surface: nodes - 642, elements - 1280 Body 2 number of surface: nodes - 1070, elements - 2136 Body 3 number of surface: nodes - 1070, elements - 2136 Body 4 number of surface: nodes - 1070, elements - 2136 Body 5 number of surface: nodes - 1070, elements - 2136 Getting volume mesh Generating volume mesh using TetGen..... Tetgen input string = pYq1.500/0.000T1.00e-16A Delaunizing vertices... Delaunay seconds: 0.944994 Creating surface mesh ... Surface mesh seconds: 0.033155 Recovering boundaries... Boundary recovery seconds: 0.21029 Removing exterior tetrahedra ... Spreading region attributes. Exterior tets removal seconds: 0.022581 Recovering Delaunayness... Delaunay recovery seconds: 0.289558 Refining mesh... Refinement seconds: 0.05677 Improving mesh... Mesh improvement seconds: 0.024906 Writing nodes. Writing elements. Writing faces. Writing edges. Output seconds: 0.012592 Total running seconds: 1.59862 Statistics: Input points: 642 Input facets: 1280 Input segments: 1920 Input holes: 0 Input regions: 1 Mesh points: 642 Mesh tetrahedra: 1722 Mesh faces: 4084 Mesh faces on exterior boundary: 1280 Mesh faces on input facets: 1280 Mesh edges on input segments: 1920 Generating volume mesh using TetGen..... Tetgen input string = pYq1.500/0.000T1.00e-16A Delaunizing vertices... Delaunay seconds: 3.333 Creating surface mesh ... Surface mesh seconds: 0.062079 Recovering boundaries... Boundary recovery seconds: 0.220549 Removing exterior tetrahedra ... Warning: The 1-th region point lies outside the convex hull. Spreading region attributes. Exterior tets removal seconds: 0.03892 Recovering Delaunayness... Delaunay recovery seconds: 1.18036 Refining mesh... Refinement seconds: 2.87507 Smoothing vertices... Mesh smoothing seconds: 2.63401 Improving mesh... Mesh improvement seconds: 0.055705 Writing nodes. Writing elements. Writing faces. Writing edges. Output seconds: 0.007726 Total running seconds: 10.4089 Statistics: Input points: 1070 Input facets: 2136 Input segments: 3204 Input holes: 0 Input regions: 2 Mesh points: 1315 Mesh tetrahedra: 4460 Mesh faces: 9988 Mesh faces on exterior boundary: 2136 Mesh faces on input facets: 2136 Mesh edges on input segments: 3204 Steiner points inside domain: 245 Generating volume mesh using TetGen..... Tetgen input string = pYq1.500/0.000T1.00e-16A Delaunizing vertices... Delaunay seconds: 3.05219 Creating surface mesh ... Surface mesh seconds: 0.033615 Recovering boundaries... Boundary recovery seconds: 0.158824 Removing exterior tetrahedra ... Warning: The 1-th region point lies outside the convex hull. Warning: The 2-th region point lies outside the convex hull. Spreading region attributes. Exterior tets removal seconds: 0.021922 Recovering Delaunayness... Delaunay recovery seconds: 1.19052 Refining mesh... Refinement seconds: 2.74742 Smoothing vertices... Mesh smoothing seconds: 2.85523 Improving mesh... Mesh improvement seconds: 0.064229 Writing nodes. Writing elements. Writing faces. Writing edges. Output seconds: 0.008269 Total running seconds: 10.1346 Statistics: Input points: 1070 Input facets: 2136 Input segments: 3204 Input holes: 0 Input regions: 3 Mesh points: 1314 Mesh tetrahedra: 4436 Mesh faces: 9940 Mesh faces on exterior boundary: 2136 Mesh faces on input facets: 2136 Mesh edges on input segments: 3204 Steiner points inside domain: 244 Generating volume mesh using TetGen..... Tetgen input string = pYq1.500/0.000T1.00e-16A Delaunizing vertices... Delaunay seconds: 3.33857 Creating surface mesh ... Surface mesh seconds: 0.063833 Recovering boundaries... Boundary recovery seconds: 0.248882 Removing exterior tetrahedra ... Warning: The 1-th region point lies outside the convex hull. Warning: The 2-th region point lies outside the convex hull. Warning: The 3-th region point lies outside the convex hull. Spreading region attributes. Exterior tets removal seconds: 0.034731 Recovering Delaunayness... Delaunay recovery seconds: 1.353 Refining mesh... Refinement seconds: 2.39178 Smoothing vertices... Mesh smoothing seconds: 2.23454 Improving mesh... Mesh improvement seconds: 0.038826 Writing nodes. Writing elements. Writing faces. Writing edges. Output seconds: 0.004474 Total running seconds: 9.71003 Statistics: Input points: 1070 Input facets: 2136 Input segments: 3204 Input holes: 0 Input regions: 4 Mesh points: 1317 Mesh tetrahedra: 4459 Mesh faces: 9986 Mesh faces on exterior boundary: 2136 Mesh faces on input facets: 2136 Mesh edges on input segments: 3204 Steiner points inside domain: 247 Generating volume mesh using TetGen..... Tetgen input string = pYq1.500/0.000T1.00e-16A Delaunizing vertices... Delaunay seconds: 4.23573 Creating surface mesh ... Surface mesh seconds: 0.05713 Recovering boundaries... Boundary recovery seconds: 0.253857 Removing exterior tetrahedra ... Warning: The 1-th region point lies outside the convex hull. Warning: The 2-th region point lies outside the convex hull. Warning: The 3-th region point lies outside the convex hull. Warning: The 4-th region point lies outside the convex hull. Spreading region attributes. Exterior tets removal seconds: 0.036958 Recovering Delaunayness... Delaunay recovery seconds: 1.32503 Refining mesh... Refinement seconds: 2.78078 Smoothing vertices... Mesh smoothing seconds: 3.00631 Improving mesh... Mesh improvement seconds: 0.062252 Writing nodes. Writing elements. Writing faces. Writing edges. Output seconds: 0.008372 Total running seconds: 11.7679 Statistics: Input points: 1070 Input facets: 2136 Input segments: 3204 Input holes: 0 Input regions: 5 Mesh points: 1312 Mesh tetrahedra: 4414 Mesh faces: 9896 Mesh faces on exterior boundary: 2136 Mesh faces on input facets: 2136 Mesh edges on input segments: 3204 Steiner points inside domain: 242 Done meshing using TetGen! Writing VTK file: volume.vtk.... Finished writing VTK file Writing exodus file .... Block: 'tableTop_tet', blk_id 1, num_entries 1722 Block: 'leg0_tet', blk_id 2, num_entries 4460 Block: 'leg1_tet', blk_id 3, num_entries 4436 Block: 'leg2_tet', blk_id 4, num_entries 4459 Block: 'leg3_tet', blk_id 5, num_entries 4414 Sideset: 'leg0Side', set_id 1, num_entries 2136 Sideset: 'leg1Side', set_id 2, num_entries 2136 Sideset: 'leg2Side', set_id 3, num_entries 2136 Sideset: 'leg3Side', set_id 4, num_entries 2136 Sideset: 'tableTopSide', set_id 5, num_entries 1280 Nodeset: 'edge', set_id 1, num_entries 17 Nodeset: 'face1', set_id 2, num_entries 99 Nodeset: 'face2', set_id 3, num_entries 99 Nodeset: 'node', set_id 4, num_entries 1 Finished writing Exodus file ==181564== ==181564== HEAP SUMMARY: ==181564== in use at exit: 4,231,709 bytes in 23,535 blocks ==181564== total heap usage: 676,321 allocs, 652,786 frees, 345,655,283 bytes allocated ==181564== ==181564== LEAK SUMMARY: ==181564== definitely lost: 0 bytes in 0 blocks ==181564== indirectly lost: 0 bytes in 0 blocks ==181564== possibly lost: 0 bytes in 0 blocks ==181564== still reachable: 0 bytes in 0 blocks ==181564== suppressed: 4,231,709 bytes in 23,535 blocks ==181564== ==181564== For lists of detected and suppressed errors, rerun with: -s ==181564== ERROR SUMMARY: 0 errors from 0 contexts (suppressed: 1409 from 1409) 104.41user 1.36system 1:45.78elapsed 99%CPU (0avgtext+0avgdata 351648maxresident)k 0inputs+11824outputs (0major+504540minor)pagefaults 0swaps real 1m45.790s user 1m44.419s sys 0m1.373s + status=0 + set +x ================================================= CAPS verification (using pyCAPS) case plato_tetgen_table_PyTest.py passed (as expected) ================================================= ================================================= + echo 'plato_tetgen_cyli_box_PyTest.py test;' + tee -a /jenkins/workspace/ESP_ValgrindCaps/7.6/CAPS/STRUCTURE/LINUX64/ESP/LINUX64/examples/regressionTest/pyCAPSlog.txt plato_tetgen_cyli_box_PyTest.py test; + time valgrind --tool=memcheck --error-exitcode=0 --leak-check=yes --show-leak-kinds=all --keep-debuginfo=yes --gen-suppressions=all --max-stackframe=4000000 --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.6/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-AFLR.supp --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.6/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-exodus.supp --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.6/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-IRIT.supp --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.6/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-MKL.supp --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.6/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-python.supp --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.6/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-Tblade3.supp --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.6/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-Ubuntu.supp --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.6/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-OCC7.6.supp python -u plato_tetgen_cyli_box_PyTest.py -outLevel=0 + tee -a /jenkins/workspace/ESP_ValgrindCaps/7.6/CAPS/STRUCTURE/LINUX64/ESP/LINUX64/examples/regressionTest/pyCAPSlog.txt ==212875== Memcheck, a memory error detector ==212875== Copyright (C) 2002-2017, and GNU GPL'd, by Julian Seward et al. ==212875== Using Valgrind-3.18.1 and LibVEX; rerun with -h for copyright info ==212875== Command: python -u plato_tetgen_cyli_box_PyTest.py -outLevel=0 ==212875== EGADS Warning: Loop 2 marked with -1 EGADS Warning: Loop 2 marked with -1 Mapping capsGroup attributes ................ Number of unique capsGroup attributes = 5 Name = box, index = 1 Name = cyl2, index = 2 Name = box;cyl2, index = 3 Name = cyl1, index = 4 Name = cyl1;box;cyl2, index = 5 Mapping capsMesh attributes ................ Number of unique capsMesh attributes = 0 Getting surface mesh for body 1 (of 1) Body 1 (of 1) Number of nodes = 3603 Number of elements = 7330 Number of node elements = 0 Number of line elements = 0 Number of triangle elements = 7330 Number of quadrilateral elements = 0 ---------------------------- Total number of nodes = 3603 Total number of elements = 7330 Mapping capsGroup attributes ................ Number of unique capsGroup attributes = 5 Name = box, index = 1 Name = cyl2, index = 2 Name = box;cyl2, index = 3 Name = cyl1, index = 4 Name = cyl1;box;cyl2, index = 5 Number of surface: nodes - 3603, elements - 7330 Getting volume mesh Generating volume mesh using TetGen..... Tetgen input string = pYq1.500/0.000T1.00e-16A Delaunizing vertices... Delaunay seconds: 9.18659 Creating surface mesh ... Surface mesh seconds: 0.206275 Recovering boundaries... Boundary recovery seconds: 1.24575 Removing exterior tetrahedra ... Warning: The 3-th region point lies outside the convex hull. Spreading region attributes. Exterior tets removal seconds: 0.077755 Recovering Delaunayness... Delaunay recovery seconds: 8.3458 Refining mesh... Refinement seconds: 12.9325 Smoothing vertices... Mesh smoothing seconds: 15.8114 Improving mesh... Mesh improvement seconds: 0.404595 Writing nodes. Writing elements. Writing faces. Writing edges. Output seconds: 0.044008 Total running seconds: 48.2623 Statistics: Input points: 3603 Input facets: 7330 Input segments: 10931 Input holes: 0 Input regions: 3 Mesh points: 5634 Mesh tetrahedra: 29520 Mesh faces: 60657 Mesh faces on exterior boundary: 3234 Mesh faces on input facets: 7330 Mesh edges on input segments: 10931 Steiner points inside domain: 2031 Done meshing using TetGen! Writing VTK file: volume.vtk.... Finished writing VTK file Writing exodus file .... Block: 'c_tet', blk_id 1, num_entries 12838 Block: 'b_tet', blk_id 2, num_entries 11116 Block: 'a_tet', blk_id 3, num_entries 5566 Sideset: 'box', set_id 1, num_entries 3234 Sideset: 'cyl1', set_id 2, num_entries 2120 Sideset: 'cyl2', set_id 3, num_entries 2314 Finished writing Exodus file ==212875== ==212875== HEAP SUMMARY: ==212875== in use at exit: 4,231,965 bytes in 23,535 blocks ==212875== total heap usage: 1,071,915 allocs, 1,048,380 frees, 422,562,784 bytes allocated ==212875== ==212875== LEAK SUMMARY: ==212875== definitely lost: 0 bytes in 0 blocks ==212875== indirectly lost: 0 bytes in 0 blocks ==212875== possibly lost: 0 bytes in 0 blocks ==212875== still reachable: 0 bytes in 0 blocks ==212875== suppressed: 4,231,965 bytes in 23,535 blocks ==212875== ==212875== For lists of detected and suppressed errors, rerun with: -s ==212875== ERROR SUMMARY: 0 errors from 0 contexts (suppressed: 1409 from 1409) 123.89user 2.06system 2:05.97elapsed 99%CPU (0avgtext+0avgdata 440096maxresident)k 0inputs+11624outputs (0major+748254minor)pagefaults 0swaps real 2m5.983s user 2m3.898s sys 0m2.071s + status=0 + set +x ================================================= CAPS verification (using pyCAPS) case plato_tetgen_cyli_box_PyTest.py passed (as expected) ================================================= ================================================= + echo 'plato_aflr_tetgen_table_PyTest.py test;' + tee -a /jenkins/workspace/ESP_ValgrindCaps/7.6/CAPS/STRUCTURE/LINUX64/ESP/LINUX64/examples/regressionTest/pyCAPSlog.txt plato_aflr_tetgen_table_PyTest.py test; + time valgrind --tool=memcheck --error-exitcode=0 --leak-check=yes --show-leak-kinds=all --keep-debuginfo=yes --gen-suppressions=all --max-stackframe=4000000 --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.6/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-AFLR.supp --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.6/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-exodus.supp --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.6/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-IRIT.supp --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.6/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-MKL.supp --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.6/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-python.supp --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.6/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-Tblade3.supp --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.6/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-Ubuntu.supp --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.6/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-OCC7.6.supp python -u plato_aflr_tetgen_table_PyTest.py -outLevel=0 + tee -a /jenkins/workspace/ESP_ValgrindCaps/7.6/CAPS/STRUCTURE/LINUX64/ESP/LINUX64/examples/regressionTest/pyCAPSlog.txt ==228892== Memcheck, a memory error detector ==228892== Copyright (C) 2002-2017, and GNU GPL'd, by Julian Seward et al. ==228892== Using Valgrind-3.18.1 and LibVEX; rerun with -h for copyright info ==228892== Command: python -u plato_aflr_tetgen_table_PyTest.py -outLevel=0 ==228892== Mapping capsGroup attributes ................ Number of unique capsGroup attributes = 5 Name = tableTopSide, index = 1 Name = leg0Side, index = 2 Name = leg1Side, index = 3 Name = leg2Side, index = 4 Name = leg3Side, index = 5 Mapping capsMesh attributes ................ Number of unique capsMesh attributes = 0 AFLR2 : --------------------------------------- AFLR2 : AFLR2 LIBRARY AFLR2 : ADVANCING-FRONT/LOCAL-RECONNECTION AFLR2 : TRIA/QUAD GRID GENERATOR AFLR2 : Version Number 9.14.7 AFLR2 : Version Date 07/16/23 @ 01:42PM AFLR2 : Compile OS Linux 3.10.0-1160.88.1.el7.x86_64 x86_64 AFLR2 : Compile Date 07/25/23 @ 11:58AM AFLR2 : Copyright 1994-2021, D.L. Marcum AFLR2 : --------------------------------------- AFLR4 : --------------------------------------- AFLR4 : AFLR4 LIBRARY AFLR4 : ADVANCING-FRONT/LOCAL-RECONNECTION AFLR4 : TRIA/QUAD SURFACE GRID GENERATOR AFLR4 : Version Number 11.5.9 AFLR4 : Version Date 08/14/23 @ 12:27AM AFLR4 : Compile OS Linux 3.10.0-1160.88.1.el7.x86_64 x86_64 AFLR4 : Compile Date 08/14/23 @ 01:20PM AFLR4 : Copyright 1994-2021, D.L. Marcum AFLR4 : --------------------------------------- EGADS : --------------------------------------- EGADS : Engineering Geometry Aircraft Design System EGADS : Version 1.25 EGADS : OpenCASCADE Version 7.6.0 EGADS : --------------------------------------- EGADS : EGADS CAD Geometry Setup EGADS : Model has 5 Active Bodies EGADS : Body 0 is a SolidBody EGADS : Body 0 has 1 Shells EGADS : Body 0 has 6 Faces EGADS : Body 0 has 12 Edges EGADS : Body 0 has 6 Loops EGADS : Body 0 has 8 Nodes EGADS : Body 1 is a SolidBody EGADS : Body 1 has 1 Shells EGADS : Body 1 has 4 Faces EGADS : Body 1 has 6 Edges EGADS : Body 1 has 4 Loops EGADS : Body 1 has 4 Nodes EGADS : Body 2 is a SolidBody EGADS : Body 2 has 1 Shells EGADS : Body 2 has 4 Faces EGADS : Body 2 has 6 Edges EGADS : Body 2 has 4 Loops EGADS : Body 2 has 4 Nodes EGADS : Body 3 is a SolidBody EGADS : Body 3 has 1 Shells EGADS : Body 3 has 4 Faces EGADS : Body 3 has 6 Edges EGADS : Body 3 has 4 Loops EGADS : Body 3 has 4 Nodes EGADS : Body 4 is a SolidBody EGADS : Body 4 has 1 Shells EGADS : Body 4 has 4 Faces EGADS : Body 4 has 6 Edges EGADS : Body 4 has 4 Loops EGADS : Body 4 has 4 Nodes EGADS : Check Grid BCs EGADS : Grid BCs are OK EGADS : Face Neighbor-Faces Information EGADS : QC = Face Quad Combination Flag EGADS : IER = Face Isolated Edge Refinement Flag EGADS : ER = Face Edge Refinement Factor EGADS : Not applicable for Faces with a FarField Grid BC. EGADS : SF = Face Scale Factor EGADS : Not applicable for Faces with a FarField Grid BC. EGADS : Face Body QC IER ER Scale Neighbor EGADS : ID Active ID Flag Flag Weight Factor Faces EGADS : 1 Yes 0 0 1 0 1 3 4 5 6 EGADS : 2 Yes 0 0 1 0 1 3 4 5 6 EGADS : 3 Yes 0 0 1 0 1 1 2 5 6 EGADS : 4 Yes 0 0 1 0 1 1 2 5 6 EGADS : 5 Yes 0 0 1 0 1 1 2 3 4 EGADS : 6 Yes 0 0 1 0 1 1 2 3 4 EGADS : 7 Yes 1 0 1 0 1 8 9 10 EGADS : 8 Yes 1 0 1 0 1 7 9 10 EGADS : 9 Yes 1 0 1 0 1 7 8 EGADS : 10 Yes 1 0 1 0 1 7 8 EGADS : 11 Yes 2 0 1 0 1 12 13 14 EGADS : 12 Yes 2 0 1 0 1 11 13 14 EGADS : 13 Yes 2 0 1 0 1 11 12 EGADS : 14 Yes 2 0 1 0 1 11 12 EGADS : 15 Yes 3 0 1 0 1 16 17 18 EGADS : 16 Yes 3 0 1 0 1 15 17 18 EGADS : 17 Yes 3 0 1 0 1 15 16 EGADS : 18 Yes 3 0 1 0 1 15 16 EGADS : 19 Yes 4 0 1 0 1 20 21 22 EGADS : 20 Yes 4 0 1 0 1 19 21 22 EGADS : 21 Yes 4 0 1 0 1 19 20 EGADS : 22 Yes 4 0 1 0 1 19 20 EGADS : Face Edges Information EGADS : Face Edges EGADS : 1 1 2 -3 -4 EGADS : 2 -5 8 7 -6 EGADS : 3 9 5 -10 -1 EGADS : 4 -11 3 12 -7 EGADS : 5 4 11 -8 -9 EGADS : 6 -2 10 6 -12 EGADS : 7 -13 -14 15 16 EGADS : 8 17 14 -18 -16 EGADS : 9 13 18 EGADS : 10 -15 -17 EGADS : 11 -19 -20 21 22 EGADS : 12 23 20 -24 -22 EGADS : 13 19 24 EGADS : 14 -21 -23 EGADS : 15 -25 -26 27 28 EGADS : 16 29 26 -30 -28 EGADS : 17 25 30 EGADS : 18 -27 -29 EGADS : 19 -31 -32 33 34 EGADS : 20 35 32 -36 -34 EGADS : 21 31 36 EGADS : 22 -33 -35 EGADS : Face Loops Information EGADS : Face Loops EGADS : 1 1 EGADS : 2 2 EGADS : 3 3 EGADS : 4 4 EGADS : 5 5 EGADS : 6 6 EGADS : 7 7 EGADS : 8 8 EGADS : 9 9 EGADS : 10 10 EGADS : 11 11 EGADS : 12 12 EGADS : 13 13 EGADS : 14 14 EGADS : 15 15 EGADS : 16 16 EGADS : 17 17 EGADS : 18 18 EGADS : 19 19 EGADS : 20 20 EGADS : 21 21 EGADS : 22 22 EGADS : Loop Edges Information EGADS : Loop Active Sense Edges EGADS : 1 Yes 1 1 2 -3 -4 EGADS : 2 Yes 1 -5 8 7 -6 EGADS : 3 Yes 1 9 5 -10 -1 EGADS : 4 Yes 1 -11 3 12 -7 EGADS : 5 Yes 1 4 11 -8 -9 EGADS : 6 Yes 1 -2 10 6 -12 EGADS : 7 Yes 1 -13 -14 15 16 EGADS : 8 Yes 1 17 14 -18 -16 EGADS : 9 Yes 1 13 18 EGADS : 10 Yes 1 -15 -17 EGADS : 11 Yes 1 -19 -20 21 22 EGADS : 12 Yes 1 23 20 -24 -22 EGADS : 13 Yes 1 19 24 EGADS : 14 Yes 1 -21 -23 EGADS : 15 Yes 1 -25 -26 27 28 EGADS : 16 Yes 1 29 26 -30 -28 EGADS : 17 Yes 1 25 30 EGADS : 18 Yes 1 -27 -29 EGADS : 19 Yes 1 -31 -32 33 34 EGADS : 20 Yes 1 35 32 -36 -34 EGADS : 21 Yes 1 31 36 EGADS : 22 Yes 1 -33 -35 EGADS : Edge Node, Scale Factor, and Neighbor-Faces Information EGADS : ESF = Edge Scale Factor EGADS : Not applicable for DEGENERATE Edges or Edges with a FarField EGADS : Grid BC Neighbor Face. EGADS : Neighbor EGADS : Edge Body Active Node1 Node2 ESF Faces EGADS : 1 0 Yes 2 1 1 1 3 EGADS : 2 0 Yes 1 3 1 1 6 EGADS : 3 0 Yes 4 3 1 1 4 EGADS : 4 0 Yes 2 4 1 1 5 EGADS : 5 0 Yes 6 5 1 2 3 EGADS : 6 0 Yes 5 7 1 2 6 EGADS : 7 0 Yes 8 7 1 2 4 EGADS : 8 0 Yes 6 8 1 2 5 EGADS : 9 0 Yes 2 6 1 3 5 EGADS : 10 0 Yes 1 5 1 3 6 EGADS : 11 0 Yes 4 8 1 4 5 EGADS : 12 0 Yes 3 7 1 4 6 EGADS : 13 1 Yes 10 9 1 7 9 EGADS : 14 1 Yes 11 10 1 7 8 EGADS : 15 1 Yes 11 12 1 7 10 EGADS : 16 1 Yes 12 9 1 7 8 EGADS : 17 1 Yes 12 11 1 8 10 EGADS : 18 1 Yes 9 10 1 8 9 EGADS : 19 2 Yes 14 13 1 11 13 EGADS : 20 2 Yes 15 14 1 11 12 EGADS : 21 2 Yes 15 16 1 11 14 EGADS : 22 2 Yes 16 13 1 11 12 EGADS : 23 2 Yes 16 15 1 12 14 EGADS : 24 2 Yes 13 14 1 12 13 EGADS : 25 3 Yes 18 17 1 15 17 EGADS : 26 3 Yes 19 18 1 15 16 EGADS : 27 3 Yes 19 20 1 15 18 EGADS : 28 3 Yes 20 17 1 15 16 EGADS : 29 3 Yes 20 19 1 16 18 EGADS : 30 3 Yes 17 18 1 16 17 EGADS : 31 4 Yes 22 21 1 19 21 EGADS : 32 4 Yes 23 22 1 19 20 EGADS : 33 4 Yes 23 24 1 19 22 EGADS : 34 4 Yes 24 21 1 19 20 EGADS : 35 4 Yes 24 23 1 20 22 EGADS : 36 4 Yes 21 22 1 20 21 EGADS : Node Information EGADS : Node Active Coordinates EGADS : 1 Yes 0 0 0.5 EGADS : 2 Yes 0 0 0 EGADS : 3 Yes 0 0.1 0.5 EGADS : 4 Yes 0 0.1 0 EGADS : 5 Yes 0.5 0 0.5 EGADS : 6 Yes 0.5 0 0 EGADS : 7 Yes 0.5 0.1 0.5 EGADS : 8 Yes 0.5 0.1 0 EGADS : 9 Yes 0 0 0 EGADS : 10 Yes 0 0 0 EGADS : 11 Yes 0 0 0 EGADS : 12 Yes 0 0 0 EGADS : 13 Yes 0 0 0.26 EGADS : 14 Yes 0 0 0.46 EGADS : 15 Yes 0 0 0.46 EGADS : 16 Yes 0 0 0.26 EGADS : 17 Yes 0.36 0 0.26 EGADS : 18 Yes 0.36 0 0.46 EGADS : 19 Yes 0.36 0 0.46 EGADS : 20 Yes 0.36 0 0.26 EGADS : 21 Yes 0.36 0 0 EGADS : 22 Yes 0.36 0 0 EGADS : 23 Yes 0.36 0 0 EGADS : 24 Yes 0.36 0 0 EGADS : Face and Edge Match Information EGADS : No Face Matches Found AFLR4 : Surface Mesh Spacing Setup AFLR4 : Max Bounding Box Length = 1 AFLR4 : Min Bounding Box Length = 0.7 AFLR4 : Max Ref Bounding Box Length = 1 AFLR4 : Min Ref Bounding Box Length = 0.7 AFLR4 : Reference Length = 1 AFLR4 : BL Thickness = 0 AFLR4 : Abs Min Surf Spacing = 0.0025 AFLR4 : Min Surf Spacing = 0.005 AFLR4 : Max Surf Spacing = 0.1 AFLR4 : Global Scale Factor = 1 AFLR4 : Geometry Definition Information AFLR4 : Definition Definition Composite Grid BC AFLR4 : ID Type ID Type AFLR4 : 0 glue-only composite - - AFLR4 : 1 CAD geometry 0 STD w/BL AFLR4 : 2 CAD geometry 0 STD w/BL AFLR4 : 3 CAD geometry 0 STD w/BL AFLR4 : 4 CAD geometry 0 STD w/BL AFLR4 : 5 CAD geometry 0 STD w/BL AFLR4 : 6 CAD geometry 0 STD w/BL AFLR4 : 7 CAD geometry 0 STD w/BL AFLR4 : 8 CAD geometry 0 STD w/BL AFLR4 : 9 CAD geometry 0 STD w/BL AFLR4 : 10 CAD geometry 0 STD w/BL AFLR4 : 11 CAD geometry 0 STD w/BL AFLR4 : 12 CAD geometry 0 STD w/BL AFLR4 : 13 CAD geometry 0 STD w/BL AFLR4 : 14 CAD geometry 0 STD w/BL AFLR4 : 15 CAD geometry 0 STD w/BL AFLR4 : 16 CAD geometry 0 STD w/BL AFLR4 : 17 CAD geometry 0 STD w/BL AFLR4 : 18 CAD geometry 0 STD w/BL AFLR4 : 19 CAD geometry 0 STD w/BL AFLR4 : 20 CAD geometry 0 STD w/BL AFLR4 : 21 CAD geometry 0 STD w/BL AFLR4 : 22 CAD geometry 0 STD w/BL AFLR4 : Case has 5 Proximity Checking Components AFLR4 : Component 1 includes Definitions 1 2 3 4 5 6 AFLR4 : Component 2 includes Definitions 7 8 9 10 AFLR4 : Component 3 includes Definitions 11 12 13 14 AFLR4 : Component 4 includes Definitions 15 16 17 18 AFLR4 : Component 5 includes Definitions 19 20 21 22 AFLR4 : Define CAD surface definition 1 AFLR4 : Define CAD surface definition 2 AFLR4 : Define CAD surface definition 3 AFLR4 : Define CAD surface definition 4 AFLR4 : Define CAD surface definition 5 AFLR4 : Define CAD surface definition 6 AFLR4 : Define CAD surface definition 7 AFLR4 : Define CAD surface definition 8 AFLR4 : Define CAD surface definition 9 AFLR4 : Define CAD surface definition 10 AFLR4 : Define CAD surface definition 11 AFLR4 : Define CAD surface definition 12 AFLR4 : Define CAD surface definition 13 AFLR4 : Define CAD surface definition 14 AFLR4 : Define CAD surface definition 15 AFLR4 : Define CAD surface definition 16 AFLR4 : Define CAD surface definition 17 AFLR4 : Define CAD surface definition 18 AFLR4 : Define CAD surface definition 19 AFLR4 : Define CAD surface definition 20 AFLR4 : Define CAD surface definition 21 AFLR4 : Define CAD surface definition 22 AFLR4 : Surface Grid Generation AFLR4 : Generate optimal mesh on surface definition 1 AFLR2 : Nodes, Trias,Quads= 49 64 0 AFLR4 : Nodes, Trias,Quads= 34 34 0 AFLR4 : Generate optimal mesh on surface definition 2 AFLR2 : Nodes, Trias,Quads= 49 64 0 AFLR4 : Nodes, Trias,Quads= 34 34 0 AFLR4 : Generate optimal mesh on surface definition 3 AFLR2 : Nodes, Trias,Quads= 229 400 0 AFLR4 : Nodes, Trias,Quads= 212 366 0 AFLR4 : Generate optimal mesh on surface definition 4 AFLR2 : Nodes, Trias,Quads= 230 402 0 AFLR4 : Nodes, Trias,Quads= 212 366 0 AFLR4 : Generate optimal mesh on surface definition 5 AFLR2 : Nodes, Trias,Quads= 49 64 0 AFLR4 : Nodes, Trias,Quads= 34 34 0 AFLR4 : Generate optimal mesh on surface definition 6 AFLR2 : Nodes, Trias,Quads= 49 64 0 AFLR4 : Nodes, Trias,Quads= 34 34 0 AFLR4 : Generate optimal mesh on surface definition 7 AFLR2 : Nodes, Trias,Quads= 2270 4354 0 AFLR4 : Nodes, Trias,Quads= 2258 4330 0 AFLR4 : Generate optimal mesh on surface definition 8 AFLR2 : Nodes, Trias,Quads= 2270 4354 0 AFLR4 : Nodes, Trias,Quads= 2259 4332 0 AFLR4 : Generate optimal mesh on surface definition 9 AFLR2 : Nodes, Trias,Quads= 515 964 0 AFLR4 : Nodes, Trias,Quads= 413 760 0 AFLR4 : Generate optimal mesh on surface definition 10 AFLR2 : Nodes, Trias,Quads= 504 942 0 AFLR4 : Nodes, Trias,Quads= 402 738 0 AFLR4 : Generate optimal mesh on surface definition 11 AFLR2 : Nodes, Trias,Quads= 2270 4354 0 AFLR4 : Nodes, Trias,Quads= 2258 4330 0 AFLR4 : Generate optimal mesh on surface definition 12 AFLR2 : Nodes, Trias,Quads= 2270 4354 0 AFLR4 : Nodes, Trias,Quads= 2259 4332 0 AFLR4 : Generate optimal mesh on surface definition 13 AFLR2 : Nodes, Trias,Quads= 515 964 0 AFLR4 : Nodes, Trias,Quads= 413 760 0 AFLR4 : Generate optimal mesh on surface definition 14 AFLR2 : Nodes, Trias,Quads= 504 942 0 AFLR4 : Nodes, Trias,Quads= 402 738 0 AFLR4 : Generate optimal mesh on surface definition 15 AFLR2 : Nodes, Trias,Quads= 2270 4354 0 AFLR4 : Nodes, Trias,Quads= 2258 4330 0 AFLR4 : Generate optimal mesh on surface definition 16 AFLR2 : Nodes, Trias,Quads= 2270 4354 0 AFLR4 : Nodes, Trias,Quads= 2259 4332 0 AFLR4 : Generate optimal mesh on surface definition 17 AFLR2 : Nodes, Trias,Quads= 515 964 0 AFLR4 : Nodes, Trias,Quads= 413 760 0 AFLR4 : Generate optimal mesh on surface definition 18 AFLR2 : Nodes, Trias,Quads= 504 942 0 AFLR4 : Nodes, Trias,Quads= 402 738 0 AFLR4 : Generate optimal mesh on surface definition 19 AFLR2 : Nodes, Trias,Quads= 2270 4354 0 AFLR4 : Nodes, Trias,Quads= 2258 4330 0 AFLR4 : Generate optimal mesh on surface definition 20 AFLR2 : Nodes, Trias,Quads= 2270 4354 0 AFLR4 : Nodes, Trias,Quads= 2259 4332 0 AFLR4 : Generate optimal mesh on surface definition 21 AFLR2 : Nodes, Trias,Quads= 515 964 0 AFLR4 : Nodes, Trias,Quads= 413 760 0 AFLR4 : Generate optimal mesh on surface definition 22 AFLR2 : Nodes, Trias,Quads= 504 942 0 AFLR4 : Nodes, Trias,Quads= 402 738 0 DGEOM : Add surface definitions to composite definition 0 DGEOM : Glue composite surface definition 0 DGEOM : Nodes,Faces,BEdges= 20764 41508 2224 AFLR4 : Curvature BG Surface Grid Generation AFLR4 : Nodes, Faces = 20764 41508 AFLR4 : Surface Grid Generation AFLR4 : Generate optimal mesh on surface definition 1 AFLR2 : Nodes, Trias,Quads= 46 60 0 AFLR4 : Nodes, Trias,Quads= 30 28 0 AFLR4 : Generate optimal mesh on surface definition 2 AFLR2 : Nodes, Trias,Quads= 46 60 0 AFLR4 : Nodes, Trias,Quads= 30 28 0 AFLR4 : Generate optimal mesh on surface definition 3 AFLR2 : Nodes, Trias,Quads= 201 348 0 AFLR4 : Nodes, Trias,Quads= 193 332 0 AFLR4 : Generate optimal mesh on surface definition 4 AFLR2 : Nodes, Trias,Quads= 204 354 0 AFLR4 : Nodes, Trias,Quads= 193 332 0 AFLR4 : Generate optimal mesh on surface definition 5 AFLR2 : Nodes, Trias,Quads= 46 60 0 AFLR4 : Nodes, Trias,Quads= 30 28 0 AFLR4 : Generate optimal mesh on surface definition 6 AFLR2 : Nodes, Trias,Quads= 46 60 0 AFLR4 : Nodes, Trias,Quads= 30 28 0 AFLR4 : Generate optimal mesh on surface definition 7 AFLR2 : Nodes, Trias,Quads= 2245 4304 0 AFLR4 : Nodes, Trias,Quads= 2244 4302 0 AFLR4 : Generate optimal mesh on surface definition 8 AFLR2 : Nodes, Trias,Quads= 2248 4310 0 AFLR4 : Nodes, Trias,Quads= 2248 4310 0 AFLR4 : Generate optimal mesh on surface definition 9 AFLR2 : Nodes, Trias,Quads= 496 926 0 AFLR4 : Nodes, Trias,Quads= 416 766 0 AFLR4 : Generate optimal mesh on surface definition 10 AFLR2 : Nodes, Trias,Quads= 502 938 0 AFLR4 : Nodes, Trias,Quads= 408 750 0 AFLR4 : Generate optimal mesh on surface definition 11 AFLR2 : Nodes, Trias,Quads= 2245 4304 0 AFLR4 : Nodes, Trias,Quads= 2243 4300 0 AFLR4 : Generate optimal mesh on surface definition 12 AFLR2 : Nodes, Trias,Quads= 2248 4310 0 AFLR4 : Nodes, Trias,Quads= 2249 4312 0 AFLR4 : Generate optimal mesh on surface definition 13 AFLR2 : Nodes, Trias,Quads= 496 926 0 AFLR4 : Nodes, Trias,Quads= 416 766 0 AFLR4 : Generate optimal mesh on surface definition 14 AFLR2 : Nodes, Trias,Quads= 502 938 0 AFLR4 : Nodes, Trias,Quads= 408 750 0 AFLR4 : Generate optimal mesh on surface definition 15 AFLR2 : Nodes, Trias,Quads= 2245 4304 0 AFLR4 : Nodes, Trias,Quads= 2244 4302 0 AFLR4 : Generate optimal mesh on surface definition 16 AFLR2 : Nodes, Trias,Quads= 2248 4310 0 AFLR4 : Nodes, Trias,Quads= 2249 4312 0 AFLR4 : Generate optimal mesh on surface definition 17 AFLR2 : Nodes, Trias,Quads= 496 926 0 AFLR4 : Nodes, Trias,Quads= 416 766 0 AFLR4 : Generate optimal mesh on surface definition 18 AFLR2 : Nodes, Trias,Quads= 502 938 0 AFLR4 : Nodes, Trias,Quads= 408 750 0 AFLR4 : Generate optimal mesh on surface definition 19 AFLR2 : Nodes, Trias,Quads= 2245 4304 0 AFLR4 : Nodes, Trias,Quads= 2244 4302 0 AFLR4 : Generate optimal mesh on surface definition 20 AFLR2 : Nodes, Trias,Quads= 2248 4310 0 AFLR4 : Nodes, Trias,Quads= 2246 4306 0 AFLR4 : Generate optimal mesh on surface definition 21 AFLR2 : Nodes, Trias,Quads= 496 926 0 AFLR4 : Nodes, Trias,Quads= 416 766 0 AFLR4 : Generate optimal mesh on surface definition 22 AFLR2 : Nodes, Trias,Quads= 502 938 0 AFLR4 : Nodes, Trias,Quads= 408 750 0 DGEOM : Add surface definitions to composite definition 0 DGEOM : Glue composite surface definition 0 DGEOM : Nodes,Faces,BEdges= 20653 41286 2208 AFLR4 : Proximity BG Surface Grid Generation AFLR4 : Nodes, Trias = 21566 43112 AFLR4 : Nodes, Trias = 22450 44880 AFLR4 : Nodes, Trias = 22542 45064 AFLR4 : Surface Grid Generation AFLR4 : Generate optimal mesh on surface definition 1 AFLR2 : Nodes, Trias,Quads= 311 517 0 AFLR4 : Nodes, Trias,Quads= 309 513 0 AFLR4 : Generate optimal mesh on surface definition 2 AFLR2 : Nodes, Trias,Quads= 313 521 0 AFLR4 : Nodes, Trias,Quads= 309 513 0 AFLR4 : Generate optimal mesh on surface definition 3 AFLR2 : Nodes, Trias,Quads= 3277 6339 0 AFLR4 : Nodes, Trias,Quads= 1431 2647 0 AFLR4 : Generate optimal mesh on surface definition 4 AFLR2 : Nodes, Trias,Quads= 1864 3566 0 AFLR4 : Nodes, Trias,Quads= 1736 3310 0 AFLR4 : Generate optimal mesh on surface definition 5 AFLR2 : Nodes, Trias,Quads= 315 525 0 AFLR4 : Nodes, Trias,Quads= 307 509 0 AFLR4 : Generate optimal mesh on surface definition 6 AFLR2 : Nodes, Trias,Quads= 318 530 0 AFLR4 : Nodes, Trias,Quads= 314 522 0 AFLR4 : Generate optimal mesh on surface definition 7 AFLR2 : Nodes, Trias,Quads= 2301 4412 0 AFLR4 : Nodes, Trias,Quads= 2272 4354 0 AFLR4 : Generate optimal mesh on surface definition 8 AFLR2 : Nodes, Trias,Quads= 2302 4414 0 AFLR4 : Nodes, Trias,Quads= 2275 4360 0 AFLR4 : Generate optimal mesh on surface definition 9 AFLR2 : Nodes, Trias,Quads= 548 1028 0 AFLR4 : Nodes, Trias,Quads= 423 778 0 AFLR4 : Generate optimal mesh on surface definition 10 AFLR2 : Nodes, Trias,Quads= 549 1030 0 AFLR4 : Nodes, Trias,Quads= 418 768 0 AFLR4 : Generate optimal mesh on surface definition 11 AFLR2 : Nodes, Trias,Quads= 2301 4412 0 AFLR4 : Nodes, Trias,Quads= 2272 4354 0 AFLR4 : Generate optimal mesh on surface definition 12 AFLR2 : Nodes, Trias,Quads= 2302 4414 0 AFLR4 : Nodes, Trias,Quads= 2276 4362 0 AFLR4 : Generate optimal mesh on surface definition 13 AFLR2 : Nodes, Trias,Quads= 548 1028 0 AFLR4 : Nodes, Trias,Quads= 423 778 0 AFLR4 : Generate optimal mesh on surface definition 14 AFLR2 : Nodes, Trias,Quads= 549 1030 0 AFLR4 : Nodes, Trias,Quads= 418 768 0 AFLR4 : Generate optimal mesh on surface definition 15 AFLR2 : Nodes, Trias,Quads= 2301 4412 0 AFLR4 : Nodes, Trias,Quads= 2272 4354 0 AFLR4 : Generate optimal mesh on surface definition 16 AFLR2 : Nodes, Trias,Quads= 2302 4414 0 AFLR4 : Nodes, Trias,Quads= 2275 4360 0 AFLR4 : Generate optimal mesh on surface definition 17 AFLR2 : Nodes, Trias,Quads= 548 1028 0 AFLR4 : Nodes, Trias,Quads= 423 778 0 AFLR4 : Generate optimal mesh on surface definition 18 AFLR2 : Nodes, Trias,Quads= 549 1030 0 AFLR4 : Nodes, Trias,Quads= 418 768 0 AFLR4 : Generate optimal mesh on surface definition 19 AFLR2 : Nodes, Trias,Quads= 2301 4412 0 AFLR4 : Nodes, Trias,Quads= 2271 4352 0 AFLR4 : Generate optimal mesh on surface definition 20 AFLR2 : Nodes, Trias,Quads= 2302 4414 0 AFLR4 : Nodes, Trias,Quads= 2274 4358 0 AFLR4 : Generate optimal mesh on surface definition 21 AFLR2 : Nodes, Trias,Quads= 548 1028 0 AFLR4 : Nodes, Trias,Quads= 423 778 0 AFLR4 : Generate optimal mesh on surface definition 22 AFLR2 : Nodes, Trias,Quads= 549 1030 0 AFLR4 : Nodes, Trias,Quads= 418 768 0 DGEOM : Add surface definitions to composite definition 0 DGEOM : Glue composite surface definition 0 DGEOM : Nodes,Faces,BEdges= 24536 49052 2818 OVERALL : CPU Time = 35.827 seconds Body 1 (of 5) Number of nodes = 4009 Number of elements = 8014 Number of node elements = 0 Number of line elements = 0 Number of triangle elements = 8014 Number of quadrilateral elements = 0 Body 2 (of 5) Number of nodes = 5132 Number of elements = 10260 Number of node elements = 0 Number of line elements = 0 Number of triangle elements = 10260 Number of quadrilateral elements = 0 Body 3 (of 5) Number of nodes = 5133 Number of elements = 10262 Number of node elements = 0 Number of line elements = 0 Number of triangle elements = 10262 Number of quadrilateral elements = 0 Body 4 (of 5) Number of nodes = 5132 Number of elements = 10260 Number of node elements = 0 Number of line elements = 0 Number of triangle elements = 10260 Number of quadrilateral elements = 0 Body 5 (of 5) Number of nodes = 5130 Number of elements = 10256 Number of node elements = 0 Number of line elements = 0 Number of triangle elements = 10256 Number of quadrilateral elements = 0 ---------------------------- Total number of nodes = 24536 Total number of elements = 49052 Mapping capsGroup attributes ................ Number of unique capsGroup attributes = 5 Name = tableTopSide, index = 1 Name = leg0Side, index = 2 Name = leg1Side, index = 3 Name = leg2Side, index = 4 Name = leg3Side, index = 5 Body 1 number of surface: nodes - 4009, elements - 8014 Body 2 number of surface: nodes - 5132, elements - 10260 Body 3 number of surface: nodes - 5133, elements - 10262 Body 4 number of surface: nodes - 5132, elements - 10260 Body 5 number of surface: nodes - 5130, elements - 10256 Getting volume mesh Generating volume mesh using TetGen..... Tetgen input string = pYq1.500/0.000T1.00e-16A Delaunizing vertices... Delaunay seconds: 1.77179 Creating surface mesh ... Surface mesh seconds: 0.206395 Recovering boundaries... Boundary recovery seconds: 0.643852 Removing exterior tetrahedra ... Spreading region attributes. Exterior tets removal seconds: 0.073764 Recovering Delaunayness... Delaunay recovery seconds: 0.253429 Refining mesh... Refinement seconds: 1.31792 Smoothing vertices... Mesh smoothing seconds: 2.07839 Improving mesh... Mesh improvement seconds: 0.168736 Writing nodes. Writing elements. Writing faces. Writing edges. Output seconds: 0.035087 Total running seconds: 6.55622 Statistics: Input points: 4009 Input facets: 8014 Input segments: 12021 Input holes: 0 Input regions: 1 Mesh points: 4773 Mesh tetrahedra: 15871 Mesh faces: 35749 Mesh faces on exterior boundary: 8014 Mesh faces on input facets: 8014 Mesh edges on input segments: 12021 Steiner points inside domain: 764 Generating volume mesh using TetGen..... Tetgen input string = pYq1.500/0.000T1.00e-16A Delaunizing vertices... Delaunay seconds: 1.59656 Creating surface mesh ... Surface mesh seconds: 0.178188 Recovering boundaries... Boundary recovery seconds: 0.540279 Removing exterior tetrahedra ... Warning: The 1-th region point lies outside the convex hull. Spreading region attributes. Exterior tets removal seconds: 0.181061 Recovering Delaunayness... Delaunay recovery seconds: 0.488734 Refining mesh... Refinement seconds: 2.47506 Smoothing vertices... Mesh smoothing seconds: 2.84125 Improving mesh... Mesh improvement seconds: 0.215319 Writing nodes. Writing elements. Writing faces. Writing edges. Output seconds: 0.052349 Total running seconds: 8.57273 Statistics: Input points: 5132 Input facets: 10260 Input segments: 15390 Input holes: 0 Input regions: 2 Mesh points: 6601 Mesh tetrahedra: 23352 Mesh faces: 51834 Mesh faces on exterior boundary: 10260 Mesh faces on input facets: 10260 Mesh edges on input segments: 15390 Steiner points inside domain: 1469 Generating volume mesh using TetGen..... Tetgen input string = pYq1.500/0.000T1.00e-16A Delaunizing vertices... Delaunay seconds: 2.67927 Creating surface mesh ... Surface mesh seconds: 0.305294 Recovering boundaries... Boundary recovery seconds: 0.928238 Removing exterior tetrahedra ... Warning: The 1-th region point lies outside the convex hull. Warning: The 2-th region point lies outside the convex hull. Spreading region attributes. Exterior tets removal seconds: 0.331436 Recovering Delaunayness... Delaunay recovery seconds: 0.756137 Refining mesh... Refinement seconds: 4.27024 Smoothing vertices... Mesh smoothing seconds: 4.64967 Improving mesh... Mesh improvement seconds: 0.253968 Writing nodes. Writing elements. Writing faces. Writing edges. Output seconds: 0.052396 Total running seconds: 14.2335 Statistics: Input points: 5133 Input facets: 10262 Input segments: 15393 Input holes: 0 Input regions: 3 Mesh points: 6578 Mesh tetrahedra: 23237 Mesh faces: 51605 Mesh faces on exterior boundary: 10262 Mesh faces on input facets: 10262 Mesh edges on input segments: 15393 Steiner points inside domain: 1445 Generating volume mesh using TetGen..... Tetgen input string = pYq1.500/0.000T1.00e-16A Delaunizing vertices... Delaunay seconds: 1.60566 Creating surface mesh ... Surface mesh seconds: 0.177144 Recovering boundaries... Boundary recovery seconds: 0.559344 Removing exterior tetrahedra ... Warning: The 1-th region point lies outside the convex hull. Warning: The 2-th region point lies outside the convex hull. Warning: The 3-th region point lies outside the convex hull. Spreading region attributes. Exterior tets removal seconds: 0.189663 Recovering Delaunayness... Delaunay recovery seconds: 0.493662 Refining mesh... Refinement seconds: 2.50079 Smoothing vertices... Mesh smoothing seconds: 2.80139 Improving mesh... Mesh improvement seconds: 0.150894 Writing nodes. Writing elements. Writing faces. Writing edges. Output seconds: 0.029265 Total running seconds: 8.51159 Statistics: Input points: 5132 Input facets: 10260 Input segments: 15390 Input holes: 0 Input regions: 4 Mesh points: 6591 Mesh tetrahedra: 23307 Mesh faces: 51744 Mesh faces on exterior boundary: 10260 Mesh faces on input facets: 10260 Mesh edges on input segments: 15390 Steiner points inside domain: 1459 Generating volume mesh using TetGen..... Tetgen input string = pYq1.500/0.000T1.00e-16A Delaunizing vertices... Delaunay seconds: 2.55135 Creating surface mesh ... Surface mesh seconds: 0.297031 Recovering boundaries... Boundary recovery seconds: 0.909627 Removing exterior tetrahedra ... Warning: The 1-th region point lies outside the convex hull. Warning: The 2-th region point lies outside the convex hull. Warning: The 3-th region point lies outside the convex hull. Warning: The 4-th region point lies outside the convex hull. Spreading region attributes. Exterior tets removal seconds: 0.320575 Recovering Delaunayness... Delaunay recovery seconds: 0.734428 Refining mesh... Refinement seconds: 4.12451 Smoothing vertices... Mesh smoothing seconds: 4.48445 Improving mesh... Mesh improvement seconds: 0.254756 Writing nodes. Writing elements. Writing faces. Writing edges. Output seconds: 0.051473 Total running seconds: 13.7348 Statistics: Input points: 5130 Input facets: 10256 Input segments: 15384 Input holes: 0 Input regions: 5 Mesh points: 6609 Mesh tetrahedra: 23392 Mesh faces: 51912 Mesh faces on exterior boundary: 10256 Mesh faces on input facets: 10256 Mesh edges on input segments: 15384 Steiner points inside domain: 1479 Done meshing using TetGen! Writing VTK file: volume.vtk.... Finished writing VTK file Writing exodus file .... Block: 'tableTop_tet', blk_id 1, num_entries 15871 Block: 'leg0_tet', blk_id 2, num_entries 23352 Block: 'leg1_tet', blk_id 3, num_entries 23237 Block: 'leg2_tet', blk_id 4, num_entries 23307 Block: 'leg3_tet', blk_id 5, num_entries 23392 Sideset: 'leg0Side', set_id 1, num_entries 10260 Sideset: 'leg1Side', set_id 2, num_entries 10262 Sideset: 'leg2Side', set_id 3, num_entries 10260 Sideset: 'leg3Side', set_id 4, num_entries 10256 Sideset: 'tableTopSide', set_id 5, num_entries 8014 Nodeset: 'edge', set_id 1, num_entries 41 Nodeset: 'face1', set_id 2, num_entries 610 Nodeset: 'face2', set_id 3, num_entries 617 Nodeset: 'node', set_id 4, num_entries 1 Finished writing Exodus file ==228892== ==228892== HEAP SUMMARY: ==228892== in use at exit: 4,307,899 bytes in 23,727 blocks ==228892== total heap usage: 1,793,606 allocs, 1,769,879 frees, 1,019,522,163 bytes allocated ==228892== ==228892== LEAK SUMMARY: ==228892== definitely lost: 0 bytes in 0 blocks ==228892== indirectly lost: 0 bytes in 0 blocks ==228892== possibly lost: 0 bytes in 0 blocks ==228892== still reachable: 0 bytes in 0 blocks ==228892== suppressed: 4,307,899 bytes in 23,727 blocks ==228892== ==228892== For lists of detected and suppressed errors, rerun with: -s ==228892== ERROR SUMMARY: 0 errors from 0 contexts (suppressed: 1399 from 1399) 189.08user 1.67system 3:10.80elapsed 99%CPU (0avgtext+0avgdata 417944maxresident)k 0inputs+37840outputs (0major+505495minor)pagefaults 0swaps real 3m10.804s user 3m9.093s sys 0m1.696s + status=0 + set +x ================================================= CAPS verification (using pyCAPS) case plato_aflr_tetgen_table_PyTest.py passed (as expected) ================================================= ================================================= + echo 'plato_aflr_tetgen_cyli_box_PyTest.py test;' + tee -a /jenkins/workspace/ESP_ValgrindCaps/7.6/CAPS/STRUCTURE/LINUX64/ESP/LINUX64/examples/regressionTest/pyCAPSlog.txt plato_aflr_tetgen_cyli_box_PyTest.py test; + time valgrind --tool=memcheck --error-exitcode=0 --leak-check=yes --show-leak-kinds=all --keep-debuginfo=yes --gen-suppressions=all --max-stackframe=4000000 --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.6/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-AFLR.supp --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.6/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-exodus.supp --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.6/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-IRIT.supp --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.6/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-MKL.supp --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.6/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-python.supp --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.6/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-Tblade3.supp --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.6/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-Ubuntu.supp --suppressions=/jenkins/workspace/ESP_ValgrindCaps/7.6/CAPS/STRUCTURE/LINUX64/JenkinsESP/valgrind/valgrind-OCC7.6.supp python -u plato_aflr_tetgen_cyli_box_PyTest.py -outLevel=0 + tee -a /jenkins/workspace/ESP_ValgrindCaps/7.6/CAPS/STRUCTURE/LINUX64/ESP/LINUX64/examples/regressionTest/pyCAPSlog.txt ==258961== Memcheck, a memory error detector ==258961== Copyright (C) 2002-2017, and GNU GPL'd, by Julian Seward et al. ==258961== Using Valgrind-3.18.1 and LibVEX; rerun with -h for copyright info ==258961== Command: python -u plato_aflr_tetgen_cyli_box_PyTest.py -outLevel=0 ==258961== EGADS Warning: Loop 2 marked with -1 EGADS Warning: Loop 2 marked with -1 Mapping capsGroup attributes ................ Number of unique capsGroup attributes = 5 Name = box, index = 1 Name = cyl2, index = 2 Name = box;cyl2, index = 3 Name = cyl1, index = 4 Name = cyl1;box;cyl2, index = 5 Mapping capsMesh attributes ................ Number of unique capsMesh attributes = 0 AFLR2 : --------------------------------------- AFLR2 : AFLR2 LIBRARY AFLR2 : ADVANCING-FRONT/LOCAL-RECONNECTION AFLR2 : TRIA/QUAD GRID GENERATOR AFLR2 : Version Number 9.14.7 AFLR2 : Version Date 07/16/23 @ 01:42PM AFLR2 : Compile OS Linux 3.10.0-1160.88.1.el7.x86_64 x86_64 AFLR2 : Compile Date 07/25/23 @ 11:58AM AFLR2 : Copyright 1994-2021, D.L. Marcum AFLR2 : --------------------------------------- AFLR4 : --------------------------------------- AFLR4 : AFLR4 LIBRARY AFLR4 : ADVANCING-FRONT/LOCAL-RECONNECTION AFLR4 : TRIA/QUAD SURFACE GRID GENERATOR AFLR4 : Version Number 11.5.9 AFLR4 : Version Date 08/14/23 @ 12:27AM AFLR4 : Compile OS Linux 3.10.0-1160.88.1.el7.x86_64 x86_64 AFLR4 : Compile Date 08/14/23 @ 01:20PM AFLR4 : Copyright 1994-2021, D.L. Marcum AFLR4 : --------------------------------------- EGADS : --------------------------------------- EGADS : Engineering Geometry Aircraft Design System EGADS : Version 1.25 EGADS : OpenCASCADE Version 7.6.0 EGADS : --------------------------------------- EGADS : EGADS CAD Geometry Setup EGADS : Model has 1 Active Bodies EGADS : Body 0 is a SheetBody EGADS : Body 0 has 1 Shells EGADS : Body 0 has 14 Faces EGADS : Body 0 has 24 Edges EGADS : Body 0 has 18 Loops EGADS : Body 0 has 16 Nodes EGADS : Check Grid BCs EGADS : Grid BCs are OK EGADS : Face Neighbor-Faces Information EGADS : QC = Face Quad Combination Flag EGADS : IER = Face Isolated Edge Refinement Flag EGADS : ER = Face Edge Refinement Factor EGADS : Not applicable for Faces with a FarField Grid BC. EGADS : SF = Face Scale Factor EGADS : Not applicable for Faces with a FarField Grid BC. EGADS : Face Body QC IER ER Scale Neighbor EGADS : ID Active ID Flag Flag Weight Factor Faces EGADS : 1 Yes 0 0 1 0 1 2 6 7 8 EGADS : 2 Yes 0 0 1 0 1 1 3 4 5 7 8 9 EGADS : 3 Yes 0 0 1 0 1 2 4 6 9 12 EGADS : 4 Yes 0 0 1 0 1 2 3 6 9 12 EGADS : 5 Yes 0 0 1 0 1 2 6 7 8 EGADS : 6 Yes 0 0 1 0 1 1 3 4 5 7 8 12 EGADS : 7 Yes 0 0 1 0 1 1 2 5 6 EGADS : 8 Yes 0 0 1 0 1 1 2 5 6 EGADS : 9 Yes 0 0 1 0 1 2 3 4 10 11 13 EGADS : 10 Yes 0 0 1 0 1 9 11 12 13 14 EGADS : 11 Yes 0 0 1 0 1 9 10 12 13 14 EGADS : 12 Yes 0 0 1 0 1 3 4 6 10 11 14 EGADS : 13 Yes 0 0 1 0 1 9 10 11 EGADS : 14 Yes 0 0 1 0 1 10 11 12 EGADS : Face Edges Information EGADS : Face Edges EGADS : 1 -1 4 3 -2 EGADS : 2 5 1 -6 -7 8 9 EGADS : 3 10 -12 -11 8 EGADS : 4 -10 9 11 -13 EGADS : 5 7 14 -15 -16 EGADS : 6 -17 15 18 -3 -12 -13 EGADS : 7 16 17 -4 -5 EGADS : 8 -14 6 2 -18 EGADS : 9 -8 -9 19 20 EGADS : 10 21 -23 -22 19 EGADS : 11 -21 20 22 -24 EGADS : 12 12 13 -23 -24 EGADS : 13 -19 -20 EGADS : 14 23 24 EGADS : Face Loops Information EGADS : Face Loops EGADS : 1 1 EGADS : 2 2 3 EGADS : 3 4 EGADS : 4 5 EGADS : 5 6 EGADS : 6 7 8 EGADS : 7 9 EGADS : 8 10 EGADS : 9 11 12 EGADS : 10 13 EGADS : 11 14 EGADS : 12 15 16 EGADS : 13 17 EGADS : 14 18 EGADS : Loop Edges Information EGADS : Loop Active Sense Edges EGADS : 1 Yes 1 -1 4 3 -2 EGADS : 2 Yes 1 5 1 -6 -7 EGADS : 3 Yes 1 8 9 EGADS : 4 Yes 1 10 -12 -11 8 EGADS : 5 Yes 1 -10 9 11 -13 EGADS : 6 Yes 1 7 14 -15 -16 EGADS : 7 Yes 1 -17 15 18 -3 EGADS : 8 Yes 1 -12 -13 EGADS : 9 Yes 1 16 17 -4 -5 EGADS : 10 Yes 1 -14 6 2 -18 EGADS : 11 Yes 1 -8 -9 EGADS : 12 Yes 1 19 20 EGADS : 13 Yes 1 21 -23 -22 19 EGADS : 14 Yes 1 -21 20 22 -24 EGADS : 15 Yes 1 12 13 EGADS : 16 Yes 1 -23 -24 EGADS : 17 Yes 1 -19 -20 EGADS : 18 Yes 1 23 24 EGADS : Edge Node, Scale Factor, and Neighbor-Faces Information EGADS : ESF = Edge Scale Factor EGADS : Not applicable for DEGENERATE Edges or Edges with a FarField EGADS : Grid BC Neighbor Face. EGADS : Neighbor EGADS : Edge Body Active Node1 Node2 ESF Faces EGADS : 1 0 Yes 2 1 1 1 2 EGADS : 2 0 Yes 1 3 1 1 8 EGADS : 3 0 Yes 4 3 1 1 6 EGADS : 4 0 Yes 2 4 1 1 7 EGADS : 5 0 Yes 5 2 1 2 7 EGADS : 6 0 Yes 6 1 1 2 8 EGADS : 7 0 Yes 5 6 1 2 5 EGADS : 8 0 Yes 7 8 1 2 3 9 EGADS : 9 0 Yes 8 7 1 2 4 9 EGADS : 10 0 Yes 8 9 1 3 4 EGADS : 11 0 Yes 7 10 1 3 4 EGADS : 12 0 Yes 10 9 1 3 6 12 EGADS : 13 0 Yes 9 10 1 4 6 12 EGADS : 14 0 Yes 6 11 1 5 8 EGADS : 15 0 Yes 12 11 1 5 6 EGADS : 16 0 Yes 5 12 1 5 7 EGADS : 17 0 Yes 12 4 1 6 7 EGADS : 18 0 Yes 11 3 1 6 8 EGADS : 19 0 Yes 13 14 1 9 10 13 EGADS : 20 0 Yes 14 13 1 9 11 13 EGADS : 21 0 Yes 14 15 1 10 11 EGADS : 22 0 Yes 13 16 1 10 11 EGADS : 23 0 Yes 16 15 1 10 12 14 EGADS : 24 0 Yes 15 16 1 11 12 14 EGADS : Node Information EGADS : Node Active Coordinates EGADS : 1 Yes 0.5 0 0.5 EGADS : 2 Yes 0.5 0 0 EGADS : 3 Yes 0.5 0.5 0.5 EGADS : 4 Yes 0.5 0.5 0 EGADS : 5 Yes 0 0 0 EGADS : 6 Yes 0 0 0.5 EGADS : 7 Yes 0 0 0.2 EGADS : 8 Yes 0 0 0 EGADS : 9 Yes 0 0.5 0 EGADS : 10 Yes 0 0.5 0.2 EGADS : 11 Yes 0 0.5 0.5 EGADS : 12 Yes 0 0.5 0 EGADS : 13 Yes 0 0 0.1 EGADS : 14 Yes 0 0 0 EGADS : 15 Yes 0 0.5 0 EGADS : 16 Yes 0 0.5 0.1 EGADS : Face and Edge Match Information EGADS : No Face Matches Found AFLR4 : Surface Mesh Spacing Setup AFLR4 : Max Bounding Box Length = 1 AFLR4 : Min Bounding Box Length = 1 AFLR4 : Max Ref Bounding Box Length = 1 AFLR4 : Min Ref Bounding Box Length = 1 AFLR4 : Reference Length = 1 AFLR4 : BL Thickness = 0 AFLR4 : Abs Min Surf Spacing = 0.0025 AFLR4 : Min Surf Spacing = 0.005 AFLR4 : Max Surf Spacing = 0.1 AFLR4 : Global Scale Factor = 1 AFLR4 : Geometry Definition Information AFLR4 : Definition Definition Composite Grid BC AFLR4 : ID Type ID Type AFLR4 : 0 glue-only composite - - AFLR4 : 1 CAD geometry 0 STD AFLR4 : 2 CAD geometry 0 STD AFLR4 : 3 CAD geometry 0 TRANSP AFLR4 : 4 CAD geometry 0 TRANSP AFLR4 : 5 CAD geometry 0 STD AFLR4 : 6 CAD geometry 0 STD AFLR4 : 7 CAD geometry 0 STD AFLR4 : 8 CAD geometry 0 STD AFLR4 : 9 CAD geometry 0 STD AFLR4 : 10 CAD geometry 0 TRANSP AFLR4 : 11 CAD geometry 0 TRANSP AFLR4 : 12 CAD geometry 0 STD AFLR4 : 13 CAD geometry 0 STD AFLR4 : 14 CAD geometry 0 STD AFLR4 : Define CAD surface definition 1 AFLR4 : Define CAD surface definition 2 AFLR4 : Define CAD surface definition 3 AFLR4 : Define CAD surface definition 4 AFLR4 : Define CAD surface definition 5 AFLR4 : Define CAD surface definition 6 AFLR4 : Define CAD surface definition 7 AFLR4 : Define CAD surface definition 8 AFLR4 : Define CAD surface definition 9 AFLR4 : Define CAD surface definition 10 AFLR4 : Define CAD surface definition 11 AFLR4 : Define CAD surface definition 12 AFLR4 : Define CAD surface definition 13 AFLR4 : Define CAD surface definition 14 AFLR4 : Surface Grid Generation AFLR4 : Generate optimal mesh on surface definition 1 AFLR2 : Nodes, Trias,Quads= 136 230 0 AFLR4 : Nodes, Trias,Quads= 132 222 0 AFLR4 : Generate optimal mesh on surface definition 2 AFLR2 : Nodes, Trias,Quads= 486 868 0 AFLR4 : Nodes, Trias,Quads= 477 850 0 AFLR4 : Generate optimal mesh on surface definition 3 AFLR2 : Nodes, Trias,Quads= 1904 3642 0 AFLR4 : Nodes, Trias,Quads= 1889 3612 0 AFLR4 : Generate optimal mesh on surface definition 4 AFLR2 : Nodes, Trias,Quads= 1904 3642 0 AFLR4 : Nodes, Trias,Quads= 1889 3612 0 AFLR4 : Generate optimal mesh on surface definition 5 AFLR2 : Nodes, Trias,Quads= 136 230 0 AFLR4 : Nodes, Trias,Quads= 132 222 0 AFLR4 : Generate optimal mesh on surface definition 6 AFLR2 : Nodes, Trias,Quads= 486 868 0 AFLR4 : Nodes, Trias,Quads= 476 848 0 AFLR4 : Generate optimal mesh on surface definition 7 AFLR2 : Nodes, Trias,Quads= 134 226 0 AFLR4 : Nodes, Trias,Quads= 132 222 0 AFLR4 : Generate optimal mesh on surface definition 8 AFLR2 : Nodes, Trias,Quads= 135 228 0 AFLR4 : Nodes, Trias,Quads= 131 220 0 AFLR4 : Generate optimal mesh on surface definition 9 AFLR2 : Nodes, Trias,Quads= 582 1036 0 AFLR4 : Nodes, Trias,Quads= 576 1024 0 AFLR4 : Generate optimal mesh on surface definition 10 AFLR2 : Nodes, Trias,Quads= 3745 7224 0 AFLR4 : Nodes, Trias,Quads= 3741 7216 0 AFLR4 : Generate optimal mesh on surface definition 11 AFLR2 : Nodes, Trias,Quads= 3745 7224 0 AFLR4 : Nodes, Trias,Quads= 3741 7216 0 AFLR4 : Generate optimal mesh on surface definition 12 AFLR2 : Nodes, Trias,Quads= 582 1036 0 AFLR4 : Nodes, Trias,Quads= 576 1024 0 AFLR4 : Generate optimal mesh on surface definition 13 AFLR2 : Nodes, Trias,Quads= 504 942 0 AFLR4 : Nodes, Trias,Quads= 402 738 0 AFLR4 : Generate optimal mesh on surface definition 14 AFLR2 : Nodes, Trias,Quads= 515 964 0 AFLR4 : Nodes, Trias,Quads= 413 760 0 DGEOM : Add surface definitions to composite definition 0 DGEOM : Glue composite surface definition 0 DGEOM : Nodes,Faces,BEdges= 13767 27786 1608 AFLR4 : Curvature BG Surface Grid Generation AFLR4 : Nodes, Faces = 13767 27786 AFLR4 : Surface Grid Generation AFLR4 : Generate optimal mesh on surface definition 1 AFLR2 : Nodes, Trias,Quads= 137 232 0 AFLR4 : Nodes, Trias,Quads= 132 222 0 AFLR4 : Generate optimal mesh on surface definition 2 AFLR2 : Nodes, Trias,Quads= 507 910 0 AFLR4 : Nodes, Trias,Quads= 711 1318 0 AFLR4 : Generate optimal mesh on surface definition 3 AFLR2 : Nodes, Trias,Quads= 1882 3598 0 AFLR4 : Nodes, Trias,Quads= 1884 3602 0 AFLR4 : Generate optimal mesh on surface definition 4 AFLR2 : Nodes, Trias,Quads= 1876 3586 0 AFLR4 : Nodes, Trias,Quads= 1881 3596 0 AFLR4 : Generate optimal mesh on surface definition 5 AFLR2 : Nodes, Trias,Quads= 136 230 0 AFLR4 : Nodes, Trias,Quads= 132 222 0 AFLR4 : Generate optimal mesh on surface definition 6 AFLR2 : Nodes, Trias,Quads= 499 894 0 AFLR4 : Nodes, Trias,Quads= 710 1316 0 AFLR4 : Generate optimal mesh on surface definition 7 AFLR2 : Nodes, Trias,Quads= 136 230 0 AFLR4 : Nodes, Trias,Quads= 132 222 0 AFLR4 : Generate optimal mesh on surface definition 8 AFLR2 : Nodes, Trias,Quads= 137 232 0 AFLR4 : Nodes, Trias,Quads= 132 222 0 AFLR4 : Generate optimal mesh on surface definition 9 AFLR2 : Nodes, Trias,Quads= 576 1024 0 AFLR4 : Nodes, Trias,Quads= 576 1024 0 AFLR4 : Generate optimal mesh on surface definition 10 AFLR2 : Nodes, Trias,Quads= 3736 7206 0 AFLR4 : Nodes, Trias,Quads= 3727 7188 0 AFLR4 : Generate optimal mesh on surface definition 11 AFLR2 : Nodes, Trias,Quads= 3735 7204 0 AFLR4 : Nodes, Trias,Quads= 3730 7194 0 AFLR4 : Generate optimal mesh on surface definition 12 AFLR2 : Nodes, Trias,Quads= 576 1024 0 AFLR4 : Nodes, Trias,Quads= 576 1024 0 AFLR4 : Generate optimal mesh on surface definition 13 AFLR2 : Nodes, Trias,Quads= 504 942 0 AFLR4 : Nodes, Trias,Quads= 406 746 0 AFLR4 : Generate optimal mesh on surface definition 14 AFLR2 : Nodes, Trias,Quads= 498 930 0 AFLR4 : Nodes, Trias,Quads= 416 766 0 DGEOM : Add surface definitions to composite definition 0 DGEOM : Glue composite surface definition 0 DGEOM : Nodes,Faces,BEdges= 14205 28662 1608 OVERALL : CPU Time = 16.625 seconds Body 1 (of 1) Number of nodes = 14205 Number of elements = 28662 Number of node elements = 0 Number of line elements = 0 Number of triangle elements = 28662 Number of quadrilateral elements = 0 ---------------------------- Total number of nodes = 14205 Total number of elements = 28662 Mapping capsGroup attributes ................ Number of unique capsGroup attributes = 5 Name = box, index = 1 Name = cyl2, index = 2 Name = box;cyl2, index = 3 Name = cyl1, index = 4 Name = cyl1;box;cyl2, index = 5 Number of surface: nodes - 14205, elements - 28662 Getting volume mesh Generating volume mesh using TetGen..... Tetgen input string = pYq1.500/0.000T1.00e-16A Delaunizing vertices... Delaunay seconds: 5.03029 Creating surface mesh ... Surface mesh seconds: 0.483115 Recovering boundaries... Boundary recovery seconds: 1.22811 Removing exterior tetrahedra ... Warning: The 3-th region point lies outside the convex hull. Spreading region attributes. Exterior tets removal seconds: 0.18742 Recovering Delaunayness... Delaunay recovery seconds: 3.82091 Refining mesh... Refinement seconds: 10.907 Smoothing vertices... Mesh smoothing seconds: 25.0835 Improving mesh... Mesh improvement seconds: 1.32315 Writing nodes. Writing elements. Writing faces. Writing edges. Output seconds: 0.164217 Total running seconds: 48.2391 Statistics: Input points: 14205 Input facets: 28662 Input segments: 42865 Input holes: 0 Input regions: 3 Mesh points: 22408 Mesh tetrahedra: 122233 Mesh faces: 248007 Mesh faces on exterior boundary: 7082 Mesh faces on input facets: 28662 Mesh edges on input segments: 42865 Steiner points inside domain: 8203 Done meshing using TetGen! Writing VTK file: volume.vtk.... Finished writing VTK file Writing exodus file .... Block: 'c_tet', blk_id 1, num_entries 27550 Block: 'b_tet', blk_id 2, num_entries 58313 Block: 'a_tet', blk_id 3, num_entries 36370 Sideset: 'box', set_id 1, num_entries 7082 Sideset: 'cyl1', set_id 2, num_entries 15894 Sideset: 'cyl2', set_id 3, num_entries 10758 Finished writing Exodus file ==258961== ==258961== HEAP SUMMARY: ==258961== in use at exit: 4,307,899 bytes in 23,727 blocks ==258961== total heap usage: 2,234,243 allocs, 2,210,516 frees, 772,276,821 bytes allocated ==258961== ==258961== LEAK SUMMARY: ==258961== definitely lost: 0 bytes in 0 blocks ==258961== indirectly lost: 0 bytes in 0 blocks ==258961== possibly lost: 0 bytes in 0 blocks ==258961== still reachable: 0 bytes in 0 blocks ==258961== suppressed: 4,307,899 bytes in 23,727 blocks ==258961== ==258961== For lists of detected and suppressed errors, rerun with: -s ==258961== ERROR SUMMARY: 0 errors from 0 contexts (suppressed: 1401 from 1401) 172.30user 2.06system 2:54.48elapsed 99%CPU (0avgtext+0avgdata 531688maxresident)k 0inputs+32312outputs (0major+824352minor)pagefaults 0swaps real 2m54.483s user 2m52.309s sys 0m2.083s + status=0 + set +x ================================================= CAPS verification (using pyCAPS) case plato_aflr_tetgen_cyli_box_PyTest.py passed (as expected) ================================================= ************************************************* ************************************************* ================================================= Did not run examples for: Astros Nastran ================================================= All tests pass! + exit 0 [GNU C Compiler (gcc)] Parsing console log (workspace: '/jenkins/workspace/ESP_ValgrindCaps/7.6/CAPS/STRUCTURE/LINUX64') [GNU C Compiler (gcc)] Successfully parsed console log [GNU C Compiler (gcc)] -> found 0 issues (skipped 0 duplicates) [GNU C Compiler (gcc)] Skipping post processing [GNU C Compiler (gcc)] No filter has been set, publishing all 0 issues [GNU C Compiler (gcc)] Repository miner is not configured, skipping repository mining [Clang] Parsing console log (workspace: '/jenkins/workspace/ESP_ValgrindCaps/7.6/CAPS/STRUCTURE/LINUX64') [Clang] -> found 0 issues (skipped 0 duplicates) [Clang] Parsing console log (workspace: '/jenkins/workspace/ESP_ValgrindCaps/7.6/CAPS/STRUCTURE/LINUX64') [Clang] -> found 0 issues (skipped 0 duplicates) [Clang] Successfully parsed console log [Clang] -> found 0 issues (skipped 0 duplicates) [Clang] Parsing console log (workspace: '/jenkins/workspace/ESP_ValgrindCaps/7.6/CAPS/STRUCTURE/LINUX64') [Clang] Skipping post processing [Clang] No filter has been set, publishing all 0 issues [Clang] Repository miner is not configured, skipping repository mining [Static Analysis] Successfully parsed console log [Static Analysis] -> found 0 issues (skipped 0 duplicates) [Static Analysis] Parsing console log (workspace: '/jenkins/workspace/ESP_ValgrindCaps/7.6/CAPS/STRUCTURE/LINUX64') [Static Analysis] Successfully parsed console log [Static Analysis] -> found 0 issues (skipped 0 duplicates) [Static Analysis] Skipping post processing [Static Analysis] No filter has been set, publishing all 0 issues [Static Analysis] Repository miner is not configured, skipping repository mining [Static Analysis] Successfully parsed console log [Static Analysis] -> found 0 issues (skipped 0 duplicates) [Static Analysis] Successfully parsed console log [Static Analysis] -> found 0 issues (skipped 0 duplicates) [Static Analysis] Successfully parsed console log [Static Analysis] -> found 0 issues (skipped 0 duplicates) [Static Analysis] Parsing console log (workspace: '/jenkins/workspace/ESP_ValgrindCaps/7.6/CAPS/STRUCTURE/LINUX64') [Static Analysis] Skipping post processing [Static Analysis] No filter has been set, publishing all 0 issues [Static Analysis] Repository miner is not configured, skipping repository mining [Static Analysis] Reference build recorder is not configured [Static Analysis] No valid reference build found [Static Analysis] All reported issues will be considered outstanding [Static Analysis] No quality gates have been set - skipping [Static Analysis] Health report is disabled - skipping [Static Analysis] Created analysis result for 0 issues (found 0 new issues, fixed 0 issues) [Static Analysis] Attaching ResultAction with ID 'analysis' to build 'ESP_ValgrindCaps/CASREV=7.6,ESPTEST=CAPS/STRUCTURE,ESP_ARCH=LINUX64,buildnode=reynolds #216'. [Checks API] No suitable checks publisher found. [Valgrind] Files to copy: [Valgrind] Analysing valgrind results [Valgrind] Ending the valgrind analysis. [PostBuildScript] - [INFO] Executing post build scripts. [PostBuildScript] - [INFO] build step #0 should only be executed on MATRIX [WS-CLEANUP] Deleting project workspace... [WS-CLEANUP] done Finished: SUCCESS