Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - plateWidth
Number of design variable relations - 0
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsReference attributes ................
Number of unique capsReference attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Warning: No capsGroup/capsIgnore attribute found on edge 1 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 2 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 3 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 4 of face 1, unable to assign a boundary index value
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - plateWidth
Number of design variable relations - 0
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsReference attributes ................
Number of unique capsReference attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Warning: No capsGroup/capsIgnore attribute found on edge 1 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 2 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 3 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 4 of face 1, unable to assign a boundary index value
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - plateWidth
Number of design variable relations - 0
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsReference attributes ................
Number of unique capsReference attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Warning: No capsGroup/capsIgnore attribute found on edge 1 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 2 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 3 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 4 of face 1, unable to assign a boundary index value
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - plateWidth
Number of design variable relations - 0
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsReference attributes ................
Number of unique capsReference attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Warning: No capsGroup/capsIgnore attribute found on edge 1 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 2 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 3 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 4 of face 1, unable to assign a boundary index value
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - plateWidth
Number of design variable relations - 0
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsReference attributes ................
Number of unique capsReference attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Warning: No capsGroup/capsIgnore attribute found on edge 1 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 2 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 3 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 4 of face 1, unable to assign a boundary index value
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - plateWidth
Number of design variable relations - 0
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsReference attributes ................
Number of unique capsReference attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Warning: No capsGroup/capsIgnore attribute found on edge 1 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 2 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 3 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 4 of face 1, unable to assign a boundary index value
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - plateWidth
Number of design variable relations - 0
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsReference attributes ................
Number of unique capsReference attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Warning: No capsGroup/capsIgnore attribute found on edge 1 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 2 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 3 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 4 of face 1, unable to assign a boundary index value
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - plateWidth
Number of design variable relations - 0
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsReference attributes ................
Number of unique capsReference attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Warning: No capsGroup/capsIgnore attribute found on edge 1 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 2 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 3 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 4 of face 1, unable to assign a boundary index value
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsReference attributes ................
Number of unique capsReference attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Warning: No capsGroup/capsIgnore attribute found on edge 1 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 2 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 3 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 4 of face 1, unable to assign a boundary index value
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsReference attributes ................
Number of unique capsReference attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Warning: No capsGroup/capsIgnore attribute found on edge 1 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 2 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 3 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 4 of face 1, unable to assign a boundary index value
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsReference attributes ................
Number of unique capsReference attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Warning: No capsGroup/capsIgnore attribute found on edge 1 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 2 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 3 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 4 of face 1, unable to assign a boundary index value
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsReference attributes ................
Number of unique capsReference attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Warning: No capsGroup/capsIgnore attribute found on edge 1 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 2 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 3 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 4 of face 1, unable to assign a boundary index value
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsReference attributes ................
Number of unique capsReference attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Warning: No capsGroup/capsIgnore attribute found on edge 1 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 2 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 3 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 4 of face 1, unable to assign a boundary index value
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsReference attributes ................
Number of unique capsReference attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Warning: No capsGroup/capsIgnore attribute found on edge 1 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 2 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 3 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 4 of face 1, unable to assign a boundary index value
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsReference attributes ................
Number of unique capsReference attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Warning: No capsGroup/capsIgnore attribute found on edge 1 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 2 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 3 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 4 of face 1, unable to assign a boundary index value
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsReference attributes ................
Number of unique capsReference attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Warning: No capsGroup/capsIgnore attribute found on edge 1 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 2 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 3 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 4 of face 1, unable to assign a boundary index value
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsReference attributes ................
Number of unique capsReference attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Warning: No capsGroup/capsIgnore attribute found on edge 1 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 2 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 3 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 4 of face 1, unable to assign a boundary index value
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsReference attributes ................
Number of unique capsReference attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Warning: No capsGroup/capsIgnore attribute found on edge 1 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 2 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 3 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 4 of face 1, unable to assign a boundary index value
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsReference attributes ................
Number of unique capsReference attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Warning: No capsGroup/capsIgnore attribute found on edge 1 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 2 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 3 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 4 of face 1, unable to assign a boundary index value
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsReference attributes ................
Number of unique capsReference attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Warning: No capsGroup/capsIgnore attribute found on edge 1 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 2 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 3 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 4 of face 1, unable to assign a boundary index value
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsReference attributes ................
Number of unique capsReference attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Warning: No capsGroup/capsIgnore attribute found on edge 1 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 2 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 3 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 4 of face 1, unable to assign a boundary index value
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsReference attributes ................
Number of unique capsReference attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Warning: No capsGroup/capsIgnore attribute found on edge 1 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 2 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 3 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 4 of face 1, unable to assign a boundary index value
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsReference attributes ................
Number of unique capsReference attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Warning: No capsGroup/capsIgnore attribute found on edge 1 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 2 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 3 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 4 of face 1, unable to assign a boundary index value
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsReference attributes ................
Number of unique capsReference attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Warning: No capsGroup/capsIgnore attribute found on edge 1 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 2 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 3 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 4 of face 1, unable to assign a boundary index value
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsReference attributes ................
Number of unique capsReference attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Warning: No capsGroup/capsIgnore attribute found on edge 1 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 2 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 3 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 4 of face 1, unable to assign a boundary index value
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsReference attributes ................
Number of unique capsReference attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Warning: No capsGroup/capsIgnore attribute found on edge 1 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 2 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 3 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 4 of face 1, unable to assign a boundary index value
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsReference attributes ................
Number of unique capsReference attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Warning: No capsGroup/capsIgnore attribute found on edge 1 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 2 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 3 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 4 of face 1, unable to assign a boundary index value
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsReference attributes ................
Number of unique capsReference attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Warning: No capsGroup/capsIgnore attribute found on edge 1 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 2 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 3 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 4 of face 1, unable to assign a boundary index value
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsReference attributes ................
Number of unique capsReference attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Warning: No capsGroup/capsIgnore attribute found on edge 1 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 2 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 3 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 4 of face 1, unable to assign a boundary index value
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsReference attributes ................
Number of unique capsReference attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Warning: No capsGroup/capsIgnore attribute found on edge 1 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 2 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 3 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 4 of face 1, unable to assign a boundary index value
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsReference attributes ................
Number of unique capsReference attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Warning: No capsGroup/capsIgnore attribute found on edge 1 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 2 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 3 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 4 of face 1, unable to assign a boundary index value
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = plateEdge, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 1
Name = plate, index = 1
Mapping capsBound attributes ................
Number of unique capsBound attributes = 0
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 0
Mapping capsResponse attributes ................
Number of unique capsResponse attributes = 0
Mapping capsReference attributes ................
Number of unique capsReference attributes = 0
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = plate, index = 1
Warning: No capsGroup/capsIgnore attribute found on edge 1 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 2 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 3 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 4 of face 1, unable to assign a boundary index value
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 25
Number of elements = 16
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 16
Getting FEA materials.......
Number of materials - 1
Material name - Madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 1
Property name - plate
Done getting FEA properties
Updating mesh element types based on properties input
Getting FEA constraints.......
Number of constraints - 1
Constraint name - edgeConstraint
No "constraintType" specified for Constraint tuple edgeConstraint, defaulting to "ZeroDisplacement"
Done getting FEA constraints
Support tuple is NULL - No supports applied
Connect tuple is NULL - Using defaults
Getting FEA loads.......
Number of loads - 1
Load name - appliedPressure
Done getting FEA loads
Getting FEA design variables.......
Number of design variables - 1
Design_Variable name - thick1
Design_Variable_Relation name - thick1
Number of design variable relations - 1
Done getting FEA design variables
Design_Constraint tuple is NULL - No design constraints applied
Design_Equation tuple is NULL - No design equations applied
Design_Table tuple is NULL - No design table constants applied
Design_Opt_Param tuple is NULL - No design optimization parameters applied
Design_Response tuple is NULL - No design responses applied
Design_Equation_Response tuple is NULL - No design equation responses applied
Analysis tuple is NULL
Getting FEA analyses.......
Number of analyses - 1
Analysis name - Default
Done getting FEA analyses
Writing Nastran grid and connectivity file (in small field format) ....
Finished writing Nastran grid file
Writing subElement types (if any) - appending mesh file
Writing TACS instruction file....
Writing analysis cards
Writing load ADD cards
Writing constraint ADD cards
Writing load cards
Writing constraint cards
Writing material cards
Writing property cards
Writing design variable cards
Writing design variable relation cards
ok
test_Multiple_Mesh (test_tetgen.TestTETGEN.test_Multiple_Mesh) ... ERROR:: BAD STATUS = -276 from matsol (called from solveSketchOrig:61911)
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 7
Name = box, index = 1
Name = cylinder, index = 2
Name = cone, index = 3
Name = torus, index = 4
Name = sphere, index = 5
Name = boxhole, index = 6
Name = bullet, index = 7
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 1
Name = box, index = 1
Getting surface mesh for body 1 (of 7)
Getting surface mesh for body 2 (of 7)
Getting surface mesh for body 3 (of 7)
Getting surface mesh for body 4 (of 7)
Getting surface mesh for body 5 (of 7)
Getting surface mesh for body 6 (of 7)
119635E00 EGADS Info: Face #3 -> Edge #9 (9) Internally in Loop 4 7, sen = -1!
119635E00 EGADS Info: Face #3 -> Edge #9 (9) Internally in Loop 7 4, sen = 1!
70000F5A4000 EGADS Info: Face #5 -> Edge #17 (9) Internally in Loop 7 4, sen = -1!
70000F5A4000 EGADS Info: Face #5 -> Edge #17 (9) Internally in Loop 4 7, sen = 1!
Getting surface mesh for body 7 (of 7)
Body 1 (of 7)
Number of nodes = 98
Number of elements = 192
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 192
Number of quadrilateral elements = 0
Body 2 (of 7)
Number of nodes = 294
Number of elements = 584
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 584
Number of quadrilateral elements = 0
Body 3 (of 7)
Number of nodes = 488
Number of elements = 972
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 972
Number of quadrilateral elements = 0
Warning: No capsGroup/capsIgnore attribute found on edge 1 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 2 of face 1, unable to assign a boundary index value
Body 4 (of 7)
Number of nodes = 2048
Number of elements = 4096
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 4096
Number of quadrilateral elements = 0
Body 5 (of 7)
Number of nodes = 152
Number of elements = 300
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 300
Number of quadrilateral elements = 0
Body 6 (of 7)
Number of nodes = 624
Number of elements = 1248
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 1248
Number of quadrilateral elements = 0
Body 7 (of 7)
Number of nodes = 488
Number of elements = 972
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 972
Number of quadrilateral elements = 0
----------------------------
Total number of nodes = 4192
Total number of elements = 8364
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 7
Name = box, index = 1
Name = cylinder, index = 2
Name = cone, index = 3
Name = torus, index = 4
Name = sphere, index = 5
Name = boxhole, index = 6
Name = bullet, index = 7
Warning: No capsGroup/capsIgnore attribute found on edge 1 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 2 of face 1, unable to assign a boundary index value
Body 1 number of surface: nodes - 98, elements - 192
Body 2 number of surface: nodes - 294, elements - 584
Body 3 number of surface: nodes - 488, elements - 972
Body 4 number of surface: nodes - 2048, elements - 4096
Body 5 number of surface: nodes - 152, elements - 300
Body 6 number of surface: nodes - 624, elements - 1248
Body 7 number of surface: nodes - 488, elements - 972
Getting volume mesh for body 1 (of 7)
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = box, index = 1
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.002493
Creating surface mesh ...
Surface mesh seconds: 0.000219
Recovering boundaries...
Boundary recovery seconds: 0.001054
Removing exterior tetrahedra ...
Spreading region attributes.
Exterior tets removal seconds: 6.5e-05
Recovering Delaunayness...
Delaunay recovery seconds: 0.000789
Refining mesh...
Refinement seconds: 0.000607
Smoothing vertices...
Mesh smoothing seconds: 0.002508
Improving mesh...
Mesh improvement seconds: 0.00013
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 8.3e-05
Total running seconds: 0.008024
Statistics:
Input points: 98
Input facets: 192
Input segments: 288
Input holes: 0
Input regions: 0
Mesh points: 100
Mesh tetrahedra: 232
Mesh faces: 560
Mesh faces on exterior boundary: 192
Mesh faces on input facets: 192
Mesh edges on input segments: 288
Steiner points inside domain: 2
Done meshing using TetGen!
Getting volume mesh for body 2 (of 7)
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = cylinder, index = 1
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.011365
Creating surface mesh ...
Surface mesh seconds: 0.000623
Recovering boundaries...
Boundary recovery seconds: 0.002674
Removing exterior tetrahedra ...
Spreading region attributes.
Exterior tets removal seconds: 0.000587
Recovering Delaunayness...
Delaunay recovery seconds: 0.00354
Refining mesh...
Refinement seconds: 0.019146
Smoothing vertices...
Mesh smoothing seconds: 0.016405
Improving mesh...
Mesh improvement seconds: 0.000415
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.000125
Total running seconds: 0.054979
Statistics:
Input points: 294
Input facets: 584
Input segments: 876
Input holes: 0
Input regions: 0
Mesh points: 342
Mesh tetrahedra: 1038
Mesh faces: 2368
Mesh faces on exterior boundary: 584
Mesh faces on input facets: 584
Mesh edges on input segments: 876
Steiner points inside domain: 48
Done meshing using TetGen!
Getting volume mesh for body 3 (of 7)
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = cone, index = 1
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.048291
Creating surface mesh ...
Surface mesh seconds: 0.00139
Recovering boundaries...
Boundary recovery seconds: 0.007431
Removing exterior tetrahedra ...
Spreading region attributes.
Exterior tets removal seconds: 0.001363
Recovering Delaunayness...
Delaunay recovery seconds: 0.012897
Refining mesh...
650 insertions, added 167 points, 7377 tetrahedra in queue.
216 insertions, added 8 points, 5933 tetrahedra in queue.
288 insertions, added 11 points, 2914 tetrahedra in queue.
384 insertions, added 11 points, 392 tetrahedra in queue.
512 insertions, added 15 points, 93 tetrahedra in queue.
Refinement seconds: 0.122955
Smoothing vertices...
Mesh smoothing seconds: 0.044704
Improving mesh...
Mesh improvement seconds: 0.000907
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.000189
Total running seconds: 0.240236
Statistics:
Input points: 488
Input facets: 972
Input segments: 1458
Input holes: 0
Input regions: 0
Mesh points: 706
Mesh tetrahedra: 2870
Mesh faces: 6226
Mesh faces on exterior boundary: 972
Mesh faces on input facets: 972
Mesh edges on input segments: 1458
Steiner points inside domain: 218
Done meshing using TetGen!
Getting volume mesh for body 4 (of 7)
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = torus, index = 1
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.358843
Creating surface mesh ...
Surface mesh seconds: 0.006283
Recovering boundaries...
Boundary recovery seconds: 0.014278
Removing exterior tetrahedra ...
Spreading region attributes.
Exterior tets removal seconds: 0.005901
Recovering Delaunayness...
Delaunay recovery seconds: 0.103501
Refining mesh...
Refinement seconds: 0.280189
Smoothing vertices...
Mesh smoothing seconds: 0.233836
Improving mesh...
Mesh improvement seconds: 0.004569
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.001568
Total running seconds: 1.00932
Statistics:
Input points: 2048
Input facets: 4096
Input segments: 6144
Input holes: 0
Input regions: 0
Mesh points: 2904
Mesh tetrahedra: 11373
Mesh faces: 24794
Mesh faces on exterior boundary: 4096
Mesh faces on input facets: 4096
Mesh edges on input segments: 6144
Steiner points inside domain: 856
Done meshing using TetGen!
Getting volume mesh for body 5 (of 7)
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = sphere, index = 1
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.000533
Creating surface mesh ...
Surface mesh seconds: 0.000295
Recovering boundaries...
Boundary recovery seconds: 0.000371
Removing exterior tetrahedra ...
Spreading region attributes.
Exterior tets removal seconds: 0.000109
Recovering Delaunayness...
Delaunay recovery seconds: 0.000642
Refining mesh...
202 insertions, added 46 points, 0 tetrahedra in queue.
Refinement seconds: 0.004648
Smoothing vertices...
Mesh smoothing seconds: 0.003462
Improving mesh...
Mesh improvement seconds: 0.000248
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.000164
Total running seconds: 0.010531
Statistics:
Input points: 152
Input facets: 300
Input segments: 450
Input holes: 0
Input regions: 0
Mesh points: 198
Mesh tetrahedra: 672
Mesh faces: 1494
Mesh faces on exterior boundary: 300
Mesh faces on input facets: 300
Mesh edges on input segments: 450
Steiner points inside domain: 46
Done meshing using TetGen!
Getting volume mesh for body 6 (of 7)
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = boxhole, index = 1
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.038075
Creating surface mesh ...
Surface mesh seconds: 0.00124
Recovering boundaries...
Boundary recovery seconds: 0.004476
Removing exterior tetrahedra ...
Spreading region attributes.
Exterior tets removal seconds: 0.001252
Recovering Delaunayness...
Delaunay recovery seconds: 0.005478
Refining mesh...
831 insertions, added 215 points, 5504 tetrahedra in queue.
Refinement seconds: 0.056113
Smoothing vertices...
Mesh smoothing seconds: 0.047691
Improving mesh...
Mesh improvement seconds: 0.001377
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.00045
Total running seconds: 0.156322
Statistics:
Input points: 624
Input facets: 1248
Input segments: 1872
Input holes: 0
Input regions: 0
Mesh points: 846
Mesh tetrahedra: 3169
Mesh faces: 6962
Mesh faces on exterior boundary: 1248
Mesh faces on input facets: 1248
Mesh edges on input segments: 1872
Steiner points inside domain: 222
Done meshing using TetGen!
Getting volume mesh for body 7 (of 7)
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = bullet, index = 1
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.027857
Creating surface mesh ...
Surface mesh seconds: 0.00074
Recovering boundaries...
Boundary recovery seconds: 0.032249
Removing exterior tetrahedra ...
Spreading region attributes.
Exterior tets removal seconds: 0.000723
Suppressing Steiner points ...
Steiner suppression seconds: 2.9e-05
Recovering Delaunayness...
Delaunay recovery seconds: 0.026562
Refining mesh...
Refinement seconds: 0.03882
Smoothing vertices...
Mesh smoothing seconds: 0.029147
Improving mesh...
Mesh improvement seconds: 0.00096
Jettisoning redundant points.
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.000308
Total running seconds: 0.157867
Statistics:
Input points: 488
Input facets: 972
Input segments: 1458
Input holes: 0
Input regions: 0
Mesh points: 672
Mesh tetrahedra: 2513
Mesh faces: 5512
Mesh faces on exterior boundary: 972
Mesh faces on input facets: 972
Mesh edges on input segments: 1458
Steiner points inside domain: 184
Done meshing using TetGen!
Writing AFLR3 file ....
Finished writing AFLR3 file
Writing AFLR3 file ....
Finished writing AFLR3 file
Writing AFLR3 file ....
Finished writing AFLR3 file
Writing AFLR3 file ....
Finished writing AFLR3 file
Writing AFLR3 file ....
Finished writing AFLR3 file
Writing AFLR3 file ....
Finished writing AFLR3 file
Writing AFLR3 file ....
Finished writing AFLR3 file
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 7
Name = box, index = 1
Name = cylinder, index = 2
Name = cone, index = 3
Name = torus, index = 4
Name = sphere, index = 5
Name = boxhole, index = 6
Name = bullet, index = 7
Warning: No capsGroup/capsIgnore attribute found on edge 1 of face 1, unable to assign a boundary index value
Warning: No capsGroup/capsIgnore attribute found on edge 2 of face 1, unable to assign a boundary index value
Body 1 number of surface: nodes - 98, elements - 192
Body 2 number of surface: nodes - 294, elements - 584
Body 3 number of surface: nodes - 488, elements - 972
Body 4 number of surface: nodes - 2048, elements - 4096
Body 5 number of surface: nodes - 152, elements - 300
Body 6 number of surface: nodes - 624, elements - 1248
Body 7 number of surface: nodes - 488, elements - 972
Getting volume mesh
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.002216
Creating surface mesh ...
Surface mesh seconds: 0.000296
Recovering boundaries...
Boundary recovery seconds: 0.000772
Removing exterior tetrahedra ...
Spreading region attributes.
Exterior tets removal seconds: 7.9e-05
Recovering Delaunayness...
Delaunay recovery seconds: 0.000994
Refining mesh...
Refinement seconds: 0.000449
Smoothing vertices...
Mesh smoothing seconds: 0.003229
Improving mesh...
Mesh improvement seconds: 0.000143
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 8.1e-05
Total running seconds: 0.008315
Statistics:
Input points: 98
Input facets: 192
Input segments: 288
Input holes: 0
Input regions: 1
Mesh points: 100
Mesh tetrahedra: 232
Mesh faces: 560
Mesh faces on exterior boundary: 192
Mesh faces on input facets: 192
Mesh edges on input segments: 288
Steiner points inside domain: 2
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.013912
Creating surface mesh ...
Surface mesh seconds: 0.00057
Recovering boundaries...
Boundary recovery seconds: 0.002081
Removing exterior tetrahedra ...
Warning: The 1-th region point lies outside the convex hull.
Spreading region attributes.
Exterior tets removal seconds: 0.000465
Recovering Delaunayness...
Delaunay recovery seconds: 0.003848
Refining mesh...
Refinement seconds: 0.019839
Smoothing vertices...
Mesh smoothing seconds: 0.016967
Improving mesh...
Mesh improvement seconds: 0.000567
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.000166
Total running seconds: 0.058569
Statistics:
Input points: 294
Input facets: 584
Input segments: 876
Input holes: 0
Input regions: 2
Mesh points: 342
Mesh tetrahedra: 1038
Mesh faces: 2368
Mesh faces on exterior boundary: 584
Mesh faces on input facets: 584
Mesh edges on input segments: 876
Steiner points inside domain: 48
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.053847
Creating surface mesh ...
Surface mesh seconds: 0.001188
Recovering boundaries...
Boundary recovery seconds: 0.00707
Removing exterior tetrahedra ...
Warning: The 1-th region point lies outside the convex hull.
Warning: The 2-th region point lies outside the convex hull.
Spreading region attributes.
Exterior tets removal seconds: 0.001266
Recovering Delaunayness...
Delaunay recovery seconds: 0.0161
Refining mesh...
650 insertions, added 167 points, 7377 tetrahedra in queue.
216 insertions, added 8 points, 5933 tetrahedra in queue.
288 insertions, added 11 points, 2914 tetrahedra in queue.
384 insertions, added 11 points, 392 tetrahedra in queue.
512 insertions, added 15 points, 93 tetrahedra in queue.
Refinement seconds: 0.160429
Smoothing vertices...
Mesh smoothing seconds: 0.056367
Improving mesh...
Mesh improvement seconds: 0.001443
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.000342
Total running seconds: 0.298184
Statistics:
Input points: 488
Input facets: 972
Input segments: 1458
Input holes: 0
Input regions: 3
Mesh points: 706
Mesh tetrahedra: 2870
Mesh faces: 6226
Mesh faces on exterior boundary: 972
Mesh faces on input facets: 972
Mesh edges on input segments: 1458
Steiner points inside domain: 218
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.372843
Creating surface mesh ...
Surface mesh seconds: 0.00486
Recovering boundaries...
Boundary recovery seconds: 0.01073
Removing exterior tetrahedra ...
Warning: The 1-th region point lies outside the convex hull.
Warning: The 2-th region point lies outside the convex hull.
Warning: The 3-th region point lies outside the convex hull.
Spreading region attributes.
Exterior tets removal seconds: 0.004734
Recovering Delaunayness...
Delaunay recovery seconds: 0.107425
Refining mesh...
Refinement seconds: 0.292528
Smoothing vertices...
Mesh smoothing seconds: 0.215201
Improving mesh...
Mesh improvement seconds: 0.004346
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.001176
Total running seconds: 1.01414
Statistics:
Input points: 2048
Input facets: 4096
Input segments: 6144
Input holes: 0
Input regions: 4
Mesh points: 2912
Mesh tetrahedra: 11359
Mesh faces: 24766
Mesh faces on exterior boundary: 4096
Mesh faces on input facets: 4096
Mesh edges on input segments: 6144
Steiner points inside domain: 864
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.000486
Creating surface mesh ...
Surface mesh seconds: 0.000398
Recovering boundaries...
Boundary recovery seconds: 0.000553
Removing exterior tetrahedra ...
Warning: The 1-th region point lies outside the convex hull.
Warning: The 2-th region point lies outside the convex hull.
Warning: The 3-th region point lies outside the convex hull.
Warning: The 4-th region point lies outside the convex hull.
Spreading region attributes.
Exterior tets removal seconds: 0.000257
Recovering Delaunayness...
Delaunay recovery seconds: 0.000556
Refining mesh...
202 insertions, added 46 points, 0 tetrahedra in queue.
Refinement seconds: 0.004526
Smoothing vertices...
Mesh smoothing seconds: 0.003195
Improving mesh...
Mesh improvement seconds: 0.000197
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 5.1e-05
Total running seconds: 0.010304
Statistics:
Input points: 152
Input facets: 300
Input segments: 450
Input holes: 0
Input regions: 5
Mesh points: 198
Mesh tetrahedra: 672
Mesh faces: 1494
Mesh faces on exterior boundary: 300
Mesh faces on input facets: 300
Mesh edges on input segments: 450
Steiner points inside domain: 46
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.039636
Creating surface mesh ...
Surface mesh seconds: 0.001287
Recovering boundaries...
Boundary recovery seconds: 0.004226
Removing exterior tetrahedra ...
Warning: The 1-th region point lies outside the convex hull.
Warning: The 2-th region point lies outside the convex hull.
Warning: The 3-th region point lies outside the convex hull.
Warning: The 4-th region point lies outside the convex hull.
Warning: The 5-th region point lies outside the convex hull.
Spreading region attributes.
Exterior tets removal seconds: 0.001503
Recovering Delaunayness...
Delaunay recovery seconds: 0.006158
Refining mesh...
831 insertions, added 215 points, 5504 tetrahedra in queue.
Refinement seconds: 0.064334
Smoothing vertices...
Mesh smoothing seconds: 0.046199
Improving mesh...
Mesh improvement seconds: 0.001269
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.000325
Total running seconds: 0.165128
Statistics:
Input points: 624
Input facets: 1248
Input segments: 1872
Input holes: 0
Input regions: 6
Mesh points: 846
Mesh tetrahedra: 3169
Mesh faces: 6962
Mesh faces on exterior boundary: 1248
Mesh faces on input facets: 1248
Mesh edges on input segments: 1872
Steiner points inside domain: 222
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000T1.00e-16A
Delaunizing vertices...
Delaunay seconds: 0.039137
Creating surface mesh ...
Surface mesh seconds: 0.001077
Recovering boundaries...
Boundary recovery seconds: 0.042428
Removing exterior tetrahedra ...
Warning: The 1-th region point lies outside the convex hull.
Warning: The 2-th region point lies outside the convex hull.
Warning: The 3-th region point lies outside the convex hull.
Warning: The 4-th region point lies outside the convex hull.
Warning: The 5-th region point lies outside the convex hull.
Warning: The 6-th region point lies outside the convex hull.
Spreading region attributes.
Exterior tets removal seconds: 0.001031
Suppressing Steiner points ...
Steiner suppression seconds: 2e-05
Recovering Delaunayness...
Delaunay recovery seconds: 0.032031
Refining mesh...
Refinement seconds: 0.04696
Smoothing vertices...
Mesh smoothing seconds: 0.037032
Improving mesh...
Mesh improvement seconds: 0.001438
Jettisoning redundant points.
Writing nodes.
Writing elements.
Writing faces.
Writing edges.
Output seconds: 0.000395
Total running seconds: 0.202165
Statistics:
Input points: 488
Input facets: 972
Input segments: 1458
Input holes: 0
Input regions: 7
Mesh points: 673
Mesh tetrahedra: 2528
Mesh faces: 5542
Mesh faces on exterior boundary: 972
Mesh faces on input facets: 972
Mesh edges on input segments: 1458
Steiner points inside domain: 185
Done meshing using TetGen!
Writing AFLR3 file ....
Finished writing AFLR3 file
ok
test_journal (test_tetgen.TestTETGEN.test_journal) ... Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 3
Name = Farfield, index = 1
Name = Wing1, index = 2
Name = trailingEdge, index = 3
Getting mesh sizing parameters
Mesh sizing name - Farfield
Done getting mesh sizing parameters
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Number of surface: nodes - 9601, elements - 19194
Getting volume mesh
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Done meshing using TetGen!
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Number of surface: nodes - 9601, elements - 19194
Getting volume mesh
Generating volume mesh using TetGen.....
Tetgen input string = pYq2.000/0.000QT1.00e-16A
Done meshing using TetGen!
EGADS Info: 0 Objects, 0 Reference in Use (of 0) at Close!
CAPS Info: Hit last success -- going live!
CAPS Info: Hit last success -- going live!
CAPS Info: Hit last success -- going live!
CAPS Info: Hit last success -- going live!
CAPS Info: Hit last success -- going live!
CAPS Info: Hit last success -- going live!
CAPS Info: Hit last success -- going live!
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 3
Name = Farfield, index = 1
Name = Wing1, index = 2
Name = trailingEdge, index = 3
Getting mesh sizing parameters
Mesh sizing name - Farfield
Done getting mesh sizing parameters
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Number of surface: nodes - 9601, elements - 19194
Getting volume mesh
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Done meshing using TetGen!
CAPS Info: Hit last success -- going live!
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 3
Name = Farfield, index = 1
Name = Wing1, index = 2
Name = trailingEdge, index = 3
Getting mesh sizing parameters
Mesh sizing name - Farfield
Done getting mesh sizing parameters
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
CAPS Info: Hit last success -- going live!
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 3
Name = Farfield, index = 1
Name = Wing1, index = 2
Name = trailingEdge, index = 3
Getting mesh sizing parameters
Mesh sizing name - Farfield
Done getting mesh sizing parameters
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
CAPS Info: Hit last success -- going live!
CAPS Info: Hit last success -- going live!
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 3
Name = Farfield, index = 1
Name = Wing1, index = 2
Name = trailingEdge, index = 3
Getting mesh sizing parameters
Mesh sizing name - Farfield
Done getting mesh sizing parameters
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Number of surface: nodes - 9601, elements - 19194
Getting volume mesh
Generating volume mesh using TetGen.....
Tetgen input string = pYq2.000/0.000QT1.00e-16A
Done meshing using TetGen!
CAPS Info: Hit last success -- going live!
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 3
Name = Farfield, index = 1
Name = Wing1, index = 2
Name = trailingEdge, index = 3
Getting mesh sizing parameters
Mesh sizing name - Farfield
Done getting mesh sizing parameters
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
ok
test_phase (test_tetgen.TestTETGEN.test_phase) ... Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 3
Name = Farfield, index = 1
Name = Wing1, index = 2
Name = trailingEdge, index = 3
Getting mesh sizing parameters
Mesh sizing name - Farfield
Done getting mesh sizing parameters
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Number of surface: nodes - 9601, elements - 19194
Getting volume mesh
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Done meshing using TetGen!
Writing TECPLOT file: test.dat ....
Finished writing TECPLOT file
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 3
Name = Farfield, index = 1
Name = Wing1, index = 2
Name = trailingEdge, index = 3
Getting mesh sizing parameters
Mesh sizing name - Farfield
Done getting mesh sizing parameters
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 3
Name = Farfield, index = 1
Name = Wing1, index = 2
Name = trailingEdge, index = 3
Getting mesh sizing parameters
Mesh sizing name - Farfield
Done getting mesh sizing parameters
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Number of surface: nodes - 7173, elements - 14338
Getting volume mesh
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Done meshing using TetGen!
Writing TECPLOT file: test.dat ....
Finished writing TECPLOT file
ok
test_reenter (test_tetgen.TestTETGEN.test_reenter) ... Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 3
Name = Farfield, index = 1
Name = Wing1, index = 2
Name = trailingEdge, index = 3
Getting mesh sizing parameters
Mesh sizing name - Farfield
Done getting mesh sizing parameters
Getting surface mesh for body 1 (of 1)
Body 1 (of 1)
Number of nodes = 9601
Number of elements = 19194
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 19194
Number of quadrilateral elements = 0
----------------------------
Total number of nodes = 9601
Total number of elements = 19194
Writing TECPLOT file: test.dat ....
Finished writing TECPLOT file
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Number of surface: nodes - 9601, elements - 19194
Getting volume mesh
Generating volume mesh using TetGen.....
Tetgen input string = pYq1.500/0.000QT1.00e-16A
Done meshing using TetGen!
Writing TECPLOT file: test.dat ....
Finished writing TECPLOT file
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 2
Name = Farfield, index = 1
Name = Wing1, index = 2
Number of surface: nodes - 9601, elements - 19194
Getting volume mesh
Generating volume mesh using TetGen.....
Tetgen input string = pYq2.000/0.000QT1.00e-16A
Done meshing using TetGen!
Writing TECPLOT file: test.dat ....
Finished writing TECPLOT file
ok
test_setInput (test_tetgen.TestTETGEN.test_setInput) ... EGADS Info: 0 Objects, 0 Reference in Use (of 0) at Close!
ok
test_Cl (test_xfoil.Testxfoil_Kulfan.test_Cl) ... ok
test_alpha_custom_increment (test_xfoil.Testxfoil_Kulfan.test_alpha_custom_increment) ... ok
test_CL_uniform_increment (test_xfoil.Testxfoil_NACA.test_CL_uniform_increment) ... ok
test_Cl (test_xfoil.Testxfoil_NACA.test_Cl) ... ok
test_alpha_custom_increment (test_xfoil.Testxfoil_NACA.test_alpha_custom_increment) ... ok
test_alpha_uniform_inrement (test_xfoil.Testxfoil_NACA.test_alpha_uniform_inrement) ... ok
test_append (test_xfoil.Testxfoil_NACA.test_append) ... ok
test_normalize (test_xfoil.Testxfoil_NACA.test_normalize) ... ok
test_phase (test_xfoil.Testxfoil_NACA.test_phase) ... ok
test_Output (test_zaero.TestZAERO.test_Output) ... ok
test_inputs (test_zaero.TestZAERO.test_inputs) ... Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 6
Name = Ribs, index = 1
Name = Skin, index = 2
Name = Spar1, index = 3
Name = Rib_Root, index = 4
Name = Spar2, index = 5
Name = Rib_Root_Point, index = 6
Mapping capsMesh attributes ................
Number of unique capsMesh attributes = 2
Name = LeadingEdge, index = 1
Name = TrailingEdge, index = 2
Getting surface mesh for body 1 (of 2)
Getting surface mesh for body 2 (of 2)
Body 1 (of 2)
Number of nodes = 1220
Number of elements = 2680
Number of node elements = 0
Number of line elements = 0
Number of triangle elements = 2680
Number of quadrilateral elements = 0
Body 2 (of 2)
Number of nodes = 1
Number of elements = 1
Number of node elements = 1
Number of line elements = 0
Number of triangle elements = 0
Number of quadrilateral elements = 0
----------------------------
Total number of nodes = 1221
Total number of elements = 2681
Mapping Csys attributes ................
Number of unique Csys attributes = 0
Getting FEA coordinate systems.......
Number of coordinate systems - 0
No coordinate systems found - defaulting to global
Mapping capsConstraint attributes ................
Number of unique capsConstraint attributes = 1
Name = Rib_Root_Point, index = 1
Mapping capsLoad attributes ................
Number of unique capsLoad attributes = 0
Mapping capsBound attributes ................
Number of unique capsBound attributes = 1
Name = Skin_Top, index = 1
Mapping capsConnect attributes ................
Number of unique capsConnect attributes = 1
Name = Rib_Root, index = 1
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 6
Name = Ribs, index = 1
Name = Skin, index = 2
Name = Spar1, index = 3
Name = Rib_Root, index = 4
Name = Spar2, index = 5
Name = Rib_Root_Point, index = 6
Setting FEA Data
Mesh for body = 0
Number of nodal coordinates = 1220
Number of elements = 2680
Elemental Nodes = 0
Elemental Rods = 0
Elemental Tria3 = 2680
Elemental Quad4 = 0
Setting FEA Data
Mesh for body = 1
Number of nodal coordinates = 1
Number of elements = 1
Elemental Nodes = 1
Elemental Rods = 0
Elemental Tria3 = 0
Elemental Quad4 = 0
Combining multiple FEA meshes!
Combined Number of nodal coordinates = 1221
Combined Number of elements = 2681
Combined Elemental Nodes = 1
Combined Elemental Rods = 0
Combined Elemental Tria3 = 2680
Combined Elemental Quad4 = 0
Getting FEA materials.......
Number of materials - 1
Material name - madeupium
Done getting FEA materials
Getting FEA properties.......
Number of properties - 6
Property name - Rib_Root
Property name - Rib_Root_Point
Property name - Ribs
Property name - Skin
Property name - Spar1
Property name - Spar2
Done getting FEA properties
Updating mesh element types based on properties input
'Smart_Restart' is ON
Mapping capsGroup attributes ................
Number of unique capsGroup attributes = 1
Name = Wing, index = 1
Getting vortex lattice surface data
VLM surface name - WingSurface
Done getting vortex lattice surface data
Getting vortex lattice control surface data
VLM control surface name - CntrlLE
VLM control surface name - CntrlTE
Done getting vortex lattice control surface data
Getting FEA vortex lattice mesh
Getting ZAERO UAIC Configurations.......
Number of UAIC Configurations - 2
UAIC Configuration: climb, id = 1
- Mach Number : 0.200000
- Reduced Freq: [0.020000, ... , 0.250000]
UAIC Configuration: cruise, id = 2
- Mach Number : 0.700000
- Reduced Freq: [0.040000, ... , 0.350000]
Getting ZAERO Analysis Subcases.......
Number of Analysis Subcases - 2
Analysis Subcase: FlutterCruise, id = 1
- Discipline : flutter
- UAIC : cruise
Analysis Subcase: Trim, id = 2
- Discipline : Trim
- UAIC : climb
Getting ZAERO Trim Variables.......
Number of Trim Variables - 2
Trim Variable: ANGLEA
- Label : ALPHA
- Value : free
Trim Variable: URDD3
- Label : NZ
- Value : 1.0
ERROR
Fatal Python error: Aborted
Current thread 0x0000000119635e00 (most recent call first):
File "/Users/jenkins/workspace/ESP_RegCaps/7.8/CAPS/unit/DARWIN64/CAPS/pyCAPS/pyCAPS/caps.py", line 987 in _close_capsProblem
File "/usr/local/Cellar/python@3.11/3.11.5/Frameworks/Python.framework/Versions/3.11/lib/python3.11/weakref.py", line 590 in __call__
File "/Users/jenkins/workspace/ESP_RegCaps/7.8/CAPS/unit/DARWIN64/CAPS/pyCAPS/pyCAPS/caps.py", line 1174 in __del__
File "/Users/jenkins/workspace/ESP_RegCaps/7.8/CAPS/unit/DARWIN64/CAPS/pyCAPS/pyCAPS/caps.py", line 1177 in __del__
File "/Users/jenkins/workspace/ESP_RegCaps/7.8/CAPS/unit/DARWIN64/CAPS/aim/unitTest/pyCAPS/test_zaero.py", line 72 in tearDownClass
File "/usr/local/Cellar/python@3.11/3.11.5/Frameworks/Python.framework/Versions/3.11/lib/python3.11/unittest/suite.py", line 306 in _tearDownPreviousClass
File "/usr/local/Cellar/python@3.11/3.11.5/Frameworks/Python.framework/Versions/3.11/lib/python3.11/unittest/suite.py", line 130 in run
File "/usr/local/Cellar/python@3.11/3.11.5/Frameworks/Python.framework/Versions/3.11/lib/python3.11/unittest/suite.py", line 84 in __call__
File "/usr/local/Cellar/python@3.11/3.11.5/Frameworks/Python.framework/Versions/3.11/lib/python3.11/unittest/runner.py", line 217 in run
File "/usr/local/Cellar/python@3.11/3.11.5/Frameworks/Python.framework/Versions/3.11/lib/python3.11/unittest/main.py", line 274 in runTests
File "/usr/local/Cellar/python@3.11/3.11.5/Frameworks/Python.framework/Versions/3.11/lib/python3.11/unittest/main.py", line 102 in __init__
File "/usr/local/Cellar/python@3.11/3.11.5/Frameworks/Python.framework/Versions/3.11/lib/python3.11/unittest/__main__.py", line 18 in <module>
File "<frozen runpy>", line 88 in _run_code
File "<frozen runpy>", line 198 in _run_module_as_main
Extension modules: numpy.core._multiarray_umath, numpy.core._multiarray_tests, numpy.linalg._umath_linalg, numpy.fft._pocketfft_internal, numpy.random._common, numpy.random.bit_generator, numpy.random._bounded_integers, numpy.random._mt19937, numpy.random.mtrand, numpy.random._philox, numpy.random._pcg64, numpy.random._sfc64, numpy.random._generator, fun3dNamelist (total: 14)
make[1]: *** [test] Abort trap: 6
make: *** [unitaim] Error 2
++ set +x
[Execution node] check if [macys_VM] is in [[windows10x64]]
Run condition [Execution node ] preventing perform for step [Execute Windows batch command]
[GNU C Compiler (gcc)] Parsing console log (workspace: '/Users/jenkins/workspace/ESP_RegCaps/7.8/CAPS/unit/DARWIN64')
[GNU C Compiler (gcc)] Successfully parsed console log
[GNU C Compiler (gcc)] -> found 0 issues (skipped 0 duplicates)
[GNU C Compiler (gcc)] Skipping post processing
[GNU C Compiler (gcc)] No filter has been set, publishing all 0 issues
[GNU C Compiler (gcc)] Repository miner is not configured, skipping repository mining
[Clang] Parsing console log (workspace: '/Users/jenkins/workspace/ESP_RegCaps/7.8/CAPS/unit/DARWIN64')
[Clang] -> found 0 issues (skipped 0 duplicates)
[Clang] Parsing console log (workspace: '/Users/jenkins/workspace/ESP_RegCaps/7.8/CAPS/unit/DARWIN64')
[Clang] -> found 0 issues (skipped 0 duplicates)
[Clang] Successfully parsed console log
[Clang] -> found 0 issues (skipped 0 duplicates)
[Clang] Parsing console log (workspace: '/Users/jenkins/workspace/ESP_RegCaps/7.8/CAPS/unit/DARWIN64')
[Clang] Skipping post processing
[Clang] No filter has been set, publishing all 0 issues
[Clang] Repository miner is not configured, skipping repository mining
[Static Analysis] Successfully parsed console log
[Static Analysis] -> found 0 issues (skipped 0 duplicates)
[Static Analysis] Parsing console log (workspace: '/Users/jenkins/workspace/ESP_RegCaps/7.8/CAPS/unit/DARWIN64')
[Static Analysis] Successfully parsed console log
[Static Analysis] -> found 0 issues (skipped 0 duplicates)
[Static Analysis] Skipping post processing
[Static Analysis] No filter has been set, publishing all 0 issues
[Static Analysis] Repository miner is not configured, skipping repository mining
[Static Analysis] Successfully parsed console log
[Static Analysis] -> found 0 issues (skipped 0 duplicates)
[Static Analysis] Successfully parsed console log
[Static Analysis] -> found 0 issues (skipped 0 duplicates)
[Static Analysis] Successfully parsed console log
[Static Analysis] -> found 0 issues (skipped 0 duplicates)
[Static Analysis] Parsing console log (workspace: '/Users/jenkins/workspace/ESP_RegCaps/7.8/CAPS/unit/DARWIN64')
[Static Analysis] Skipping post processing
[Static Analysis] No filter has been set, publishing all 0 issues
[Static Analysis] Repository miner is not configured, skipping repository mining
[Static Analysis] Reference build recorder is not configured
[Static Analysis] No valid reference build found
[Static Analysis] All reported issues will be considered outstanding
[Static Analysis] No quality gates have been set - skipping
[Static Analysis] Health report is disabled - skipping
[Static Analysis] Created analysis result for 0 issues (found 0 new issues, fixed 0 issues)
[Static Analysis] Attaching ResultAction with ID 'analysis' to build 'ESP_RegCaps/CASREV=7.8,ESPTEST=CAPS/unit,ESP_ARCH=DARWIN64,buildnode=macys_VM #634'.
[Checks API] No suitable checks publisher found.
Build step 'Console output (build log) parsing' changed build result to FAILURE
[PostBuildScript] - [INFO] Executing post build scripts.
[PostBuildScript] - [INFO] build step #0 should only be executed on MATRIX
[WS-CLEANUP] Deleting project workspace...
[WS-CLEANUP] Skipped based on build state FAILURE
Finished: FAILURE