Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsReference attributes ................
Number of unique capsReference attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Warning: No capsGroup/capsIgnore attribute found on edge 1 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 2 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 3 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 4 of face 1, unable to assign a boundary index value
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsReference attributes ................
Number of unique capsReference attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Warning: No capsGroup/capsIgnore attribute found on edge 1 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 2 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 3 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 4 of face 1, unable to assign a boundary index value
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsReference attributes ................
Number of unique capsReference attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Warning: No capsGroup/capsIgnore attribute found on edge 1 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 2 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 3 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 4 of face 1, unable to assign a boundary index value
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsReference attributes ................
Number of unique capsReference attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Warning: No capsGroup/capsIgnore attribute found on edge 1 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 2 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 3 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 4 of face 1, unable to assign a boundary index value
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsReference attributes ................
Number of unique capsReference attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Warning: No capsGroup/capsIgnore attribute found on edge 1 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 2 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 3 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 4 of face 1, unable to assign a boundary index value
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsReference attributes ................
Number of unique capsReference attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Warning: No capsGroup/capsIgnore attribute found on edge 1 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 2 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 3 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 4 of face 1, unable to assign a boundary index value
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsReference attributes ................
Number of unique capsReference attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Warning: No capsGroup/capsIgnore attribute found on edge 1 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 2 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 3 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 4 of face 1, unable to assign a boundary index value
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsReference attributes ................
Number of unique capsReference attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Warning: No capsGroup/capsIgnore attribute found on edge 1 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 2 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 3 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 4 of face 1, unable to assign a boundary index value
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsReference attributes ................
Number of unique capsReference attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Warning: No capsGroup/capsIgnore attribute found on edge 1 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 2 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 3 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 4 of face 1, unable to assign a boundary index value
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsReference attributes ................
Number of unique capsReference attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Warning: No capsGroup/capsIgnore attribute found on edge 1 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 2 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 3 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 4 of face 1, unable to assign a boundary index value
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsReference attributes ................
Number of unique capsReference attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Warning: No capsGroup/capsIgnore attribute found on edge 1 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 2 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 3 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 4 of face 1, unable to assign a boundary index value
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
ok
test_Multiple_Mesh (test_tetgen.TestTETGEN.test_Multiple_Mesh) ... ERROR:: BAD STATUS = -276 from matsol (called from solveSketchOrig:61202)
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 7
Name = box, index = 1
Name = cylinder, index = 2
Name = cone, index = 3
Name = torus, index = 4
Name = sphere, index = 5
Name = boxhole, index = 6
Name = bullet, index = 7
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 1
Name = box, index = 1
Getting surface mesh for body 1 (of 7)
Getting surface mesh for body 2 (of 7)
Getting surface mesh for body 3 (of 7)
Getting surface mesh for body 4 (of 7)
Getting surface mesh for body 5 (of 7)
Getting surface mesh for body 6 (of 7)
10D3AEE00 EGADS Info: Face #3 -> Edge #9 (9) Internally in Loop 4 7, sen = -1!
10D3AEE00 EGADS Info: Face #3 -> Edge #9 (9) Internally in Loop 7 4, sen = 1!
10D3AEE00 EGADS Info: Face #5 -> Edge #17 (9) Internally in Loop 7 4, sen = -1!
10D3AEE00 EGADS Info: Face #5 -> Edge #17 (9) Internally in Loop 4 7, sen = 1!
Getting surface mesh for body 7 (of 7)
Body 1 (of 7)
Number of nodes = 98
Number of elements = 192
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 192
Number of quadrilateral elements = 0
Body 2 (of 7)
Number of nodes = 294
Number of elements = 584
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 584
Number of quadrilateral elements = 0
Body 3 (of 7)
Number of nodes = 488
Number of elements = 972
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 972
Number of quadrilateral elements = 0
Warning: No capsGroup/capsIgnore attribute found on edge 1 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 2 of face 1, unable to assign a boundary index value
Body 4 (of 7)
Number of nodes = 2048
Number of elements = 4096
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 4096
Number of quadrilateral elements = 0
Body 5 (of 7)
Number of nodes = 152
Number of elements = 300
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 300
Number of quadrilateral elements = 0
Body 6 (of 7)
Number of nodes = 624
Number of elements = 1248
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 1248
Number of quadrilateral elements = 0
Body 7 (of 7)
Number of nodes = 488
Number of elements = 972
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 972
Number of quadrilateral elements = 0
----------------------------
Total number of nodes = 4192
Total number of elements = 8364
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 7
Name = box, index = 1
Name = cylinder, index = 2
Name = cone, index = 3
Name = torus, index = 4
Name = sphere, index = 5
Name = boxhole, index = 6
Name = bullet, index = 7
Warning: No capsGroup/capsIgnore attribute found on edge 1 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 2 of face 1, unable to assign a boundary index value
Body 1 number of surface: nodes - 98, elements - 192
Body 2 number of surface: nodes - 294, elements - 584
Body 3 number of surface: nodes - 488, elements - 972
Body 4 number of surface: nodes - 2048, elements - 4096
Body 5 number of surface: nodes - 152, elements - 300
Body 6 number of surface: nodes - 624, elements - 1248
Body 7 number of surface: nodes - 488, elements - 972
Getting volume mesh for body 1 (of 7)
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = box, index = 1
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.00318
Creating surface mesh ...
Surface mesh seconds: 0.000457
Recovering boundaries...
Boundary recovery seconds: 0.001325
Removing exterior tetrahedra ...
Spreading region attributes.
Exterior tets removal seconds: 7.5e-05
Recovering Delaunayness...
Delaunay recovery seconds: 0.001146
Refining mesh...
Refinement seconds: 0.019834
Smoothing vertices...
Mesh smoothing seconds: 0.003408
Improving mesh...
Mesh improvement seconds: 0.000153
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.000104
Total running seconds: 0.029849
Statistics:
Input points: 98
Input facets: 192
Input segments: 288
Input holes: 0
Input regions: 0
Mesh points: 100
Mesh tetrahedra: 232
Mesh faces: 560
Mesh faces on exterior boundary: 192
Mesh faces on input facets: 192
Mesh edges on input segments: 288
Steiner points inside domain: 2
Done meshing using TetGen!
Getting volume mesh for body 2 (of 7)
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = cylinder, index = 1
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.024372
Creating surface mesh ...
Surface mesh seconds: 0.000752
Recovering boundaries...
Boundary recovery seconds: 0.002767
Removing exterior tetrahedra ...
Spreading region attributes.
Exterior tets removal seconds: 0.000586
Recovering Delaunayness...
Delaunay recovery seconds: 0.014838
Refining mesh...
Refinement seconds: 0.040302
Smoothing vertices...
Mesh smoothing seconds: 0.025332
Improving mesh...
Mesh improvement seconds: 0.000536
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.000137
Total running seconds: 0.10972
Statistics:
Input points: 294
Input facets: 584
Input segments: 876
Input holes: 0
Input regions: 0
Mesh points: 342
Mesh tetrahedra: 1038
Mesh faces: 2368
Mesh faces on exterior boundary: 584
Mesh faces on input facets: 584
Mesh edges on input segments: 876
Steiner points inside domain: 48
Done meshing using TetGen!
Getting volume mesh for body 3 (of 7)
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = cone, index = 1
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.13475
Creating surface mesh ...
Surface mesh seconds: 0.00125
Recovering boundaries...
Boundary recovery seconds: 0.007769
Removing exterior tetrahedra ...
Spreading region attributes.
Exterior tets removal seconds: 0.001259
Recovering Delaunayness...
Delaunay recovery seconds: 0.016875
Refining mesh...
650 insertions, added 167 points, 7377 tetrahedra in queue.
216 insertions, added 8 points, 5933 tetrahedra in queue.
288 insertions, added 11 points, 2914 tetrahedra in queue.
384 insertions, added 11 points, 392 tetrahedra in queue.
512 insertions, added 15 points, 93 tetrahedra in queue.
Refinement seconds: 0.332625
Smoothing vertices...
Mesh smoothing seconds: 0.104596
Improving mesh...
Mesh improvement seconds: 0.001482
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.000278
Total running seconds: 0.60098
Statistics:
Input points: 488
Input facets: 972
Input segments: 1458
Input holes: 0
Input regions: 0
Mesh points: 706
Mesh tetrahedra: 2870
Mesh faces: 6226
Mesh faces on exterior boundary: 972
Mesh faces on input facets: 972
Mesh edges on input segments: 1458
Steiner points inside domain: 218
Done meshing using TetGen!
Getting volume mesh for body 4 (of 7)
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = torus, index = 1
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.695052
Creating surface mesh ...
Surface mesh seconds: 0.005931
Recovering boundaries...
Boundary recovery seconds: 0.01754
Removing exterior tetrahedra ...
Spreading region attributes.
Exterior tets removal seconds: 0.009634
Recovering Delaunayness...
Delaunay recovery seconds: 0.148345
Refining mesh...
Refinement seconds: 0.404243
Smoothing vertices...
Mesh smoothing seconds: 0.487292
Improving mesh...
Mesh improvement seconds: 0.011247
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.001616
Total running seconds: 1.7813
Statistics:
Input points: 2048
Input facets: 4096
Input segments: 6144
Input holes: 0
Input regions: 0
Mesh points: 2904
Mesh tetrahedra: 11373
Mesh faces: 24794
Mesh faces on exterior boundary: 4096
Mesh faces on input facets: 4096
Mesh edges on input segments: 6144
Steiner points inside domain: 856
Done meshing using TetGen!
Getting volume mesh for body 5 (of 7)
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = sphere, index = 1
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.000803
Creating surface mesh ...
Surface mesh seconds: 0.000404
Recovering boundaries...
Boundary recovery seconds: 0.0008
Removing exterior tetrahedra ...
Spreading region attributes.
Exterior tets removal seconds: 0.000183
Recovering Delaunayness...
Delaunay recovery seconds: 0.000957
Refining mesh...
202 insertions, added 46 points, 0 tetrahedra in queue.
Refinement seconds: 0.006894
Smoothing vertices...
Mesh smoothing seconds: 0.007991
Improving mesh...
Mesh improvement seconds: 0.000348
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 7.9e-05
Total running seconds: 0.018532
Statistics:
Input points: 152
Input facets: 300
Input segments: 450
Input holes: 0
Input regions: 0
Mesh points: 198
Mesh tetrahedra: 672
Mesh faces: 1494
Mesh faces on exterior boundary: 300
Mesh faces on input facets: 300
Mesh edges on input segments: 450
Steiner points inside domain: 46
Done meshing using TetGen!
Getting volume mesh for body 6 (of 7)
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = boxhole, index = 1
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.057423
Creating surface mesh ...
Surface mesh seconds: 0.001523
Recovering boundaries...
Boundary recovery seconds: 0.005645
Removing exterior tetrahedra ...
Spreading region attributes.
Exterior tets removal seconds: 0.001357
Recovering Delaunayness...
Delaunay recovery seconds: 0.007134
Refining mesh...
831 insertions, added 215 points, 5504 tetrahedra in queue.
Refinement seconds: 0.084733
Smoothing vertices...
Mesh smoothing seconds: 0.07207
Improving mesh...
Mesh improvement seconds: 0.001805
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.000328
Total running seconds: 0.232136
Statistics:
Input points: 624
Input facets: 1248
Input segments: 1872
Input holes: 0
Input regions: 0
Mesh points: 846
Mesh tetrahedra: 3169
Mesh faces: 6962
Mesh faces on exterior boundary: 1248
Mesh faces on input facets: 1248
Mesh edges on input segments: 1872
Steiner points inside domain: 222
Done meshing using TetGen!
Getting volume mesh for body 7 (of 7)
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = bullet, index = 1
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.039883
Creating surface mesh ...
Surface mesh seconds: 0.001148
Recovering boundaries...
Boundary recovery seconds: 0.046934
Removing exterior tetrahedra ...
Spreading region attributes.
Exterior tets removal seconds: 0.000833
Suppressing Steiner points ...
Steiner suppression seconds: 2.3e-05
Recovering Delaunayness...
Delaunay recovery seconds: 0.037224
Refining mesh...
Refinement seconds: 0.054141
Smoothing vertices...
Mesh smoothing seconds: 0.040895
Improving mesh...
Mesh improvement seconds: 0.001336
Jettisoning redundant points.
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.000286
Total running seconds: 0.223206
Statistics:
Input points: 488
Input facets: 972
Input segments: 1458
Input holes: 0
Input regions: 0
Mesh points: 672
Mesh tetrahedra: 2513
Mesh faces: 5512
Mesh faces on exterior boundary: 972
Mesh faces on input facets: 972
Mesh edges on input segments: 1458
Steiner points inside domain: 184
Done meshing using TetGen!
Writing AFLR3 file ....
Finished writing AFLR3 file
Writing AFLR3 file ....
Finished writing AFLR3 file
Writing AFLR3 file ....
Finished writing AFLR3 file
Writing AFLR3 file ....
Finished writing AFLR3 file
Writing AFLR3 file ....
Finished writing AFLR3 file
Writing AFLR3 file ....
Finished writing AFLR3 file
Writing AFLR3 file ....
Finished writing AFLR3 file
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 7
Name = box, index = 1
Name = cylinder, index = 2
Name = cone, index = 3
Name = torus, index = 4
Name = sphere, index = 5
Name = boxhole, index = 6
Name = bullet, index = 7
Warning: No capsGroup/capsIgnore attribute found on edge 1 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 2 of face 1, unable to assign a boundary index value
Body 1 number of surface: nodes - 98, elements - 192
Body 2 number of surface: nodes - 294, elements - 584
Body 3 number of surface: nodes - 488, elements - 972
Body 4 number of surface: nodes - 2048, elements - 4096
Body 5 number of surface: nodes - 152, elements - 300
Body 6 number of surface: nodes - 624, elements - 1248
Body 7 number of surface: nodes - 488, elements - 972
Getting volume mesh
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.003111
Creating surface mesh ...
Surface mesh seconds: 0.000264
Recovering boundaries...
Boundary recovery seconds: 0.001036
Removing exterior tetrahedra ...
Spreading region attributes.
Exterior tets removal seconds: 7.1e-05
Recovering Delaunayness...
Delaunay recovery seconds: 0.00116
Refining mesh...
Refinement seconds: 0.000936
Smoothing vertices...
Mesh smoothing seconds: 0.003565
Improving mesh...
Mesh improvement seconds: 0.000172
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 5.4e-05
Total running seconds: 0.010452
Statistics:
Input points: 98
Input facets: 192
Input segments: 288
Input holes: 0
Input regions: 1
Mesh points: 100
Mesh tetrahedra: 232
Mesh faces: 560
Mesh faces on exterior boundary: 192
Mesh faces on input facets: 192
Mesh edges on input segments: 288
Steiner points inside domain: 2
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.027177
Creating surface mesh ...
Surface mesh seconds: 0.000762
Recovering boundaries...
Boundary recovery seconds: 0.002678
Removing exterior tetrahedra ...
Warning: The 1-th region point lies outside the convex hull.
Spreading region attributes.
Exterior tets removal seconds: 0.000563
Recovering Delaunayness...
Delaunay recovery seconds: 0.005198
Refining mesh...
Refinement seconds: 0.028418
Smoothing vertices...
Mesh smoothing seconds: 0.023288
Improving mesh...
Mesh improvement seconds: 0.000874
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.000171
Total running seconds: 0.089283
Statistics:
Input points: 294
Input facets: 584
Input segments: 876
Input holes: 0
Input regions: 2
Mesh points: 342
Mesh tetrahedra: 1038
Mesh faces: 2368
Mesh faces on exterior boundary: 584
Mesh faces on input facets: 584
Mesh edges on input segments: 876
Steiner points inside domain: 48
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.066037
Creating surface mesh ...
Surface mesh seconds: 0.002033
Recovering boundaries...
Boundary recovery seconds: 0.008094
Removing exterior tetrahedra ...
Warning: The 1-th region point lies outside the convex hull.
Warning: The 2-th region point lies outside the convex hull.
Spreading region attributes.
Exterior tets removal seconds: 0.001332
Recovering Delaunayness...
Delaunay recovery seconds: 0.03119
Refining mesh...
650 insertions, added 167 points, 7377 tetrahedra in queue.
216 insertions, added 8 points, 5933 tetrahedra in queue.
288 insertions, added 11 points, 2914 tetrahedra in queue.
384 insertions, added 11 points, 392 tetrahedra in queue.
512 insertions, added 15 points, 93 tetrahedra in queue.
Refinement seconds: 0.225888
Smoothing vertices...
Mesh smoothing seconds: 0.067442
Improving mesh...
Mesh improvement seconds: 0.001462
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.000262
Total running seconds: 0.403857
Statistics:
Input points: 488
Input facets: 972
Input segments: 1458
Input holes: 0
Input regions: 3
Mesh points: 706
Mesh tetrahedra: 2870
Mesh faces: 6226
Mesh faces on exterior boundary: 972
Mesh faces on input facets: 972
Mesh edges on input segments: 1458
Steiner points inside domain: 218
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.906296
Creating surface mesh ...
Surface mesh seconds: 0.016521
Recovering boundaries...
Boundary recovery seconds: 0.0332
Removing exterior tetrahedra ...
Warning: The 1-th region point lies outside the convex hull.
Warning: The 2-th region point lies outside the convex hull.
Warning: The 3-th region point lies outside the convex hull.
Spreading region attributes.
Exterior tets removal seconds: 0.014833
Recovering Delaunayness...
Delaunay recovery seconds: 0.162884
Refining mesh...
Refinement seconds: 0.489063
Smoothing vertices...
Mesh smoothing seconds: 0.515706
Improving mesh...
Mesh improvement seconds: 0.016473
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.001609
Total running seconds: 2.15697
Statistics:
Input points: 2048
Input facets: 4096
Input segments: 6144
Input holes: 0
Input regions: 4
Mesh points: 2912
Mesh tetrahedra: 11359
Mesh faces: 24766
Mesh faces on exterior boundary: 4096
Mesh faces on input facets: 4096
Mesh edges on input segments: 6144
Steiner points inside domain: 864
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.00061
Creating surface mesh ...
Surface mesh seconds: 0.000528
Recovering boundaries...
Boundary recovery seconds: 0.000485
Removing exterior tetrahedra ...
Warning: The 1-th region point lies outside the convex hull.
Warning: The 2-th region point lies outside the convex hull.
Warning: The 3-th region point lies outside the convex hull.
Warning: The 4-th region point lies outside the convex hull.
Spreading region attributes.
Exterior tets removal seconds: 0.00021
Recovering Delaunayness...
Delaunay recovery seconds: 0.000874
Refining mesh...
202 insertions, added 46 points, 0 tetrahedra in queue.
Refinement seconds: 0.00652
Smoothing vertices...
Mesh smoothing seconds: 0.004811
Improving mesh...
Mesh improvement seconds: 0.000354
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 9.4e-05
Total running seconds: 0.014589
Statistics:
Input points: 152
Input facets: 300
Input segments: 450
Input holes: 0
Input regions: 5
Mesh points: 198
Mesh tetrahedra: 672
Mesh faces: 1494
Mesh faces on exterior boundary: 300
Mesh faces on input facets: 300
Mesh edges on input segments: 450
Steiner points inside domain: 46
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.107597
Creating surface mesh ...
Surface mesh seconds: 0.013445
Recovering boundaries...
Boundary recovery seconds: 0.008003
Removing exterior tetrahedra ...
Warning: The 1-th region point lies outside the convex hull.
Warning: The 2-th region point lies outside the convex hull.
Warning: The 3-th region point lies outside the convex hull.
Warning: The 4-th region point lies outside the convex hull.
Warning: The 5-th region point lies outside the convex hull.
Spreading region attributes.
Exterior tets removal seconds: 0.001451
Recovering Delaunayness...
Delaunay recovery seconds: 0.021332
Refining mesh...
831 insertions, added 215 points, 5504 tetrahedra in queue.
Refinement seconds: 0.135007
Smoothing vertices...
Mesh smoothing seconds: 0.097568
Improving mesh...
Mesh improvement seconds: 0.022521
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.00032
Total running seconds: 0.407392
Statistics:
Input points: 624
Input facets: 1248
Input segments: 1872
Input holes: 0
Input regions: 6
Mesh points: 846
Mesh tetrahedra: 3169
Mesh faces: 6962
Mesh faces on exterior boundary: 1248
Mesh faces on input facets: 1248
Mesh edges on input segments: 1872
Steiner points inside domain: 222
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.040095
Creating surface mesh ...
Surface mesh seconds: 0.00169
Recovering boundaries...
Boundary recovery seconds: 0.04757
Removing exterior tetrahedra ...
Warning: The 1-th region point lies outside the convex hull.
Warning: The 2-th region point lies outside the convex hull.
Warning: The 3-th region point lies outside the convex hull.
Warning: The 4-th region point lies outside the convex hull.
Warning: The 5-th region point lies outside the convex hull.
Warning: The 6-th region point lies outside the convex hull.
Spreading region attributes.
Exterior tets removal seconds: 0.000818
Suppressing Steiner points ...
Steiner suppression seconds: 8e-06
Recovering Delaunayness...
Delaunay recovery seconds: 0.038265
Refining mesh...
Refinement seconds: 0.054208
Smoothing vertices...
Mesh smoothing seconds: 0.040695
Improving mesh...
Mesh improvement seconds: 0.001304
Jettisoning redundant points.
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.000248
Total running seconds: 0.225387
Statistics:
Input points: 488
Input facets: 972
Input segments: 1458
Input holes: 0
Input regions: 7
Mesh points: 673
Mesh tetrahedra: 2528
Mesh faces: 5542
Mesh faces on exterior boundary: 972
Mesh faces on input facets: 972
Mesh edges on input segments: 1458
Steiner points inside domain: 185
Done meshing using TetGen!
Writing AFLR3 file ....
Finished writing AFLR3 file
ok
test_journal (test_tetgen.TestTETGEN.test_journal) ... Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 3
Name = Farfield, index = 1
Name = Wing1, index = 2
Name = trailingEdge, index = 3
Getting mesh sizing parameters
Mesh sizing name - Farfield
Done getting mesh sizing parameters
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Number of surface: nodes - 9601, elements - 19194
Getting volume mesh
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Done meshing using TetGen!
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Number of surface: nodes - 9601, elements - 19194
Getting volume mesh
Generating volume mesh using TetGen.....
Tetgen input string = pYq2.000/0.000QT1.00e-16A
Done meshing using TetGen!
EGADS Info: 0 Objects, 0 Reference in Use (of 0) at Close!
CAPS Info: Hit last success -- going live!
CAPS Info: Hit last success -- going live!
CAPS Info: Hit last success -- going live!
CAPS Info: Hit last success -- going live!
CAPS Info: Hit last success -- going live!
CAPS Info: Hit last success -- going live!
CAPS Info: Hit last success -- going live!
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 3
Name = Farfield, index = 1
Name = Wing1, index = 2
Name = trailingEdge, index = 3
Getting mesh sizing parameters
Mesh sizing name - Farfield
Done getting mesh sizing parameters
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Number of surface: nodes - 9601, elements - 19194
Getting volume mesh
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Done meshing using TetGen!
CAPS Info: Hit last success -- going live!
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 3
Name = Farfield, index = 1
Name = Wing1, index = 2
Name = trailingEdge, index = 3
Getting mesh sizing parameters
Mesh sizing name - Farfield
Done getting mesh sizing parameters
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
CAPS Info: Hit last success -- going live!
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 3
Name = Farfield, index = 1
Name = Wing1, index = 2
Name = trailingEdge, index = 3
Getting mesh sizing parameters
Mesh sizing name - Farfield
Done getting mesh sizing parameters
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
CAPS Info: Hit last success -- going live!
CAPS Info: Hit last success -- going live!
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 3
Name = Farfield, index = 1
Name = Wing1, index = 2
Name = trailingEdge, index = 3
Getting mesh sizing parameters
Mesh sizing name - Farfield
Done getting mesh sizing parameters
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Number of surface: nodes - 9601, elements - 19194
Getting volume mesh
Generating volume mesh using TetGen.....
Tetgen input string = pYq2.000/0.000QT1.00e-16A
Done meshing using TetGen!
CAPS Info: Hit last success -- going live!
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 3
Name = Farfield, index = 1
Name = Wing1, index = 2
Name = trailingEdge, index = 3
Getting mesh sizing parameters
Mesh sizing name - Farfield
Done getting mesh sizing parameters
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
ok
test_phase (test_tetgen.TestTETGEN.test_phase) ... Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 3
Name = Farfield, index = 1
Name = Wing1, index = 2
Name = trailingEdge, index = 3
Getting mesh sizing parameters
Mesh sizing name - Farfield
Done getting mesh sizing parameters
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Number of surface: nodes - 9601, elements - 19194
Getting volume mesh
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Done meshing using TetGen!
Writing TECPLOT file: test.dat ....
Finished writing TECPLOT file
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 3
Name = Farfield, index = 1
Name = Wing1, index = 2
Name = trailingEdge, index = 3
Getting mesh sizing parameters
Mesh sizing name - Farfield
Done getting mesh sizing parameters
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 3
Name = Farfield, index = 1
Name = Wing1, index = 2
Name = trailingEdge, index = 3
Getting mesh sizing parameters
Mesh sizing name - Farfield
Done getting mesh sizing parameters
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Number of surface: nodes - 7173, elements - 14338
Getting volume mesh
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Done meshing using TetGen!
Writing TECPLOT file: test.dat ....
Finished writing TECPLOT file
ok
test_reenter (test_tetgen.TestTETGEN.test_reenter) ... Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 3
Name = Farfield, index = 1
Name = Wing1, index = 2
Name = trailingEdge, index = 3
Getting mesh sizing parameters
Mesh sizing name - Farfield
Done getting mesh sizing parameters
Getting surface mesh for body 1 (of 1)
Body 1 (of 1)
Number of nodes = 9601
Number of elements = 19194
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 19194
Number of quadrilateral elements = 0
----------------------------
Total number of nodes = 9601
Total number of elements = 19194
Writing TECPLOT file: test.dat ....
Finished writing TECPLOT file
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Number of surface: nodes - 9601, elements - 19194
Getting volume mesh
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Done meshing using TetGen!
Writing TECPLOT file: test.dat ....
Finished writing TECPLOT file
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Number of surface: nodes - 9601, elements - 19194
Getting volume mesh
Generating volume mesh using TetGen.....
Tetgen input string = pYq2.000/0.000QT1.00e-16A
Done meshing using TetGen!
Writing TECPLOT file: test.dat ....
Finished writing TECPLOT file
ok
test_setInput (test_tetgen.TestTETGEN.test_setInput) ... EGADS Info: 0 Objects, 0 Reference in Use (of 0) at Close!
ok
test_Cl (test_xfoil.Testxfoil_Kulfan.test_Cl) ... ok
test_alpha_custom_increment (test_xfoil.Testxfoil_Kulfan.test_alpha_custom_increment) ... ok
test_CL_uniform_increment (test_xfoil.Testxfoil_NACA.test_CL_uniform_increment) ... ok
test_Cl (test_xfoil.Testxfoil_NACA.test_Cl) ... ok
test_alpha_custom_increment (test_xfoil.Testxfoil_NACA.test_alpha_custom_increment) ... ok
test_alpha_uniform_inrement (test_xfoil.Testxfoil_NACA.test_alpha_uniform_inrement) ... ok
test_append (test_xfoil.Testxfoil_NACA.test_append) ... ok
test_normalize (test_xfoil.Testxfoil_NACA.test_normalize) ... ok
test_phase (test_xfoil.Testxfoil_NACA.test_phase) ... ok
----------------------------------------------------------------------
Ran 137 tests in 621.177s
OK (skipped=15)
+ cd /Users/jenkins/workspace/ESP_Beta/7.8/DARWIN64/EngSketchPad/CAPSexamples/
+ make test TYPE=MINIMAL
(make -C cCAPS -f aeroelastic_SU2.make)
make[1]: `aeroelasticSimple_Iterative_SU2_and_MystranTest' is up to date.
(make -C cCAPS -f avlTest.make)
make[1]: `avlTest' is up to date.
(make -C cCAPS -f awaveTest.make)
make[1]: `awaveTest' is up to date.
(make -C cCAPS -f frictionTest.make)
make[1]: `frictionTest' is up to date.
(make -C cCAPS -f fun3d.make)
make[1]: Nothing to be done for `fun3d'.
(make -C cCAPS -f hsm.make)
make[1]: `hsm' is up to date.
(make -C cCAPS -f interferenceTest.make)
make[1]: `interferenceTest' is up to date.
(make -C cCAPS -f msesTest.make)
make[1]: `msesTest' is up to date.
(make -C cCAPS -f mystran.make)
make[1]: `mystranTest' is up to date.
(make -C cCAPS -f pointwiseTest.make)
make[1]: `pointwiseTest' is up to date.
(cd ./regressionTest; ./execute_CTestRegression.sh MINIMAL)
Running.... MINIMAL c-Tests
All tests pass!
=================================================
=================================================
(cd ./regressionTest; ./execute_PyTestRegression.sh MINIMAL)
=================================================
Using python : /Users/jenkins/workspace/ESP_Beta/7.8/DARWIN64/ESP_venv/bin/python
=================================================
Running.... MINIMAL PyTests
=================================================
+ echo 'avl_PyTest.py test;'
+ tee -a /Users/jenkins/workspace/ESP_Beta/7.8/DARWIN64/EngSketchPad/CAPSexamples/regressionTest/pyCAPSlog.txt
avl_PyTest.py test;
+ python -u avl_PyTest.py -outLevel=0
+ tee -a /Users/jenkins/workspace/ESP_Beta/7.8/DARWIN64/EngSketchPad/CAPSexamples/regressionTest/pyCAPSlog.txt
Loading AIM
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = Wing, index = 1
Getting vortex lattice surface data
VLM surface name - Wing
Done getting vortex lattice surface data
Writing surface - Wing (ID = 0)
Section 1 of 3 (ID = 0)
Section 2 of 3 (ID = 1)
Section 3 of 3 (ID = 2)
CXtot 0.0006119078685748102
CYtot -6.295467348382128e-15
CZtot -0.3012861394885953
Cltot -4.784258926526785e-14
Cmtot -0.1945055953450382
Cntot -2.338191252215186e-15
Cl'tot -4.787610967125373e-14
Cn'tot -1.502866821492718e-15
CLtot 0.3012509314150635
CDtot 0.004646353488232475
CDvis 0.0
CLff 0.3009503023520388
CYff -7.723329422293541e-15
CDind 0.004646353488232475
CDff 0.004968969500907922
e 0.9669902146157789
StripForces
Wing cl = [0.02994790451347, 0.08555545178933, 0.1329003532587, 0.1733025192695, 0.2100182422833, 0.2453427152547, 0.2792746996365, 0.3101221284189, 0.3355632628223, 0.3531618776075, 0.3603457261533, 0.3542128805664, 0.3542128805661, 0.3603457261533, 0.3531618776088, 0.3355632628252, 0.3101221284236, 0.2792746996427, 0.2453427152623, 0.2100182422921, 0.17330251928, 0.1329003532723, 0.08555545180787, 0.0299479045408]
Wing cd = [-0.004234137763162, -0.004494543653192, -0.003752887372724, -0.002739626801633, -0.001762021024326, -0.0007386538946409, 0.000511459807839, 0.0021191472861, 0.004145189908974, 0.006609094404181, 0.009540018987595, 0.01315518814708, 0.01315518814718, 0.009540018987792, 0.006609094404439, 0.00414518990926, 0.002119147286384, 0.0005114598080993, -0.0007386538944077, -0.001762021024096, -0.002739626801367, -0.003752887372445, -0.004494543653162, -0.004234137764545]
real 0m5.645s
user 0m1.425s
sys 0m0.953s
+ status=0
+ set +x
=================================================
CAPS verification (using pyCAPS) case avl_PyTest.py passed (as expected)
=================================================
=================================================
+ tee -a /Users/jenkins/workspace/ESP_Beta/7.8/DARWIN64/EngSketchPad/CAPSexamples/regressionTest/pyCAPSlog.txt
+ echo 'xfoil_PyTest.py test;'
xfoil_PyTest.py test;
+ python -u xfoil_PyTest.py -outLevel=0 -noPlotData
+ tee -a /Users/jenkins/workspace/ESP_Beta/7.8/DARWIN64/EngSketchPad/CAPSexamples/regressionTest/pyCAPSlog.txt
Cl = [1.05475230553347, 1.36488869373699, 1.5660721427216, 2.03059709348412, 1.97271083121139, 1.87307153172667, 1.7605047576018]
Cd = [0.0131991208677172, 0.0166540240605863, 0.0200551482562954, 0.0458671341943513, 0.07542560093961, 0.099446917447585, 0.127479430989108]
Alpha = [0.0, 3.0, 5.0, 11.0, 13.0, 14.0, 15.0]
Transition location = [0.496044115314418, 0.46137773204142, 0.442376568201556, 0.361251636297643, 0.276104140853528, 0.214381239319783, 0.132988264746104]
real 0m9.722s
user 0m8.834s
sys 0m0.807s
+ status=0
+ set +x
=================================================
CAPS verification (using pyCAPS) case xfoil_PyTest.py passed (as expected)
=================================================
=================================================
+ echo 'mses_PyTest.py test;'
+ tee -a /Users/jenkins/workspace/ESP_Beta/7.8/DARWIN64/EngSketchPad/CAPSexamples/regressionTest/pyCAPSlog.txt
mses_PyTest.py test;
+ python -u mses_PyTest.py -outLevel=0 -noPlotData
+ tee -a /Users/jenkins/workspace/ESP_Beta/7.8/DARWIN64/EngSketchPad/CAPSexamples/regressionTest/pyCAPSlog.txt
Cl = 0.37837932402995744
Cd = 0.0077758580442312715
Cm = 0.005262576090327783
real 0m7.580s
user 0m5.953s
sys 0m0.777s
+ status=0
+ set +x
=================================================
CAPS verification (using pyCAPS) case mses_PyTest.py passed (as expected)
=================================================
=================================================
+ echo 'friction_PyTest.py test;'
+ tee -a /Users/jenkins/workspace/ESP_Beta/7.8/DARWIN64/EngSketchPad/CAPSexamples/regressionTest/pyCAPSlog.txt
friction_PyTest.py test;
+ python -u friction_PyTest.py -outLevel=0
+ tee -a /Users/jenkins/workspace/ESP_Beta/7.8/DARWIN64/EngSketchPad/CAPSexamples/regressionTest/pyCAPSlog.txt
Loading AIM
Setting Mach & Altitude Values
Lifting Surface: Body = 1, units m
XLE: 1.571946 -3.872983 0.249728
XTE: 2.536563 -3.872983 0.335335
Chord: 0.968408
Arc: 1.985181
T/C: 0.155975
Type: Wing
Lifting Surface: Body = 2, units m
XLE: 0.000000 0.000000 0.000000
XTE: 1.614012 0.000000 0.002015
Chord: 1.614013
Arc: 3.308635
T/C: 0.127839
Type: Wing
Lifting Surface: Body = 3, units m
XLE: 1.571946 3.872983 0.249728
XTE: 2.536563 3.872983 0.335335
Chord: 0.968408
Arc: 1.985181
T/C: 0.155975
Type: Wing
Lifting Surface: Body = 4, units m
XLE: 5.484123 0.000000 1.468246
XTE: 6.210307 0.000915 1.468246
Chord: 0.726185
Arc: 1.482717
T/C: 0.120035
Type: VTail
Lifting Surface: Body = 5, units m
XLE: 5.000000 0.000000 0.500000
XTE: 6.210307 0.001525 0.500000
Chord: 1.210308
Arc: 2.471195
T/C: 0.120035
Type: VTail
Lifting Surface: Body = 6, units m
XLE: 5.484123 -0.968246 0.500000
XTE: 6.210307 -0.968246 0.500915
Chord: 0.726185
Arc: 1.482717
T/C: 0.120035
Type: HTail
Lifting Surface: Body = 7, units m
XLE: 5.484123 0.968246 0.500000
XTE: 6.210307 0.968246 0.500915
Chord: 0.726185
Arc: 1.482717
T/C: 0.120035
Type: HTail
Body of Revolution: Body = 8, units m
Arc: 0.000000
Diameter: 0.000000
Type: Fuse
Body of Revolution: Body = 9, units m
Arc: 3.714180
Diameter: 1.020621
Type: Fuse
Body of Revolution: Body = 10, units m
Arc: 2.771209
Diameter: 0.645497
Type: Fuse
Body of Revolution: Body = 11, units m
Arc: 1.013945
Diameter: 0.322749
Type: Fuse
Body of Revolution: Body = 12, units m
Arc: 0.101394
Diameter: 0.032275
Type: Fuse
Number of sections 4, number of revolution sections 1
Number of Mach-Altitude cases = 2
Total drag = [0.0132, 0.01226]
Form drag = [0.0033, 0.00307]
Friction drag = [0.0099, 0.00919]
real 0m2.539s
user 0m1.209s
sys 0m0.452s
+ status=0
+ set +x
=================================================
CAPS verification (using pyCAPS) case friction_PyTest.py passed (as expected)
=================================================
=================================================
+ echo 'tsfoil_PyTest.py test;'
+ tee -a /Users/jenkins/workspace/ESP_Beta/7.8/DARWIN64/EngSketchPad/CAPSexamples/regressionTest/pyCAPSlog.txt
tsfoil_PyTest.py test;
+ python -u tsfoil_PyTest.py -outLevel=0
+ tee -a /Users/jenkins/workspace/ESP_Beta/7.8/DARWIN64/EngSketchPad/CAPSexamples/regressionTest/pyCAPSlog.txt
Getting results
PAUSE Press the ENTER key to exit
To resume execution, type go. Other input will terminate the job.
Cl = 0.933417
Cd = 0.000284
Cd Wave = 0.0
Cm = -0.203436
Cp _Critcal = -1.303869
real 0m2.473s
user 0m1.313s
sys 0m0.501s
+ status=0
+ set +x
=================================================
CAPS verification (using pyCAPS) case tsfoil_PyTest.py passed (as expected)
=================================================
=================================================
+ echo 'delaundo_PyTest.py test;'
+ tee -a /Users/jenkins/workspace/ESP_Beta/7.8/DARWIN64/EngSketchPad/CAPSexamples/regressionTest/pyCAPSlog.txt
delaundo_PyTest.py test;
+ python -u delaundo_PyTest.py -outLevel=0
+ tee -a /Users/jenkins/workspace/ESP_Beta/7.8/DARWIN64/EngSketchPad/CAPSexamples/regressionTest/pyCAPSlog.txt
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 6
Name = 2DSlice, index = 1
Name = TunnelWall, index = 2
Name = OutFlow, index = 3
Name = InFlow, index = 4
Name = Airfoil, index = 5
Name = AirfoilTE, index = 6
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 6
Name = 2DSlice, index = 1
Name = TunnelWall, index = 2
Name = OutFlow, index = 3
Name = InFlow, index = 4
Name = Airfoil, index = 5
Name = AirfoilTE, index = 6
Getting mesh sizing parameters
Mesh sizing name - Airfoil
Mesh sizing name - AirfoilTE
Mesh sizing name - InFlow
Mesh sizing name - OutFlow
Mesh sizing name - TunnelWall
Done getting mesh sizing parameters
Getting edge discretization for body 1
Delaundo expects 2D meshes be in the x-y plane... attempting to rotate mesh through node swapping!
Swapping z and y coordinates!
Writing delaundo control file - delaundo.ctr
Writing out *.pts file
Reading delaundo mesh file - delaundoMesh.mesh
Swapping y and z coordinates!
Writing TECPLOT file: delaundoMesh.dat ....
Finished writing TECPLOT file
real 0m2.912s
user 0m1.806s
sys 0m0.807s
+ status=0
+ set +x
=================================================
CAPS verification (using pyCAPS) case delaundo_PyTest.py passed (as expected)
=================================================
=================================================
+ echo 'egadsTess_PyTest.py test;'
+ tee -a /Users/jenkins/workspace/ESP_Beta/7.8/DARWIN64/EngSketchPad/CAPSexamples/regressionTest/pyCAPSlog.txt
egadsTess_PyTest.py test;
+ python -u egadsTess_PyTest.py -outLevel=0
+ tee -a /Users/jenkins/workspace/ESP_Beta/7.8/DARWIN64/EngSketchPad/CAPSexamples/regressionTest/pyCAPSlog.txt
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 7
Name = Ribs, index = 1
Name = Skin, index = 2
Name = Spar1, index = 3
Name = Rib_Root, index = 4
Name = Spar2, index = 5
Name = Rib_Root_Point, index = 6
Name = Wing, index = 7
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 2
Name = LeadingEdge, index = 1
Name = TrailingEdge, index = 2
Getting mesh sizing parameters
Mesh sizing name - LeadingEdge
Done getting mesh sizing parameters
Getting surface mesh for body 1 (of 4)
Getting surface mesh for body 2 (of 4)
Getting surface mesh for body 3 (of 4)
Getting surface mesh for body 4 (of 4)
Body 1 (of 4)
Number of nodes = 3793
Number of elements = 4001
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 0
Number of quadrilateral elements = 4001
Body 2 (of 4)
Number of nodes = 1
Number of elements = 1
Number of node elements = 1
Number of line elements = 0
Number of triangle elements = 0
Number of quadrilateral elements = 0
Warning: No capsGroup/capsIgnore attribute found on edge 1 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 2 of face 1, unable to assign a boundary index value
Body 3 (of 4)
Number of nodes = 76
Number of elements = 55
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 0
Number of quadrilateral elements = 55
Warning: No capsGroup/capsIgnore attribute found on edge 1 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 2 of face 1, unable to assign a boundary index value
Body 4 (of 4)
Number of nodes = 100
Number of elements = 73
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 0
Number of quadrilateral elements = 73
----------------------------
Total number of nodes = 3970
Total number of elements = 4130
Writing TECPLOT file: egadsTessMesh_Surf_0.dat ....
Finished writing TECPLOT file
Writing TECPLOT file: egadsTessMesh_Surf_1.dat ....
Finished writing TECPLOT file
Writing TECPLOT file: egadsTessMesh_Surf_2.dat ....
Finished writing TECPLOT file
Writing TECPLOT file: egadsTessMesh_Surf_3.dat ....
Finished writing TECPLOT file
real 0m18.986s
user 0m31.791s
sys 0m3.951s
+ status=0
+ set +x
=================================================
CAPS verification (using pyCAPS) case egadsTess_PyTest.py passed (as expected)
=================================================
=================================================
+ echo 'aflr2_PyTest.py test;'
+ tee -a /Users/jenkins/workspace/ESP_Beta/7.8/DARWIN64/EngSketchPad/CAPSexamples/regressionTest/pyCAPSlog.txt
aflr2_PyTest.py test;
+ tee -a /Users/jenkins/workspace/ESP_Beta/7.8/DARWIN64/EngSketchPad/CAPSexamples/regressionTest/pyCAPSlog.txt
+ python -u aflr2_PyTest.py -outLevel=0
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 5
Name = 2DSlice, index = 1
Name = TunnelWall, index = 2
Name = OutFlow, index = 3
Name = InFlow, index = 4
Name = Airfoil, index = 5
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 4
Name = TunnelWall, index = 1
Name = OutFlow, index = 2
Name = InFlow, index = 3
Name = Airfoil, index = 4
Getting mesh sizing parameters
Mesh sizing name - 2DSlice
Mesh sizing name - Airfoil
Mesh sizing name - InFlow
Mesh sizing name - OutFlow
Mesh sizing name - TunnelWall
Done getting mesh sizing parameters
Getting 2D mesh for body 1 (of 1)
AFLR2 : ---------------------------------------
AFLR2 : AFLR2 LIBRARY
AFLR2 : ADVANCING-FRONT/LOCAL-RECONNECTION
AFLR2 : TRIA/QUAD GRID GENERATOR
AFLR2 : Version Number 9.14.7
AFLR2 : Version Date 07/16/23 @ 01:42PM
AFLR2 : Compile OS Darwin 22.5.0 x86_64
AFLR2 : Compile Date 07/25/23 @ 11:59AM
AFLR2 : Copyright 1994-2021, D.L. Marcum
AFLR2 : ---------------------------------------
AFLR2 IC : INPUT DATA CHECK
AFLR2 IC : Nodes, Faces = 344 0
AFLR2 : CPU Time = 0.000 seconds
AFLR2 EG : EDGE GRID RE-GENERATION
AFLR2 EG : Nodes, Edges = 344 344
AFLR2 : CPU Time = 0.000 seconds
AFLR2 IG : INITIAL GRID GENERATION
AFLR2 IG : Nodes, Faces = 0 2
AFLR2 IG : Nodes, Faces = 70 142
AFLR2 IG : Nodes, Faces = 140 282
AFLR2 IG : Nodes, Faces = 210 422
AFLR2 IG : Nodes, Faces = 280 562
AFLR2 IG : Nodes, Faces = 316 634
AFLR2 IG : Nodes, Faces = 344 690
AFLR2 IG : Nodes, Faces = 348 690
AFLR2 IG : Nodes, Faces = 344 344
AFLR2 : CPU Time = 0.001 seconds
AFLR2 GG : FIELD GRID GENERATION
AFLR2 GGp: Nodes, Faces = 344 344
AFLR2 GGp: Nodes, Faces = 681 1018
AFLR2 GGp: Nodes, Faces = 1013 1682
AFLR2 GGp: Nodes, Faces = 1339 2334
AFLR2 GGp: Nodes, Faces = 1652 2960
AFLR2 GGp: Nodes, Faces = 1957 3570
AFLR2 GGp: Nodes, Faces = 2252 4160
AFLR2 GGp: Nodes, Faces = 2526 4708
AFLR2 GGp: Nodes, Faces = 2809 5274
AFLR2 GGp: Nodes, Faces = 3083 5822
AFLR2 GGp: Nodes, Faces = 3327 6310
AFLR2 GGp: Nodes, Faces = 3564 6784
AFLR2 GGp: Nodes, Faces = 3788 7232
AFLR2 GGp: Nodes, Faces = 3995 7646
AFLR2 GGp: Nodes, Faces = 4194 8044
AFLR2 GGp: Nodes, Faces = 4394 8444
AFLR2 GGp: Nodes, Faces = 4585 8826
AFLR2 GGp: Nodes, Faces = 4772 9200
AFLR2 GGp: Nodes, Faces = 4943 9542
AFLR2 GGp: Nodes, Faces = 5129 9914
AFLR2 GGp: Nodes, Faces = 5293 10242
AFLR2 GGp: Nodes, Faces = 5447 10550
AFLR2 GGp: Nodes, Faces = 5594 10844
AFLR2 GGp: Nodes, Faces = 5716 11088
AFLR2 GGp: Nodes, Faces = 5830 11316
AFLR2 GGp: Nodes, Faces = 5909 11474
AFLR2 GGp: Nodes, Faces = 5964 11584
AFLR2 GGp: Nodes, Faces = 6006 11668
AFLR2 GGp: Nodes, Faces = 6025 11706
AFLR2 GGp: Nodes, Faces = 6034 11724
AFLR2 : CPU Time = 0.022 seconds
AFLR2 QI : QUALITY IMPROVEMENT
AFLR2 QI : Nodes, Faces = 6034 11724
AFLR2 QI : Nodes, Faces = 6033 454
AFLR2 QI : Nodes, Faces = 6033 5634
AFLR2 QI : Nodes, Faces = 6033 11722
AFLR2 QI : Nodes, Faces = 6032 462
AFLR2 QI : Nodes, Faces = 6032 5629
AFLR2 QI : Nodes, Faces = 6032 11720
AFLR2 QI : Nodes, Faces = 6032 456
AFLR2 QI : Nodes, Faces = 6032 5632
AFLR2 QI : Nodes, Faces = 6032 11720
AFLR2 QI : Nodes, Faces = 6032 474
AFLR2 QI : Nodes, Faces = 6032 5623
AFLR2 QI : Nodes, Faces = 6032 11720
AFLR2 QI : Nodes, Faces = 6031 486
AFLR2 QI : Nodes, Faces = 6031 5616
AFLR2 QI : Nodes, Faces = 6031 488
AFLR2 QI : Nodes, Faces = 6031 5616
AFLR2 : CPU Time = 0.010 seconds
AFLR2 : DONE
EGADS Internal: Face 1, Side 4741 4722 complete [but 7915] (EG_makeConnect)!
EGADS Internal: Face 1, Side 4741 4912 complete [but 7916] (EG_makeConnect)!
EGADS Internal: Face 1, Side 5850 5858 complete [but 8742] (EG_makeConnect)!
EGADS Internal: Face 1, Side 5850 5851 complete [but 8742] (EG_makeConnect)!
EGADS Internal: Face 1, Side 5858 5851 complete [but 8791] (EG_makeConnect)!
EGADS Internal: Face 1, Side 4912 4722 complete [but 9417] (EG_makeConnect)!
Writing AFLR3 file ....
Finished writing AFLR3 file
Number of nodes = 6031
Number of elements = 6448
Number of tris = 488
Number of quad = 5616
Writing TECPLOT file: pyCAPS_AFLR2_Test.dat ....
Finished writing TECPLOT file
EGADS Internal: Face 1, Side 4741 4722 complete [but 7915] (EG_makeConnect)!
EGADS Internal: Face 1, Side 4741 4912 complete [but 7916] (EG_makeConnect)!
EGADS Internal: Face 1, Side 5850 5858 complete [but 8742] (EG_makeConnect)!
EGADS Internal: Face 1, Side 5850 5851 complete [but 8742] (EG_makeConnect)!
EGADS Internal: Face 1, Side 5858 5851 complete [but 8791] (EG_makeConnect)!
EGADS Internal: Face 1, Side 4912 4722 complete [but 9417] (EG_makeConnect)!
EGADS Internal: Face 1, Side 4741 4722 complete [but 7915] (EG_makeConnect)!
EGADS Internal: Face 1, Side 4741 4912 complete [but 7916] (EG_makeConnect)!
EGADS Internal: Face 1, Side 5850 5858 complete [but 8742] (EG_makeConnect)!
EGADS Internal: Face 1, Side 5850 5851 complete [but 8742] (EG_makeConnect)!
EGADS Internal: Face 1, Side 5858 5851 complete [but 8791] (EG_makeConnect)!
EGADS Internal: Face 1, Side 4912 4722 complete [but 9417] (EG_makeConnect)!
real 0m2.438s
user 0m1.362s
sys 0m0.473s
+ status=0
+ set +x
=================================================
CAPS verification (using pyCAPS) case aflr2_PyTest.py passed (as expected)
=================================================
=================================================
+ echo 'aflr4_and_aflr3_PyTest.py test;'
+ tee -a /Users/jenkins/workspace/ESP_Beta/7.8/DARWIN64/EngSketchPad/CAPSexamples/regressionTest/pyCAPSlog.txt
aflr4_and_aflr3_PyTest.py test;
+ python -u aflr4_and_aflr3_PyTest.py -outLevel=0
+ tee -a /Users/jenkins/workspace/ESP_Beta/7.8/DARWIN64/EngSketchPad/CAPSexamples/regressionTest/pyCAPSlog.txt
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 4
Name = Wing1, index = 1
Name = Wing2, index = 2
Name = Wake, index = 3
Name = Farfield, index = 4
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 4
Name = Wing1, index = 1
Name = Wing2, index = 2
Name = Wake, index = 3
Name = Farfield, index = 4
AFLR4 : Proximity BG Surface Grid Generation Skipped
AFLR4 : No Modifications Required
Warning: No capsGroup/capsIgnore attribute found on edge 1 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 2 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 3 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 4 of face 1, unable to assign a boundary index value
Writing TECPLOT file: pyCAPS_AFLR4_AFLR3.dat ....
Finished writing TECPLOT file
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 4
Name = Wing1, index = 1
Name = Wing2, index = 2
Name = Wake, index = 3
Name = Farfield, index = 4
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 4
Name = Wing1, index = 1
Name = Wing2, index = 2
Name = Wake, index = 3
Name = Farfield, index = 4
Getting mesh sizing parameters
Mesh sizing name - Wing1
Mesh sizing name - Wing2
Done getting mesh sizing parameters
Getting volume mesh
AFLR2 : ---------------------------------------
AFLR2 : AFLR2 LIBRARY
AFLR2 : ADVANCING-FRONT/LOCAL-RECONNECTION
AFLR2 : TRIA/QUAD GRID GENERATOR
AFLR2 : Version Number 9.14.7
AFLR2 : Version Date 07/16/23 @ 01:42PM
AFLR2 : Compile OS Darwin 22.5.0 x86_64
AFLR2 : Compile Date 07/25/23 @ 11:59AM
AFLR2 : Copyright 1994-2021, D.L. Marcum
AFLR2 : ---------------------------------------
AFLR4 : ---------------------------------------
AFLR4 : AFLR4 LIBRARY
AFLR4 : ADVANCING-FRONT/LOCAL-RECONNECTION
AFLR4 : TRIA/QUAD SURFACE GRID GENERATOR
AFLR4 : Version Number 11.5.9
AFLR4 : Version Date 08/14/23 @ 12:27AM
AFLR4 : Compile OS Darwin 22.5.0 x86_64
AFLR4 : Compile Date 08/14/23 @ 01:13PM
AFLR4 : Copyright 1994-2021, D.L. Marcum
AFLR4 : ---------------------------------------
EGADS : ---------------------------------------
EGADS : Engineering Geometry Aircraft Design System
EGADS : Version 1.25
EGADS : OpenCASCADE Version 7.8.0
EGADS : ---------------------------------------
EGADS : ---------------------------------------
EGADS : Engineering Geometry Aircraft Design System
EGADS : Version 1.25
EGADS : OpenCASCADE Version 7.8.0
EGADS : ---------------------------------------
Volume mesh:
Number of nodes = 150173
Number of elements = 449915
Number of triangles = 14380
Number of quadrilatarals = 0
Number of tetrahedrals = 214483
Number of pyramids = 425
Number of prisms = 220627
Number of hexahedrals = 0
Writing TECPLOT file: pyCAPS_AFLR4_AFLR3_VolMesh.dat ....
Finished writing TECPLOT file
real 0m21.669s
user 0m19.573s
sys 0m1.004s
+ status=0
+ set +x
=================================================
CAPS verification (using pyCAPS) case aflr4_and_aflr3_PyTest.py passed (as expected)
=================================================
=================================================
+ echo 'tetgen_PyTest.py test;'
+ tee -a /Users/jenkins/workspace/ESP_Beta/7.8/DARWIN64/EngSketchPad/CAPSexamples/regressionTest/pyCAPSlog.txt
tetgen_PyTest.py test;
+ python -u tetgen_PyTest.py -outLevel=0
+ tee -a /Users/jenkins/workspace/ESP_Beta/7.8/DARWIN64/EngSketchPad/CAPSexamples/regressionTest/pyCAPSlog.txt
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 3
Name = Wing1, index = 1
Name = Wing2, index = 2
Name = Farfield, index = 3
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 3
Name = Wing1, index = 1
Name = Wing2, index = 2
Name = Farfield, index = 3
Getting surface mesh for body 1 (of 3)
Getting surface mesh for body 2 (of 3)
Getting surface mesh for body 3 (of 3)
Body 1 (of 3)
Number of nodes = 2236
Number of elements = 4468
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 4468
Number of quadrilateral elements = 0
Body 2 (of 3)
Number of nodes = 636
Number of elements = 1268
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 1268
Number of quadrilateral elements = 0
Body 3 (of 3)
Number of nodes = 267
Number of elements = 530
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 530
Number of quadrilateral elements = 0
----------------------------
Total number of nodes = 3139
Total number of elements = 6266
Writing TECPLOT file: egadsTessMesh_Surf_0.dat ....
Finished writing TECPLOT file
Writing TECPLOT file: egadsTessMesh_Surf_1.dat ....
Finished writing TECPLOT file
Writing TECPLOT file: egadsTessMesh_Surf_2.dat ....
Finished writing TECPLOT file
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 3
Name = Wing1, index = 1
Name = Wing2, index = 2
Name = Farfield, index = 3
Number of surface: nodes - 3139, elements - 6266
Getting volume mesh
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.036933
Creating surface mesh ...
Surface mesh seconds: 0.011604
Recovering boundaries...
Boundary recovery seconds: 0.131608
Removing exterior tetrahedra ...
Spreading region attributes.
Exterior tets removal seconds: 0.02189
Suppressing Steiner points ...
Steiner suppression seconds: 4.5e-05
Recovering Delaunayness...
Delaunay recovery seconds: 0.018785
Refining mesh...
4188 insertions, added 2137 points, 127272 tetrahedra in queue.
1394 insertions, added 414 points, 131442 tetrahedra in queue.
1858 insertions, added 464 points, 129858 tetrahedra in queue.
2477 insertions, added 450 points, 111812 tetrahedra in queue.
3302 insertions, added 490 points, 67833 tetrahedra in queue.
4401 insertions, added 401 points, 112 tetrahedra in queue.
Refinement seconds: 1.24235
Smoothing vertices...
Mesh smoothing seconds: 0.947711
Improving mesh...
Mesh improvement seconds: 0.021121
Jettisoning redundant points.
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.005799
Total running seconds: 2.43828
Statistics:
Input points: 3139
Input facets: 6266
Input segments: 9399
Input holes: 2
Input regions: 0
Mesh points: 7895
Mesh tetrahedra: 38676
Mesh faces: 80485
Mesh faces on exterior boundary: 6266
Mesh faces on input facets: 6266
Mesh edges on input segments: 9399
Steiner points inside domain: 4756
Done meshing using TetGen!
Writing TECPLOT file: pyCAPS_Tetgen_Test.dat ....
Binary output is not currently supported for Tecplot output
..... switching to ASCII!
Finished writing TECPLOT file
real 0m10.188s
user 0m9.852s
sys 0m0.582s
+ status=0
+ set +x
=================================================
CAPS verification (using pyCAPS) case tetgen_PyTest.py passed (as expected)
=================================================
=================================================
+ echo 'su2_and_AFLR2_PyTest.py test;'
+ tee -a /Users/jenkins/workspace/ESP_Beta/7.8/DARWIN64/EngSketchPad/CAPSexamples/regressionTest/pyCAPSlog.txt
su2_and_AFLR2_PyTest.py test;
+ python -u su2_and_AFLR2_PyTest.py -outLevel=0
+ tee -a /Users/jenkins/workspace/ESP_Beta/7.8/DARWIN64/EngSketchPad/CAPSexamples/regressionTest/pyCAPSlog.txt
Saving geometry
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 5
Name = 2DSlice, index = 1
Name = TunnelWall, index = 2
Name = OutFlow, index = 3
Name = InFlow, index = 4
Name = Airfoil, index = 5
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 4
Name = TunnelWall, index = 1
Name = OutFlow, index = 2
Name = InFlow, index = 3
Name = Airfoil, index = 4
Getting mesh sizing parameters
Mesh sizing name - 2DSlice
Mesh sizing name - Airfoil
Mesh sizing name - InFlow
Mesh sizing name - OutFlow
Mesh sizing name - TunnelWall
Done getting mesh sizing parameters
Getting 2D mesh for body 1 (of 1)
AFLR2 : ---------------------------------------
AFLR2 : AFLR2 LIBRARY
AFLR2 : ADVANCING-FRONT/LOCAL-RECONNECTION
AFLR2 : TRIA/QUAD GRID GENERATOR
AFLR2 : Version Number 9.14.7
AFLR2 : Version Date 07/16/23 @ 01:42PM
AFLR2 : Compile OS Darwin 22.5.0 x86_64
AFLR2 : Compile Date 07/25/23 @ 11:59AM
AFLR2 : Copyright 1994-2021, D.L. Marcum
AFLR2 : ---------------------------------------
AFLR2 IC : INPUT DATA CHECK
AFLR2 IC : Nodes, Faces = 545 0
AFLR2 : CPU Time = 0.000 seconds
AFLR2 EG : EDGE GRID RE-GENERATION
AFLR2 EG : Nodes, Edges = 545 545
AFLR2 : CPU Time = 0.000 seconds
AFLR2 IG : INITIAL GRID GENERATION
AFLR2 IG : Nodes, Faces = 0 2
AFLR2 IG : Nodes, Faces = 110 222
AFLR2 IG : Nodes, Faces = 220 442
AFLR2 IG : Nodes, Faces = 330 662
AFLR2 IG : Nodes, Faces = 440 882
AFLR2 IG : Nodes, Faces = 517 1036
AFLR2 IG : Nodes, Faces = 545 1092
AFLR2 IG : Nodes, Faces = 549 1092
AFLR2 IG : Nodes, Faces = 545 545
AFLR2 : CPU Time = 0.003 seconds
AFLR2 GG : FIELD GRID GENERATION
AFLR2 GGp: Nodes, Faces = 545 545
AFLR2 GGp: Nodes, Faces = 1083 1621
AFLR2 GGp: Nodes, Faces = 1616 2687
AFLR2 GGp: Nodes, Faces = 2144 3743
AFLR2 GGp: Nodes, Faces = 2661 4777
AFLR2 GGp: Nodes, Faces = 3171 5797
AFLR2 GGp: Nodes, Faces = 3672 6799
AFLR2 GGp: Nodes, Faces = 4158 7771
AFLR2 GGp: Nodes, Faces = 4653 8761
AFLR2 GGp: Nodes, Faces = 5142 9739
AFLR2 GGp: Nodes, Faces = 5608 10671
AFLR2 GGp: Nodes, Faces = 6055 11565
AFLR2 GGp: Nodes, Faces = 6482 12419
AFLR2 GGp: Nodes, Faces = 6880 13215
AFLR2 GGp: Nodes, Faces = 7257 13969
AFLR2 GGp: Nodes, Faces = 7614 14683
AFLR2 GGp: Nodes, Faces = 7947 15349
AFLR2 GGp: Nodes, Faces = 8276 16007
AFLR2 GGp: Nodes, Faces = 8575 16605
AFLR2 GGp: Nodes, Faces = 8869 17193
AFLR2 GGp: Nodes, Faces = 9140 17735
AFLR2 GGp: Nodes, Faces = 9401 18257
AFLR2 GGp: Nodes, Faces = 9654 18763
AFLR2 GGp: Nodes, Faces = 9887 19229
AFLR2 GGp: Nodes, Faces = 10110 19675
AFLR2 GGp: Nodes, Faces = 10315 20085
AFLR2 GGp: Nodes, Faces = 10497 20449
AFLR2 GGp: Nodes, Faces = 10656 20767
AFLR2 GGp: Nodes, Faces = 10791 21037
AFLR2 GGp: Nodes, Faces = 10919 21293
AFLR2 GGp: Nodes, Faces = 11022 21499
AFLR2 GGp: Nodes, Faces = 11092 21639
AFLR2 GGp: Nodes, Faces = 11145 21745
AFLR2 GGp: Nodes, Faces = 11156 21767
AFLR2 : CPU Time = 0.052 seconds
AFLR2 QI : QUALITY IMPROVEMENT
AFLR2 QI : Nodes, Faces = 11156 21767
AFLR2 QI : Nodes, Faces = 11155 819
AFLR2 QI : Nodes, Faces = 11155 10473
AFLR2 QI : Nodes, Faces = 11155 21765
AFLR2 QI : Nodes, Faces = 11154 811
AFLR2 QI : Nodes, Faces = 11154 10476
AFLR2 QI : Nodes, Faces = 11154 21763
AFLR2 QI : Nodes, Faces = 11154 805
AFLR2 QI : Nodes, Faces = 11154 10479
AFLR2 QI : Nodes, Faces = 11154 21763
AFLR2 QI : Nodes, Faces = 11154 911
AFLR2 QI : Nodes, Faces = 11154 10426
AFLR2 QI : Nodes, Faces = 11154 21763
AFLR2 QI : Nodes, Faces = 11153 915
AFLR2 QI : Nodes, Faces = 11153 10423
AFLR2 QI : Nodes, Faces = 11153 917
AFLR2 QI : Nodes, Faces = 11153 10423
AFLR2 : CPU Time = 0.022 seconds
AFLR2 : DONE
EGADS Internal: Face 1, Side 11077 11153 complete [but 18248] (EG_makeConnect)!
EGADS Internal: Face 1, Side 10985 11077 complete [but 18248] (EG_makeConnect)!
EGADS Internal: Face 1, Side 10985 11152 complete [but 18249] (EG_makeConnect)!
EGADS Internal: Face 1, Side 11152 11153 complete [but 19022] (EG_makeConnect)!
Writing AFLR3 file ....
Finished writing AFLR3 file
Number of nodes = 11153
Number of elements = 11885
Number of tris = 917
Number of quad = 10423
Writing TECPLOT file: pyCAPS_su2_aflr2.dat ....
Finished writing TECPLOT file
EGADS Internal: Face 1, Side 11077 11153 complete [but 18248] (EG_makeConnect)!
EGADS Internal: Face 1, Side 10985 11077 complete [but 18248] (EG_makeConnect)!
EGADS Internal: Face 1, Side 10985 11152 complete [but 18249] (EG_makeConnect)!
EGADS Internal: Face 1, Side 11152 11153 complete [but 19022] (EG_makeConnect)!
EGADS Internal: Face 1, Side 11077 11153 complete [but 18248] (EG_makeConnect)!
EGADS Internal: Face 1, Side 10985 11077 complete [but 18248] (EG_makeConnect)!
EGADS Internal: Face 1, Side 10985 11152 complete [but 18249] (EG_makeConnect)!
EGADS Internal: Face 1, Side 11152 11153 complete [but 19022] (EG_makeConnect)!
Writing SU2 file ....
SU2 expects 2D meshes be in the x-y plane... attempting to rotate mesh!
Swapping z and y coordinates!
Finished writing SU2 file
Getting CFD boundary conditions
Boundary condition name - Airfoil
Boundary condition name - InFlow
Boundary condition name - OutFlow
Boundary condition name - TunnelWall
Done getting CFD boundary conditions
Warning: The su2 cfg file will be overwritten!
Write SU2 configuration file for version "Harrier (8.0.0) "
Running SU2......
-------------------------------------------------------------------------
| ___ _ _ ___ |
| / __| | | |_ ) Release 8.0.0 "Harrier" |
| \__ \ |_| |/ / |
| |___/\___//___| Suite (Computational Fluid Dynamics Code) |
| |
-------------------------------------------------------------------------
| SU2 Project Website: https://su2code.github.io |
| |
| The SU2 Project is maintained by the SU2 Foundation |
| (http://su2foundation.org) |
-------------------------------------------------------------------------
| Copyright 2012-2023, SU2 Contributors |
| |
| SU2 is free software; you can redistribute it and/or |
| modify it under the terms of the GNU Lesser General Public |
| License as published by the Free Software Foundation; either |
| version 2.1 of the License, or (at your option) any later version. |
| |
| SU2 is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| Lesser General Public License for more details. |
| |
| You should have received a copy of the GNU Lesser General Public |
| License along with SU2. If not, see <http://www.gnu.org/licenses/>. |
-------------------------------------------------------------------------
Parsing config file for zone 0
----------------- Physical Case Definition ( Zone 0 ) -------------------
Compressible Euler equations.
Mach number: 0.4.
Angle of attack (AoA): 0 deg, and angle of sideslip (AoS): 0 deg.
No restart solution, use the values at infinity (freestream).
Dimensional simulation.
The reference area is 1 m^2.
The semi-span will be computed using the max y(3D) value.
The reference length is 1 m.
Reference origin for moment evaluation is (0, 0, 0).
Surface(s) where the force coefficients are evaluated: BC_5.
Surface(s) plotted in the output file: BC_5, BC_2.
Input mesh file name: ../aflr2/aflr2.su2
--------------- Space Numerical Integration ( Zone 0 ) ------------------
Roe (with entropy fix = 0.001) solver for the flow inviscid terms.
Standard Roe without low-dissipation function.
Second order integration in space, with slope limiter.
Venkatakrishnan slope-limiting method, with constant: 0.05.
The reference element size is: 1.
Gradient for upwind reconstruction: inverse-distance weighted Least-Squares.
Gradient for viscous and source terms: inverse-distance weighted Least-Squares.
--------------- Time Numerical Integration ( Zone 0 ) ------------------
Local time stepping (steady state simulation).
Euler implicit method for the flow equations.
FGMRES is used for solving the linear system.
Using a ILU(0) preconditioning.
Convergence criteria of the linear solver: 1e-06.
Max number of linear iterations: 10.
V Multigrid Cycle, with 2 multigrid levels.
Damping factor for the residual restriction: 0.75.
Damping factor for the correction prolongation: 0.75.
No CFL adaptation.
+-------------------------------------------+
| MG Level| Presmooth|PostSmooth|CorrectSmo|
+-------------------------------------------+
| 0| 1| 0| 0|
| 1| 2| 0| 0|
| 2| 3| 0| 0|
+-------------------------------------------+
Courant-Friedrichs-Lewy number: 10
------------------ Convergence Criteria ( Zone 0 ) ---------------------
Maximum number of solver subiterations: 10.
Begin convergence monitoring at iteration 5.
Residual minimum value: 1e-14.
Cauchy series min. value: 1e-10.
Number of Cauchy elements: 100.
Begin windowed time average at iteration 0.
-------------------- Output Information ( Zone 0 ) ----------------------
File writing frequency:
+------------------------------------+
| File| Frequency|
+------------------------------------+
| RESTART| 250|
| SURFACE_CSV| 250|
| TECPLOT| 250|
| SURFACE_TECPLOT| 250|
+------------------------------------+
Writing the convergence history file every 1 inner iterations.
Writing the screen convergence history every 1 inner iterations.
The tabular file format is CSV (.csv).
Convergence history file name: history.
Forces breakdown file name: forces_breakdown_pyCAPS_su2_aflr2.dat.
Surface file name: surface_flow_pyCAPS_su2_aflr2.
Volume file name: flow_pyCAPS_su2_aflr2.
Restart file name: restart_flow_pyCAPS_su2_aflr2.dat.
------------- Config File Boundary Information ( Zone 0 ) ---------------
+-----------------------------------------------------------------------+
| Marker Type| Marker Name|
+-----------------------------------------------------------------------+
| Euler wall| BC_5|
| | BC_2|
+-----------------------------------------------------------------------+
| Inlet boundary| BC_4|
+-----------------------------------------------------------------------+
| Outlet boundary| BC_3|
+-----------------------------------------------------------------------+
-------------------- Output Preprocessing ( Zone 0 ) --------------------
WARNING: SURFACE_PRESSURE_DROP can only be computed for at least 2 surfaces (outlet, inlet, ...)
Screen output fields: TIME_ITER, OUTER_ITER, INNER_ITER, CUR_TIME, TIME_STEP, WALL_TIME, RMS_DENSITY, RMS_MOMENTUM-X, RMS_MOMENTUM-Y, RMS_ENERGY, EFFICIENCY
History output group(s): ITER, TIME_DOMAIN, WALL_TIME, RMS_RES, AERO_COEFF
Convergence field(s): RMS_DENSITY
Warning: No (valid) fields chosen for time convergence monitoring. Time convergence monitoring inactive.
Volume output fields: COORDINATES, SOLUTION, PRIMITIVE
------------------- Geometry Preprocessing ( Zone 0 ) -------------------
Two dimensional problem.
11153 grid points.
11340 volume elements.
4 surface markers.
98 boundary elements in index 0 (Marker = BC_2).
24 boundary elements in index 1 (Marker = BC_3).
24 boundary elements in index 2 (Marker = BC_4).
399 boundary elements in index 3 (Marker = BC_5).
917 triangles.
10423 quadrilaterals.
Setting point connectivity.
Renumbering points (Reverse Cuthill McKee Ordering).
Recomputing point connectivity.
Setting element connectivity.
Checking the numerical grid orientation.
There has been a re-orientation of 917 TRIANGLE volume elements.
There has been a re-orientation of 10423 QUADRILATERAL volume elements.
There has been a re-orientation of 73 LINE surface elements.
Identifying edges and vertices.
Setting the control volume structure.
Area of the computational grid: 999.878.
Searching for the closest normal neighbors to the surfaces.
Storing a mapping from global to local point index.
Compute the surface curvature.
Max K: 385.665. Mean K: 2.15881. Standard deviation K: 17.7215.
Checking for periodicity.
Computing mesh quality statistics for the dual control volumes.
+--------------------------------------------------------------+
| Mesh Quality Metric| Minimum| Maximum|
+--------------------------------------------------------------+
| Orthogonality Angle (deg.)| 49.3184| 90|
| CV Face Area Aspect Ratio| 1.00035| 33.4982|
| CV Sub-Volume Ratio| 1.00001| 7.89914|
+--------------------------------------------------------------+
Setting the multigrid structure.
+-------------------------------------------+
| MG Level| CVs|Aggl. Rate| CFL|
+-------------------------------------------+
| 0| 11153| 1/1.00| 10|
| 1| 2702| 1/4.13| 7.38309|
| 2| 549| 1/4.92| 4.99198|
+-------------------------------------------+
Finding max control volume width.
Wetted area = 2.06265 m.
Area projection in the x-plane = 0.211192 m, y-plane = 0.997011 m.
Max. coordinate in the x-direction = 1 m, y-direction = 0.102037 m.
Min. coordinate in the x-direction = 0.000323229 m, y-direction = -0.108492 m.
Checking if Euler & Symmetry markers are straight/plane:
Boundary marker BC_5 is NOT a single straight.
Boundary marker BC_2 is NOT a single straight.
Computing wall distances.
-------------------- Solver Preprocessing ( Zone 0 ) --------------------
Inviscid flow: Computing density based on free-stream
temperature and pressure using the ideal gas law.
Force coefficients computed using free-stream values.
-- Models:
+------------------------------------------------------------------------------+
| Viscosity Model| Conductivity Model| Fluid Model|
+------------------------------------------------------------------------------+
| -| -| STANDARD_AIR|
+------------------------------------------------------------------------------+
-- Fluid properties:
+------------------------------------------------------------------------------+
| Name| Dim. value| Ref. value| Unit|Non-dim. value|
+------------------------------------------------------------------------------+
| Gas Constant| 287.058| 1| N.m/kg.K| 287.058|
| Spec. Heat Ratio| -| -| -| 1.4|
+------------------------------------------------------------------------------+
-- Initial and free-stream conditions:
+------------------------------------------------------------------------------+
| Name| Dim. value| Ref. value| Unit|Non-dim. value|
+------------------------------------------------------------------------------+
| Static Pressure| 101325| 1| Pa| 101325|
| Density| 1.22498| 1| kg/m^3| 1.22498|
| Temperature| 288.15| 1| K| 288.15|
| Total Energy| 216054| 1| m^2/s^2| 216054|
| Velocity-X| 136.119| 1| m/s| 136.119|
| Velocity-Y| 0| 1| m/s| 0|
| Velocity Magnitude| 136.119| 1| m/s| 136.119|
+------------------------------------------------------------------------------+
| Mach Number| -| -| -| 0.4|
+------------------------------------------------------------------------------+
Initialize Jacobian structure (Euler). MG level: 0.
Initialize Jacobian structure (Euler). MG level: 1.
Initialize Jacobian structure (Euler). MG level: 2.
------------------- Numerics Preprocessing ( Zone 0 ) -------------------
----------------- Integration Preprocessing ( Zone 0 ) ------------------
------------------- Iteration Preprocessing ( Zone 0 ) ------------------
Euler/Navier-Stokes/RANS fluid iteration.
------------------------------ Begin Solver -----------------------------
Simulation Run using the Single-zone Driver
WARNING: SU2 was not compiled for an AVX-capable architecture. Performance could be better,
see https://su2code.github.io/docs_v7/Build-SU2-Linux-MacOS/#compiler-optimizations
WARNING: SU2 was not compiled for an AVX-capable architecture. Performance could be better,
see https://su2code.github.io/docs_v7/Build-SU2-Linux-MacOS/#compiler-optimizations
WARNING: SU2 was not compiled for an AVX-capable architecture. Performance could be better,
see https://su2code.github.io/docs_v7/Build-SU2-Linux-MacOS/#compiler-optimizations
+----------------------------------------------------------------------------------------------------------------------------------------------+
| Time_Iter| Outer_Iter| Inner_Iter| Cur_Time| Time_Step| Time(sec)| rms[Rho]| rms[RhoU]| rms[RhoV]| rms[RhoE]| CEff|
+----------------------------------------------------------------------------------------------------------------------------------------------+
| 0| 0| 0| 0.0000e+00| 0.0000e+00| 1.1082e-01| 0.071067| 2.739763| 1.616077| 5.599701| 0.055267|
| 0| 0| 1| 0.0000e+00| 0.0000e+00| 1.1357e-01| -0.447576| 2.193837| 1.571349| 5.070382| 0.046028|
| 0| 0| 2| 0.0000e+00| 0.0000e+00| 1.1090e-01| -0.561159| 2.074597| 1.490746| 4.953698| 0.033910|
| 0| 0| 3| 0.0000e+00| 0.0000e+00| 1.1118e-01| -0.723326| 1.921155| 1.390756| 4.790278| 0.049695|
| 0| 0| 4| 0.0000e+00| 0.0000e+00| 1.1294e-01| -0.876572| 1.825653| 1.275093| 4.637161| 0.133976|
| 0| 0| 5| 0.0000e+00| 0.0000e+00| 1.1345e-01| -1.029177| 1.759196| 1.156078| 4.482282| 0.368542|
| 0| 0| 6| 0.0000e+00| 0.0000e+00| 1.1339e-01| -1.215334| 1.704909| 1.114966| 4.286060| 0.974759|
| 0| 0| 7| 0.0000e+00| 0.0000e+00| 1.1355e-01| -1.329970| 1.644937| 1.145030| 4.116982| 2.716332|
| 0| 0| 8| 0.0000e+00| 0.0000e+00| 1.1371e-01| -1.270672| 1.570739| 1.155400| 4.139480| 16.569216|
| 0| 0| 9| 0.0000e+00| 0.0000e+00| 1.1380e-01| -1.221243| 1.499646| 1.130319| 4.189559| -6.277653|
----------------------------- Solver Exit -------------------------------
Maximum number of iterations reached (ITER = 10) before convergence.
+-----------------------------------------------------------------------+
| Convergence Field | Value | Criterion | Converged |
+-----------------------------------------------------------------------+
| rms[Rho]| -1.22124| < -14| No|
+-----------------------------------------------------------------------+
-------------------------------------------------------------------------
+-----------------------------------------------------------------------+
| File Writing Summary | Filename |
+-----------------------------------------------------------------------+
|SU2 binary restart |restart_flow_pyCAPS_su2_aflr2.dat |
Writing the forces breakdown file (forces_breakdown_pyCAPS_su2_aflr2.dat).
|CSV file |surface_flow_pyCAPS_su2_aflr2.csv |
Writing the forces breakdown file (forces_breakdown_pyCAPS_su2_aflr2.dat).
|Tecplot binary |flow_pyCAPS_su2_aflr2.szplt |
Writing the forces breakdown file (forces_breakdown_pyCAPS_su2_aflr2.dat).
|Tecplot binary surface |surface_flow_pyCAPS_su2_aflr2.szplt|
Error in tecFileWriterClose: Not all node map values for zone 1 have been written.
Currently need 994 more values.0: Error finishing Tecplot file output.
Writing the forces breakdown file (forces_breakdown_pyCAPS_su2_aflr2.dat).
+-----------------------------------------------------------------------+
--------------------------- Finalizing Solver ---------------------------
Deleted CNumerics container.
Deleted CIntegration container.
Deleted CSolver container.
Deleted CIteration container.
Deleted CInterface container.
Deleted CGeometry container.
Deleted CFreeFormDefBox class.
Deleted CSurfaceMovement class.
Deleted CVolumetricMovement class.
Deleted CConfig container.
Deleted nInst container.
Deleted COutput class.
-------------------------------------------------------------------------
------------------------- Exit Success (SU2_CFD) ------------------------
Total Force - Pressure + Viscous
Cl = 0.072253 Cd = -0.01151
Cmz = 0.070975
Cx = -0.01151 Cy = 0.072253
Pressure Contribution
Cl_p = 0.072253 Cd_p = -0.01151
Cmz_p = 0.070975
Cx_p = -0.01151 Cy_p = 0.072253
Viscous Contribution
Cl_v = 0.0 Cd_v = 0.0
Cmz_v = 0.0
Cx_v = 0.0 Cy_v = 0.0
real 0m3.949s
user 0m3.219s
sys 0m0.929s
+ status=0
+ set +x
=================================================
CAPS verification (using pyCAPS) case su2_and_AFLR2_PyTest.py passed (as expected)
=================================================
=================================================
+ echo 'astros_ThreeBar_PyTest.py test;'
+ tee -a /Users/jenkins/workspace/ESP_Beta/7.8/DARWIN64/EngSketchPad/CAPSexamples/regressionTest/pyCAPSlog.txt
astros_ThreeBar_PyTest.py test;
+ python -u astros_ThreeBar_PyTest.py -outLevel=0
+ tee -a /Users/jenkins/workspace/ESP_Beta/7.8/DARWIN64/EngSketchPad/CAPSexamples/regressionTest/pyCAPSlog.txt
WARNING:: WireBody is non-manifold
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = boundary, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = force, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsReference attributes ................
Number of unique capsReference attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 3
Name = bar1, index = 1
Name = bar2, index = 2
Name = bar3, index = 3
capsIgnore attribute found for edge - 3!!
capsIgnore attribute found. Removing unneeded nodes and elements from mesh!
Removing unused nodes...
Removed 0 (out of 4) unused nodes!
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 4
Number of elements = 3
Elemental Nodes = 0
Elemental Rods = 3
Elemental Tria3 = 0
Elemental Quad4 = 0
Aero_Reference value is NULL - No aero reference parameters set
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 3
Property name - bar1
Property name - bar2
Property name - bar3
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - BoundaryCondition
No "constraintType" specified for Constraint tuple BoundaryCondition, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedForce
Done getting FEA loads
Optimization Control tuple is NULL - Default optimization control is used
Getting FEA optimization control.......
Done getting FEA Optimization Control
Design_Variable tuple is NULL - No design variables applied
Design_Constraint tuple is NULL - No design constraints applied
Getting FEA analyses.......
Number of analyses - 1
Analysis name - SingleLoadCase
Done getting FEA analyses
Writing Astros grid and connectivity file (in free field format) ....
Finished writing Astros grid file
Writing subElement types (if any) - appending mesh file
Writing Astros instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint cards--each subcase individually
Writing load cards
Writing material cards
Writing property cards
real 0m1.802s
user 0m1.040s
sys 0m0.539s
+ status=0
+ set +x
=================================================
CAPS verification (using pyCAPS) case astros_ThreeBar_PyTest.py passed (as expected)
=================================================
=================================================
+ tee -a /Users/jenkins/workspace/ESP_Beta/7.8/DARWIN64/EngSketchPad/CAPSexamples/regressionTest/pyCAPSlog.txt
+ echo 'astros_Flutter_15degree.py test;'
astros_Flutter_15degree.py test;
+ python -u astros_Flutter_15degree.py -outLevel=0
+ tee -a /Users/jenkins/workspace/ESP_Beta/7.8/DARWIN64/EngSketchPad/CAPSexamples/regressionTest/pyCAPSlog.txt
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = Root_Point, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = Root_Point, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 1
Name = WingSurface, index = 1
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 1
Name = Root, index = 1
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsReference attributes ................
Number of unique capsReference attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 4
Name = Edge, index = 1
Name = Body, index = 2
Name = Root, index = 3
Name = Wing, index = 4
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 96
Number of elements = 77
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 77
Setting FEA Data
Mesh for body = 1
Number of nodal coordinates = 1
Number of elements = 1
Elemental Nodes = 1
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 0
Combining multiple FEA meshes!
Combined Number of nodal coordinates = 97
Combined Number of elements = 78
Combined Elemental Nodes = 1
Combined Elemental Rods = 0
Combined Elemental Tria3 = 0
Combined Elemental Quad4 = 77
Getting vortex lattice surface data
VLM surface name - WingSurface
Done getting vortex lattice surface data
Getting FEA vortex lattice mesh
Surface 1: Number of points found for aero-spline = 96
(Re-)Combining all aerodynamic surfaces into a 'Wing', 'Canard', and/or 'Fin' single surfaces !
Aero_Reference value is NULL - No aero reference parameters set
Getting FEA materials.......
Number of materials - 1
Material name - aluminum
No "materialType" specified for Material tuple aluminum, defaulting to "Isotropic"
Done getting FEA materials
Getting FEA properties.......
Number of properties - 2
Property name - Body
Property name - Edge
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - PointConstraint
No "constraintType" specified for Constraint tuple PointConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Getting FEA connections.......
Number of connection tuples - 1
Connection name - Root
No "groupName" specified for Connection tuple Root!
Looking for automatic connections from the use of capsConnectLink for Root
8 automatic connections were made for capsConnect Root (node id 97)
Done getting FEA connections
Load tuple is NULL - No loads applied
Optimization Control tuple is NULL - Default optimization control is used
Getting FEA optimization control.......
Done getting FEA Optimization Control
Design_Variable tuple is NULL - No design variables applied
Design_Constraint tuple is NULL - No design constraints applied
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Flutter
Done getting FEA analyses
Writing Astros grid and connectivity file (in free field format) ....
Finished writing Astros grid file
Writing subElement types (if any) - appending mesh file
Writing connection cards - appending mesh file
Writing Astros instruction file....
Writing aero card
Writing analysis cards
Writing constraint cards--each subcase individually
Writing material cards
Writing property cards
Writing unsteady aeroelastic cards
Note: The following floating-point exceptions are signalling: IEEE_UNDERFLOW_FLAG IEEE_DENORMAL
real 0m2.848s
user 0m1.457s
sys 0m0.689s
+ status=0
+ set +x
=================================================
CAPS verification (using pyCAPS) case astros_Flutter_15degree.py passed (as expected)
=================================================
=================================================
+ echo 'masstran_PyTest.py test;'
+ tee -a /Users/jenkins/workspace/ESP_Beta/7.8/DARWIN64/EngSketchPad/CAPSexamples/regressionTest/pyCAPSlog.txt
masstran_PyTest.py test;
+ python -u masstran_PyTest.py -outLevel=0
+ tee -a /Users/jenkins/workspace/ESP_Beta/7.8/DARWIN64/EngSketchPad/CAPSexamples/regressionTest/pyCAPSlog.txt
Getting results mass properties.....
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = Ribs_and_Spars, index = 1
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 0
Getting surface mesh for body 1 (of 1)
Body 1 (of 1)
Number of nodes = 1159
Number of elements = 798
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 0
Number of quadrilateral elements = 798
----------------------------
Total number of nodes = 1159
Total number of elements = 798
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = Rib_Constraint, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 0
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = Ribs_and_Spars, index = 1
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 1159
Number of elements = 798
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 798
Getting FEA materials.......
Number of materials - 2
Material name - Madeupium
Material name - Unobtainium
No "materialType" specified for Material tuple Unobtainium, defaulting to "Isotropic"
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - Ribs_and_Spars
No "material" specified for Property tuple Ribs_and_Spars, defaulting to an index of 1
Done getting FEA properties
Updating mesh element types based on properties input
Area 3.428666259747
Mass 5383.006027803
Centroid [1.222256036874, 0.1634981473778, -4.234492548615e-11]
CG [1.222256036874, 0.1634981473778, -4.234574416087e-11]
Ixx 22133.97306033
Iyy 23448.30046709
Izz 1389.213122582
Ixy 164.2055275657
Ixz -7.454849830627e-06
Iyz 1.707682983295e-06
I [22133.97306033, 23448.30046709, 1389.213122582, 164.2055275657, -7.454849830627e-06, 1.707682983295e-06]
II [[22133.97306033, -164.2055275657, 7.454849830627e-06], [-164.2055275657, 23448.30046709, -1.707682983295e-06], [7.454849830627e-06, -1.707682983295e-06, 1389.213122582]]
real 0m6.629s
user 0m10.027s
sys 0m4.118s
+ status=0
+ set +x
=================================================
CAPS verification (using pyCAPS) case masstran_PyTest.py passed (as expected)
=================================================
=================================================
+ echo 'hsm_SingleLoadCase_PyTest.py test;'
+ tee -a /Users/jenkins/workspace/ESP_Beta/7.8/DARWIN64/EngSketchPad/CAPSexamples/regressionTest/pyCAPSlog.txt
hsm_SingleLoadCase_PyTest.py test;
+ python -u hsm_SingleLoadCase_PyTest.py -outLevel=0
+ tee -a /Users/jenkins/workspace/ESP_Beta/7.8/DARWIN64/EngSketchPad/CAPSexamples/regressionTest/pyCAPSlog.txt
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Creating HSM BEM
Getting quads for BEM!
Number of nodal coordinates = 81
Number of elements = 96
Elemental Tria3 = 0
Elemental Quad4 = 64
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Max Adjacency set to = 9
MaxDim = 32, numBCEdge = 0, numBCNode = 32, numJoint = 0
NEED TO ADD MORE CODE TO hsm_setGlobalParameter
NEED TO ADD MORE CODE TO hsm_setNodeBCParameter
NumBCNode = 32
->HSMSOL
Matrix Non-zero Entries = 5741
Converging HSM equation system ...
iter dr dd dp rlx max
1 0.130E-01 0.165E+00 0.153E-04 1.000 ddy @ ( 0.25 0.06 0.00)
1* 0.260E-03 0.000E+00 0.000E+00 1.000 drz @ ( 0.25 0.12 0.00)
1* 0.240E-05 0.000E+00 0.000E+00 1.000 drz @ ( 0.25 0.09 0.00)
2 0.379E-02 0.505E-01 0.750E-04 1.000 ddy @ ( 0.25 0.19 0.00)
2* 0.420E-04 0.000E+00 0.000E+00 1.000 drz @ ( 0.25 0.12 0.00)
3 0.168E-02 0.225E-01 0.208E-04 1.000 ddy @ ( 0.25 0.06 0.00)
4 0.325E-03 0.427E-02 0.250E-05 1.000 ddy @ ( 0.25 0.19 0.00)
5 0.794E-05 0.112E-03 0.170E-06 1.000 ddy @ ( 0.25 0.19 0.00)
6 0.387E-08 0.598E-07 0.197E-09 1.000 ddy @ ( 0.25 0.06 0.00)
7 0.848E-15 0.147E-13 0.924E-15 1.000 ddy @ ( 0.25 0.19 0.00)
Converging n vectors ...
it = 1 dn = 0.788E-01 rlx = 1.000 ( 59 )
it = 2 dn = 0.566E-16 rlx = 1.000 ( 35 )
Converging e1,e2 vectors ...
it = 1 de = 0.691E-03 rlx = 1.000 ( 45 )
it = 2 de = 0.404E-04 rlx = 1.000 ( 9 )
it = 3 de = 0.142E-07 rlx = 1.000 ( 46 )
it = 4 de = 0.521E-11 rlx = 1.000 ( 62 )
Calculating strains, stress resultants ...
Writing HSM solution to Tecplot File - HSMSingleLoadPlate.dat
real 0m1.549s
user 0m1.347s
sys 0m0.189s
+ status=0
+ set +x
=================================================
CAPS verification (using pyCAPS) case hsm_SingleLoadCase_PyTest.py passed (as expected)
=================================================
=================================================
+ echo '../corsairlite/qp.py test;'
+ tee -a /Users/jenkins/workspace/ESP_Beta/7.8/DARWIN64/EngSketchPad/CAPSexamples/regressionTest/pyCAPSlog.txt
../corsairlite/qp.py test;
+ python -u ../corsairlite/qp.py -outLevel=0
+ tee -a /Users/jenkins/workspace/ESP_Beta/7.8/DARWIN64/EngSketchPad/CAPSexamples/regressionTest/pyCAPSlog.txt
Objective
---------
-21.56250 dimensionless
Variables
---------
x : 1.62500 [-] The X variable
y : 1.37500 [-] The Y variable
Constants
---------
c : 3 [-] A constant
c2 : 2 [-] A constant
Sensitivities
-------------
c : + 0.46957 A constant
c2 : - 0.22338 A constant
Solve Report
------------
Solve Method : Quadratic Program
Classification : Convex
Solver : cvxopt
real 0m47.921s
user 0m2.260s
sys 0m0.487s
+ status=0
+ set +x
=================================================
CAPS verification (using pyCAPS) case ../corsairlite/qp.py passed (as expected)
=================================================
*************************************************
*************************************************
=================================================
Did not run examples for:
abaqus
awave
Cart3D
Mystran
=================================================
All tests pass!
=================================================
=================================================
+ cd /Users/jenkins/workspace/ESP_Beta/7.8/DARWIN64
+ mkdir -p /Users/jenkins/workspace/ESP_Beta/7.8/DARWIN64/test/plugs
+ cd /Users/jenkins/workspace/ESP_Beta/7.8/DARWIN64/test/plugs
+ find /Users/jenkins/workspace/ESP_Beta/7.8/DARWIN64/EngSketchPad/data/Plugs -name 'plugs0*.csm'
+ sort -f
+ awk '{ n=split($0, a, ";"); for(i=1; i<=n; i+=2) print a[i] }' /Users/jenkins/workspace/ESP_Beta/7.8/DARWIN64/JenkinsESP/data/plugs/plugsFailure.txt
+ cp /Users/jenkins/workspace/ESP_Beta/7.8/DARWIN64/JenkinsESP/data/plugs/plugsIgnore.txt .
+ set +x
Testing CSM files:
data/Plugs/plugs0a.csm
data/Plugs/plugs0b.csm
data/Plugs/plugs0c.csm
data/Plugs/plugs0d.csm
total 51928
-rw-r--r-- 1 jenkins staff 1.2M Apr 3 12:29 ASTRO.D01
-rw-r--r-- 1 jenkins staff 277K Apr 3 12:29 ASTRO.IDX
-rwxr-xr-x 1 jenkins staff 131K Apr 3 12:29 ESPxddm
-rwxr-xr-x 1 jenkins staff 229K Apr 3 12:29 Slugs
-rwxr-xr-x 1 jenkins staff 102K Apr 3 12:29 TestFit
-rwxr-xr-x 1 jenkins staff 1.8M Apr 3 12:29 avl
-rwxr-xr-x 1 jenkins staff 50K Apr 3 12:29 cart3dTest
-rwxr-xr-x 1 jenkins staff 50K Apr 3 12:28 egads2cart
-rwxr-xr-x 1 jenkins staff 86K Apr 3 12:29 egads2cgt
-rwxr-xr-x 1 jenkins staff 383K Apr 3 12:29 friction
-rwxr-xr-x 1 jenkins staff 8.9M Apr 3 12:29 mastros.exe
-rwxr-xr-x 1 jenkins staff 2.2M Apr 3 12:29 mses
-rwxr-xr-x 1 jenkins staff 2.5M Apr 3 12:29 mset
-rwxr-xr-x 1 jenkins staff 51K Apr 3 12:29 phaseUtil
-rw-r--r-- 1 jenkins staff 1.6K Apr 3 12:31 pod.egads
-rw-r--r-- 1 jenkins staff 0B Apr 3 12:31 port7681.jrnl
-rwxr-xr-x 1 jenkins staff 1.2M Apr 3 12:29 pplot
-rwxr-xr-x 1 jenkins staff 1.2M Apr 3 12:29 pxplot
-rwxr-xr-x 1 jenkins staff 84K Apr 3 12:28 sensCSM
-rwxr-xr-x 1 jenkins staff 224K Apr 3 12:28 serveCSM
-rwxr-xr-x 1 jenkins staff 191K Apr 3 12:28 serveESP
-rwxr-xr-x 1 jenkins staff 68K Apr 3 12:28 vCurvature
-rwxr-xr-x 1 jenkins staff 51K Apr 3 12:28 vGeom
-rwxr-xr-x 1 jenkins staff 52K Apr 3 12:28 vTess
-rwxr-xr-x 1 jenkins staff 2.3M Apr 3 12:28 vTesstatic
-rw-r--r-- 1 jenkins staff 195K Apr 3 12:31 wingMultiModel.bdf
-rwxr-xr-x 1 jenkins staff 1.8M Apr 3 12:29 xfoil
( 1 / 4 )
data/Plugs/plugs0a.csm;
++ /Users/jenkins/workspace/ESP_Beta/7.8/DARWIN64/EngSketchPad/bin/serveCSM /Users/jenkins/workspace/ESP_Beta/7.8/DARWIN64/EngSketchPad/data/Plugs/plugs0a.csm -outLevel 0 -plugs 25 -plot /Users/jenkins/workspace/ESP_Beta/7.8/DARWIN64/EngSketchPad/data/Plugs/plugs0.cloud -batch -verify -jrnl /Users/jenkins/workspace/ESP_Beta/7.8/DARWIN64/EngSketchPad/data/Plugs/buildFinal.jrnl
WARNING:: cannot open "/Users/jenkins/workspace/ESP_Beta/7.8/DARWIN64/EngSketchPad/data/Plugs/verify_7.8.0/plugs0a.vfy", so verification is being skipped
===================================
PLUGS with 4562 points in the cloud
===================================
PLUGS phase1: match bounding boxes
PLUGS phase2: match cloud points
Starting pass 1 (of 25) of phase2
Pass 1 converged, dmax= 5.416e-07, rmsbest= 6.132e-04, reclass= 4562, unclass= 0
Starting pass 2 (of 25) of phase2
Pass 2 converged, dmax= 5.366e-07, rmsbest= 7.097e-04, reclass= 2, unclass= 0
Starting pass 3 (of 25) of phase2
Phase2 passes converged because points are classified same as previous pass
==> Opening input journal file "/Users/jenkins/workspace/ESP_Beta/7.8/DARWIN64/EngSketchPad/data/Plugs/buildFinal.jrnl"
==> Closing input journal file
==> serveCSM completed successfully with no verification data
real 0m45.615s
user 0m8.772s
sys 0m0.640s
++ set +x
data/Plugs/plugs0a passed (as expected)
--------------------------------------------------------------------------------------------------
( 2 / 4 )
data/Plugs/plugs0b.csm;
++ /Users/jenkins/workspace/ESP_Beta/7.8/DARWIN64/EngSketchPad/bin/serveCSM /Users/jenkins/workspace/ESP_Beta/7.8/DARWIN64/EngSketchPad/data/Plugs/plugs0b.csm -outLevel 0 -plugs 25 -plot /Users/jenkins/workspace/ESP_Beta/7.8/DARWIN64/EngSketchPad/data/Plugs/plugs0.cloud -batch -verify -jrnl /Users/jenkins/workspace/ESP_Beta/7.8/DARWIN64/EngSketchPad/data/Plugs/buildFinal.jrnl
WARNING:: cannot open "/Users/jenkins/workspace/ESP_Beta/7.8/DARWIN64/EngSketchPad/data/Plugs/verify_7.8.0/plugs0b.vfy", so verification is being skipped
===================================
PLUGS with 4562 points in the cloud
===================================
PLUGS phase1: match bounding boxes
PLUGS phase2: match cloud points
Starting pass 1 (of 25) of phase2
Pass 1 converged, dmax= 3.039e-07, rmsbest= 4.036e-02, reclass= 4562, unclass= 0
Starting pass 2 (of 25) of phase2
Pass 2 converged, dmax= 2.814e-07, rmsbest= 1.924e-03, reclass= 1033, unclass= 0
Starting pass 3 (of 25) of phase2
Pass 3 converged, dmax= 4.494e-07, rmsbest= 5.920e-04, reclass= 473, unclass= 0
Starting pass 4 (of 25) of phase2
Pass 4 converged, dmax= 5.366e-07, rmsbest= 7.097e-04, reclass= 17, unclass= 0
Starting pass 5 (of 25) of phase2
Phase2 passes converged because points are classified same as previous pass
==> Opening input journal file "/Users/jenkins/workspace/ESP_Beta/7.8/DARWIN64/EngSketchPad/data/Plugs/buildFinal.jrnl"
==> Closing input journal file
==> serveCSM completed successfully with no verification data
real 0m9.873s
user 0m12.154s
sys 0m0.143s
++ set +x
data/Plugs/plugs0b passed (as expected)
--------------------------------------------------------------------------------------------------
( 3 / 4 )
data/Plugs/plugs0c.csm;
++ /Users/jenkins/workspace/ESP_Beta/7.8/DARWIN64/EngSketchPad/bin/serveCSM /Users/jenkins/workspace/ESP_Beta/7.8/DARWIN64/EngSketchPad/data/Plugs/plugs0c.csm -outLevel 0 -plugs 25 -plot /Users/jenkins/workspace/ESP_Beta/7.8/DARWIN64/EngSketchPad/data/Plugs/plugs0.cloud -batch -verify -jrnl /Users/jenkins/workspace/ESP_Beta/7.8/DARWIN64/EngSketchPad/data/Plugs/buildFinal.jrnl
WARNING:: cannot open "/Users/jenkins/workspace/ESP_Beta/7.8/DARWIN64/EngSketchPad/data/Plugs/verify_7.8.0/plugs0c.vfy", so verification is being skipped
===================================
PLUGS with 4562 points in the cloud
===================================
PLUGS phase1: match bounding boxes
PLUGS phase2: match cloud points
Starting pass 1 (of 25) of phase2
Pass 1 ran out of iterations, rmsbest= 1.677e-01, reclass= 4562, unclass= 554
Starting pass 2 (of 25) of phase2
Pass 2 converged, dmax= 4.016e-07, rmsbest= 6.330e-02, reclass= 1676, unclass= 0
Starting pass 3 (of 25) of phase2
Pass 3 converged, dmax= 1.881e-07, rmsbest= 8.736e-03, reclass= 791, unclass= 0
Starting pass 4 (of 25) of phase2
Pass 4 converged, dmax= 3.081e-07, rmsbest= 1.037e-03, reclass= 428, unclass= 0
Starting pass 5 (of 25) of phase2
Pass 5 converged, dmax= 5.816e-07, rmsbest= 7.097e-04, reclass= 109, unclass= 0
Starting pass 6 (of 25) of phase2
Phase2 passes converged because points are classified same as previous pass
==> Opening input journal file "/Users/jenkins/workspace/ESP_Beta/7.8/DARWIN64/EngSketchPad/data/Plugs/buildFinal.jrnl"
==> Closing input journal file
==> serveCSM completed successfully with no verification data
real 0m26.854s
user 0m39.919s
sys 0m0.352s
++ set +x
data/Plugs/plugs0c passed (as expected)
--------------------------------------------------------------------------------------------------
( 4 / 4 )
data/Plugs/plugs0d.csm;
++ /Users/jenkins/workspace/ESP_Beta/7.8/DARWIN64/EngSketchPad/bin/serveCSM /Users/jenkins/workspace/ESP_Beta/7.8/DARWIN64/EngSketchPad/data/Plugs/plugs0d.csm -outLevel 0 -plugs 25 -plot /Users/jenkins/workspace/ESP_Beta/7.8/DARWIN64/EngSketchPad/data/Plugs/plugs0.cloud -batch -verify -jrnl /Users/jenkins/workspace/ESP_Beta/7.8/DARWIN64/EngSketchPad/data/Plugs/buildFinal.jrnl
WARNING:: cannot open "/Users/jenkins/workspace/ESP_Beta/7.8/DARWIN64/EngSketchPad/data/Plugs/verify_7.8.0/plugs0d.vfy", so verification is being skipped
===================================
PLUGS with 4562 points in the cloud
===================================
PLUGS phase1: match bounding boxes
PLUGS phase2: match cloud points
Starting pass 1 (of 25) of phase2
Pass 1 ran out of iterations, rmsbest= 1.677e-01, reclass= 4562, unclass= 554
Starting pass 2 (of 25) of phase2
Pass 2 converged, dmax= 4.016e-07, rmsbest= 6.330e-02, reclass= 1676, unclass= 0
Starting pass 3 (of 25) of phase2
Pass 3 converged, dmax= 1.881e-07, rmsbest= 8.736e-03, reclass= 791, unclass= 0
Starting pass 4 (of 25) of phase2
Pass 4 converged, dmax= 3.081e-07, rmsbest= 1.037e-03, reclass= 428, unclass= 0
Starting pass 5 (of 25) of phase2
Pass 5 converged, dmax= 5.816e-07, rmsbest= 7.097e-04, reclass= 109, unclass= 0
Starting pass 6 (of 25) of phase2
Phase2 passes converged because points are classified same as previous pass
==> Opening input journal file "/Users/jenkins/workspace/ESP_Beta/7.8/DARWIN64/EngSketchPad/data/Plugs/buildFinal.jrnl"
==> Closing input journal file
==> serveCSM completed successfully with no verification data
real 0m27.247s
user 0m40.902s
sys 0m0.339s
++ set +x
data/Plugs/plugs0d passed (as expected)
--------------------------------------------------------------------------------------------------
[Execution node] check if [macys_VM] is in [[viggen]]
Run condition [Execution node ] preventing perform for step [Execute shell]
[Execution node] check if [macys_VM] is in [[windows10x64]]
Run condition [Execution node ] preventing perform for step [Execute Windows batch command]
[GNU C Compiler (gcc)] Parsing console log (workspace: '/Users/jenkins/workspace/ESP_Beta/7.8/DARWIN64')
[GNU C Compiler (gcc)] Successfully parsed console log
[GNU C Compiler (gcc)] -> found 0 issues (skipped 0 duplicates)
[GNU C Compiler (gcc)] Skipping post processing
[GNU C Compiler (gcc)] No filter has been set, publishing all 0 issues
[GNU C Compiler (gcc)] Repository miner is not configured, skipping repository mining
[Clang] Parsing console log (workspace: '/Users/jenkins/workspace/ESP_Beta/7.8/DARWIN64')
[Clang] -> found 0 issues (skipped 0 duplicates)
[Clang] Parsing console log (workspace: '/Users/jenkins/workspace/ESP_Beta/7.8/DARWIN64')
[Clang] -> found 0 issues (skipped 0 duplicates)
[Clang] Successfully parsed console log
[Clang] -> found 0 issues (skipped 0 duplicates)
[Clang] Parsing console log (workspace: '/Users/jenkins/workspace/ESP_Beta/7.8/DARWIN64')
[Clang] Skipping post processing
[Clang] No filter has been set, publishing all 0 issues
[Clang] Repository miner is not configured, skipping repository mining
[Static Analysis] Successfully parsed console log
[Static Analysis] -> found 0 issues (skipped 0 duplicates)
[Static Analysis] Parsing console log (workspace: '/Users/jenkins/workspace/ESP_Beta/7.8/DARWIN64')
[Static Analysis] Successfully parsed console log
[Static Analysis] -> found 0 issues (skipped 0 duplicates)
[Static Analysis] Skipping post processing
[Static Analysis] No filter has been set, publishing all 0 issues
[Static Analysis] Repository miner is not configured, skipping repository mining
[Static Analysis] Successfully parsed console log
[Static Analysis] -> found 0 issues (skipped 0 duplicates)
[Static Analysis] Successfully parsed console log
[Static Analysis] -> found 0 issues (skipped 0 duplicates)
[Static Analysis] Successfully parsed console log
[Static Analysis] -> found 0 issues (skipped 0 duplicates)
[Static Analysis] Parsing console log (workspace: '/Users/jenkins/workspace/ESP_Beta/7.8/DARWIN64')
[Static Analysis] Skipping post processing
[Static Analysis] No filter has been set, publishing all 0 issues
[Static Analysis] Repository miner is not configured, skipping repository mining
[Static Analysis] Reference build recorder is not configured
[Static Analysis] No valid reference build found
[Static Analysis] All reported issues will be considered outstanding
[Static Analysis] No quality gates have been set - skipping
[Static Analysis] Health report is disabled - skipping
[Static Analysis] Created analysis result for 0 issues (found 0 new issues, fixed 0 issues)
[Static Analysis] Attaching ResultAction with ID 'analysis' to build 'ESP_Beta/CASREV=7.8,ESP_ARCH=DARWIN64,buildnode=macys_VM #702'.
[Checks API] No suitable checks publisher found.
[WS-CLEANUP] Deleting project workspace...
[WS-CLEANUP] Deferred wipeout is used...
[WS-CLEANUP] done
Finished: SUCCESS